-
Dynamic Control of Spontaneous Emission Using Magnetized InSb Higher-Order-Mode Antennas
Authors:
Sina Aghili,
Rasoul Alaee,
Amirreza Ahmadnejad,
Ehsan Mobini,
Mohamadreza Mohamadpour,
Carsten Rockstuhl,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
We exploit InSb's magnetic-induced optical properties to propose THz sub-wavelength antenna designs that actively tune the radiative decay rates of dipole emitters at their proximity. The proposed designs include a spherical InSb antenna and a cylindrical Si-InSb hybrid antenna that demonstrate distinct behaviors; the former dramatically enhances both radiative and non-radiative decay rates in the…
▽ More
We exploit InSb's magnetic-induced optical properties to propose THz sub-wavelength antenna designs that actively tune the radiative decay rates of dipole emitters at their proximity. The proposed designs include a spherical InSb antenna and a cylindrical Si-InSb hybrid antenna that demonstrate distinct behaviors; the former dramatically enhances both radiative and non-radiative decay rates in the epsilon-near-zero region due to the dominant contribution of the Zeeman splitting electric octupole mode. The latter realizes significant radiative decay rate enhancement via magnetic octupole mode, mitigating the quenching process and accelerating the photon production rate. A deep learning-based optimization of emitter positioning further enhances the quantum efficiency of the proposed hybrid system. These novel mechanisms are potentially promising for tunable THz single-photon sources in integrated quantum networks.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Hybrid THz architectures for molecular polaritonics
Authors:
Ahmed Jaber,
Michael Reitz,
Avinash Singh,
Ali Maleki,
Yongbao Xin,
Brian Sullivan,
Ksenia Dolgaleva,
Robert W. Boyd,
Claudiu Genes,
Jean-Michel Ménard
Abstract:
Physical and chemical properties of materials can be modified by a resonant optical mode. Such recent demonstrations have mostly relied on a planar cavity geometry, others have relied on a plasmonic resonator. However, the combination of these two device architectures have remained largely unexplored, especially in the context of maximizing light-matter interactions. Here, we investigate several s…
▽ More
Physical and chemical properties of materials can be modified by a resonant optical mode. Such recent demonstrations have mostly relied on a planar cavity geometry, others have relied on a plasmonic resonator. However, the combination of these two device architectures have remained largely unexplored, especially in the context of maximizing light-matter interactions. Here, we investigate several schemes of electromagnetic field confinement aimed at facilitating the collective coupling of a localized photonic mode to molecular vibrations in the terahertz region. The key aspects are the use of metasurface plasmonic structures combined with standard Fabry-Perot configurations and the deposition of a thin layer of glucose, via a spray coating technique, within a tightly focused electromagnetic mode volume. More importantly, we demonstrate enhanced vacuum Rabi splittings reaching up to 200 GHz when combining plasmonic resonances, photonic cavity modes and low-energy molecular resonances. Furthermore, we demonstrate how a cavity mode can be utilized to enhance the zero-point electric field amplitude of a plasmonic resonator. Our study provides key insight into the design of polaritonic platforms with organic molecules to harvest the unique properties of hybrid light-matter states.
△ Less
Submitted 25 May, 2024; v1 submitted 7 April, 2023;
originally announced April 2023.
-
Post-2000 Nonlinear Optical Materials and Measurements: Data Tables and Best Practices
Authors:
Nathalie Vermeulen,
Daniel Espinosa,
Adam Ball,
John Ballato,
Philippe Boucaud,
Georges Boudebs,
Cecilia L. A. V. Campos,
Peter Dragic,
Anderson S. L. Gomes,
Mikko J. Huttunen,
Nathaniel Kinsey,
Rich Mildren,
Dragomir Neshev,
Lazaro Padilha,
Minhao Pu,
Ray Secondo,
Eiji Tokunaga,
Dmitry Turchinovich,
**gshi Yan,
Kresten Yvind,
Ksenia Dolgaleva,
Eric W. Van Stryland
Abstract:
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are represen…
▽ More
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are representative experimental works on bulk materials, solvents, 0D-1D-2D materials, metamaterials, fiber waveguiding materials, on-chip waveguiding materials, hybrid waveguiding systems, and materials suitable for nonlinear optics at THz frequencies. In addition to the data tables, we also provide best practices for performing and reporting nonlinear-optical experiments. These best practices underpin the selection process that was used for including papers in the tables. While the tables indeed show strong advancements in the field over the past two decades, we encourage the nonlinear-optics community to implement the identified best practices in future works. This will allow a more adequate comparison, interpretation and use of the published parameters, and as such further stimulate the overall progress in nonlinear-optical science and applications.
△ Less
Submitted 21 May, 2023; v1 submitted 15 January, 2023;
originally announced January 2023.
-
Extremely large nonlinear response in crystalline quartz at THz frequencies
Authors:
Soheil Zibod,
Payman Rasekh,
Murat Yildrim,
Wei Cui,
Ravi Bhardwaj,
Jean-Michel Ménard,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
We report on the first experimental observation of a very strong nonlinear response in crystalline quartz in the terahertz (THz) frequency region through THz time-domain spectroscopy (THz-TDS). Theoretical modelling is presented and predicts a Kerr coefficient n2 equal to 5.17*10^-14 m^2 W^-1. The time-domain analysis of the measured data shows that with increasing of the THz peak amplitude, the p…
▽ More
We report on the first experimental observation of a very strong nonlinear response in crystalline quartz in the terahertz (THz) frequency region through THz time-domain spectroscopy (THz-TDS). Theoretical modelling is presented and predicts a Kerr coefficient n2 equal to 5.17*10^-14 m^2 W^-1. The time-domain analysis of the measured data shows that with increasing of the THz peak amplitude, the pulse experiences a larger time delay in the sample. As the THz amplitude increases to values higher than 110 kV cm^-1, the growth rate of the delay decreases, indicating a saturation process. The value of the nonlinear refractive index calculated through the frequency response analysis is estimated to be on the order of 10^-13 m^2 W^-1, which is several orders of magnitude larger than typical values of the nonlinear refractive index of solids in the visible region. Furthermore, a negative fifth-order susceptibility on the order of 10^-30 m^4 V^-4 is measured.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
A two-dimensional space-time terahertz memory in bulk SrTiO3
Authors:
F. Blanchard,
J. E. Nkeck,
L. Guiramand,
S. Zibod,
K. Dolgaleva,
T. Arikawa,
K. Tanaka
Abstract:
Ferroelectric materials offer unprecedented ultrafast responses and are of great interest for the development of new polarizable media under the influence of an electromagnetic field. Recent research efforts have demonstrated the role of optical excitation and intense terahertz (THz) pulses in inducing a polar order and revealing a hidden phase transition in SrTiO3 (STO), respectively. Here we sho…
▽ More
Ferroelectric materials offer unprecedented ultrafast responses and are of great interest for the development of new polarizable media under the influence of an electromagnetic field. Recent research efforts have demonstrated the role of optical excitation and intense terahertz (THz) pulses in inducing a polar order and revealing a hidden phase transition in SrTiO3 (STO), respectively. Here we show that the surface of STO crystals at room temperature act as ultrafast sensors that enable sub-picosecond switching through the Kerr effect and multi-ps recording of polar THz intensity with spatial resolution below the diffraction limit through dipole alignment relaxation. The contrast sensitivity and spatial resolution achieved by in the STO sensor are significantly superior to those of present-day near-field THz sensors based on the linear Pockels effect, and more importantly, its ability to remain polarized for several picoseconds opens the door to a new strategy for building an ultrafast space-time THz memory.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Fourier-Engineered Plasmonic Lattice Resonances
Authors:
Theng-Loo Lim,
Yaswant Vaddi,
M. Saad Bin-Alam,
Lin Cheng,
Rasoul Alaee,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Orad Reshef,
Robert W. Boyd
Abstract:
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the c…
▽ More
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the concept of Fourier lattice resonances (FLRs) in which multiple desired resonances can be chosen a priori and used to dictate the metasurface design. Because each resonance is supported by a distinct surface lattice mode, each can have a high quality factor. Here, we experimentally demonstrate several metasurfaces with arbitrarily placed resonances (e.g., at 1310 and 1550 nm) and Q-factors as high as 800 in a plasmonic platform. This flexible procedure requires only the computation of a single Fourier transform for its design, and is based on standard lithographic fabrication methods, allowing one to design and fabricate a metasurface to fit any specific, optical-cavity-based application. This work represents an important milestone towards the complete control over the transmission spectrum of a metasurface.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Cross-polarized surface lattice resonances in a rectangular lattice plasmonic metasurface
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Raja Naeem Ahmad,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree…
▽ More
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree of freedom where different lattice modes propagate along different dimensions of the lattice. The surface consists of aluminum nanostructures in a rectangular periodic lattice. The resulting surface lattice resonances were measured around 630 nm and 1160 nm with Q-factors of ~50 and ~800, respectively. The latter is a record-high plasmonic Q-factor within the near-infrared type-II window. Such metasurfaces could benefit applications such as frequency conversion and all-optical switching.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Geometry-dependent two-photon absorption followed by free-carrier absorption in AlGaAs waveguides
Authors:
Daniel H. G. Espinosa,
Stephen R. Harrigan,
Kashif M. Awan,
Payman Rasekh,
Ksenia Dolgaleva
Abstract:
Nonlinear absorption can limit the efficiency of nonlinear optical devices. However, it can also be exploited for optical limiting or switching applications. Thus, characterization of nonlinear absorption in photonic devices is imperative. This work used the nonlinear transmittance technique to measure the two-photon absorption coefficients ($α_2$) of AlGaAs waveguides in the strip-loaded, nanowir…
▽ More
Nonlinear absorption can limit the efficiency of nonlinear optical devices. However, it can also be exploited for optical limiting or switching applications. Thus, characterization of nonlinear absorption in photonic devices is imperative. This work used the nonlinear transmittance technique to measure the two-photon absorption coefficients ($α_2$) of AlGaAs waveguides in the strip-loaded, nanowire, and half-core geometries in the wavelength range from $1480$ to $1560~\text{nm}$. The highest $α_2$ values of $2.4$, $2.3$, and $1.1~\text{cm}/\text{GW}$ were measured at $1480~\text{nm}$ for a $0.8$-nm-wide half-core, $0.6$-nm-wide nanowire, and $0.9$-nm-wide strip-loaded waveguides, respectively, with $α_2$ decreasing with increasing wavelength. The free-carrier absorption cross-section was also estimated from the nonlinear transmittance data to be around $2.2\times10^{-16}~\text{cm}^2$ for all three geometries. Our results contribute to a better understanding of the nonlinear absorption in heterostructure waveguides of different cross-sectional geometries. We discuss how the electric field distribution in the different layers of a heterostructure can lead to geometry-dependent effective two-photon absorption coefficients. More specifically, we pinpoint the third-order nonlinear confinement factor as a design parameter to estimate the strength of the effective nonlinear absorption, in addition to tailoring the bandgap energy by varying material composition.
△ Less
Submitted 26 October, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Giant asymmetric second-harmonic generation in bianisotropic metasurfaces based on bound states in the continuum
Authors:
Ehsan Mobini,
Rasoul Alaee,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Bianisotropy is a powerful concept enabling asymmetric optical response, including asymmetric reflection, absorption, optical forces, light trap**, and lasing. The physical origin of these asymmetric effects can be understood from magnetoelectric coupling and asymmetrical field enhancement. Here, we theoretically propose highly asymmetric second-harmonic generation (SHG) in bianisotropic AlGaAs…
▽ More
Bianisotropy is a powerful concept enabling asymmetric optical response, including asymmetric reflection, absorption, optical forces, light trap**, and lasing. The physical origin of these asymmetric effects can be understood from magnetoelectric coupling and asymmetrical field enhancement. Here, we theoretically propose highly asymmetric second-harmonic generation (SHG) in bianisotropic AlGaAs metasurfaces. We show that around four orders of magnitude second-harmonic power difference for the forward and backward illuminations can be obtained by altering geometrical parameters that coincide with quasi-bound states in the continuum. Our study paves the way towards a directional generation of higher-order waves and can be potentially useful for nonlinear holograms.
△ Less
Submitted 6 July, 2021;
originally announced July 2021.
-
Relaxed phase-matching constraints in zero-index waveguides
Authors:
Justin R. Gagnon,
Orad Reshef,
Daniel H. G. Espinosa,
M. Zahirul Alam,
Daryl I. Vulis,
Erik N. Knall,
Jeremy Upham,
Yang Li,
Ksenia Dolgaleva,
Eric Mazur,
Robert W. Boyd
Abstract:
The nonlinear optical response of materials is the foundation upon which applications such as frequency conversion, all-optical signal processing, molecular spectroscopy, and nonlinear microscopy are built. However, the utility of all such parametric nonlinear optical processes is hampered by phase-matching requirements. Quasi-phase-matching, birefringent phase matching, and higher-order-mode phas…
▽ More
The nonlinear optical response of materials is the foundation upon which applications such as frequency conversion, all-optical signal processing, molecular spectroscopy, and nonlinear microscopy are built. However, the utility of all such parametric nonlinear optical processes is hampered by phase-matching requirements. Quasi-phase-matching, birefringent phase matching, and higher-order-mode phase matching have all been developed to address this constraint, but the methods demonstrated to date suffer from the inconvenience of only being phase-matched for a single, specific arrangement of beams, typically co-propagating, resulting in cumbersome experimental configurations and large footprints for integrated devices. Here, we experimentally demonstrate that these phase-matching requirements may be satisfied in a parametric nonlinear optical process for multiple, if not all, configurations of input and output beams when using low-index media. Our measurement constitutes the first experimental observation of direction-independent phase matching for a medium sufficiently long for phase matching concerns to be relevant. We demonstrate four-wave mixing from spectrally distinct co- and counter-propagating pump and probe beams, the backward-generation of a nonlinear signal, and excitation by an out-of-plane probe beam. These results explicitly show that the unique properties of low-index media relax traditional phase-matching constraints, which can be exploited to facilitate nonlinear interactions and miniaturize nonlinear devices, thus adding to the established exceptional properties of low-index materials.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Hyperpolarizability of plasmonic meta-atoms in metasurfaces
Authors:
M. Saad Bin-Alam,
Joshua Baxter,
Kashif M. Awan,
Antti Kiviniemi,
Yaryna Mamchur,
Antonio Cala' Lesina,
Kosmas L. Tsakmakidis,
Mikko J. Huttunen,
Lora Ramunno,
Ksenia Dolgaleva
Abstract:
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (…
▽ More
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (hyperpolarizabilities) of the meta-atoms hindering designing of nonlinear metasurfaces. Here, we develop the equivalent RLC circuit model of such meta-atoms to estimate their second-order nonlinear optical parameter i.e. the first-order hyperpolarizability in the optical spectral range. In parallel, we extract from second-harmonic generation experiments the spectrum of the 1st-order hyperpolarizabilities of individual meta-atoms consisting of asymmetrically shaped (elongated) plasmonic nanoprisms. Moreover, we verify our results using nonlinear hydrodynamic-FDTD and with calculations based on nonlinear scattering theory. All three approaches: analytical, experimental, and computational, yield results that agree very well. Our empirical RLC model can thus be used as a simple tool to enable efficient design of nonlinear plasmonic metasurfaces.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Tunable Four-Wave Mixing in AlGaAs Waveguides of Three Different Geometries
Authors:
Daniel H. G. Espinosa,
Kashif M. Awan,
Mfon Odungide,
Stephen R. Harrigan,
David R. Sanchez J.,
Ksenia Dolgaleva
Abstract:
The AlGaAs material platform has been intensively used to develop nonlinear photonic devices on-a-chip, thanks to its superior nonlinear optical properties. We propose a new AlGaAs waveguide geometry, called half-core etched, which represents a compromise between two previously studied geometries, namely the nanowire and strip-loaded waveguides, combining their best qualities. We performed tunable…
▽ More
The AlGaAs material platform has been intensively used to develop nonlinear photonic devices on-a-chip, thanks to its superior nonlinear optical properties. We propose a new AlGaAs waveguide geometry, called half-core etched, which represents a compromise between two previously studied geometries, namely the nanowire and strip-loaded waveguides, combining their best qualities. We performed tunable four-wave mixing (FWM) experiments in all three of these geometries in the telecommunications C-band (wavelengths around 1550 nm), with a pulsed pump beam and a continuous-wave (CW) signal beam. The maximum FWM peak efficiencies achieved in the nanowire, strip-loaded and half-core geometries were about -5 dB, -8 dB and -9 dB, respectively. These values are among the highest reported in AlGaAs waveguides. The signal-to-idler conversion ranges were also remarkable: 161 nm for the strip-loaded and half-core waveguides and 152 nm for the nanowire. Based on our findings, we conclude that the half-core geometry is an alternative approach to the nanowire geometry, which has been earlier deemed the most efficient geometry, to perform wavelength conversion in the spectral region above the half-bandgap. Moreover, we show that the half-core geometry exhibits fewer issues associated with multiphoton absorption than the nanowire geometry.
△ Less
Submitted 11 September, 2020; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Terahertz Nonlinear Optical Response of Water Vapor
Authors:
Payman Rasekh,
Akbar Safari,
Murat Yildirim,
Ravi Bhardwaj,
Jean-Michel Ménard,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
We report on the nonlinear spectroscopy of water vapor at THz frequencies. Atmospheric water vapor has a rich spectrum with several strong resonances at frequencies below 3 THz, falling within the range of operation of most existing THz sources. We observe an extremely large nonlinear response to THz radiation at the positions of these resonances. Using the optical Kerr model for the nonlinear res…
▽ More
We report on the nonlinear spectroscopy of water vapor at THz frequencies. Atmospheric water vapor has a rich spectrum with several strong resonances at frequencies below 3 THz, falling within the range of operation of most existing THz sources. We observe an extremely large nonlinear response to THz radiation at the positions of these resonances. Using the optical Kerr model for the nonlinear response, we estimate a minimum nonlinear refractive index of the order of 10^2 m^2/W. Our results provide insight into the energy levels of the water molecule and give a more accurate picture of its response to electromagnetic radiation, paving the way to more accurate THz spectroscopy, imaging and sensing systems, and thereby facilitating future emerging THz technologies.
△ Less
Submitted 8 June, 2020;
originally announced June 2020.
-
Ultra-high-Q resonances in plasmonic metasurfaces
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Yaryna Mamchur,
M. Zahirul Alam,
Graham Carlow,
Jeremy Upham,
Brian T. Sullivan,
Jean-Michel Ménard,
Mikko J. Huttunen,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g.…
▽ More
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g., dielectrics) that provide weaker field enhancement, but more tolerable losses. Here, we report a plasmonic metasurface with a quality-factor (Q-factor) of 2340 in the telecommunication C band by exploiting surface lattice resonances (SLRs), exceeding the record by an order of magnitude. Additionally, we show that SLRs retain many of the same benefits as localized plasmonic resonances, such as field enhancement and strong confinement of light along the metal surface. Our results demonstrate that SLRs provide an exciting and unexplored method to tailor incident light fields, and could pave the way to flexible wavelength-scale devices for any optical resonating application.
△ Less
Submitted 24 February, 2021; v1 submitted 10 April, 2020;
originally announced April 2020.
-
Multi-resonant high-Q plasmonic metasurfaces
Authors:
Orad Reshef,
Md Saad-Bin-Alam,
Mikko J. Huttunen,
Graham Carlow,
Brian T. Sullivan,
Jean-Michel Ménard,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
Resonant metasurfaces are devices composed of nanostructured sub-wavelength scatterers that generate narrow optical resonances, enabling applications in filtering, nonlinear optics, and molecular fingerprinting. It is highly desirable for these applications to incorporate such devices with multiple, high-quality-factor resonances; however, it can be challenging to obtain more than a pair of narrow…
▽ More
Resonant metasurfaces are devices composed of nanostructured sub-wavelength scatterers that generate narrow optical resonances, enabling applications in filtering, nonlinear optics, and molecular fingerprinting. It is highly desirable for these applications to incorporate such devices with multiple, high-quality-factor resonances; however, it can be challenging to obtain more than a pair of narrow resonances in a single plasmonic surface. Here, we demonstrate a multi-resonant metasurface that operates by extending the functionality of surface lattice resonances, which are the collective responses of arrays of metallic nanoparticles. This device features a series of resonances with high quality factors (Q ~ 40), an order of magnitude larger than what is typically achievable with plasmonic nanoparticles, as well as a narrow free spectral range. This design methodology can be used to better tailor the transmission spectrum of resonant metasurfaces and represents an important step towards the miniaturization of optical devices.
△ Less
Submitted 15 August, 2019; v1 submitted 30 June, 2019;
originally announced July 2019.
-
Demonstration of Optical Nonlinearity in InGaAsP/InP Passive Waveguides
Authors:
Shayan Saeidi,
Payman Rasekh,
Kashif M. Awan,
Alperen Tüğen,
Mikko J. Huttunen,
Ksenia Dolgaleva
Abstract:
We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonl…
▽ More
We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonlinear phase shift of up to $2.5π$ has been observed in self-phase modulation experiments. The measured value of the two-photon absorption coefficient $α_2$ was 15 cm/GW. The four-wave mixing conversion range, representing the wavelength difference between maximally separated signal and idler spectral components, was observed to be 45 nm. Our results indicate that InGaAsP has a high potential as a material platform for nonlinear photonic devices, provided that the operation wavelength range outside the two-photon absorption window is selected.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Using surface lattice resonances to engineer nonlinear optical processes in metal nanoparticle arrays
Authors:
Mikko J. Huttunen,
Payman Rasekh,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Collective responses of localized surface plasmon resonances, known as surface lattice resonances (SLRs) in metal nanoparticle arrays, can lead to high quality factors (~100), large local-field enhancements and strong light-matter interactions. SLRs have found many applications in linear optics, but little work of the influence of SLRs on nonlinear optics has been reported. Here we show how SLRs c…
▽ More
Collective responses of localized surface plasmon resonances, known as surface lattice resonances (SLRs) in metal nanoparticle arrays, can lead to high quality factors (~100), large local-field enhancements and strong light-matter interactions. SLRs have found many applications in linear optics, but little work of the influence of SLRs on nonlinear optics has been reported. Here we show how SLRs could be utilized to enhance nonlinear optical interactions. We devote special attention to the sum-frequency, difference-frequency, and third-harmonic generation processes because of their potential for the realization of novel sources of light. We also demonstrate how such arrays could be engineered to enhance higher-order nonlinear optical interactions through cascaded nonlinear processes. In particular, we demonstrate how the efficiency of third-harmonic generation could be engineered via cascaded second-order responses.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Enhanced spectral sensitivity of a chip-scale photonic-crystal slow-light interferometer
Authors:
Omar S. Magaña-Loaiza,
Boshen Gao,
Sebastian A. Schulz,
Kashif Awan,
Jeremy Upham,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
We experimentally demonstrate that the spectral sensitivity of a Mach-Zehnder (MZ) interferometer can be enhanced through structural slow light. We observe a 20 times enhancement by placing a dispersion-engineered-slow-light photonic-crystal waveguide in one arm of a fibre-based MZ interferometer. The spectral sensitivity of the interferometer increases roughly linearly with the group index, and w…
▽ More
We experimentally demonstrate that the spectral sensitivity of a Mach-Zehnder (MZ) interferometer can be enhanced through structural slow light. We observe a 20 times enhancement by placing a dispersion-engineered-slow-light photonic-crystal waveguide in one arm of a fibre-based MZ interferometer. The spectral sensitivity of the interferometer increases roughly linearly with the group index, and we have quantified the resolution in terms of the spectral density of interference fringes. These results show promise for the use of slow-light methods for develo** novel tools for optical metrology and, specifically, for compact high-resolution spectrometers.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
Photonic Integrated Devices for Nonlinear Optics
Authors:
Lucia Caspani,
David Duchesne,
Ksenia Dolgaleva,
Sean Wagner,
Marcello Ferrera,
Luca Razzari,
Alessia Pasquazi,
Marco Peccianti,
David J. Moss,
J. Stewart Aitchison,
Roberto Morandotti
Abstract:
We review our recent progresses on frequency conversion in integrated devices, focusing primarily on experiments based on strip-loaded and quantum-well intermixed AlGaAs waveguides, and on CMOS-compatible high-index doped silica glass waveguides. The former includes both second- and third-order interactions, demonstrating wavelength conversion by tunable difference-frequency generation over a band…
▽ More
We review our recent progresses on frequency conversion in integrated devices, focusing primarily on experiments based on strip-loaded and quantum-well intermixed AlGaAs waveguides, and on CMOS-compatible high-index doped silica glass waveguides. The former includes both second- and third-order interactions, demonstrating wavelength conversion by tunable difference-frequency generation over a bandwidth of more than nm, as well as broadband self-phase modulation and tunable four-wave mixing. The latter includes four-wave mixing using low-power continuous-wave light in microring resonators as well as hyper-parametric oscillation in a high quality factor resonator, towards the realization of an integrated multiple wavelength source with important applications for telecommunications, spectroscopy, and metrology.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Correlated Photon Pair Production by Spontaneous Parametric Down Conversion in Quasi-Phase-Matched AlGaAs superlattice Waveguides using a Continuous Wave Pump
Authors:
Peyman Sarrafi,
Eric Zhu,
Ksenia Dolgaleva,
Barry M. Holmes,
David C. Hutchings,
Stewart Aitchison,
Li Qian
Abstract:
We report on the demonstration of correlated photon pair generation in quasi-phase-matched superlattice AlGaAs waveguides with a high coincidence-to-accidental ratio (CAR); with a continuous (CW) pump, the observed CAR (>100) is more than two order of magnitudes improvement over previously reported spontaneous down conversion (SPDC) schemes in AlGaAs waveguides with a pulsed pump.
We report on the demonstration of correlated photon pair generation in quasi-phase-matched superlattice AlGaAs waveguides with a high coincidence-to-accidental ratio (CAR); with a continuous (CW) pump, the observed CAR (>100) is more than two order of magnitudes improvement over previously reported spontaneous down conversion (SPDC) schemes in AlGaAs waveguides with a pulsed pump.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
