-
CW Operation of the European XFEL: SC-Gun Injector Optimization, S2E Calculations and SASE Performance
Authors:
Dmitry Bazyl,
Ye Chen,
Martin Dohlus,
Torsten Limberg
Abstract:
This note presents optimization results for an injector with a super-conducting gun for the cw operation of the European XFEL, the corresponding start-to-end simulation calculations for the beam transport to the undulators and SASE calculations of the X-ray intensities for the achievable photon energies.
The optimizations for an injector with a super-conducting gun are done mainly for an already…
▽ More
This note presents optimization results for an injector with a super-conducting gun for the cw operation of the European XFEL, the corresponding start-to-end simulation calculations for the beam transport to the undulators and SASE calculations of the X-ray intensities for the achievable photon energies.
The optimizations for an injector with a super-conducting gun are done mainly for an already experimentally shown accelerating gradient of 40 MV/m. Different working points with respect to transverse emittance and bunch length are chosen to see whether the lower transverse emittance of the longer bunches survives the necessary stronger bunch compression to achieve comparable peak currents in the undulators. Also, results for possible further improvement of the gun gradient to 50 MV/m and a modified transverse laser profile (truncated Gaussian) are shown.
The S2E calculations are taking into account all relevant collective effects, including a thorough treatment of the impact of the so called Micro-Bunching Instability. For that purpose, tracking with the real number of particles is done, with a resolution in space and time fine enough to calculate instability growth model-free.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Superradiant Cherenkov-Wakefield radiation as THz source for FEL facilities
Authors:
Klaus Floettmann,
Francois Lemery,
Martin Dohlus,
Michaela Marx,
Mikayel Ivanyan,
Vasili Tsakanov
Abstract:
An electron beam passing through a tube which is lined on the inside with a dielectric layer will radiate energy in the THz range due to the interaction with the boundary. The resonant enhancement of certain frequencies is conditioned by structure parameters as tube radius and permittivity of the dielectric layer. In low loss structures narrow-band radiation is generated which can be coupled out b…
▽ More
An electron beam passing through a tube which is lined on the inside with a dielectric layer will radiate energy in the THz range due to the interaction with the boundary. The resonant enhancement of certain frequencies is conditioned by structure parameters as tube radius and permittivity of the dielectric layer. In low loss structures narrow-band radiation is generated which can be coupled out by suitable antennas. For higher frequencies the coupling to the resistive outer metal layer becomes increasingly important. The losses in the outer layer prohibit to reach high frequencies with narrow-band conditions. Instead short broad-band pulses can be generated with still attractive power levels. In the first section of the paper a general theory of the impedance of a two-layer structure is presented and the coupling to the outer resistive layer is discussed. Approximate relations for the radiated energy, power and pulse length for a set of structure parameters are derived and compared to numerical results in the following section. Finally first numerical result of the out-coupling of the radiation by means of a Vlasov antenna and estimates of the achieved beam quality are presented.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Axial representation of external electromagnetic fields for particle tracking in accelerators
Authors:
Igor Zagorodnov,
Martin Dohlus
Abstract:
We derive a power series representation of an arbitrary electromagnetic field near some axis through the coaxial field components on the axis. The obtained equations are compared with Fourier-Bessel series approach and verified by several examples. It is shown that for each azimuthal mode we need only two real functions on the axis in order to describe the field in a source free region near to it.…
▽ More
We derive a power series representation of an arbitrary electromagnetic field near some axis through the coaxial field components on the axis. The obtained equations are compared with Fourier-Bessel series approach and verified by several examples. It is shown that for each azimuthal mode we need only two real functions on the axis in order to describe the field in a source free region near to it. The representation of dipole mode in a superconducting radio-frequency gun is analyzed.
△ Less
Submitted 8 September, 2019;
originally announced September 2019.
-
Detuning related coupler kick variation of a superconducting nine-cell 1.3 GHz cavity
Authors:
Thorsten Hellert,
Martin Dohlus
Abstract:
Superconducting TESLA-type cavities are widely used to accelerate electrons in long bunch trains, such as in high repetition rate free electron lasers. The TESLA cavity is equipped with two higher order mode couplers and a fundamental power coupler (FPC), which break the axial symmetry of the cavity. The passing electrons therefore experience axially asymmetrical coupler kicks, which depend on the…
▽ More
Superconducting TESLA-type cavities are widely used to accelerate electrons in long bunch trains, such as in high repetition rate free electron lasers. The TESLA cavity is equipped with two higher order mode couplers and a fundamental power coupler (FPC), which break the axial symmetry of the cavity. The passing electrons therefore experience axially asymmetrical coupler kicks, which depend on the transverse beam position at the couplers and the rf phase. The resulting emittance dilution has been studied in detail in the literature. However, the kick induced by the FPC depends explicitly on the ratio of the forward to the backward traveling waves at the coupler, which has received little attention. The intention of this paper is to present the concept of discrete coupler kicks with a novel approach of separating the field disturbances related to the standing wave and a reflection dependent part. Particular attention is directed to the role of the penetration depth of the FPC antenna, which determines the loaded quality factor of the cavity. The developed beam transport model is compared to dedicated experiments at FLASH and European XFEL. Both the observed transverse coupling and detuning related coupler kick variations are in good agreement with the model. Finally, the expected trajectory variations due to coupler kick variations at European XFEL are investigated and results of numerical studies are presented.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Efficient model for low-energy transverse beam dynamics in a nine-cell 1.3 GHz cavity
Authors:
Thorsten Hellert,
Martin Dohlus,
Winfried Decking
Abstract:
FLASH and the European XFEL are SASE-FEL user facilities, at which superconducting TESLA cavities are operated in a pulsed mode to accelerate long bunch-trains. Several cavities are powered by one klystron. While the low-level rf system is able to stabilize the vector sum of the accelerating gradient of one rf station sufficiently, the rf parameters of individual cavities vary within the bunch-tra…
▽ More
FLASH and the European XFEL are SASE-FEL user facilities, at which superconducting TESLA cavities are operated in a pulsed mode to accelerate long bunch-trains. Several cavities are powered by one klystron. While the low-level rf system is able to stabilize the vector sum of the accelerating gradient of one rf station sufficiently, the rf parameters of individual cavities vary within the bunch-train. In correlation with misalignments, intrabunch-train trajectory variations are induced. An efficient model is developed to describe the effect at low beam energy, using numerically adjusted transfer matrices and discrete coupler kick coefficients, respectively. Comparison with start-to-end tracking and dedicated experiments at the FLASH injector will be shown. The short computation time of the derived model allows for comprehensive numerical studies on the impact of misalignments and variable rf parameters on the transverse intra-bunch-train beam stability at the injector module. Results from both, statistical multibunch performance studies and the deduction of misalignments from multibunch experiments are presented.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
Periodic Poisson Solver for Particle Tracking
Authors:
M. Dohlus,
Ch. Henning
Abstract:
A method is described to solve the Poisson problem for a three dimensional source distribution that is periodic into one direction. Perpendicular to the direction of periodicity a free space (or open) boundary is realized. In beam physics, this approach allows to calculate the space charge field of a continualized charged particle distribution with periodic pattern.
The method is based on a part…
▽ More
A method is described to solve the Poisson problem for a three dimensional source distribution that is periodic into one direction. Perpendicular to the direction of periodicity a free space (or open) boundary is realized. In beam physics, this approach allows to calculate the space charge field of a continualized charged particle distribution with periodic pattern.
The method is based on a particle mesh approach with equidistant grid and fast convolution with a Green's function. The periodic approach uses only one period of the source distribution, but a periodic extension of the Green's function.
The approach is numerically efficient and allows the investigation of periodic- and pseudo-periodic structures with period lengths that are small compared to the source dimensions, for instance of laser modulated beams or of the evolution of micro bunch structures. Applications for laser modulated beams are given.
△ Less
Submitted 6 May, 2015;
originally announced May 2015.
-
Fast Particle Tracking With Wake Fields
Authors:
M. Dohlus,
K. Flottmann,
C. Henning
Abstract:
Tracking calculations of charged particles in electromagnetic fields require in principle the simultaneous solution of the equation of motion and of Maxwell's equations. In many tracking codes a simpler and more efficient approach is used: external fields like that of the accelerating structures are provided as field maps, generated in separate computations and for the calculation of self fields t…
▽ More
Tracking calculations of charged particles in electromagnetic fields require in principle the simultaneous solution of the equation of motion and of Maxwell's equations. In many tracking codes a simpler and more efficient approach is used: external fields like that of the accelerating structures are provided as field maps, generated in separate computations and for the calculation of self fields the model of a particle bunch in uniform motion is used. We describe how an externally computed wake function can be approximated by a table of Taylor coefficients and how the wake field kick can be calculated for the particle distribution in a tracking calculation. The integrated kick, representing the effect of a distributed structure, is applied at a discrete time. As an example, we use our approach to calculate the emittance growth of a bunch in an undulator beam pipe due to resitive wall wake field effects.
△ Less
Submitted 25 January, 2012;
originally announced January 2012.
-
Generation and Characterization of Electron Bunches with Ramped Current Profiles in a Dual-Frequency Superconducting Linear Accelerator
Authors:
P. Piot,
C. Behrens,
C. Gerth,
M. Dohlus,
F. Lemery,
D. Mihalcea,
P. Stoltz,
M. Vogt
Abstract:
We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radiofrequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced $\sim 700$-MeV bunches have peak currents of the order of a kilo-…
▽ More
We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radiofrequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced $\sim 700$-MeV bunches have peak currents of the order of a kilo-Ampère. Data taken for various accelerator settings demonstrate the versatility of the method and in particular its ability to produce current profiles that have a quasi-linear dependency on the longitudinal (temporal) coordinate. The measured bunch parameters are shown, via numerical simulations, to produce gigavolt-per-meter peak accelerating electric fields with transformer ratios larger than 2 in dielectric-lined waveguides.
△ Less
Submitted 7 September, 2011;
originally announced September 2011.
-
Generation of attosecond soft x-ray pulses in a longitudinal space charge amplifier
Authors:
M. Dohlus,
E. A. Schneidmiller,
M. V. Yurkov
Abstract:
A longitudinal space charge amplifier (LSCA), operating in soft x-ray regime, was recently proposed. Such an amplifier consists of a few amplification cascades (focusing channel and chicane) and a short radiator undulator in the end. Broadband nature of LSCA supports generation of few-cycle pulses as well as wavelength compression. In this paper we consider an application of these properties of LS…
▽ More
A longitudinal space charge amplifier (LSCA), operating in soft x-ray regime, was recently proposed. Such an amplifier consists of a few amplification cascades (focusing channel and chicane) and a short radiator undulator in the end. Broadband nature of LSCA supports generation of few-cycle pulses as well as wavelength compression. In this paper we consider an application of these properties of LSCA for generation of attosecond x-ray pulses. It is shown that a compact and cheap addition to the soft x-ray free electron laser facility FLASH would allow to generate 60 attosecond (FWHM) long x-ray pulses with the peak power at 100 MW level and a contrast above 98%.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
A Semi-Analytical Modelling of Multistage Bunch Compression with Collective Effects
Authors:
Igor Zagorodnov,
Martin Dohlus
Abstract:
In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given.
In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given.
△ Less
Submitted 6 July, 2010;
originally announced July 2010.
-
High Frequency Impedances in European XFEL
Authors:
Martin Dohlus,
Igor Zagorodnov,
Olga Zagorodnova
Abstract:
The method of the optical approximation is used to estimate the high frequency impedances of different vacuum chamber transitions of the European XFEL beam line. The approximations of the longitudinal impedances are obtained in terms of simple one-dimensional integrals. The transverse impedances are written in analytical closed form. The analytical results are compared with the results obtained by…
▽ More
The method of the optical approximation is used to estimate the high frequency impedances of different vacuum chamber transitions of the European XFEL beam line. The approximations of the longitudinal impedances are obtained in terms of simple one-dimensional integrals. The transverse impedances are written in analytical closed form. The analytical results are compared with the results obtained by numerical solution of Maxwell's equations.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
-
Explicit TE/TM Scheme for Particle Beam Simulations
Authors:
M. Dohlus,
I. Zagorodnov
Abstract:
In this paper we propose an explicit two-level conservative scheme based on a TE/TM like splitting of the field components in time. Its dispersion properties are adjusted to accelerator problems. It is simpler and faster than the implicit version [1]. It does not have dispersion in the longitudinal direction and the dispersion properties in the transversal plane are improved. The explicit charac…
▽ More
In this paper we propose an explicit two-level conservative scheme based on a TE/TM like splitting of the field components in time. Its dispersion properties are adjusted to accelerator problems. It is simpler and faster than the implicit version [1]. It does not have dispersion in the longitudinal direction and the dispersion properties in the transversal plane are improved. The explicit character of the new scheme allows a uniformly stable conformal method without iterations and the scheme can be parallelized easily. It assures energy and charge conservation. A version of this explicit scheme for rotationally symmetric structures is free from the progressive time step reducing for higher order azimuthal modes as it takes place for Yee's explicit method used in the most popular electrodynamics codes.
△ Less
Submitted 8 January, 2009;
originally announced January 2009.
-
Start-to-End Simulations of SASE FEL at the TESLA Test Facility, Phase 1
Authors:
M. Dohlus,
K. Floettmann,
O. S. Kozlov,
T. Limberg,
Ph. Piot,
E. L. Saldin,
E. A. Schneidmiller,
M. V. Yurkov
Abstract:
Phase 1 of the vacuum ultra-violet (VUV) free-electron laser (FEL) at the TESLA Test Facility (TTF) recently concluded operation. It successfully demonstrated the saturation of a SASE FEL in the in the wavelength range of 80-120 nm. We present a posteriori start-to-end numerical simulations of this FEL. These simulations are based on the programs Astra and elegant for the generation and transpor…
▽ More
Phase 1 of the vacuum ultra-violet (VUV) free-electron laser (FEL) at the TESLA Test Facility (TTF) recently concluded operation. It successfully demonstrated the saturation of a SASE FEL in the in the wavelength range of 80-120 nm. We present a posteriori start-to-end numerical simulations of this FEL. These simulations are based on the programs Astra and elegant for the generation and transport of the electron distribution. An independent simulation of the intricate beam dynamics in the magnetic bunch compressor is performed with the program CSRtrack. The SASE FEL process is simulated with the code FAST. From our detailed simulations and the resulting phase space distribution at the undulator entrance, we found that the FEL was driven only by a small fraction (slice) of the electron bunch. This "lasing slice" is located in the head of the bunch, and has a peak current of approximately 3 kA. A strong energy chirp (due to the space charge field after compression) within this slice had a significant influence on the FEL operation. Our study shows that the radiation pulse duration is about 40 fs (FWHM) with a corresponding peak power of 1.5 GW. The simulated FEL properties are compared with various experimental data and found to be in excellent agreement.
△ Less
Submitted 11 December, 2003;
originally announced December 2003.
-
Transverse self-interactions within an electron bunch moving in an arc of a circle (generalized)
Authors:
Gianluca Geloni,
Jan Botman,
Marnix van der Wiel,
Martin Dohlus,
Evgeni Saldin,
Evgeni Schneidmiller,
Mikhail Yurkov
Abstract:
Transverse self-interactions within a "line" bunch of electrons moving in an arc of a circle have been studied extensively by us from an electrodynamical viewpoint. Here we treat an electron bunch with a given vertical (i.e. perpendicular to the orbital plane) size by a generalization of our previous work to the case of a test particle with vertical displacement interacting with a line bunch. In…
▽ More
Transverse self-interactions within a "line" bunch of electrons moving in an arc of a circle have been studied extensively by us from an electrodynamical viewpoint. Here we treat an electron bunch with a given vertical (i.e. perpendicular to the orbital plane) size by a generalization of our previous work to the case of a test particle with vertical displacement interacting with a line bunch. In fact, since a bunch with vertical extent can always be thought of as a superposition of displaced charge lines, all the relevant physical aspects of the problem are included in the study of that simple model. Our generalization results in a physically meaningful and quantitative explanation of the simulations obtained with the code $TraFiC^4$ as well as in successful cross-checking of the code.
△ Less
Submitted 9 April, 2003;
originally announced April 2003.
-
Transverse self-fields within an electron bunch moving in an arc of a circle
Authors:
Gianluca Geloni,
Jan Botman,
Jom Luiten,
Marnix van der Wiel,
Martin Dohlus,
Evgeni Saldin,
Evgeni Schneidmiller,
Mikhail Yurkov
Abstract:
As a consequence of motions driven by external forces, self-fields (which are different from the static case) originate within an electron bunch. In the case of magnetic external forces acting on an ultrarelativistic beam, the longitudinal self-interactions are responsible for CSR (Coherent Synchrotron Radiation)-related phenomena, which have been studied extensively. On the other hand, transver…
▽ More
As a consequence of motions driven by external forces, self-fields (which are different from the static case) originate within an electron bunch. In the case of magnetic external forces acting on an ultrarelativistic beam, the longitudinal self-interactions are responsible for CSR (Coherent Synchrotron Radiation)-related phenomena, which have been studied extensively. On the other hand, transverse self-interactions are present too. At the time being, existing theoretical analysis of transverse self-forces deal with the case of a bunch moving along a circular orbit only, without considering the situation of a bending magnet with a finite length. In this paper we propose an electrodynamical analysis of transverse self-fields which originate, at the position of a test particle, from an ultrarelativistic electron bunch moving in an arc of a circle. The problem will be first addressed within a two-particle system. We then extend our consideration to a line bunch with a stepped density distribution, a situation which can be easily generalized to the case of an arbitrary density distribution. Our approach turns out to be also useful in order to get a better insight in the physics involved in the case of simple circular motion and in order to address the well known issue of the partial compensation of transverse self-force.
△ Less
Submitted 1 May, 2002;
originally announced May 2002.
-
Numerical Calculation of Coherent Synchrotron Radiation Effects Using TraFiC4
Authors:
A. Kabel,
M. Dohlus,
T. Limberg
Abstract:
Coherent synchrotron radiation (CSR) occurs when short bunches travel on strongly bent trajectories. Its effects on high-quality beams can be severe and are well understood qualitatively. For quantitative results, however, one has to rely on numerical methods. There exist several simulation codes utilizing different approaches. We describe in some detail the code TraFiC4 developed at DESY for de…
▽ More
Coherent synchrotron radiation (CSR) occurs when short bunches travel on strongly bent trajectories. Its effects on high-quality beams can be severe and are well understood qualitatively. For quantitative results, however, one has to rely on numerical methods. There exist several simulation codes utilizing different approaches. We describe in some detail the code TraFiC4 developed at DESY for design and analysis purposes, which approaches the problem from first principles and solves the equations of motion either perturbatively or self-consistently. We present some calculational results and comparison with experimental data. Also, we give examples of how the code can be used to design beamlines with minimal emittance growth due to CSR.
△ Less
Submitted 25 September, 2000;
originally announced September 2000.
-
Rectangular Waveguide HOM Couplers for a TESLA Superstructure
Authors:
A. Blednykh,
D. Kostin,
V. Kaljuzhny,
M. Lalayan,
O. Milovanov,
A. Ponomarenko,
N. Sobenin,
A. Sulimov,
D. Trubin,
A. Zavadzev,
M. Dohlus
Abstract:
Some modifications of a Rectangular Waveguide HOM couplers for TESLA superstructure have been investigated. These RWG HOM couplers are to be installed between the cavities of the superstructure and also at the both ends of it. We investigated a RWG HOM coupler attached to the beam pipe through the slots orientated along beam pipe axis (longitudinal slots), perpendicular to it (azimutal slots) an…
▽ More
Some modifications of a Rectangular Waveguide HOM couplers for TESLA superstructure have been investigated. These RWG HOM couplers are to be installed between the cavities of the superstructure and also at the both ends of it. We investigated a RWG HOM coupler attached to the beam pipe through the slots orientated along beam pipe axis (longitudinal slots), perpendicular to it (azimutal slots) and at some angle to this axis. For dipole modes of both polarizations dam** two RWG in every design were used. This paper presents the results obtained for scaled-up setup at 3 GHz at room temperature. The advantages of HOM coupler with longitudinal slots for dam** dipole modes and compact HOM coupler with slots at some angle to the axis are shown. Arrangement of HOM coupler in cryostat and heating due to HOM and FM losses are presented. Calculations and design of the feeding RWG coupler for superstructure are also presented.
△ Less
Submitted 1 August, 2000;
originally announced August 2000.
