Showing 1–50 of 58 results for author: Divoux, T

Rheological properties of acid-induced carboxymethylcellulose hydrogels

Authors: Gauthier Legrand, Guilhem P. Baeza, Sébastien Manneville, Thibaut Divoux

Abstract: Cellulose ethers represent a class of water-soluble polymers widely utilized across diverse sectors, spanning from healthcare to the construction industry. This experimental study specifically delves into aqueous suspensions of carboxymethylcellulose (CMC), a polymer that undergoes gel formation in acidic environments due to attractive interactions between hydrophobic patches along its molecular c… ▽ More Cellulose ethers represent a class of water-soluble polymers widely utilized across diverse sectors, spanning from healthcare to the construction industry. This experimental study specifically delves into aqueous suspensions of carboxymethylcellulose (CMC), a polymer that undergoes gel formation in acidic environments due to attractive interactions between hydrophobic patches along its molecular chain. We use rheometry to determine the linear viscoelastic properties of both CMC suspensions and acid-induced gels at various temperatures. Then, applying the time-temperature superposition principle, we construct master curves for the viscoelastic spectra, effectively described by fractional models. The horizontal shift factors exhibit an Arrhenius-like temperature dependence, allowing us to extract activation energies compatible with hydrophobic interactions. Furthermore, we show that acid-induced CMC gels are physical gels that display a reversible yielding transition under external shear. In particular, we discuss the influence of pH on the non-linear viscoelastic response under large-amplitude oscillatory shear. Overall, our results offer a comprehensive description of the linear and non-linear rheological properties of a compelling case of physical hydrogel involving hydrophobic interactions. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Comments: 23 pages, 9 figures

Discrepancies in dynamic yield stress measurements of cement pastes

Authors: Subhransu Dhar, Teresa Liberto, Catherine Barentin, Thibaut Divoux, Agathe Robisson

Abstract: The dynamic yield stress associated with the flow cessation of cement pastes is measured using a rheometer equipped with various shear geometries such as vane, helical, sandblasted co-axial cylinders, and serrated parallel plates, as well as with the mini-cone spread test. Discrepancies in yield stress values are observed for cement pastes at various volume fractions, with one to two orders of mag… ▽ More The dynamic yield stress associated with the flow cessation of cement pastes is measured using a rheometer equipped with various shear geometries such as vane, helical, sandblasted co-axial cylinders, and serrated parallel plates, as well as with the mini-cone spread test. Discrepancies in yield stress values are observed for cement pastes at various volume fractions, with one to two orders of magnitude difference between vane, helical and mini-cone spread measurements on the one hand, and co-axial cylinder and parallel plate measurements on the other hand. To understand this discrepancy, the flow profile of a cement paste in the parallel-plate geometry is investigated with a high-speed camera, revealing the rapid formation of an un-sheared band near the static bottom plate. The width of this band depends upon the rotational velocity of the top plate, and upon the shear time. Recalculation of shear stress shows that the reduced sheared gap alone cannot explain the low measured yield stress. Further exploration suggests the formation of zones with lower particle content, possibly linked to cement particle sedimentation. Here, we argue that the complex nature of cement pastes, composed of negatively buoyant non-Brownian particles with attractive interactions due to highly charged nano-size hydration products, accounts for their complex rheological behavior. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: Submitted to Journal Rheologica Acta for the peer review process on 13-March-2024, 11 figures. Also includes supplementary information with 5 figures

Two-step aging dynamics in enzymatic milk gels

Authors: Julien Bauland, Gouranga Manna, Thibaut Divoux, Thomas Gibaud

Abstract: Colloidal gels undergo a phenomenon known as physical aging, i.e., a continuous change of their physical properties with time after the gel point. To date, most of the research effort on aging in gels has been focused on suspensions of hard colloidal particles. In this letter, we tackle the case of soft colloidal "micelles" comprised of proteins, where gelation is induced by the addition of an enz… ▽ More Colloidal gels undergo a phenomenon known as physical aging, i.e., a continuous change of their physical properties with time after the gel point. To date, most of the research effort on aging in gels has been focused on suspensions of hard colloidal particles. In this letter, we tackle the case of soft colloidal "micelles" comprised of proteins, where gelation is induced by the addition of an enzyme. Using time-resolved mechanical spectroscopy, we monitor the viscoelastic properties of a suspension of colloidal micelles through the sol-gel transition and its subsequent aging. We show that the microscopic scenario underpinning the macroscopic aging dynamics comprises two sequential steps. First, the gel microstructure undergoes rapid coarsening, as observed by optical microscopy, followed by arrest. Second, aging occurs solely through a contact-driven mechanism, as evidenced by the square-root dependence of the yield stress with the elastic modulus measured at different ages of the gel. These results provide a comprehensive understanding of aging in enzymatic milk gels, which is crucial not only for a broad range of dairy products, but also for soft colloids in general. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Textural properties of dense granular pastes produced by kneading

Authors: Mathilde Auxois, Marine Minière, Chloé Bertrand-Drira, Fabien Salvatori, Jan Verstraete, Sébastien Manneville, Thibaut Divoux

Abstract: The efficiency of supported catalysts depends on the porous microstructure of their solid support, which regulates mass transfer, exposure to the active phase, and mechanical strength. Here, we focus on the manufacturing of a specific type of catalytic support, $γ$-alumina extrudates, by a kneading-extrusion process. In this process, a paste is initially formed by blending and subsequently kneadin… ▽ More The efficiency of supported catalysts depends on the porous microstructure of their solid support, which regulates mass transfer, exposure to the active phase, and mechanical strength. Here, we focus on the manufacturing of a specific type of catalytic support, $γ$-alumina extrudates, by a kneading-extrusion process. In this process, a paste is initially formed by blending and subsequently kneading a boehmite powder, an aluminum oxide hydroxide precursor of $γ$-alumina, with various liquids before undergoing extrusion. The crucial step in this process is the kneading step, which allows control over the textural and mechanical properties of the extrudate. The present experimental study aims to measure the impact of the kneading step on boehmite pastes prepared using a pilot kneader. The pastes are obtained by mixing boehmite powder with an acid and a basic solution in a two-step process known as peptization and neutralization. In this study, kneading is conducted at various mixing speeds and durations while monitoring the torque exerted by the boehmite paste on the kneader blades. Moreover, samples are extracted from the pilot kneader at various stages of the kneading process, and their textural properties are determined by both nitrogen sorption and mercury intrusion porosimetry. Our findings show that, at fixed composition, the textural properties of boehmite pastes are controlled by the overall deformation accumulated during kneading. Conversely, for a fixed accumulated deformation, the pH sets the textural properties. Finally, we identify an empirical control parameter that captures the combined effects of pH and accumulated deformation on the key textural attributes of boehmite pastes. These results set the stage for a systematic design approach of boehmite-based catalyst supports. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 14 pages, 13 figures

Ductile-to-brittle transition and yielding in soft amorphous materials: perspectives and open questions

Authors: Thibaut Divoux, Elisabeth Agoritsas, Stefano Aime, Catherine Barentin, Jean-Louis Barrat, Roberto Benzi, Ludovic Berthier, Dapeng Bi, Giulio Biroli, Daniel Bonn, Philippe Bourrianne, Mehdi Bouzid, Emanuela Del Gado, Hélène Delanoë-Ayari, Kasra Farain, Suzanne Fielding, Matthias Fuchs, Jasper van der Gucht, Silke Henkes, Maziyar Jalaal, Yogesh M. Joshi, Anaël Lemaître, Robert L. Leheny, Sébastien Manneville, Kirsten Martens , et al. (15 additional authors not shown)

Abstract: Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a worksh… ▽ More Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 21 pages, 7 figures, perspective on the workshop 'Yield stress and fluidization in brittle and ductile amorphous systems' held from January 9 to 13, 2023 at the Lorentz Center in Leiden

Acid-induced gelation of carboxymethylcellulose solutions

Authors: Gauthier Legrand, Guilhem P. Baeza, Matteo Peyla, Lionel Porcar, Carlos Fernández-de-Alba, Sébastien Manneville, Thibaut Divoux

Abstract: The present work offers a comprehensive description of the acid-induced gelation of carboxymethylcellulose (CMC), a water-soluble derivative of cellulose broadly used in numerous applications ranging from food packaging to biomedical engineering. Linear viscoelastic properties measured at various pH and CMC contents allow us to build a sol-gel phase diagram, and show that CMC gels exhibit broad po… ▽ More The present work offers a comprehensive description of the acid-induced gelation of carboxymethylcellulose (CMC), a water-soluble derivative of cellulose broadly used in numerous applications ranging from food packaging to biomedical engineering. Linear viscoelastic properties measured at various pH and CMC contents allow us to build a sol-gel phase diagram, and show that CMC gels exhibit broad power-law viscoelastic spectra that can be rescaled onto a master curve following a time-composition superposition principle. These results demonstrate the microstructural self-similarity of CMC gels, and inspire a mean-field model based on hydrophobic inter-chain association that accounts for the sol-gel boundary over the entire range of CMC content under study. Neutron scattering experiments further confirm this picture and suggest that CMC gels comprise a fibrous network crosslinked by aggregates. Finally, low-field NMR measurements offer an original signature of acid-induced gelation from the solvent perspective. Altogether, these results open avenues for precise manipulation and control of CMC-based hydrogels. △ Less

Submitted 24 January, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Comments: 7 pages, 4 figures and 4 figures as SI

Critical-like gelation dynamics in cellulose nanocrystal suspensions

Authors: Lise Morlet-Decarnin, Thibaut Divoux, Sebastien Manneville

Abstract: We use time-resolved mechanical spectroscopy to offer a detailed picture of the gelation dynamics of cellulose nanocrystal (CNC) suspensions following shear cessation in the presence of salt. CNCs are charged, rodlike colloids that self-assemble into various phases, including physical gels serving as soft precursors for biosourced composites. Here, a series of linear viscoelastic spectra acquired… ▽ More We use time-resolved mechanical spectroscopy to offer a detailed picture of the gelation dynamics of cellulose nanocrystal (CNC) suspensions following shear cessation in the presence of salt. CNCs are charged, rodlike colloids that self-assemble into various phases, including physical gels serving as soft precursors for biosourced composites. Here, a series of linear viscoelastic spectra acquired across the sol-gel transition of CNC suspensions are rescaled onto two master curves, that correspond to a viscoelastic liquid state prior to gelation and to a soft solid state after gelation. These two states are separated by a critical gel point, where all rescaling parameters diverge in an asymmetric fashion, yet with exponents that obey hyperscaling relations consistent with previous works on isotropic colloids and polymer gels. Upon varying the salt content, we further show that these critical-like dynamics result in both time-connectivity and time-concentration superposition principles. △ Less

Submitted 19 February, 2024; v1 submitted 10 September, 2023; originally announced September 2023.

Comments: 8 pages, 3 figures, supplementary information (2 pages, 2 figures, 2 tables)

Journal ref: ACS Macro Letters 12, 1733-1738 (2023)

Shear-induced reinforcement in boehmite gels: a rheo-X-ray-scattering study

Authors: Iana Sudreau, Marion Servel, Eric Freyssingeas, François Liénard, Szilvia Karpati, Stéphane Parola, Xavier Jaurand, Pierre-Yves Dugas, Lauren Matthews, Thomas Gibaud, Thibaut Divoux, Sébastien Manneville

Abstract: Boehmite, an aluminum oxide hydroxide $γ$-AlO(OH), is broadly used in the form of particulate dispersions in industrial applications, e.g., for the fabrication of ceramics and catalyst supports or as a binder for extrusion processes. Under acidic conditions, colloidal boehmite dispersions at rest form gels, i.e., space-spanning percolated networks that behave as soft solids at rest, and yet yield… ▽ More Boehmite, an aluminum oxide hydroxide $γ$-AlO(OH), is broadly used in the form of particulate dispersions in industrial applications, e.g., for the fabrication of ceramics and catalyst supports or as a binder for extrusion processes. Under acidic conditions, colloidal boehmite dispersions at rest form gels, i.e., space-spanning percolated networks that behave as soft solids at rest, and yet yield and flow like liquids under large enough deformations. Like many other colloidal gels, the solid-like properties of boehmite gels at rest are very sensitive to their previous mechanical history. Our recent work [Sudreau et al., J. Rheol. 66, 91-104 (2022), and Phys. Rev. Material 6, L042601 (2022)] has revealed such \textit{memory effects}, where the shear experienced prior to flow cessation drives the elasticity of boehmite gels: while gels formed following application of a shear rate $\dotγ_{\rm p}$ larger than a critical value $\dotγ_{\rm c}$ are insensitive to shear history, gels formed after application of $\dotγ_{\rm p}<\dotγ_{\rm c}$ display reinforced viscoelastic properties and non-negligible residual stresses. Here, we provide a microstructural scenario for these striking observations by coupling rheometry and small-angle X-ray scattering. Time-resolved measurements for $\dotγ_{\rm p} <\dotγ_{\rm c}$ show that scattering patterns develop an anisotropic shape that persists upon flow cessation, whereas gels exposed to $\dotγ_{\rm p}>\dotγ_{\rm c}$ display isotropic scattering patterns upon flow cessation. Moreover, as the shear rate applied prior to flow cessation is decreased below $\dotγ_{\rm c}$, the level of anisotropy frozen in the sample microstructure grows similarly to the viscoelastic properties, thus providing a direct link between mechanical reinforcement and flow-induced microstructural anisotropy. △ Less

Submitted 29 March, 2023; originally announced March 2023.

Comments: 13 pages, 10 figures

Journal ref: Physical Review Materials 7, 115603 (2023)

The hidden hierarchical nature of soft particulate gels

Authors: Minaspi Bantawa, Bavand Keshavarz, Michela Geri, Mehdi Bouzid, Thibaut Divoux, Gareth H. McKinley, Emanuela Del Gado

Abstract: Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical… ▽ More Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical response, despite being the minority constituent. The rheological response and gel elasticity are direct functions of the particle volume fraction $φ$: however, the diverse range of different functional dependencies reported experimentally has, to date, challenged efforts to identify general scaling laws. Here we reveal a hidden hierarchical organization of fractal elements that controls the viscoelastic spectrum, and which is associated with the spatial heterogeneity of the solid matrix topology. The fractal elements form the foundations of a viscoelastic master curve, which we construct using large-scale 3D microscopic simulations of model gels, and can be described by a recursive rheological ladder model over a range of particle volume fractions and gelation rates. The hierarchy of the fractal elements provides the missing general framework required to predict the gel elasticity and the viscoelastic response of these ubiquitous complex materials. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Dual origin of viscoelasticity in polymer-carbon black hydrogels: a rheometry and electrical spectroscopy study

Authors: Gauthier Legrand, Sébastien Manneville, Gareth H. McKinley, Thibaut Divoux

Abstract: Nanocomposites formed by mixing nanoparticles and polymers offer a limitless creative space for the design of functional advanced materials with a broad range of applications in materials and biological sciences. Here we focus on aqueous dispersions of hydrophobic colloidal soot particles, namely carbon black (CB) dispersed with a sodium salt of carboxymethylcellulose (CMC), a food additive known… ▽ More Nanocomposites formed by mixing nanoparticles and polymers offer a limitless creative space for the design of functional advanced materials with a broad range of applications in materials and biological sciences. Here we focus on aqueous dispersions of hydrophobic colloidal soot particles, namely carbon black (CB) dispersed with a sodium salt of carboxymethylcellulose (CMC), a food additive known as cellulose gum that bears hydrophobic groups, which are liable to bind physically to CB particles. Varying the relative content of CB nanoparticles and cellulose gum allows us to explore a rich phase diagram that includes a gel phase. We investigate this hydrogel using rheometry and electrochemical impedance spectroscopy. CB-CMC hydrogels display two radically different types of mechanical behaviors that are separated by a critical CMC-to-CB mass ratio $r_c$. For $r<r_c$, i.e., for low CMC concentration, the gel is electrically conductive and shows a glassy-like viscoelastic spectrum, pointing to a microstructure composed of a percolated network of CB nanoparticles decorated by CMC. In contrast, gels with CMC concentration larger than $r_c$ are non-conductive, indicating that the CB nanoparticles are dispersed in the cellulose gum matrix as isolated clusters, and act as physical crosslinkers of the CMC network, hence providing mechanical rigidity to the composite. Moreover, in the concentration range, $r>r_c$ CB-CMC gels display a power-law viscoelastic spectrum that depends strongly on the CMC concentration. These relaxation spectra can be rescaled onto a master curve that exhibits a power-law scaling in the high-frequency limit, with an exponent that follows Zimm theory, showing that CMC plays a key role in the gel viscoelastic properties for $r>r_c$. Our results offer a characterization of CB-CMC dispersions that will be useful for designing nanocomposites based on hydrophobic interactions. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: 18 pages, 10 figures, and 6 supplemental figures

Continuum modeling of Soft Glassy Materials under shear

Authors: Roberto Benzi, Thibaut Divoux, Catherine Barentin, Sébastien Manneville, Mauro Sbragaglia, Federico Toschi

Abstract: Soft Glassy Materials (SGM) consist in dense amorphous assemblies of colloidal particles of multiple shapes, elasticity, and interactions, which confer upon them solid-like properties at rest. They are ubiquitously encountered in modern engineering, including additive manufacturing, semi-solid flow cells, dip-coating, adhesive locomotion, where they are subjected to complex mechanical histories. S… ▽ More Soft Glassy Materials (SGM) consist in dense amorphous assemblies of colloidal particles of multiple shapes, elasticity, and interactions, which confer upon them solid-like properties at rest. They are ubiquitously encountered in modern engineering, including additive manufacturing, semi-solid flow cells, dip-coating, adhesive locomotion, where they are subjected to complex mechanical histories. Such processes often include a solid-to-liquid transition induced by large enough shear, which results in complex transient phenomena such as non-monotonic stress responses, i.e., stress overshoot, and spatially heterogeneous flows, e.g., shear-banding or brittle failure. In the present article, we propose a pedagogical introduction to a continuum model based on a spatially-resolved fluidity approach that we recently introduced to rationalize shear-induced yielding in SGMs. Our model, which relies upon non-local effects, quantitatively captures salient features associated with such complex flows, including the rate dependence of the stress overshoot, as well as transient shear-banded flows together with nontrivial scaling laws for fluidization times. This approach offers a versatile framework to account for subtle effects, such as avalanche-like phenomena, or the impact of boundary conditions, which we illustrate by including in our model the elasto-hydrodynamic slippage of soft particles compressed against solid surfaces. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: 8 pages, 4 figures

Interpenetration of fractal clusters drives elasticity in colloidal gels formed upon flow cessation

Authors: Noémie Dagès, Louis V. Bouthier, Lauren Matthews, Sébastien Manneville, Thibaut Divoux, Arnaud Poulesquen, Thomas Gibaud

Abstract: Colloidal gels are out of equilibrium soft solids composed of attractive Brownian particles that form a space-spanning network at low volume fractions. The elastic properties of these systems result from the network microstructure, which is very sensitive to shear history. Here, we take advantage of such sensitivity to tune the viscoelastic properties of a colloidal gel made of carbon black nanopa… ▽ More Colloidal gels are out of equilibrium soft solids composed of attractive Brownian particles that form a space-spanning network at low volume fractions. The elastic properties of these systems result from the network microstructure, which is very sensitive to shear history. Here, we take advantage of such sensitivity to tune the viscoelastic properties of a colloidal gel made of carbon black nanoparticles. Starting from a fluidized state under an applied shear rate $\dot γ_0$, we use an abrupt flow cessation to trigger a liquid-to-solid transition. We observe that the resulting gel is all the more elastic when the shear rate $\dot γ_0$ is low and that the viscoelastic spectra can be mapped on a master curve. Moreover, coupling rheometry to small angle X-ray scattering allows us to show that the gel microstructure is different from gels solely formed by thermal agitation where only two length scales are observed: the dimension of the colloidal and the dimension the fractal aggregates. Competition between shear and thermal energy leads to gels with three characteristic length scales. Such gels structure in a percolated network of fractal clusters that interpenetrate each other. Experiments on gels prepared with various shear histories reveal that cluster interpenetration increases with decreasing values of the shear rate $\dot γ_0$ applied before flow cessation. These observations strongly suggest that cluster interpenetration drives the gel elasticity, which we confirm using a structural model. Our results, which are in stark contrast with previous literature, where gel elasticity was either linked to cluster connectivity or to bending modes, highlight a novel local parameter controlling the macroscopic viscoelastic properties of colloidal gels. △ Less

Submitted 16 September, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Journal ref: Soft Matter 18, 6645 (2022)

Slow dynamics and time-composition superposition in gels of cellulose nanocrystals

Authors: Lise Morlet-Decarnin, Thibaut Divoux, Sebastien Manneville

Abstract: Cellulose nanocrystals (CNCs) are rodlike biosourced colloidal particles used as key building blocks in a growing number of materials with innovative mechanical or optical properties. While CNCs form stable suspensions at low volume fractions in pure water, they aggregate in the presence of salt and form colloidal gels with time-dependent properties. Here, we study the impact of salt concentration… ▽ More Cellulose nanocrystals (CNCs) are rodlike biosourced colloidal particles used as key building blocks in a growing number of materials with innovative mechanical or optical properties. While CNCs form stable suspensions at low volume fractions in pure water, they aggregate in the presence of salt and form colloidal gels with time-dependent properties. Here, we study the impact of salt concentration on the slow aging dynamics of CNC gels following the cessation of a high-shear flow that fully fluidizes the sample. We show that the higher the salt content, the faster the recovery of elasticity upon flow cessation. Most remarkably, the elastic modulus $G'$ obeys a time-composition superposition principle: the temporal evolution of $G'$ can be rescaled onto a universal sigmoidal master curve spanning 13 orders of magnitude in time for a wide range of salt concentrations. Such a rescaling is obtained through a time-shift factor that follows a steep power-law decay with increasing salt concentration, until it saturates at large salt content. These findings are robust to changes in the type of salt and in the CNC content. We further show that both linear and nonlinear rheological properties of CNC gels of various compositions, including, e.g., the frequency-dependence of viscoelastic spectra and the yield strain, can be rescaled based on the sample age along the general master curve. Our results provide strong evidence for universality in the aging dynamics of CNC gels, and call for microstructural investigations during recovery as well as theoretical modelling of time-composition superposition in rodlike colloids. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Comments: 11 pages, 5 figures and 6 supplemental figures

Journal ref: J. Chem. Phys. 156, 214901 (2022)

Residual stresses and shear-induced overaging in boehmite gels

Authors: Iana Sudreau, Mathilde Auxois, Marion Servel, Éric Lécolier, Sébastien Manneville, Thibaut Divoux

Abstract: Colloidal gels respond like soft solids at rest, whereas they flow like liquids under external shear. Starting from a fluidized state under an applied shear rate $\dotγ_{p}$, abrupt flow cessation triggers a liquid-to-solid transition during which the stress relaxes towards a so-called \textit{residual stress} $σ_{\rm res}$ that tallies a macroscopic signature of previous shear history. Here, we r… ▽ More Colloidal gels respond like soft solids at rest, whereas they flow like liquids under external shear. Starting from a fluidized state under an applied shear rate $\dotγ_{p}$, abrupt flow cessation triggers a liquid-to-solid transition during which the stress relaxes towards a so-called \textit{residual stress} $σ_{\rm res}$ that tallies a macroscopic signature of previous shear history. Here, we report on the liquid-to-solid transition in gels of boehmite, an aluminum oxide, that shows a remarkable non-monotonic stress relaxation towards a residual stress $σ_{\rm res}(\dotγ_{p})$ characterized by a dual behavior relative to a critical value $\dotγ_{c}$ of the shear rate $\dotγ_{p}$. Following shear at $\dotγ_{p}>\dotγ_{c}$, the gel obtained upon flow cessation is insensitive to shear history, and the residual stress is negligible. However, for $\dotγ_{p}<\dotγ_{c}$, the gel encodes some memory of the shear history, and $σ_{\rm res}$ increases for decreasing shear rate, directly contributing to reinforcing the gel viscoelastic properties. Moreover, we show that both $σ_{\rm res}$ and the gel viscoelastic properties increase logarithmically with the strain accumulated during the shear period preceding flow cessation. Such a shear-induced "overaging" phenomenon bears great potential for tuning the rheological properties of colloidal gels. △ Less

Submitted 25 March, 2022; v1 submitted 7 January, 2022; originally announced January 2022.

Comments: 5 pages, 4 figures

Journal ref: Physical Review Materials 6, L042601 (2022)

Interplay between wall slip and shear banding in a thixotropic yield stress fluid

Authors: Michela Geri, Brice Saint-Michel, Thibaut Divoux, Gareth H. McKinley, Sebastien Manneville

Abstract: We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard… ▽ More We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard rheometry, we discover an original shear-banding scenario in the decreasing branch of the flow curve of model paraffin gels, in which the flow profile of the flowing band is set by the applied shear rate $\gd$ instead of $\dot γ_c$. As a consequence, the material slips at the walls with a velocity that shows a non-trivial dependence on the applied shear rate. To capture our observations, we propose a differential version of the so-called lever rule, describing the extent of the flowing band and the evolution of wall slip with shear rate. This phenomenological model holds down to very low shear rates, at which the dimension of the flowing band becomes comparable to the size of the wax particles that constitute the gel microstructure, leading to cooperative effects. Our approach provides a framework where constraints imposed in the classical shear-banding scenario can be relaxed, with wall slip acting as an additional degree of freedom. △ Less

Submitted 19 February, 2024; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: 12 pages, 9 figures

Printable, castable, nanocrystalline cellulose-epoxy composites exhibiting hierarchical nacre-like toughening

Authors: Abhinav Rao, Thibaut Divoux, Crystal Owens, A. John Hart

Abstract: Due to their exceptional mechanical and chemical properties and their natural abundance, cellulose nanocrystals (CNCs) are promising building blocks of sustainable polymer composites. However, the rapid gelation of CNC dispersions has generally limited CNC-based composites to low CNC fractions, in which polymer remains the dominant phase. Here we report on the formulation and processing of crossli… ▽ More Due to their exceptional mechanical and chemical properties and their natural abundance, cellulose nanocrystals (CNCs) are promising building blocks of sustainable polymer composites. However, the rapid gelation of CNC dispersions has generally limited CNC-based composites to low CNC fractions, in which polymer remains the dominant phase. Here we report on the formulation and processing of crosslinked CNC-epoxy composites with a CNC fraction exceeding 50 wt.%. The microstructure comprises sub-micrometer aggregates of CNCs crosslinked to polymer, which are analogous to the lamellar structure of nacre and promotes toughening mechanisms associated with bulk ductile behavior, despite the brittle behavior of the aggregates at the nanoscale. At 63 wt.% CNCs, the composites exhibit a hardness of 0.66 GPa and a fracture toughness of 5.2 MPa.m$^{1/2}$. The hardness of this all-organic material is comparable to aluminum alloys, and the fracture toughness at the centimeter scale is comparable to that of wood cell wall. We show that CNC-epoxy composite objects can be shaped from the gel precursors by direct-write printing and by casting, while the cured composites can be machined into complex 3D shapes. The formulation, processing route, and the insights on toughening mechanisms gained from our multiscale approach can be applied broadly to highly loaded nanocomposites. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Continuum modelling of shear start-up in soft glassy materials

Authors: Roberto Benzi, Thibaut Divoux, Catherine Barentin, Sébastien Manneville, Mauro Sbragaglia, Federico Toschi

Abstract: Yield stress fluids (YSFs) display a dual nature highlighted by the existence of a yield stress such that YSFs are solid below the yield stress, whereas they flow like liquids above it. Under an applied shear rate $\dotγ$, the solid-to-liquid transition is associated with a complex spatiotemporal scenario. Still, the general phenomenology reported in the literature boils down to a simple sequence… ▽ More Yield stress fluids (YSFs) display a dual nature highlighted by the existence of a yield stress such that YSFs are solid below the yield stress, whereas they flow like liquids above it. Under an applied shear rate $\dotγ$, the solid-to-liquid transition is associated with a complex spatiotemporal scenario. Still, the general phenomenology reported in the literature boils down to a simple sequence that can be divided into a short-time response characterized by the so-called "stress overshoot", followed by stress relaxation towards a steady state. Such relaxation can be either long-lasting, which usually involves the growth of a shear band that can be only transient or that may persist at steady-state, or abrupt, in which case the solid-to-liquid transition resembles the failure of a brittle material, involving avalanches. Here we use a continuum model based on a spatially-resolved fluidity approach to rationalize the complete scenario associated with the shear-induced yielding of YSFs. Our model provides a scaling for the coordinates of the stress maximum as a function of $\dotγ$, which shows excellent agreement with experimental and numerical data extracted from the literature. Moreover, our approach shows that such a scaling is intimately linked to the growth dynamics of a fluidized boundary layer in the vicinity of the moving boundary. Yet, such scaling is independent of the fate of that layer, and of the long-term behavior of the YSF. Finally, when including the presence of "long-range" correlations, we show that our model displays a ductile to brittle transition, i.e., the stress overshoot reduces into a sharp stress drop associated with avalanches, which impacts the scaling of the stress maximum with $\dotγ$. Our work offers a unified picture of shear-induced yielding in YSFs, whose complex spatiotemporal dynamics are deeply connected to non-local effects. △ Less

Submitted 1 July, 2021; v1 submitted 31 March, 2021; originally announced March 2021.

Comments: 24 pages, 19 figures

Journal ref: Phys. Rev. E 104, 034612 (2021)

Stress Overshoots in Simple Yield Stress Fluids

Authors: Roberto Benzi, Thibaut Divoux, Catherine Barentin, Sébastien Manneville, Mauro Sbragaglia, Federico Toschi

Abstract: Soft glassy materials such as mayonnaise, wet clays, or dense microgels display under external shear a solid-to-liquid transition. Such a shear-induced transition is often associated with a non-monotonic stress response, in the form of a stress maximum referred to as "stress overshoot". This ubiquitous phenomenon is characterized by the coordinates of the maximum in terms of stress $σ_\text{M}$ an… ▽ More Soft glassy materials such as mayonnaise, wet clays, or dense microgels display under external shear a solid-to-liquid transition. Such a shear-induced transition is often associated with a non-monotonic stress response, in the form of a stress maximum referred to as "stress overshoot". This ubiquitous phenomenon is characterized by the coordinates of the maximum in terms of stress $σ_\text{M}$ and strain $γ_\text{M}$ that both increase as weak power laws of the applied shear rate. Here we rationalize such power-law scalings using a continuum model that predicts two different regimes in the limit of low and high applied shear rates. The corresponding exponents are directly linked to the steady-state rheology and are both associated with the nucleation and growth dynamics of a fluidized region. Our work offers a consistent framework for predicting the transient response of soft glassy materials upon start-up of shear from the local flow behavior to the global rheological observables. △ Less

Submitted 13 September, 2021; v1 submitted 31 March, 2021; originally announced March 2021.

Comments: 5 pages, 4 figures, supplemental materials with 2 figures

Journal ref: Phys. Rev. Lett. 127, 148003 (2021)

Shear-induced memory effects in boehmite gels

Authors: Iana Sudreau, Sébastien Manneville, Marion Servel, Thibaut Divoux

Abstract: Colloidal gels are formed by the aggregation of Brownian particles into clusters that are, in turn, part of a space-spanning percolated network. In practice, the microstructure of colloidal gels, which dictates their mechanical properties, strongly depends on the particle concentration and on the nature of their interactions. Yet another critical control parameter is the shear history experienced… ▽ More Colloidal gels are formed by the aggregation of Brownian particles into clusters that are, in turn, part of a space-spanning percolated network. In practice, the microstructure of colloidal gels, which dictates their mechanical properties, strongly depends on the particle concentration and on the nature of their interactions. Yet another critical control parameter is the shear history experienced by the sample, which controls the size and density of the cluster population, via particle aggregation, cluster breakup, and restructuring. Here we investigate the impact of shear history on acid-induced gels of boehmite, an aluminum oxide. We show that following a primary gelation, these gels display a dual response depending on the shear rate $\dotγ_{\rm p}$ used to rejuvenate their microstructure. We identify a critical shear rate $\dotγ_{\rm c}$, above which boehmite gels display a gel-like viscoelastic spectrum upon flow cessation, similar to that obtained following the primary gelation. However, upon flow cessation after shear rejuvenation below $\dotγ_{\rm c}$, boehmite gels display a glassy-like viscoelastic spectrum together with enhanced elastic properties. Moreover, the nonlinear rheological properties of boehmite gels also differ on both sides of $\dotγ_{\rm c}$: weak gels obtained after rejuvenation at $\dotγ_{\rm p}>\dotγ_{\rm c}$ show a yield strain that is constant, independent of $\dotγ_{\rm p}$, whereas strong gels obtained with $\dotγ_{\rm p}<\dotγ_{\rm c}$ display a yield strain that significantly increases with $\dotγ_{\rm p}$. Our results can be interpreted in light of previous literature on shear-induced anisotropy, while we rationalize the critical shear rate in terms of a dimensionless quantity, the Mason number, comparing the strength of the shear flow to the interparticle bond force. △ Less

Submitted 17 October, 2021; v1 submitted 26 March, 2021; originally announced March 2021.

Comments: 15 pages and 14 figures

Time-resolved rheometry of drying liquids and suspensions

Authors: Pierre Lehéricey, Audrey Delots, Niels Holten-Andersen, Thibaut Divoux

Abstract: From paints to food products, solvent evaporation is ubiquitous and critically impacts product rheological properties. It affects Newtonian fluids by concentrating any non-volatile components and viscoelastic materials, which hardens up. In both of these cases, solvent evaporation leads to a change in the sample volume, which makes any rheological measurements particularly challenging with traditi… ▽ More From paints to food products, solvent evaporation is ubiquitous and critically impacts product rheological properties. It affects Newtonian fluids by concentrating any non-volatile components and viscoelastic materials, which hardens up. In both of these cases, solvent evaporation leads to a change in the sample volume, which makes any rheological measurements particularly challenging with traditional shear geometries. Here we show that the rheological properties of a sample experiencing `slow' evaporation can be monitored in a time-resolved fashion by using a zero normal-force controlled protocol in a parallel-plate geometry. Solvent evaporation from the sample leads to a decrease of the normal force, which is compensated at all times by a decrease of the gap height between the plates. As a result, the sample maintains a constant contact area with the plates despite the significant decrease of its volume. We validate the method under both oscillatory and continuous shear by accurately monitoring the viscosity of water-glycerol mixtures experiencing evaporation and a relative volume decrease as large as 70%. Moreover, we apply this protocol to dehydrating suspensions. Specifically, we monitor a dispersion of charged silica nanoparticles undergoing a glass transition induced by evaporation. While the decrease in gap height provides a direct estimate of the increasing particle volume fraction, oscillatory and continuous shear measurements allow us to monitor the suspension's evolving viscoelastic properties in real-time. Overall, our study shows that a zero normal-force protocol provides a simple approach to bulk and time-resolved rheological characterization for systems experiencing slow volume variations. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Comments: 10 pages, 6+4 figures

Journal ref: Journal of Rheology 65, 427 (2021)

Nonlinear mechanics of colloidal gels: creep, fatigue and shear-induced yielding

Authors: Thomas Gibaud, Thibaut Divoux, Sébastien Manneville

Abstract: Colloidal gels are formed through the aggregation of attractive particles, whose size ranges from 10~nm to a few micrometers, suspended in a liquid. Such gels are ubiquitous in everyday life applications, from food products to paints or construction materials, in particular thanks to their ability to easily "yield", i.e., to turn from a solid to a liquid under the application of a weak external lo… ▽ More Colloidal gels are formed through the aggregation of attractive particles, whose size ranges from 10~nm to a few micrometers, suspended in a liquid. Such gels are ubiquitous in everyday life applications, from food products to paints or construction materials, in particular thanks to their ability to easily "yield", i.e., to turn from a solid to a liquid under the application of a weak external load. Understanding and controlling the mechanical response of colloidal gels is therefore of prime importance. Depending on the details of the system, however, the resulting gel networks present different microstructural organisations that may lead to widely different mechanical responses. This raises important challenges in fully characterizing yielding and in uncovering the mechanisms of nonlinear response in colloidal gels. In this paper, we distinguish between two classes of colloidal gels showing respectively reversible yielding, where the gel network reforms upon load release, and irreversible yielding, where the network is fully destroyed through fractures and phase separation. This broad, empirical distinction is achieved through rheology and local experiments at a mesoscopic scale, intermediate between the network characteristic size and the sample size. We further discuss how the observables derived from creep and fatigue experiments may be modelled to predict yielding and highlight open questions and future research directions in the domain. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Journal ref: Encyclopedia of Complexity and Systems Science (2020)

Creep in reactive colloidal gels: a nanomechanical study of cement hydrates

Authors: Michael Haist, Thibaut Divoux, Konrad J. Krakowiak, Jørgen Skibsted, Roland J. -M. Pellenq, Harald S. Müller, Franz-Josef Ulm

Abstract: From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials and constitutes an even greater challenge in densely packed and chemically reactive granular systems. Both features are prominently present in hydrating cement… ▽ More From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials and constitutes an even greater challenge in densely packed and chemically reactive granular systems. Both features are prominently present in hydrating cement pastes composed of calcium silicate hydrate (C-S-H) nanoparticles, whose packing density increases as a function of time, while cement hydration is taking place. Performing nano-indentation tests and porosity measurements on a large collection of samples at various stages of hydration, we show that the creep response of hydrating cement paste is mainly controlled by the inter-particle distance and results from slippage between (C-S-H) nanoparticles. Our findings provide a unique insight into the microscopic mechanism underpinning the creep response in aging granular materials, thus paving the way for the design of concrete with improved creep resistance. △ Less

Submitted 17 October, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 14 pages, 8 figures

Chemo-mechanical characterization of hydrated Calcium-Hydrosilicates with coupled Raman and nanoindentation measurements

Authors: P. Stemmermann, K. Garbev, B. Gasharova, G. Beuchle, M. Haist, T. Divoux

Abstract: Celitement is a new type of cement that is based on hydraulic calcium-hydrosilicate (hCHS) that possesses a potential for minimizing the ratio C/S from above 3 in OPC down to 1, which significantly reduces the amount of CO$_2$ released during processing. The reaction kinetics of hCHS differs from that of classical clinker phases due to the presence of highly reactive silicate species, which involv… ▽ More Celitement is a new type of cement that is based on hydraulic calcium-hydrosilicate (hCHS) that possesses a potential for minimizing the ratio C/S from above 3 in OPC down to 1, which significantly reduces the amount of CO$_2$ released during processing. The reaction kinetics of hCHS differs from that of classical clinker phases due to the presence of highly reactive silicate species, which involve silanol groups instead of pure calcium silicates and aluminates and aluminoferrites. In contrast to Portland cement, no calcium hydroxide is formed during hydration, which otherwise regulates the Ca concentration. Without the buffering role of Ca(OH)$_2$ the concentration of the dissolved species c(Ca$^{2+}$) and c(SiO$_4^{4-}$) and the corresponding pH must be controlled to ensure a reproducible reaction. Pure hCHS reacts isochemically with water, resulting in a C-S-H phase with the same chemical composition as a single hydration product, with a homogeneous distribution of the main elements Ca and Si throughout the sample. Here we study via nanoindentation the mechanical properties of two different types of hardened pastes made out of Celitement (C/S=1.28), with varying amounts of hCHS and variable water to cement ratio. We couple nanoindentation grids with Raman map**s to link the nanoscale mechanical properties to individual microstructural components, yielding in-depth insight into the mechanics of the mineralogical phases constituting the hardened cement paste. We show that we can identify in hardened Celitement paste both fresh C-S-H with varying density, and C-S-H from the raw material using their specific Raman spectra, while simultaneously measuring their mechanical properties. Albeit not suitable for phase identification, EDX measurements provide valuable information about the distribution of alkalis, thus further hel** to understand the reaction pattern of hCHS. △ Less

Submitted 10 March, 2020; originally announced March 2020.

Comments: 32 pages, 8 figures

Journal ref: Applied Geochemistry Volume 118, July 2020, 104582

Criterion for fingering instabilities in colloidal gels

Authors: Thibaut Divoux, Asheesh Shukla, Badis Marsit, Yacouba Kaloga, Irmgard Bischofberger

Abstract: We sandwich a colloidal gel between two parallel plates and induce a radial flow by lifting the upper plate at a constant velocity. Two distinct scenarios result from such a tensile test: ($i$) stable flows during which the gel undergoes a tensile deformation without yielding, and ($ii$) unstable flows characterized by the radial growth of air fingers into the gel. We show that the unstable regime… ▽ More We sandwich a colloidal gel between two parallel plates and induce a radial flow by lifting the upper plate at a constant velocity. Two distinct scenarios result from such a tensile test: ($i$) stable flows during which the gel undergoes a tensile deformation without yielding, and ($ii$) unstable flows characterized by the radial growth of air fingers into the gel. We show that the unstable regime occurs beyond a critical energy input, independent of the gel's macroscopic yield stress. This implies a local fluidization of the gel at the tip of the growing fingers and results in the most unstable wavelength of the patterns exhibiting the characteristic scalings of the classical viscous fingering instability. Our work provides a quantitative criterion for the onset of fingering in colloidal gels based on a local shear-induced yielding, in agreement with the delayed failure framework. △ Less

Submitted 23 April, 2020; v1 submitted 16 February, 2020; originally announced February 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 124, 248006 (2020)

Tuning the shear-thickening of suspensions through surface roughness and physico-chemical interactions

Authors: Philippe Bourrianne, Vincent Niggel, Gatien Polly, Thibaut Divoux, Gareth H. McKinley

Abstract: Shear thickening denotes the reversible increase in viscosity of a suspension of rigid particles under external shear. This ubiquitous phenomenon has been documented in a broad variety of multiphase particulate systems, while its microscopic origin has been successively attributed to hydrodynamic interactions and frictional contact between particles. The relative contribution of these two phenomen… ▽ More Shear thickening denotes the reversible increase in viscosity of a suspension of rigid particles under external shear. This ubiquitous phenomenon has been documented in a broad variety of multiphase particulate systems, while its microscopic origin has been successively attributed to hydrodynamic interactions and frictional contact between particles. The relative contribution of these two phenomena to the magnitude of shear thickening is still highly debated and we report here a discriminating experimental study using a model shear-thickening suspension that allows us to tune independently both the surface chemistry and the surface roughness of the particles. We show here that both properties matter when it comes to continuous shear thickening (CST) and that the presence of hydrogen bonds between the particles is essential to achieve discontinuous shear thickening (DST) by enhancing solid friction between closely contacting particles. Moreover, a simple argument allows us to predict the onset of CST, which for these very rough particles occurs at a critical volume fraction much lower than that previously reported in the literature. Finally, we demonstrate how mixtures of particles with opposing surface chemistry make it possible to finely tune the shear-thickening response of the suspension at a fixed volume fraction, paving the way for a fine control of the shear-thickening transition in engineering applications. △ Less

Submitted 16 June, 2022; v1 submitted 7 January, 2020; originally announced January 2020.

Comments: 16 pages, 16 figures

Unified theoretical and experimental view on transient shear banding

Authors: Roberto Benzi, Thibaut Divoux, Catherine Barentin, Sébastien Manneville, Mauro Sbragaglia, Federico Toschi

Abstract: Dense emulsions, colloidal gels, microgels, and foams all display a solid-like behavior at rest characterized by a yield stress, above which the material flows like a liquid. Such a fluidization transition often consists of long-lasting transient flows that involve shear-banded velocity profiles. The characteristic time for full fluidization, $τ_\text{f}$, has been reported to decay as a power-law… ▽ More Dense emulsions, colloidal gels, microgels, and foams all display a solid-like behavior at rest characterized by a yield stress, above which the material flows like a liquid. Such a fluidization transition often consists of long-lasting transient flows that involve shear-banded velocity profiles. The characteristic time for full fluidization, $τ_\text{f}$, has been reported to decay as a power-law of the shear rate $\dot γ$ and of the shear stress $σ$ with respective exponents $α$ and $β$. Strikingly, the ratio of these exponents was empirically observed to coincide with the exponent of the Herschel-Bulkley law that describes the steady-state flow behavior of these complex fluids. Here we introduce a continuum model, based on the minimization of a "free energy", that captures quantitatively all the salient features associated with such \textit{transient} shear-banding. More generally, our results provide a unified theoretical framework for describing the yielding transition and the steady-state flow properties of yield stress fluids. △ Less

Submitted 2 October, 2019; v1 submitted 20 July, 2019; originally announced July 2019.

Comments: 5 pages, 4 figures - supplemental 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 248001 (2019)

Shear Melting and Recovery of Crosslinkable Cellulose Nanocrystal-Polymer Gels

Authors: Abhinav Rao, Thibaut Divoux, Gareth H. McKinley, A. John Hart

Abstract: Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and… ▽ More Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and curing agents. However, most studies so far have focused on aqueous CNC gels, yet the behavior of CNC-polymer gels in organic solvents is important to their wider processability. Here, we study the rheological behavior of composite polymer-CNC gels in dimethylformamide, which include additives for both UV and thermal crosslinking. Using rheometry coupled with in-situ infrared spectroscopy, we show that under external shear, CNC-polymer gels display progressive and irreversible failure of the hydrogen bond network that is responsible for their pronounced elastic properties. In the absence of cross-linking additives, the polymer-CNC gels show negligible recovery upon cessation of flow, while the presence of additives allows the gels to recover via van der Waals interactions. By exploring a broad range of shear history and CNC concentrations, we construct master curves for the temporal evolution of the viscoelastic properties of the polymer-CNC gels, illustrating universality of the observed dynamics with respect to gel composition and flow conditions. We therefore find that polymer-CNC composite gels display a number of the distinctive features of colloidal glasses and, strikingly, that their response to the flow conditions encountered during processing can be tuned by chemical additives. These findings have implications for processing of dense CNC-polymer composites in solvent casting, 3D printing, and other manufacturing techniques. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: 12 pages, 10 figures, Supplemental: 6 pages, 8 figures

Computing the linear viscoelastic properties of soft gels using an Optimally Windowed Chirp protocol

Authors: Mehdi Bouzid, Bavand Keshavarz, Michela Geri, Thibaut Divoux, Emanuela Del Gado, Gareth H. McKinley

Abstract: We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyze… ▽ More We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous dam** and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By develo** a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path towards novel multiscale insight into the rheological response for such complex materials. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Time-Resolved Mechanical Spectroscopy of Soft Materials via Optimally Windowed Chirps

Authors: Michela Geri, Bavand Keshavarz, Thibaut Divoux, Christian Clasen, Dan J. Curtis, Gareth H. McKinley

Abstract: The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due t… ▽ More The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due to the use of elementary input signals that have not been designed for fast time-evolving systems such as materials undergoing gelation, curing or self-healing. In this work, we develop an optimized and robust excitation signal for time-resolved mechanical spectroscopy through the introduction of joint frequency- and amplitude-modulated exponential chirps. Inspired by the biosonar signals of bats and dolphins, we optimize the signal profile to maximize the signal-to-noise ratio while minimizing spectral leakage with a carefully-designed modulation of the envelope of the chirp. A combined experimental and numerical investigation reveals that there exists an optimal range of window profiles that minimizes the error with respect to standard single frequency sweep methods. The minimum error is set by the noise floor of the instrument, suggesting that the accuracy of an optimally windowed chirp signal is directly comparable to that achievable with a standard frequency sweep, while the acquisition time can be reduced by up to two orders of magnitude, for comparable spectral content. Finally, we demonstrate the ability of this optimized signal to provide time- and frequency-resolved rheometric data by studying the fast gelation process of an acid-induced protein gel. The use of optimally windowed chirps enables a robust rheological characterization of a wide range of soft materials undergoing rapid mutation and has the potential to become an invaluable tool for researchers across different disciplines. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. X 8, 041042 (2018)

Understanding rheological hysteresis in soft glassy materials

Authors: Rangarajan Radhakrishnan, Thibaut Divoux, Sébastien Manneville, Suzanne M. Fielding

Abstract: Motivated by recent experimental studies of rheological hysteresis in soft glassy materials, we study numerically strain rate sweeps in simple yield stress fluids and viscosity bifurcating yield stress fluids. Our simulations of downward followed by upward strain rate sweeps, performed within fluidity models and the soft glassy rheology model, successfully capture the experimentally observed monot… ▽ More Motivated by recent experimental studies of rheological hysteresis in soft glassy materials, we study numerically strain rate sweeps in simple yield stress fluids and viscosity bifurcating yield stress fluids. Our simulations of downward followed by upward strain rate sweeps, performed within fluidity models and the soft glassy rheology model, successfully capture the experimentally observed monotonic decrease of the area of the rheological hysteresis loop with sweep time in simple yield stress fluids, and the bell shaped dependence of hysteresis loop area on sweep time in viscosity bifurcating fluids. We provide arguments explaining these two different functional forms in terms of differing tendencies of simple and viscosity bifurcating fluids to form shear bands during the sweeps, and show that the banding behaviour captured by our simulations indeed agrees with that reported experimentally. We also discuss the difference in hysteresis behaviour between inelastic and viscoelastic fluids. Our simulations qualitatively agree with the experimental data discussed here for four different soft glassy materials. △ Less

Submitted 26 February, 2017; v1 submitted 9 November, 2016; originally announced November 2016.

Comments: 20 pages, 13 figures

Drying of agarose gels monitored by in-situ interferometry

Authors: Bosi Mao, Thibaut Divoux, Patrick Snabre

Abstract: Hydrogels behave as viscoelastic soft solids and display a porous microstructure filled with water with typical amounts of 90\%~w/w or more. As such, these materials are highly sensitive to water loss through evaporation, which impacts their mechanical properties. Yet, aside from scattered empirical observations, little is known about the gel drying kinetics for which there is a lack of temporally… ▽ More Hydrogels behave as viscoelastic soft solids and display a porous microstructure filled with water with typical amounts of 90\%~w/w or more. As such, these materials are highly sensitive to water loss through evaporation, which impacts their mechanical properties. Yet, aside from scattered empirical observations, little is known about the gel drying kinetics for which there is a lack of temporally and spatially resolved measurements. Here we report a benchmark study of the slow drying of agarose gels cast in cylindrical Petri dishes. The weak adhesion of the gel to the lateral wall of the dish guarantees that the gel diameter remains constant during the drying process and that the gel shrinkage is purely vertical. The thinning rate is monitored by in-situ interferometry using a Michelson interferometer. The displacement of interference fringes are analyzed using an original spatiotemporal filtering method, which allows us to measure local thinning rates of about 10~nm/s with high accuracy. Experiments conducted at different positions along the gel radius show that the gel thins locally with a constant velocity before experiencing a sudden collapse at the end of the drying process. We further use the thinning rate measured at the center of the dish during the early stage of the drying process as a robust observable to quantify the role of additives on the gel drying kinetics and compare gels of different compositions. Our work exemplifies interferometry as a powerful tool to quantify the impact of minute amounts of additives on the drying of biopolymer gels. △ Less

Submitted 29 September, 2016; originally announced September 2016.

Comments: 11 pages, 9+4 figures, under review

Nonlinear viscoelasticity and generalized failure criterion for polymer gels

Authors: Bavand Keshavarz, Thibaut Divoux, Sébastien Manneville, Gareth H. McKinley

Abstract: Polymer gels behave as soft viscoelastic solids and exhibit a generic nonlinear mechanical response characterized by pronounced stiffening prior to irreversible failure, most often through macroscopic fractures. Here, we aim at capturing the latter scenario for a protein gel using a nonlinear integral constitutive equation built upon ($i$) the linear viscoelastic response of the gel, here well des… ▽ More Polymer gels behave as soft viscoelastic solids and exhibit a generic nonlinear mechanical response characterized by pronounced stiffening prior to irreversible failure, most often through macroscopic fractures. Here, we aim at capturing the latter scenario for a protein gel using a nonlinear integral constitutive equation built upon ($i$) the linear viscoelastic response of the gel, here well described by a power-law relaxation modulus, and ($ii$) the nonlinear viscoelastic properties of the gel, encoded into a "dam** function". Such formalism predicts quantitatively the gel mechanical response to a shear start-up experiment, up to the onset of macroscopic failure. Moreover, as the gel failure involves the irreversible growth of macroscopic cracks, we couple the latter stress response with Bailey's durability criterion for brittle solids in order to predict the critical values of the stress $σ_c$ and strain $γ_c$ at the failure point, and how they scale with the applied shear rate. The excellent agreement between theory and experiments suggests that the crack growth in this soft viscoelastic gel is a Markovian process, and that Baileys' criterion extends well beyond hard materials such as metals, glasses, or minerals. △ Less

Submitted 5 January, 2017; v1 submitted 27 July, 2016; originally announced July 2016.

Comments: 6 pages, 4 figures and 1 pages of supplemental materials

Journal ref: ACS macro Letters 6, 663-667 (2017)

Simultaneous rheo-electric measurements of strongly conductive complex fluids

Authors: Ahmed Helal, Thibaut Divoux, Gareth H. McKinley

Abstract: We introduce a novel apparatus designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a non-toxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements as… ▽ More We introduce a novel apparatus designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a non-toxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements as low as 1 Pa. We use the capabilities of this design to perform an extensive set of rheo-electric experiments on gels formulated from attractive carbon black particles, at concentrations ranging from 4 to 15% wt. First, experiments on gels at rest prepared with different shear history show a robust power-law scaling between the elastic modulus $G'_0$ and the conductivity $σ_0$ of the gels, i.e. $G'_0 \sim σ_0^α$, with $α=1.65 \pm 0.04$ independently of the gel concentration. Second, conductivity measurements performed simultaneously with creep experiments reveal for the first time that plastic events take place in the bulk while the shear rate decreases as a weak power law of time in the early stage of the experiment. The subsequent evolution of the conductivity and shear rate allows us to propose a local yielding scenario that is in agreement with previous velocimetry measurements. Finally, we determine the constitutive rheological and electrical behavior of carbon black gels. Corrections first introduced for mechanical measurements are carefully extended to electrical measurements to accurately distinguish between bulk and surface contributions to the conductivity. As an illustrative example, we examine the constitutive rheo-electric properties of five carbon black gels of different grades, and demonstrate the relevance of the novel rheo-electric apparatus as a versatile characterization tool for strongly conductive complex fluids and their applications. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: 15 pages, 10 figures + supplemental material

Journal ref: Phys. Rev. Applied 6, 064004 (2016)

Overcooked agar solutions: impact on the structural and mechanical properties of agar gels

Authors: Bosi Mao, Ahmed Bentaleb, Frédéric Louerat, Thibaut Divoux, Patrick Snabre

Abstract: Thermoreversible hydrogels are commonly prepared by cooling down to ambient temperature, aqueous polymer solutions first brought to a boil. The incubation time of the polymer solution at such a high temperature is traditionally kept to a minimum to minimize its impact on the subsequent gelation. Here we study the effect of a prolonged heating of a 1.5\% w/w agar solution at $T=80^{\circ}$C, well a… ▽ More Thermoreversible hydrogels are commonly prepared by cooling down to ambient temperature, aqueous polymer solutions first brought to a boil. The incubation time of the polymer solution at such a high temperature is traditionally kept to a minimum to minimize its impact on the subsequent gelation. Here we study the effect of a prolonged heating of a 1.5\% w/w agar solution at $T=80^{\circ}$C, well above the gelling temperature. The incubation time $\mathcal{T}$ of the polysaccharide solution is varied from a few hours up to five days. We show that the agar solution ages as the result of both the hydrolysis and the intramolecular oxidation of the polysaccharides. As a consequence, both the viscosity and the pH of the solution decrease continuously during the incubation period. Furthermore, samples withdrew at different incubation times are cooled down to form gels which structure and mechanical properties are systematically determined. Cryo-microscopy and X-ray diffraction experiments reveal that agar gels formed from solutions of increasing incubation times, display a coarser microstructure composed of micron-sized foils which result from the condensation of the polysaccharides and contrast with the fibrous-like microstructure of gels prepared from a fresh agar solution. Along with structural changes, a prolonged incubation time of the polymer solution at $T=80^{\circ}$C leads to weaker agar gels of significantly lower shear elastic modulus. Moreover, extensive macro-indentation experiments coupled to direct visualization show that increasing the incubation time of the agar solution up to a few days decreases the yield strain of the gel, while the rupture scenario turns continuously from brittle to ductile-like. Our study suggests that the incubation time of agar solutions at high temperature could be used to tune the mechanical properties of agar-based gels. △ Less

Submitted 2 March, 2016; originally announced March 2016.

Comments: 15 pages, 15 figures

Wall slip across the jamming transition of soft thermoresponsive particles

Authors: Thibaut Divoux, Véronique Lapeyre, Valérie Ravaine, Sébastien Manneville

Abstract: Flows of suspensions are often affected by wall slip, that is the fluid velocity $v_{f}$ in the vicinity of a boundary differs from the wall velocity $v_{w}$ due to the presence of a lubrication layer. While the slip velocity $v_s=\vert v_{f}-v_{w}\vert$ robustly scales linearly with the stress $σ$ at the wall in dilute suspensions, there is no consensus regarding denser suspensions that are shear… ▽ More Flows of suspensions are often affected by wall slip, that is the fluid velocity $v_{f}$ in the vicinity of a boundary differs from the wall velocity $v_{w}$ due to the presence of a lubrication layer. While the slip velocity $v_s=\vert v_{f}-v_{w}\vert$ robustly scales linearly with the stress $σ$ at the wall in dilute suspensions, there is no consensus regarding denser suspensions that are sheared in the bulk, for which slip velocities have been reported to scale as a $v_s\proptoσ^p$ with exponents $p$ inconsistently ranging between 0 and 2. Here we focus on a suspension of soft thermoresponsive particles and show that $v_s$ actually scales as a power law of the viscous stress $σ-σ_c$, where $σ_c$ denotes the yield stress of the bulk material. By tuning the temperature across the jamming transition, we further demonstrate that this scaling holds true over a large range of packing fractions $φ$ on both sides of the jamming point and that the exponent $p$ increases continuously with $φ$, from $p=1$ in the case of dilute suspensions to $p=2$ for jammed assemblies. These results allow us to successfully revisit inconsistent data from the literature and paves the way for a continuous description of wall slip above and below jamming. △ Less

Submitted 10 November, 2015; v1 submitted 26 August, 2015; originally announced August 2015.

Comments: 6 pages, 4 figures - accepted for publication as a Rapid Communication in Phys. Rev. E

Journal ref: Phys. Rev. E 92, 060301 (2015)

Normal force controlled rheology applied to agar gelation

Authors: Bosi Mao, Thibaut Divoux, Patrick Snabre

Abstract: A wide range of thermoreversible gels are prepared by cooling down to ambient temperature hot aqueous polymer solutions. During the sol-gel transition, such materials may experience a volume contraction which is traditionally overlooked as rheological measurements are usually performed in geometries of constant volume. In this article, we revisit the formation of 1.5\% wt. agar gels through a seri… ▽ More A wide range of thermoreversible gels are prepared by cooling down to ambient temperature hot aqueous polymer solutions. During the sol-gel transition, such materials may experience a volume contraction which is traditionally overlooked as rheological measurements are usually performed in geometries of constant volume. In this article, we revisit the formation of 1.5\% wt. agar gels through a series of benchmark rheological experiments performed with a plate-plate geometry. We demonstrate on that particular gel of polysaccharides that the contraction associated with the sol/gel transition cannot be neglected. Indeed, imposing a constant gap width during the gelation results in the strain hardening of the sample, as evidenced by the large negative normal force that develops. Such hardening leads to the slow drift in time of the gel elastic modulus $G'$ towards ever larger values, and thus to an erroneous estimate of $G'$. As an alternative, we show that imposing a constant normal force equals to zero during the gelation, instead of a constant gap width, suppresses the hardening as the decrease of the gap compensates for the sample contraction. Using normal force controlled rheology, we then investigate the impact of thermal history on 1.5\% wt. agar gels. We show that neither the value of the cooling rate, nor the introduction of a constant temperature stage during the cooling process influence the gel elastic properties. Instead, $G'$ only depends on the terminal temperature reached at the end of the cooling ramp, as confirmed by direct imaging of the gel microstructure by cryoelectron microscopy. The present work offers an extensive review of the technical difficulties associated with the rheology of hydrogels and paves the way for a systematic use of normal force controlled rheology to monitor non-isochoric processes. △ Less

Submitted 29 February, 2016; v1 submitted 7 August, 2015; originally announced August 2015.

Comments: 19 pages, 15 figures - accepted for publication in Journal of Rheology

Avalanche-like fluidization of a non-Brownian particle gel

Authors: Aika Kurokawa, Valérie Vidal, Kei Kurita, Thibaut Divoux, Sébastien Manneville

Abstract: We report on the fluidization dynamics of an attractive gel composed of non-Brownian particles made of fused silica colloids. Extensive rheology coupled to ultrasonic velocimetry allows us to characterize the global stress response together with the local dynamics of the gel during shear startup experiments. In practice, after being rejuvenated by a preshear, the gel is left to age during a time… ▽ More We report on the fluidization dynamics of an attractive gel composed of non-Brownian particles made of fused silica colloids. Extensive rheology coupled to ultrasonic velocimetry allows us to characterize the global stress response together with the local dynamics of the gel during shear startup experiments. In practice, after being rejuvenated by a preshear, the gel is left to age during a time $t_w$ before being submitted to a constant shear rate $\dot γ$. We investigate in detail the effects of both $t_w$ and $\dot γ$ on the fluidization dynamics and build a detailed state diagram of the gel response to shear startup flows. The gel may either display transient shear banding towards complete fluidization, or steady-state shear banding. In the former case, we unravel that the progressive fluidization occurs by successive steps that appear as peaks on the global stress relaxation signal. Flow imaging reveals that the shear band grows up to complete fluidization of the material by sudden avalanche-like events which are distributed heterogeneously along the vorticity direction and correlated to large peaks in the slip velocity at the moving wall. These features are robust over a wide range of values of $t_w$ and $\dot γ$, although the very details of the fluidization scenario vary with $\dot γ$. Finally, the critical shear rate $\dot γ^*$ that separates steady-state shear-banding from steady-state homogeneous flow depends on the width on the shear cell and exhibits a nonlinear dependence with $t_w$. Our work brings about valuable experimental data on transient flows of attractive dispersions, highlighting the subtle interplay between shear, wall slip and aging which modeling constitutes a major challenge that has not been met yet. △ Less

Submitted 17 November, 2015; v1 submitted 22 May, 2015; originally announced May 2015.

Comments: main: 12 pages, 10 figures; supplemental: 3 pages, 5 movies and 6 figures

Journal ref: Soft Matter, 2015, 11, 9026 - 9037

Shear Banding of Complex Fluids

Authors: Thibaut Divoux, Marc A. Fardin, Sébastien Manneville, Sandra Lerouge

Abstract: Even in simple geometries many complex fluids display non-trivial flow fields, with regions where shear is concentrated. The possibility for such shear banding has been known since several decades, but the recent years have seen an upsurge of studies offering an ever more precise understanding of the phenomenon. The development of new techniques to probe the flow on multiple scales and with increa… ▽ More Even in simple geometries many complex fluids display non-trivial flow fields, with regions where shear is concentrated. The possibility for such shear banding has been known since several decades, but the recent years have seen an upsurge of studies offering an ever more precise understanding of the phenomenon. The development of new techniques to probe the flow on multiple scales and with increasing spatial and temporal resolution has opened the possibility for a synthesis of the many phenomena that could only have been thought of separately before. In this review, we bring together recent research on shear banding in polymeric and on soft glassy materials, and highlight their similarities and disparities. △ Less

Submitted 13 March, 2015; originally announced March 2015.

Comments: 16 pages, 6 figures, 152 references. Submitted to Annual Review of Fluid Mechanics

Yield Stress Materials in Soft Condensed Matter

Authors: Daniel Bonn, Morton M. Denn, Ludovic Berthier, Thibaut Divoux, Sébastien Manneville

Abstract: We present a comprehensive review of the physical behavior of yield stress materials in soft condensed matter, which encompass a broad range of materials from colloidal assemblies and gels to emulsions and non-Brownian suspensions. All these disordered materials display a nonlinear flow behavior in response to external mechanical forces, due to the existence of a finite force threshold for flow to… ▽ More We present a comprehensive review of the physical behavior of yield stress materials in soft condensed matter, which encompass a broad range of materials from colloidal assemblies and gels to emulsions and non-Brownian suspensions. All these disordered materials display a nonlinear flow behavior in response to external mechanical forces, due to the existence of a finite force threshold for flow to occur: the yield stress. We discuss both the physical origin and rheological consequences associated with this nonlinear behavior, and give an overview of experimental techniques available to measure the yield stress. We discuss recent progress concerning a microscopic theoretical description of the flow dynamics of yield stress materials, emphasizing in particular the role played by relaxation time scales, the interplay between shear flow and aging behavior, the existence of inhomogeneous shear flows and shear bands, wall slip, and non-local effects in confined geometries. △ Less

Submitted 20 June, 2017; v1 submitted 18 February, 2015; originally announced February 2015.

Comments: Review article: V1: 58 pages, 38 figs, 487 refs. V2: Final version 44 pages, 27 figs, 449 refs. Accepted for publication in Rev. Mod. Phys

Journal ref: Rev. Mod. Phys. 89, 035005 (2017)

Syneresis and delayed detachment in agar plates

Authors: Thibaut Divoux, Bosi Mao, Patrick Snabre

Abstract: Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amount of solvent. These gels undergo spontaneous aging, called syneresis that consists in the shrinkage of the gel matrix and the progressive expulsion of the solvent. As a result, a biogel originally casted in a container often lose contact with the container sidewalls, and the d… ▽ More Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amount of solvent. These gels undergo spontaneous aging, called syneresis that consists in the shrinkage of the gel matrix and the progressive expulsion of the solvent. As a result, a biogel originally casted in a container often lose contact with the container sidewalls, and the detachment time is a priori difficult to anticipate since it may occur over variable time spans (from hours to days). Here we report on the syneresis phenomena in agar plates that consist in Petri dishes filled with a gel mainly composed of agar. Direct observations and speckle pattern correlation analysis allow us to rationalize the delayed detachment of the gel from the sidewall of the Petri dish. The detachment time $t^*$ is surprisingly not controlled by the mass loss as one would intuitively expect. Instead, $t^*$ is strongly correlated to the gel minimum thickness $e_{min}$ measured along the sidewall of the plate, and increases as a robust function of $e_{min}$ independently of the prior mass-loss history. Time-resolved correlation spectroscopy atypically applied to such weakly diffusive media gives access to the local thinning rate of the gel. This technique also allows us to detect the gel micro-displacements that are triggered by the water evaporation prior to the detachment, and even to anticipate the latter from a few hours. Our work provides observables to predict the detachment time of agar gels in dishes, and highlights the relevance of speckle pattern correlation analysis for the quantitative investigation of the syneresis dynamics in biopolymer gels. △ Less

Submitted 20 February, 2015; v1 submitted 30 October, 2014; originally announced October 2014.

Comments: 9 pages, 9 figures. Supplemental materials: 3 pages, 1 movie and 5 figures

Creep and Fracture of a Protein Gel under Stress

Authors: Mathieu Leocmach, Christophe Perge, Thibaut Divoux, Sébastien Manneville

Abstract: Biomaterials such as protein or polysaccharide gels are known to behave qualitatively as soft solids and to rupture under an external load. Combining optical and ultrasonic imaging to shear rheology we show that the failure scenario of a protein gel is reminiscent of brittle solids: after a primary creep regime characterized by a power-law behavior which exponent is fully accounted for by linear v… ▽ More Biomaterials such as protein or polysaccharide gels are known to behave qualitatively as soft solids and to rupture under an external load. Combining optical and ultrasonic imaging to shear rheology we show that the failure scenario of a protein gel is reminiscent of brittle solids: after a primary creep regime characterized by a power-law behavior which exponent is fully accounted for by linear viscoelasticity, fractures nucleate and grow logarithmically perpendicularly to shear, up to the sudden rupture of the gel. A single equation accounting for those two successive processes nicely captures the full rheological response. The failure time follows a decreasing power law with the applied shear stress, similar to the Basquin law of fatigue for solids. These results are in excellent agreement with recent fiber-bundle models that include damage accumulation on elastic fibers and exemplify protein gels as model, brittle-like soft solids. △ Less

Submitted 19 August, 2014; v1 submitted 31 January, 2014; originally announced January 2014.

Comments: 5 pages, 4 figures - Supplemental material: 3 pages, 4 figures available at the following URL: http://www.crpp-bordeaux.cnrs.fr/~divoux/publications/PRL_14_Protein_Gels_SM.pdf

Journal ref: Phys. Rev. Lett. 113, 038303 (2014)

Timescales in creep and yielding of attractive gels

Authors: Vincent Grenard, Thibaut Divoux, Nicolas Taberlet, Sébastien Manneville

Abstract: The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive carbon black particles suspended in a mineral oil is shown to involve a previously unreported shear rate response $\dot γ(t)$ characterized by two well-defined… ▽ More The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive carbon black particles suspended in a mineral oil is shown to involve a previously unreported shear rate response $\dot γ(t)$ characterized by two well-defined and separated timescales $τ_c$ and $τ_f$. First $\dot γ(t)$ decreases as a weak power law strongly reminiscent of the primary creep observed in numerous crystalline and amorphous solids, coined the "Andrade creep." We show that the bulk deformation remains homogeneous at the micron scale, which demonstrates that if plastic events take place or if any shear transformation zone exists, such phenomena occur at a smaller scale. As a key result of this paper, the duration $τ_c$ of this creep regime decreases as a power law of the viscous stress, defined as the difference between the applied stress and the yield stress with an exponent ranging between 2 and 3 depending on the gel concentration. The end of this first regime is marked by a jump of the shear rate by several orders of magnitude, while the gel slowly slides as a solid block experiencing strong wall slip at both walls, despite rough boundary conditions. Finally, a second sudden increase of the shear rate is concomitant to the full fluidization of the material which ends up being homogeneously sheared. The corresponding fluidization time $τ_f$ robustly follows an exponential decay with the applied shear stress as already reported for smooth boundary conditions. Finally, we highlight a few features that are common to attractive colloidal gels and to solid materials by discussing our results in the framework of theoretical approaches of solid rupture (kinetic, fiber bundle, and transient network models). △ Less

Submitted 26 November, 2013; v1 submitted 1 October, 2013; originally announced October 2013.

Comments: Main: 18 pages, 15 figures - Supplemental: 5 pages, 6 figures - Accepted for publication in Soft Matter (Nov. 2013)

Journal ref: Soft Matter 10, 1555-1571 (2014)

Insights on the local dynamics induced by thermal cycling in granular matter

Authors: Baptiste Percier, Thibaut Divoux, Nicolas Taberlet

Abstract: In this letter, we report results on the effect of temperature variations on a granular assembly through Molecular Dynamic simulations of a 2D granular column. Periodic dilation of the grains are shown to perfectly mimic such thermal cycling, and allows to rationalize the link between the compaction process, the local grains dynamics and finite size effects. Here we show that the individual grain… ▽ More In this letter, we report results on the effect of temperature variations on a granular assembly through Molecular Dynamic simulations of a 2D granular column. Periodic dilation of the grains are shown to perfectly mimic such thermal cycling, and allows to rationalize the link between the compaction process, the local grains dynamics and finite size effects. Here we show that the individual grain properties, namely their roughness and elastic modulus define a minimal cycling amplitude of temperature ΔTc below which the dynamics is intermittent and spatially heterogeneous while confined into localized regions recently coined "hot spot" [Amon et al., Phys. Rev. Lett. 108, 135502 (2012)]. Above ΔTc, the whole column flows while the grains dynamics ranges continuously from cage-like at the bottom of the column to purely diffusive at the top. Our results provide a solid framework for the futur use of thermal cycling as an alternate driving method for soft glassy materials. △ Less

Submitted 18 June, 2013; originally announced June 2013.

Comments: 5 pages, 5 figures, submitted

Data traffic load balancing and QoS in IEEE 802.11 network: Experimental study of the signal strength effect

Authors: Adel Soudani, Thierry Divoux, Rached Tourki

Abstract: The performances of multimedia applications built on wireless systems depend on bandwidth availability that might heavily affect the quality of service. The IEEE 802.11 standards do not provide performed mechanism for bandwidth management through data load distribution among different APs of the network. Then, an AP can be heavily overloaded causing throughput degradation. Load Balancing Algorit… ▽ More The performances of multimedia applications built on wireless systems depend on bandwidth availability that might heavily affect the quality of service. The IEEE 802.11 standards do not provide performed mechanism for bandwidth management through data load distribution among different APs of the network. Then, an AP can be heavily overloaded causing throughput degradation. Load Balancing Algorithms (LBAs) was been considered as one of the attractive solution to share the traffic through the available access points bandwidths. However, applying the load balancing algorithm and shifting a mobile connection from an access point to another without considering the received signal strength indicator of the concerned APs might causes worst communication performances. This paper is a contribution to check the performance's limits of the LBA algorithm through experimental evaluation of communication metrics for MPEG-4 video transmission over IEEE 802.11 network. Then, the paper focuses on the proposition of a new LBA algorithm structure with the consideration of the RSS level. △ Less

Submitted 11 December, 2012; originally announced December 2012.

Journal ref: Computers & Electrical Engineering 38, 6 (2012) 1717-1730

Rheological hysteresis in soft glassy materials

Authors: Thibaut Divoux, Vincent Grenard, Sébastien Manneville

Abstract: The nonlinear rheology of a soft glassy material is captured by its constitutive relation, shear stress vs shear rate, which is most generally obtained by swee** up or down the shear rate over a finite temporal window. For a huge amount of complex fluids, the up and down sweeps do not superimpose and define a rheological hysteresis loop. By means of extensive rheometry coupled to time-resolved v… ▽ More The nonlinear rheology of a soft glassy material is captured by its constitutive relation, shear stress vs shear rate, which is most generally obtained by swee** up or down the shear rate over a finite temporal window. For a huge amount of complex fluids, the up and down sweeps do not superimpose and define a rheological hysteresis loop. By means of extensive rheometry coupled to time-resolved velocimetry, we unravel the local scenario involved in rheological hysteresis for various types of well-studied soft materials. We introduce two observables that quantify the hysteresis in macroscopic rheology and local velocimetry respectively, as a function of the sweep rate δt^{-1}. Strikingly, both observables present a robust maximum with δt, which defines a single material-dependent timescale that grows continuously from vanishingly small values in simple yield stress fluids to large values for strongly time-dependent materials. In line with recent theoretical arguments, these experimental results hint at a universal timescale-based framework for soft glassy materials, where inhomogeneous flows characterized by shear bands and/or pluglike flow play a central role. △ Less

Submitted 5 December, 2012; v1 submitted 17 July, 2012; originally announced July 2012.

Comments: 5 pages, 3 figures & supplemental materials: 3 pages, 3 figures

Journal ref: Phys. Rev. Lett. 110, 018304 (2013)

Yielding dynamics of a Herschel-Bulkley fluid: a critical-like fluidization behaviour

Authors: Thibaut Divoux, David Tamarii, Catherine Barentin, Stephen Teitel, Sébastien Manneville

Abstract: The shear-induced fluidization of a carbopol microgel is investigated during long start-up experiments using combined rheology and velocimetry in Couette cells of varying gap widths and boundary conditions. As already described in [Divoux et al., {\it Phys. Rev. Lett.}, 2010, {\bf 104}, 208301], we show that the fluidization process of this simple yield stress fluid involves a transient shear-band… ▽ More The shear-induced fluidization of a carbopol microgel is investigated during long start-up experiments using combined rheology and velocimetry in Couette cells of varying gap widths and boundary conditions. As already described in [Divoux et al., {\it Phys. Rev. Lett.}, 2010, {\bf 104}, 208301], we show that the fluidization process of this simple yield stress fluid involves a transient shear-banding regime whose duration $τ_f$ decreases as a power law of the applied shear rate $\gp$. Here we go one step further by an exhaustive investigation of the influence of the shearing geometry through the gap width $e$ and the boundary conditions. While slip conditions at the walls seem to have a negligible influence on the fluidization time $τ_f$, different fluidization processes are observed depending on $\gp$ and $e$: the shear band remains almost stationary for several hours at low shear rates or small gap widths before strong fluctuations lead to a homogeneous flow, whereas at larger values of $\gp$ or $e$, the transient shear band is seen to invade the whole gap in a much smoother way. Still, the power-law behaviour appears as very robust and hints to critical-like dynamics. To further discuss these results, we propose (i) a qualitative scenario to explain the induction-like period that precedes full fluidization and (ii) an analogy with critical phenomena that naturally leads to the observed power laws if one assumes that the yield point is the critical point of an underlying out-of-equilibrium phase transition. △ Less

Submitted 23 July, 2013; v1 submitted 8 October, 2011; originally announced October 2011.

Comments: 16 pages, 14+2 figures, published in Soft Matter

Journal ref: Soft Matter, 2012,8, 4151-4164

Degassing cascades in a shear-thinning viscoelastic fluid

Authors: Valérie Vidal, François Soubiran, Thibaut Divoux, Jean-Christophe Géminard

Abstract: We report the experimental study of the degassing dynamics through a thin layer of shear-thinning viscoelastic fluid (CTAB/NaSal solution), when a constant air flow is imposed at its bottom. Over a large range of parameters, the air is periodically released through series of successive bubbles, hereafter named {\it cascades}. Each cascade is followed by a continuous degassing, lasting for several… ▽ More We report the experimental study of the degassing dynamics through a thin layer of shear-thinning viscoelastic fluid (CTAB/NaSal solution), when a constant air flow is imposed at its bottom. Over a large range of parameters, the air is periodically released through series of successive bubbles, hereafter named {\it cascades}. Each cascade is followed by a continuous degassing, lasting for several seconds, corresponding to an open channel crossing the fluid layer. The periodicity between two cascades does not depend on the injected flow-rate. Inside one cascade, the properties of the overpressure signal associated with the successive bubbles vary continuously. The pressure threshold above which the fluid starts flowing, fluid deformation and pressure drop due to degassing through the thin fluid layer can be simply described by a Maxwell model. We point out that monitoring the evolution inside the cascades provides a direct access to the characteristic relaxation time associated with the fluid rheology. △ Less

Submitted 28 July, 2011; originally announced July 2011.

Influence of Non-Newtonian rheology on magma degassing

Authors: Thibaut Divoux, Valérie Vidal, Maurizio Ripepe, Jean-Christophe Géminard

Abstract: Many volcanoes exhibit temporal changes in their degassing process, from rapid gas puffing to lava fountaining and long-lasting quiescent passive degassing periods. This range of behaviors has been explained in terms of changes in gas flux and/or magma input rate. We report here a simple laboratory experiment which shows that the non- Newtonian rheology of magma can be responsible, alone, for such… ▽ More Many volcanoes exhibit temporal changes in their degassing process, from rapid gas puffing to lava fountaining and long-lasting quiescent passive degassing periods. This range of behaviors has been explained in terms of changes in gas flux and/or magma input rate. We report here a simple laboratory experiment which shows that the non- Newtonian rheology of magma can be responsible, alone, for such intriguing behavior, even in a stationary gas flux regime. We inject a constant gas flow-rate Q at the bottom of a non-Newtonian fluid column, and demonstrate the existence of a critical flow rate Q* above which the system spontaneously alternates between a bubbling and a channeling regime, where a gas channel crosses the entire fluid column. The threshold Q* depends on the fluid rheological properties which are controlled, in particular, by the gas volume fraction (or void fraction) φ. When φ increases, Q* decreases and the degassing regime changes. Non-Newtonian properties of magma might therefore play a crucial role in volcanic eruption dynamics. △ Less

Submitted 13 July, 2011; originally announced July 2011.

Comments: 5 pages, 4 figures

Journal ref: Geophys. Res. Lett., 38, L12301, 2011

Stress overshoot in a simple yield stress fluid: an extensive study combining rheology and velocimetry

Authors: Thibaut Divoux, Catherine Barentin, Sebastien Manneville

Abstract: We report a large amount of experimental data on the stress overshoot phenomenon which takes place during start-up shear flows in a simple yield stress fluid, namely a carbopol microgel. A combination of classical rheological measurements and ultrasonic velocimetry makes it possible to get physical insights on the transient dynamics of both the stress $σ(t)$ and the velocity field across the gap o… ▽ More We report a large amount of experimental data on the stress overshoot phenomenon which takes place during start-up shear flows in a simple yield stress fluid, namely a carbopol microgel. A combination of classical rheological measurements and ultrasonic velocimetry makes it possible to get physical insights on the transient dynamics of both the stress $σ(t)$ and the velocity field across the gap of a rough cylindrical Couette cell during the start-up of shear under an applied shear rate $\dotγ$. (i) At small strains ($γ<1$), $σ(t)$ increases linearly and the microgel undergoes homogeneous deformation. (ii) At a time $t_m$, the stress reaches a maximum value $σ_m$ which corresponds to the failure of the microgel and to the nucleation of a thin lubrication layer at the moving wall. (iii) The microgel then experiences a strong elastic recoil and enters a regime of total wall slip while the stress slowly decreases. (iv) Total wall slip gives way to a transient shear-banding phenomenon, which occurs on timescales much longer than that of the stress overshoot and has been described elsewhere [Divoux \textit{et al., Phys. Rev. Lett.}, 2010, \textbf{104}, 208301]. This whole sequence is very robust to concentration changes in the explored range ($0.5 \le C \le 3%$ w/w). We further demonstrate that the maximum stress $σ_m$ and the corresponding strain $γ_m=\dotγt_m$ both depend on the applied shear rate $\dot γ$ and on the waiting time $t_w$ between preshear and shear start-up: they remain roughly constant as long as $\dotγ$ is smaller than some critical shear rate $\dotγ_w\sim 1/t_w$ and they increase as weak power laws of $\dot γ$ for $\dotγ> \dotγ_w$ [...]. △ Less

Submitted 29 June, 2011; v1 submitted 22 April, 2011; originally announced April 2011.

Comments: 18 pages, 14 figures, accepted for publication in Soft Matter

Journal ref: Soft Matter, 2011,7, 9335-9349

From transient fluidization processes to Herschel-Bulkley behavior in simple yield stress fluids

Authors: Thibaut Divoux, Catherine Barentin, Sébastien Manneville

Abstract: Stress-induced fluidization of a simple yield stress fluid, namely a carbopol microgel, is addressed through extensive rheological measurements coupled to simultaneous temporally and spatially resolved velocimetry. These combined measurements allow us to rule out any bulk fracture-like scenario during the fluidization process such as that suggested in [Caton {\it et al., Rheol Acta}, 2008, {\bf 47… ▽ More Stress-induced fluidization of a simple yield stress fluid, namely a carbopol microgel, is addressed through extensive rheological measurements coupled to simultaneous temporally and spatially resolved velocimetry. These combined measurements allow us to rule out any bulk fracture-like scenario during the fluidization process such as that suggested in [Caton {\it et al., Rheol Acta}, 2008, {\bf 47}, 601-607]. On the contrary, we observe that the transient regime from solidlike to liquidlike behaviour under a constant shear stress $σ$ successively involves creep deformation, total wall slip, and shear banding before a homogeneous steady state is reached. Interestingly, the total duration $τ_f$ of this fluidization process scales as $τ_f \propto 1/(σ- σ_c)^β$, where $σ_c$ stands for the yield stress of the microgel, and $β$ is an exponent which only depends on the microgel properties and not on the gap width or on the boundary conditions. Together with recent experiments under imposed shear rate [Divoux {\it et al., Phys. Rev. Lett.}, 2010, {\bf 104}, 208301], this scaling law suggests a route to rationalize the phenomenological Herschel-Bulkley (HB) power-law classically used to describe the steady-state rheology of simple yield stress fluids. In particular, we show that the {\it steady-state} HB exponent appears as the ratio of the two fluidization exponents extracted separately from the {\it transient} fluidization processes respectively under controlled shear rate and under controlled shear stress. △ Less

Submitted 29 June, 2011; v1 submitted 3 December, 2010; originally announced December 2010.

Comments: 12 pages, 9 figures, accepted for publication in Soft Matter

Journal ref: Soft Matter, 2011,7, 8409-8418