-
Two-dimensional photonic crystal cavities in ZnSe quantum well structures
Authors:
Siqi Qiao,
Nils von den Driesch,
Xi Chen,
Stefan Trellenkamp,
Florian Lentz,
Christoph Krause,
Benjamin Bennemann,
Thorsten Brazda,
James M. LeBeau,
Alexander Pawlis
Abstract:
ZnSe and related materials like ZnMgSe and ZnCdSe are promising II-VI host materials for optically mediated quantum information technology such as single photon sources or spin qubits. Integrating these heterostructures into photonic crystal (PC) cavities enables further improvements, for example realizing Purcell-enhanced single photon sources with increased quantum efficiency. Here we report on…
▽ More
ZnSe and related materials like ZnMgSe and ZnCdSe are promising II-VI host materials for optically mediated quantum information technology such as single photon sources or spin qubits. Integrating these heterostructures into photonic crystal (PC) cavities enables further improvements, for example realizing Purcell-enhanced single photon sources with increased quantum efficiency. Here we report on the successful implementation of two-dimensional (2D) PC cavities in strained ZnSe quantum wells (QW) on top of a novel AlAs supporting layer. This approach overcomes typical obstacles associated with PC membrane fabrication in strained materials, such as cracks and strain relaxation in the corresponding devices. We demonstrate the attainment of the required mechanical stability in our PC devices, complete strain retainment and effective vertical optical confinement. Structural analysis of our PC cavities reveals excellent etching anisotropy. Additionally, elemental map** in a scanning transmission electron microscope confirms the transformation of AlAs into AlOx by post-growth wet oxidation and reveals partial oxidation of ZnMgSe at the etched sidewalls in the PC. This knowledge is utilized to tailor FDTD simulations and to extract the ZnMgSe dispersion relation with small oxygen content. Optical characterization of the PC cavities with cross-polarized resonance scattering spectroscopy verifies the presence of cavity modes. The excellent agreement between simulation and measured cavity mode energies demonstrates wide tunability of the PC cavity and proves the pertinence of our model. This implementation of 2D PC cavities in the ZnSe material system establishes a solid foundation for future developments of ZnSe quantum devices.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Cavity-enhanced single photon emission from a single impurity-bound exciton
Authors:
Yuxi Jiang,
Robert M. Pettit,
Nils von den Driesch,
Alexander Pawlis,
Edo Waks
Abstract:
Impurity-bound excitons in ZnSe quantum wells are bright single photon emitters--a crucial element in photonics-based quantum technology. But to achieve the efficiencies required for practical applications, these emitters must be integrated into optical cavities that enhance their radiative properties and far-field emission pattern. In this work, we demonstrate cavity-enhanced emission from a sing…
▽ More
Impurity-bound excitons in ZnSe quantum wells are bright single photon emitters--a crucial element in photonics-based quantum technology. But to achieve the efficiencies required for practical applications, these emitters must be integrated into optical cavities that enhance their radiative properties and far-field emission pattern. In this work, we demonstrate cavity-enhanced emission from a single impurity-bound exciton in a ZnSe quantum well. We utilize a bullseye cavity structure optimized to feature a small mode volume and a nearly Gaussian far-field transverse mode that can efficiently couple to an optical fiber. The fabricated device displays emission that is more than an order of magnitude brighter than bulk impurity-bound exciton emitters in the ZnSe quantum well, as-well-as clear anti-bunching, which verifies the single photon emission from the source. Time-resolved photoluminescence spectroscopy reveals a Purcell-enhanced radiative decay process with a Purcell factor of 1.43. This work paves the way towards high efficiency spin-photon interfaces using an impurity-doped II-VI semiconductor coupled to nanophotonics.
△ Less
Submitted 4 October, 2023; v1 submitted 4 September, 2023;
originally announced September 2023.
-
Efficient, Spectrally Tunable Single-Photon Sources Based on Chlorine-Doped ZnSe Nanopillars
Authors:
Y. Kutovyi,
M. M. Jansen,
S. Qiao,
C. Falter,
N. von den Driesch,
T. Brazda,
N. Demarina,
S. Trellenkamp,
B. Bennemann,
D. Grützmacher,
A. Pawlis
Abstract:
Isolated impurity states in epitaxially grown semiconductor systems possess important radiative features such as distinct wavelength emission with a very short radiative lifetime and low inhomogeneous broadening which makes them promising for the generation of indistinguishable single photons. In this study, we investigate chlorine-doped ZnSe/ZnMgSe quantum well (QW) nanopillar (NP) structures as…
▽ More
Isolated impurity states in epitaxially grown semiconductor systems possess important radiative features such as distinct wavelength emission with a very short radiative lifetime and low inhomogeneous broadening which makes them promising for the generation of indistinguishable single photons. In this study, we investigate chlorine-doped ZnSe/ZnMgSe quantum well (QW) nanopillar (NP) structures as a highly efficient solid-state single-photon source operating at cryogenic temperatures. We show that single photons are generated due to the radiative recombination of excitons bound to neutral Cl atoms in ZnSe QW and the energy of the emitted photon can be tuned from about 2.85 down to 2.82 eV with ZnSe well width increase from 2.7 to 4.7 nm. Following the developed advanced technology we fabricate NPs with a diameter of about 250 nm using a combination of dry and wet-chemical etching of epitaxially grown ZnSe/ZnMgSe QW well structures. The remaining resist mask serves as a spherical- or cylindrical-shaped solid immersion lens on top of NPs and leads to the emission intensity enhancement by up to an order of magnitude in comparison to the pillars without any lenses. NPs with spherical-shaped lenses show the highest emission intensity values. The clear photon-antibunching effect is confirmed by the measured value of the second-order correlation function at a zero time delay of 0.14. The developed single-photon sources are suitable for integration into scalable photonic circuits.
△ Less
Submitted 20 May, 2022;
originally announced May 2022.
-
Correlations between cascaded photons from spatially localized biexcitons in ZnSe
Authors:
Robert M. Pettit,
Aziz Karasahin,
Nils von den Driesch,
Marvin Marco Jansen,
Alexander Pawlis,
Edo Waks
Abstract:
Radiative cascades emit correlated photon pairs, providing a pathway for the generation of entangled photons. The realization of a radiative cascade with impurity atoms in semiconductors, a leading platform for the generation of quantum light, would therefore provide a new avenue for the development of entangled photon pair sources. Here we demonstrate a radiative cascade from the decay of a biexc…
▽ More
Radiative cascades emit correlated photon pairs, providing a pathway for the generation of entangled photons. The realization of a radiative cascade with impurity atoms in semiconductors, a leading platform for the generation of quantum light, would therefore provide a new avenue for the development of entangled photon pair sources. Here we demonstrate a radiative cascade from the decay of a biexciton at an impurity-atom complex in a ZnSe quantum well. The emitted photons show clear temporal correlations revealing the time--ordering of the cascade. Our result establishes impurity atoms in ZnSe as a potential platform for photonic quantum technologies using radiative cascades.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Single quantum emitters with spin ground states based on Cl bound excitons in ZnSe
Authors:
Aziz Karasahin,
Robert M. Pettit,
Nils von den Driesch,
Marvin Marco Jansen,
Alexander Pawlis,
Edo Waks
Abstract:
Defects in wide-bandgap semiconductors are promising qubit candidates for quantum communication and computation. Epitaxially grown II-VI semiconductors are particularly promising host materials due to their direct bandgap and potential for isotopic purification to a spin-zero nuclear background. Here, we show a new type of single photon emitter with potential electron spin qubit based on Cl impuri…
▽ More
Defects in wide-bandgap semiconductors are promising qubit candidates for quantum communication and computation. Epitaxially grown II-VI semiconductors are particularly promising host materials due to their direct bandgap and potential for isotopic purification to a spin-zero nuclear background. Here, we show a new type of single photon emitter with potential electron spin qubit based on Cl impurities in ZnSe. We utilize a quantum well to increase the binding energies of donor emission and confirm single photon emission with short radiative lifetimes of 192 ps. Furthermore, we verify that the ground state of the Cl donor complex contains a single electron by observing two-electron satellite emission, leaving the electron in higher orbital states. We also characterize the Zeeman splitting of the exciton transition by performing polarization-resolved magnetic spectroscopy on single emitters. Our results suggest single Cl impurities are suitable as single photon source with potential photonic interface.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Engineering tunable strain fields in suspended graphene by microelectromechanical systems
Authors:
Jens Sonntag,
Matthias Goldsche,
Tymofiy Khodkov,
Gerard Verbiest,
Sven Reichardt,
Nils von den Driesch,
Dan Buca,
Christoph Stampfer
Abstract:
Here, we present a micro-electromechanical system (MEMS) for the investigation of the electromechanical coupling in graphene and potentially related 2D materials. Key innovations of our technique include: (1) the integration of graphene into silicon-MEMS technology; (2) full control over induced strain fields and do** levels within the graphene membrane and their characterization via spatially r…
▽ More
Here, we present a micro-electromechanical system (MEMS) for the investigation of the electromechanical coupling in graphene and potentially related 2D materials. Key innovations of our technique include: (1) the integration of graphene into silicon-MEMS technology; (2) full control over induced strain fields and do** levels within the graphene membrane and their characterization via spatially resolved confocal Raman spectroscopy; and (3) the ability to detect the mechanical coupling of the graphene sheet to the MEMS device with via their mechanical resonator eigenfrequencies.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Tunable coupling of two mechanical resonators by a graphene membrane
Authors:
G. J. Verbiest,
M. Goldsche,
J. Sonntag,
T. Khodkov,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
Coupled nanomechanical resonators are interesting for both fundamental studies and practical applications as they offer rich and tunable oscillation dynamics. At present, the mechanical coupling in such systems is often mediated by a fixed geometry, such as a joint clam** point of the resonators or a displacement-dependent force. Here we show a graphene-integrated electromechanical system consis…
▽ More
Coupled nanomechanical resonators are interesting for both fundamental studies and practical applications as they offer rich and tunable oscillation dynamics. At present, the mechanical coupling in such systems is often mediated by a fixed geometry, such as a joint clam** point of the resonators or a displacement-dependent force. Here we show a graphene-integrated electromechanical system consisting of two physically separated mechanical resonators -- a comb-drive actuator and a suspended silicon beam -- that are tunably coupled by a graphene membrane. The graphene membrane, moreover, provides a sensitive electrical read-out for the two resonating systems silicon structures showing 16 different modes in the frequency range from 0.4~to 24~MHz. In addition, by pulling on the graphene membrane with an electrostatic potential applied to one of the silicon resonators, we control the mechanical coupling, quantified by the $g$-factor, from 20 kHz to 100 kHz. Our results pave the way for coupled nanoelectromechanical systems requiring controllable mechanically coupled resonators.
△ Less
Submitted 6 November, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Ultra-low threshold cw and pulsed lasing in tensile strained GeSn alloys
Authors:
A. Elbaz,
D. Buca,
N. Von den Driesch,
K. Pantzas,
G. Patriarche,
N. Zerounian,
E. Herth,
X. Checoury,
S. Sauvage,
I. Sagnes,
A. Foti,
R. Ossikovski,
J. -M. Hartmann,
F. Boeuf,
Z. Ikonic,
P. Boucaud,
D. Grutzmacher,
M. El Kurdi
Abstract:
GeSn alloys are the most promising semiconductors for light emitters entirely based on group IV elements. Alloys containing more than 8 at.% Sn have fundamental direct band-gaps, similar to conventional III-V semiconductors and thus can be employed for light emitting devices. Here, we report on GeSn microdisk lasers encapsulated with a SiNx stressor layer to produce tensile strain. A 300nm GeSn la…
▽ More
GeSn alloys are the most promising semiconductors for light emitters entirely based on group IV elements. Alloys containing more than 8 at.% Sn have fundamental direct band-gaps, similar to conventional III-V semiconductors and thus can be employed for light emitting devices. Here, we report on GeSn microdisk lasers encapsulated with a SiNx stressor layer to produce tensile strain. A 300nm GeSn layer with 5.4 at.% Sn, which is an indirect band-gap semiconductor as-grown with a compressive strain of -0.32 %, is transformed via tensile strain engineering into a truly direct band-gap semiconductor. In this approach the low Sn concentration enables improved defect engineering and the tensile strain delivers a low density of states at the valence band edge, which is the light hole band. Continuous wave (cw) as well as pulsed lasing are observed at very low optical pump powers. Lasers with emission wavelength of 2.5 um have thresholds as low as 0.8kWcm^-2 for ns-pulsed excitation, and 1.1kWcm^-2 under cw excitation. These thresholds are more than two orders of magnitude lower than those previously reported for bulk GeSn lasers, approaching these values obtained for III-V lasers on Si. The present results demonstrate the feasabiliy and are the guideline for monolithically integrated Si-based laser sources on Si photonics platform.
△ Less
Submitted 14 January, 2020;
originally announced January 2020.
-
Thermally activated diffusion and lattice relaxation in (Si)GeSn materials
Authors:
Nils von den Driesch,
Stephan Wirths,
Rene Troitsch,
Gregor Mussler,
Uwe Breuer,
Oussama Moutanabbir,
Detlev Grützmacher,
Dan Buca
Abstract:
Germanium-Tin (GeSn) alloys have emerged as a promising material for future optoelectronics, energy harvesting and nanoelectronics owing to their direct bandgap and compatibility with existing Si-based electronics. Yet, their metastability poses significant challenges calling for in-depth investigations of their thermal behavior. With this perspective, this work addresses the interdiffusion proces…
▽ More
Germanium-Tin (GeSn) alloys have emerged as a promising material for future optoelectronics, energy harvesting and nanoelectronics owing to their direct bandgap and compatibility with existing Si-based electronics. Yet, their metastability poses significant challenges calling for in-depth investigations of their thermal behavior. With this perspective, this work addresses the interdiffusion processes throughout thermal annealing of pseudomorphic GeSn binary and SiGeSn ternary alloys. In both systems, the initially pseudomorphic layers are relaxed upon annealing exclusively via thermally induced diffusional mass transfer of Sn. Systematic post-growth annealing experiments reveal enhanced Sn and Si diffusion regimes that manifest at temperatures below 600°C. The amplified low-temperature diffusion and the observation of only subtle differences between binary and ternary hint at the unique metastability of the Si-Ge-Sn material system as the most important driving force for phase separation.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Integrated impedance bridge for absolute capacitance measurements at cryogenic temperatures and finite magnetic fields
Authors:
G. J. Verbiest,
H. Janssen,
D. Xu,
X. Ge,
M. Goldsche,
J. Sonntag,
T. Khodkov,
L. Banszerus,
N. von den Driesch,
D. Buca,
K. Watanabe,
T. Taniguchi,
C. Stampfer
Abstract:
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of t…
▽ More
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of the total impedance into an absolute capacitance and a resistance. Through a detailed noise characterization, we find that the best resolution is obtained when operating the HEMT amplifier at the highest gain. We obtained a resolution in the absolute capacitance of 6.4~aF$/\sqrt{\textrm{Hz}}$ at 77 K on a comb-drive actuator, while maintaining a small excitation amplitude of 15~$k_\text{B} T/e$. We show the magnetic field functionality of our impedance bridge by measuring the quantum Hall plateaus of a top-gated hBN/graphene/hBN heterostructure at 60~mK with a probe signal of 12.8~$k_\text{B} T/e$.
△ Less
Submitted 27 June, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
Fabrication of comb-drive actuators for straining nanostructured suspended graphene
Authors:
M. Goldsche,
G. J. Verbiest,
T. Khodkov,
J. Sonntag,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room te…
▽ More
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room temperature in order to allow for strain-dependent transport measurements. The graphene is integrated by mechanically transferring it directly onto the actuator using a polymethylmethacrylate membrane. Importantly, the integrated graphene can be nanostructured afterwards to optimize device functionality. The minimum feature size of the structured suspended graphene is 30 nm, which allows for interesting device concepts such as mechanically-tunable nanoconstrictions. Finally, we characterize the fabricated devices by measuring the Raman spectrum as well as the a mechanical resonance frequency of an integrated graphene sheet for different strain values.
△ Less
Submitted 7 June, 2018; v1 submitted 11 April, 2018;
originally announced April 2018.
-
Tailoring mechanically-tunable strain fields in graphene
Authors:
M. Goldsche,
J. Sonntag,
T. Khodkov,
G. Verbiest,
S. Reichardt,
C. Neumann,
T. Ouaj,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substr…
▽ More
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substrate. Here, we report on silicon micro-machined comb-drive actuators to controllably and reproducibly induce strain in a suspended graphene sheet, in an entirely mechanical way. We use spatially resolved confocal Raman spectroscopy to quantify the induced strain, and we show that different strain fields can be obtained by engineering the clam** geometry, including tunable strain gradients of up to 1.4 %/$μ$m. Our approach also allows for multiple axis straining and is equally applicable to other two-dimensional materials, opening the door to an investigating their mechanical and electromechanical properties. Our measurements also clearly identify defects at the edges of a graphene sheet as being weak spots responsible for its mechanical failure.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
-
Electrical resistance of individual defects at a topological insulator surface
Authors:
Felix Lüpke,
Markus Eschbach,
Tristan Heider,
Martin Lanius,
Peter Schüffelgen,
Daniel Rosenbach,
Nils von den Driesch,
Vasily Cherepanov,
Gregor Mussler,
Lukasz Plucinski,
Detlev Grützmacher,
Claus M. Schneider,
Bert Voigtländer
Abstract:
Three-dimensional topological insulators host surface states with linear dispersion, which manifest as a Dirac cone. Nanoscale transport measurements provide direct access to the transport properties of the Dirac cone in real space and allow the detailed investigation of charge carrier scattering. Here, we use scanning tunnelling potentiometry to analyse the resistance of different kinds of defect…
▽ More
Three-dimensional topological insulators host surface states with linear dispersion, which manifest as a Dirac cone. Nanoscale transport measurements provide direct access to the transport properties of the Dirac cone in real space and allow the detailed investigation of charge carrier scattering. Here, we use scanning tunnelling potentiometry to analyse the resistance of different kinds of defects at the surface of a (Bi0.53Sb0.47)2Te3 topological insulator thin film. The largest localized voltage drop we find to be located at domain boundaries in the topological insulator film, with a resistivity about four times higher than that of a step edge. Furthermore, we resolve resistivity dipoles located around nanoscale voids in the sample surface. The influence of such defects on the resistance of the topological surface state is analysed by means of a resistor network model. The effect resulting from the voids is found to be small compared to the other defects.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Tunable mechanical coupling between driven microelectromechanical resonators
Authors:
G. J. Verbiest,
D. Xu,
M. Goldsche,
T. Khodkov,
S. Barzanjeh,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
We present a microelectromechanical system, in which a silicon beam is attached to a comb-drive actuator, that is used to tune the tension in the silicon beam, and thus its resonance frequency. By measuring the resonance frequencies of the system, we show that the comb-drive actuator and the silicon beam behave as two strongly coupled resonators. Interestingly, the effective coupling rate (~ 1.5 M…
▽ More
We present a microelectromechanical system, in which a silicon beam is attached to a comb-drive actuator, that is used to tune the tension in the silicon beam, and thus its resonance frequency. By measuring the resonance frequencies of the system, we show that the comb-drive actuator and the silicon beam behave as two strongly coupled resonators. Interestingly, the effective coupling rate (~ 1.5 MHz) is tunable with the comb-drive actuator (+10%) as well as with a side-gate (-10%) placed close to the silicon beam. In contrast, the effective spring constant of the system is insensitive to either of them and changes only by $\pm$ 0.5%. Finally, we show that the comb-drive actuator can be used to switch between different coupling rates with a frequency of at least 10 kHz.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Suppression of contact-induced spin dephasing in graphene/MgO/Co spin-valve devices by successive oxygen treatments
Authors:
F. Volmer,
M. Drögeler,
E. Maynicke,
N. von den Driesch,
M. L. Boschen,
G. Güntherodt,
C. Stampfer,
B. Beschoten
Abstract:
By successive oxygen treatments of graphene non-local spin-valve devices we achieve a gradual increase of the contact resistance area products ($R_cA$) of Co/MgO spin injection and detection electrodes and a transition from linear to non-linear characteristics in the respective differential dV-dI-curves. With this manipulation of the contacts both spin lifetime and amplitude of the spin signal can…
▽ More
By successive oxygen treatments of graphene non-local spin-valve devices we achieve a gradual increase of the contact resistance area products ($R_cA$) of Co/MgO spin injection and detection electrodes and a transition from linear to non-linear characteristics in the respective differential dV-dI-curves. With this manipulation of the contacts both spin lifetime and amplitude of the spin signal can significantly be increased by a factor of seven in the same device. This demonstrates that contact-induced spin dephasing is the bottleneck for spin transport in graphene devices with small $R_cA$ values. With increasing $R_cA$ values, we furthermore observe the appearance of a second charge neutrality point (CNP) in gate dependent resistance measurements. Simultaneously, we observe a decrease of the gate voltage separation between the two CNPs. The strong enhancement of the spin transport properties as well as the changes in charge transport are explained by a gradual suppression of a Co/graphene interaction by improving the oxide barrier during oxygen treatment.
△ Less
Submitted 6 August, 2014;
originally announced August 2014.
-
Role of MgO barriers for spin and charge transport in Co/MgO/graphene non-local spin-valve devices
Authors:
F. Volmer,
M. Drögeler,
E. Maynicke,
N. von den Driesch,
M. L. Boschen,
G. Güntherodt,
B. Beschoten
Abstract:
We investigate spin and charge transport in both single and bilayer graphene non-local spin-valve devices. Similar to previous studies on bilayer graphene, we observe an inverse dependence of the spin lifetime on the carrier mobility in our single layer devices. This general trend is only observed in devices with large contact resistances. Furthermore, we observe a second Dirac peak in devices wit…
▽ More
We investigate spin and charge transport in both single and bilayer graphene non-local spin-valve devices. Similar to previous studies on bilayer graphene, we observe an inverse dependence of the spin lifetime on the carrier mobility in our single layer devices. This general trend is only observed in devices with large contact resistances. Furthermore, we observe a second Dirac peak in devices with long spin lifetimes. This results from charge transport underneath the contacts. In contrast, all devices with low ohmic contact resistances only exhibit a single Dirac peak. Additionally, the spin lifetime is significantly reduced indicating that an additional spin dephasing occurs underneath the electrodes.
△ Less
Submitted 25 September, 2013; v1 submitted 28 May, 2013;
originally announced May 2013.