Showing 1–50 of 223 results for author: Doi, M

Scale setting and hadronic properties in light quark sector with $(2+1)$-flavor Wilson fermions at the physical point

Authors: Tatsumi Aoyama, Takahiro M. Doi, Takumi Doi, Etsuko Itou, Yan Lyu, Kotaro Murakami, Takuya Sugiura

Abstract: We report scale setting and hadronic properties for our new lattice QCD gauge configuration set (HAL-conf-2023). We employ $(2+1)$-flavor nonperturbatively improved Wilson fermions with stout smearing and the Iwasaki gauge action on a $96^4$ lattice, and generate configurations of 8,000 trajectories at the physical point. We show the basic properties of the configurations such as the plaquette val… ▽ More We report scale setting and hadronic properties for our new lattice QCD gauge configuration set (HAL-conf-2023). We employ $(2+1)$-flavor nonperturbatively improved Wilson fermions with stout smearing and the Iwasaki gauge action on a $96^4$ lattice, and generate configurations of 8,000 trajectories at the physical point. We show the basic properties of the configurations such as the plaquette value, topological charge distribution and their auto-correlation times. The scale setting is performed by detailed analyses of the $Ω$ baryon mass. We calculate the physical results of quark masses, decay constants of pseudoscalar mesons and single hadron spectra in light quark sector. The masses of the stable hadrons are found to agree with the experimental values within a sub-percent level. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 31 pages and 18 figures

Report number: RIKEN-iTHEMS-Report-24, YITP-24-73

Phase transition in binary compressed sensing based on $L_{1}$-norm minimization

Authors: Mikiya Doi, Masayuki Ohzeki

Abstract: Compressed sensing is a signal processing scheme that reconstructs high-dimensional sparse signals from a limited number of observations. In recent years, various problems involving signals with a finite number of discrete values have been attracting attention in the field of compressed sensing. In particular, binary compressed sensing, which restricts signal elements to binary values $\{0, 1\}$,… ▽ More Compressed sensing is a signal processing scheme that reconstructs high-dimensional sparse signals from a limited number of observations. In recent years, various problems involving signals with a finite number of discrete values have been attracting attention in the field of compressed sensing. In particular, binary compressed sensing, which restricts signal elements to binary values $\{0, 1\}$, is the most fundamental and straightforward analysis subject in such problem settings. We evaluate the typical performance of noiseless binary compressed sensing based on $L_{1}$-norm minimization using the replica method, a statistical mechanical approach. We analyze a general setting where the elements of the observation matrix follow a Gaussian distribution, including a non-zero mean. We demonstrate that the biased observation matrix indicates more reconstruction success conditions in binary compressed sensing. Our results are consistent with the outcomes of several prior studies. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 14 pages, 2 Figures

Optical Variability of Blazars in the Tomo-e Gozen Northern Sky Transient Survey

Authors: TianFang Zhang, Mamoru Doi, Mitsuru Kokubo, Shigeyuki Sako, Ryou Ohsawa, Nozomu Tominaga, Masaomi Tanaka, Yasushi Fukazawa, Hidenori Takahashi, Noriaki Arima, Naoto Kobayashi, Ko Arimatsu, Shin-ichiro Okumura, Sohei Kondo, Toshihiro Kasuga, Yuki Mori, Yuu Niino

Abstract: We studied the optical variability of 241 BL Lacs and 83 flat-spectrum radio quasars (FSRQ) from the 4LAC catalog using data from the Tomo-e Gozen Northern Sky Transient Survey, with $\sim$ 50 epochs per blazar on average. We excluded blazars whose optical variability may be underestimated due to the influence of their host galaxy, based on their optical luminosity ($L_O$). FSRQs with $γ$-ray phot… ▽ More We studied the optical variability of 241 BL Lacs and 83 flat-spectrum radio quasars (FSRQ) from the 4LAC catalog using data from the Tomo-e Gozen Northern Sky Transient Survey, with $\sim$ 50 epochs per blazar on average. We excluded blazars whose optical variability may be underestimated due to the influence of their host galaxy, based on their optical luminosity ($L_O$). FSRQs with $γ$-ray photon index greater than 2.6 exhibit very low optical variability, and their distribution of standard deviation of repeated photometry is significantly different from that of the other FSRQs (KS test P value equal to $5 \times 10^{-6}$ ). Among a sample of blazars at any particular cosmological epoch, those with lower $γ$-ray luminosity ($L_γ$) tend to have lower optical variability, and those FSRQs with $γ$-ray photon index greater than 2.6 tend to have low $L_γ$. We also measured the structure function of optical variability and found that the amplitude of the structure function for FSRQs is higher than previously measured and higher than that of BL Lacs at multiple time lags. Additionally, the amplitude of the structure function of FSRQs with high $γ$-ray photon index is significantly lower than that of FSRQs with low $γ$-ray photon index. The structure function of FSRQs of high $γ$-ray photon index shows a characteristic timescale of more than 10 days, which may be the variability timescale of the accretion disk. In summary, we infer that the optical component of FSRQs with high $γ$-ray photon index may be dominated by the accretion disk. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 22 pages, 13 figures

Bending-Rotation coupling in the viscoelasticity of semiflexible polymers -- Rigorous perturbation analysis from the rod limit

Authors: Zhongqiang Xiong, Ryohei Seto, Masao Doi

Abstract: Brownian motion and viscoelasticity of semiflexible polymers is a subject that has been studied for many years. Still, rigorous analysis has been hindered due to the difficulty in handling the constraint that polymer chains cannot be stretched along the contour. Here, we show a straightforward method to solve the problem. We consider a stiff polymer that has a persistent length $L_p$ much larger t… ▽ More Brownian motion and viscoelasticity of semiflexible polymers is a subject that has been studied for many years. Still, rigorous analysis has been hindered due to the difficulty in handling the constraint that polymer chains cannot be stretched along the contour. Here, we show a straightforward method to solve the problem. We consider a stiff polymer that has a persistent length $L_p$ much larger than the contour length $L$. We express the polymer configuration using three types of variables: the position vector of the center of mass $R_c$, the unit vector $n$ along the main axis, and the normal coordinates $u_p$ for bending. Solving the Smoluchowski equation for the distribution function of these variables, we calculate the equilibrium time correlation function $ \langle P(t)\cdot P(0) \rangle$ of the end-to-end vector $P$ and the complex modulus $G^*(ω)$ of dilute solution. They include the bending effect to the first order in $θ\equiv L/L_p$ and reduce to the exact results for the rigid rod in the limit of $θ\to 0$. The rotational diffusion coefficient increases slightly by the semiflexibility because the equilibrium length of the semiflexible polymer is smaller than that of the rigid rod with the same contour length. The storage modulus shows the same asymptotic dependence $G'(ω) \sim ω^{3/4}$ predicted by Shankar, Pasquali, and Morse [J. Rheol. 2002, 46, 1111--1154]. The high-frequency viscosity is predicted to be dependent on the thickness of the semiflexible polymers. △ Less

Submitted 20 May, 2024; v1 submitted 8 March, 2024; originally announced March 2024.

A Unified Model for Non-Fickian Diffusion and Anomalous Swelling of Glassy Polymer Gels

Authors: Peihan Lyu, Zhaoyu Ding, Masao Doi, Xingkun Man

Abstract: A sheet of glassy polymers placed in a solvent shows swelling behaviors quite different from that of soft polymers (rubbers and gels). (1) Non-Fickian diffusion (called case II diffusion): As solvent permeates into the sample, a sharp front is created between the swollen part and the glassy part, and it moves toward the center at constant speed. (2) Nonmonotonous swelling: The thickness of the sam… ▽ More A sheet of glassy polymers placed in a solvent shows swelling behaviors quite different from that of soft polymers (rubbers and gels). (1) Non-Fickian diffusion (called case II diffusion): As solvent permeates into the sample, a sharp front is created between the swollen part and the glassy part, and it moves toward the center at constant speed. (2) Nonmonotonous swelling: The thickness of the sample first increases and then decreases toward the equilibrium value. Here we propose a theory to explain such anomalous behavior by extending the previous theory for swelling of soft gels. We regard the material as a continuum mixture of a glassy polymer network and solvent. We assume that the polymer network is a viscoelastic gel of glassy polymers, and its relaxation time depends strongly on solvent concentration. We show that this theory explains the above two characteristics of glassy polymers in a simple and unified framework. The theory predicts how the permeation speed of the solvent and the characteristic times of the swelling process depend on material parameters and experimental conditions, which can be checked experimentally. △ Less

Submitted 23 April, 2024; v1 submitted 6 February, 2024; originally announced February 2024.

Journal ref: ACS Macro Lett. 2024, 13, 5, 483-488

Luminosity Functions of the Host Galaxies of Supernova

Authors: Zhuoxi Liang, Nao Suzuki, Mamoru Doi, Masayuki Tanaka, Naoki Yasuda

Abstract: We present the luminosity functions and stellar mass functions of supernova (SN) host galaxies and test if they differ from the functions of normal field galaxies. We utilize homogeneous samples consisting of 273 SNe Ia ($z\leq0.3$) and 44 core-collapse (CC) SNe ($z \leq 0.1$) from the Sloan Digital Sky Survey (SDSS) II Supernova Survey and the high-signal-to-noise-ratio photometry of galaxies fro… ▽ More We present the luminosity functions and stellar mass functions of supernova (SN) host galaxies and test if they differ from the functions of normal field galaxies. We utilize homogeneous samples consisting of 273 SNe Ia ($z\leq0.3$) and 44 core-collapse (CC) SNe ($z \leq 0.1$) from the Sloan Digital Sky Survey (SDSS) II Supernova Survey and the high-signal-to-noise-ratio photometry of galaxies from the Hyper Suprime-Cam Subaru Strategic Program (HSC SSP). SN hosts are classified into star-forming and passive galaxy groups based on the spectral energy distribution (SED) fitting. We find that the SN host luminosity functions and stellar mass functions deviate from those of normal field galaxies. Star-forming galaxies dominate the low-mass end of the SN Ia host mass function, while passive galaxies dominate the high-mass end. CC SNe are predominantly hosted by star-forming galaxies. In addition, intermediate-mass hosts produce CC SNe with the highest efficiency, while the efficiency of producing SNe Ia monotonically increases as the hosts become more massive. Furthermore, We derive the pseudo mass normalized SN rates (pSNuM) based on the mass functions. We find that the star-forming component of pSNuM$_{Ia}$ is less sensitive to the changes in stellar mass, in comparison with the total rate. The behavior of pSNuM$_{CC}$ suggests that the CC rate is proportional to the star-forming rate. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Exploration of new chemical materials using black-box optimization with the D-wave quantum annealer

Authors: Mikiya Doi, Yoshihiro Nakao, Takuro Tanaka, Masami Sako, Masayuki Ohzeki

Abstract: In materials informatics, searching for chemical materials with desired properties is challenging due to the vastness of the chemical space. Moreover, the high cost of evaluating properties necessitates a search with a few clues. In practice, there is also a demand for proposing compositions that are easily synthesizable. In the real world, such as in the exploration of chemical materials, it is c… ▽ More In materials informatics, searching for chemical materials with desired properties is challenging due to the vastness of the chemical space. Moreover, the high cost of evaluating properties necessitates a search with a few clues. In practice, there is also a demand for proposing compositions that are easily synthesizable. In the real world, such as in the exploration of chemical materials, it is common to encounter problems targeting black-box objective functions where formalizing the objective function in explicit form is challenging, and the evaluation cost is high. In recent research, a Bayesian optimization method has been proposed to formulate the quadratic unconstrained binary optimization (QUBO) problem as a surrogate model for black-box objective functions with discrete variables. Regarding this method, studies have been conducted using the D-Wave quantum annealer to optimize the acquisition function, which is based on the surrogate model and determines the next exploration point for the black-box objective function. In this paper, we address optimizing a black-box objective function containing discrete variables in the context of actual chemical material exploration. In this optimization problem, we demonstrate results obtaining parameters of the acquisition function by sampling from a probability distribution with variance can explore the solution space more extensively than in the case of no variance. As a result, we found combinations of substituents in compositions with the desired properties, which could only be discovered when we set an appropriate variance. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: 14pages, 4figures, 4tables

Journal ref: Front. Comput. Sci., 12 December 2023 Sec. Theoretical Computer Science

Effect of viscoelastic fluid on the lift force in lubricated contacts

Authors: Shiyuan Hu, Fanlong Meng, Masao Doi

Abstract: We consider a cylinder immersed in viscous fluid moving near a flat substrate covered by an incompressible viscoelastic fluid layer, and study the effect of the fluid viscoelasticity on the lift force exerted on the cylinder. The lift force is zero when the viscoelastic layer is not deformed, but becomes non-zero when it is deformed. We calculate the lift force by considering both the tangential s… ▽ More We consider a cylinder immersed in viscous fluid moving near a flat substrate covered by an incompressible viscoelastic fluid layer, and study the effect of the fluid viscoelasticity on the lift force exerted on the cylinder. The lift force is zero when the viscoelastic layer is not deformed, but becomes non-zero when it is deformed. We calculate the lift force by considering both the tangential stress and the normal stress applied at the surface of the viscoelastic layer. Our analysis indicates that as the layer changes from the elastic limit to the viscous limit, the lift force decreases with the decrease of the Deborah number (De). For small De, the effect of the layer elasticity is taken over by the surface tension and the lift force can become negative. We also show that the tangential stress and the interface slip velocity (the surface velocity relative to the substrate), which have been ignored in the previous analysis, give important contributions to the lift force. Especially for thin elastic layer, they give dominant contributions to the lift force. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Initial Flash and Spectral Formation of Type Ia Supernovae with An Envelope: Applications to Over-luminous SNe Ia

Authors: Keiichi Maeda, Ji-an Jiang, Mamoru Doi, Miho Kawabata, Toshikazu Shigeyama

Abstract: Over-luminous type Ia supernovae (SNe Ia) show peculiar observational features, for which an explosion of a super-massive white dwarf (WD) beyond the classical Chandrasekhar-limiting mass has been suggested, largely based on their high luminosities and slow light-curve evolution. However, their observational features are diverse, with a few extremely peculiar features whose origins have not been c… ▽ More Over-luminous type Ia supernovae (SNe Ia) show peculiar observational features, for which an explosion of a super-massive white dwarf (WD) beyond the classical Chandrasekhar-limiting mass has been suggested, largely based on their high luminosities and slow light-curve evolution. However, their observational features are diverse, with a few extremely peculiar features whose origins have not been clarified; strong and persisting C II lines, late-time accelerated luminosity decline and red spectra, and a sub-day time-scale initial flash clearly identified so far at least for three over-luminous SNe Ia. In the present work, we suggest a scenario that provides a unified solution to these peculiarities, through hydrodynamic and radiation transfer simulations together with analytical considerations; a C+O-rich envelope (~0.01 - 0.1 Msun) attached to an exploding WD. Strong C II lines are created within the shocked envelope. Dust formation is possible in the late phase, providing a sufficient optical depth thereafter. The range of the envelope mass considered here predicts an initial flash with time-scale of ~0.5 - 3 days. The scenario thus can explain some of the key diverse observational properties by a different amount of the envelope, but additional factors are also required; we argue that the envelope is distributed in a disc-like structure, and also the ejecta properties, e.g., the mass of the WD, plays a key role. Within the context of the hypothesized super-Chandrasekhar-mass WD scenario, we speculatively suggest a progenitor WD evolution including a spin-up accretion phase followed by a spin-down mass-ejection phase. △ Less

Submitted 28 February, 2023; v1 submitted 23 February, 2023; originally announced February 2023.

Comments: 11 pages, 5 figures, 1 table. Accepted for publication in MNRAS. Typos corrected and references updated

Density-Induced Hadron-Quark Crossover via the Formation of Cooper Triples

Authors: Hiroyuki Tajima, Shoichiro Tsutsui, Takahiro M. Doi, Kei Iida

Abstract: We discuss the hadron--quark crossover accompanied by the formation of Cooper triples (three-body counterpart of Cooper pairs) by analogy with the Bose--Einstein condensate to Bardeen--Cooper--Schrieffer crossover in two-component fermionic systems. Such a crossover is different from a phase transition, which often involves symmetry breaking. We calculate the in-medium three-body energy from the t… ▽ More We discuss the hadron--quark crossover accompanied by the formation of Cooper triples (three-body counterpart of Cooper pairs) by analogy with the Bose--Einstein condensate to Bardeen--Cooper--Schrieffer crossover in two-component fermionic systems. Such a crossover is different from a phase transition, which often involves symmetry breaking. We calculate the in-medium three-body energy from the three-body $T$-matrix with a phenomenological three-body force characterizing a bound hadronic state in vacuum. With increasing density, the hadronic bound-state pole smoothly undergoes a crossover toward the Cooper triple phase where the in-medium three-body clusters coexist with the quark Fermi sea. The relation to the quarkyonic matter model can also be found in a natural manner. △ Less

Submitted 1 February, 2023; v1 submitted 25 November, 2022; originally announced November 2022.

Comments: 8 pages, 4 figures

Report number: RIKEN-iTHEMS-Report-22

Journal ref: Symmetry 15, 333 (2023)

Universality in the dynamics of vesicle translocation through a hole

Authors: Bin Zheng, Fangfu Ye, Shigeyuki Komura, Masao Doi

Abstract: We analyze the translocation process of a spherical vesicle, made of membrane and incompressible fluid, through a hole smaller than the vesicle size, driven by pressure difference $ΔP$. We show that such a vesicle shows certain universal characteristics which is independent of the details of the membrane elasticity; (i) there is a critical pressure $ΔP_{\rm c}$ below which no translocation occurs,… ▽ More We analyze the translocation process of a spherical vesicle, made of membrane and incompressible fluid, through a hole smaller than the vesicle size, driven by pressure difference $ΔP$. We show that such a vesicle shows certain universal characteristics which is independent of the details of the membrane elasticity; (i) there is a critical pressure $ΔP_{\rm c}$ below which no translocation occurs, (ii) $ΔP_{\rm c}$ decreases to zero as the vesicle radius $R_0$ approaches the hole radius $a$, satisfying the scaling relation $ΔP_{\rm c} \sim (R_0 - a)^{3/2}$, and (iii) the translocation time $τ$ diverges as $ΔP$ decreases to $ΔP_{\rm c}$, satisfying the scaling relation $τ\sim (ΔP -ΔP_{\rm c})^{-1/2}$. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Journal ref: Langmuir 2023, 39, 1, 563

Video Observations of Tiny Near-Earth Objects with Tomo-e Gozen

Authors: ** Beniyama, Shigeyuki Sako, Ryou Ohsawa, Satoshi Takita, Naoto Kobayashi, Shin-ichiro Okumura, Seitaro Urakawa, Makoto Yoshikawa, Fumihiko Usui, Fumi Yoshida, Mamoru Doi, Yuu Niino, Toshikazu Shigeyama, Masaomi Tanaka, Nozomu Tominaga, Tsutomu Aoki, Noriaki Arima, Ko Arimatsu, Toshihiro Kasuga, Sohei Kondo, Yuki Mori, Hidenori Takahashi, Jun-ichi Watanabe

Abstract: We report the results of video observations of tiny (diameter less than 100 m) near-Earth objects (NEOs) with Tomo-e Gozen on the Kiso 105 cm Schmidt telescope. A rotational period of a tiny asteroid reflects its dynamical history and physical properties since smaller objects are sensitive to the YORP effect. We carried out video observations of 60 tiny NEOs at 2 fps from 2018 to 2021 and successf… ▽ More We report the results of video observations of tiny (diameter less than 100 m) near-Earth objects (NEOs) with Tomo-e Gozen on the Kiso 105 cm Schmidt telescope. A rotational period of a tiny asteroid reflects its dynamical history and physical properties since smaller objects are sensitive to the YORP effect. We carried out video observations of 60 tiny NEOs at 2 fps from 2018 to 2021 and successfully derived the rotational periods and axial ratios of 32 NEOs including 13 fast rotators with rotational periods less than 60 s. The fastest rotator found during our survey is 2020 HS7 with a rotational period of 2.99 s. We statistically confirmed that there is a certain number of tiny fast rotators in the NEO population, which have been missed with any previous surveys. We have discovered that the distribution of the tiny NEOs in a diameter and rotational period (D-P) diagram is truncated around a period of 10 s. The truncation with a flat-top shape is not explained well either by a realistic tensile strength of NEOs or suppression of YORP by meteoroid impacts. We propose that the dependence of the tangential YORP effect on the rotational period potentially explains the observed pattern in the D-P diagram. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: This article is published in PASJ as open access, published by OUP (https://doi.org/10.1093/pasj/psac043). 27 pages, 16 figures

Fast optical flares from M dwarfs detected by a one-second-cadence survey with Tomo-e Gozen

Authors: Masataka Aizawa, Kojiro Kawana, Kazumi Kashiyama, Ryou Ohsawa, Hajime Kawahara, Fumihiro Naokawa, Tomoyuki Tajiri, Noriaki Arima, Hanchun Jiang, Tilman Hartwig, Kotaro Fujisawa, Toshikazu Shigeyama, Ko Arimatsu, Mamoru Doi, Toshihiro Kasuga, Naoto Kobayashi, Sohei Kondo, Yuki Mori, Shin-ichiro Okumura, Satoshi Takita, Shigeyuki Sako

Abstract: We report a one-second-cadence wide-field survey for M-dwarf flares using the Tomo-e Gozen camera mounted on the Kiso Schmidt telescope. We detect 22 flares from M3-M5 dwarfs with rise times and amplitudes ranging from $5\, \mathrm{sec} \lesssim t_\mathrm{rise} \lesssim 100\,\mathrm{sec}$ and $0.5 \lesssim ΔF/F_{\star} \lesssim 20$, respectively. The flare light curves mostly show steeper rises an… ▽ More We report a one-second-cadence wide-field survey for M-dwarf flares using the Tomo-e Gozen camera mounted on the Kiso Schmidt telescope. We detect 22 flares from M3-M5 dwarfs with rise times and amplitudes ranging from $5\, \mathrm{sec} \lesssim t_\mathrm{rise} \lesssim 100\,\mathrm{sec}$ and $0.5 \lesssim ΔF/F_{\star} \lesssim 20$, respectively. The flare light curves mostly show steeper rises and shallower decays than those obtained from the Kepler one-minute cadence data and tend to have flat peak structures. Assuming a blackbody spectrum with temperatures of $9,000-15,000\,\mathrm{K}$, the peak luminosities and bolometric energies are estimated to be $10^{29}\,\mathrm{erg\,sec^{-1}} \lesssim L_\mathrm{peak} \lesssim 10^{31}\,\mathrm{erg\,sec^{-1}}$ and $10^{31}\,\mathrm{erg} \lesssim E_{\rm bol} \lesssim 10^{34}\,\mathrm{erg}$, which constitutes the bright end of fast optical flares for M dwarfs. We confirm that more than 90\% of the host stars of the detected flares are magnetically active based on their H$α$ emission line intensities obtained by LAMOST. The estimated occurrence rate of the detected flares is $\sim 0.7$ per day per an active star, indicating they are common in magnetically active M dwarfs. We argue that the flare light curves can be explained by the chromospheric compression model; the rise time is broadly consistent with the Alfvén transit time of a magnetic loop with a length scale of $l_\mathrm{loop} \sim 10^4\,\mathrm{km}$ and a field strength of $1,000\,\mathrm{G}$, while the decay time is likely determined by the radiative cooling of the compressed chromosphere down to near the photosphere with a temperature of $\gtrsim 10,000\,\mathrm{K}$. These flares from M dwarfs could be a major contamination source for a future search of fast optical transients of unknown types. △ Less

Submitted 26 June, 2022; originally announced June 2022.

Comments: 39 pages, 13 figures, accepted for publication in PASJ

MUSSES2020J: The Earliest Discovery of a Fast Blue Ultraluminous Transient at Redshift 1.063

Authors: Ji-an Jiang, Naoki Yasuda, Keiichi Maeda, Nozomu Tominaga, Mamoru Doi, Željko Ivezić, Peter Yoachim, Kohki Uno, Takashi J. Moriya, Brajesh Kumar, Yen-Chen Pan, Masayuki Tanaka, Masaomi Tanaka, Ken'ichi Nomoto, Saurabh W. Jha, Pilar Ruiz-Lapuente, David Jones, Toshikazu Shigeyama, Nao Suzuki, Mitsuru Kokubo, Hisanori Furusawa, Satoshi Miyazaki, Andrew J. Connolly, D. K. Sahu, G. C. Anupama

Abstract: In this Letter, we report the discovery of an ultraluminous fast-evolving transient in rest-frame UV wavelengths, MUSSES2020J, soon after its occurrence by using the Hyper Suprime-Cam (HSC) mounted on the 8.2 m Subaru telescope. The rise time of about 5 days with an extremely high UV peak luminosity shares similarities to a handful of fast blue optical transients whose peak luminosities are compar… ▽ More In this Letter, we report the discovery of an ultraluminous fast-evolving transient in rest-frame UV wavelengths, MUSSES2020J, soon after its occurrence by using the Hyper Suprime-Cam (HSC) mounted on the 8.2 m Subaru telescope. The rise time of about 5 days with an extremely high UV peak luminosity shares similarities to a handful of fast blue optical transients whose peak luminosities are comparable with the most luminous supernovae while their timescales are significantly shorter (hereafter "fast blue ultraluminous transient," FBUT). In addition, MUSSES2020J is located near the center of a normal low-mass galaxy at a redshift of 1.063, suggesting a possible connection between the energy source of MUSSES2020J and the central part of the host galaxy. Possible physical mechanisms powering this extreme transient such as a wind-driven tidal disruption event and an interaction between supernova and circumstellar material are qualitatively discussed based on the first multiband early-phase light curve of FBUTs, although whether the scenarios can quantitatively explain the early photometric behavior of MUSSES2020J requires systematical theoretical investigations. Thanks to the ultrahigh luminosity in UV and blue optical wavelengths of these extreme transients, a promising number of FBUTs from the local to the high-z universe can be discovered through deep wide-field optical surveys in the near future. △ Less

Submitted 10 June, 2022; v1 submitted 30 May, 2022; originally announced May 2022.

Comments: 14 pages, 5 figures, accepted for publication in The Astrophysical Journal Letters

Journal ref: ApJL 933, L36 (2022)

Derivation of Two-fluid Model Based on Onsager Principle

Authors: Jiajia Zhou, Masao Doi

Abstract: Using Onsager variational principle, we study the dynamic coupling between the stress and the composition in polymer solution. In the original derivation of the two-fluid model [Doi and Onuki, J. Phys. II France {\bf 2}, 1631 (1992)], the polymer stress was introduced \emph{a priopri}, therefore a constitutive equation is required to close the equations. Based on our previous study of viscoelastic… ▽ More Using Onsager variational principle, we study the dynamic coupling between the stress and the composition in polymer solution. In the original derivation of the two-fluid model [Doi and Onuki, J. Phys. II France {\bf 2}, 1631 (1992)], the polymer stress was introduced \emph{a priopri}, therefore a constitutive equation is required to close the equations. Based on our previous study of viscoelastic fluids with homogeneous composition [Phys. Rev. Fluids {\bf 3}, 084004 (2018)], we start with a dumbbell model for the polymer, and derive all dynamic equations using the Onsager variational principle. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Comments: 11 pages, submitted to Entropy

Journal ref: Entropy 24, 716 (2022)

Deep simultaneous limits on optical emission from FRB 20190520B by 24.4 fps observations with Tomo-e Gozen

Authors: Yuu Niino, Mamoru Doi, Shigeyuki Sako, Ryou Ohsawa, Noriaki Arima, Ji-an Jiang, Nozomu Tominaga, Masaomi Tanaka, Di Li, Chen-Hui Niu, Chao-Wei Tsai, Naoto Kobayashi, Hidenori Takahashi, Sohei Kondo, Yuki Mori, Tsutomu Aoki, Ko Arimatsu, Toshihiro Kasuga, Shin-ichiro Okumura

Abstract: We conduct 24.4~fps optical observations of repeating Fast Radio Burst (FRB) 20190520B using Tomo-e Gozen, a high-speed CMOS camera mounted on the Kiso 105-cm Schmidt telescope, simultaneously with radio observations carried out using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). We succeeded in the simultaneous optical observations of 11 radio bursts that FAST detected. Howeve… ▽ More We conduct 24.4~fps optical observations of repeating Fast Radio Burst (FRB) 20190520B using Tomo-e Gozen, a high-speed CMOS camera mounted on the Kiso 105-cm Schmidt telescope, simultaneously with radio observations carried out using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). We succeeded in the simultaneous optical observations of 11 radio bursts that FAST detected. However, no corresponding optical emission was found. The optical fluence limits as deep as 0.068 Jy ms are obtained for the individual bursts (0.029 Jy ms on the stacked data) corrected for the dust extinction in the Milky Way. The fluence limit is deeper than those obtained in the previous simultaneous observations for an optical emission with a duration $\gtrsim 0.1$ ms. Although the current limits on radio--optical spectral energy distribution (SED) of FRBs are not constraining, we show that SED models based on observed SEDs of radio variable objects such as optically detected pulsars, and a part of parameter spaces of theoretical models in which FRB optical emission is produced by inverse-Compton scattering in a pulsar magnetosphere or a strike of a magnetar blastwave into a hot wind bubble, can be ruled out once a similar fluence limit as in our observation is obtained for a bright FRB with a radio fluence $\gtrsim 5$ Jy ms. △ Less

Submitted 1 August, 2022; v1 submitted 26 April, 2022; originally announced April 2022.

Comments: Accepted for publication in ApJ, metadata corrected

Capillary rising in a tube with corners

Authors: Chen Zhao, Jiajia Zhou, Masao Doi

Abstract: We study the dynamics of a fluid rising in a capillary tube with corners. In the cornered tube, unlike the circular tube, fluid rises with two parts, the bulk part where the entire cross-section is occupied by the fluid, and the finger part where the cross-section is only partially filled. Using Onsager principle, we derive coupled time-evolution equations for the two parts. We show that (a) at th… ▽ More We study the dynamics of a fluid rising in a capillary tube with corners. In the cornered tube, unlike the circular tube, fluid rises with two parts, the bulk part where the entire cross-section is occupied by the fluid, and the finger part where the cross-section is only partially filled. Using Onsager principle, we derive coupled time-evolution equations for the two parts. We show that (a) at the early stage of rising, the dynamics is dominated by the bulk part and the fluid height $h_0(t)$ shows the same behavior as that in the circular tube, and (b) at the late stage, the bulk part stops rising, but the finger part keeps rising following the scaling law of $h_1(t) \sim t^{1/3}$. We also show that due to the coupling between the two parts, the equilibrium bulk height is smaller than the Jurin's height which ignores the effect of the finger part. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 22 pages, 8 figures, supporting information included, submitted to Langmuir

Journal ref: Langmuir 38, 5779 (2022)

Differential geometric global smoothings of simple normal crossing complex surfaces with trivial canonical bundle

Authors: Mamoru Doi, Naoto Yotsutani

Abstract: Let $X$ be a simple normal crossing (SNC) compact complex surface with trivial canonical bundle which includes triple intersections. We prove that if $X$ is $d$-semistable, then there exists a family of smoothings in a differential geometric sense. This can be interpreted as a differential geometric analogue of the smoothability results due to Friedman, Kawamata-Namikawa, Felten-Filip-Ruddat, Chan… ▽ More Let $X$ be a simple normal crossing (SNC) compact complex surface with trivial canonical bundle which includes triple intersections. We prove that if $X$ is $d$-semistable, then there exists a family of smoothings in a differential geometric sense. This can be interpreted as a differential geometric analogue of the smoothability results due to Friedman, Kawamata-Namikawa, Felten-Filip-Ruddat, Chan-Leung-Ma, and others in algebraic geometry. The proof is based on an explicit construction of local smoothings around the singular locus of $X$, and the first author's existence result of holomorphic volume forms on global smoothings of $X$. In particular, these volume forms are given as solutions of a nonlinear elliptic partial differential equation. As an application, we provide several examples of $d$-semistable SNC complex surfaces with trivial canonical bundle including double curves, which are smoothable to complex tori, primary Kodaira surfaces and $K3$ surfaces. We also provide several examples of such complex surfaces including triple points, which are smoothable to $K3$ surfaces. △ Less

Submitted 30 March, 2023; v1 submitted 17 March, 2022; originally announced March 2022.

Comments: 44 pages, 3 figures. Matches the version published in COMPLEX MANIFOLDS

MSC Class: 58J37; 14J28

Journal ref: Complex Manifolds, 10 (2023) 20220143

Nuclear force with LapH smearing

Authors: Takuya Sugiura, Yutaro Akahoshi, Tatsumi Aoyama, Takahiro M. Doi, Takumi Doi

Abstract: The nuclear forces are determined by combining the HAL QCD method and a new type of source smearing technique. The new smearing is a projection to a space spanned by the lowest-lying eigenvectors of the free Laplacian operator on a lattice, which enables efficient calculation of hadron correlators at an affordable cost by utilizing the hadron-level momentum conservations. We find that this new app… ▽ More The nuclear forces are determined by combining the HAL QCD method and a new type of source smearing technique. The new smearing is a projection to a space spanned by the lowest-lying eigenvectors of the free Laplacian operator on a lattice, which enables efficient calculation of hadron correlators at an affordable cost by utilizing the hadron-level momentum conservations. We find that this new approach reduces the statistical and systematic errors in the resultant nuclear forces. △ Less

Submitted 25 February, 2022; originally announced February 2022.

Comments: 7 pages, 6 figures

Report number: RIKEN-iTHEMS-Report-22

A Very Metal-poor RR Lyrae Star with a Disk Orbit Found in the Solar Neighborhood

Authors: Noriyuki Matsunaga, Akinori Itane, Kohei Hattori, Juliana Crestani, Vittorio Braga, Giuseppe Bono, Daisuke Taniguchi, Junichi Baba, Hiroyuki Maehara, Nobuharu Ukita, Tsuyoshi Sakamoto, Naoto Kobayashi, Tsutomu Aoki, Takao Soyano, Ken'ichi Tarusawa, Yuki Sarugaku, Hiroyuki Mito, Shigeyuki Sako, Mamoru Doi, Yoshikazu Nakada, Natsuko Izumi, Yoshifusa Ita, Hiroki Onozato, Mingjie Jian, Sohei Kondo , et al. (6 additional authors not shown)

Abstract: Metal-deficient stars are important tracers for understanding the early formation of the Galaxy. Recent large-scale surveys with both photometric and spectroscopic data have reported an increasing number of metal-deficient stars whose kinematic features are consistent with those of the disk stellar populations. We report the discovery of an RR~Lyrae variable (hereafter RRL) that is located within… ▽ More Metal-deficient stars are important tracers for understanding the early formation of the Galaxy. Recent large-scale surveys with both photometric and spectroscopic data have reported an increasing number of metal-deficient stars whose kinematic features are consistent with those of the disk stellar populations. We report the discovery of an RR~Lyrae variable (hereafter RRL) that is located within the thick disk and has an orbit consistent with the thick-disk kinematics. Our target RRL (HD 331986) is located at around 1 kpc from the Sun and, with V=11.3, is among the 130 brightest RRLs known so far. However, this object was scarcely studied because it is in the midplane of the Galaxy, the Galactic latitude around -1 deg. Its near-infrared spectrum (0.91-1.32 micron) shows no absorption line except hydrogen lines of the Paschen series, suggesting [Fe/H] less than -2.5. It is the most metal-deficient RRL, at least, among the RRLs whose orbits are consistent with the disk kinematics, although we cannot determine to which of the disk and the halo it belongs. This unique RRL would provide us with essential clues for studying the early formation of stars in the inner Galaxy with further investigations, including high-resolution optical spectroscopy. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Comments: 13 pages, 7 figures, 6 tables, accepted for publication in ApJ

Discovery of the Fastest Early Optical Emission from Overluminous SN Ia 2020hvf: A Thermonuclear Explosion within a Dense Circumstellar Environment

Authors: Ji-an Jiang, Keiichi Maeda, Miho Kawabata, Mamoru Doi, Toshikazu Shigeyama, Masaomi Tanaka, Nozomu Tominaga, Ken'ichi Nomoto, Yuu Niino, Shigeyuki Sako, Ryou Ohsawa, Malte Schramm, Masayuki Yamanaka, Naoto Kobayashi, Hidenori Takahashi, Tatsuya Nakaoka, Koji S. Kawabata, Keisuke Isogai, Tsutomu Aoki, Sohei Kondo, Yuki Mori, Ko Arimatsu, Toshihiro Kasuga, Shin-ichiro Okumura, Seitaro Urakawa , et al. (6 additional authors not shown)

Abstract: In this Letter we report a discovery of a prominent flash of a peculiar overluminous Type Ia supernova, SN 2020hvf, in about 5 hours of the supernova explosion by the first wide-field mosaic CMOS sensor imager, the Tomo-e Gozen Camera. The fast evolution of the early flash was captured by intensive intranight observations via the Tomo-e Gozen high-cadence survey. Numerical simulations show that su… ▽ More In this Letter we report a discovery of a prominent flash of a peculiar overluminous Type Ia supernova, SN 2020hvf, in about 5 hours of the supernova explosion by the first wide-field mosaic CMOS sensor imager, the Tomo-e Gozen Camera. The fast evolution of the early flash was captured by intensive intranight observations via the Tomo-e Gozen high-cadence survey. Numerical simulations show that such a prominent and fast early emission is most likely generated from an interaction between $0.01~M_{\odot}$ circumstellar material (CSM) extending to a distance of $\sim$$10^{13}~\text{cm}$ and supernova ejecta soon after the explosion, indicating a confined dense CSM formation at the final evolution stage of the progenitor of SN 2020hvf. Based on the CSM-ejecta interaction-induced early flash, the overluminous light curve, and the high ejecta velocity of SN 2020hvf, we suggest that the SN 2020hvf may originate from a thermonuclear explosion of a super-Chandrasekhar-mass white dwarf ("super-$M\rm_{Ch}$ WD"). Systematical investigations on explosion mechanisms and hydrodynamic simulations of the super-$M\rm_{Ch}$ WD explosion are required to further test the suggested scenario and understand the progenitor of this peculiar supernova. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Comments: 20pages, 6 figures, accepted for publication in the Astrophysical Journal Letters

Journal ref: ApJL 923, L8 (2021)

Geometric construction of canonical 3D gadgets in origami extrusions

Authors: Mamoru Doi

Abstract: In a series of our three previous papers, we presented several constructions of positive and negative 3D gadgets in origami extrusions which create with two simple outgoing pleats a top face parallel to the ambient paper and two side faces sharing a ridge, where a 3D gadget is said to be positive (resp. negative) if the top face of the resulting gadget seen from the front side lies above (resp. be… ▽ More In a series of our three previous papers, we presented several constructions of positive and negative 3D gadgets in origami extrusions which create with two simple outgoing pleats a top face parallel to the ambient paper and two side faces sharing a ridge, where a 3D gadget is said to be positive (resp. negative) if the top face of the resulting gadget seen from the front side lies above (resp. below) the ambient paper. For any possible set of angle parameters, we obtained an infinite number of positive 3D gadgets in our second paper, while we obtained a unique negative 3D gadget by our third construction in our third paper. In this paper we present a geometric (ruler and compass) construction of our third negative 3D gadgets, while the construction presented in our third paper was a numerical one using a rather complicated formula. Also, we prove that there exists a unique positive 3D gadget corresponding to each of our third negative ones. Thus we obtain a canonical pair of a positive and a negative 3D gadget. The proof is based on a geometric redefinition of the critical angles which we introduced in constructing our positive 3D gadgets. This redefinition also enables us to give a simplified proof of the existence theorem of our positive 3D gadgets in our second paper. As an application, we can construct a positive and a negative extrusion from a common crease pattern by using the canonical counterparts, as long as there arise no interferences. △ Less

Submitted 5 November, 2021; originally announced November 2021.

Comments: 17 pages, 9 figures, 3 tables

Wetting dynamics in an angular channel

Authors: Chen Zhao, Tian Yu, Jiajia Zhou, Masao Doi

Abstract: We analyze the dynamics of liquid filling in a thin, slightly inflated rectangular channel driven by capillary forces. We show that although the amount of liquid $m$ in the channel increases in time following the classical Lucas-Washburn law, $m \propto t^{1/2}$, the prefactor is very sensitive to the deformation of the channel because the filling takes place by the growth of two parts, the bulk p… ▽ More We analyze the dynamics of liquid filling in a thin, slightly inflated rectangular channel driven by capillary forces. We show that although the amount of liquid $m$ in the channel increases in time following the classical Lucas-Washburn law, $m \propto t^{1/2}$, the prefactor is very sensitive to the deformation of the channel because the filling takes place by the growth of two parts, the bulk part (where the cross-section is completely filled by the liquid), and the finger part (where the cross-section is partially filled). We calculate the time dependence of $m$ accounting for the coupling between the two parts and show that the prefactor for the filling can be reduced significantly by a slight deformation of the rectangular channel, e.g., the prefactor is reduced 50% for a strain of 0.1%. This offers an explanation for the large deviation in the value of the prefactor reported previously. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: 12 pages, 4 figures, supporting information included, submitted to Langmuir

Journal ref: Langmuir 37, 11276 (2021)

Three-body crossover from a Cooper triple to bound trimer state in three-component Fermi gases near a triatomic resonance

Authors: Hiroyuki Tajima, Shoichiro Tsutsui, Takahiro M. Doi, Kei Iida

Abstract: We theoretically investigate ground-state properties of a three-component Fermi gas with pairwise contact interactions between different components near a triatomic resonance where bound trimers are about to appear. Using variational equations for in-medium two- and three-body cluster states in three dimensions, we elucidate the competition of pair and triple formations due to the Fermi surface ef… ▽ More We theoretically investigate ground-state properties of a three-component Fermi gas with pairwise contact interactions between different components near a triatomic resonance where bound trimers are about to appear. Using variational equations for in-medium two- and three-body cluster states in three dimensions, we elucidate the competition of pair and triple formations due to the Fermi surface effects. We present the ground-state phase diagram that exhibits transition from a Cooper pair to Cooper triple state and crossover from a Cooper triple to tightly bound trimer state at negative scattering lengths. This three-body crossover is analogous to the Bardeen-Cooper-Schrieffer to Bose-Einstein condensation crossover observed in a two-component Fermi gas. We predict that the threshold scattering length $a_{-}$ for three-body states can be shifted towards the weak-coupling side due to the emergence of Cooper triples. △ Less

Submitted 28 July, 2021; originally announced July 2021.

Comments: 21 pages, 4 figures

Report number: RIKEN-QHP-500, RIKEN-iTHEMS-Report-21

Journal ref: Phys. Rev. A 104, 053328 (2021)

Contact Angle of an Evaporating Droplet of Binary Solution on a Super Wetting Surface

Authors: Mengmeng Wu, Masao Doi, Xingkun Man

Abstract: We study the dynamics of contact angle of a droplet of binary solution evaporating on a super wetting surface. Recent experiments show that although equilibrium contact angle of such droplet is zero, the contract angle can show complex time dependence before reaching the equilibrium value. We analyse such phenomena by extending our previous theory for the dynamics of an evaporating single componen… ▽ More We study the dynamics of contact angle of a droplet of binary solution evaporating on a super wetting surface. Recent experiments show that although equilibrium contact angle of such droplet is zero, the contract angle can show complex time dependence before reaching the equilibrium value. We analyse such phenomena by extending our previous theory for the dynamics of an evaporating single component droplet to double component droplet. We show that the time dependence of the contact angle can be quite complex. Typically, it first decreases slightly, and then increases and finally decreases again. Under certain conditions, we find that the contact angle remains constant over a certain period of time during evaporation. We study how the plateau or peak contact angle depends on the initial composition and the humidity. The theory explains experimental results reported previously. △ Less

Submitted 24 July, 2021; originally announced July 2021.

Comments: 19 pages, 5 figures, to be published in Soft Matter

Unitary $p$-wave Fermi gas in one dimension

Authors: Hiroyuki Tajima, Shoichiro Tsutsui, Takahiro M. Doi, Kei Iida

Abstract: We elucidate universal many-body properties of a one-dimensional, two-component ultracold Fermi gas near the $p$-wave Feshbach resonance. The low-energy scattering in this system can be characterized by two parameters, that is, $p$-wave scattering length and effective range. At the unitarity limit where the $p$-wave scattering length diverges and the effective range is reduced to zero without conf… ▽ More We elucidate universal many-body properties of a one-dimensional, two-component ultracold Fermi gas near the $p$-wave Feshbach resonance. The low-energy scattering in this system can be characterized by two parameters, that is, $p$-wave scattering length and effective range. At the unitarity limit where the $p$-wave scattering length diverges and the effective range is reduced to zero without conflicting with the causality bound, the system obeys universal thermodynamics as observed in a unitary Fermi gas with contact $s$-wave interaction in three dimensions. It is in contrast to a Fermi gas with the $p$-wave resonance in three dimensions in which the effective range is inevitably finite. We present the universal equation of state in this unitary $p$-wave Fermi gas within the many-body $T$-matrix approach as well as the virial expansion method. Moreover, we examine the single-particle spectral function in the high-density regime where the virial expansion is no longer valid. On the basis of the Hartree-like self-energy shift at the divergent scattering length, we conjecture that the equivalence of the Bertsch parameter across spatial dimensions holds even for a one-dimensional unitary $p$-wave Fermi gas. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 9 pages, 5 figures

Report number: RIKEN-QHP-498, RIKEN-iTHEMS-Report-21

Journal ref: Phys. Rev. A 104, 023319 (2021)

Complex Langevin study for polarons in an attractively interacting one-dimensional two-component Fermi gas

Authors: Takahiro M. Doi, Hiroyuki Tajima, Shoichiro Tsutsui

Abstract: We investigate a polaronic excitation in a one-dimensional spin-1/2 Fermi gas with contact attractive interactions, using the complex Langevin method, which is a promising approach to evade a possible sign problem in quantum Monte Carlo simulations. We found that the complex Langevin method works correctly in a wide range of temperature, interaction strength, and population imbalance. The Fermi po… ▽ More We investigate a polaronic excitation in a one-dimensional spin-1/2 Fermi gas with contact attractive interactions, using the complex Langevin method, which is a promising approach to evade a possible sign problem in quantum Monte Carlo simulations. We found that the complex Langevin method works correctly in a wide range of temperature, interaction strength, and population imbalance. The Fermi polaron energy extracted from the two-point imaginary Green's function is not sensitive to the temperature and the impurity concentration in the parameter region we considered. Our results show a good agreement with the solution of the thermodynamic Bethe ansatz at zero temperature. △ Less

Submitted 23 May, 2021; originally announced May 2021.

Comments: 18 pages, 5 figures

Report number: RIKEN-QHP-495, RIKEN-iTHEMS-Report-21

Journal ref: Phys. Rev. Research 3, 033180 (2021)

Swelling Dynamics of a Disk-Shaped Gel

Authors: Xingkun Man, Masao Doi

Abstract: When a gel absorbs solvent from surrounding, stress field is created in the gel, and this causes complex dynamics of the swelling behavior. Here we study this effect for disk-shaped gel by rigorously solving the diffusio-mechanical coupling equation. We show that (a) while the macroscopic thickness and the radius of the gel increases monotonically in time, the gel is compressed near the mid-plane,… ▽ More When a gel absorbs solvent from surrounding, stress field is created in the gel, and this causes complex dynamics of the swelling behavior. Here we study this effect for disk-shaped gel by rigorously solving the diffusio-mechanical coupling equation. We show that (a) while the macroscopic thickness and the radius of the gel increases monotonically in time, the gel is compressed near the mid-plane, and that (b) while the swelling time depends on the shear modulus $G$ of the gel, its dependence is weak, and the time is mainly determined by the friction constant of the gel network and the osmotic bulk modulus of the gel. We also show that these characteristic features are reproduced accurately by a simple variational calculation for the gel deformation. An analytical expression is given for the swelling time. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Comments: 17 pages, 5 figures, to be appeared in Macromolecules

Negative 3D gadgets in origami extrusions with a supporting triangle on the back side

Authors: Mamoru Doi

Abstract: In our previous two papers, we studied (positive) 3D gadgets in origami extrusions which create a top face parallel to the ambient paper and two side faces sharing a ridge with two simple outgoing pleats. Then a natural problem comes up whether it is possible to construct a `negative' 3D gadget from any positive one having the same net without changing the outgoing pleats, that is, to sink the top… ▽ More In our previous two papers, we studied (positive) 3D gadgets in origami extrusions which create a top face parallel to the ambient paper and two side faces sharing a ridge with two simple outgoing pleats. Then a natural problem comes up whether it is possible to construct a `negative' 3D gadget from any positive one having the same net without changing the outgoing pleats, that is, to sink the top and two side faces of any positive 3D gadget to the reverse side without changing the outgoing pleats. Of course, simply sinking the faces causes a tear of the paper, and thus we have to modify the crease pattern. There are two known constructions of negative 3D gadgets before ours, but they do not solve this problem because their outgoing pleats are different from positive ones. In the present paper we give an affirmative solution to the above problem. For this purpose, we present three constructions of negative 3D gadgets with a supporting triangle on the back side, which are based on our previous ones of positive 3D gadgets. The first two are an extension of those presented in our previous paper, and the third is new. We prove that our first and third constructions solve the problem. Our solutions enable us to deal with positive and negative 3D gadgets on the same basis, so that we can construct from an origami extrusion constructed with 3D gadgets its negative using the same pleats if there are no interferences among the 3D gadgets. We also treat repetition/division of negative 3D gadgets under certain conditions, which reduces their interferences with others. △ Less

Submitted 30 April, 2021; originally announced May 2021.

Comments: 36 pages, 21 figures, 9 tables

Elastic Response of Wire Frame Glasses. II. Three Dimensional Systems

Authors: David A. King, Masao Doi, Erika Eiser

Abstract: We study the elastic response of rigid, wire frame particles in concentrated, glassy suspensions to a step strain by applying the simple, geometric methods developed in part I. The wire frame particles are comprised of thin, rigid rods of length $L$ and their number density, $ρ$, is such that $ρL^3 \gg 1$. We specifically compare rigid rods to L-shapes made of two equal length rods joined at right… ▽ More We study the elastic response of rigid, wire frame particles in concentrated, glassy suspensions to a step strain by applying the simple, geometric methods developed in part I. The wire frame particles are comprised of thin, rigid rods of length $L$ and their number density, $ρ$, is such that $ρL^3 \gg 1$. We specifically compare rigid rods to L-shapes made of two equal length rods joined at right angles. The behaviour of wire frames is found to be strikingly different from that of rods. The linear elasticity scales like $ρ^3 L^6$ for L-shaped particles, whereas it scales proportional to $ρ$ for rods and the non-linear response shows a transition from shear hardening to shear softening at a critical density $ρ_c \sim \sqrt{K / k_B T L^6}$, where $K$ is the bending modulus of the particles. For realistic particles made of double stranded DNA, this transition occurs at densities of about $ρL^3 \sim 10$. The reason for these differences is that wire frames can be forced to bend by the entanglements with their surroundings, whereas rods always remain straight. This is found to be very important even for small strains, with most particles being bent above a critical strain $γ_c \sim (ρL^3)^{-1}$. △ Less

Submitted 4 February, 2021; originally announced February 2021.

Comments: 9 pages, 4 figures

Elastic Response of Wire Frame Glasses. I. Two Dimensional Model

Authors: David A. King, Masao Doi, Erika Eiser

Abstract: We study the elastic response of concentrated suspensions of rigid wire frame particles to a step strain. These particles are constructed from infinitely thin, rigid rods of length $L$. We specifically compare straight rod-like particles to bent and branched wire frames. In dense suspensions the wire frames are frozen in a disordered state by the topological entanglements between their arms. We pr… ▽ More We study the elastic response of concentrated suspensions of rigid wire frame particles to a step strain. These particles are constructed from infinitely thin, rigid rods of length $L$. We specifically compare straight rod-like particles to bent and branched wire frames. In dense suspensions the wire frames are frozen in a disordered state by the topological entanglements between their arms. We present a simple, geometric method to find the scaling of the elastic stress with concentration in these glassy systems. We apply this method to a simple 2D model system where a test particle is placed on a plane and constrained by a random distribution of points with number density $ν$. Two striking differences between wire frame and rod suspensions are found: 1) The linear elasticity per particle for wire frames is very large, scaling like $ν^2 L^4$, whereas for rods it much smaller and independent of concentration. 2) Rods always shear thin but wire frames shear harden for densities less than $\sim \sqrt{K/k_B T L^4}$, where $K$ is the bending modulus of the particles. The deformation of wire frames is found to be important even for small strains, with the proportion of deformed particles at a particular strain, $γ$, being given by $(νL^2)^2 γ^2$. Our results agree well with a simple simulation of the 2D system. △ Less

Submitted 4 February, 2021; originally announced February 2021.

Comments: 14 pages, 7 figures

Enhanced electro-actuation in dielectric elastomers: the non-linear effect of free ions

Authors: Bin Zheng, Xingkun Man, David Andelman, Masao Doi

Abstract: Plasticized poly(vinyl chloride) (PVC) is a jelly-like soft dielectric material that attracted substantial interest recently as a new type of electro-active polymers. Under electric fields of several hundred Volt/mm, PVC gels undergo large deformations. These gels can be used as artificial muscles and other soft robotic devices, with striking deformation behavior that is quite different from conve… ▽ More Plasticized poly(vinyl chloride) (PVC) is a jelly-like soft dielectric material that attracted substantial interest recently as a new type of electro-active polymers. Under electric fields of several hundred Volt/mm, PVC gels undergo large deformations. These gels can be used as artificial muscles and other soft robotic devices, with striking deformation behavior that is quite different from conventional dielectric elastomers. Here, we present a simple model for the electro-activity of PVC gels, and show a non-linear effect of free ions on its dielectric behaviors. It is found that their particular deformation behavior is due to an electro-wetting effect and to a change in their interfacial tension. In addition, we derive analytical expressions for the surface tension as well as for the apparent dielectric constant of the gel. The theory indicates that the size of the mobile free ions has a crucial role in determining the electro-induced deformation, opening up the way to novel and innovative designs of electro-active gel actuators. △ Less

Submitted 15 May, 2022; v1 submitted 26 January, 2021; originally announced January 2021.

Journal ref: ACS Macro Lett. 10, 498 (2021)

A compact green Ti:Sapphire astro-comb with 43-GHz repetition frequency

Authors: Eunmi Chae, Eiji Kambe, Kentaro Motohara, Hideyuki Izumiura, Mamoru Doi, Kosuke Yoshioka

Abstract: A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linew… ▽ More A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linewidth. The radial velocity precision $σ\sim 1.4$ m/s is achieved at the High Dispersion Echelle Spectrosraph for the Okayama 188-cm telescope of the National Astronomical Observatory of Japan using our astro-comb. With further improvements of the mode-selecting cavity and removal of fiber modal noises, our system will provide a simple, compact, and precise astro-comb setup in visible wavelength region. △ Less

Submitted 14 January, 2021; originally announced January 2021.

Comments: 10 pages, 7 figures

Journal ref: Journal of the optical society of America B 38, 7, A1 (2021)

Intrinsic color diversity of nearby type Ia supernovae

Authors: Noriaki Arima, Mamoru Doi, Tomoki Morokuma, Naohiro Takanashi

Abstract: It has been reported that the extinction law for Type Ia Supernovae (SNe Ia) may be different from the one in the Milky Way, but the intrinsic color of SNe Ia and the dust extinction are observationally mixed. In this study, we examine photometric properties of SNe Ia in the nearby universe ($z \lesssim 0.04$) to investigate the SN Ia intrinsic color and the dust extinction. We focus on the Branch… ▽ More It has been reported that the extinction law for Type Ia Supernovae (SNe Ia) may be different from the one in the Milky Way, but the intrinsic color of SNe Ia and the dust extinction are observationally mixed. In this study, we examine photometric properties of SNe Ia in the nearby universe ($z \lesssim 0.04$) to investigate the SN Ia intrinsic color and the dust extinction. We focus on the Branch spectroscopic classification of 34 SNe Ia and morphological types of host galaxies. We carefully study their distribution of peak colors on the $B-V$, $V-R$ color-color diagram, as well as the color excess and absolute magnitude deviation from the stretch-color relation of the bluest SNe Ia. We find that SNe Ia which show the reddest color occur in early-type spirals and the trend holds when divided into Branch sub-types. The dust extinction becomes close to the Milky-Way like extinction if we exclude some peculiar red Broad Line (BL) sub-type SNe Ia. Furthermore, two of these red BLs occur in elliptical galaxies, less-dusty environment, suggesting intrinsic color diversity in BL sub-type SNe Ia. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: 25 pages, 7 figures, 3 tables. Accepted for Publications of the Astronomical Society of Japan (PASJ), December 2020

Cooper Triples in Attractive Three-Component Fermions: Implication for Hadron-Quark Crossover

Authors: Hiroyuki Tajima, Shoichiro Tsutsui, Takahiro M. Doi, Kei Iida

Abstract: We investigate many-body properties of equally populated three-component fermions with attractive three-body contact interaction in one dimension. A diagrammatic approach suggests the possible occurrence of Cooper triples at low temperature, which are three-body counterparts of Cooper pairs with a two-body attraction. We develop a minimal framework that bridges the crossover from tightly-bound tri… ▽ More We investigate many-body properties of equally populated three-component fermions with attractive three-body contact interaction in one dimension. A diagrammatic approach suggests the possible occurrence of Cooper triples at low temperature, which are three-body counterparts of Cooper pairs with a two-body attraction. We develop a minimal framework that bridges the crossover from tightly-bound trimers to Cooper triples with increasing chemical potential and show how the formation of Cooper triples occurs in the grand-canonical phase diagram. Moreover, we argue that this non-trivial crossover is similar to the hadron-quark crossover proposed in dense matter. A coexistence of medium-induced triples and the underlying Fermi sea at positive chemical potential is analogous to quarkyonic matter consisting of baryonic excitations and the underlying quark Fermi sea. The comparison with the existing quantum Monte Carlo results implies that the emergence of these kinds of three-body states can be a microscopic origin of the peak of the sound velocity along the crossover. △ Less

Submitted 8 October, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Comments: 10 pages, 6 figures

Journal ref: Phys. Rev. Research 4, L012021 (2022)

Wetting equilibrium in a rectangular channel

Authors: Tian Yu, Qicheng Sun, Chen Zhao, Jiajia Zhou, Masao Doi

Abstract: When a capillary channel with corners is wetted by a fluid, there are regions where the fluid fills the whole cross-section and regions where only the corners are filled by the fluid. The fluid fraction of the partially-filled region, $s^*$, is an important quantity related to the capillary pressure. We calculate the value of $s^*$ for channels with a cross-section slightly deviated from a rectang… ▽ More When a capillary channel with corners is wetted by a fluid, there are regions where the fluid fills the whole cross-section and regions where only the corners are filled by the fluid. The fluid fraction of the partially-filled region, $s^*$, is an important quantity related to the capillary pressure. We calculate the value of $s^*$ for channels with a cross-section slightly deviated from a rectangle: the height is larger in the center than those on the two short sides. We find that a small change in the cross-section geometry leads to a huge change of $s^*$. This result is consistent with experimental observations. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 23 pages, 8 figures, submitted to Soft Matter

Journal ref: Soft Matter 17, 3594 (2021)

Theoretical analysis for flattening of a rising bubble in a Hele-Shaw cell

Authors: Xianmin Xu, Masao Doi, Jiajia Zhou, Yana Di

Abstract: We calculate the shape and the velocity of a bubble rising in an infinitely large and closed Hele-Shaw cell using Park and Homsy's boundary condition which accounts for the change of the three dimensional structure in the perimeter zone. We first formulate the problem in the form of a variational problem, and discuss the shape change assuming that the bubble takes elliptic shape. We calculate the… ▽ More We calculate the shape and the velocity of a bubble rising in an infinitely large and closed Hele-Shaw cell using Park and Homsy's boundary condition which accounts for the change of the three dimensional structure in the perimeter zone. We first formulate the problem in the form of a variational problem, and discuss the shape change assuming that the bubble takes elliptic shape. We calculate the shape and the velocity of the bubble as a function of the bubble size, gap distance and the inclination angle of the cell. We show that the bubble is flattened as it rises. This result is in agreement with experiments for large Hele-Shaw cells. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Journal ref: Physics of Fluids, 2020

Relationship between Radar Cross Section and Optical Magnitude based on Radar and Optical Simultaneous Observations of Faint Meteors

Authors: Ryou Ohsawa, Akira Hirota, Kohei Morita, Shinsuke Abe, Daniel Kastinen, Johan Kero, Csilla Szasz, Yasunori Fujiwara, Takuji Nakamura, Koji Nishimura, Shigeyuki Sako, Jun-ichi Watanabe, Tsutomu Aoki, Noriaki Arima, Ko Arimatsu, Mamoru Doi, Makoto Ichiki, Shiro Ikeda, Yoshifusa Ita, Toshihiro Kasuga, Naoto Kobayashi, Mitsuru Kokubo, Masahiro Konishi, Hiroyuki Maehara, Takashi Miyata , et al. (18 additional authors not shown)

Abstract: Radar and optical simultaneous observations of meteors are important to understand the size distribution of the interplanetary dust. However, faint meteors detected by high power large aperture radar observations, which are typically as faint as 10 mag. in optical, have not been detected until recently in optical observations, mainly due to insufficient sensitivity of the optical observations. In… ▽ More Radar and optical simultaneous observations of meteors are important to understand the size distribution of the interplanetary dust. However, faint meteors detected by high power large aperture radar observations, which are typically as faint as 10 mag. in optical, have not been detected until recently in optical observations, mainly due to insufficient sensitivity of the optical observations. In this paper, two radar and optical simultaneous observations were organized. The first observation was carried out in 2009 to 2010 using Middle and Upper Atmosphere Radar (MU radar) and an image-intensified CCD camera. The second observation was carried out in 2018 using the MU radar and a mosaic CMOS camera, Tomo-e Gozen, mounted on the 1.05-m Kiso Schmidt Telescope. In total, 331 simultaneous meteors were detected. The relationship between radar cross sections and optical V-band magnitudes was well approximated by a linear function. A transformation function from the radar cross section to the V-band magnitude was derived for sporadic meteors. The transformation function was applied to about 150,000 meteors detected by the MU radar in 2009--2015, large part of which are sporadic, and a luminosity function was derived in the magnitude range of $-1.5$ to $9.5$ mag. The luminosity function was well approximated by a single power-law function with the population index of $r = 3.52{\pm}0.12$. The present observation indicates that the MU radar has capability to detect interplanetary dust of $10^{-5}$ to $10^{0}$ g in mass as meteors. △ Less

Submitted 5 February, 2021; v1 submitted 20 August, 2020; originally announced August 2020.

Comments: Accepted for publication in Planetary & Space Science. 20 pages, 8 figures

Journal ref: Planetary and Space Science 194 (2020) 10511

Improved flat-back 3D gadgets in origami extrusions completely downward compatible with the conventional pyramid-supported 3D gadgets

Authors: Mamoru Doi

Abstract: An origami extrusion is a folding of a 3D object in the middle of a flat piece of paper, using 3D gadgets which create faces with solid angles. In this paper we focus on 3D gadgets which create a top face parallel to the ambient paper and two side faces sharing a ridge, with two outgoing simple pleats, where a simple pleat is a pair of a mountain fold and a valley fold. There are two such types of… ▽ More An origami extrusion is a folding of a 3D object in the middle of a flat piece of paper, using 3D gadgets which create faces with solid angles. In this paper we focus on 3D gadgets which create a top face parallel to the ambient paper and two side faces sharing a ridge, with two outgoing simple pleats, where a simple pleat is a pair of a mountain fold and a valley fold. There are two such types of 3D gadgets. One is the conventional type of 3D gadgets with a triangular pyramid supporting the two side faces from inside. The other is the newer type of 3D gadgets presented in our previous paper, which improve the conventional ones in several respects: They have flat back sides above the ambient paper and no gap between the side faces; they are less interfering with adjacent gadgets so that we can make the extrusion higher at one time; they are downward compatible with conventional ones if constructible; they have a modified flat-back gadget used for repetition which does not interfere with adjacent gadgets; the angles of their outgoing pleats can be changed under certain conditions. However, there are cases where we can apply the conventional gadgets while we cannot our previous ones. The purpose of this paper is to improve our previous 3D gadgets to be completely downward compatible with the conventional ones, in the sense that any conventional gadget can be replaced by our improved one with the same outgoing pleats, but the converse is not always possible. To be more precise, we prove that for any given conventional 3D gadget there are an infinite number of improved 3D gadgets which are compatible with it, and the conventional 3D gadget can be replaced with any of these 3D gadgets without affecting any other conventional 3D gadget. Also, we see that our improved 3D gadget keep all of the above advantages over the conventional ones. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 33 pages, 19 figures. arXiv admin note: text overlap with arXiv:1908.07342

Universality of capillary rising in corners

Authors: Jiajia Zhou, Masao Doi

Abstract: We study the dynamics of capillary rising in corners. Using Onsager principle, we derive a partial differential equation that describes the time evolution of meniscus profile. We obtain both numerical solutions and self-similar solutions to this partial differential equation. Our results show that the advance of the meniscus front follows a time-scaling of $t^{1/3}$, in agreement with the experime… ▽ More We study the dynamics of capillary rising in corners. Using Onsager principle, we derive a partial differential equation that describes the time evolution of meniscus profile. We obtain both numerical solutions and self-similar solutions to this partial differential equation. Our results show that the advance of the meniscus front follows a time-scaling of $t^{1/3}$, in agreement with the experimental results and theoretical conjecture of Ponomarenko et al. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Comments: 9 pages, 3 figures, submitted to JFM

Journal ref: J. Fluid Mech. 900 (2020) A29

Drying Pathways of an Evaporating Soft Matter Droplet

Authors: Guangle Du, Fangfu Ye, Masao Doi, Fanlong Meng

Abstract: Micro-droplets of soft matter solutions have different morphologies upon drying, and can finally become wrinkled, buckled or cavitated particles. We investigate the morphology evolution of a drying soft matter droplet in this work: at the early stage of drying, wrinkling or cavitation instability can occur in the droplet, depending on the comparison between the critical wrinkling and cavitation pr… ▽ More Micro-droplets of soft matter solutions have different morphologies upon drying, and can finally become wrinkled, buckled or cavitated particles. We investigate the morphology evolution of a drying soft matter droplet in this work: at the early stage of drying, wrinkling or cavitation instability can occur in the droplet, depending on the comparison between the critical wrinkling and cavitation pressure; at a later stage of drying, no wrinkle will appear if cavitation happens first, while there can still be cavitation if wrinkling happens first. A three-dimensional phase diagram in the space of elastic length, gel layer thickness and weight loss is provided for illustrating these drying pathways of a soft matter droplet, which can guide future fabrications of micro-particles with desired morphologies. △ Less

Submitted 18 June, 2020; originally announced June 2020.

Comments: 13 pages, 3 figures

Low-Dimensional Fluctuations and Pseudogap in Gaudin-Yang Fermi Gases

Authors: Hiroyuki Tajima, Shoichiro Tsutsui, Takahiro M. Doi

Abstract: Pseudogap is a ubiquitous phenomenon in strongly correlated systems such as high-$T_{\rm c}$ superconductors, ultracold atoms and nuclear physics. While pairing fluctuations inducing the pseudogap are known to be enhanced in low-dimensional systems, such effects have not been explored well in one of the most fundamental 1D models, that is, Gaudin-Yang model. In this work, we show that the pseudoga… ▽ More Pseudogap is a ubiquitous phenomenon in strongly correlated systems such as high-$T_{\rm c}$ superconductors, ultracold atoms and nuclear physics. While pairing fluctuations inducing the pseudogap are known to be enhanced in low-dimensional systems, such effects have not been explored well in one of the most fundamental 1D models, that is, Gaudin-Yang model. In this work, we show that the pseudogap effect can be visible in the single-particle excitation in this system using a diagrammatic approach. Fermionic single-particle spectra exhibit a unique crossover from the double-particle dispersion to pseudogap state with increasing the attractive interaction and the number density at finite temperature. Surprisingly, our results of thermodynamic quantities in unpolarized and polarized gases show an excellent agreement with the recent quantum Monte Carlo and complex Langevin results, even in the region where the pseudogap appears. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Comments: 6 pages, 5 figures

Report number: RIKEN-iTHEMS-Report-20, RIKEN-QHP-478

Journal ref: Phys. Rev. Research 2, 033441 (2020)

Dynamics of a viscoelastic liquid filament connected to two mobile droplets

Authors: Jiajia Zhou, Masao Doi

Abstract: A filament of liquid is usually unstable and breaks up into small droplets, while a filament of polymer solution is known to be quite stable against such instability, and they form a stable configuration of filament connecting two spherical droplets. If the droplets are fixed in space, the liquid flows from the filament region to the droplet region to reduce the surface energy and the filament get… ▽ More A filament of liquid is usually unstable and breaks up into small droplets, while a filament of polymer solution is known to be quite stable against such instability, and they form a stable configuration of filament connecting two spherical droplets. If the droplets are fixed in space, the liquid flows from the filament region to the droplet region to reduce the surface energy and the filament gets thinner. If the whole liquid is placed in another viscous fluid, the droplets approach each other, and the filament can get thicker. Here we study the dynamics of such system. We derive time evolution equations for the radius and the length of the filament taking into account the fluid flux from filament to droplets and the motion of the droplets. We will show that (a) if the centers of the droplets are fixed, the filament thins following the classical prediction of Entov and Hinch, and that (b) if the droplets are mobile (subject to the Stokes drag in the viscous medium), the thinning of the filament is suppressed, and under certain conditions, the filament thickens. This theory explains the phenomena observed by Yang and Xu [Phys. Fluids 20, 043101 (2008)] in four-roller mill device. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 19 pages, 5 figures, submitted to Phys. Fluids

Journal ref: Phys. Fluids 32, 043101 (2020)

The HSC-SSP Transient Survey: Implications from Early Photometry and Rise Time of Normal Type Ia Supernovae

Authors: Ji-an Jiang, Naoki Yasuda, Keiichi Maeda, Mamoru Doi, Toshikazu Shigeyama, Nozomu Tominaga, Masaomi Tanaka, Takashi J. Moriya, Ichiro Takahashi, Nao Suzuki, Tomoki Morokuma, Ken'ichi Nomoto

Abstract: With a booming number of Type Ia supernovae (SNe Ia) discovered within a few days of their explosions, a fraction of SNe Ia that show luminosity excess in the early phase (early-excess SNe Ia) have been confirmed. In this article, we report early-phase observations of seven photometrically normal SNe Ia (six early detections and one deep non-detection limit) at the COSMOS field through a half-year… ▽ More With a booming number of Type Ia supernovae (SNe Ia) discovered within a few days of their explosions, a fraction of SNe Ia that show luminosity excess in the early phase (early-excess SNe Ia) have been confirmed. In this article, we report early-phase observations of seven photometrically normal SNe Ia (six early detections and one deep non-detection limit) at the COSMOS field through a half-year transient survey as a part of the Hyper Suprime-Cam Subaru Strategic Program (HSC SSP). In particular, a blue light-curve excess was discovered for HSC17bmhk, a normal SN Ia with rise time longer than 18.8 days, during the first four days after the discovery. The blue early excess in optical wavelength can be explained not only by interactions with a non-degenerate companion or surrounding dense circumstellar matter but also radiation powered by radioactive decays of $^{56}$Ni at the surface of the SN ejecta. Given the growing evidence of the early-excess discoveries in normal SNe Ia that have longer rise times than the average and a similarity in the nature of the blue excess to a luminous SN Ia subclass, we infer that early excess discovered in HSC17bmhk and other normal SNe Ia are most likely attributed to radioactive $^{56}$Ni decay at the surface of the SN ejecta. In order to successfully identify normal SNe Ia with early excess similar to that of HSC17bmhk, early UV photometries or high-cadence blue-band surveys are necessary. △ Less

Submitted 11 March, 2020; v1 submitted 25 February, 2020; originally announced February 2020.

Comments: 13 pages, 5 figures, accepted for publication in ApJ

Particle shapes leading to Newtonian dilute suspensions

Authors: David A. King, Masao Doi, Erika Eiser

Abstract: It is well known that suspensions of particles in a viscous fluid can affect the rheology significantly, producing a pronounced non-Newtonian response even in dilute suspension. However, it is unclear a priori which particle shapes lead to this behaviour. We present two simple symmetry conditions on the shape which are sufficient for a dilute suspension to be Newtonian for all strain sizes and one… ▽ More It is well known that suspensions of particles in a viscous fluid can affect the rheology significantly, producing a pronounced non-Newtonian response even in dilute suspension. However, it is unclear a priori which particle shapes lead to this behaviour. We present two simple symmetry conditions on the shape which are sufficient for a dilute suspension to be Newtonian for all strain sizes and one sufficient for Newtonian behavior for small strains. We also construct a class of shapes out of thin, rigid rods not found by the symmetry argument which share this property for small strains. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. E 102, 032615 (2020)

An optical search for transients lasting a few seconds

Authors: Michael W. Richmond, Masaomi Tanaka, Tomoki Morokuma, Shigeyuki Sako, Ryou Ohsawa, Noriaki Arima, Nozomu Tominaga, Mamoru Doi, Tsutomu Aoki, Ko Arimatsu, Makoto Ichiki, Shiro Ikeda, Yoshifusa Ita, Toshihiro Kasuga, Koji S. Kawabata, Hideyo Kawakita, Naoto Kobayashi, Mitsuru Kokubo, Masahiro Konishi, Hiroyuki Maehara, Hiroyuki Mito, Takashi Miyata, Yuki Mori, Mikio Morii, Kentaro Motohara , et al. (15 additional authors not shown)

Abstract: Using a prototype of the Tomo-e Gozen wide-field CMOS mosaic camera, we acquire wide-field optical images at a cadence of 2 Hz and search them for transient sources of duration 1.5 to 11.5 seconds. Over the course of eight nights, our survey encompasses the equivalent of roughly two days on one square degree, to a fluence equivalent to a limiting magnitude about $V = 15.6$ in a 1-second exposure.… ▽ More Using a prototype of the Tomo-e Gozen wide-field CMOS mosaic camera, we acquire wide-field optical images at a cadence of 2 Hz and search them for transient sources of duration 1.5 to 11.5 seconds. Over the course of eight nights, our survey encompasses the equivalent of roughly two days on one square degree, to a fluence equivalent to a limiting magnitude about $V = 15.6$ in a 1-second exposure. After examining by eye the candidates identified by a software pipeline, we find no sources which meet all our criteria. We compute upper limits to the rate of optical transients consistent with our survey, and compare those to the rates expected and observed for representative sources of ephemeral optical light. △ Less

Submitted 24 October, 2019; originally announced October 2019.

Comments: Accepted for publication in PASJ, 26 pages, 10 figures. The posted version here is our original manuscript, before any changes in response to the referee's comments; to see a copy of the version which was accepted for publication, go to http://spiff.rit.edu/richmond/pub/tomoe_trans.pdf

New constraint on the atmosphere of (50000) Quaoar from a stellar occultation

Authors: Ko Arimatsu, Ryou Ohsawa, George L. Hashimoto, Seitaro Urakawa, Jun Takahashi, Miyako Tozuka, Yoichi Itoh, Misato Yamashita, Fumihiko Usui, Tsutomu Aoki, Noriaki Arima, Mamoru Doi, Makoto Ichiki, Shiro Ikeda, Yoshifusa Ita, Toshihiro Kasuga, Naoto Kobayashi, Mitsuru Kokubo, Masahiro Konishi, Hiroyuki Maehara, Noriyuki Matsunaga, Takashi Miyata, Mikio Morii, Tomoki Morokuma, Kentaro Motohara , et al. (13 additional authors not shown)

Abstract: We report observations of a stellar occultation by the classical Kuiper belt object (50000) Quaoar occurred on 28 June 2019. A single-chord high-cadence (2 Hz) photometry dataset was obtained with the Tomo-e Gozen CMOS camera mounted on the 1.05 m Schmidt telescope at Kiso Observatory. The obtained ingress and egress data do not show any indication of atmospheric refraction and allow to set new… ▽ More We report observations of a stellar occultation by the classical Kuiper belt object (50000) Quaoar occurred on 28 June 2019. A single-chord high-cadence (2 Hz) photometry dataset was obtained with the Tomo-e Gozen CMOS camera mounted on the 1.05 m Schmidt telescope at Kiso Observatory. The obtained ingress and egress data do not show any indication of atmospheric refraction and allow to set new $1σ$ and $3σ$ upper limits of 6 and 16 nbar, respectively, for the surface pressure of a pure methane atmosphere. These upper limits are lower than the saturation vapor pressure of methane at Quaoar's expected mean surface temperature ($T \sim 44$ K) and imply the absence of a $\sim$10 nbar-level global atmosphere formed by methane ice on Quaoar's surface. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 12 pages, 3 figures, accepted for publication in the Astronomical Journal

A rapidly declining transient discovered with Subaru/Hyper Suprime-Cam

Authors: Nozomu Tominaga, Tomoki Morokuma, Masaomi Tanaka, Naoki Yasuda, Hisanori Furusawa, Masayuki Tanaka, Ji-an Jiang, Alexey Tolstov, Sergei Blinnikov, Mamoru Doi, Ikuru Iwata, Hanindyo Kuncarayakti, Takashi J. Moriya, Tohru Nagao, Ken'ichi Nomoto, Junichi Noumaru, Tadafumi Takata

Abstract: We perform a high-cadence transient survey with Subaru Hyper Suprime-Cam (HSC), which we call the Subaru HSC survey Optimized for Optical Transients (SHOOT). We conduct HSC imaging observations with time intervals of about one hour on two successive nights, and spectroscopic and photometric follow-up observations. A rapidly declining blue transient SHOOT14di at $z=0.4229$ is found in observations… ▽ More We perform a high-cadence transient survey with Subaru Hyper Suprime-Cam (HSC), which we call the Subaru HSC survey Optimized for Optical Transients (SHOOT). We conduct HSC imaging observations with time intervals of about one hour on two successive nights, and spectroscopic and photometric follow-up observations. A rapidly declining blue transient SHOOT14di at $z=0.4229$ is found in observations on two successive nights with an image subtraction technique. The rate of brightness change is $+1.28^{+0.40}_{-0.27}~{\rm mag~day^{-1}}$ ($+1.83^{+0.57}_{-0.39}~{\rm mag~day^{-1}}$) in the observer (rest) frame and the rest-frame color between $3400$ and $4400~\unicode[.8,0]{x212B}$ is $M_{\rm 3400\unicode[.8,0]{x212B}}-M_{\rm 4400\unicode[.8,0]{x212B}}=-0.4$. The nature of the object is investigated by comparing its peak luminosity, decline rate, and color with those of transients and variables previously observed, and those of theoretical models. None of the transients or variables share the same properties as SHOOT14di. Comparisons with theoretical models demonstrate that, while the emission from the cooling envelope of a Type IIb supernova shows a slower decline rate than SHOOT14di, and the explosion of a red supergiant star with a dense circumstellar wind shows a redder color than SHOOT14di, the shock breakout at the stellar surface of the explosion of a $25M_{\odot}$ red supergiant star with a small explosion energy of $\leq0.4\times10^{51}$ erg reproduces the multicolor light curve of SHOOT14di. This discovery shows that a high-cadence, multicolor optical transient survey at intervals of about one hour, and continuous and immediate follow-up observations, is important for studies of normal core-collapse supernovae at high redshifts. △ Less

Submitted 10 October, 2019; v1 submitted 7 September, 2019; originally announced September 2019.

Comments: 17 pages, 11 figures. Accepted for publication in the Astrophysical Journal

New efficient flat-back 3D gadgets in origami extrusions compatible with the conventional pyramid-supported 3D gadgets

Authors: Mamoru Doi

Abstract: An origami extrusion is a folding of a 3D object in the middle of a flat piece of paper, using 3D gadgets which create faces with solid angles. Our main concern is to make origami extrusions of polyhedrons using 3D gadgets with simple outgoing pleats, where a simple pleat is a pair of a mountain fold and a valley fold which are parallel to each other. In this paper we present a new type of 3D gadg… ▽ More An origami extrusion is a folding of a 3D object in the middle of a flat piece of paper, using 3D gadgets which create faces with solid angles. Our main concern is to make origami extrusions of polyhedrons using 3D gadgets with simple outgoing pleats, where a simple pleat is a pair of a mountain fold and a valley fold which are parallel to each other. In this paper we present a new type of 3D gadgets with simple outgoing pleats in origami extrusions and their construction. Our 3D gadgets are downward compatible with the conventional pyramid-supported gadgets developed by Calros Natan as a generalization of the cube gadget, in the sense that in many cases we can replace the conventional gadgets with the new ones with the same outgoing pleats while the converse is not always possible. We can also change angles of the outgoing pleats under certain conditions. Unlike the conventional pyramid-supported 3D gadgets, the new ones have flat back sides above the ambient paper, and thus we can make flat-foldable origami extrusions. Furthermore, since our new 3D gadgets are less interfering with adjacent gadgets than the conventional ones, we can use wider pleats at one time to make the extrusion higher. For example, we prove that the maximal height of the prism of any convex polygon (resp. any triangle) that can be extruded with our new gadgets is more than 4/3 times (resp. $\sqrt{2}$ times) of that with the conventional ones. We also present explicit constructions of division/repetition and negative versions of the new 3D gadgets. △ Less

Submitted 11 July, 2020; v1 submitted 8 August, 2019; originally announced August 2019.

Comments: 42 pages, 24 figures

Application of Onsager Machlup integral in solving dynamic equations in non-equilibrium systems

Authors: Masao Doi, Jiajia Zhou, Yana Di, Xianmin Xu

Abstract: In 1931, Onsager proposed a variational principle which has become the base of many kinetic equations for non-equilibrium systems. We have been showing that this principle is useful in obtaining approximate solutions for the kinetic equations, but our previous method has a weakness that it can be justified, strictly speaking, only for small incremental time. Here we propose an improved method whic… ▽ More In 1931, Onsager proposed a variational principle which has become the base of many kinetic equations for non-equilibrium systems. We have been showing that this principle is useful in obtaining approximate solutions for the kinetic equations, but our previous method has a weakness that it can be justified, strictly speaking, only for small incremental time. Here we propose an improved method which does not have this drawback. The new method utilizes the integral proposed by Onsager and Machlup in 1953, and can tell us which of the approximate solutions is the best solution without knowing the exact solution. The new method has an advantage that it allows us to determine the steady state in non-equilibrium system by a variational calculus. We demonstrate this using three examples, (a) simple diffusion problem, (b) capillary problem in a tube with corners, and (c) free boundary problem in liquid coating, for which the kinetic equations are written in second or fourth order partial differential equations. △ Less

Submitted 16 May, 2019; originally announced May 2019.

Comments: 25 pages, 7 figures, submitted to Phys. Rev. E

Journal ref: Phys. Rev. E 99, 063303 (2019)