-
B-BOP, the SPICA Imaging Polarimeter
Authors:
Vincent Revéret,
Marc Sauvage,
Obaïd Adami,
Abdelkader Aliane,
Michel Berthé,
Sophie Bounissou,
Xavier de la Broïse,
Marcos Chimeno,
Amala Demonti,
Jacques Delabrouille,
Cyrille Delisle,
Eric Doumayrou,
Lionel Duband,
Didier Dubreuil,
Laurent Dussopt,
Pierre-Antoine Frugier,
Camille Gennet,
Olivier Gevin,
Valérie Goudon,
Hacile Kaya,
Benoît Marquet,
Jérôme Martignac,
Sylvain Martin,
Paco Najarro,
Xavier-François Navick
, et al. (6 additional authors not shown)
Abstract:
We present the B-BOP instrument, a polarimetric camera on board the future ESA-JAXA SPICA far-infrared space observatory. B-BOP will allow the study of the magnetic field in various astrophysical environments thanks to its unprecedented ability to measure the linear polarization of the submillimeter light. The maps produced by B-BOP will contain not only information on total power, but also on the…
▽ More
We present the B-BOP instrument, a polarimetric camera on board the future ESA-JAXA SPICA far-infrared space observatory. B-BOP will allow the study of the magnetic field in various astrophysical environments thanks to its unprecedented ability to measure the linear polarization of the submillimeter light. The maps produced by B-BOP will contain not only information on total power, but also on the degree and the angle of polarization, simultaneously in three spectral bands (70, 200 and 350 microns). The B-BOP detectors are ultra-sensitive silicon bolometers that are intrinsically sensitive to polarization. Their NEP is close to 10E-18 W/sqrt(Hz). We will present the optical and thermal architectures of the instrument, we will detail the bolometer design and we will show the expected performances of the instrument based on preliminary lab work.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS
Authors:
Ph. André,
V. Revéret,
V. Könyves,
D. Arzoumanian,
J. Tigé,
P. Gallais,
H. Roussel,
J. Le Pennec,
L. Rodriguez,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. Delisle,
F. Visticot,
L. Dumaye,
C. De Breuck,
Y. Shimajiri,
F. Motte,
S. Bontemps,
M. Hennemann,
A. Zavagno,
D. Russeil,
N. Schneider
, et al. (6 additional authors not shown)
Abstract:
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by superson…
▽ More
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation.
We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc.
Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
The Mid-Infrared Instrument for the James Webb Space Telescope: IV. The Low Resolution Spectrometer
Authors:
S. Kendrew,
S. Scheithauer,
P. Bouchet,
J. Amiaux,
R. Azzolini,
J. Bouwman,
C. Chen,
D. Dubreuil,
S. Fischer,
A. Glasse,
T. Greene,
P. -O. Lagage,
F. Lahuis,
S. Ronayette,
D. Wright,
G. S. Wright
Abstract:
The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the de…
▽ More
The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the delivered image quality, dispersion, and resolving power, as well as spectrophotometric performance, flatfield accuracy and the effects of fringing. We describe the operational concept of the slitless mode, which is optimally suited to transit spectroscopy of exoplanet atmospheres. The LRS mode of the MIRI was found to perform consistently with its requirements and goals.
△ Less
Submitted 9 December, 2015;
originally announced December 2015.
-
The Mid-Infrared Instrument for the James Webb Space Telescope, III: MIRIM, The MIRI Imager
Authors:
P. Bouchet,
M. Garcia-Marin,
P. -O. Lagage,
J. Amiaux,
J. -L. Augueres,
E. Bauwens,
J. A. D. L. Blommaert,
C. H. Chen,
O. H. Detre,
D. Dicken,
D. Dubreuil,
Ph. Galdemard,
R. Gastaud,
A. Glasse,
K. D. Gordon,
F. Gougnaud,
P. Guillard,
K. Justtanont,
O. Krause,
D. Leboeuf,
Y. Longval,
L. Martin,
E. Mazy,
V. Moreau,
G. Olofsson
, et al. (12 additional authors not shown)
Abstract:
In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and m…
▽ More
In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and mechanical design. We show that the test data, as measured during the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton Laboratory, and at the NASA Goddard Space Flight Center, indicate that the instrument complies with its design requirements and goals. We also discuss the operational requirements (multiple dithers and exposures) needed for optimal scientific utilization of the MIRIM.
△ Less
Submitted 11 August, 2015;
originally announced August 2015.
-
The Mid-Infrared Instrument for the James Webb Space Telescope, V: Predicted Performance of the MIRI Coronagraphs
Authors:
A. Boccaletti,
P. -O. Lagage,
P. Baudoz,
C. Beichman,
P. Bouchet,
C. Cavarroc,
D. Dubreuil,
Alistair Glasse,
A. M. Glauser,
D. C. Hines,
C. -P. Lajoie,
J. Lebreton,
M. D. Perrin,
L. Pueyo,
J. M. Reess,
G. H. Rieke,
S. Ronayette,
D. Rouan,
R. Soummer,
G. S. Wright
Abstract:
The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around…
▽ More
The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around post-main-sequence stars, the near-nuclear environments in active galaxies, and the host galaxies of distant quasars. This paper describes the coronagraphic observing modes of MIRI, as well as performance estimates based on measurements of the MIRI flight model during cryo-vacuum testing. A brief outline of coronagraphic operations is also provided. Finally, simulated MIRI coronagraphic observations of a few astronomical targets are presented for illustration.
△ Less
Submitted 10 August, 2015;
originally announced August 2015.
-
The ArTéMiS wide-field submillimeter camera: preliminary on-sky performances at 350 microns
Authors:
Vincent Reveret,
Philippe André,
Jean Le Pennec,
Michel Talvard,
Patrick Agnèse,
Agnès Arnaud,
Laurent Clerc,
Carlos de Breuck,
Jean-Charles Cigna,
Cyrille Delisle,
Eric Doumayrou,
Lionel Duband,
Didier Dubreuil,
Luc Dumaye,
Eric Ercolani,
Pascal Gallais,
Elodie Groult,
Thierry Jourdan,
Bernadette Leriche,
Bruno Maffei,
Michel Lortholary,
Jérôme Martignac,
Wilfried Rabaud,
Johan Relland,
Louis Rodriguez
, et al. (2 additional authors not shown)
Abstract:
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and Un…
▽ More
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and University of Manchester (UK) in collaboration with ESO. We introduce the mechanical and optical design, as well as the cryogenics and electronics of the ArTeMiS camera. ArTeMiS detectors are similar to the ones developed for the Herschel PACS photometer but they are adapted to the high optical load encountered at APEX site. Ultimately, ArTeMiS will contain 4 sub-arrays at 200 microns and 2x8 sub-arrays at 350 and 450 microns. We show preliminary lab measurements like the responsivity of the instrument to hot and cold loads illumination and NEP calculation. Details on the on-sky commissioning runs made in 2013 and 2014 at APEX are shown. We used planets (Mars, Saturn, Uranus) to determine the flat-field and to get the flux calibration. A pointing model was established in the first days of the runs. The average relative pointing accuracy is 3 arcsec. The beam at 350 microns has been estimated to be 8.5 arcsec, which is in good agreement with the beam of the 12 m APEX dish. Several observing modes have been tested, like On-The-Fly for beam-maps or large maps, spirals or raster of spirals for compact sources. With this preliminary version of ArTeMiS, we concluded that the map** speed is already more than 5 times better than the previous 350 microns instrument at APEX. The median NEFD at 350 microns is 600 mJy.s1/2, with best values at 300 mJy.s1/2. The complete instrument with 5760 pixels and optimized settings will be installed during the first half of 2015.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Resolving the Vela C ridge with P-ArTeMiS and Herschel
Authors:
T. Hill,
Ph. Andre,
D. Arzoumanian,
F. Motte,
V. Minier,
A. Menshchikov,
P. Didelon,
M. Hennemann,
V. Konyves,
Q. Nguyen-Luong,
P. Palmeirim,
N. Peretto,
N. Schneider,
S. Bontemps,
F. Louvet,
D. Elia,
T. Giannini,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
M. Lortholary
, et al. (3 additional authors not shown)
Abstract:
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the…
▽ More
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArTéMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
SPICES: Spectro-Polarimetric Imaging and Characterization of Exoplanetary Systems
Authors:
Anthony Boccaletti,
Jean Schneider,
Wes Traub,
Pierre-Olivier Lagage,
Daphne Stam,
Raffaele Gratton,
John Trauger,
Kerri Cahoy,
Frans Snik,
Pierre Baudoz,
Raphael Galicher,
Jean-Michel Reess,
Dimitri Mawet,
Jean-Charles Augereau,
Jennifer Patience,
Marc Kuchner,
Mark Wyatt,
Eric Pantin,
Anne-Lise Maire,
Christophe Verinaud,
Samuel Ronayette,
Didier Dubreuil,
Michiel Min,
Michiel Rodenhuis,
Dino Mesa
, et al. (6 additional authors not shown)
Abstract:
SPICES (Spectro-Polarimetric Imaging and Characterization of Exoplanetary Systems) is a five-year M-class mission proposed to ESA Cosmic Vision. Its purpose is to image and characterize long-period extrasolar planets and circumstellar disks in the visible (450 - 900 nm) at a spectral resolution of about 40 using both spectroscopy and polarimetry. By 2020/22, present and near-term instruments will…
▽ More
SPICES (Spectro-Polarimetric Imaging and Characterization of Exoplanetary Systems) is a five-year M-class mission proposed to ESA Cosmic Vision. Its purpose is to image and characterize long-period extrasolar planets and circumstellar disks in the visible (450 - 900 nm) at a spectral resolution of about 40 using both spectroscopy and polarimetry. By 2020/22, present and near-term instruments will have found several tens of planets that SPICES will be able to observe and study in detail. Equipped with a 1.5 m telescope, SPICES can preferentially access exoplanets located at several AUs (0.5-10 AU) from nearby stars ($<$25 pc) with masses ranging from a few Jupiter masses to Super Earths ($\sim$2 Earth radii, $\sim$10 M$_{\oplus}$) as well as circumstellar disks as faint as a few times the zodiacal light in the Solar System.
△ Less
Submitted 2 March, 2012;
originally announced March 2012.
-
Optical performance of the JWST MIRI flight model: characterization of the point spread function at high-resolution
Authors:
P. Guillard,
T. Rodet,
S. Ronayette,
J. Amiaux,
A. Abergel,
V. Moreau,
J. L. Augueres,
A. Bensalem,
T. Orduna,
C. Nehmé,
A. R. Belu,
E. Pantin,
P. O Lagage,
Y. Longval,
A. C. H. Glasse,
P. Bouchet,
C. Cavarroc,
D. Dubreuil,
S. Kendrew
Abstract:
The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper…
▽ More
The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper reports on the point spread function (PSF) measurements at 5.6 microns, the shortest operating wavelength for imaging. At 5.6 microns the PSF is not Nyquist-sampled, so we use am original technique that combines a microscanning measurement strategy with a deconvolution algorithm to obtain an over-resolved MIRIM PSF. The microscanning consists in a sub-pixel scan of a point source on the focal plane. A data inversion method is used to reconstruct PSF images that are over-resolved by a factor of 7 compared to the native resolution of MIRI. We show that the FWHM of the high-resolution PSFs were 5-10% wider than that obtained with Zemax simulations. The main cause was identified as an out-of-specification tilt of the M4 mirror. After correction, two additional test campaigns were carried out, and we show that the shape of the PSF is conform to expectations. The FWHM of the PSFs are 0.18-0.20 arcsec, in agreement with simulations. 56.1-59.2% of the total encircled energy (normalized to a 5 arcsec radius) is contained within the first dark Airy ring, over the whole field of view. At longer wavelengths (7.7-25.5 microns), this percentage is 57-68%. MIRIM is thus compliant with the optical quality requirements. This characterization of the MIRIM PSF, as well as the deconvolution method presented here, are of particular importance, not only for the verification of the optical quality and the MIRI calibration, but also for scientific applications.
△ Less
Submitted 29 June, 2010;
originally announced June 2010.
-
Evidence of triggered star formation in G327.3-0.6. Dust-continuum map** of an infrared dark cloud with P-ArTéMiS
Authors:
V. Minier,
Ph. André,
P. Bergman,
F. Motte,
F. Wyrowski,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
G. Hamon,
P. -O. Lagage,
M. Lortholary,
J. Martignac,
V. Revéret,
H. Roussel,
M. Talvard,
G. Willmann,
H. Olofsson
Abstract:
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in…
▽ More
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArTéMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArTéMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.
-
First 450-micron dust continuum map** of the massive star-forming region NGC 3576 with the P-ArTeMiS bolometer camera
Authors:
P. André,
V. Minier,
P. Gallais,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. De Breuck,
G. Hamon,
N. Schneider,
S. Bontemps,
P. O. Lagage,
E. Pantin,
H. Roussel,
M. Miller,
C. R. Purcell,
T. Hill,
J. Stutzki
Abstract:
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron…
▽ More
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage.
△ Less
Submitted 23 September, 2008;
originally announced September 2008.
