-
Band Gap Opening in Bilayer Graphene-CrCl$_3$/CrBr$_3$/CrI$_3$ van der Waals Interfaces
Authors:
Giulia Tenasini,
David Soler-Delgado,
Zhe Wang,
Fengrui Yao,
Dumitru Dumcenco,
Enrico Giannini,
Kenji Watanabe,
Takashi Taniguchi,
Christian Moulsdale,
Aitor Garcia-Ruiz,
Vladimir I. Fal'ko,
Ignacio Gutiérrez-Lezama,
Alberto F. Morpurgo
Abstract:
We report experimental investigations of transport through bilayer graphene (BLG)/chromium trihalide (CrX$_3$; X=Cl, Br, I) van der Waals interfaces. In all cases, a large charge transfer from BLG to CrX$_3$ takes place (reaching densities in excess of $10^{13}$ cm$^{-2}$), and generates an electric field perpendicular to the interface that opens a band gap in BLG. We determine the gap from the ac…
▽ More
We report experimental investigations of transport through bilayer graphene (BLG)/chromium trihalide (CrX$_3$; X=Cl, Br, I) van der Waals interfaces. In all cases, a large charge transfer from BLG to CrX$_3$ takes place (reaching densities in excess of $10^{13}$ cm$^{-2}$), and generates an electric field perpendicular to the interface that opens a band gap in BLG. We determine the gap from the activation energy of the conductivity and find excellent agreement with the latest theory accounting for the contribution of the $σ$ bands to the BLG dielectric susceptibility. We further show that for BLG/CrCl$_3$ and BLG/CrBr$_3$ the band gap can be extracted from the gate voltage dependence of the low-temperature conductivity, and use this finding to refine the gap dependence on the magnetic field. Our results allow a quantitative comparison of the electronic properties of BLG with theoretical predictions and indicate that electrons occupying the CrX$_3$ conduction band are correlated.
△ Less
Submitted 24 August, 2022; v1 submitted 5 July, 2022;
originally announced July 2022.
-
Probing magnetism in exfoliated VI$_3$ layers with magnetotransport
Authors:
David Soler-Delgado,
Feng-rui Yao,
Dumitru Dumcenco,
Enrico Giannini,
Jiaruo Li,
Connor A. Occhialini,
Riccardo Comin,
Nicolas Ubrig,
Alberto F. Morpurgo
Abstract:
We perform magnetotransport experiments on VI$_3$ multilayers, to investigate the relation between ferromagnetism in bulk and in exfoliated layers. The magnetoconductance measured on field-effect transistors and tunnel barriers shows that the Curie temperature of exfoliated multilayers is $T_C$ = 57 K, larger than in bulk ($T_{\rm C,bulk}$ = 50 K). Below $T \approx$ 40 K, we observe an unusual evo…
▽ More
We perform magnetotransport experiments on VI$_3$ multilayers, to investigate the relation between ferromagnetism in bulk and in exfoliated layers. The magnetoconductance measured on field-effect transistors and tunnel barriers shows that the Curie temperature of exfoliated multilayers is $T_C$ = 57 K, larger than in bulk ($T_{\rm C,bulk}$ = 50 K). Below $T \approx$ 40 K, we observe an unusual evolution of the tunneling magnetoconductance, analogous to the phenomenology observed in bulk. Comparing the magnetoconductance measured for fields applied in- or out-of-plane corroborates the analogy, allows us to determine that the orientation of the easy-axis in multilayers is similar to that in bulk, and suggests that the in-plane component of the magnetization points in different directions in different layers. Besides establishing that the magnetic state of bulk and multilayers are similar, our experiments illustrate the complementarity of magnetotransport and magneto-optical measurements to probe magnetism in 2D materials.
△ Less
Submitted 3 August, 2022; v1 submitted 21 April, 2022;
originally announced April 2022.
-
Magnetization dependent tunneling conductance of ferromagnetic barriers
Authors:
Zhe Wang,
Ignacio Gutiérrez-Lezama,
Dumitru Dumcenco,
Nicolas Ubrig,
Takashi Taniguchi,
Kenji Watanabe,
Enrico Giannini,
Marco Gibertini,
Alberto F. Morpurgo
Abstract:
Recent experiments on van der Waals antiferrmagnets such as CrI3, CrCl3 and MnPS3 have shown that using atomically thin layers as tunnel barriers and measuring the temperature ($T$) and magnetic field ($H$) dependence of the conductance allows their magnetic phase diagram to be mapped. In contrast, barriers made of CrBr3 -- the sole van der Waals ferromagnet investigated in this way -- were found…
▽ More
Recent experiments on van der Waals antiferrmagnets such as CrI3, CrCl3 and MnPS3 have shown that using atomically thin layers as tunnel barriers and measuring the temperature ($T$) and magnetic field ($H$) dependence of the conductance allows their magnetic phase diagram to be mapped. In contrast, barriers made of CrBr3 -- the sole van der Waals ferromagnet investigated in this way -- were found to exhibit small and featureless magnetoconductance, seemingly carrying little information about magnetism. Here we show that -- despite these early results -- the conductance of CrBr3 tunnel barriers does provide detailed information about the magnetic state of atomically thin CrBr3 crystals for $T$ both above and below the Curie temperature ($T_C = 32$ K). Our analysis establishes that the tunneling conductance depends on $H$ and $T$ exclusively through the magnetization $M(H,T)$, over the entire temperature range investigated (2-50 K). The phenomenon is reproduced in detail by the spin-dependent Fowler-Nordheim model for tunneling, and is a direct manifestation of the spin splitting of the CrBr3 conduction band. These findings demonstrate that the investigation of magnetism by tunneling conductance measurements is not limited to antiferromagnets, but can also be applied to ferromagnetic materials.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
Strongly coupled coherent phonons in single-layer MoS$_2$
Authors:
C. Trovatello,
H. P. C. Miranda,
A. Molina-Sánchez,
R. Borrego Varillas,
C. Manzoni,
L. Moretti,
L. Ganzer,
M. Maiuri,
J. Wang,
D. Dumcenco,
A. Kis,
L. Wirtz,
A. Marini,
G. Soavi,
A. C. Ferrari,
G. Cerullo,
D. Sangalli,
S. Dal Conte
Abstract:
We present a transient absorption setup combining broadband detection over the visible-UV range with high temporal resolution ($\sim$20fs) which is ideally suited to trigger and detect vibrational coherences in different classes of materials. We generate and detect coherent phonons (CPs) in single layer (1L) MoS$_2$, as a representative semiconducting 1L-transition metal dichalcogenide (TMD), wher…
▽ More
We present a transient absorption setup combining broadband detection over the visible-UV range with high temporal resolution ($\sim$20fs) which is ideally suited to trigger and detect vibrational coherences in different classes of materials. We generate and detect coherent phonons (CPs) in single layer (1L) MoS$_2$, as a representative semiconducting 1L-transition metal dichalcogenide (TMD), where the confined dynamical interaction between excitons and phonons is unexplored. The coherent oscillatory motion of the out-of-plane $A'_{1}$ phonons, triggered by the ultrashort laser pulses, dynamically modulates the excitonic resonances on a timescale of few tens fs. We observe an enhancement by almost two orders of magnitude of the CP amplitude when detected in resonance with the C exciton peak, combined with a resonant enhancement of CP generation efficiency. Ab initio calculations of the change in 1L-MoS$_2$ band structure induced by the $A'_{1}$ phonon displacement confirm a strong coupling with the C exciton. The resonant behavior of the CP amplitude follows the same spectral profile of the calculated Raman susceptibility tensor. This demonstrates that CP excitation in 1L-MoS$_2$ can be described as a Raman-like scattering process. These results explain the CP generation process in 1L-TMDs, paving the way for coherent all-optical control of excitons in layered materials in the THz frequency range.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.
-
Determining the phase diagram of atomically thin layered antiferromagnet CrCl$_3$
Authors:
Zhe Wang,
Marco Gibertini,
Dumitru Dumcenco,
Takashi Taniguchi,
Kenji Watanabe,
Enrico Giannini,
Alberto F. Morpurgo
Abstract:
Changes in the spin configuration of atomically-thin, magnetic van-der-Waals multilayers can cause drastic modifications in their opto-electronic properties. Conversely, the opto-electronic response of these systems provides information about the magnetic state, very difficult to obtain otherwise. Here we show that in CrCl$_3$ multilayers, the dependence of the tunnelling conductance on applied ma…
▽ More
Changes in the spin configuration of atomically-thin, magnetic van-der-Waals multilayers can cause drastic modifications in their opto-electronic properties. Conversely, the opto-electronic response of these systems provides information about the magnetic state, very difficult to obtain otherwise. Here we show that in CrCl$_3$ multilayers, the dependence of the tunnelling conductance on applied magnetic field ($H$), temperature ($T$), and number of layers ($N$) tracks the evolution of the magnetic state, enabling the magnetic phase diagram of these systems to be determined experimentally. Besides a high-field spin-flip transition occurring for all thicknesses, the in-plane magnetoconductance exhibits an even-odd effect due to a low-field spin-flop transition. If the layer number $N$ is even, the transition occurs at $μ_0 H \sim 0$ T due to the very small in-plane magnetic anisotropy, whereas for odd $N$ the net magnetization of the uncompensated layer causes the transition to occur at finite $H$. Through a quantitative analysis of the phenomena, we determine the interlayer exchange coupling as well as the staggered magnetization, and show that in CrCl$_3$ shape anisotropy dominates. Our results reveal the rich behaviour of atomically-thin layered antiferromagnets with weak magnetic anisotropy.
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Spin-flop transition in atomically thin MnPS$_3$ crystals
Authors:
Gen Long,
Hugo Henck,
Marco Gibertini,
Dumitru Dumcenco,
Zhe Wang,
Takashi Taniguchi,
Kenji Watanabe,
Enrico Giannini,
Alberto F. Morpurgo
Abstract:
The magnetic state of atomically thin semiconducting layered antiferromagnets such as CrI$_3$ and CrCl$_3$ can be probed by forming tunnel barriers and measuring their resistance as a function of magnetic field ($H$) and temperature ($T$). This is possible because the tunneling magnetoresistance originates from a spin-filtering effect sensitive to the relative orientation of the magnetization in d…
▽ More
The magnetic state of atomically thin semiconducting layered antiferromagnets such as CrI$_3$ and CrCl$_3$ can be probed by forming tunnel barriers and measuring their resistance as a function of magnetic field ($H$) and temperature ($T$). This is possible because the tunneling magnetoresistance originates from a spin-filtering effect sensitive to the relative orientation of the magnetization in different layers, i.e., to the magnetic state of the multilayers. For systems in which antiferromagnetism occurs within an individual layer, however, no spin-filtering occurs: it is unclear whether this strategy can work. To address this issue, we investigate tunnel transport through atomically thin crystals of MnPS$_3$, a van der Waals semiconductor that in the bulk exhibits easy-axis antiferromagnetic order within the layers. For thick multilayers below $T\simeq 78$ K, a $T$-dependent magnetoresistance sets-in at $\sim 5$ T, and is found to track the boundary between the antiferromagnetic and the spin-flop phases known from bulk magnetization measurements. The magnetoresistance persists down to individual MnPS$_3$ monolayers with nearly unchanged characteristic temperature and magnetic field scales, albeit with a different dependence on $H$. We discuss the implications of these finding for the magnetic state of atomically thin MnPS$_3$ crystals, conclude that antiferromagnetic correlations persist down to the level of individual monolayers, and that tunneling magnetoresistance does allow magnetism in 2D insulating materials to be detected even in the absence of spin-filtering.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
Intervalley Scattering of Interlayer Excitons in a MoS$_2$/MoSe$_2$/MoS$_2$ Heterostructure in High Magnetic Field
Authors:
Alessandro Surrente,
Lukasz Klopotowski,
Nan Zhang,
Michal Baranowski,
Anatolie A. Mitioglu,
Mariana V. Ballottin,
Peter C. M. Christianen,
Dumitru Dumcenco,
Yen-Cheng Kung,
Duncan K. Maude,
Andras Kis,
Paulina Plochocka
Abstract:
Degenerate extrema in the energy dispersion of charge carriers in solids, also referred to as valleys, can be regarded as a binary quantum degree of freedom, which can potentially be used to implement valleytronic concepts in van der Waals heterostructures based on transition metal dichalcogenides. Using magneto-photoluminescence spectroscopy, we achieve a deeper insight into the valley polarizati…
▽ More
Degenerate extrema in the energy dispersion of charge carriers in solids, also referred to as valleys, can be regarded as a binary quantum degree of freedom, which can potentially be used to implement valleytronic concepts in van der Waals heterostructures based on transition metal dichalcogenides. Using magneto-photoluminescence spectroscopy, we achieve a deeper insight into the valley polarization and depolarization mechanisms of interlayer excitons formed across a MoS$_2$/MoSe$_2$/MoS$_2$ heterostructure. We account for the non-trivial behavior of the valley polarization as a function of the magnetic field by considering the interplay between exchange interaction and phonon mediated intervalley scattering in a system consisting of Zeeman-split energy levels. Our results represent a crucial step towards the understanding of the properties of interlayer excitons, with strong implications for the implementation of atomically thin valleytronic devices.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Probing the inter-layer exciton physics in a MoS$_2$/MoSe$_2$/MoS$_2$ van der Waals heterostructure
Authors:
M. Baranowski,
A. Surrente,
L. Klopotowski,
J. M. Urban,
N. Zhang,
D. K. Maude,
K. Wiwatowski,
S. Mackowski,
Y. C. Kung,
D. Dumcenco,
A. Kis,
P. Plochocka
Abstract:
Stacking atomic monolayers of semiconducting transition metal dichalcogenides (TMDs) has emerged as an effective way to engineer their properties. In principle, the staggered band alignment of TMD heterostructures should result in the formation of inter-layer excitons with long lifetimes and robust valley polarization. However, these features have been observed simultaneously only in MoSe$_2$/WSe…
▽ More
Stacking atomic monolayers of semiconducting transition metal dichalcogenides (TMDs) has emerged as an effective way to engineer their properties. In principle, the staggered band alignment of TMD heterostructures should result in the formation of inter-layer excitons with long lifetimes and robust valley polarization. However, these features have been observed simultaneously only in MoSe$_2$/WSe$_2$ heterostructures. Here we report on the observation of long lived inter-layer exciton emission in a MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructure. The inter-layer nature of the observed transition is confirmed by photoluminescence spectroscopy, as well as by analyzing the temporal, excitation power and temperature dependence of the inter-layer emission peak. The observed complex photoluminescence dynamics suggests the presence of quasi-degenerate momentum-direct and momentum-indirect bandgaps. We show that circularly polarized optical pum** results in long lived valley polarization of inter-layer exciton. Intriguingly, the inter-layer exciton photoluminescence has helicity opposite to the excitation. Our results show that through a careful choice of the TMDs forming the van der Waals heterostructure it is possible to control the circular polarization of the inter-layer exciton emission.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
High Throughput Characterization of Epitaxially Grown Single-Layer MoS2
Authors:
Foad Ghasemi,
Riccardo Frisenda,
Dumitru Dumcenco,
Andras Kis,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate…
▽ More
The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate and have an area comprised between 10 μm2 and 60 μm2. Differential reflectance measurements performed on these crystallites show that the area of the MoS2 crystallites has an influence on the position and broadening of the B exciton while the orientation does not influence the A and B excitons of MoS2. These measurements demonstrate that differential reflectance measurements have the potential to be used to characterize the homogeneity of large area CVD grown samples.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
Defect healing and charge transfer mediated valley polarization in MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructures
Authors:
Alessandro Surrente,
Dumitru Dumcenco,
Zhuo Yang,
Agnieszka Kuc,
Yu **g,
Thomas Heine,
Yen-Cheng Kung,
Duncan K. Maude,
Andras Kis,
Paulina Plochocka
Abstract:
Monolayer transition metal dichalcogenides (TMDC) grown by chemical vapor deposition (CVD) are plagued by a significantly lower optical quality compared to exfoliated TMDC. In this work we show that the optical quality of CVD-grown MoSe$_2$ is completely recovered if the material is sandwiched in MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructures. We show by means of density-function…
▽ More
Monolayer transition metal dichalcogenides (TMDC) grown by chemical vapor deposition (CVD) are plagued by a significantly lower optical quality compared to exfoliated TMDC. In this work we show that the optical quality of CVD-grown MoSe$_2$ is completely recovered if the material is sandwiched in MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructures. We show by means of density-functional theory that this remarkable and unexpected result is due to defect healing: S atoms of the more reactive MoS$_2$ layers are donated to heal Se vacancy defects in the middle MoSe$_2$ layer. In addition, the trilayer structure exhibits a considerable charge-transfer mediated valley polarization of MoSe$_2$ without the need for resonant excitation. Our fabrication approach, relying solely on simple flake transfer technique, paves the way for the scalable production of large-area TMDC materials with excellent optical quality.
△ Less
Submitted 14 June, 2017; v1 submitted 2 March, 2017;
originally announced March 2017.
-
Dark excitons and the elusive valley polarization in transition metal dichalcogenides
Authors:
M. Baranowski,
A. Surrente,
D. K. Maude,
M Ballottin,
A. A. Mitioglu,
P. C. M. Christianen,
Y. C. Kung,
D. Dumcenco,
A. Kis,
P Plochocka
Abstract:
A rate equation model for the dark and bright excitons kinetics is proposed which explains the wide variation in the observed degree of circular polarization of the PL emission in different TMDs monolayers. Our work suggests that the dark exciton states play an important, and previously unsuspected role in determining the degree of polarization of the PL emission. A dark exciton ground state provi…
▽ More
A rate equation model for the dark and bright excitons kinetics is proposed which explains the wide variation in the observed degree of circular polarization of the PL emission in different TMDs monolayers. Our work suggests that the dark exciton states play an important, and previously unsuspected role in determining the degree of polarization of the PL emission. A dark exciton ground state provides a robust reservoir for valley polarization, which tries to maintain a Boltzmann distribution of the bright exciton states in the same valley via the intra valley bright dark exciton scattering mechanism. The dependence of the degree of circular polarization on the detuning energy of the excitation in MoSe$_2$ suggests that the electron-hole exchange interaction dominates over two LA phonon emission mechanism for inter valley scattering in TMDs.
△ Less
Submitted 17 January, 2017; v1 submitted 11 January, 2017;
originally announced January 2017.
-
Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials
Authors:
Riccardo Frisenda,
Yue Niu,
Patricia Gant,
Aday J. Molina-Mendoza,
Robert Schmidt,
Rudolf Bratschitsch,
**xin Liu,
Lei Fu,
Dumitru Dumcenco,
Andras Kis,
David Perez De Lara,
Andres Castellanos-Gomez
Abstract:
Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D…
▽ More
Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Disorder engineering and conductivity dome in ReS2 with electrolyte gating
Authors:
Dmitry Ovchinnikov,
Fernando Gargiulo,
Adrien Allain,
Diego José Pasquier,
Dumitru Dumcenco,
Ching-Hwa Ho,
Oleg V. Yazyev,
Andras Kis
Abstract:
Atomically thin rhenium disulphide (ReS2) is a member of the transition metal dichalcogenide (TMDC) family of materials characterized by weak interlayer coupling and a distorted 1T structure. Here, we report on the electrical transport study of mono- and multilayer ReS2 with polymer electrolyte gating. We find that the conductivity of monolayer ReS2 is completely suppressed at high carrier densiti…
▽ More
Atomically thin rhenium disulphide (ReS2) is a member of the transition metal dichalcogenide (TMDC) family of materials characterized by weak interlayer coupling and a distorted 1T structure. Here, we report on the electrical transport study of mono- and multilayer ReS2 with polymer electrolyte gating. We find that the conductivity of monolayer ReS2 is completely suppressed at high carrier densities, an unusual feature unique to monolayers, making ReS2 the first example of such a material. While thicker flakes of ReS2 also exhibit a conductivity dome and an insulator-metal-insulator sequence, they do not show a complete conductivity suppression at high do** densities. Using dual-gated devices, we can distinguish the gate-induced do** from the electrostatic disorder induced by the polymer electrolyte itself. Theoretical calculations and a transport model indicate that the observed conductivity suppression can be explained by a combination of a narrow conduction band and Anderson localization due to electrolyte-induced disorder.
△ Less
Submitted 31 August, 2016;
originally announced August 2016.
-
Electroabsorption in MoS$_2$
Authors:
Daniele Vella,
Dmitry Ovchinnikov,
Nicola Martino,
Victor Vega-Mayoral,
Dumitru Dumcenco,
Yen-Chen Kung,
Maria-Rosa Antognazza,
Andras Kis,
Guglielmo Lanzani,
Dragan Mihailovic,
Christoph Gadermaier
Abstract:
To translate electrical into optical signals one uses the modulation of either the refractive index or the absorbance of a material by an electric field. Contemporary electroabsorption modulators (EAMs) employ the quantum confined Stark effect (QCSE), the field-induced red-shift and broadening of the strong excitonic absorption resonances characteristic of low-dimensional semiconductor structures.…
▽ More
To translate electrical into optical signals one uses the modulation of either the refractive index or the absorbance of a material by an electric field. Contemporary electroabsorption modulators (EAMs) employ the quantum confined Stark effect (QCSE), the field-induced red-shift and broadening of the strong excitonic absorption resonances characteristic of low-dimensional semiconductor structures. Here we show an unprecedentedly strong transverse electroabsorption (EA) signal in a monolayer of the two-dimensional semiconductor MoS2. The EA spectrum is dominated by an apparent linewidth broadening of around 15% at a modulated voltage of only Vpp = 0.5 V. Contrary to the conventional QCSE, the signal increases linearly with the applied field strength and arises from a linear variation of the distance between the strongly overlap** exciton and trion resonances. The achievable modulation depths exceeding 0.1 dBnm-1 bear the scope for extremely compact, ultrafast, energy-efficient EAMs for integrated photonics, including on-chip optical communication.
△ Less
Submitted 2 July, 2016;
originally announced July 2016.
-
Magneto-excitons in large area CVD grown monolayer MoS$_{2}$ and MoSe$_{2}$ on sapphire
Authors:
A. A. Mitioglu,
K. Galkowski,
A. Surrente,
L. Klopotowski,
D. Dumcenco,
A. Kis,
D. K. Maude,
P. Plochocka
Abstract:
Magneto transmission spectroscopy was employed to study the valley Zeeman effect in large-area monolayer MoS$_{2}$ and MoSe$_{2}$. The extracted values of the valley g-factors for both A- and B-exciton were found be similar with $g_v \simeq -4.5$. The samples are expected to be strained due to the CVD growth on sapphire at high temperature ($700^\circ$C). However, the estimated strain, which is ma…
▽ More
Magneto transmission spectroscopy was employed to study the valley Zeeman effect in large-area monolayer MoS$_{2}$ and MoSe$_{2}$. The extracted values of the valley g-factors for both A- and B-exciton were found be similar with $g_v \simeq -4.5$. The samples are expected to be strained due to the CVD growth on sapphire at high temperature ($700^\circ$C). However, the estimated strain, which is maximum at low temperature, is only $\simeq 0.2\%$. Theoretical considerations suggest that the strain is too small to significantly influence the electronic properties. This is confirmed by the measured value of valley g-factor, and the measured temperature dependence of the band gap, which are almost identical for CVD and mechanically exfoliated MoS$_2$.
△ Less
Submitted 12 April, 2016; v1 submitted 3 February, 2016;
originally announced February 2016.
-
High Responsivity, Large-Area Graphene/MoS2 Flexible Photodetectors
Authors:
D. De Fazio,
I. Goykhman,
M. Bruna,
A. Eiden,
S. Milana,
D. Yoon,
U. Sassi,
M. Barbone,
D. Dumcenco,
K. Marinov,
A. Kis,
A. C. Ferrari
Abstract:
We present flexible photodetectors (PDs) for visible wavelengths fabricated by stacking centimetre-scale chemical vapour deposited (CVD) single layer graphene (SLG) and single layer CVD MoS2, both wet transferred onto a flexible polyethylene terephthalate substrate. The operation mechanism relies on injection of photoexcited electrons from MoS2 to the SLG channel. The external responsivity is 45.5…
▽ More
We present flexible photodetectors (PDs) for visible wavelengths fabricated by stacking centimetre-scale chemical vapour deposited (CVD) single layer graphene (SLG) and single layer CVD MoS2, both wet transferred onto a flexible polyethylene terephthalate substrate. The operation mechanism relies on injection of photoexcited electrons from MoS2 to the SLG channel. The external responsivity is 45.5A/W and the internal 570A/W at 642nm. This is at least two orders of magnitude higher than bulk-semiconductor flexible membranes and other flexible PDs based on graphene and layered materials. The photoconductive gain is up to 4x10^5. The photocurrent is in the 0.1-100 uA range. The devices are semi-transparent, with just 8% absorption at 642nm and work stably upon bending to a curvature of 6cm. These capabilities and the low voltage operation (<1V) make them attractive for wearable applications.
△ Less
Submitted 27 December, 2015;
originally announced December 2015.
-
Identification of single nucleotides in MoS2 nanopores
Authors:
Jiandong Feng,
Ke Liu,
Roman D. Bulushev,
Sergey Khlybov,
Dumitru Dumcenco,
Andras Kis,
Aleksandra Radenovic
Abstract:
Ultrathin membranes have drawn much attention due to their unprecedented spatial resolution for DNA nanopore sequencing. However, the high translocation velocity (3000-50000 nt/ms) of DNA molecules moving across such membranes limits their usability. To this end, we have introduced a viscosity gradient system based on room-temperature ionic liquids (RTILs) to control the dynamics of DNA translocat…
▽ More
Ultrathin membranes have drawn much attention due to their unprecedented spatial resolution for DNA nanopore sequencing. However, the high translocation velocity (3000-50000 nt/ms) of DNA molecules moving across such membranes limits their usability. To this end, we have introduced a viscosity gradient system based on room-temperature ionic liquids (RTILs) to control the dynamics of DNA translocation through a nanometer-size pore fabricated in an atomically thin MoS2 membrane. This allows us for the first time to statistically identify all four types of nucleotides with solid state nanopores. Nucleotides are identified according to the current signatures recorded during their transient residence in the narrow orifice of the atomically thin MoS2 nanopore. In this novel architecture that exploits high viscosity of RTIL, we demonstrate single-nucleotide translocation velocity that is an optimal speed (1-50 nt/ms) for DNA sequencing, while kee** the signal to noise ratio (SNR) higher than 10. Our findings pave the way for future low-cost and rapid DNA sequencing using solid-state nanopores.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Electrochemical reaction in single layer MoS2: nanopores opened atom by atom
Authors:
J. Feng,
K. Liu,
M. Graf,
M. Lihter,
R. D. Bulushev,
D. Dumcenco,
D. T. L. Alexander,
D. Krasnozhon,
T. Vuletic,
A. Kis,
A. Radenovic
Abstract:
Ultrathin nanopore membranes based on 2D materials have demonstrated ultimate resolution toward DNA sequencing. Among them, molybdenum disulphide (MoS2) shows long-term stability as well as superior sensitivity enabling high throughput performance. The traditional method of fabricating nanopores with nanometer precision is based on the use of focused electron beams in transmission electron microsc…
▽ More
Ultrathin nanopore membranes based on 2D materials have demonstrated ultimate resolution toward DNA sequencing. Among them, molybdenum disulphide (MoS2) shows long-term stability as well as superior sensitivity enabling high throughput performance. The traditional method of fabricating nanopores with nanometer precision is based on the use of focused electron beams in transmission electron microscope (TEM). This nanopore fabrication process is time-consuming, expensive, not scalable and hard to control below 1 nm. Here, we exploited the electrochemical activity of MoS2 and developed a convenient and scalable method to controllably make nanopores in single-layer MoS2 with sub-nanometer precision using electrochemical reaction (ECR). The electrochemical reaction on the surface of single-layer MoS2 is initiated at the location of defects or single atom vacancy, followed by the successive removals of individual atoms or unit cells from single-layer MoS2 lattice and finally formation of a nanopore. Step-like features in the ionic current through the growing nanopore provide direct feedback on the nanopore size inferred from a widely used conductance vs. pore size model. Furthermore, DNA translocations can be detected in-situ when as-fabricated MoS2 nanopores are used. The atomic resolution and accessibility of this approach paves the way for mass production of nanopores in 2D membranes for potential solid-state nanopore sequencing.
△ Less
Submitted 20 April, 2015;
originally announced April 2015.
-
Avalanche photodiodes based on MoS2/Si heterojunctions
Authors:
Oriol Lopez-Sanchez,
Dumitru Dumcenco,
Edoardo Charbon,
Andras Kis
Abstract:
Avalanche photodiodes (APDs) are the semiconducting analogue of photomultiplier tubes offering very high internal current gain and fast response. APDs are interesting for a wide range of applications in communications1, laser ranging2, biological imaging3, and medical imaging4 where they offer speed and sensitivity superior to those of classical p-n junction-based photodetectors. The APD principle…
▽ More
Avalanche photodiodes (APDs) are the semiconducting analogue of photomultiplier tubes offering very high internal current gain and fast response. APDs are interesting for a wide range of applications in communications1, laser ranging2, biological imaging3, and medical imaging4 where they offer speed and sensitivity superior to those of classical p-n junction-based photodetectors. The APD principle of operation is based on photocurrent multiplication through impact ionization in reverse-biased p-n junctions. APDs can either operate in proportional mode, where the bias voltage is below breakdown, or in Geiger mode, where the bias voltage is above breakdown. In proportional mode, the multiplication gain is finite, thus allowing for photon energy discrimination, while in Geiger mode of operation the multiplication gain is virtually infinite and a self-sustaining avalanche may be triggered, thus allowing detection of single photons5. Here, we demonstrate APDs based on vertically stacked monolayer MoS2 and p-Si, forming an abrupt p-n heterojunction. With this device, we demonstrate carrier multiplication exceeding 1000. Even though such multiplication factors in APDs are commonly accompanied by high noise, our devices show extremely low noise levels comparable with those in regular photodiodes. These heterostructures allow the realization of simple and inexpensive high-performance and low-noise photon counters based on transition metal dichalcogenides.
△ Less
Submitted 12 November, 2014;
originally announced November 2014.
-
Electrical Transport Properties of Single-Layer WS2
Authors:
Dmitry Ovchinnikov,
Adrien Allain,
Ying-Sheng Huang,
Dumitru Dumcenco,
Andras Kis
Abstract:
We report on the fabrication of field-effect transistors based on single and bilayers of the semiconductor WS2 and the investigation of their electronic transport properties. We find that the do** level strongly depends on the device environment and that long in-situ annealing drastically improves the contact transparency allowing four-terminal measurements to be performed and the pristine prope…
▽ More
We report on the fabrication of field-effect transistors based on single and bilayers of the semiconductor WS2 and the investigation of their electronic transport properties. We find that the do** level strongly depends on the device environment and that long in-situ annealing drastically improves the contact transparency allowing four-terminal measurements to be performed and the pristine properties of the material to be recovered. Our devices show n-type behavior with high room-temperature on/off current ratio of ~106. They show clear metallic behavior at high charge carrier densities and mobilities as high as ~140 cm2/Vs at low temperatures (above 300 cm2/Vs in the case of bi-layers). In the insulating regime, the devices exhibit variable-range hop**, with a localization length of about 2 nm that starts to increase as the Fermi level enters the conduction band. The promising electronic properties of WS2, comparable to those of single-layer MoS2 and WSe2, together with its strong spin-orbit coupling, make it interesting for future applications in electronic, optical and valleytronic devices.
△ Less
Submitted 21 August, 2014;
originally announced August 2014.
-
Large-area Epitaxial Monolayer MoS2
Authors:
Dumitru Dumcenco,
Dmitry Ovchinnikov,
Kolyo Marinov,
Oriol Lopez-Sanchez,
Daria Krasnozhon,
Ming-Wei Chen,
Philippe Gillet,
Anna Fontcuberta i Morral,
Aleksandra Radenovic,
Andras Kis
Abstract:
Two-dimensional semiconductors such as MoS2 are an emerging material family with wide-ranging potential applications in electronics, optoelectronics and energy harvesting. Large-area growth methods are needed to open the way to the applications. While significant progress to this goal was made, control over lattice orientation during growth still remains a challenge. This is needed in order to min…
▽ More
Two-dimensional semiconductors such as MoS2 are an emerging material family with wide-ranging potential applications in electronics, optoelectronics and energy harvesting. Large-area growth methods are needed to open the way to the applications. While significant progress to this goal was made, control over lattice orientation during growth still remains a challenge. This is needed in order to minimize or even avoid the formation of grain boundaries which can be detrimental to electrical, optical and mechanical properties of MoS2 and other 2D semiconductors. Here, we report on the uniform growth of high-quality centimeter-scale continuous monolayer MoS2 with control over lattice orientation. Using transmission electron microscopy we show that the monolayer film is composed of coalescing single islands that share a predominant lattice orientation due to an epitaxial growth mechanism. Raman and photoluminescence spectra confirm the high quality of the grown material. Optical absorbance spectra acquired over large areas show new features in the high-energy part of the spectrum, indicating that MoS2 could also be interesting for harvesting this region of the solar spectrum and fabrication of UV-sensitive photodetectors. Even though the interaction between the growth substrate and MoS2 is strong enough to induce lattice alignment, we can easily transfer the grown material and fabricate field-effect transistors on SiO2 substrates showing mobility superior to the exfoliated material.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Properties of Individual Dopant Atoms in Single-Layer MoS2: Atomic Structure, Migration, and Enhanced Reactivity
Authors:
Yung-Chang Lin,
Dumitru O. Dumcenco,
Hannu-Pekka Komsa,
Yoshiko Niimi,
Arkady V. Krasheninnikov,
Ying-Sheng Huang,
Kazu Suenaga
Abstract:
The differences in the behavior of Re (n-type) and Au (p-type) dopant atoms in single-layered MoS2 were investigated by in situ scanning transmission electron microscopy. Re atoms tend to occupy Mo sites, while Au atoms exist as adatoms and show larger mobility under the electron beam. Re substituted to Mo site showed enhanced chemical affinity, evidenced by agglomeration of Re adatoms around thes…
▽ More
The differences in the behavior of Re (n-type) and Au (p-type) dopant atoms in single-layered MoS2 were investigated by in situ scanning transmission electron microscopy. Re atoms tend to occupy Mo sites, while Au atoms exist as adatoms and show larger mobility under the electron beam. Re substituted to Mo site showed enhanced chemical affinity, evidenced by agglomeration of Re adatoms around these sites. This may explain the difficulties in achieving a high compositional rate of homogeneous Re do** in MoS2. In addition, an in situ coverage experiment together with density functional theory calculations discovered a high surface reactivity and agglomeration of other impurity atoms such as carbon at the Re doped sites.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.
-
Atomic mechanism of phase transition between metallic and semiconducting MoS2 single-layers
Authors:
Yung-Chang Lin,
Dumitru O. Dumcenco,
Ying-Sheng Huang,
Kazu Suenaga
Abstract:
Structural transformation between metallic (1T) and semiconducting (2H) phases of single-layered MoS2 was systematically investigated by an in situ STEM with atomic precision. The 1T/2H phase transition is comprised of S and/or Mo atomic-plane glides, and requires an intermediate phase (α-phase) as an indispensable precursor. Migration of two kinds of boundaries (β and γ-boundaries) is also found…
▽ More
Structural transformation between metallic (1T) and semiconducting (2H) phases of single-layered MoS2 was systematically investigated by an in situ STEM with atomic precision. The 1T/2H phase transition is comprised of S and/or Mo atomic-plane glides, and requires an intermediate phase (α-phase) as an indispensable precursor. Migration of two kinds of boundaries (β and γ-boundaries) is also found to be responsible for the growth of the second phase. The 1T phase can be intentionally introduced in the 2H matrix by using a high dose of incident electron beam during heating the MoS2 single-layers up to 400~700°C in high vacuum and indeed controllable in size. This work may lead to the possible fabrication of composite nano-devices made of local domains with distinct electronic properties.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.
