Showing 1–28 of 28 results for author: Dravid, V P

Operando Analysis of Adsorption-Limited Hydrogen Oxidation Reaction at Palladium Surfaces

Authors: Yukun Liu, Kunmo Koo, Zugang Mao, Xianbiao Fu, Xiaobing Hu, Vinayak P. Dravid

Abstract: Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H2O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing… ▽ More Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H2O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing mechanisms and kinetics of its intermediate reaction stages under varying gas conditions remains elusive. This is attributed to the intricate interplay between adsorption, atomic diffusion, and concurrent phase transformation of catalyst. Herein, the Pd-catalyzed, water-forming hydrogen oxidation is studied, in situ, to investigate intermediate reaction stages via fluid cell transmission electron microscopy. The dynamic behaviors of water generation, associated with reversible palladium hydride formation, are captured in real time with a nanoscale spatial resolution. Our findings suggest that the hydrogen oxidation rate catalyzed by Pd is significantly affected by the sequence in which gases are introduced. Through direct evidence of electron diffraction and density functional theory calculation, we demonstrate that the hydrogen oxidation rate is limited by adsorption processes of gas precursors. These nanoscale insights help identify the optimal reaction conditions for Pd-catalyzed hydrogen oxidation, which has substantial implications for water production technologies. The developed understanding also advocates a broader exploration of analogous mechanisms in other metal-catalyzed reactions. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: 30 pages, 4 figures

Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing

Authors: Carlos G. Torres-Castanedo, Dominic P. Goronzy, Thang Pham, Anthony McFadden, Nicholas Materise, Paul Masih Das, Matthew Cheng, Dmitry Lebedev, Stephanie M. Ribet, Mitchell J. Walker, David A. Garcia-Wetten, Cameron J. Kopas, Jayss Marshall, Ella Lachman, Nikolay Zhelev, James A. Sauls, Joshua Y. Mutus, Corey Rae H. McRae, Vinayak P. Dravid, Michael J. Bedzyk, Mark C. Hersam

Abstract: Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potenti… ▽ More Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potentially negatively impacting microwave loss performance. Here, we present comprehensive materials characterization of Nb hydrides formed in Nb thin films as a function of fluoride chemical treatments. In particular, secondary-ion mass spectrometry, X-ray scattering, and transmission electron microscopy reveal the spatial distribution and phase transformation of Nb hydrides. The rate of hydride formation is determined by the fluoride solution acidity and the etch rate of Nb2O5, which acts as a diffusion barrier for hydrogen into Nb. The resulting Nb hydrides are detrimental to Nb superconducting properties and lead to increased power-independent microwave loss in coplanar waveguide resonators. However, Nb hydrides do not correlate with two-level system loss or device aging mechanisms. Overall, this work provides insight into the formation of Nb hydrides and their role in microwave loss, thus guiding ongoing efforts to maximize coherence time in superconducting quantum devices. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Electron-Induced Radiolysis Chemistry in Fluid Cell Electron Microscopy: Application on the Reactivity of Aluminum Nanocubes

Authors: Kunmo Koo, Nikhil S. Chellam, Sangyoon Shim, Chad A. Mirkin, George C. Schatz, Xiaobing Hu, Vinayak P. Dravid

Abstract: Leveraging the high energy electrons as probe for the atomic landscape of materials, the importance of understanding radiolysis chemistry in the field of transmission electron microscopy (TEM) is exceptionally important. Reactive chemical species generated from electron-material interactions diffuse throughout the sample and may induce "artifact" reactions with the specimen of interest. However, i… ▽ More Leveraging the high energy electrons as probe for the atomic landscape of materials, the importance of understanding radiolysis chemistry in the field of transmission electron microscopy (TEM) is exceptionally important. Reactive chemical species generated from electron-material interactions diffuse throughout the sample and may induce "artifact" reactions with the specimen of interest. However, in other aspects, this radiolysis can be utilized to intentionally trigger chemical reactions related to the nucleation and growth of colloidal nanoparticles, as well as chemical etching under a priori conditions in fluid condition. Therefore, systematic research and new theories are required to help researchers gain a deeper understanding of these electron-materials interactions either to mitigate damage or rationally use radical chemistry especially in the environmental TEM (E-TEM). Radiolysis in open-cell gas phase TEM (GPTEM) under reduced pressures is usually disregarded considering the low density of molecules and high diffusivity. However, for emerging closed-cell GPTEM, which usually involves the usage of higher pressures, less is known. Here, we utilize an ultrathin (UT) silicon nitride gas cell to investigate and quantify the effects of electron dosage on the oxidation behavior of {100}-faceted aluminum (Al) nanocubes under various conditions. In addition, we develop a generalized computational code to elucidate radiolysis chemistry in varying media with consideration of the diffusion dynamics, while rationalizing the experimental observations. Based on these theoretical electron-fluid interaction models, we propose guidelines to control the radical species of the closed-cell in situ nanoreactors, paving the way to the nanoscale control of chemical reactions in E-TEM. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Iterative Phase Retrieval Algorithms for Scanning Transmission Electron Microscopy

Authors: Georgios Varnavides, Stephanie M. Ribet, Steven E. Zeltmann, Yue Yu, Benjamin H. Savitzky, Dana O. Byrne, Frances I. Allen, Vinayak P. Dravid, Mary C. Scott, Colin Ophus

Abstract: Scanning transmission electron microscopy (STEM) has been extensively used for imaging complex materials down to atomic resolution. The most commonly employed STEM modality, annular dark-field imaging, produces easily-interpretable contrast, but is dose-inefficient and produces little to no discernible contrast for light elements and weakly-scattering samples. An alternative is to use STEM phase r… ▽ More Scanning transmission electron microscopy (STEM) has been extensively used for imaging complex materials down to atomic resolution. The most commonly employed STEM modality, annular dark-field imaging, produces easily-interpretable contrast, but is dose-inefficient and produces little to no discernible contrast for light elements and weakly-scattering samples. An alternative is to use STEM phase retrieval imaging, enabled by high speed detectors able to record full images of a diffracted STEM probe over a grid of scan positions. Phase retrieval imaging in STEM is highly dose-efficient, enabling the measurement of the structure of beam-sensitive materials such as biological samples. Here, we comprehensively describe the theoretical background, algorithmic implementation details, and perform both simulated and experimental tests for three iterative phase retrieval STEM methods: focused-probe differential phase contrast, defocused-probe parallax imaging, and a generalized ptychographic gradient descent method implemented in two and three dimensions. We discuss the strengths and weaknesses of each of these approaches by comparing the transfer of information using analytical expressions and numerical results for a white-noise model. This presentation of STEM phase retrieval methods aims to make these methods more approachable, reproducible, and more readily adoptable for many classes of samples. △ Less

Submitted 20 May, 2024; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 25 pages, 14 figures, 1 table

Unlocking the Structural Mystery of Vaterite CaCO3

Authors: Xingyuan San, Junwei Hu, Mingyi Chen, Haiyang Niu, Paul J. M. Smeets, Jie Deng, Kunmo Koo, Roberto dos Reis, Vinayak P. Dravid, Xiaobing Hu

Abstract: Calcium carbonate (CaCO3), the most abundant biogenic mineral on earth, plays a crucial role in various fields. Of the four polymorphs, calcite, aragonite, vaterite, and amorphous CaCO3, vaterite is the most enigmatic one due to an ongoing debate regarding its structure that has persisted for nearly a century. In this work, based on systematic transmission electron microscopy characterizations, el… ▽ More Calcium carbonate (CaCO3), the most abundant biogenic mineral on earth, plays a crucial role in various fields. Of the four polymorphs, calcite, aragonite, vaterite, and amorphous CaCO3, vaterite is the most enigmatic one due to an ongoing debate regarding its structure that has persisted for nearly a century. In this work, based on systematic transmission electron microscopy characterizations, elaborate crystallographic analysis and machine learning aided molecular dynamics simulations with ab initio accuracy, we reveal that vaterite can be regarded as a polytypic structure. The basic phase is a monoclinic lattice possessing pseudohexagonal symmetry. Direct imaging and atomic-scale simulations provide evidence that a single grain of vaterite can have three orientation variants. Additionally, we find that vaterite undergoes a second-order phase transition. These atomic scale insights provide a comprehensive understanding of the structure of vaterite and offer new perspectives on the biomineralization process of calcium carbonate. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

Authors: Mustafa Bal, Akshay A. Murthy, Shaojiang Zhu, Francesco Crisa, Xinyuan You, Ziwen Huang, Tanay Roy, Jaeyel Lee, David van Zanten, Roman Pilipenko, Ivan Nekrashevich, Andrei Lunin, Daniel Bafia, Yulia Krasnikova, Cameron J. Kopas, Ella O. Lachman, Duncan Miller, Josh Y. Mutus, Matthew J. Reagor, Hilal Cansizoglu, Jayss Marshall, David P. Pappas, Kim Vu, Kameshwar Yadavalli, **-Su Oh , et al. (15 additional authors not shown)

Abstract: We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigati… ▽ More We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different cap** materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When cap** niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes. △ Less

Submitted 24 January, 2024; v1 submitted 25 April, 2023; originally announced April 2023.

Journal ref: npj Quantum Inf 10, 43 (2024)

Design of Electrostatic Aberration Correctors for Scanning Transmission Electron Microscopy

Authors: Stephanie M. Ribet, Steven E. Zeltmann, Karen C. Bustillo, Rohan Dhall, Peter Denes, Andrew M. Minor, Roberto dos Reis, Vinayak P. Dravid, Colin Ophus

Abstract: In a scanning transmission electron microscope (STEM), producing a high-resolution image generally requires an electron beam focused to the smallest point possible. However, the magnetic lenses used to focus the beam are unavoidably imperfect, introducing aberrations that limit resolution. Modern STEMs overcome this by using hardware aberration correctors comprised of many multipole lenses, but th… ▽ More In a scanning transmission electron microscope (STEM), producing a high-resolution image generally requires an electron beam focused to the smallest point possible. However, the magnetic lenses used to focus the beam are unavoidably imperfect, introducing aberrations that limit resolution. Modern STEMs overcome this by using hardware aberration correctors comprised of many multipole lenses, but these devices are complex, expensive, and can be difficult to tune. We demonstrate a design for an electrostatic phase plate that can act as an aberration corrector. The corrector is comprised of annular segments, each of which is an independent two-terminal device that can apply a constant or ramped phase shift to a portion of the electron beam. We show the improvement in image resolution using an electrostatic corrector. Engineering criteria impose that much of the beam within the probe-forming aperture be blocked by support bars, leading to large probe tails for the corrected probe that sample the specimen beyond the central lobe. We also show how this device can be used to create other STEM beam profiles such as vortex beams and beams with a high degree of phase diversity, which improve information transfer in ptychographic reconstructions. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Comments: 12 pages, 10 figures

Defect contrast with 4D-STEM: Understanding crystalline order with virtual detectors and beam modification

Authors: Stephanie M. Ribet, Colin Ophus, Roberto dos Reis, Vinayak P. Dravid

Abstract: Material properties strongly depend on the nature and concentration of defects. Characterizing these features may require nano- to atomic-scale resolution to establish structure-property relationships. 4D-STEM, a technique where diffraction patterns are acquired at a grid of points on the sample, provides a versatile method for highlighting defects. Computational analysis of the diffraction patter… ▽ More Material properties strongly depend on the nature and concentration of defects. Characterizing these features may require nano- to atomic-scale resolution to establish structure-property relationships. 4D-STEM, a technique where diffraction patterns are acquired at a grid of points on the sample, provides a versatile method for highlighting defects. Computational analysis of the diffraction patterns with virtual detectors produces images that can map material properties. Here, using multislice simulations, we explore different virtual detectors that can be applied to the diffraction patterns that go beyond the binary response functions that are possible using ordinary STEM detectors. Using graphene and lead titanate as model systems, we investigate the application of virtual detectors to study local order and in particular defects. We find that using a small convergence angle with a rotationally varying detector most efficiently highlights defect signals. With experimental graphene data, we demonstrate the effectiveness of these detectors in characterizing atomic features, including vacancies, as suggested in simulations. Phase and amplitude modification of the electron beam provides another process handle to change image contrast in a 4D-STEM experiment. We demonstrate how tailored electron beams can enhance signals from short-range order and how a vortex beam can be used to characterize local symmetry. △ Less

Submitted 1 May, 2023; v1 submitted 11 November, 2022; originally announced November 2022.

Comments: 16 pages, 14 figures

Journal ref: Microscopy and Microanalysis, 2023

Develo** a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

Authors: Akshay A. Murthy, Paul Masih Das, Stephanie M. Ribet, Cameron Kopas, Jaeyel Lee, Matthew J. Reagor, Lin Zhou, Matthew J. Kramer, Mark C. Hersam, Mattia Checchin, Anna Grassellino, Roberto dos Reis, Vinayak P. Dravid, Alexander Romanenko

Abstract: Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a… ▽ More Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems. △ Less

Submitted 28 July, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: 13 pages, 4 figures

Ingrained -- An automated framework for fusing atomic-scale image simulations into experiments

Authors: Eric Schwenker, V. S. Chaitanya Kolluru, **glong Guo, Xiaobing Hu, Qiucheng Li, Mark C. Hersam, Vinayak P. Dravid, Robert F. Klie, Jeffrey R. Guest, Maria K. Y. Chan

Abstract: To fully leverage the power of image simulation to corroborate and explain patterns and structures in atomic resolution microscopy (e.g., electron and scanning probe), an initial correspondence between the simulation and experimental image must be established at the outset of further high accuracy simulations or calculations. Furthermore, if simulation is to be used in context of highly automated… ▽ More To fully leverage the power of image simulation to corroborate and explain patterns and structures in atomic resolution microscopy (e.g., electron and scanning probe), an initial correspondence between the simulation and experimental image must be established at the outset of further high accuracy simulations or calculations. Furthermore, if simulation is to be used in context of highly automated processes or high-throughput optimization, the process of finding this correspondence itself must be automated. In this work, we introduce ingrained, an open-source automation framework which solves for this correspondence and fuses atomic resolution image simulations into the experimental images to which they correspond. We describe herein the overall ingrained workflow, focusing on its application to interface structure approximations, and the development of an experimentally rationalized forward model for scanning tunneling microscopy simulation. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Spatial Map** of Electrostatics and Dynamics across 2D Heterostructures

Authors: Akshay A. Murthy, Stephanie M. Ribet, Teodor K. Stanev, Pufan Liu, Kenji Watanabe, Takashi Taniguchi, Nathaniel P. Stern, Roberto dos Reis, Vinayak P. Dravid

Abstract: In situ electron microscopy is a key tool for understanding the mechanisms driving novel phenomena in 2D structures. Unfortunately, due to various practical challenges, technologically relevant 2D heterostructures prove challenging to address with electron microscopy. Here, we use the differential phase contrast imaging technique to build a methodology for probing local electrostatic fields during… ▽ More In situ electron microscopy is a key tool for understanding the mechanisms driving novel phenomena in 2D structures. Unfortunately, due to various practical challenges, technologically relevant 2D heterostructures prove challenging to address with electron microscopy. Here, we use the differential phase contrast imaging technique to build a methodology for probing local electrostatic fields during electrical operation with nanoscale precision in such materials. We find that by combining a traditional DPC setup with a high pass filter, we can largely eliminate electric fluctuations emanating from short-range atomic potentials. With this method, a priori electric field expectations can be directly compared with experimentally derived values to readily identify inhomogeneities and potentially problematic regions. We use this platform to analyze the electric field and charge density distribution across layers of hBN and MoS2. △ Less

Submitted 22 April, 2021; v1 submitted 26 December, 2020; originally announced December 2020.

Comments: 13 pages, 4 figures

Quasi-two-dimensional heterostructures (K$M_{1-x}$Te)(LaTe$_{3}$) ($M$ = Mn, Zn) with charge density waves

Authors: **-Ke Bao, Christos D. Malliakas, Chi Zhang, Songting Cai, Haijie Chen, Alexander J. E. Rettie, Brandon L. Fisher, Duck Young Chung, Vinayak P. Dravid, Mercouri G. Kanatzidis

Abstract: Layered heterostructure materials with two different functional building blocks can teach us about emergent physical properties and phenomena arising from interactions between the layers. We report the intergrowth compounds KLa$M$$_{1-x}$Te$_{4}$ ($M$ = Mn, Zn; $x\approx$ 0.35) featuring two chemically distinct alternating layers [LaTe$_3$] and [K$M$$_{1-x}$Te]. Their crystal structures are incomm… ▽ More Layered heterostructure materials with two different functional building blocks can teach us about emergent physical properties and phenomena arising from interactions between the layers. We report the intergrowth compounds KLa$M$$_{1-x}$Te$_{4}$ ($M$ = Mn, Zn; $x\approx$ 0.35) featuring two chemically distinct alternating layers [LaTe$_3$] and [K$M$$_{1-x}$Te]. Their crystal structures are incommensurate, determined by single X-ray diffraction for the Mn compound and transmission electron microscope (TEM) study for the Zn compound. KLaMn$_{1-x}$Te$_{4}$ crystallizes in the orthorhombic superspace group $Pmnm$(01/2$γ$)$s$00 with lattice parameters $a$ = 4.4815(3) Å, $b$ = 21.6649(16) Å and $c$ = 4.5220(3) Å. It exhibits charge density wave (CDW) order at room temperature with a modulation wave vector $\mathbf{q}$ = 1/2$\mathbf{b}$* + 0.3478$\mathbf{c}$* originating from electronic instability of Te-square nets in [LaTe$_{3}$] layers. The Mn analog exhibits a cluster spin glass behavior with spin freezing temperature $T_{\mathrm{f}}$ $\approx$ 5 K attributed to disordered Mn vacancies and competing magnetic interactions in the [Mn$_{1-x}$Te] layers. The Zn analog also has charge density wave order at room temperature with a similar $\mathbf{q}$-vector having the $\mathbf{c}$* component ~ 0.346 confirmed by selected-area electron diffraction (SAED). Electron transfer from [K$M_{1-x}$Te] to [LaTe$_{3}$] layers exists in KLa$M_{1-x}$Te$_{4}$, leading to an enhanced electronic specific heat coefficient. The resistivities of KLa$M_{1-x}$Te$_{4}$ ($M$ = Mn, Zn) exhibit metallic behavior at high temperatures and an upturn at low temperatures, suggesting partial localization of carriers in the [LaTe$_{3}$] layers with some degree of disorder associated with the $M$ atom vacancies in the [$M_{1-x}$Te] layers. △ Less

Submitted 16 April, 2021; v1 submitted 22 November, 2020; originally announced November 2020.

Comments: 1 table, 10 figures, 35 pages

Journal ref: Chemistry of Materials 33(6), 2155-2164 (2021)

Lithography-free IR polarization converters via orthogonal in-plane phonons in a-MoO3 flakes

Authors: Sina Abedini Dereshgi, Thomas G. Folland, Akshay A. Murthy, Xianglian Song, Ibrahim Tanriover, Vinayak P. Dravid, Joshua D. Caldwell, Koray Aydin

Abstract: Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, a-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optica… ▽ More Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, a-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optical characteristics of cavities formed using a-MoO3 to extend the degrees of freedom in the design of IR photonic components exploiting the in-plane anisotropy of this material. Polarization-dependent absorption over 80% in a multilayer Fabry-Perot structure with a-MoO3 is reported without the need for nanoscale fabrication on the a-MoO3. We observe coupling between the a-MoO3 optical phonons and the Fabry-Perot cavity resonances. Using cross-polarized reflectance spectroscopy we show that the strong birefringence results in 15% of the total power converted into the orthogonal polarization with respect to incident wave. These findings can open new avenues in the quest for polarization filters and low-loss, integrated planar IR photonics and in dictating polarization control. △ Less

Submitted 16 October, 2020; v1 submitted 18 June, 2020; originally announced June 2020.

Nanosized Monoatomic Palladium Metallic Glass

Authors: Dong Sheng He, Yi Huang, Benjamin D. Myers, Dieter Isheim, Xinyu Fan, Yunsheng Deng, Lin Xie, Shaobo Han, Yang Qiu, Li Huang, Vinayak P. Dravid, Jiaqing He

Abstract: Physically vitrifying single-element metallic glass requires ultrahigh cooling rates, which are still unachievable for most of the closest-packed metals. Here, we report a facile synthetic strategy for creating mono-atomic palladium metallic glass nanoparticles with a purity of 99.35 +/- 0.23 at% from palladium-silicon liquid droplets using a cooling rate below 1000 K/s. In-situ environmental tran… ▽ More Physically vitrifying single-element metallic glass requires ultrahigh cooling rates, which are still unachievable for most of the closest-packed metals. Here, we report a facile synthetic strategy for creating mono-atomic palladium metallic glass nanoparticles with a purity of 99.35 +/- 0.23 at% from palladium-silicon liquid droplets using a cooling rate below 1000 K/s. In-situ environmental transmission electron microscopy directly detected the leaching of silicon. Further hydrogen absorption experiment showed that this palladium metallic glass expanded little upon hydrogen uptake, exhibiting a great potential application for hydrogen separation. Our results provide insight into the formation of mono-atomic metallic glass at nanoscale. △ Less

Submitted 4 April, 2020; originally announced April 2020.

Comments: Nano Res. (2022)

Au@MoS2@WS2 Core-Shell Architectures: A Solution to Versatile Colloidal Suspensions of 2D Heterostructures

Authors: Jennifer G. DiStefano, Akshay A. Murthy, Chamille J. Lescott, Roberto dos Reis, Yuan Li, Vinayak P. Dravid

Abstract: For years, solution processing has provided a versatile platform to extend the applications of transition metal dichalcogenides (TMDs) beyond those achievable with traditional preparation methods. However, existing solution-based synthesis and exfoliation approaches are not compatible with complex geometries, particularly when interfacial control is desired. As a result, promising TMD structures,… ▽ More For years, solution processing has provided a versatile platform to extend the applications of transition metal dichalcogenides (TMDs) beyond those achievable with traditional preparation methods. However, existing solution-based synthesis and exfoliation approaches are not compatible with complex geometries, particularly when interfacial control is desired. As a result, promising TMD structures, including MoS2/WS2 heterostructures, are barred from the rich assembly and modification opportunities possible with solution preparation. Here, we introduce a strategy that combines traditional vapor phase deposition and solution chemistry to build TMD core-shell heterostructures housed in aqueous media. We report the first synthesized TMD core-shell heterostructure, Au@MoS2@WS2, with an Au nanoparticle core and MoS2 and WS2 shells, and provide a means of suspending the structure in solution to allow for higher order patterning and ligand-based functionalization. High-resolution electron microscopy and Raman spectroscopy provide detailed analysis of the structure and interfaces of the core-shell heterostructures. UV-vis, dynamic light scattering, and zeta potential measurements exhibit the outstanding natural stability and monodispersity of Au@MoS2@WS2 in solution. As a proof of concept, the aqueous environment is utilized to both functionalize the core-shell heterostructures with electrostatic ligands and pattern them into desired configurations on a target substrate. This work harnesses the advantages of vapor phase preparation of nanomaterials and the functionality possible with aqueous suspension to expand future engineering and application opportunities of TMD heterostructures. △ Less

Submitted 26 November, 2019; originally announced November 2019.

Comments: 7 pages, 4 figures

Direct Visualization of Electric Field induced Structural Dynamics in Monolayer Transition Metal Dichalcogenides

Authors: Akshay A. Murthy, Teodor K. Stanev, Roberto dos Reis, Shiqiang Hao, Chris Wolverton, Nathaniel P. Stern, Vinayak P. Dravid

Abstract: Layered transition metal dichalcogenides (TMDs) offer many attractive features for next-generation low-dimensional device geometries. Due to the practical and fabrication challenges related to in situ methods, the atomistic dynamics that give rise to realizable macroscopic device properties are often unclear. In this study, in situ transmission electron microscopy techniques are utilized in order… ▽ More Layered transition metal dichalcogenides (TMDs) offer many attractive features for next-generation low-dimensional device geometries. Due to the practical and fabrication challenges related to in situ methods, the atomistic dynamics that give rise to realizable macroscopic device properties are often unclear. In this study, in situ transmission electron microscopy techniques are utilized in order to understand the structural dynamics at play, especially at interfaces and defects, in the prototypical film of monolayer MoS2 under electrical bias. Through our sample fabrication process, we clearly identify the presence of mass transport in the presence of a lateral electric field. In particular, we observe that the voids present at grain boundaries combine to induce structural deformation. The electric field mediates a net vacancy flux from the grain boundary interior to the exposed surface edge sites that leaves molybdenum clusters in its wake. Following the initial biasing cycles, however, the mass flow is largely diminished, and the resultant structure remains stable over repeated biasing. We believe insights from this work can help explain observations of non-uniform heating and preferential oxidation at grain boundary sites in these materials. △ Less

Submitted 11 February, 2020; v1 submitted 7 October, 2019; originally announced October 2019.

Comments: 4 figures, ACS Nano

In-Plane Mechanical Properties of Ultrathin 2D Hybrid Organic-Inorganic Perovskites

Authors: Qing Tu, Ioannis Spanopoulos, Poya Yasaei, Costas Stoumpos, Mercouri G. Kanatzidis, Gajendra S. Shekhawat, Vinayak P. Dravid

Abstract: Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are new members of the 2D materials family with wide tunability, highly dynamic structural features and excellent physical properties. Ultrathin 2D HOIPs and their heterostructures with other 2D materials have been exploited for study of new physical phenomena and novel device applications. The in-plane mechanical properties of 2D u… ▽ More Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are new members of the 2D materials family with wide tunability, highly dynamic structural features and excellent physical properties. Ultrathin 2D HOIPs and their heterostructures with other 2D materials have been exploited for study of new physical phenomena and novel device applications. The in-plane mechanical properties of 2D ultrathin HOIPs are critical for understanding the coupling between mechanical and other physical fields and for integrated devices applications. Here we report for the first time the in-plane mechanical properties of ultrathin freestanding 2D lead iodide perovskite membranes and their dependence on the membrane thickness. The in-plane Young's moduli of 2D HOIPs are smaller than that of conventional covalently bonded 2D materials. Both the Young's modulus and breaking strength first decrease and then plateau as the thickness increases from monolayer to 4 layers due to interlayer slippage during deformation. Our results show that ultrathin 2D HOIPs exhibit outstanding breaking strength/Young's Modulus ratio compared to many other widely used engineering materials and polymeric flexible substrates, which renders them suitable for application into flexible electronic devices. △ Less

Submitted 12 June, 2018; originally announced June 2018.

Windowless Observation of Evaporation-Induced Coarsening of Au-Pt Nanoparticles in Polymer Nanoreactors

Authors: **gshan S. Du, Peng-Cheng Chen, Brian Meckes, Edward J. Kluender, Zhuang Xie, Vinayak P. Dravid, Chad A. Mirkin

Abstract: The interactions between nanoparticles and solvents play a critical role in the formation of complex, metastable nanostructures. However, direct observation of such interactions with high spatial and temporal resolution is challenging with conventional liquid-cell transmission electron microscopy (TEM) experiments. Here, a windowless system consisting of polymer nanoreactors deposited via scanning… ▽ More The interactions between nanoparticles and solvents play a critical role in the formation of complex, metastable nanostructures. However, direct observation of such interactions with high spatial and temporal resolution is challenging with conventional liquid-cell transmission electron microscopy (TEM) experiments. Here, a windowless system consisting of polymer nanoreactors deposited via scanning probe block copolymer lithography (SPBCL) on an amorphous carbon film is used to investigate the coarsening of ultrafine (1-3 nm) Au-Pt bimetallic nanoparticles as a function of solvent evaporation. In such reactors, homogeneous Au-Pt nanoparticles are synthesized from metal ion precursors in situ under electron irradiation. The non-uniform evaporation of the thin polymer film not only concentrates the nanoparticles, but also accelerates the coalescence kinetics at the receding polymer edges. Qualitative analysis of the particle forces influencing coalescence suggests that capillary dragging by the polymer edges plays a significant role in accelerating this process. Taken together, this work: 1) provides fundamental insight into the role of solvents in the chemistry and coarsening behavior of nanoparticles during the synthesis of polyelemental nanostructures, 2) provides insight into how particles form via the SPBCL process, and 3) shows how SPBCL-generated domes, instead of liquid cells, can be used to study nanoparticle formation. More generally, it shows why conventional models of particle coarsening, which do not take into account solvent evaporation, cannot be used to describe what is occurring in thin film, liquid-based syntheses of nanostructures. △ Less

Submitted 1 June, 2018; originally announced June 2018.

Comments: 27 pages, 6 figures. Accepted for publication in JACS

Journal ref: J. Am. Chem. Soc. 2018, 140 (23), 7213-7221

Out-of-Plane Mechanical Properties of 2D Hybrid Organic-Inorganic Perovskites by Nanoindentation

Authors: Qing Tu, Ioannis Spanopoulos, Shiqiang Hao, Christopher Wolverton, Mercouri G. Kanatzidis, Gajendra S. Shekhawat, Vinayak P. Dravid

Abstract: 2D layered hybrid organic-inorganic perovskites (HOIPs) have demonstrated improved stability and promising photovoltaic performance. The mechanical properties of such functional materials are both fundamentally and practically important to achieve both high performance and mechanical stable (flexible) devices. Here we report the mechanical properties of a series of 2D layered lead iodide HOIPs and… ▽ More 2D layered hybrid organic-inorganic perovskites (HOIPs) have demonstrated improved stability and promising photovoltaic performance. The mechanical properties of such functional materials are both fundamentally and practically important to achieve both high performance and mechanical stable (flexible) devices. Here we report the mechanical properties of a series of 2D layered lead iodide HOIPs and investigate the role of structural sub-units (e.g., variation of the length of the organic spacer molecules -R and the number of inorganic layer -n) on the mechanical properties. While 2D HOIPs have much lower nominal elastic moduli and hardness than 3D HOIPs, larger n number and shorter R lead to stiffer materials. DFT simulations showed a similar trend to the experimental results. We compared these findings with other 2D layered crystals and shed light on routes to further tune the out-of-plane mechanical properties of 2D layered HOIPs. △ Less

Submitted 7 June, 2018; v1 submitted 29 March, 2018; originally announced March 2018.

Multi-Stage Transformation and Lattice Fluctuation at AgCl-Ag Interface

Authors: **gshan S. Du, Jungwon Park, QHwan Kim, Wonho Jhe, Vinayak P. Dravid, Deren Yang, David A. Weitz

Abstract: Solid-state transformation is often accompanied by mechanical expansion/compression, due to their volume change and structural evolution at interfaces at the atomic scale. However, these two types of dynamics are usually difficult to monitor in the same time. In this work, we use in-situ transmission electron microscopy to directly study the reduction transformation at the AgCl-Ag interface. Three… ▽ More Solid-state transformation is often accompanied by mechanical expansion/compression, due to their volume change and structural evolution at interfaces at the atomic scale. However, these two types of dynamics are usually difficult to monitor in the same time. In this work, we use in-situ transmission electron microscopy to directly study the reduction transformation at the AgCl-Ag interface. Three stages of lattice fluctuations were identified and correlated to the structural evolution. During the steady state, a quasi-layered growth mode of Ag in both vertical and lateral directions were observed due to the confinement of AgCl lattices. The development of planar defects and depletion of AgCl are respectively associated with lattice compression and relaxation. Topography and structure of decomposing AgCl was further monitored by in-situ scanning transmission electron microscopy. Silver species are suggested to originate from both the surface and the interior of AgCl, and be transported to the interface. Such mass transport may have enabled the steady state and lattice compression in this volume-shrinking transformation. △ Less

Submitted 13 November, 2017; originally announced November 2017.

Comments: 21 pages, 5 figures; accepted for publication in J. Phys. Chem. Lett

Journal ref: J. Phys. Chem. Lett. 2017, 8 (23), 5853-5860

The Structural Fate of Individual Multicomponent Metal-Oxide Nanoparticles in Polymer Nanoreactors

Authors: **gshan S. Du, Peng-Cheng Chen, Brian Meckes, Zhuang Xie, **ghan Zhu, Yuan Liu, Vinayak P. Dravid, Chad A. Mirkin

Abstract: Multicomponent nanoparticles can be synthesized with either homogeneous or phase-segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal-oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized via scanning probe block copolymer lithography and characte… ▽ More Multicomponent nanoparticles can be synthesized with either homogeneous or phase-segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal-oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized via scanning probe block copolymer lithography and characterized using correlated electron microscopy. These studies revealed that the miscibility, ratio of the metallic components, and the synthesis temperature determine the crystal structure and architecture of the nanoparticles. A Co-Ni-O system forms a rock salt structure largely due to the miscibility of CoO and NiO, while Cu-Ni-O, which has large miscibility gaps, forms either homogeneous oxides, heterojunctions, or alloys depending on the annealing temperature and composition. Moreover, a higher ordered structure, Co-Ni-Cu-O, was found to follow the behavior of lower ordered systems. △ Less

Submitted 17 June, 2017; v1 submitted 16 May, 2017; originally announced May 2017.

Comments: 7 pages, 3 figures, 1 scheme. Accepted for publication in Angewandte Chemie

Journal ref: Angew. Chem. Int. Ed. 2017, 56, 7625

Valley-Polarized Exciton-Polaritons in a Monolayer Semiconductor

Authors: Yen-Jung Chen, Jeffrey D. Cain, Teodor K. Stanev, Vinayak P. Dravid, Nathaniel P. Stern

Abstract: Single layers of transition metal dichalcogenides are two-dimensional direct bandgap semiconductors with degenerate, but inequivalent, `valleys' in the electronic structure that can be selectively excited by polarized light. Coherent superpositions of light and matter, exciton-polaritons, have been observed when these materials are strongly coupled to photons, but these hybrid quasiparticles do no… ▽ More Single layers of transition metal dichalcogenides are two-dimensional direct bandgap semiconductors with degenerate, but inequivalent, `valleys' in the electronic structure that can be selectively excited by polarized light. Coherent superpositions of light and matter, exciton-polaritons, have been observed when these materials are strongly coupled to photons, but these hybrid quasiparticles do not harness the valley-sensitive excitations of monolayer transition metal dichalcogenides. Here, we demonstrate evidence for valley polarized exciton-polaritons in monolayers of MoS$_2$ embedded in a dielectric microcavity. Unlike traditional microcavity exciton-polaritons, these light-matter quasiparticles emit polarized light with spectral Rabi splitting. The interplay of cavity-modified exciton dynamics and intervalley relaxation in the high-cooperativity regime causes valley polarized exciton-polaritons to persist to room temperature, distinct from the vanishing polarization in bare monolayers. Achieving polarization-sensitive polaritonic devices operating at room temperature presents a pathway for manipulating novel valley degrees of freedom in coherent states of light and matter. △ Less

Submitted 19 January, 2017; originally announced January 2017.

Comments: 8 pages, 4 figures, and Supplementary Information

Journal ref: Nature Photonics, 11, 431-435 (2017)

Two Band Model Interpretation of the p to n Transition in Ternary Tetradymite Topological Insulators

Authors: T. C. Chasapis, D. Koumoulis, B. Leung, N. P. Calta, S. -H Lo, V. P. Dravid, L. S. Bouchard, M. G. Kanatzidis

Abstract: The requirement for large bulk resistivity in topological insulators has led to the design of complex ternary and quaternary phases with balanced donor and acceptor levels. A common feature of the optimized phases is that they lie close to the p to n transition. The tetradymite Bi2Te3_xSex system exhibits minimum bulk conductance at the ordered composition Bi2Te2Se. By combining local and integral… ▽ More The requirement for large bulk resistivity in topological insulators has led to the design of complex ternary and quaternary phases with balanced donor and acceptor levels. A common feature of the optimized phases is that they lie close to the p to n transition. The tetradymite Bi2Te3_xSex system exhibits minimum bulk conductance at the ordered composition Bi2Te2Se. By combining local and integral measurements of the density of states, we find that the point of minimum electrical conductivity at x=1.0 where carriers change from hole-like to electron-like is characterized by conductivity of the mixed type. Our experimental findings, which are interpreted within the framework of a two band model for the different carrier types, indicate that the mixed state originates from different type of native defects that strongly compensate at the crossover point. △ Less

Submitted 17 June, 2015; originally announced June 2015.

Influence of Stoichiometry on the Optical and Electrical Properties of Chemical Vapor Deposition Derived MoS$_{2}$

Authors: In Soo Kim, Vinod K. Sangwan, Deep Jariwala, Joshua D. Wood, Spencer Park, Kan-Sheng Chen, Fengyuan Shi, Francisco Ruiz-Zepeda, Arturo Ponce, Miguel Jose-Yacaman, Vinayak P. Dravid, Tobin J. Marks, Mark C. Hersam, Lincoln J. Lauhon

Abstract: Ultrathin transition metal dichalcogenides (TMDCs) of Mo and W show great potential for digital electronics and optoelectronic applications. Whereas early studies were limited to mechanically exfoliated flakes, the large-area synthesis of 2D TMDCs has now been realized by chemical vapor deposition (CVD) based on a sulfurization reaction. Since then, the optoelectronic properties of CVD grown monol… ▽ More Ultrathin transition metal dichalcogenides (TMDCs) of Mo and W show great potential for digital electronics and optoelectronic applications. Whereas early studies were limited to mechanically exfoliated flakes, the large-area synthesis of 2D TMDCs has now been realized by chemical vapor deposition (CVD) based on a sulfurization reaction. Since then, the optoelectronic properties of CVD grown monolayer MoS$_{2}$ have been heavily investigated, but the influence of stoichiometry on the electrical and optical properties has been largely overlooked. Here we systematically vary the stoichiometry of monolayer MoS$_{2}$ during CVD via controlled sulfurization and investigate the associated changes in photoluminescence and electrical properties. X-ray photoelectron spectroscopy is employed to measure relative variations in stoichiometry and the persistence of MoO$_{x}$ species. As MoS$_{2-δ}$ is reduced (increasing δ), the field-effect mobility of monolayer transistors increases while the photoluminescence yield becomes non-uniform. Devices fabricated from monolayers with the lowest sulfur content have negligible hysteresis and a threshold voltage of ~0 V. We conclude that the electrical and optical properties of monolayer MoS$_{2}$ crystals can be tuned via stoichiometry engineering to meet the requirements of various applications. △ Less

Submitted 17 September, 2014; originally announced September 2014.

Band-Like Transport in High Mobility Unencapsulated Single-Layer MoS2 Transistors

Authors: Deep Jariwala, Vinod K. Sangwan, Dattatray J. Late, James E. Johns, Vinayak P. Dravid, Tobin J. Marks, Lincoln J. Lauhon, Mark C. Hersam

Abstract: Ultra-thin MoS2 has recently emerged as a promising two-dimensional semiconductor for electronic and optoelectronic applications. Here, we report high mobility (>60 cm2/Vs at room temperature) field-effect transistors that employ unencapsulated single-layer MoS2 on oxidized Si wafers with a low level of extrinsic contamination. While charge transport in the sub-threshold regime is consistent with… ▽ More Ultra-thin MoS2 has recently emerged as a promising two-dimensional semiconductor for electronic and optoelectronic applications. Here, we report high mobility (>60 cm2/Vs at room temperature) field-effect transistors that employ unencapsulated single-layer MoS2 on oxidized Si wafers with a low level of extrinsic contamination. While charge transport in the sub-threshold regime is consistent with a variable range hop** model, monotonically decreasing field-effect mobility with increasing temperature suggests band-like transport in the linear regime. At temperatures below 100 K, temperature-independent mobility is limited by Coulomb scattering, whereas, at temperatures above 100 K, phonon-limited mobility decreases as a power law with increasing temperature. △ Less

Submitted 19 April, 2013; originally announced April 2013.

Ultraviolet photonic crystal laser

Authors: X. Wu, A. Yamilov, X. Liu, S. Li, V. P. Dravid, R. P. H. Chang, H. Cao

Abstract: We fabricated two dimensional photonic crystal structures in zinc oxide films with focused ion beam etching. Lasing is realized in the near ultraviolet frequency at room temperature under optical pum**. From the measurement of lasing frequency and spatial profile of the lasing modes, as well as the photonic band structure calculation, we conclude that lasing occurs in the strongly localized de… ▽ More We fabricated two dimensional photonic crystal structures in zinc oxide films with focused ion beam etching. Lasing is realized in the near ultraviolet frequency at room temperature under optical pum**. From the measurement of lasing frequency and spatial profile of the lasing modes, as well as the photonic band structure calculation, we conclude that lasing occurs in the strongly localized defect modes near the edges of photonic band gap. These defect modes originate from the structure disorder unintentionally introduced during the fabrication process. △ Less

Submitted 1 June, 2004; originally announced June 2004.

Comments: 4 pages, 4 figures

Journal ref: Applied Physics Letters 85, 3657 (2004)

Origin of room temperature ferromagnetism in homogeneous (In,Mn)As thin films

Authors: A. J. Blattner, P. L. Prabhumirashi, V. P. Dravid, B. W. Wessels

Abstract: The microstructure of (In,Mn)As thin films grown using metalorganic vapor phase epitaxy (MOVPE) was investigated to determine the origin of room temperature ferromagnetism in these films. Transmission electron microscopy (TEM) based techniques were used to investigate phase purity and compositional homogeneity. Microanalysis of an In1-xMnxAs film with x = 0.01 and a Curie temperature of 330 K ex… ▽ More The microstructure of (In,Mn)As thin films grown using metalorganic vapor phase epitaxy (MOVPE) was investigated to determine the origin of room temperature ferromagnetism in these films. Transmission electron microscopy (TEM) based techniques were used to investigate phase purity and compositional homogeneity. Microanalysis of an In1-xMnxAs film with x = 0.01 and a Curie temperature of 330 K exhibited a homogeneous distribution of Mn. High Mn concentration films with x = 0.20 exhibited MnAs precipitates within the (In,Mn)As matrix. The analysis indicates that room temperature ferromagnetic, single-phase (In,Mn)As can be formed by MOVPE. The origin of ferromagnetism is attributed to (In,Mn)As solid solution rather than distinct secondary Mn-rich magnetic phase(s). △ Less

Submitted 6 October, 2003; originally announced October 2003.

Comments: In press in J. Crystal Growth

Momentum-Dependent Charge Transfer Excitations in Sr2CuO2Cl2 - Angle Resolved Electron Energy Loss Spectroscopy

Authors: Y. Y. Wang, F. C. Zhang, V. P. Dravid, K. K. Ng, M. V. Klein, S. E. Schnatterly, L. L. Miller

Abstract: Electron-hole pair excitations in the insulating cuprates $Sr_2CuO_2Cl_2$ were investigated by angle-resolved electron energy loss spectroscopy. The optically allowed and optically forbidden transitions were observed to be strongly anisotropic in $Cu-O_2$ plane. The former show a large energy dispersion $\sim 1.5$eV along [110], and the latter appear at a higher energy position ($\sim 4.5$eV) on… ▽ More Electron-hole pair excitations in the insulating cuprates $Sr_2CuO_2Cl_2$ were investigated by angle-resolved electron energy loss spectroscopy. The optically allowed and optically forbidden transitions were observed to be strongly anisotropic in $Cu-O_2$ plane. The former show a large energy dispersion $\sim 1.5$eV along [110], and the latter appear at a higher energy position ($\sim 4.5$eV) only along [100], but not along [110]. We interpret these results as transitions involving excitons. A small exciton model is examined to explain both the observed features. △ Less

Submitted 10 June, 1996; originally announced June 1996.

Comments: 11 pages, RevTex, 3 Postscript figures