-
Explainable Classification Techniques for Quantum Dot Device Measurements
Authors:
Daniel Schug,
Tyler J. Kovach,
M. A. Wolfe,
Jared Benson,
Sanghyeok Park,
J. P. Dodson,
J. Corrigan,
M. A. Eriksson,
Justyna P. Zwolak
Abstract:
In the physical sciences, there is an increased need for robust feature representations of image data: image acquisition, in the generalized sense of two-dimensional data, is now widespread across a large number of fields, including quantum information science, which we consider here. While traditional image features are widely utilized in such cases, their use is rapidly being supplanted by Neura…
▽ More
In the physical sciences, there is an increased need for robust feature representations of image data: image acquisition, in the generalized sense of two-dimensional data, is now widespread across a large number of fields, including quantum information science, which we consider here. While traditional image features are widely utilized in such cases, their use is rapidly being supplanted by Neural Network-based techniques that often sacrifice explainability in exchange for high accuracy. To ameliorate this trade-off, we propose a synthetic data-based technique that results in explainable features. We show, using Explainable Boosting Machines (EBMs), that this method offers superior explainability without sacrificing accuracy. Specifically, we show that there is a meaningful benefit to this technique in the context of quantum dot tuning, where human intervention is necessary at the current stage of development.
△ Less
Submitted 7 May, 2024; v1 submitted 21 February, 2024;
originally announced February 2024.
-
Latched readout for the quantum dot hybrid qubit
Authors:
J. Corrigan,
J. P. Dodson,
Brandur Thorgrimsson,
Samuel F. Neyens,
T. J. Knapp,
Thomas McJunkin,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
A primary method of reading out a quantum dot hybrid qubit involves projection of the logical basis onto distinct charge states that are readily detected by an integrated charge sensing dot. However, in the simplest configuration, the excited charge state decays rapidly, making single-shot readout challenging. Here, we demonstrate a readout procedure where the qubit excited state is latched to a m…
▽ More
A primary method of reading out a quantum dot hybrid qubit involves projection of the logical basis onto distinct charge states that are readily detected by an integrated charge sensing dot. However, in the simplest configuration, the excited charge state decays rapidly, making single-shot readout challenging. Here, we demonstrate a readout procedure where the qubit excited state is latched to a metastable charge configuration whose lifetime is tunnel rate limited, persisting here as long as 2.5 ms. Additionally, we show that working in the (4,1)-(3,2) charge configuration enables a latched readout window that is larger and more tunable than typical charge configurations, because the size of the readout window is determined by an orbital splitting rather than a valley splitting.
△ Less
Submitted 15 October, 2022;
originally announced October 2022.
-
SiGe quantum wells with oscillating Ge concentrations for quantum dot qubits
Authors:
Thomas McJunkin,
Benjamin Harpt,
Yi Feng,
Merritt P. Losert,
Rajib Rahman,
J. P. Dodson,
M. A. Wolfe,
D. E. Savage,
M. G. Lagally,
S. N. Coppersmith,
Mark Friesen,
Robert Joynt,
M. A. Eriksson
Abstract:
Large-scale arrays of quantum-dot spin qubits in Si/SiGe quantum wells require large or tunable energy splittings of the valley states associated with degenerate conduction band minima. Existing proposals to deterministically enhance the valley splitting rely on sharp interfaces or modifications in the quantum well barriers that can be difficult to grow. Here, we propose and demonstrate a new hete…
▽ More
Large-scale arrays of quantum-dot spin qubits in Si/SiGe quantum wells require large or tunable energy splittings of the valley states associated with degenerate conduction band minima. Existing proposals to deterministically enhance the valley splitting rely on sharp interfaces or modifications in the quantum well barriers that can be difficult to grow. Here, we propose and demonstrate a new heterostructure, the "Wiggle Well," whose key feature is Ge concentration oscillations inside the quantum well. Experimentally, we show that placing Ge in the quantum well does not significantly impact our ability to form and manipulate single-electron quantum dots. We further observe large and widely tunable valley splittings, from 54 to 239 ueV. Tight-binding calculations, and the tunability of the valley splitting, indicate that these results can mainly be attributed to random concentration fluctuations that are amplified by the presence of Ge alloy in the heterostructure, as opposed to a deterministic enhancement due to the concentration oscillations. Quantitative predictions for several other heterostructures point to the Wiggle Well as a robust method for reliably enhancing the valley splitting in future qubit devices.
△ Less
Submitted 15 December, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Valley splittings in Si/SiGe quantum dots with a germanium spike in the silicon well
Authors:
Thomas McJunkin,
E. R. MacQuarrie,
Leah Tom,
S. F. Neyens,
J. P. Dodson,
Brandur Thorgrimsson,
J. Corrigan,
H. Ekmel Ercan,
D. E. Savage,
M. G. Lagally,
Robert Joynt,
S. N. Coppersmith,
Mark Friesen,
M. A. Eriksson
Abstract:
Silicon-germanium heterostructures have successfully hosted quantum dot qubits, but the intrinsic near-degeneracy of the two lowest valley states poses an obstacle to high fidelity quantum computing. We present a modification to the Si/SiGe heterostructure by the inclusion of a spike in germanium concentration within the quantum well in order to increase the valley splitting. The heterostructure i…
▽ More
Silicon-germanium heterostructures have successfully hosted quantum dot qubits, but the intrinsic near-degeneracy of the two lowest valley states poses an obstacle to high fidelity quantum computing. We present a modification to the Si/SiGe heterostructure by the inclusion of a spike in germanium concentration within the quantum well in order to increase the valley splitting. The heterostructure is grown by chemical vapor deposition and magnetospectroscopy is performed on gate-defined quantum dots to measure the excited state spectrum. We demonstrate a large and widely tunable valley splitting as a function of applied vertical electric field and lateral dot confinement. We further investigate the role of the germanium spike by means of tight-binding simulations in single-electron dots and show a robust doubling of the valley splitting when the spike is present, as compared to a standard (spike-free) heterostructure. This doubling effect is nearly independent of the electric field, germanium content of the spike, and spike location. This experimental evidence of a stable, tunable quantum dot, despite a drastic change to the heterostructure, provides a foundation for future heterostructure modifications.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
How valley-orbit states in silicon quantum dots probe quantum well interfaces
Authors:
J. P. Dodson,
H. Ekmel Ercan,
J. Corrigan,
Merritt Losert,
Nathan Holman,
Thomas McJunkin,
L. F. Edge,
Mark Friesen,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
The energies of valley-orbit states in silicon quantum dots are determined by an as yet poorly understood interplay between interface roughness, orbital confinement, and electron interactions. Here, we report measurements of one- and two-electron valley-orbit state energies as the dot potential is modified by changing gate voltages, and we calculate these same energies using full configuration int…
▽ More
The energies of valley-orbit states in silicon quantum dots are determined by an as yet poorly understood interplay between interface roughness, orbital confinement, and electron interactions. Here, we report measurements of one- and two-electron valley-orbit state energies as the dot potential is modified by changing gate voltages, and we calculate these same energies using full configuration interaction calculations. The results enable an understanding of the interplay between the physical contributions and enable a new probe of the quantum well interface.
△ Less
Submitted 6 April, 2022; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Coherent control and spectroscopy of a semiconductor quantum dot Wigner molecule
Authors:
J. Corrigan,
J. P. Dodson,
H. Ekmel Ercan,
J. C. Abadillo-Uriel,
Brandur Thorgrimsson,
T. J. Knapp,
Nathan Holman,
Thomas McJunkin,
Samuel F. Neyens,
E. R. MacQuarrie,
Ryan H. Foote,
L. F. Edge,
Mark Friesen,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
Multi-electron semiconductor quantum dots have found wide application in qubits, where they enable readout and enhance polarizability. However, coherent control in such dots has typically been restricted to only the lowest two levels, and such control in the strongly interacting regime has not been realized. Here we report quantum control of eight different resonances in a silicon-based quantum do…
▽ More
Multi-electron semiconductor quantum dots have found wide application in qubits, where they enable readout and enhance polarizability. However, coherent control in such dots has typically been restricted to only the lowest two levels, and such control in the strongly interacting regime has not been realized. Here we report quantum control of eight different resonances in a silicon-based quantum dot. We use qubit readout to perform spectroscopy, revealing a dense set of energy levels with characteristic spacing far smaller than the single-particle energy. By comparing with full configuration interaction calculations, we argue that the dense set of levels arises from Wigner-molecule physics.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Microwave Engineering for Semiconductor Quantum Dots in a cQED Architecture
Authors:
Nathan Holman,
J. P. Dodson,
L. F. Edge,
S. N. Coppersmith,
M. Friesen,
R. McDermott,
M. A. Eriksson
Abstract:
We develop an engineered microwave environment for coupling high Q superconducting resonators to quantum dots using a multilayer fabrication stack for the dot control wiring. Analytic and numerical models are presented to understand how parasitic capacitive coupling to the dot bias leads can result in microwave energy leakage and low resonator quality factors. We show that by controlling the chara…
▽ More
We develop an engineered microwave environment for coupling high Q superconducting resonators to quantum dots using a multilayer fabrication stack for the dot control wiring. Analytic and numerical models are presented to understand how parasitic capacitive coupling to the dot bias leads can result in microwave energy leakage and low resonator quality factors. We show that by controlling the characteristic impedance of the dot bias wiring, on-chip quality factors of 8140 can be attained without the addition of explicit filtering. Using this approach we demonstrate single electron occupation in double and triple dots detected via dipole or quadrupole coupling to a superconducting resonator. Additionally, by using multilayer fabrication we are able to improve ground plane integrity and keep microwave crosstalk below -20 dB out to 18 GHz while maintaining high wire density which will be necessary for future circuit quantum electrodyanmics (cQED) quantum dot processors.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Fabrication process and failure analysis for robust quantum dots in silicon
Authors:
J. P. Dodson,
Nathan Holman,
Brandur Thorgrimsson,
Samuel F. Neyens,
E. R. MacQuarrie,
Thomas McJunkin,
Ryan H. Foote,
L. F. Edge,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
We present an improved fabrication process for overlap** aluminum gate quantum dot devices on Si/SiGe heterostructures that incorporates low-temperature inter-gate oxidation, thermal annealing of gate oxide, on-chip electrostatic discharge (ESD) protection, and an optimized interconnect process for thermal budget considerations. This process reduces gate-to-gate leakage, damage from ESD, dewetti…
▽ More
We present an improved fabrication process for overlap** aluminum gate quantum dot devices on Si/SiGe heterostructures that incorporates low-temperature inter-gate oxidation, thermal annealing of gate oxide, on-chip electrostatic discharge (ESD) protection, and an optimized interconnect process for thermal budget considerations. This process reduces gate-to-gate leakage, damage from ESD, dewetting of aluminum, and formation of undesired alloys in device interconnects. Additionally, cross-sectional scanning transmission electron microscopy (STEM) images elucidate gate electrode morphology in the active region as device geometry is varied. We show that overlap** aluminum gate layers homogeneously conform to the topology beneath them, independent of gate geometry, and identify critical dimensions in the gate geometry where pattern transfer becomes non-ideal, causing device failure.
△ Less
Submitted 15 September, 2020; v1 submitted 12 April, 2020;
originally announced April 2020.
-
Progress Towards a Capacitively Mediated CNOT Between Two Charge Qubits in Si/SiGe
Authors:
E. R. MacQuarrie,
Samuel F. Neyens,
J. P. Dodson,
J. Corrigan,
Brandur Thorgrimsson,
Nathan Holman,
M. Palma,
L. F. Edge,
Mark Friesen,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
Fast operations, an easily tunable Hamiltonian, and a straightforward two-qubit interaction make charge qubits a useful tool for benchmarking device performance and exploring two-qubit dynamics. Here, we tune a linear chain of four Si/SiGe quantum dots to host two double dot charge qubits. Using the capacitance between the double dots to mediate a strong two-qubit interaction, we simultaneously dr…
▽ More
Fast operations, an easily tunable Hamiltonian, and a straightforward two-qubit interaction make charge qubits a useful tool for benchmarking device performance and exploring two-qubit dynamics. Here, we tune a linear chain of four Si/SiGe quantum dots to host two double dot charge qubits. Using the capacitance between the double dots to mediate a strong two-qubit interaction, we simultaneously drive coherent transitions to generate correlations between the qubits. We then sequentially pulse the qubits to drive one qubit conditionally on the state of the other. We find that a conditional $π$-rotation can be driven in just 74 ps with a modest fidelity demonstrating the possibility of two-qubit operations with a 13.5 GHz clockspeed.
△ Less
Submitted 15 March, 2020;
originally announced March 2020.
-
Auto-tuning of double dot devices in situ with machine learning
Authors:
Justyna P. Zwolak,
Thomas McJunkin,
Sandesh S. Kalantre,
J. P. Dodson,
E. R. MacQuarrie,
D. E. Savage,
M. G. Lagally,
S. N. Coppersmith,
Mark A. Eriksson,
Jacob M. Taylor
Abstract:
The current practice of manually tuning quantum dots (QDs) for qubit operation is a relatively time-consuming procedure that is inherently impractical for scaling up and applications. In this work, we report on the {\it in situ} implementation of a recently proposed autotuning protocol that combines machine learning (ML) with an optimization routine to navigate the parameter space. In particular,…
▽ More
The current practice of manually tuning quantum dots (QDs) for qubit operation is a relatively time-consuming procedure that is inherently impractical for scaling up and applications. In this work, we report on the {\it in situ} implementation of a recently proposed autotuning protocol that combines machine learning (ML) with an optimization routine to navigate the parameter space. In particular, we show that a ML algorithm trained using exclusively simulated data to quantitatively classify the state of a double-QD device can be used to replace human heuristics in the tuning of gate voltages in real devices. We demonstrate active feedback of a functional double-dot device operated at millikelvin temperatures and discuss success rates as a function of the initial conditions and the device performance. Modifications to the training network, fitness function, and optimizer are discussed as a path toward further improvement in the success rate when starting both near and far detuned from the target double-dot range.
△ Less
Submitted 1 April, 2020; v1 submitted 17 September, 2019;
originally announced September 2019.
-
Measurements of capacitive coupling within a quadruple quantum dot array
Authors:
Samuel F. Neyens,
E. R. MacQuarrie,
J. P. Dodson,
J. Corrigan,
Nathan Holman,
Brandur Thorgrimsson,
M. Palma,
Thomas McJunkin,
L. F. Edge,
Mark Friesen,
S. N. Coppersmith,
M. A. Eriksson
Abstract:
We present measurements of the capacitive coupling energy and the inter-dot capacitances in a linear quadruple quantum dot array in undoped Si/SiGe. With the device tuned to a regime of strong ($>$1 GHz) intra-double dot tunnel coupling, as is typical for double dot qubits, we measure a capacitive coupling energy of $20.9 \pm 0.3$ GHz. In this regime, we demonstrate a fitting procedure to extract…
▽ More
We present measurements of the capacitive coupling energy and the inter-dot capacitances in a linear quadruple quantum dot array in undoped Si/SiGe. With the device tuned to a regime of strong ($>$1 GHz) intra-double dot tunnel coupling, as is typical for double dot qubits, we measure a capacitive coupling energy of $20.9 \pm 0.3$ GHz. In this regime, we demonstrate a fitting procedure to extract all the parameters in the 4D Hamiltonian for two capacitively coupled charge qubits from a 2D slice through the quadruple dot charge stability diagram. We also investigate the tunability of the capacitive coupling energy, using inter-dot barrier gate voltages to tune the inter- and intra-double dot capacitances, and change the capacitive coupling energy of the double dots over a range of 15-32 GHz. We provide a model for the capacitive coupling energy based on the electrostatics of a network of charge nodes joined by capacitors, which shows how the coupling energy should depend on inter-double dot and intra-double dot capacitances in the network, and find that the expected trends agree well with the measurements of coupling energy.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.