Showing 1–46 of 46 results for author: Dumbovic

The catalog of Hvar Observatory solar observations

Authors: Mateja Dumbovic, Luci Karbonini, Jasa Calogovic, Filip Matkovic, Karmen Martinic, Akshay Kumar Remeshan, Roman Brajsa, Bojan Vrsnak

Abstract: We compile the catalog of Hvar Observatory solar observations in the time period corresponding to regular digitally stored chromospheric and photospheric observations 2010-2019. We make basic characterisation of observed phenomena and compare them to catalogs which are based on full disc solar images. We compile a catalog of observed ARs consisting of 1100 entries, where each AR is classified acco… ▽ More We compile the catalog of Hvar Observatory solar observations in the time period corresponding to regular digitally stored chromospheric and photospheric observations 2010-2019. We make basic characterisation of observed phenomena and compare them to catalogs which are based on full disc solar images. We compile a catalog of observed ARs consisting of 1100 entries, where each AR is classified according to McIntosh and Mt Wilson classifications. We find that HVAR observations are biased towards more frequently observing more complex ARs and observing them in longer time periods, likely related to the small FOV not encompassing the whole solar disc. In H$α$ observations we catalog conspicuous filaments/prominences and flares. We characterise filaments according to their location, chirality (if possible) and eruptive signatures. Analysis of the eruptive filaments reveals a slight bias in HVAR catalog towards observation of partial eruptions, possibly related to the observers tendency to observe filament which already showed some activity. In the flare catalog we focus on their observed eruptive signatures (loops or ribbons) and their shape. In addition, we associate them to GOES soft X-ray flares to determine their corresponding class. We find that HVAR observations seem biased towards more frequently observing stronger flares and observing them in longer time periods. We demonstrate the feasibility of the catalog on a case study of the flare detected on 2 August 2011 in HVAR H$α$ observations and related Sun-to-Earth phenomena. Through flare-CME-ICME association we demonstrate the agreement of remote and in situ properties. The data used for this study, as well as the catalog, are made publicly available. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: Solar Physics, 24 pages, 14 figures

Unveiling the Journey of a Highly Inclined CME: Insights from the March 13, 2012 Event with 110$^\circ$ Longitudinal Separation

Authors: F. Carcaboso, M. Dumbovic, C. Kay, D. Lario, L. K. Jian, L. B. Wilson III, R. Gómez-Herrero, M. Temmer, S. G. Heinemann, T. Nieves-Chinchilla, A. M. Veronig

Abstract: A fast and wide Coronal Mass Ejection (CME) erupted from the Sun on 2012-03-13. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft. We suggest that at 1 au the CME extended at least 110$^\circ$ in longitude, with Earth crossing its east flank and STEREO-A crossing its west flank. Despite their separation, measurements from both positions showed… ▽ More A fast and wide Coronal Mass Ejection (CME) erupted from the Sun on 2012-03-13. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft. We suggest that at 1 au the CME extended at least 110$^\circ$ in longitude, with Earth crossing its east flank and STEREO-A crossing its west flank. Despite their separation, measurements from both positions showed very similar in situ CME signatures. The solar source region where the CME erupted was surrounded by three coronal holes (CHs). Their locations with respect to the CME launch site were east (negative polarity), southwest (positive polarity) and west (positive polarity). The solar magnetic field polarity of the area covered by each CH matches that observed at 1 au in situ. Suprathermal electrons at each location showed mixed signatures with only some intervals presenting clear counterstreaming flows as the CME transits both locations. The strahl population coming from the shortest magnetic connection of the structure to the Sun showed more intensity. The study presents important findings regarding the in situ measured CME on 2012-03-15, detected at a longitudinal separation of 110$^\circ$ in the ecliptic plane despite its initial inclination being around 45$^\circ$ when erupted. This suggests that the CME may have deformed and/or rotated, allowing it to be observed near its legs with spacecraft at a separation angle greater than 100$^\circ$. The CME structure interacted with high-speed streams generated by the surrounding CHs. The piled-up plasma in the sheath region exhibited an unexpected correlation in magnetic field strength despite the large separation in longitude. In situ observations reveal that at both locations there was a flank encounter, where the spacecraft crossed the first part of the CME, then encountered ambient solar wind, and finally passed near the legs of the structure. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: Accepted in A&A. Previous to final editorial changes

A new method of measuring Forbush decreases

Authors: M. Dumbovic, L. Kramaric, I. Benko, B. Heber, B. Vrsnak

Abstract: Forbush decreases (FDs) are short-term depressions in the galactic cosmic ray flux and one of the common signatures of coronal mass ejections (CMEs) in the heliosphere. They often show a two-step profile, the second one associated with the CMEs magnetic structure (flux rope, FR), which can be described by the recently developed model ForbMod. The aim of this study is to utilise ForbMod to develop… ▽ More Forbush decreases (FDs) are short-term depressions in the galactic cosmic ray flux and one of the common signatures of coronal mass ejections (CMEs) in the heliosphere. They often show a two-step profile, the second one associated with the CMEs magnetic structure (flux rope, FR), which can be described by the recently developed model ForbMod. The aim of this study is to utilise ForbMod to develop a best-fit procedure to be applied on FR-related FDs as a convenient measurement tool. We develop a best-fit procedure that can be applied to a data series from an arbitrary detector. Thus, the basic procedure facilitates measurement estimation of the magnitude of the FR-related FD, with the possibility of being adapted for the energy response of a specific detector for a more advanced analysis. The non-linear fitting was performed by calculating all possible ForbMod curves constrained within the FR borders to the designated dataset and minimising the mean square error (MSE). In order to evaluate the performance of the ForbMod best-fit procedure, we used synthetic measurements produced by calculating the theoretical ForbMod curve for a specific example CME and then applying various effects to the data to mimic the imperfection of the real measurements. We also tested the ForbMod best-fit function on the real data, measured by detector F of the SOHO-EPHIN instrument on a sample containing 30 events, all of which have a distinct FD corresponding to the CMEs magnetic structure. Overall, we find that the ForbMod best-fit procedure performs similar to the traditional algorithm-based observational method, but with slightly smaller values for the FD amplitude, as it is taking into account the noise in the data. Furthermore, we find that the best-fit procedure has an advantage compared to the traditional method as it can estimate the FD amplitude even when there is a data gap at the onset of the FD. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: 14 pages, 10 figures, A&A

Effects of coronal mass ejection orientation on its propagation in the heliosphere

Authors: K. Martinic, M. Dumbovic, J. Calogovic, B. Vrsnak, N. Al-Haddad, M. Temmer

Abstract: Context. In the scope of space weather forecasting, it is crucial to be able to more reliably predict the arrival time, speed, and magnetic field configuration of coronal mass ejections (CMEs). From the time a CME is launched, the dominant factor influencing all of the above is the interaction of the interplanetary CME (ICME) with the ambient plasma and interplanetary magnetic field. Aims. Due to… ▽ More Context. In the scope of space weather forecasting, it is crucial to be able to more reliably predict the arrival time, speed, and magnetic field configuration of coronal mass ejections (CMEs). From the time a CME is launched, the dominant factor influencing all of the above is the interaction of the interplanetary CME (ICME) with the ambient plasma and interplanetary magnetic field. Aims. Due to a generally anisotropic heliosphere, differently oriented ICMEs may interact differently with the ambient plasma and interplanetary magnetic field, even when the initial eruption conditions are similar. For this, we examined the possible link between the orientation of an ICME and its propagation in the heliosphere (up to 1 AU). Methods. We investigated 31 CME-ICME associations in the period from 1997 to 2018. The CME orientation in the near-Sun environment was determined using an ellipse-fitting technique applied to single-spacecraft data from SOHO/LASCO C2 and C3 coronagraphs. In the near-Earth environment, we obtained the orientation of the corresponding ICME using in situ plasma and magnetic field data. The shock orientation and nonradial flows in the sheath region for differently oriented ICMEs were investigated. In addition, we calculated the ICME transit time to Earth and drag parameter to probe the overall drag force for differently oriented ICMEs. The drag parameter was calculated using the reverse modeling procedure with the drag-based model. Results. We found a significant difference in nonradial flows for differently oriented ICMEs, whereas a significant difference in drag for differently oriented ICMEs was not found. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 11 pages, 4 figures

Particle Radiation Environment in the Heliosphere: Status, limitations and recommendations

Authors: **gnan Guo, Bingbing Wang, Kathryn Whitman, Christina Plainaki, Lingling Zhao, Hazel M. Bain, Christina Cohen, Silvia Dalla, Mateja Dumbovic, Miho Janvier, Insoo Jun, Janet Luhmann, Olga E. Malandraki, M. Leila Mays, Jamie S. Rankin, Linghua Wang, Yihua Zheng

Abstract: Space weather is a multidisciplinary research area connecting scientists from across heliophysics domains seeking a coherent understanding of our space environment that can also serve modern life and society's needs. COSPAR's ISWAT (International Space Weather Action Teams) 'clusters' focus attention on different areas of space weather study while ensuring the coupled system is broadly addressed v… ▽ More Space weather is a multidisciplinary research area connecting scientists from across heliophysics domains seeking a coherent understanding of our space environment that can also serve modern life and society's needs. COSPAR's ISWAT (International Space Weather Action Teams) 'clusters' focus attention on different areas of space weather study while ensuring the coupled system is broadly addressed via regular communications and interactions. The ISWAT cluster "H3: Radiation Environment in the Heliosphere" (https://www.iswat-cospar.org/h3) has been working to provide a scientific platform to understand, characterize and predict the energetic particle radiation in the heliosphere with the practical goal of mitigating radiation risks associated with areospace activities, satellite industry and human space explorations. In particular, present approaches help us understand the physical phenomena at large, optimizing the output of multi-viewpoint observations and pushing current models to their limits. In this paper, we review the scientific aspects of the radiation environment in the heliosphere covering four different radiation types: Solar Energetic Particles (SEPs), Ground Level Enhancement (GLE, a type of SEP events with energies high enough to trigger the enhancement of ground-level detectors), Galactic Cosmic Rays (GCRs) and Anomalous Cosmic Rays (ACRs). We focus on related advances in the research community in the past 10-20 years and what we still lack in terms of understanding and predictive capabilities. Finally we also consider some recommendations related to the improvement of both observational and modeling capabilities in the field of space radiation environment. △ Less

Submitted 23 August, 2023; originally announced August 2023.

On the three-dimensional relation between the coronal dimming, erupting filament and CME. Case study of the 28 October 2021 X1.0 event

Authors: Galina Chikunova, Tatiana Podladchikova, Karin Dissauer, Astrid M. Veronig, Mateja Dumbović, Manuela Temmer, Ewan C. M. Dickson

Abstract: We investigate the relation between the spatiotemporal evolution of the dimming region and the dominant direction of the filament eruption and CME propagation for the 28 October 2021 X1.0 flare/CME event observed from multiple viewpoints by Solar Orbiter, STEREO-A, SDO, and SOHO. We propose a method to estimate the dominant dimming direction by tracking its area evolution and emphasize its accurat… ▽ More We investigate the relation between the spatiotemporal evolution of the dimming region and the dominant direction of the filament eruption and CME propagation for the 28 October 2021 X1.0 flare/CME event observed from multiple viewpoints by Solar Orbiter, STEREO-A, SDO, and SOHO. We propose a method to estimate the dominant dimming direction by tracking its area evolution and emphasize its accurate estimation by calculating the surface area of a sphere for each pixel. To determine the early flux rope propagation direction, we perform 3D reconstruction of the CME via graduated cylindrical shell modeling (GCS) and tie-pointing of the filament. The dimming initially expands radially and later shifts southeast. The orthogonal projections of the reconstructed height evolution of the erupting filament onto the solar surface are located in the sector of the dominant dimming growth, while the orthogonal projections of the inner part of GCS reconstruction align with the total dimming area. The filament reaches a maximum speed of $\approx$250 km/s at a height of about $\approx$180 Mm. The direction of its motion is strongly inclined from the radial (64$^\circ$ to the East, 32$^\circ$ to the South). The 50$^\circ$ difference in the 3D direction between the CME and the filament leg closely corresponds to the CME half-width determined from reconstruction, suggesting a potential relation of the reconstructed filament to the associated leg of the CME body. Our findings highlight that the dominant propagation of the dimming growth reflects the direction of the erupting magnetic structure (filament) low in the solar atmosphere, though the filament evolution is not related directly to the direction of the global CME expansion. The overall dimming morphology closely resembles the inner part of the CME reconstruction, validating the use of dimming observations to obtain insight into the CME direction. △ Less

Submitted 18 August, 2023; originally announced August 2023.

Comments: 15 pages, 18 figures, accepted to Astronomy & Astrophysics

Journal ref: A&A 678, A166 (2023)

Using Solar Orbiter as an upstream solar wind monitor for real time space weather predictions

Authors: R. Laker, T. S. Horbury, H. O'Brien, E. J. Fauchon-Jones, V. Angelini, N. Fargette, T. Amerstorfer, M. Bauer, C. Möstl, E. E. Davies, J. A. Davies, R. Harrison, D. Barnes, M. Dumbović

Abstract: Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity t… ▽ More Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity to use Solar Orbiter, at 0.5\,AU upstream of Earth, as an upstream solar wind monitor. We were able to use real time science quality magnetic field measurements, taken only 12 minutes earlier, to predict the arrival time of a CME prior to reaching Earth. We used measurements at Solar Orbiter to constrain an ensemble of simulation runs from the ELEvoHI model, reducing the uncertainty in arrival time from 10.4\,hours to 2.5\,hours. There was also an excellent agreement in the $B_z$ profile between Solar Orbiter and Wind spacecraft, despite being separated by 0.5\,AU and 10$^{\circ}$ longitude. Therefore, we show that it is possible to predict not only the arrival time of a CME, but the sub-structure of the magnetic field within it, over a day in advance. The opportunity to use Solar Orbiter as an upstream solar wind monitor will repeat once a year, which should further help assess the efficacy upstream in-situ measurements in real time space weather forecasting. △ Less

Submitted 25 February, 2024; v1 submitted 3 July, 2023; originally announced July 2023.

Journal ref: Space Weather, 22, e2023SW003628 (2024)

Quantifying errors in 3D CME parameters derived from synthetic data using white-light reconstruction techniques

Authors: Christine Verbeke, M. Leila Mays, Christina Kay, Pete Riley, Erika Palmerio, Mateja Dumbović, Marilena Mierla, Camilla Scolini, Manuela Temmer, Evangelos Paouris, Laura A. Balmaceda, Hebe Cremades, Jürgen Hinterreiter

Abstract: (Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields a… ▽ More (Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques. We explore how subjectivity affects the 3D CME parameters that are obtained from the GCS reconstruction technique. We have designed two different synthetic scenarios where the ``true'' geometric parameters are known in order to quantify such uncertainties for the first time. We explore this as follows: 1) Using the ray-tracing option from the GCS model software, and 2) Using 3D MHD simulation data from the MAS code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges for both synthetic GCS and simulated MHD white-light data. Increasing the number of viewpoints to two, the errors decreased by about 4$^\circ$ in latitude, 22$^\circ$ in longitude, 14$^\circ$ in tilt, and 10$^\circ$ in half-angle, pointing towards a need for at least two viewpoints. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: $Δθ$ (latitude)=${6^\circ}$, $Δφ$ (longitude)=${11^\circ}$, $Δγ$ (tilt)=${25^\circ}$, $Δα$ (half-angle)=${10^\circ}$, $Δh$ (height)=$0.6 R_{\odot}$, and $Δκ$ (ratio)=$0.1$. △ Less

Submitted 2 February, 2023; v1 submitted 1 February, 2023; originally announced February 2023.

Tracking magnetic flux and helicity from Sun to Earth -- Multi-spacecraft analysis of a magnetic cloud and its solar source

Authors: J. K. Thalmann, M. Dumbovic, K. Dissauer, T. Podladchikova, G. Chikunova, M. Temmer, E. Dickson, A. M. Veronig

Abstract: We analyze the complete chain of effects caused by a solar eruptive event in order to better understand the dynamic evolution of magnetic-field related quantities in interplanetary space, in particular that of magnetic flux and helicity. We study a series of connected events (a confined C4.5 flare, a flare-less filament eruption and a double-peak M-class flare) that originated in NOAA active regio… ▽ More We analyze the complete chain of effects caused by a solar eruptive event in order to better understand the dynamic evolution of magnetic-field related quantities in interplanetary space, in particular that of magnetic flux and helicity. We study a series of connected events (a confined C4.5 flare, a flare-less filament eruption and a double-peak M-class flare) that originated in NOAA active region (AR) 12891 on 2021 November 1 and November 2. We deduce the magnetic structure of AR 12891 using stereoscopy and nonlinear force-free (NLFF) magnetic field modeling, allowing us to identify a coronal flux rope and to estimate its axial flux and helicity. Additionally, we compute reconnection fluxes based on flare ribbon and coronal dimming signatures from remote sensing imagery. Comparison to corresponding quantities of the associated magnetic cloud (MC), deduced from in-situ measurements from Solar Orbiter and near-Earth spacecraft, allows us to draw conclusions on the evolution of the associated interplanetary coronal mass ejection (ICME). The latter are aided through the application of geometric fitting techniques (graduated cylindrical shell modeling; GCS) and interplanetary propagation models (drag based ensemble modeling; DBEM) to the ICME. NLFF modeling suggests the host AR's magnetic structure in the form of a left-handed (negative-helicity) sheared arcade/flux rope reaching to altitudes of 8-10 Mm above photospheric levels, in close agreement with the corresponding stereoscopic estimate. Revealed from GCS and DBEM modeling, the ejected flux rope propagated in a self-similar expanding manner through interplanetary space. Comparison of magnetic fluxes and helicities processed by magnetic reconnection in the solar source region and the respective budgets of the MC indicate a considerable contribution from the eruptive process, though the pre-eruptive budgets appear of relevance too. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Comments: 14 pages, 9 Figures, 3 Tables, 1 Movie; accepted for publication in A&A

Journal ref: A&A 669, A72 (2023)

Maximal growth rate of the ascending phase of a sunspot cycle for predicting its amplitude

Authors: Tatiana Podladchikova, Shantanu Jain, Astrid M. Veronig, Olga Sutyrina, Mateja Dumbovic, Frederic Clette, Werner Poetzi

Abstract: Forecasting the solar cycle amplitude is important for a better understanding of the solar dynamo as well as for many space weather applications. We demonstrated a steady relationship between the maximal growth rate of sunspot activity in the ascending phase of a cycle and the subsequent cycle amplitude on the basis of four data sets of solar activity indices: total sunspot numbers, hemispheric su… ▽ More Forecasting the solar cycle amplitude is important for a better understanding of the solar dynamo as well as for many space weather applications. We demonstrated a steady relationship between the maximal growth rate of sunspot activity in the ascending phase of a cycle and the subsequent cycle amplitude on the basis of four data sets of solar activity indices: total sunspot numbers, hemispheric sunspot numbers from the new catalogue from 1874 onwards, total sunspot areas, and hemispheric sunspot areas. For all the data sets, a linear regression based on the maximal growth rate precursor shows a significant correlation. Validation of predictions for cycles 1-24 shows high correlations between the true and predicted cycle amplitudes reaching r = 0.93 for the total sunspot numbers. The lead time of the predictions varies from 2 to 49 months, with a mean value of 21 months. Furthermore, we demonstrated that the sum of maximal growth rate indicators determined separately for the north and the south hemispheric sunspot numbers provides more accurate predictions than that using total sunspot numbers. The advantages reach 27% and 11% on average in terms of rms and correlation coefficient, respectively. The superior performance is also confirmed with hemispheric sunspot areas with respect to total sunspot areas. The maximal growth rate of sunspot activity in the ascending phase of a solar cycle serves as a reliable precursor of the subsequent cycle amplitude. Furthermore, our findings provide a strong foundation for supporting regular monitoring, recording, and predictions of solar activity with hemispheric sunspot data, which capture the asymmetric behaviour of the solar activity and solar magnetic field and enhance solar cycle prediction methods. △ Less

Submitted 25 June, 2022; originally announced June 2022.

Comments: 11 pages, 11 figures, accepted for publication in the Astronomy & Astrophysics

MSC Class: 85-08

Journal ref: A&A 663, A88 (2022)

Determination of CME orientation and consequences for their propagation

Authors: Karmen Martinic, Mateja Dumbovic, Manula Temmer, Astrid Veronig, Bojan Vršnak

Abstract: The configuration of the interplanetary magnetic field and features of the related ambient solar wind in the ecliptic and meridional plane are different. Therefore, one can expect that the orientation of the flux-rope axis of a coronal mass ejection (CME) influences the propagation of the CME itself. However, the determination of the CME orientation, especially from image data, remains a challengi… ▽ More The configuration of the interplanetary magnetic field and features of the related ambient solar wind in the ecliptic and meridional plane are different. Therefore, one can expect that the orientation of the flux-rope axis of a coronal mass ejection (CME) influences the propagation of the CME itself. However, the determination of the CME orientation, especially from image data, remains a challenging task to perform. This study aims to provide a reference to different CME orientation determination methods in the near-Sun environment. Also, it aims to investigate the non-radial flow in the sheath region of the interplanetary CME (ICME) in order to provide the first proxy to relate the ICME orientation with its propagation. We investigated 22 isolated CME-ICME events in the period 2008-2015. We determined the CME orientation in the near-Sun environment using the following: 1) a 3D reconstruction of the CME with the graduated cylindrical shell (GCS) model applied to coronagraphic images provided by the STEREO and SOHO missions and; 2) an ellipse fitting applied to single spacecraft data from SOHO/LASCO C2 and C3 coronagraphs. In the near-Earth environment, we obtained the orientation of the corresponding ICME using in situ plasma and field data and also investigated the non-radial flow (NRF) in its sheath region. The ability of GCS and ellipse fitting to determine the CME orientation is found to be limited to reliably distinguish only between the high or low inclination of the events. Most of the CME-ICME pairs under investigation were found to be characterized by a low inclination. For the majority of CME-ICME pairs, we obtain consistent estimations of the tilt from remote and in situ data. The observed NRFs in the sheath region show a greater y direction to z direction flow ratio for high-inclination events, indicating that the CME orientation could have an impact on the CME propagation. △ Less

Submitted 21 April, 2022; originally announced April 2022.

Journal ref: A&A 679, A97 (2023)

Evidence of a complex structure within the 2013 August 19 coronal mass ejection. Radial and longitudinal evolution in the inner heliosphere

Authors: L. Rodríguez-García, T. Nieves-Chinchilla, R. Gómez-Herrero, I. Zouganelis, A. Vourlidas, L. Balmaceda, M. Dumbovic, L. K. Jian, L. Mays, F. Carcaboso, L. F. G. dos Santos, J. Rodríguez-Pacheco

Abstract: Context: Late on 2013 August 19, a coronal mass ejection (CME) erupted from an active region located near the far-side central meridian from Earth's perspective. The event and its accompanying shock were remotely observed by the STEREO-A, STEREO-B and SOHO spacecraft. The interplanetary counterpart (ICME) was intercepted by MESSENGER near 0.3 au, and by both STEREO-A and STEREO-B, near 1 au, which… ▽ More Context: Late on 2013 August 19, a coronal mass ejection (CME) erupted from an active region located near the far-side central meridian from Earth's perspective. The event and its accompanying shock were remotely observed by the STEREO-A, STEREO-B and SOHO spacecraft. The interplanetary counterpart (ICME) was intercepted by MESSENGER near 0.3 au, and by both STEREO-A and STEREO-B, near 1 au, which were separated by 78° in heliolongitude. The main objective of this study is to follow the radial and longitudinal evolution of the ICME throughout the inner heliosphere, and to examine possible scenarios for the different magnetic flux-rope configuration observed on the solar disk, and measured in situ at the locations of MESSENGER and STEREO-A, separated by 15° in heliolongitude, and at STEREO-B, which detected the ICME flank. Results: We find that the magnetic flux-rope structure detected at STEREO-B belongs to the same ICME detected at MESSENGER and STEREO-A. The opposite helicity deduced at STEREO-B, might be due to the spacecraft intercepting one of the legs of the structure far from the flux-rope axis, while STEREO-A and MESSENGER are crossing through the core of the magnetic flux rope. The different flux-rope orientations measured at MESSENGER and STEREO-A arise probably because the two spacecraft measure a curved, highly distorted and rather complex magnetic flux-rope topology. The ICME may have suffered additional distortion in its evolution in the inner heliosphere, such as the west flank is propagating faster than the east flank when arriving 1 au. Conclusions: This work illustrates how the ambient conditions can significantly affect the expansion and propagation of the CME/ICME, introducing additional irregularities to the already asymmetric eruption, and how these complex structures cannot be directly reconstructed with the current models available. △ Less

Submitted 5 March, 2022; originally announced March 2022.

Comments: 19 pages, 10 figures

Journal ref: A&A 662, A45 (2022)

Generic profile of a long-lived corotating interaction region and associated recurrent Forbush decrease

Authors: Mateja Dumbovic, Bojan Vrsnak, Manuela Temmer, Bernd Heber, Patrick Kuhl

Abstract: We observe and analyse a long-lived corotating interaction region (CIR), originating from a single coronal hole (CH), recurring in 27 consecutive Carrington rotations 2057-2083 in the time period from June 2007 - May 2009. We studied the in situ measurements of this long-lived CIR as well as the corresponding depression in the cosmic ray (CR) count observed by SOHO/EPHIN throughout different rotat… ▽ More We observe and analyse a long-lived corotating interaction region (CIR), originating from a single coronal hole (CH), recurring in 27 consecutive Carrington rotations 2057-2083 in the time period from June 2007 - May 2009. We studied the in situ measurements of this long-lived CIR as well as the corresponding depression in the cosmic ray (CR) count observed by SOHO/EPHIN throughout different rotations. We performed a statistical analysis, as well as the superposed epoch analysis, using relative values of the key parameters: the total magnetic field strength, B, the magnetic field fluctuations, dBrms, plasma flow speed, v, plasma density, n, plasma temperature, T , and the SOHO/EPHIN F-detector particle count, and CR count. We find that the mirrored CR count-time profile is correlated with that of the flow speed, ranging from moderate to strong correlation, depending on the rotation. In addition, we find that the CR count dip amplitude is correlated to the peak in the magnetic field and flow speed of the CIR. These results are in agreement with previous statistical studies. Finally, using the superposed epoch analysis, we obtain a generic CIR example, which reflects the in situ properties of a typical CIR well. Our results are better explained based on the combined convection-diffusion approach of the CIR-related GCR modulation. Furthermore, qualitatively, our results do not differ from those based on different CHs samples. This indicates that the change of the physical properties of the recurring CIR from one rotation to another is not qualitatively different from the change of the physical properties of CIRs originating from different CHs. Finally, the obtained generic CIR example, analyzed on the basis of superposed epoch analysis, can be used as a reference for testing future models. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 13 pages, A&A in press

Journal ref: A&A 658, A187 (2022)

Analytic modeling of recurrent Forbush decreases caused by corotating interaction regions

Authors: Bojan Vrsnak, Mateja Dumbovic, Bernd Heber, Anamarija Kirin

Abstract: On scales of days, the galactic cosmic ray (GCR) flux is affected by coronal mass ejections and corotating interaction regions (CIRs), causing so-called Forbush decreases and recurrent Forbush decreases (RFDs), respectively. We explain the properties and behavior of RFDs recorded at about 1 au that are caused by CIRs generated by solar wind high-speed streams (HSSs) that emanate from coronal holes… ▽ More On scales of days, the galactic cosmic ray (GCR) flux is affected by coronal mass ejections and corotating interaction regions (CIRs), causing so-called Forbush decreases and recurrent Forbush decreases (RFDs), respectively. We explain the properties and behavior of RFDs recorded at about 1 au that are caused by CIRs generated by solar wind high-speed streams (HSSs) that emanate from coronal holes. We employed a convection-diffusion GCR propagation model based on the Fokker-Planck equation and applied it to solar wind and interplanetary magnetic field properties at 1 au. Our analysis shows that the only two effects that are relevant for a plausible overall explanation of the observations are the enhanced convection effect caused by the increased velocity of the HSS and the reduced diffusion effect caused by the enhanced magnetic field and its fluctuations within the CIR and HSS structure. These two effects that we considered in the model are sufficient to explain not only the main signatures of RFDs, but also the sometimes observed "over-recovery" and secondary dips in RFD profiles. The explanation in terms of the convection-diffusion GCR propagation hypothesis is tested by applying our model to the observations of a long-lived CIR that recurred over 27 rotations in 2007-2008. Our analysis demonstrates a very good match of the model results and observations. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 15 pages, 9 figures

The unusual widespread solar energetic particle event on 2013 August 19. Solar origin and particle longitudinal distribution

Authors: L. Rodríguez-García, R. Gómez-Herrero, I. Zouganelis, L. Balmaceda, T. Nieves-Chinchilla, N. Dresing, M. Dumbovic, N. V. Nitta, F. Carcaboso, L. F. G. dos Santos, L. K. Jian, L. Mays, D. Williams, J. Rodríguez-Pacheco

Abstract: Context: Late on 2013 August 19, STEREO-A, STEREO-B, MESSENGER, Mars Odyssey, and the L1 spacecraft, spanning a longitudinal range of 222° in the ecliptic plane, observed an energetic particle flux increase. The widespread solar energetic particle (SEP) event was associated with a coronal mass ejection (CME) that came from a region located near the far-side central meridian from Earth's perspectiv… ▽ More Context: Late on 2013 August 19, STEREO-A, STEREO-B, MESSENGER, Mars Odyssey, and the L1 spacecraft, spanning a longitudinal range of 222° in the ecliptic plane, observed an energetic particle flux increase. The widespread solar energetic particle (SEP) event was associated with a coronal mass ejection (CME) that came from a region located near the far-side central meridian from Earth's perspective. The CME erupted in two stages, and was accompanied by a late M-class flare observed as a post-eruptive arcade, persisting low-frequency (interplanetary) type II and groups of shock-accelerated type III radio bursts, all of them making this SEP event unusual. Aims: There are two main objectives of this study, disentangling the reasons for the different intensity-time profiles observed by the spacecraft, especially at MESSENGER and STEREO-A locations, longitudinally separated by only 15°, and unravelling the single solar source related with the widespread SEP event. Results: The solar source associated with the widespread SEP event is the shock driven by the CME, as the flare observed as a post-eruptive arcade is too late to explain the estimated particle onset. The different intensity-time profiles observed by STEREO-A, located at 0.97 au, and MESSENGER, at 0.33 au, can be interpreted as enhanced particle scattering beyond Mercury's orbit. The longitudinal extent of the shock does not explain by itself the wide spread of particles in the heliosphere. The particle increase observed at L1 may be attributed to cross-field diffusion transport, and this is also the case for STEREO-B, at least until the spacecraft is eventually magnetically connected to the shock when it reaches ~0.6 au. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Comments: 23 pages, 13 figures

Journal ref: A&A 653, A137 (2021)

Probabilistic Drag-Based Ensemble Model (DBEM) Evaluation for Heliospheric Propagation of CMEs

Authors: Jaša Čalogović, Mateja Dumbović, Davor Sudar, Bojan Vršnak, Karmen Martinić, Manuela Temmer, Astrid Veronig

Abstract: The Drag-based Model (DBM) is a 2D analytical model for heliospheric propagation of Coronal Mass Ejections (CMEs) in ecliptic plane predicting the CME arrival time and speed at Earth or any other given target in the solar system. It is based on the equation of motion and depends on initial CME parameters, background solar wind speed, $w$ and the drag parameter $γ$. A very short computational time… ▽ More The Drag-based Model (DBM) is a 2D analytical model for heliospheric propagation of Coronal Mass Ejections (CMEs) in ecliptic plane predicting the CME arrival time and speed at Earth or any other given target in the solar system. It is based on the equation of motion and depends on initial CME parameters, background solar wind speed, $w$ and the drag parameter $γ$. A very short computational time of DBM ($<$ 0.01s) allowed us to develop the Drag-Based Ensemble Model (DBEM) that takes into account the variability of model input parameters by making an ensemble of n different input parameters to calculate the distribution and significance of the DBM results. Thus the DBEM is able to calculate the most likely CME arrival times and speeds, quantify the prediction uncertainties and determine the confidence intervals. A new DBEMv3 version is described in detail and evaluated for the first time determing the DBEMv3 performance and errors by using various CME-ICME lists as well as it is compared with previous DBEM versions. The analysis to find the optimal drag parameter $γ$ and ambient solar wind speed $w$ showed that somewhat higher values ($γ\approx 0.3 \times 10^{-7}$ km$^{-1}$, $w \approx$ 425 km\,s$^{-1}$) for both of these DBEM input parameters should be used for the evaluation compared to the previously employed ones. Based on the evaluation performed for 146 CME-ICME pairs, the DBEMv3 performance with mean error (ME) of -11.3 h, mean absolute error (MAE) of 17.3 h was obtained. There is a clear bias towards the negative prediction errors where the fast CMEs are predicted to arrive too early, probably due to the model physical limitations and input errors (e.g. CME launch speed). △ Less

Submitted 14 July, 2021; originally announced July 2021.

Journal ref: Solar Physics 2021

The 2019 International Women's Day event: A two-step solar flare with multiple eruptive signatures and low Earth impact

Authors: Dumbovic, M., Veronig, A. M., Podladchikova, T., Thalmann, J. K., Chikunova, G., Dissauer, K., Magdalenic, J., Temmer, M., Guo, J., Samara, E

Abstract: We present a detailed analysis of an eruptive event that occurred on early 2019 March 8 in active region AR 12734, to which we refer as the International Women's day event. The event under study is intriguing in several aspects: 1) low-coronal eruptive signatures come in ''pairs'' (a double-peak flare, two coronal dimmings, and two EUV waves); 2) although the event is characterized by a complete c… ▽ More We present a detailed analysis of an eruptive event that occurred on early 2019 March 8 in active region AR 12734, to which we refer as the International Women's day event. The event under study is intriguing in several aspects: 1) low-coronal eruptive signatures come in ''pairs'' (a double-peak flare, two coronal dimmings, and two EUV waves); 2) although the event is characterized by a complete chain of eruptive signatures, the corresponding coronagraphic signatures are weak; 3) although the source region of the eruption is located close to the center of the solar disc and the eruption is thus presumably Earth-directed, heliospheric signatures are very weak with little Earth-impact. We analyze a number of multi-spacecraft and multi-instrument (both remote-sensing and in situ) observations, including Soft X-ray, (extreme-) ultraviolet (E)UV), radio and white-light emission, as well as plasma, magnetic field and particle measurements. We employ 3D NLFF modeling to investigate the coronal magnetic field configuration in and around the active region, the GCS model to make a 3D reconstruction of the CME geometry and the 3D MHD numerical model EUHFORIA to model the background state of the heliosphere. Our results indicate two subsequent eruptions of two systems of sheared and twisted magnetic fields, which merge already in the upper corona and start to evolve further out as a single entity. The large-scale magnetic field significantly influences both, the early and the interplanetary evolution of the structure. During the first eruption the stability of the overlying field was disrupted which enabled the second eruption. We find that during the propagation in the interplanetary space the large-scale magnetic field, i.e. , the location of heliospheric current sheet between the AR and the Earth likely influences propagation and the evolution of the erupted structure(s). △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 20 pages, 14 figures

Journal ref: A&A 652, A159 (2021)

Drag-based model (DBM) tools for forecast of coronal mass ejection arrival time and speed

Authors: Mateja Dumbovic, Jasa Calogovic, Karmen Martinic, Bojan Vrsnak, Davor Sudar, Manuela Temmer, Astrid Veronig

Abstract: Forecasting the arrival time of CMEs and their associated shocks is one of the key aspects of space weather research. One of the commonly used models is, due to its simplicity and calculation speed, the analytical drag-based model (DBM) for heliospheric propagation of CMEs. DBM relies on the observational fact that slow CMEs accelerate whereas fast CMEs decelerate, and is based on the concept of M… ▽ More Forecasting the arrival time of CMEs and their associated shocks is one of the key aspects of space weather research. One of the commonly used models is, due to its simplicity and calculation speed, the analytical drag-based model (DBM) for heliospheric propagation of CMEs. DBM relies on the observational fact that slow CMEs accelerate whereas fast CMEs decelerate, and is based on the concept of MHD drag, which acts to adjust the CME speed to the ambient solar wind. Although physically DBM is applicable only to the CME magnetic structure, it is often used as a proxy for the shock arrival. In recent years, the DBM equation has been used in many studies to describe the propagation of CMEs and shocks with different geometries and assumptions. Here we give an overview of the five DBM versions currently available and their respective tools, developed at Hvar Observatory and frequently used by researchers and forecasters. These include: 1) basic 1D DBM, a 1D model describing the propagation of a single point (i.e. the apex of the CME) or concentric arc (where all points propagate identically); 2) advanced 2D self-similar cone DBM, a 2D model which combines basic DBM and cone geometry describing the propagation of the CME leading edge which evolves self-similarly; 3) 2D flattening cone DBM, a 2D model which combines basic DBM and cone geometry describing the propagation of the CME leading edge which does not evolve self-similarly; 4) DBEM, an ensemble version of the 2D flattening cone DBM which uses CME ensembles as an input and 5) DBEMv3, an ensemble version of the 2D flattening cone DBM which creates CME ensembles based on the input uncertainties. All five versions have been tested and published in recent years and are available online or upon request. We provide an overview of these five tools, of their similarities and differences, as well as discuss and demonstrate their application. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Comments: 21 pages, 4 figures, 2 tables, accepted in Frontiers March 24th 2021

Radial Evolution of the April 2020 Stealth Coronal Mass Ejection between 0.8 and 1 AU -- A Comparison of Forbush Decreases at Solar Orbiter and Earth

Authors: Johan L. Freiherr von Forstner, Mateja Dumbović, Christian Möstl, **gnan Guo, Athanasios Papaioannou, Robert Elftmann, Zigong Xu, Jan Christoph Terasa, Alexander Kollhoff, Robert F. Wimmer-Schweingruber, Javier Rodríguez-Pacheco, Andreas J. Weiss, Jürgen Hinterreiter, Tanja Amerstorfer, Maike Bauer, Anatoly V. Belov, Maria A. Abunina, Timothy Horbury, Emma E. Davies, Helen O'Brien, Robert C. Allen, G. Bruce Andrews, Lars Berger, Sebastian Boden, Ignacio Cernuda Cangas , et al. (18 additional authors not shown)

Abstract: Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic r… ▽ More Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic ray count rate using its single detector counters. The analytical ForbMod model is applied to the FD measurements to reproduce the Forbush decrease at both locations. Input parameters for the model are derived from both in situ and remote-sensing observations of the CME. Results. The very slow (~350 km/s) stealth CME caused a FD with an amplitude of 3 % in the low-energy cosmic ray measurements at HET and 2 % in a comparable channel of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter, as well as a 1 % decrease in neutron monitor measurements. Significant differences are observed in the expansion behavior of the CME at different locations, which may be related to influence of the following high speed solar wind stream. Under certain assumptions, ForbMod is able to reproduce the observed FDs in low-energy cosmic ray measurements from HET as well as CRaTER, but with the same input parameters, the results do not agree with the FD amplitudes at higher energies measured by neutron monitors on Earth. We study these discrepancies and provide possible explanations. Conclusions. This study highlights that the novel measurements of the Solar Orbiter can be coordinated with other spacecraft to improve our understanding of space weather in the inner heliosphere. Multi-spacecraft observations combined with data-based modeling are also essential to understand the propagation and evolution of CMEs as well as their space weather impacts. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 656, A1 (2021)

Earth-affecting Solar Transients: A Review of Progresses in Solar Cycle 24

Authors: Jie Zhang, Manuela Temmer, Nat Gopalswamy, Olga Malandraki, Nariaki V. Nitta, Spiros Patsourakos, Fang Shen, Bojan Vršnak, Yuming Wang, David Webb, Mihir I. Desai, Karin Dissauer, Nina Dresing, Mateja Dumbović, Xueshang Feng, Stephan G. Heinemann, Monica Laurenza, Noé Lugaz, Bin Zhuang

Abstract: This review article summarizes the advancement in the studies of Earth-affecting solar transients in the last decade that encompasses most of solar cycle 24. The Sun Earth is an integrated physical system in which the space environment of the Earth sustains continuous influence from mass, magnetic field and radiation energy output of the Sun in varying time scales from minutes to millennium. This… ▽ More This review article summarizes the advancement in the studies of Earth-affecting solar transients in the last decade that encompasses most of solar cycle 24. The Sun Earth is an integrated physical system in which the space environment of the Earth sustains continuous influence from mass, magnetic field and radiation energy output of the Sun in varying time scales from minutes to millennium. This article addresses short time scale events, from minutes to days that directly cause transient disturbances in the Earth space environment and generate intense adverse effects on advanced technological systems of human society. Such transient events largely fall into the following four types: (1) solar flares, (2) coronal mass ejections (CMEs) including their interplanetary counterparts ICMEs, (3) solar energetic particle (SEP) events, and (4) stream interaction regions (SIRs) including corotating interaction regions (CIRs). In the last decade, the unprecedented multi viewpoint observations of the Sun from space, enabled by STEREO Ahead/Behind spacecraft in combination with a suite of observatories along the Sun-Earth lines, have provided much more accurate and global measurements of the size, speed, propagation direction and morphology of CMEs in both 3-D and over a large volume in the heliosphere. Several advanced MHD models have been developed to simulate realistic CME events from the initiation on the Sun until their arrival at 1 AU. Much progress has been made on detailed kinematic and dynamic behaviors of CMEs, including non-radial motion, rotation and deformation of CMEs, CME-CME interaction, and stealth CMEs and problematic ICMEs. The knowledge about SEPs has also been significantly improved. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: Review article, 184 pages

Propagating Conditions and the Time of ICMEs Arrival: A Comparison of the Effective Acceleration Model with ENLIL and DBEM Models

Authors: Evangelos Paouris, Jasa Calogovic, Mateja Dumbovic, M. Leila Mays, Angelos Vourlidas, Athanasios Papaioannou, Anastasios Anastasiadis, Georgios Balasis

Abstract: The Effective Acceleration Model (EAM) predicts the Time-of-Arrival (ToA) of the Coronal Mass Ejection (CME) driven shock and the average speed within the sheath at 1 AU. The model is based on the assumption that the ambient solar wind interacts with the interplanetary CME (ICME) resulting in constant acceleration or deceleration. The upgraded version of the model (EAMv3), presented here, incorpor… ▽ More The Effective Acceleration Model (EAM) predicts the Time-of-Arrival (ToA) of the Coronal Mass Ejection (CME) driven shock and the average speed within the sheath at 1 AU. The model is based on the assumption that the ambient solar wind interacts with the interplanetary CME (ICME) resulting in constant acceleration or deceleration. The upgraded version of the model (EAMv3), presented here, incorporates two basic improvements: (a) a new technique for the calculation of the acceleration (or deceleration) of the ICME from the Sun to 1 AU and (b) a correction for the CME plane-of-sky speed. A validation of the upgraded EAM model is performed via comparisons to predictions from the ensemble version of the Drag-Based model (DBEM) and the WSA-ENLIL+Cone ensemble model. A common sample of 16 CMEs/ICMEs, in 2013-2014, is used for the comparison. Basic performance metrics such as the mean absolute error (MAE), mean error (ME) and root mean squared error (RMSE) between observed and predicted values of ToA are presented. MAE for EAM model was 8.7$\pm$1.6 hours while for DBEM and ENLIL was 14.3$\pm$2.2 and 12.8$\pm$1.7 hours, respectively. ME for EAM was -1.4$\pm$2.7 hours in contrast with -9.7$\pm$3.4 and -6.1$\pm$3.3 hours from DBEM and ENLIL. We also study the hypothesis of stronger deceleration in the interplanetary (IP) space utilizing the EAMv3 and DBEM models. In particularly, the DBEM model perform better when a greater value of drag parameter, of order of a factor of 3, is used in contrast to previous studies. EAMv3 model shows a deceleration of ICMEs at greater distances, with a mean value of 0.72 AU. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 18 pages, 3 figures, 4 Tables. Accepted in Solar Physics

Deriving CME density from remote sensing data and comparison to in-situ measurements

Authors: M. Temmer, L. Holzknecht, M. Dumbovic, B. Vrsnak, N. Sachdeva, S. G. Heinemann, K. Dissauer, C. Scolini, E. Asvestari, A. M. Veronig, S. J. Hofmeister

Abstract: We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the… ▽ More We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the assumption that the CME mass is roughly equally distributed within a specific volume, we expand the CME self-similarly and calculate the CME density for distances close to the Sun (15-30 Rs) and at 1AU. Specific trends are derived comparing calculated and in-situ measured proton densities at 1AU, though large uncertainties are revealed due to the unknown mass and geometry evolution: i) a moderate correlation for the magnetic structure having a mass that stays rather constant (~0.56-0.59), and ii) a weak correlation for the sheath density (~0.26) by assuming the sheath region is an extra mass - as expected for a mass pile-up process - that is in its amount comparable to the initial CME deprojected mass. High correlations are derived between in-situ measured sheath density and the solar wind density (~ -0.73) and solar wind speed (~0.56) as measured 24 hours ahead of the arrival of the disturbance. This gives additional confirmation that the sheath-plasma indeed stems from piled-up solar wind material. While the CME interplanetary propagation speed is not related to the sheath density, the size of the CME may play some role in how much material could be piled up. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Sun-to-Earth Observations and Characteristics of Isolated Earth-Impacting Interplanetary Coronal Mass Ejections During 2008-2014

Authors: Darije Maričić, Bojan Vršnak, Astrid Veronig, Mateja Dumbović, Filip Šterc, Dragan Roša, Mile Karlica, Damir Hržina, Ivan Romštajn

Abstract: A sample of isolated Earth-impacting ICMEs that occurred in the period January 2008 to August 2014 is analysed in order to study in detail the ICME in situ signatures with respect to the type of filament eruption related to the corresponding CME. For Earth-directed CMEs, a kinematical study was performed using the STEREO-A, B COR1 and COR2 coronagraphs and the Heliospheric Imagers HI1. Based on th… ▽ More A sample of isolated Earth-impacting ICMEs that occurred in the period January 2008 to August 2014 is analysed in order to study in detail the ICME in situ signatures with respect to the type of filament eruption related to the corresponding CME. For Earth-directed CMEs, a kinematical study was performed using the STEREO-A, B COR1 and COR2 coronagraphs and the Heliospheric Imagers HI1. Based on the extrapolated CME kinematics, we identified interacting CMEs, which were excluded from further analysis. Applying this approach, a set of 31 isolated Earth-impacting CMEs was unambiguously identified and related to the in situ measurements recorded by the Wind spacecraft. We classified the events into subsets with respect to the CME source location as well as with respect to the type of the associated filament eruption. Hence, the events are divided into three subsamples: active region (AR) CMEs, disappearing filament (DSF) CMEs, and stealthy CMEs. The related three groups of ICMEs were further divided into two subsets: magnetic obstacle (MO) events (out of which four were stealthy), covering ICMEs that at least partly expose characteristics of flux ropes, and ejecta (EJ) events, not showing such characteristics. In the next step, MO-events were analysed in more detail, considering the magnetic field strengths and the plasma characteristics in three different segments of the ICMEs, defined as the turbulent sheath (TS), the frontal region (FR), and the MO itself. The analysis revealed various well-defined correlations for AR, DSF, and stealthy ICMEs, which we interpreted considering basic physical concepts. Our results support the hypothesis that ICMEs show different signatures depending on the in situ spacecraft trajectory, in terms of apex versus flank hits. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: 22 pages, 9 figures

Journal ref: 2020, papers published in Solar Physics

Evaluation of CME Arrival Prediction Using Ensemble Modeling Based on Heliospheric Imaging Observations

Authors: Tanja Amerstorfer, Jürgen Hinterreiter, Martin A. Reiss, Christian Möstl, Jackie A. Davies, Rachel L. Bailey, Andreas J. Weiss, Mateja Dumbović, Maike Bauer, Ute V. Amerstorfer, Richard A. Harrison

Abstract: In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coro… ▽ More In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the ecliptic plane is an ellipse, and allows the CME to adjust to the ambient solar wind speed, i.e. it is drag-based. ELEvoHI is used to perform ensemble simulations by varying the CME frontal shape within given boundary conditions that are consistent with the observations made by HI. In this work, we evaluate different set-ups of the model by performing hindcasts for 15 well-defined isolated CMEs that occurred when STEREO was near L4/5, between the end of 2008 and the beginning of 2011. In this way, we find a mean absolute error of between $6.2\pm7.9$ h and $9.9\pm13$ h depending on the model set-up used. ELEvoHI is specified for using data from future space weather missions carrying HIs located at L5 or L1. It can also be used with near real-time STEREO-A HI beacon data to provide CME arrival predictions during the next $\sim7$ years when STEREO-A is observing the Sun-Earth space. △ Less

Submitted 16 February, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 25 pages, 9 figures, 2 tables; This article also appears in: Heliophysics and Space Weather Studies from the Sun-Earth Lagrange Points

Journal ref: AGU Space Weather, 2021, Volume19, Issue 1

Solar Flare-CME Coupling Throughout Two Acceleration Phases of a Fast CME

Authors: Tingyu Gou, Astrid M. Veronig, Rui Liu, Bin Zhuang, Mateja Dumbovic, Tatiana Podladchikova, Hamish A. S. Reid, Manuela Temmer, Karin Dissauer, Bojan Vrsnak, Yuming Wang

Abstract: Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an im… ▽ More Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an impulsive one with a peak value of ~5 km s$^{-2}$ followed by an extended phase with accelerations up to 0.7 km s$^{-2}$. The two-phase CME dynamics is associated with a two-episode flare energy release. While the first episode is consistent with the "standard" eruption of a magnetic flux rope, the second episode of flare energy release is initiated by the reconnection of a large-scale loop in the aftermath of the eruption and produces stronger nonthermal emission up to $γ$-rays. In addition, this long-duration flare reveals clear signs of ongoing magnetic reconnection during the decay phase, evidenced by extended HXR bursts with energies up to 100--300 keV and intermittent downflows of reconnected loops for >4 hours. The observations reveal that the two-step flare reconnection substantially contributes to the two-phase CME acceleration, and the impulsive CME acceleration precedes the most intense flare energy release. The implications of this non-standard flare/CME observation are discussed. △ Less

Submitted 20 June, 2020; originally announced June 2020.

Comments: accepted for publication in ApJL

Evolution of coronal mass ejections and the corresponding Forbush decreases: modelling vs multi-spacecraft observations

Authors: Mateja Dumbović, Bojan Vršnak, **gnan Guo, Bernd Heber, Karin Dissauer, Fernando Carcaboso, Manuela Temmer, Astrid Veronig, Tatiana Podladchikova, Christian Möstl, Tanja Amerstorfer, Anamarija Kirin

Abstract: One of the very common in situ signatures of interplanetary coronal mass ejections (ICMEs), as well as other interplanetary transients, are Forbush decreases (FDs), i.e. short-term reductions in the galactic cosmic ray (GCR) flux. A two-step FD is often regarded as a textbook example, which presumably owes its specific morphology to the fact that the measuring instrument passed through the ICME he… ▽ More One of the very common in situ signatures of interplanetary coronal mass ejections (ICMEs), as well as other interplanetary transients, are Forbush decreases (FDs), i.e. short-term reductions in the galactic cosmic ray (GCR) flux. A two-step FD is often regarded as a textbook example, which presumably owes its specific morphology to the fact that the measuring instrument passed through the ICME head-on, encountering first the shock front (if developed), then the sheath and finally the CME magnetic structure. The interaction of GCRs and the shock/sheath region, as well as the CME magnetic structure, occurs all the way from Sun to Earth, therefore, FDs are expected to reflect the evolutionary properties of CMEs and their sheaths. We apply modelling to different ICME regions in order to obtain a generic two-step FD profile, which qualitatively agrees with our current observation-based understanding of FDs. We next adapt the models for energy dependence to enable comparison with different GCR measurement instruments (as they measure in different particle energy ranges). We test these modelling efforts against a set of multi-spacecraft observations of the same event, using the Forbush decrease model for the expanding flux rope (ForbMod). We find a reasonable agreement of the ForbMod model for the GCR depression in the CME magnetic structure with multi-spacecraft measurements, indicating that modelled FDs reflect well the CME evolution. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Comments: 40 pages, 11 figures, accepted in Solar Physics

Comparing the Properties of ICME-Induced Forbush Decreases at Earth and Mars

Authors: Johan L. Freiherr von Forstner, **gnan Guo, Robert F. Wimmer-Schweingruber, Mateja Dumbović, Miho Janvier, Pascal Démoulin, Astrid Veronig, Manuela Temmer, Athanasios Papaioannou, Sergio Dasso, Donald M. Hassler, Cary J. Zeitlin

Abstract: Forbush decreases (FDs), which are short-term drops in the flux of galactic cosmic rays, are caused by the shielding from strong and/or turbulent magnetic structures in the solar wind, especially interplanetary coronal mass ejections (ICMEs) and their associated shocks, as well as corotating interaction regions. Such events can be observed at Earth, for example, using neutron monitors, and also at… ▽ More Forbush decreases (FDs), which are short-term drops in the flux of galactic cosmic rays, are caused by the shielding from strong and/or turbulent magnetic structures in the solar wind, especially interplanetary coronal mass ejections (ICMEs) and their associated shocks, as well as corotating interaction regions. Such events can be observed at Earth, for example, using neutron monitors, and also at many other locations in the solar system, such as on the surface of Mars with the Radiation Assessment Detector instrument onboard Mars Science Laboratory. They are often used as a proxy for detecting the arrival of ICMEs or corotating interaction regions, especially when sufficient in situ solar wind measurements are not available. We compare the properties of FDs observed at Earth and Mars, focusing on events produced by ICMEs. We find that FDs at both locations show a correlation between their total amplitude and the maximum hourly decrease, but with different proportionality factors. We explain this difference using theoretical modeling approaches and suggest that it is related to the size increase of ICMEs, and in particular their sheath regions, en route from Earth to Mars. From the FD data, we can derive the sheath broadening factor to be between about 1.5 and 1.9, agreeing with our theoretical considerations. This factor is also in line with previous measurements of the sheath evolution closer to the Sun. △ Less

Submitted 16 March, 2020; v1 submitted 6 March, 2020; originally announced March 2020.

Journal ref: Journal of Geophysical Research: Space Physics, 125, e2019JA027662

On the Interaction of Galactic Cosmic Rays with Heliospheric Shocks During Forbush Decreases

Authors: Anamarija Kirin, Bojan Vršnak, Mateja Dumbović, Bernd Heber

Abstract: Forbush decreases (FDs) are depletions in the galactic cosmic ray (GCR) count rate that last typically for about a week and can be caused by coronal mass ejections (CMEs) or corotating interacting regions (CIRs). Fast CMEs that drive shocks cause large FDs that often show a two-step decrease where the first step is attributed to the shock/sheath region, while the second step is attributed to the c… ▽ More Forbush decreases (FDs) are depletions in the galactic cosmic ray (GCR) count rate that last typically for about a week and can be caused by coronal mass ejections (CMEs) or corotating interacting regions (CIRs). Fast CMEs that drive shocks cause large FDs that often show a two-step decrease where the first step is attributed to the shock/sheath region, while the second step is attributed to the closed magnetic structure. Since the difference in size of shock and sheath region is significant, and since there are observed effects that can be related to shocks and not necessarily to the sheath region we expect that the physical mechanisms governing the interaction with GCRs in these two regions are different. We therefore aim to analyse interaction of GCRs with heliospheric shocks only. We approximate the shock by a structure where the magnetic field linearly changes with position within this structure. We assume protons of different energy, different pitch angle and different incoming direction. We also vary the shock parameters such as the magnetic field strength and orientation, as well as the shock thickness. The results demonstrate that protons with higher energies are less likely to be reflected. Also, thicker shocks and shocks with stronger field reflect protons more efficiently. △ Less

Submitted 13 February, 2020; originally announced February 2020.

CME-CME Interactions as Sources of CME Geo-effectiveness: The Formation of the Complex Ejecta and Intense Geomagnetic Storm in Early September 2017

Authors: Camilla Scolini, Emmanuel Chané, Manuela Temmer, Emilia K. J. Kilpua, Karin Dissauer, Astrid M. Veronig, Erika Palmerio, Jens Pomoell, Mateja Dumbović, **gnan Guo, Luciano Rodriguez, Stefaan Poedts

Abstract: Coronal mass ejections (CMEs) are the primary sources of intense disturbances at Earth, where their geo-effectiveness is largely determined by their dynamic pressure and internal magnetic field, which can be significantly altered during interactions with other CMEs in interplanetary space. We analyse three successive CMEs that erupted from the Sun during September 4-6, 2017, investigating the role… ▽ More Coronal mass ejections (CMEs) are the primary sources of intense disturbances at Earth, where their geo-effectiveness is largely determined by their dynamic pressure and internal magnetic field, which can be significantly altered during interactions with other CMEs in interplanetary space. We analyse three successive CMEs that erupted from the Sun during September 4-6, 2017, investigating the role of CME-CME interactions as source of the associated intense geomagnetic storm (Dst_min=-142 nT on September 7). To quantify the impact of interactions on the (geo-)effectiveness of individual CMEs, we perform global heliospheric simulations with the EUHFORIA model, using observation-based initial parameters with the additional purpose of validating the predictive capabilities of the model for complex CME events. The simulations show that around 0.45 AU, the shock driven by the September 6 CME started compressing a preceding magnetic ejecta formed by the merging of two CMEs launched on September 4, significantly amplifying its Bz until a maximum factor of 2.8 around 0.9 AU. The following gradual conversion of magnetic energy into kinetic and thermal components reduced the Bz amplification until its almost complete disappearance around 1.8 AU. We conclude that a key factor at the origin of the intense storm triggered by the September 4-6, 2017 CMEs was their arrival at Earth during the phase of maximum Bz amplification. Our analysis highlights how the amplification of the magnetic field of individual CMEs in space-time due to interaction processes can be characterised by a growth, a maximum, and a decay phase, suggesting that the time interval between the CME eruptions and their relative speeds are critical factors in determining the resulting impact of complex CMEs at various heliocentric distances (helio-effectiveness). △ Less

Submitted 25 November, 2019; originally announced November 2019.

CME -- HSS interaction and characteristics tracked from Sun to Earth

Authors: Stephan G. Heinemann, Manuela Temmer, Charles J. Farrugia, Karin Dissauer, Christina Kay, Thomas Wiegelmann, Mateja Dumbović, Astrid M. Veronig, Tatiana Podladchikova, Stefan J. Hofmeister, Noé Lugaz, Fernando Carcaboso

Abstract: In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interac… ▽ More In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interaction with a HSS, which emanates from a coronal hole (CH) close to the launch site of the CME. The results indicate that the major interaction between the CME and the HSS starts at a height of 1.3 Rsun up to 3 Rsun. Over that distance range, the CME undergoes a strong north-eastward deflection of at least 30 degrees due to the open magnetic field configuration of the CH. We perform a comprehensive analysis for the CME-HSS event using multi-viewpoint data (from the Solar TErrestrial RElations Observatories, the Solar and Heliospheric Observatory and the Solar Dynamics Observatory), and combined modeling efforts (nonlinear force-free field modeling, Graduated Cylindrical Shell CME modeling, and the Forecasting a CMEs Altered Trajectory ForeCAT model). We aim at better understanding its early evolution and interaction process as well as its interplanetary propagation and related in situ signatures, and finally the resulting impact on the Earth's magnetosphere. △ Less

Submitted 27 August, 2019; originally announced August 2019.

Comments: Accepted in Solar Physics on August 26, 2019

A statistical study of long-term evolution of coronal hole properties as observed by SDO

Authors: Stephan G. Heinemann, Veronika Jerčić, Manuela Temmer, Stefan J. Hofmeister, Mateja Dumbović, Susanne Vennerstroem, Giuliana Verbanac, Astrid M. Veronig

Abstract: The study of the evolution of coronal holes (CHs) is especially important in the context of high-speed solar wind streams (HSS) emanating from them. Stream interaction regions may deliver large amount of energy into the Earths system, cause geomagnetic storms, and shape interplanetary space. By statistically analysing 16 long-living CHs observed by the SDO, we focus on coronal, morphological and u… ▽ More The study of the evolution of coronal holes (CHs) is especially important in the context of high-speed solar wind streams (HSS) emanating from them. Stream interaction regions may deliver large amount of energy into the Earths system, cause geomagnetic storms, and shape interplanetary space. By statistically analysing 16 long-living CHs observed by the SDO, we focus on coronal, morphological and underlying photospheric magnetic field characteristics as well as investigate the evolution of the associated HSSs. We use CATCH to extract and analyse CHs using observations taken by AIA and HMI. We derive changes in the CH properties and correlate them to the CH evolution. Further we analyse the properties of the HSS signatures near 1au from OMNI data by manually extracting the peak bulk velocity of the solar wind plasma. We find that the area evolution of CHs mostly shows a rough trend of growing to a maximum followed by a decay. No correlation of the area evolution to the evolution of the signed magnetic flux and signed magnetic flux density enclosed in the projected CH area was found. From this we conclude that the magnetic flux within the extracted CH boundaries is not the main cause for its area evolution. We derive CH area change rates (growth and decay) of 14.2 +/- 15.0 * 10^8 km^2/day showing a reasonable anti-correlation (cc =-0.48) to the solar activity, approximated by the sunspot number. The change rates of the signed mean magnetic flux density (27.3 +/- 32.2 mG/day) and the signed magnetic flux (30.3 +/- 31.5 * 10^18 Mx/day) were also found to be dependent on solar activity (cc =0.50 and cc =0.69 respectively) rather than on the individual CH evolutions. Further we find that the CH area-to-HSS peak velocity relation is valid for each CH over its evolution but revealing significant variations in the slopes of the regression lines. △ Less

Submitted 21 April, 2020; v1 submitted 5 July, 2019; originally announced July 2019.

Comments: Accepted at A&A

Journal ref: A&A 638, A68 (2020)

Unusual plasma and particle signatures at Mars and STEREO-A related to CME-CME interaction

Authors: Mateja Dumbovic, **gnan Guo, Manuela Temmer, M. Leila Mays, Astrid Veronig, Stephan Heinemann, Karin Dissauer, Stefan Hofmeister, Jasper Halekas, Christian Möstl, Tanja Amerstorfer, Jürgen Hinterreiter, Sasa Banjac, Konstantin Herbst, Yuming Wang, Lukas Holzknecht, Martin Leitner, Robert F. Wimmer-Schweingruber

Abstract: On July 25 2017 a multi-step Forbush decrease (FD) with the remarkable total amplitude of more than 15\% was observed by MSL/RAD at Mars. We find that these particle signatures are related to very pronounced plasma and magnetic field signatures detected in situ by STEREO-A on July 24 2017, with a higher than average total magnetic field strength reaching more than 60 nT. In the observed time perio… ▽ More On July 25 2017 a multi-step Forbush decrease (FD) with the remarkable total amplitude of more than 15\% was observed by MSL/RAD at Mars. We find that these particle signatures are related to very pronounced plasma and magnetic field signatures detected in situ by STEREO-A on July 24 2017, with a higher than average total magnetic field strength reaching more than 60 nT. In the observed time period STEREO-A was at a relatively small longitudinal separation (46 degrees) to Mars and both were located at the back side of the Sun as viewed from Earth. We analyse a number of multi-spacecraft and multi-instrument (both in situ and remote-sensing) observations, and employ modelling to understand these signatures. We find that the solar sources are two CMEs which erupted on July 23 2017 from the same source region on the back side of the Sun as viewed from Earth. Moreover, we find that the two CMEs interact non-uniformly, inhibiting the expansion of one of the CMEs in STEREO-A direction, whereas allowing it to expand more freely in the Mars direction. The interaction of the two CMEs with the ambient solar wind adds up to the complexity of the event, resulting in a long, sub-structured interplanetary disturbance at Mars, where different sub-structures correspond to different steps of the FD, adding-up to a globally large-amplitude FD. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: 25 pages, 9 figures

CME volume calculation from 3D GCS reconstruction

Authors: L. Holzknecht, M. Temmer, M. Dumbovic, S. Wellenzohn, K. Krikova, S. G. Heinemann, M. Rodari, B. Vrsnak, A. M. Veronig

Abstract: The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from r… ▽ More The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from remote sensing data using 3D reconstructed CME geometry, we can calculate the CME density and compare it with in-situ proton density measurements near Earth. From that we may draw important conclusions on a possible mass increase as the CME interacts with the ambient solar wind in the heliosphere. In this paper we will describe in detail the method for deriving the CME volume using the graduated cylindrical shell (GCS) model (Thernisien et al., 2006,2009, see Figure 1). We show that, assuming self-similar expansion, one can derive the volume of the CME from two GCS parameters and that it furthermore can be expressed as a function of distance. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: accepted for publication in the Central European Astrophysical Bulletin (CEAB)

Tracking and Validating ICMEs Propagating Toward Mars Using STEREO Heliospheric Imagers Combined With Forbush Decreases Detected by MSL/RAD

Authors: Johan L. Freiherr von Forstner, **gnan Guo, Robert F. Wimmer-Schweingruber, Manuela Temmer, Mateja Dumbović, Astrid Veronig, Christian Möstl, Donald M. Hassler, Cary J. Zeitlin, Bent Ehresmann

Abstract: The Radiation Assessment Detector (RAD) instrument onboard the Mars Science Laboratory (MSL) mission's Curiosity rover has been measuring galactic cosmic rays (GCR) as well as solar energetic particles (SEP) on the surface of Mars for more than 6 years since its landing in August 2012. The observations include a large number of Forbush decreases (FD) caused by interplanetary coronal mass ejections… ▽ More The Radiation Assessment Detector (RAD) instrument onboard the Mars Science Laboratory (MSL) mission's Curiosity rover has been measuring galactic cosmic rays (GCR) as well as solar energetic particles (SEP) on the surface of Mars for more than 6 years since its landing in August 2012. The observations include a large number of Forbush decreases (FD) caused by interplanetary coronal mass ejections (ICMEs) and/or their associated shocks shielding away part of the GCR particles with their turbulent and enhanced magnetic fields while passing Mars. This study combines MSL/RAD FD measurements and remote tracking of ICMEs using the Solar TErrestrial RElations Observatory (STEREO) Heliospheric Imager (HI) telescopes in a statistical study for the first time. The large data set collected by HI makes it possible to analyze 149 ICMEs propagating toward MSL both during its 8-month cruise phase and after its landing on Mars. We link 45 of the events observed at STEREO-HI to their corresponding FDs at MSL/RAD and study the accuracy of the ICME arrival time at Mars predicted from HI data using different methods. The mean differences between the predicted arrival times and those observed using FDs range from -11 to 5 hr for the different methods, with standard deviations between 17 and 20 hr. These values for predictions at Mars are very similar compared to other locations closer to the Sun and also comparable to the precision of some other modeling approaches. △ Less

Submitted 25 April, 2019; v1 submitted 24 April, 2019; originally announced April 2019.

Heliospheric Evolution of Magnetic Clouds

Authors: Bojan Vršnak, Tanja Amerstorfer, Mateja Dumbović, Martin Leitner, Astrid M. Veronig, Manuela Temmer, Christian Möstl, Ute V. Amerstorfer, Charles J. Farrugia, Antoinette B. Galvin

Abstract: Interplanetary evolution of eleven magnetic clouds (MCs) recorded by at least two radially aligned spacecraft is studied. The in situ magnetic field measurements are fitted to a cylindrically symmetric Gold-Hoyle force-free uniform-twist flux-rope configuration. The analysis reveals that in a statistical sense the expansion of studied MCs is compatible with self-similar behavior. However, individu… ▽ More Interplanetary evolution of eleven magnetic clouds (MCs) recorded by at least two radially aligned spacecraft is studied. The in situ magnetic field measurements are fitted to a cylindrically symmetric Gold-Hoyle force-free uniform-twist flux-rope configuration. The analysis reveals that in a statistical sense the expansion of studied MCs is compatible with self-similar behavior. However, individual events expose a large scatter of expansion rates, ranging from very weak to very strong expansion. Individually, only four events show an expansion rate compatible with the isotropic self-similar expansion. The results indicate that the expansion has to be much stronger when MCs are still close to the Sun than in the studied 0.47 - 4.8 AU distance range. The evolution of the magnetic field strength shows a large deviation from the behavior expected for the case of an isotropic self-similar expansion. In the statistical sense, as well as in most of the individual events, the inferred magnetic field decreases much slower than expected. Only three events show a behavior compatible with a self-similar expansion. There is also a discrepancy between the magnetic field decrease and the increase of the MC size, indicating that magnetic reconnection and geometrical deformations play a significant role in the MC evolution. About half of the events show a decay of the electric current as expected for the self-similar expansion. Statistically, the inferred axial magnetic flux is broadly consistent with it remaining constant. However, events characterized by large magnetic flux show a clear tendency of decreasing flux. △ Less

Submitted 17 April, 2019; originally announced April 2019.

Comments: 64 pages, 10 figures

3D Reconstruction and Interplanetary Expansion of the 2010 April 3rd CME

Authors: Martina Rodari, Mateja Dumbović, Manuela Temmer, Lukas M. Holzknecht, Astrid Veronig

Abstract: We analyse the 2010 April 3rd CME using spacecraft coronagraphic images at different vantage points (SOHO, STEREO-A and STEREO-B). We perform a 3D reconstruction of both the flux rope and shock using the Graduated Cylindrical Shell (GCS) model to calculate CME kinematic and morphologic parameters (e.g. velocity, acceleration, radius). The obtained results are fitted with empirical models describin… ▽ More We analyse the 2010 April 3rd CME using spacecraft coronagraphic images at different vantage points (SOHO, STEREO-A and STEREO-B). We perform a 3D reconstruction of both the flux rope and shock using the Graduated Cylindrical Shell (GCS) model to calculate CME kinematic and morphologic parameters (e.g. velocity, acceleration, radius). The obtained results are fitted with empirical models describing the expansion of the CME radius in the heliosphere and compared with in situ measurements from Wind spacecraft: the CME is found to expand linearly towards Earth. Finally, we relate the event with decreases in the Galactic Cosmic Ray (GCR) Flux, known as Forbush decreases (FD), detected by EPHIN instrument onboard SOHO spacecraft. We use the analytical diffusion-expansion model (ForbMod) to calculate the magnetic field power law index, obtaining a value of approximately 1.6, thus estimating a starting magnetic field of around 0.01 G and an axial magnetic flux of around 5x1E20 Mx at 15.6 Rsun. △ Less

Submitted 11 April, 2019; originally announced April 2019.

Comments: 8 pages, 3 figures, Central European Astrophysical Bulletin

Benchmarking CME Arrival Time and Impact: Progress on Metadata, Metrics, and Events

Authors: C. Verbeke, M. L. Mays, M. Temmer, S. Bingham, R. Steenburgh, M. Dumbović, M. Núñez, L. K. Jian, P. Hess, C. Wiegand, A. Taktakishvili, J. Andries

Abstract: Accurate forecasting of the arrival time and subsequent geomagnetic impacts of Coronal Mass Ejections (CMEs) at Earth is an important objective for space weather forecasting agencies. Recently, the CME Arrival and Impact working team has made significant progress towards defining community-agreed metrics and validation methods to assess the current state of CME modeling capabilities. This will all… ▽ More Accurate forecasting of the arrival time and subsequent geomagnetic impacts of Coronal Mass Ejections (CMEs) at Earth is an important objective for space weather forecasting agencies. Recently, the CME Arrival and Impact working team has made significant progress towards defining community-agreed metrics and validation methods to assess the current state of CME modeling capabilities. This will allow the community to quantify our current capabilities and track progress in models over time. Firstly, it is crucial that the community focuses on the collection of the necessary metadata for transparency and reproducibility of results. Concerning CME arrival and impact we have identified 6 different metadata types: 3D CME measurement, model description, model input, CME (non-)arrival observation, model output data and metrics and validation methods. Secondly, the working team has also identified a validation time period, where all events within the following two periods will be considered: 1 January 2011-31 December 2012 and January 2015-31 December 2015. Those two periods amount to a total of about 100 hit events at Earth and a large amount of misses. Considering a time period will remove any bias in selecting events and the event set will represent a sample set that will not be biased by user selection. Lastly, we have defined the basic metrics and skill scores that the CME Arrival and Impact working team will focus on. △ Less

Submitted 26 November, 2018; originally announced November 2018.

Comments: special issue: Space Weather Capabilities Assessment

Forecasting the Arrival Time of Coronal Mass Ejections: Analysis of the CCMC CME Scoreboard

Authors: Pete Riley, Leila Mays, Jesse Andries, Tanja Amerstorfer, Douglas Biesecker, Veronique Delouille, Mateja Dumbovic, Xueshang Feng, Edmund Henley, Jon A. Linker, Christian Mostl, Marlon Nunez, Vic Pizzo, Manuela Temmer, W. K. Tobiska, C. Verbeke, Matthew J West, Xinhua Zhao

Abstract: Accurate forecasting of the properties of coronal mass ejections as they approach Earth is now recognized as an important strategic objective for both NOAA and NASA. The time of arrival of such events is a key parameter, one that had been anticipated to be relatively straightforward to constrain. In this study, we analyze forecasts submitted to the Community Coordinated Modeling Center (CCMC) at N… ▽ More Accurate forecasting of the properties of coronal mass ejections as they approach Earth is now recognized as an important strategic objective for both NOAA and NASA. The time of arrival of such events is a key parameter, one that had been anticipated to be relatively straightforward to constrain. In this study, we analyze forecasts submitted to the Community Coordinated Modeling Center (CCMC) at NASA's Goddard Space Flight Center over the last six years to answer the following questions: (1) How well do these models forecast the arrival time of CME-driven shocks? (2) What are the uncertainties associated with these forecasts? (3) Which model(s) perform best? (4) Have the models become more accurate during the past six years? We analyze all forecasts made by 32 models from 2013 through mid 2018, and additionally focus on 28 events all of which were forecasted by six models. We find that the models are generally able to predict CME-shock arrival times -- in an average sense -- to within 10 hours, but with standard deviations often exceeding 20 hours. The best performers, on the other hand, maintained a mean error (bias) of -1 hour, a mean absolute error of 13 hours, and a precision (s.d.) of 15 hours. Finally, there is no evidence that the forecasts have become more accurate during this interval. We discuss the intrinsic simplifications of the various models analyzed, the limitations of this investigation, and suggest possible paths to improve these forecasts in the future. △ Less

Submitted 16 October, 2018; originally announced October 2018.

An Analytical Diffusion-Expansion Model for Forbush Decreases Caused by Flux Ropes

Authors: Mateja Dumbović, Bernd Heber, Bojan Vršnak, Manuela Temmer, Anamarija Kirin

Abstract: We present an analytical diffusion-expansion Forbush decrease (FD) model ForbMod which is based on the widely used approach of the initially empty, closed magnetic structure (i.e. flux rope) which fills up slowly with particles by perpendicular diffusion. The model is restricted to explain only the depression caused by the magnetic structure of the interplanetary coronal mass ejection (ICME). We u… ▽ More We present an analytical diffusion-expansion Forbush decrease (FD) model ForbMod which is based on the widely used approach of the initially empty, closed magnetic structure (i.e. flux rope) which fills up slowly with particles by perpendicular diffusion. The model is restricted to explain only the depression caused by the magnetic structure of the interplanetary coronal mass ejection (ICME). We use remote CME observations and a 3D reconstruction method (the Graduated Cylindrical Shell method) to constrain initial boundary conditions of the FD model and take into account CME evolutionary properties by incorporating flux rope expansion. Several flux rope expansion modes are considered, which can lead to different FD characteristics. In general, the model is qualitatively in agreement with observations, whereas quantitative agreement depends on the diffusion coefficient and the expansion properties (interplay of the diffusion and the expansion). A case study was performed to explain the FD observed 2014 May 30. The observed FD was fitted quite well by ForbMod for all expansion modes using only the diffusion coefficient as a free parameter, where the diffusion parameter was found to correspond to expected range of values. Our study shows that in general the model is able to explain the global properties of FD caused by FR and can thus be used to help understand the underlying physics in case studies. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Comments: 20 pages, 8 figures

Modeling the evolution and propagation of the 2017 September 9th and 10th CMEs and SEPs arriving at Mars constrained by remote-sensing and in-situ measurement

Authors: **gnan Guo, Mateja Dumbović, Robert F. Wimmer-Schweingruber, Manuela Temmer, Henning Lohf, Yuming Wang, Astrid Veronig, Donald M. Hassler, Leila M. Mays, Cary Zeitlin, Bent Ehresmann, Oliver Witasse, Johan L. Freiherr von Forstner, Bernd Heber, Mats Holmström, Arik Posner

Abstract: On 2017-09-10, solar energetic particles (SEPs) originating from the active region 12673 were registered as a ground level enhancement (GLE) at Earth and the biggest GLE on the surface of Mars as observed by the Radiation Assessment Detector (RAD) since the landing of the Curiosity rover in August 2012. Based on multi-point coronagraph images, we identify the initial 3D kinematics of an extremely… ▽ More On 2017-09-10, solar energetic particles (SEPs) originating from the active region 12673 were registered as a ground level enhancement (GLE) at Earth and the biggest GLE on the surface of Mars as observed by the Radiation Assessment Detector (RAD) since the landing of the Curiosity rover in August 2012. Based on multi-point coronagraph images, we identify the initial 3D kinematics of an extremely fast CME and its shock front as well as another 2 CMEs launched hours earlier (with moderate speeds) using the Graduated Cylindrical Shell (GCS) model. These three CMEs interacted as they propagated outwards into the heliosphere and merged into a complex interplanetary CME (ICME). The arrival of the shock and ICME at Mars caused a very significant Forbush Decrease (FD) seen by RAD only a few hours later than that at Earth which is about 0.5 AU closer to the Sun. We investigate the propagation of the three CMEs and the consequent ICME together with the shock using the Drag Based Model (DBM) and the WSA-ENLIL plus cone model constrained by the in-situ SEP and FD/shock onset timing. The synergistic modeling of the ICME and SEP arrivals at Earth and Mars suggests that in order to better predict potentially hazardous space weather impacts at Earth and other heliospheric locations for human exploration missions, it is essential to analyze 1) the CME kinematics, especially during their interactions and 2) the spatially and temporally varying heliospheric conditions, such as the evolution and propagation of the stream interaction regions. △ Less

Submitted 30 July, 2018; v1 submitted 1 March, 2018; originally announced March 2018.

Drag-Based Ensemble Model (DBEM) for Coronal Mass Ejection Propagation

Authors: Mateja Dumbović, Jaša Čalogović, Bojan Vršnak, Manuela Temmer, M. Leila Mays, Astrid Veronig, Isabell Piantschitsch

Abstract: The drag-based model (DBM) for heliospheric propagation of coronal mass ejections (CMEs) is a widely used analytical model which can predict CME arrival time and speed at a given heliospheric location. It is based on the assumption that the propagation of CMEs in interplanetary space is solely under the influence of magnetohydrodynamical drag, where CME propagation is determined based on CME initi… ▽ More The drag-based model (DBM) for heliospheric propagation of coronal mass ejections (CMEs) is a widely used analytical model which can predict CME arrival time and speed at a given heliospheric location. It is based on the assumption that the propagation of CMEs in interplanetary space is solely under the influence of magnetohydrodynamical drag, where CME propagation is determined based on CME initial properties as well as the properties of the ambient solar wind. We present an upgraded version, covering ensemble modelling to produce a distribution of possible ICME arrival times and speeds, the drag-based ensemble model (DBEM). Multiple runs using uncertainty ranges for the input values can be performed in almost real-time, within a few minutes. This allows us to define the most likely ICME arrival times and speeds, quantify prediction uncertainties and determine forecast confidence. The performance of the DBEM is evaluated and compared to that of ensemble WSA-ENLIL+Cone model (ENLIL) using the same sample of events. It is found that the mean error is $ME=-9.7$ hours, mean absolute error $MAE=14.3$ hours and root mean square error $RMSE=16.7$ hours, which is somewhat higher than, but comparable to ENLIL errors ($ME=-6.1$ hours, $MAE=12.8$ hours and $RMSE=14.4$ hours). Overall, DBEM and ENLIL show a similar performance. Furthermore, we find that in both models fast CMEs are predicted to arrive earlier than observed, most probably owing to the physical limitations of models, but possibly also related to an overestimation of the CME initial speed for fast CMEs. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: 15 pages, 8 figures

Using Forbush decreases to derive the transit time of ICMEs propagating from 1 AU to Mars

Authors: Johan L. Freiherr von Forstner, **gnan Guo, Robert F. Wimmer-Schweingruber, Donald M. Hassler, Manuela Temmer, Mateja Dumbović, Lan K. Jian, Jan K. Appel, Jaša Čalogović, Bent Ehresmann, Bernd Heber, Henning Lohf, Arik Posner, Christian T. Steigies, Bojan Vršnak, Cary J. Zeitlin

Abstract: The propagation of 15 interplanetary coronal mass ejections (ICMEs) from Earth's orbit (1 AU) to Mars (~ 1.5 AU) has been studied with their propagation speed estimated from both measurements and simulations. The enhancement of magnetic fields related to ICMEs and their shock fronts cause the so-called Forbush decrease, which can be de- tected as a reduction of galactic cosmic rays measured on-gro… ▽ More The propagation of 15 interplanetary coronal mass ejections (ICMEs) from Earth's orbit (1 AU) to Mars (~ 1.5 AU) has been studied with their propagation speed estimated from both measurements and simulations. The enhancement of magnetic fields related to ICMEs and their shock fronts cause the so-called Forbush decrease, which can be de- tected as a reduction of galactic cosmic rays measured on-ground. We have used galactic cosmic ray (GCR) data from in-situ measurements at Earth, from both STEREO A and B as well as GCR measurements by the Radiation Assessment Detector (RAD) instrument onboard Mars Science Laboratory (MSL) on the surface of Mars. A set of ICME events has been selected during the periods when Earth (or STEREO A or B) and Mars locations were nearly aligned on the same side of the Sun in the ecliptic plane (so-called opposition phase). Such lineups allow us to estimate the ICMEs' transit times between 1 and 1.5 AU by estimating the delay time of the corresponding Forbush decreases measured at each location. We investigate the evolution of their propagation speeds before and after passing Earth's orbit and find that the deceleration of ICMEs due to their interaction with the ambient solar wind may continue beyond 1 AU. We also find a substantial variance of the speed evolution among different events revealing the dynamic and diverse nature of eruptive solar events. Furthermore, the results are compared to simulation data obtained from two CME propagation models, namely the Drag-Based Model and ENLIL plus cone model. △ Less

Submitted 19 December, 2017; originally announced December 2017.

Predicting Coronal Mass Ejections transit times to Earth with neural network

Authors: D. Sudar, B. Vršnak, M. Dumbović

Abstract: Predicting transit times of Coronal Mass Ejections (CMEs) from their initial parameters is a very important subject, not only from the scientific perspective, but also because CMEs represent a hazard for human technology. We used a neural network to analyse transit times for 153 events with only two input parameters: initial velocity of the CME, $v$, and Central Meridian Distance, CMD, of its asso… ▽ More Predicting transit times of Coronal Mass Ejections (CMEs) from their initial parameters is a very important subject, not only from the scientific perspective, but also because CMEs represent a hazard for human technology. We used a neural network to analyse transit times for 153 events with only two input parameters: initial velocity of the CME, $v$, and Central Meridian Distance, CMD, of its associated flare. We found that transit time dependence on $v$ is showing a typical drag-like pattern in the solar wind. The results show that the speed at which acceleration by drag changes to deceleration is $v\approx$500 km s$^{-1}$. Transit times are also found to be shorter for CMEs associated with flares on the western hemisphere than those originating on the eastern side of the Sun. We attribute this difference to the eastward deflection of CMEs on their path to 1 AU. The average error of the NN prediction in comparison to observations is $\approx$12 hours which is comparable to other studies on the same subject. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Forbush Decrease Prediction Based on the Remote Solar Observations

Authors: Mateja Dumbovic, Bojan Vrsnak, Jasa Calogovic

Abstract: We employ remote observations of coronal mass ejections (CMEs) and the associated solar flares to forecast the CME-related Forbush decreases, i.e., short-term depressions in the galactic cosmic-ray flux. The relationship between the Forbush effect at the Earth and remote observations of CMEs and associated solar flares is studied via a statistical analysis. Relationships between Forbush decrease m… ▽ More We employ remote observations of coronal mass ejections (CMEs) and the associated solar flares to forecast the CME-related Forbush decreases, i.e., short-term depressions in the galactic cosmic-ray flux. The relationship between the Forbush effect at the Earth and remote observations of CMEs and associated solar flares is studied via a statistical analysis. Relationships between Forbush decrease magnitude and several CME/flare parameters was found, namely the initial CME speed, apparent width, source position, associated solar-flare class and the effect of successive-CME occurrence. Based on the statistical analysis, remote solar observations are employed for a Forbush-decrease forecast. For that purpose, an empirical probabilistic model is constructed that uses selected remote solar observations of CME and associated solar flare as an input, and gives expected Forbush-decrease magnitude range as an output. The forecast method is evaluated using several verification measures, indicating that as the forecast tends to be more specific it is less reliable, which is its main drawback. However, the advantages of the method are that it provides early prediction, and that the input is not necessarily spacecraft-dependent. △ Less

Submitted 12 October, 2015; originally announced October 2015.

Strong coronal channelling and interplanetary evolution of a solar storm up to Earth and Mars

Authors: Christian Möstl, Tanja Rollett, Rudy A. Frahm, Ying D. Liu, David M. Long, Robin C. Colaninno, Martin A. Reiss, Manuela Temmer, Charles J. Farrugia, Arik Posner, Mateja Dumbović, Miho Janvier, Pascal Démoulin, Peter Boakes, Andy Devos, Emil Kraaikamp, Mona L. Mays, Bojan Vrsnak

Abstract: The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk… ▽ More The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk centre and, hence, a significant geomagnetic impact was forecasted. However, the CME is demonstrated to be channelled during eruption into a direction + 37+/-10 degree (longitude) away from its source region, leading only to minimal geomagnetic effects. In situ observations near Earth and Mars confirm the channelled CME motion, and are consistent with an ellipse shape of the CME-driven shock provided by the new Ellipse Evolution model, presented here. The results enhance our understanding of CME propagation and shape, which can help to improve space weather forecasts. △ Less

Submitted 10 June, 2015; v1 submitted 9 June, 2015; originally announced June 2015.

Comments: 6 figures, published in Nature Communications as open access

Journal ref: Nature Communications, 6:7135, 2015

Geoeffectiveness of Coronal Mass Ejections in the SOHO era

Authors: Mateja Dumbovic, Andy Devos, Bojan Vrsnak, Davor Sudar, Luciano Rodriguez, Domagoj Ruzdjak, Kristoffer Leer, Susanne Vennerstrom, Astrid Veronig

Abstract: The main objective of the study is to determine the probability distributions of the geomagnetic Dst index as a function of the coronal mass ejection (CME) and solar flare parameters for the purpose of establishing a probabilistic forecast tool for the geomagnetic storm intensity. Several CME and flare parameters as well as the effect of successive-CME occurrence in changing the probability for a… ▽ More The main objective of the study is to determine the probability distributions of the geomagnetic Dst index as a function of the coronal mass ejection (CME) and solar flare parameters for the purpose of establishing a probabilistic forecast tool for the geomagnetic storm intensity. Several CME and flare parameters as well as the effect of successive-CME occurrence in changing the probability for a certain range of Dst index values, were examined. The results confirm some of already known relationships between remotely-observed properties of solar eruptive events and geomagnetic storms, namely the importance of initial CME speed, apparent width, source position, and the associated solar flare class. In this paper we quantify these relationships in a form to be used for space weather forecasting in future. The results of the statistical study are employed to construct an empirical statistical model for predicting the probability of the geomagnetic storm intensity based on remote solar observations of CMEs and flares. △ Less

Submitted 13 October, 2014; originally announced October 2014.