-
Spreading of Low-viscosity Ink Filaments Driven by Bath Viscoelasticity in Embedded Printing
Authors:
Jae Hyung Cho,
Emilie Dressaire
Abstract:
Inks deposited in conventional direct ink writing need to be able to support their own weight and that of the upper layers with minimal deformation to preserve the structural integrity of the three-dimensional (3D) printed parts. This constraint limits the range of usable inks to high-viscosity materials. Embedded printing enables the use of much softer inks by depositing the materials in a bath o…
▽ More
Inks deposited in conventional direct ink writing need to be able to support their own weight and that of the upper layers with minimal deformation to preserve the structural integrity of the three-dimensional (3D) printed parts. This constraint limits the range of usable inks to high-viscosity materials. Embedded printing enables the use of much softer inks by depositing the materials in a bath of another fluid that provides external support, thus diversifying the types of 3D printable structures. The interactions between the ink and bath fluids, however, give rise to a unique type of defect: spreading of the dispensed ink behind the moving nozzle. By printing horizontal threads made of dyed water in baths of Carbopol suspensions, we demonstrate that the spreading can be attributed to the pressure field generated in the viscous bath by the relative motion of the nozzle. As the pressure gradient increases with the viscosity of the bath fluid while the viscosity of the ink resists the flow, a larger bath-to-ink viscosity ratio results in more spreading for low-concentration Carbopol baths. For high-concentration, yield-stress-fluid baths, we find that the steady-state viscosity alone cannot account for the spreading, as the elastic stress becomes comparable to the viscous stress and the bath fluid around the dispensed ink undergoes fluidization and resolidification. By parameterizing the transient rheology of the high-concentration Carbopol suspensions using a simple viscoelastic model, we suggest that the ink spreading is exacerbated by the elasticity but is mitigated by the yield stress as long as the yield stress is low enough to allow steady injection of the ink. These results help illuminate the link between the bath rheology and the printing quality in embedded 3D printing.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Clog mitigation in a microfluidic array via pulsatile flows
Authors:
Brian Dincau,
Connor Tang,
Emilie Dressaire,
Alban Sauret
Abstract:
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer recharge. Pulsatile pressure-driven flows can help mitigate clogging when compared to steady flows. Here, we study experimentally the influence of the amplitude of…
▽ More
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer recharge. Pulsatile pressure-driven flows can help mitigate clogging when compared to steady flows. Here, we study experimentally the influence of the amplitude of pulsation $0.25\,P_0 \leq δP \leq 1.25\,P_0$, where $P_0$ is the mean pressure, and of the frequency of pulsation $10^{-3}\,{\rm Hz} \leq f \leq 10^{-1}\,{\rm Hz}$ on clog mitigation in a microfluidic array of parallel channels using a dilute suspension of colloidal particles. The array geometry is representative of a classical filter, with parallel pores that clog over time, yielding a filter cake that continues to grow and can interact with other pores. We combine flow rate measurements with direct visualizations at the pore scale to correlate the observed clogging dynamics with the changes in flow rate. We observe that all pulsatile amplitudes at $0.1$ Hz yield increased throughput compared to steady flows. The rearrangement of particles when subject to a dynamic shear environment can delay the clogging of a pore or even remove an existing clog. However, this benefit is drastically reduced at $10^{-2}$ Hz and disappears at $10^{-3}$ Hz as the pulsatile timescale becomes too large compared to the timescale associated with the clogging and the growth of the filter cakes in this system. The present study demonstrates that pulsatile flows are a promising method to delay clogging at both the pore and system scale.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Capillary filtering of particles during dip coating
Authors:
Alban Sauret,
Adrien Gans,
Benedicte Colnet,
Guillaume Saingier,
Martin Z. Bazant,
Emilie Dressaire
Abstract:
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid co…
▽ More
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid contamination of the substrate, at sufficiently low withdrawal velocity in diluted suspensions. Using a model system consisting of a plate exiting a liquid bath, we observe that particles can remain trapped in the meniscus which exerts a resistive capillary force to the entrainment. We characterize different entrainment regimes as the withdrawal velocity increases: from a pure liquid film, to a liquid film containing clusters of particles, and eventually individual particles. This capillary filtration is an effective barrier against the contamination of substrates withdrawn from a polluted bath and finds application against biocontamination.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Capillary Sorting of Particles by Dip Coating
Authors:
Brian M. Dincau,
Martin Z. Bazant,
Emilie Dressaire,
Alban Sauret
Abstract:
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the…
▽ More
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the deformable meniscus. This force threshold occurs at different liquid thicknesses for particles of different sizes. Here, we show that this difference can be used to separate small particles from a mixed suspension through capillary filtration. In a bidisperse suspension, we observe three distinct filtration regimes. At low capillary numbers, Ca, no particles are entrained in the liquid coating. At high Ca, all particle sizes are entrained. For a range of capillary numbers between these two extremes, only the smallest particles are entrained while the larger ones remain in the reservoir. We explain how this technique can be applied to polydisperse suspension. We also provide an estimate of the range of capillary number to separate particles of given sizes. The combination of this technique with the scalability and robustness of dip coating makes it a promising candidate for high-throughput separation or purification of industrial and biomedical suspensions.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Dip-coating of suspensions
Authors:
A. Gans,
E. Dressaire,
B. Colnet,
G. Saingier,
M. Z. Bazant,
A. Sauret
Abstract:
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the…
▽ More
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the diameter of the particles $2\,a$. Our results exhibit three coating regimes. (i) At small enough capillary number $Ca$, no particles are entrained, and only a liquid film coats the plate. (ii) At large capillary number, we observe that the thickness of the entrained film of suspension is captured by the Landau-Levich law using the effective viscosity of the suspension $η(φ)$. (iii) At intermediate capillary numbers, the situation becomes more complicated with a heterogeneous coating on the substrate. We rationalize our experimental findings by providing the domain of existence of these three regimes as a function of the fluid and particles properties.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Growth of clogs in parallel microchannels
Authors:
Alban Sauret,
Katarzyna Somszor,
Emmanuel Villermaux,
Emilie Dressaire
Abstract:
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate upstream from the site of the blockage. This aggregate grows over time, which leads to a dramatic reduction of the flow rate. In this paper, we present a model that p…
▽ More
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate upstream from the site of the blockage. This aggregate grows over time, which leads to a dramatic reduction of the flow rate. In this paper, we present a model that predicts the growth of the aggregate formed upon clogging of a microchannel. We develop an analytical description that captures the time evolution of the volume of the aggregate, as confirmed by experiments performed using a pressure-driven suspension flow in a microfluidic device. We show that the growth of the aggregate increases the hydraulic resistance in the channel and leads to a drop in the flow rate of the suspensions. We then derive a model for the growth of aggregates in multiple parallel microchannels where the clogging events are described using a stochastic approach. The aggregate growths in the different channels are coupled. Our work illustrates the critical influence of clogging events on the evolution of the flow rate in microchannels. The coupled dynamics of the aggregates described here for parallel channels is key to bridge clogging at the pore scale with macroscopic observations of the flow rate evolution at the filter scale.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Drop morphologies on flexible fibers: influence of elastocapillary effects
Authors:
Alban Sauret,
Francois Boulogne,
Katarzyna Somszor,
Emilie Dressaire,
Howard A. Stone
Abstract:
Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liqu…
▽ More
Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liquid on a pair of crossed flexible fibers, through a model situation. We characterize the liquid morphologies as we vary the volume of liquid, the angle between the fibers, and the length of the fibers. The drop morphologies previously reported for rigid crossed fibers, i.e., a drop, a column and a mixed morphology, are also observed on flexible crossed fibers with modified domains of existence. In addition, at small tilting angles between the fibers, a new behavior is observed: the fibers bend and collapse. Depending on the volume of liquid, a thin column with or without a drop is reported on the collapsed fibers. Our study suggests that the fiber flexibility adds a rich variety of behaviors that may be important for some applications.
△ Less
Submitted 8 October, 2016;
originally announced October 2016.
-
Mushroom spore dispersal by convectively-driven winds
Authors:
Emilie Dressaire,
Lisa Yamada,
Boya Song,
Marcus Roper
Abstract:
Thousands of fungal species rely on mushroom spores to spread across landscapes. It has long been thought that spores depend on favorable airflows for dispersal -- that active control of spore dispersal by the parent fungus is limited to an impulse delivered to the spores to carry them clear of the gill surface. Here we show that evaporative cooling of the air surrounding the mushroom pileus creat…
▽ More
Thousands of fungal species rely on mushroom spores to spread across landscapes. It has long been thought that spores depend on favorable airflows for dispersal -- that active control of spore dispersal by the parent fungus is limited to an impulse delivered to the spores to carry them clear of the gill surface. Here we show that evaporative cooling of the air surrounding the mushroom pileus creates convective airflows capable of carrying spores at speeds of centimeters per second. Convective cells can transport spores from gaps that may be only a centimeter high, and lift spores ten centimeters or more into the air. The work reveals how mushrooms tolerate and even benefit from crowding, and provides a new explanation for their high water needs.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
Defining individual size in the model filamentous fungus $\textit{Neurospora crassa}$
Authors:
Linda Ma,
Boya Song,
Thomas Curran,
Nhu Phong,
Emilie Dressaire,
Marcus Roper
Abstract:
It is challenging to apply the tenets of individuality to filamentous fungi: a fungal mycelium can contain millions of genetically diverse but totipotent nuclei, each capable of founding new mycelia. Moreover a single mycelium can potentially stretch over kilometers and it is unlikely that its distant parts share resources or have the same fitness. Here we directly measure how a single mycelium of…
▽ More
It is challenging to apply the tenets of individuality to filamentous fungi: a fungal mycelium can contain millions of genetically diverse but totipotent nuclei, each capable of founding new mycelia. Moreover a single mycelium can potentially stretch over kilometers and it is unlikely that its distant parts share resources or have the same fitness. Here we directly measure how a single mycelium of the model ascomycete {\it Neurospora crassa} is patterned into Reproductive Units (RUs); subpopulations of nuclei that propagate together as spores, and function as reproductive individuals. The density of RUs is sensitive to the geometry of growth; we detect 50-fold smaller RUs when mycelia had expanding frontiers than when they were constrained to grow in one direction only. RUs fragmented further when the mycelial network was perturbed. In mycelia with expanding frontiers RU composition was strongly influenced by the distribution of genotypes early in development. Our results provide a concept of fungal individuality that is directly connected to reproductive potential, and therefore to theories of how fungal individuals adapt and evolve over time. Our data show that the size of reproductive individuals is a dynamic and environment-dependent property, even within apparently totally connected fungal mycelia.
△ Less
Submitted 4 January, 2016; v1 submitted 30 October, 2015;
originally announced October 2015.
-
Drop impact on a flexible fiber
Authors:
Emilie Dressaire,
Alban Sauret,
François Boulogne,
Howard A. Stone
Abstract:
When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understandin…
▽ More
When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understanding of the capture process for soft substrates. Here, we study experimentally the dynamics of a single drop impacting on a thin flexible fiber. Our results demonstrate that the threshold capture velocity depends on the flexibility of fibers in a non-monotonic way. We conclude that tuning the mechanical properties of fibers can optimize the efficiency of droplet capture.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Wetting morphologies on randomly oriented fibers
Authors:
Alban Sauret,
François Boulogne,
Beatrice Soh,
Emilie Dressaire,
Howard A. Stone
Abstract:
We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Dep…
▽ More
We characterize the different morphologies adopted by a drop of liquid placed on two randomly oriented fibers, which is a first step toward understanding the wetting of fibrous networks. The present work reviews previous modeling for parallel and touching crossed fibers and extends it to an arbitrary orientation of the fibers characterized by the tilting angle and the minimum spacing distance. Depending on the volume of liquid, the spacing distance between fibers and the angle between the fibers, we highlight that the liquid can adopt three different equilibrium morphologies: (1) a column morphology in which the liquid spreads between the fibers, (2) a mixed morphology where a drop grows at one end of the column or (3) a single drop located at the node. We capture the different morphologies observed using an analytical model that predicts the equilibrium configuration of the liquid based on the geometry of the fibers and the volume of liquid.
△ Less
Submitted 28 August, 2015;
originally announced August 2015.
-
Wetting morphologies on an array of fibers of different radii
Authors:
Alban Sauret,
François Boulogne,
David Cébron,
Emilie Dressaire,
Howard A. Stone
Abstract:
We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the…
▽ More
We investigate the equilibrium morphology of a finite volume of liquid placed on two parallel rigid fibers of different radii. As observed for identical radii fibers, the liquid is either in a column morphology or adopts a drop shape depending on the inter-fiber distance. However the cross-sectional area and the critical inter-fiber distance at which the transition occurs are both modified by the polydispersity of the fibers. Using energy considerations, we analytically predict the critical inter-fiber distance corresponding to the transition between the column and the drop morphologies occurs. This distance depends both on the radii of the fibers and on the contact angle of the liquid. We perform experiments using a perfectly wetting liquid on two parallel nylon fibers: the results are in good agreement with our analytical model. The morphology of the capillary bridges between fibers of different radii is relevant to the modeling of large arrays of polydisperse fibers.
△ Less
Submitted 22 April, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
-
Mechanical tuning of the evaporation rate of liquid on crossed fibers
Authors:
François Boulogne,
Alban Sauret,
Beatrice Soh,
Emilie Dressaire,
Howard A. Stone
Abstract:
We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics.…
▽ More
We investigate experimentally the drying of a small volume of perfectly wetting liquid on two crossed fibers. We characterize the drying dynamics for the three liquid morphologies that are encountered in this geometry: drop, column and a mixed morphology, in which a drop and a column coexist. For each morphology, we rationalize our findings with theoretical models that capture the drying kinetics. We find that the evaporation rate depends significantly on the liquid morphology and that the drying of liquid column is faster than the evaporation of the drop and the mixed morphology for a given liquid volume. Finally, we illustrate that shearing a network of fibers reduces the angle between them, changes the morphology towards the column state, and so enhances the drying rate of a volatile liquid deposited on it.
△ Less
Submitted 11 March, 2015; v1 submitted 7 January, 2015;
originally announced January 2015.
-
Dam** of liquid sloshing by foams
Authors:
Alban Sauret,
François Boulogne,
Jean Cappello,
Emilie Dressaire,
Howard A. Stone
Abstract:
When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on slo…
▽ More
When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the dam** coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.
△ Less
Submitted 1 February, 2015; v1 submitted 24 November, 2014;
originally announced November 2014.
-
Dam** of liquid sloshing by foams: from everyday observations to liquid transport
Authors:
Jean Cappello,
Alban Sauret,
François Boulogne,
Emilie Dressaire,
Howard A. Stone
Abstract:
We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport.
We perform experiments on the sloshing dynamics of liquids in a rectangular container submitted to an impulse. We show that when foam is placed on top of the liquid the oscillations of the free interface are significantly damped. The ability to reduce sloshing and associated splashing could find applications in numerous industrial processes involving liquid transport.
△ Less
Submitted 8 November, 2014;
originally announced November 2014.
-
Clogging by sieving in microchannels: Application to the detection of contaminants in colloidal suspensions
Authors:
Alban Sauret,
Erin C. Barney,
Adeline Perro,
Emmanuel Villermaux,
Howard A. Stone,
Emilie Dressaire
Abstract:
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of constrictions, i.e. a microchannel of varying cross-section. We show and quantify the role of large contaminants in the formation of clogs at a constriction and…
▽ More
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of constrictions, i.e. a microchannel of varying cross-section. We show and quantify the role of large contaminants in the formation of clogs at a constriction and the growth of the resulting filter cake. By measuring the time interval between two clogging events in an array of parallel microchannels, we are able to estimate the concentration of contaminants whose size is selected by the geometry of the microfluidic device. This technique for characterizing colloidal suspensions offers a versatile and rapid tool to explore the role of contaminants on the properties of the suspensions.
△ Less
Submitted 22 August, 2014;
originally announced August 2014.