-
Spectral variations within solar flare ribbons
Authors:
A. G. M. Pietrow,
M. K. Druett,
V. Singh
Abstract:
Solar flare ribbons are intense brightenings of principally chromospheric material that are responsible for a large fraction of the chromospheric emission in solar and stellar flares. We present an on-disc observation of flare ribbon substructures in an X9.3-class flare observed by the Swedish 1-m Solar Telescope. We identify categories of ribbon substructures seen in the Ca II 8542 Å, H$α$, and C…
▽ More
Solar flare ribbons are intense brightenings of principally chromospheric material that are responsible for a large fraction of the chromospheric emission in solar and stellar flares. We present an on-disc observation of flare ribbon substructures in an X9.3-class flare observed by the Swedish 1-m Solar Telescope. We identify categories of ribbon substructures seen in the Ca II 8542 Å, H$α$, and Ca II K lines, focusing on their spatial locations and their (spectro-)polarimetric properties. Color Collapsed Plotting (COCOPLOT) software is used to assist in identifying areas of interest. We present five categories of spectral profiles within the general body of the flare ribbon: (1) Extremely broadened spectral line profiles, where the standard Fabry-Perot interferometer wavelength windows ($\approx 70$ km s$^{-1}$) are insufficiently wide to allow for a complete analysis of the dynamics and atmospheric conditions. The mechanisms causing this degree of this broadening are not yet clearly understood. (2) Long-lived, dense kernels that manifest as more saturated chromospheric line profiles with lower signal in both Stokes parameters. They are interpreted as footpoints of bunched magnetic field loops, whose chromospheric lines form at greater heights than the nearby areas. (3) Doppler-shifted leading edges of the flare ribbon in regions that transiently display lower Stokes signals due to the emission dominating at greater heights in the atmosphere. (4) Condensed coronal rain overlap** the flare ribbons in the line of sight, producing exceptionally high Doppler shifts near the footpoints...
△ Less
Submitted 17 May, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
Chromospheric evaporation by particle beams in multi-dimensional flare models
Authors:
Malcolm Keith Druett,
Wenzhi Ruan,
Rony Keppens
Abstract:
Evaporation of chromospheric plasma by particle beams has been a standard feature of models of solar flares for many decades, supported both by observations of strong hard X-ray bremsstrahlung signals, and detailed 1D hydrodynamic radiative transfer models with near-relativistic electron beams included. However in multi-dimensional models, evaporation, if included, has only been driven by heat con…
▽ More
Evaporation of chromospheric plasma by particle beams has been a standard feature of models of solar flares for many decades, supported both by observations of strong hard X-ray bremsstrahlung signals, and detailed 1D hydrodynamic radiative transfer models with near-relativistic electron beams included. However in multi-dimensional models, evaporation, if included, has only been driven by heat conduction and by the impact and reflection of fast plasma outflows on the lower atmosphere. Here we present the first multi-dimensional flare simulation featuring evaporation driven by energetic electrons. We use a recent magnetohydrodynamic model that includes beam physics, but decrease the initial anomalous resistivity to create a gentler precursor phase, and improve on the dynamic resistivity treatment that determines where beams are injected. Beam-driven evaporation is achieved. The relevant factors are thermal conduction and electron beams, with the beam electrons more than doubling the kinetic energy flux, and adding 50% to the upward mass from the chromosphere. These findings finally pave the way for integrating detailed 1D flare modelling within a self-consistent 2D and 3D context. The beam fluxes from these self-consistent models can be used to directly compare multi-dimensional results with those from the externally injected beam fluxes of 1D models, as well as understand further evaporation-driven phenomena relating to beams of particles.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
A comparative study of two X2.2 and X9.3 solar flares observed with HARPS-N: Reconciling Sun-as-a-star spectroscopy and high-spatial resolution solar observations in the context of the solar-stellar connection
Authors:
A. G. M. Pietrow,
M. Cretignier,
M. K. Druett,
J. D. Alvarado-Gómez,
S. J. Hofmeister,
M. Verma,
R. Kamlah,
M. Baratella,
E. M. Amazo-Gomez,
I. Kontogiannis,
E. Dineva,
A. Warmuth,
C. Denker,
K. Poppenhaeger,
O. Andriienko,
X. Dumusque,
M. G. Löfdahl
Abstract:
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a step** stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-inte…
▽ More
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a step** stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-integrated spectral behaviors of a confined X2.2 solar flare and its eruptive X9.3 successor as measured by HARPS-N. The behavior of multiple photospheric and chromospheric spectral lines are investigated by means of activity indices and contrast profiles. A number of different photospheric lines were also investigated by means of equivalent widths, and radial velocity measures, which are then related to physical processes directly observed in high-resolution observations made with the Swedish 1-meter Solar Telescope and SDO Our findings suggest a relationship between the evolving shapes of contrast profile time and the flare locations, which assists in constraining flare locations in disk-integrated observations. In addition, an upward bias was found in flare statistics based on activity indices derived from the Ca II H & K lines. In this case, much smaller flares cause a similar increase in the activity index as that produced by larger flares. H$α$-based activity indices do not show this bias and are therefore less susceptible to activity jitter. Sodium line profiles show a strongly asymmetric response during flare activity, which is best captured with a newly defined asymmetrical sodium activity index. A strong flare response was detected in Mn I line profiles, which is unexpected and calls for further exploration. Intensity increases in H$α$, H$β$, and certain spectral windows of AIA before the flare onset suggest their potential use as short-term flare predictors.
△ Less
Submitted 1 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
The formation and heating of chromospheric fibrils in a radiation-MHD simulation
Authors:
M. K. Druett,
J. Leenaarts,
M. Carlsson,
M. Szydlarski
Abstract:
Aims: We examine the movements of mass elements within dense fibrils using passive tracer particles (corks) in order to understand fibril creation and destruction processes.
Methods: Simulated fibrils were selected at times when they were visible in an H$α$ image proxy. The corks were selected within fibril H$α$ formation regions. From this set, a cork was selected, and the field line passing th…
▽ More
Aims: We examine the movements of mass elements within dense fibrils using passive tracer particles (corks) in order to understand fibril creation and destruction processes.
Methods: Simulated fibrils were selected at times when they were visible in an H$α$ image proxy. The corks were selected within fibril H$α$ formation regions. From this set, a cork was selected, and the field line passing through it was constructed. Other fibrilar corks close to this fieldline were also selected. Pathlines were constructed, revealing the locations of the mass elements forward and backward in time. The forces acting on these mass elements were analysed.
Results: The main process of fibrilar loading in the simulation is different to the mass loading scenario in which waves steepen into shocks and push material upwards along the fieldlines from near their footpoints. Twisted low lying fieldlines were destabilised and then they untwisted, lifting the material trapped above their apexes via the Lorentz force. Subsequently, the majority of the mass drained down the fieldlines towards one or both footpoints under gravity. Material with large horizontal velocities could also elevated in rising fieldlines, creating somewhat parabolic motions, but material was not generally moving upward along a stationary magnetic fieldline during loading.
Conclusions: The processes observed in the simulation are plausible additional scenarios. Criteria for observing such events are described. It is desirable that our simulations can also form more densely-packed fibrils from material fed from the base of field footpoints. Experimental parameters required to achieve this are discussed.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
COCOPLOT: COlor COllapsed PLOTting software : Using color to view 3D data as a 2D image
Authors:
Malcolm K. Druett,
Alexander G. M. Pietrow,
Gregal J. M. Vissers,
Carolina Robustini,
Flavio Calvo
Abstract:
Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-l…
▽ More
Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-look and context image software, to convey spectral profile or time evolution from all the spatial pixels ($x,y$) in a 3D [$n_x,n_y,n_λ$] or [$n_x,n_y,n_t$] data cube as a single image, using color. This can avoid the need to scan through many wavelengths, creating difference and composite images when searching for signals satisfying multiple criteria. Filters are generated for the red, green, and blue channels by selecting values of interest to highlight in each channel, and their weightings. These filters are combined with the data cube over the third dimension axis to produce an $n_x \times n_y \times 3$ cube displayed as one true color image. Some use cases are presented for data from the Swedish 1-m Solar Telescope (SST) and IRIS, including H$α$ solar flare data, a comparison with $k$-means clustering for identifying asymmetries in the Ca II K line and off-limb coronal rain in IRIS C II slit-jaw images. These illustrate identification by color alone using COCOPLOT of locations including line wing or central enhancement, broadening, wing absorption, and sites with intermittent flows or time-persistent features. COCOPLOT is publicly available in both IDL and Python.
△ Less
Submitted 31 July, 2022; v1 submitted 21 November, 2021;
originally announced November 2021.
