-
$\mathcal{H}_2$ optimal model reduction of linear systems with multiple quadratic outputs
Authors:
Sean Reiter,
Igor Pontes Duff,
Ion Victor Gosea,
Serkan Gugercin
Abstract:
In this work, we consider the $\mathcal{H}_2$ optimal model reduction of dynamical systems that are linear in the state equation and up to quadratic nonlinearity in the output equation. As our primary theoretical contributions, we derive gradients of the squared $\mathcal{H}_2$ system error with respect to the reduced model quantities and, from the stationary points of these gradients, introduce G…
▽ More
In this work, we consider the $\mathcal{H}_2$ optimal model reduction of dynamical systems that are linear in the state equation and up to quadratic nonlinearity in the output equation. As our primary theoretical contributions, we derive gradients of the squared $\mathcal{H}_2$ system error with respect to the reduced model quantities and, from the stationary points of these gradients, introduce Gramian-based first-order necessary conditions for the $\mathcal{H}_2$ optimal approximation of a linear quadratic output (LQO) system. The resulting $\mathcal{H}_2$ optimality framework neatly generalizes the analogous Gramian-based optimality framework for purely linear systems. Computationally, we show how to enforce the necessary optimality conditions using Petrov-Galerkin projection; the corresponding projection matrices are obtained from a pair of Sylvester equations. Based on this result, we propose an iteratively corrected algorithm for the $\mathcal{H}_2$ model reduction of LQO systems, which we refer to as LQO-TSIA (linear quadratic output two-sided iteration algorithm). Numerical examples are included to illustrate the effectiveness of the proposed computational method against other existing approaches.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Stability-Certified Learning of Control Systems with Quadratic Nonlinearities
Authors:
Igor Pontes Duff,
Pawan Goyal,
Peter Benner
Abstract:
This work primarily focuses on an operator inference methodology aimed at constructing low-dimensional dynamical models based on a priori hypotheses about their structure, often informed by established physics or expert insights. Stability is a fundamental attribute of dynamical systems, yet it is not always assured in models derived through inference. Our main objective is to develop a method tha…
▽ More
This work primarily focuses on an operator inference methodology aimed at constructing low-dimensional dynamical models based on a priori hypotheses about their structure, often informed by established physics or expert insights. Stability is a fundamental attribute of dynamical systems, yet it is not always assured in models derived through inference. Our main objective is to develop a method that facilitates the inference of quadratic control dynamical systems with inherent stability guarantees. To this aim, we investigate the stability characteristics of control systems with energy-preserving nonlinearities, thereby identifying conditions under which such systems are bounded-input bounded-state stable. These insights are subsequently applied to the learning process, yielding inferred models that are inherently stable by design. The efficacy of our proposed framework is demonstrated through a couple of numerical examples.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Balanced Truncation of Descriptor Systems with a Quadratic Output
Authors:
Jennifer Przybilla,
Igor Pontes Duff,
Pawan Goyal,
Peter Benner
Abstract:
This work discusses model reduction for differential-algebraic systems with quadratic output equations. Under mild conditions, these systems can be transformed into a Weierstraß canonical form and, thus, be decoupled into differential equations and algebraic equations. The corresponding decoupled states are referred to as proper and improper states. Due to the quadratic function of the state as an…
▽ More
This work discusses model reduction for differential-algebraic systems with quadratic output equations. Under mild conditions, these systems can be transformed into a Weierstraß canonical form and, thus, be decoupled into differential equations and algebraic equations. The corresponding decoupled states are referred to as proper and improper states. Due to the quadratic function of the state as an output, the proper and improper states are coupled in the output equation, which imposes a challenge from a model reduction viewpoint. Kee** the coupling in mind, our goal in this work is to find important subspaces of the proper and improper states and to reduce the system accordingly. To that end, we first propose the system's matrices, the so-called Gramians, to characterize the system's dominant subspaces. We pay particular attention to the computation of the observability Gramians that take into account the nonlinear coupling between the proper and the improper states. We furthermore show that the proposed Gramians are related to certain kernel functions, which are used to identify important subspaces. This allows us to propose a reduction algorithm to obtain reduced-order systems by removing the subspaces that are difficult to reach, as well as, difficult to observe. Moreover, we quantify the error between the full-order and reduced-order models and demonstrate the proposed methodology using three numerical experiments.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Guaranteed Stable Quadratic Models and their applications in SINDy and Operator Inference
Authors:
Pawan Goyal,
Igor Pontes Duff,
Peter Benner
Abstract:
Scientific machine learning for inferring dynamical systems combines data-driven modeling, physics-based modeling, and empirical knowledge. It plays an essential role in engineering design and digital twinning. In this work, we primarily focus on an operator inference methodology that builds dynamical models, preferably in low-dimension, with a prior hypothesis on the model structure, often determ…
▽ More
Scientific machine learning for inferring dynamical systems combines data-driven modeling, physics-based modeling, and empirical knowledge. It plays an essential role in engineering design and digital twinning. In this work, we primarily focus on an operator inference methodology that builds dynamical models, preferably in low-dimension, with a prior hypothesis on the model structure, often determined by known physics or given by experts. Then, for inference, we aim to learn the operators of a model by setting up an appropriate optimization problem. One of the critical properties of dynamical systems is stability. However, this property is not guaranteed by the inferred models. In this work, we propose inference formulations to learn quadratic models, which are stable by design. Precisely, we discuss the parameterization of quadratic systems that are locally and globally stable. Moreover, for quadratic systems with no stable point yet bounded (e.g., chaotic Lorenz model), we discuss how to parameterize such bounded behaviors in the learning process. Using those parameterizations, we set up inference problems, which are then solved using a gradient-based optimization method. Furthermore, to avoid numerical derivatives and still learn continuous systems, we make use of an integral form of differential equations. We present several numerical examples, illustrating the preservation of stability and discussing its comparison with the existing state-of-the-art approach to infer operators. By means of numerical examples, we also demonstrate how the proposed methods are employed to discover governing equations and energy-preserving models.
△ Less
Submitted 7 January, 2024; v1 submitted 26 August, 2023;
originally announced August 2023.
-
Semi-active dam** optimization of vibrational systems using the reduced basis method
Authors:
Jennifer Przybilla,
Igor Pontes Duff,
Peter Benner
Abstract:
In this article, we consider vibrational systems with semi-active dam** that are described by a second-order model. In order to minimize the influence of external inputs to the system response, we are optimizing some dam** values. As minimization criterion, we evaluate the energy response, that is the $\cH_2$-norm of the corresponding transfer function of the system. Computing the energy respo…
▽ More
In this article, we consider vibrational systems with semi-active dam** that are described by a second-order model. In order to minimize the influence of external inputs to the system response, we are optimizing some dam** values. As minimization criterion, we evaluate the energy response, that is the $\cH_2$-norm of the corresponding transfer function of the system. Computing the energy response includes solving Lyapunov equations for different dam** parameters. Hence, the minimization process leads to high computational costs if the system is of large dimension. We present two techniques that reduce the optimization problem by applying the reduced basis method to the corresponding parametric Lyapunov equations. In the first method, we determine a reduced solution space on which the Lyapunov equations and hence the resulting energy response values are computed approximately in a reasonable time. The second method includes the reduced basis method in the minimization process. To evaluate the quality of the approximations, we introduce error estimators that evaluate the error in the controllability Gramians and the energy response. Finally, we illustrate the advantages of our methods by applying them to two different examples.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Inference of Continuous Linear Systems from Data with Guaranteed Stability
Authors:
Pawan Goyal,
Igor Pontes Duff,
Peter Benner
Abstract:
Machine-learning technologies for learning dynamical systems from data play an important role in engineering design. This research focuses on learning continuous linear models from data. Stability, a key feature of dynamic systems, is especially important in design tasks such as prediction and control. Thus, there is a need to develop methodologies that provide stability guarantees. To that end, w…
▽ More
Machine-learning technologies for learning dynamical systems from data play an important role in engineering design. This research focuses on learning continuous linear models from data. Stability, a key feature of dynamic systems, is especially important in design tasks such as prediction and control. Thus, there is a need to develop methodologies that provide stability guarantees. To that end, we leverage the parameterization of stable matrices proposed in [Gillis/Sharma, Automatica, 2017] to realize the desired models. Furthermore, to avoid the estimation of derivative information to learn continuous systems, we formulate the inference problem in an integral form. We also discuss a few extensions, including those related to control systems. Numerical experiments show that the combination of a stable matrix parameterization and an integral form of differential equations allows us to learn stable systems without requiring derivative information, which can be challenging to obtain in situations with noisy or limited data.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
Dominant Subspaces of High-Fidelity Nonlinear Structured Parametric Dynamical Systems and Model Reduction
Authors:
Pawan Goyal,
Igor Pontes Duff,
Peter Benner
Abstract:
In this work, we investigate a model order reduction scheme for high-fidelity nonlinear structured parametric dynamical systems. More specifically, we consider a class of nonlinear dynamical systems whose nonlinear terms are polynomial functions, and the linear part corresponds to a linear structured model, such as second-order, time-delay, or fractional-order systems. Our approach relies on the V…
▽ More
In this work, we investigate a model order reduction scheme for high-fidelity nonlinear structured parametric dynamical systems. More specifically, we consider a class of nonlinear dynamical systems whose nonlinear terms are polynomial functions, and the linear part corresponds to a linear structured model, such as second-order, time-delay, or fractional-order systems. Our approach relies on the Volterra series representation of these dynamical systems. Using this representation, we identify the kernels and, thus, the generalized multivariate transfer functions associated with these systems. Consequently, we present results allowing the construction of reduced-order models whose generalized transfer functions interpolate these of the original system at pre-defined frequency points. For efficient calculations, we also need the concept of a symmetric Kronecker product representation of a tensor and derive particular properties of them. Moreover, we propose an algorithm that extracts dominant subspaces from the prescribed interpolation conditions. This allows the construction of reduced-order models that preserve the structure. We also extend these results to parametric systems and a special case (delay in input/output). We demonstrate the efficiency of the proposed method by means of various numerical benchmarks.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
An Operator Inference Oriented Approach for Mechanical Systems
Authors:
Yevgeniya Filanova,
Igor Pontes Duff,
Pawan Goyal,
Peter Benner
Abstract:
Model-order reduction techniques allow the construction of low-dimensional surrogate models that can accelerate engineering design processes. Often, these techniques are intrusive, meaning that they require direct access to underlying high-fidelity models. Accessing these models is laborious or may not even be possible in some cases. Therefore, there is an interest in develo** non-intrusive mode…
▽ More
Model-order reduction techniques allow the construction of low-dimensional surrogate models that can accelerate engineering design processes. Often, these techniques are intrusive, meaning that they require direct access to underlying high-fidelity models. Accessing these models is laborious or may not even be possible in some cases. Therefore, there is an interest in develo** non-intrusive model reduction techniques to construct low-dimensional models directly from simulated or experimental data. In this work, we focus on a recent data-driven methodology, namely operator inference, that aims at inferring the reduced operators using only trajectories of high-fidelity models. We present an extension of operator inference for mechanical systems, preserving the second-order structure. We also study a particular case in which complete information about the external forces is available. In this formulation, the reduced operators having certain properties inspired by the original system matrices are enforced by adding constraints to the optimization problem. We illustrate the presented methodology using three numerical examples.
△ Less
Submitted 2 December, 2022; v1 submitted 14 October, 2022;
originally announced October 2022.
-
Model reduction for second-order systems with inhomogeneous initial conditions
Authors:
Jennifer Przybilla,
Igor Pontes Duff,
Peter Benner
Abstract:
In this paper, we consider the problem of finding surrogate models for large-scale second-order linear time-invariant systems with inhomogeneous initial conditions. For this class of systems, the superposition principle allows us to decompose the system behavior into three independent components. The first behavior corresponds to the transfer between the input and output having zero initial condit…
▽ More
In this paper, we consider the problem of finding surrogate models for large-scale second-order linear time-invariant systems with inhomogeneous initial conditions. For this class of systems, the superposition principle allows us to decompose the system behavior into three independent components. The first behavior corresponds to the transfer between the input and output having zero initial conditions. In contrast, the other two correspond to the transfer between the initial position and the initial velocity conditions having zero input, respectively. Based on this superposition of systems, our goal is to propose model reduction schemes allowing to preserve the second-order structure in the surrogate models. To this aim, we introduce tailored second-order Gramians for each system component and compute them numerically, solving Lyapunov equations. As a consequence, two methodologies are proposed. The first one consists in reducing each of the components independently using a suitable balanced truncation procedure. The sum of these reduced systems provides an approximation of the original system. This methodology allows flexibility on the order of the reduced-order model. The second proposed methodology consists in extracting the dominant subspaces from the sum of Gramians to build the projection matrices leading to a surrogate model. Additionally, we discuss error bounds for the overall output approximation. Finally, the proposed methods are illustrated by means of benchmark problems.
△ Less
Submitted 23 June, 2022; v1 submitted 14 June, 2022;
originally announced June 2022.
-
Model order reduction for bilinear systems with non-zero initial states -- different approaches with error bounds
Authors:
Martin Redmann,
Igor Pontes Duff
Abstract:
In this paper, we consider model order reduction for bilinear systems with non-zero initial conditions. We discuss choices of Gramians for both the homogeneous and the inhomogeneous parts of the system individually and prove how these Gramians characterize the respective dominant subspaces of each of the two subsystems. Proposing different, not necessarily structure preserving, reduced order metho…
▽ More
In this paper, we consider model order reduction for bilinear systems with non-zero initial conditions. We discuss choices of Gramians for both the homogeneous and the inhomogeneous parts of the system individually and prove how these Gramians characterize the respective dominant subspaces of each of the two subsystems. Proposing different, not necessarily structure preserving, reduced order methods for each subsystem, we establish several strategies to reduce the dimension of the full system. For all these approaches, error bounds are shown depending on the truncated Hankel singular values of the subsystems. Besides the error analysis, stability is discussed. In particular, a focus is on a new criterion for the homogeneous subsystem guaranteeing the existence of the associated Gramians and an asymptotically stable realization of the system.
△ Less
Submitted 18 May, 2022; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Full state approximation by Galerkin projection reduced order models for stochastic and bilinear systems
Authors:
Martin Redmann,
Igor Pontes Duff
Abstract:
In this paper, the problem of full state approximation by model reduction is studied for stochastic and bilinear systems. Our proposed approach relies on identifying the dominant subspaces based on the reachability Gramian of a system. Once the desired subspace is computed, the reduced order model is then obtained by a Galerkin projection. We prove that, in the stochastic case, this approach eithe…
▽ More
In this paper, the problem of full state approximation by model reduction is studied for stochastic and bilinear systems. Our proposed approach relies on identifying the dominant subspaces based on the reachability Gramian of a system. Once the desired subspace is computed, the reduced order model is then obtained by a Galerkin projection. We prove that, in the stochastic case, this approach either preserves mean square asymptotic stability or leads to reduced models whose minimal realization is mean square asymptotically stable. This stability preservation guarantees the existence of the reduced system reachability Gramian which is the basis for the full state error bounds that we derive. This error bound depends on the neglected eigenvalues of the reachability Gramian and hence shows that these values are a good indicator for the expected error in the dimension reduction procedure. Subsequently, we establish the stability preservation result and the error bound for a full state approximation to bilinear systems in a similar manner. These latter results are based on a recently proved link between stochastic and bilinear systems. We conclude the paper by numerical experiments using a benchmark problem. We compare this approach with balanced truncation and show that it performs well in reproducing the full state of the system. \end{abstract}
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Operator Inference and Physics-Informed Learning of Low-Dimensional Models for Incompressible Flows
Authors:
Peter Benner,
Pawan Goyal,
Jan Heiland,
Igor Pontes Duff
Abstract:
Reduced-order modeling has a long tradition in computational fluid dynamics. The ever-increasing significance of data for the synthesis of low-order models is well reflected in the recent successes of data-driven approaches such as Dynamic Mode Decomposition and Operator Inference. With this work, we suggest a new approach to learning structured low-order models for incompressible flow from data t…
▽ More
Reduced-order modeling has a long tradition in computational fluid dynamics. The ever-increasing significance of data for the synthesis of low-order models is well reflected in the recent successes of data-driven approaches such as Dynamic Mode Decomposition and Operator Inference. With this work, we suggest a new approach to learning structured low-order models for incompressible flow from data that can be used for engineering studies such as control, optimization, and simulation. To that end, we utilize the intrinsic structure of the Navier-Stokes equations for incompressible flows and show that learning dynamics of the velocity and pressure can be decoupled, thus leading to an efficient operator inference approach for learning the underlying dynamics of incompressible flows. Furthermore, we show the operator inference performance in learning low-order models using two benchmark problems and compare with an intrusive method, namely proper orthogonal decomposition, and other data-driven approaches.
△ Less
Submitted 7 December, 2020; v1 submitted 13 October, 2020;
originally announced October 2020.
-
Toward fitting structured nonlinear systems by means of dynamic mode decomposition
Authors:
Ion Victor Gosea,
Igor Pontes Duff
Abstract:
The dynamic mode decomposition (DMD) is a data-driven method used for identifying the dynamics of complex nonlinear systems. It extracts important characteristics of the underlying dynamics using measured time-domain data produced either by means of experiments or by numerical simulations. In the original methodology, the measurements are assumed to be approximately related by a linear operator. H…
▽ More
The dynamic mode decomposition (DMD) is a data-driven method used for identifying the dynamics of complex nonlinear systems. It extracts important characteristics of the underlying dynamics using measured time-domain data produced either by means of experiments or by numerical simulations. In the original methodology, the measurements are assumed to be approximately related by a linear operator. Hence, a linear discrete-time system is fitted to the given data. However, often, nonlinear systems modeling physical phenomena have a particular known structure. In this contribution, we propose an identification and reduction method based on the classical DMD approach allowing to fit a structured nonlinear system to the measured data. We mainly focus on two types of nonlinearities: bilinear and quadratic-bilinear. By enforcing this additional structure, more insight into extracting the nonlinear behavior of the original process is gained. Finally, we demonstrate the proposed methodology for different examples, such as the Burgers' equation and the coupled van der Pol oscillators.
△ Less
Submitted 22 November, 2020; v1 submitted 13 March, 2020;
originally announced March 2020.
-
Identification of Dominant Subspaces for Linear Structured Parametric Systems and Model Reduction
Authors:
Peter Benner,
Pawan Goyal,
Igor Pontes Duff
Abstract:
In this paper, we discuss a novel model reduction framework for generalized linear systems. The transfer functions of these systems are assumed to have a special structure, e.g., coming from second-order linear systems and time-delay systems, and they may also have parameter dependencies. Firstly, we investigate the connection between classic interpolation-based model reduction methods with the re…
▽ More
In this paper, we discuss a novel model reduction framework for generalized linear systems. The transfer functions of these systems are assumed to have a special structure, e.g., coming from second-order linear systems and time-delay systems, and they may also have parameter dependencies. Firstly, we investigate the connection between classic interpolation-based model reduction methods with the reachability and observability subspaces of linear structured parametric systems. We show that if enough interpolation points are taken, the projection matrices of interpolation-based model reduction encode these subspaces. As a result, we are able to identify the dominant reachable and observable subspaces of the underlying system. Based on this, we propose a new model reduction algorithm combining these features leading to reduced-order systems. Furthermore, we pay special attention to computational aspects of the approach and discuss its applicability to a large-scale setting. We illustrate the efficiency of the proposed approach with several numerical large-scale benchmark examples.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Data-Driven Identification of Rayleigh-Damped Second-Order Systems
Authors:
Igor Pontes Duff,
Pawan Goyal,
Peter Benner
Abstract:
In this paper, we present a data-driven approach to identify second-order systems, having internal Rayleigh dam**. This means that the dam** matrix is given as a linear combination of the mass and stiffness matrices. These systems typically appear when performing various engineering studies, e.g., vibrational and structural analysis. In an experimental setup, the frequency response of a system…
▽ More
In this paper, we present a data-driven approach to identify second-order systems, having internal Rayleigh dam**. This means that the dam** matrix is given as a linear combination of the mass and stiffness matrices. These systems typically appear when performing various engineering studies, e.g., vibrational and structural analysis. In an experimental setup, the frequency response of a system can be measured via various approaches, for instance, by measuring the vibrations using an accelerometer. As a consequence, given frequency samples, the identification of the underlying system relies on rational approximation. To that aim, we propose an identification of the corresponding second-order system, extending the Loewner framework for this class of systems. The efficiency of the proposed method is demonstrated by means of various numerical benchmarks.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
Gramians, Energy Functionals and Balanced Truncation for Linear Dynamical Systems with Quadratic Outputs
Authors:
Peter Benner,
Pawan Goyal,
Igor Pontes Duff
Abstract:
Model order reduction is a technique that is used to construct low-order approximations of large-scale dynamical systems. In this paper, we investigate a balancing based model order reduction method for dynamical systems with a linear dynamical equation and a quadratic output function. To this aim, we propose a new algebraic observability Gramian for the system based on Hilbert space adjoint theor…
▽ More
Model order reduction is a technique that is used to construct low-order approximations of large-scale dynamical systems. In this paper, we investigate a balancing based model order reduction method for dynamical systems with a linear dynamical equation and a quadratic output function. To this aim, we propose a new algebraic observability Gramian for the system based on Hilbert space adjoint theory. We then show the proposed Gramians satisfy a particular type of generalized Lyapunov equations and we investigate their connections to energy functionals, namely, the controllability and observability. This allows us to find the states that are hard to control and hard to observe via an appropriate balancing transformation. Truncation of such states yields reduced-order systems. Finally, based on $\mathcal H_2$ energy considerations, we, furthermore, derive error bounds, depending on the neglected singular values. The efficiency of the proposed method is demonstrated by means of two semi-discretized partial differential equations and is compared with the existing model reduction techniques in the literature.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Numerical computation and new output bounds for time-limited balanced truncation of discrete-time systems
Authors:
Igor Pontes Duff,
Patrick Kürschner
Abstract:
In this paper, balancing based model order reduction (MOR) for large-scale linear discrete-time time-invariant systems in prescribed finite time intervals is studied. The first main topic is the development of error bounds regarding the approximated output vector within the time limits. The influence of different components in the established bounds will be highlighted. After that, the second part…
▽ More
In this paper, balancing based model order reduction (MOR) for large-scale linear discrete-time time-invariant systems in prescribed finite time intervals is studied. The first main topic is the development of error bounds regarding the approximated output vector within the time limits. The influence of different components in the established bounds will be highlighted. After that, the second part of the article proposes strategies that enable an efficient numerical execution of time-limited balanced truncation for large-scale systems. Numerical experiments illustrate the performance of the proposed techniques.
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
New Gramians for Linear Switched Systems: Reachability, Observability, and Model Reduction
Authors:
Igor Pontes Duff,
Sara Grundel,
Peter Benner
Abstract:
In this paper, we propose new algebraic Gramians for continuous-time linear switched systems, which satisfy generalized Lyapunov equations. The main contribution of this work is twofold. First, we show that the ranges of those Gramians encode the reachability and observability spaces of a linear switched system. As a consequence, a simple Gramian-based criterion for reachability and observability…
▽ More
In this paper, we propose new algebraic Gramians for continuous-time linear switched systems, which satisfy generalized Lyapunov equations. The main contribution of this work is twofold. First, we show that the ranges of those Gramians encode the reachability and observability spaces of a linear switched system. As a consequence, a simple Gramian-based criterion for reachability and observability is established. Second, a balancing-based model order reduction technique is proposed and, under some sufficient conditions, stability preservation and an error bound are shown. Finally, the efficiency of the proposed method is illustrated by means of numerical examples.
△ Less
Submitted 1 June, 2018;
originally announced June 2018.
-
Optimal $\mathcal{H}_{2}$ model approximation based on multiple input/output delays systems
Authors:
Igor Pontes Duff,
Charles Poussot-Vassal,
Cédric Seren
Abstract:
In this paper, the $\mathcal{H}_{2}$ optimal approximation of a $n_{y}\times{n_{u}}$ transfer function $\mathbf{G}(s)$ by a finite dimensional system $\hat{\mathbf{H}}_{d}(s)$ including input/output delays, is addressed. The underlying $\mathcal{H}_{2}$ optimality conditions of the approximation problem are firstly derived and established in the case of a poles/residues decomposition. These latter…
▽ More
In this paper, the $\mathcal{H}_{2}$ optimal approximation of a $n_{y}\times{n_{u}}$ transfer function $\mathbf{G}(s)$ by a finite dimensional system $\hat{\mathbf{H}}_{d}(s)$ including input/output delays, is addressed. The underlying $\mathcal{H}_{2}$ optimality conditions of the approximation problem are firstly derived and established in the case of a poles/residues decomposition. These latter form an extension of the tangential interpolatory conditions, presented in~\cite{gugercin2008h_2,dooren2007} for the delay-free case, which is the main contribution of this paper. Secondly, a two stage algorithm is proposed in order to practically obtain such an approximation.
△ Less
Submitted 16 November, 2015;
originally announced November 2015.
-
Realization independent single time-delay dynamical model interpolation and $\mathcal{H}_2$-optimal approximation
Authors:
I. Pontes Duff,
C. Poussot-Vassal,
C. Seren
Abstract:
In this paper, the realization-free model approximation problem, as stated in \cite{mayo2007framework,beattie2012realization}, is revisited in the case where the interpolating model might be time-delay dependent. To this aim, the Loewner framework, initially settled for delay-free realization, is firstly generalized to the single delay case. Secondly, the (infinite) model approximation…
▽ More
In this paper, the realization-free model approximation problem, as stated in \cite{mayo2007framework,beattie2012realization}, is revisited in the case where the interpolating model might be time-delay dependent. To this aim, the Loewner framework, initially settled for delay-free realization, is firstly generalized to the single delay case. Secondly, the (infinite) model approximation $\mathcal{H}_2$ optimality conditions are established through the use of the Lambert functions. Finally, a numerically effective iterative scheme, named \textbf{dTF-IRKA}, similar to the \textbf{TF-IRKA} \cite{beattie2012realization}, is proposed to reach a part of the aforementioned optimality conditions. The proposed method validity and interest are assessed on different numerical examples.
△ Less
Submitted 24 April, 2015;
originally announced April 2015.
