-
The TEMPO Survey II: Science Cases Leveraged from a Proposed 30-Day Time Domain Survey of the Orion Nebula with the Nancy Grace Roman Space Telescope
Authors:
Melinda Soares-Furtado,
Mary Anne Limbach,
Andrew Vanderburg,
John Bally,
Juliette Becker,
Anna L. Rosen,
Luke G. Bouma,
Johanna M. Vos,
Steve B. Howell,
Thomas G. Beatty,
William M. J. Best,
Anne Marie Cody,
Adam Distler,
Elena D'Onghia,
René Heller,
Brandon S. Hensley,
Natalie R. Hinkel,
Brian Jackson,
Marina Kounkel,
Adam Kraus,
Andrew W. Mann,
Nicholas T. Marston,
Massimo Robberto,
Joseph E. Rodriguez,
Jason H. Steffen
, et al. (4 additional authors not shown)
Abstract:
The TEMPO (Transiting Exosatellites, Moons, and Planets in Orion) Survey is a proposed 30-day observational campaign using the Nancy Grace Roman Space Telescope. By providing deep, high-resolution, short-cadence infrared photometry of a dynamic star-forming region, TEMPO will investigate the demographics of exosatellites orbiting free-floating planets and brown dwarfs -- a largely unexplored disco…
▽ More
The TEMPO (Transiting Exosatellites, Moons, and Planets in Orion) Survey is a proposed 30-day observational campaign using the Nancy Grace Roman Space Telescope. By providing deep, high-resolution, short-cadence infrared photometry of a dynamic star-forming region, TEMPO will investigate the demographics of exosatellites orbiting free-floating planets and brown dwarfs -- a largely unexplored discovery space. Here, we present the simulated detection yields of three populations: extrasolar moon analogs orbiting free-floating planets, exosatellites orbiting brown dwarfs, and exoplanets orbiting young stars. Additionally, we outline a comprehensive range of anticipated scientific outcomes accompanying such a survey. These science drivers include: obtaining observational constraints to test prevailing theories of moon, planet, and star formation; directly detecting widely separated exoplanets orbiting young stars; investigating the variability of young stars and brown dwarfs; constraining the low-mass end of the stellar initial mass function; constructing the distribution of dust in the Orion Nebula and map** evolution in the near-infrared extinction law; map** emission features that trace the shocked gas in the region; constructing a dynamical map of Orion members using proper motions; and searching for extragalactic sources and transients via deep extragalactic observations reaching a limiting magnitude of $m_{AB}=29.7$\,mag (F146 filter).
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
All Inkjet-printed Organic Solar Cells on 3D Objects
Authors:
Marc Steinberger,
Andreas Distler,
Johannes Hörber,
Kai Cheong Tam,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Drop-on-demand inkjet printing is a promising and commercially relevant technology for producing organic electronic devices of arbitrary shape on a wide variety of different substrates. In this work we transfer the inkjet printing process of organic photovoltaic devices from 2D to 3D substrates, using a 5-axis robot system equipped with a multi nozzle inkjet printing unit. We present a ready-to-us…
▽ More
Drop-on-demand inkjet printing is a promising and commercially relevant technology for producing organic electronic devices of arbitrary shape on a wide variety of different substrates. In this work we transfer the inkjet printing process of organic photovoltaic devices from 2D to 3D substrates, using a 5-axis robot system equipped with a multi nozzle inkjet printing unit. We present a ready-to-use 3D printing system for industrial application, using a 5-axis motion system controlled by commercial 3D motion software, combined with a commonly used multi-nozzle inkjet print head controlled by the corresponding printing software. The very first time inkjet-printed solar cells on glass/ITO with power conversion efficiencies (PCE) of up to 7% are realized on a 3D object with surfaces tilted by angles of up to 60° against the horizontal direction. Undesired ink flow during deposition of the inkjet-printed layers was avoided by proper ink formulation. In order to be able to print organic (opto-)electronic devices also on substrates without sputtered indium tin oxide bottom electrode, the bottom electrode was inkjet-printed from silver nanoparticle (AgNP) ink, resulting in the first all inkjet-printed (i.e., including bottom electrode) solar cell on a 3D object ever with a record PCE of 2.5%. This work paves the way for functionalizing even complex objects, such as cars, mobile phones, or Internet of Things (IoT) applications with inkjet-printed (opto-)electronic devices.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
On the theoretical framework for meniscus-guided manufacturing of large-area OPV modules
Authors:
Fabian Gumpert,
Annika Janßen,
Robin Basu,
Christoph J. Brabec,
Hans-Joachim Egelhaaf,
Jan Lohbreier,
Andreas Distler
Abstract:
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expres…
▽ More
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expression to describe the layer thickness of coatings manufactured with a trapezoidal-shaped applicator as a function of various fluid and process parameters. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The good agreement of all three approaches demonstrates the potential of the analytical and simulative methods to reduce time- and resource-consuming experiments to a minimum. Furthermore, our theoretical model can be used to enhance the homogeneity of large-area coatings by means of an acceleration profile of the applicator that can compensate the liquid loss during the coating process. The respective analytical expression is validated by simulated and experimentally obtained data for long-distance coatings. Finally, this approach is used to fabricate a large-area OPV module with new world record efficiency.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Matching the photocurrent of perovskite/organic tandem solar modules by varying the cell width
Authors:
Jose Garcia Cerrillo,
Andreas Distler,
Fabio Matteocci,
Karen Forberich,
Michael Wagner,
Robin Basu,
Luigi Angelo Castriotta,
Farshad Jafarzadeh,
Francesca Brunetti,
Fu Yang,
Ning Li,
Asiel Neftali Corpus Mendoza,
Aldo Di Carlo,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the c…
▽ More
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the cell width, whose modification can be readily realized by the adjustment of the module layout. Herein we demonstrate this concept at the experimental level for the first time for a 2T-mechanically stacked perovskite (FAPbBr3)/organic (PM6:Y6:PCBM) tandem mini-module, an unprecedented approach for these emergent photovoltaic technologies fabricated in an independent manner. An excellent Isc matching is achieved by tuning the cell widths of the perovskite and organic modules to 7.22 mm (PCEPVKT-mod= 6.69%) and 3.19 mm (PCEOPV-mod= 12.46%), respectively, leading to a champion efficiency of 14.94% for the tandem module interconnected in series with an aperture area of 20.25 cm2. Rather than demonstrating high efficiencies at the level of small lab cells, our successful experimental proof-of-concept at the module level proves to be particularly useful to couple devices with non-complementary semiconductors, either in series or in parallel electrical connection, hence overcoming the limitations imposed by the monolithic structure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Disposable face masks: a direct source for inhalation of microplastics
Authors:
Andres F. Prada,
Avram Distler,
Shyuan Cheng,
John W. Scott,
Leonardo P. Chamorro,
Ganesh Subramanian,
Vishal Verma,
Andrew Turner
Abstract:
Surgical masks have played a crucial role in healthcare facilities to protect against respiratory and infectious diseases, particularly during the COVID-19 pandemic. However, the synthetic fibers, mainly made of polypropylene, used in their production may adversely affect the environment and human health. Recent studies have confirmed the presence of microplastics and fibers in human lungs and hav…
▽ More
Surgical masks have played a crucial role in healthcare facilities to protect against respiratory and infectious diseases, particularly during the COVID-19 pandemic. However, the synthetic fibers, mainly made of polypropylene, used in their production may adversely affect the environment and human health. Recent studies have confirmed the presence of microplastics and fibers in human lungs and have related these synthetic particles with the occurrence of pulmonary ground glass nodules. Using a piston system to simulate human breathing, this study investigates the role of surgical masks as a direct source of inhalation of microplastics. Results reveal the release of particles of sizes ranging from nanometers (300 nm) to millimeters (~2 mm) during normal breathing conditions, raising concerns about the potential health risks. Notably, large visible particles (> 1 mm) were observed to be ejected from masks with limited wear after only a few breathing cycles. Given the widespread use of masks by healthcare workers and the potential future need for mask usage by the general population during seasonal infectious diseases or new pandemics, develo** face masks using safe materials for both users and the environment is imperative.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Cutting 'lab-to fab' short: High Throughput Optimization and Process Assessment in Roll-to-Roll Slot Die Coating of Printed Photovoltaics
Authors:
Michael Wagner,
Andreas Distler,
Vincent M. Le Corre,
Simon Zapf,
Burak Baydar,
Hans-Dieter Schmidt,
Madeleine Heyder,
Karen Forberich,
Larry Lüer,
Christoph J. Brabec,
H. -J. Egelhaaf
Abstract:
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersom…
▽ More
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersome process. Here, we show how we can optimize the performance of organic solar cells and at the same time assess process performance in a 2D combinatorial approach directly on an industrially relevant slot die coating line. This is enabled by a multi-nozzle slot die coating head allowing parameter variations along and across the web. This modification allows us to generate and analyze 3750 devices in a single coating run, varying the active layer donor:acceptor ratio and the thickness of the electron transport layer (ETL). We use Gaussian Process Regression (GPR) to exploit the whole dataset for precise determination of the optimal parameter combination. Performance-relevant features of the active layer morphology are inferred from UV-Vis absorption spectra. By map** morphology in this way, small undesired gradients of process conditions (extrusion rates, annealing temperatures) are detected and their effect on device performance is quantified. The correlation between process parameters, morphology and performance obtained by GPR provides hints to the underlying physics, which are finally quantified by automated high-throughput drift-diffusion simulations. This leads to the conclusion that voltage losses which are observed for very thin ETL coatings are due to incomplete coverage of the electrode by the ETL, which cause enhanced surface recombination.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Group extensions with special properties
Authors:
Andreas Distler,
Bettina Eick
Abstract:
Given a group G and a G-module A, we show how to determine up to isomorphism the extensions E of A by G so that A embeds as smallest non-trivial term of the derived series or of the lower central series into E.
Given a group G and a G-module A, we show how to determine up to isomorphism the extensions E of A by G so that A embeds as smallest non-trivial term of the derived series or of the lower central series into E.
△ Less
Submitted 16 April, 2014;
originally announced April 2014.
-
$\mathcal{J}^{\ast}=\mathcal{D}^{\ast}$ need not hold in finite semigroups
Authors:
Andreas Distler,
Victor Maltcev,
Abdullahi Umar
Abstract:
We provide an example of minimum size of a finite semigroup with $\mathcal{J}^{\ast}\neq\mathcal{D}^{\ast}$. We introduce the notion of starred stability and prove that every starred stable semigroup has $\mathcal{J}^{\ast}=\mathcal{D}^{\ast}$.
We provide an example of minimum size of a finite semigroup with $\mathcal{J}^{\ast}\neq\mathcal{D}^{\ast}$. We introduce the notion of starred stability and prove that every starred stable semigroup has $\mathcal{J}^{\ast}=\mathcal{D}^{\ast}$.
△ Less
Submitted 8 October, 2013; v1 submitted 5 February, 2013;
originally announced February 2013.
-
The semigroups of order 9 and their automorphism groups
Authors:
Andreas Distler,
Tom Kelsey
Abstract:
We report the number of semigroups with 9 elements up to isomorphism or anti-isomorphism to be 52,989,400,714,478 and up to isomorphism to be 105,978,177,936,292. We obtained these results by combining computer search with recently published formulae for the number of nilpotent semigroups of degree 3. We further provide a complete account of the automorphism groups of the semigroups with at most 9…
▽ More
We report the number of semigroups with 9 elements up to isomorphism or anti-isomorphism to be 52,989,400,714,478 and up to isomorphism to be 105,978,177,936,292. We obtained these results by combining computer search with recently published formulae for the number of nilpotent semigroups of degree 3. We further provide a complete account of the automorphism groups of the semigroups with at most 9 elements. We use this information to deduce that there are 148,195,347,518,186 distinct associative binary operations on an 8-element set and 38,447,365,355,811,944,462 on a 9-element set.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Coclass theory for nilpotent semigroups via their associated algebras
Authors:
Andreas Distler,
Bettina Eick
Abstract:
Coclass theory has been a highly successful approach towards the investigation and classification of finite nilpotent groups. Here we suggest a similar approach for finite nilpotent semigroups. This differs from the group theory setting in that we additionally use certain algebras associated to the considered semigroups. We propose a series of conjectures on our suggested approach. If these become…
▽ More
Coclass theory has been a highly successful approach towards the investigation and classification of finite nilpotent groups. Here we suggest a similar approach for finite nilpotent semigroups. This differs from the group theory setting in that we additionally use certain algebras associated to the considered semigroups. We propose a series of conjectures on our suggested approach. If these become theorems, then this would reduce the classification of nilpotent semigroups of a fixed coclass to a finite calculation. Our conjectures are supported by the classification of nilpotent semigroups of coclass 0 and 1. Computational experiments suggest that the conjectures also hold for the nilpotent semigroups of coclass 2 and 3.
△ Less
Submitted 21 August, 2012;
originally announced August 2012.
-
Finite nilpotent semigroups of small coclass
Authors:
Andreas Distler
Abstract:
The parameter coclass has been used successfully in the study of nilpotent algebraic objects of different kinds. In this paper a definition of coclass for nilpotent semigroups is introduced and semigroups of coclass 0, 1, and 2 are classified. Presentations for all such semigroups and formulae for their numbers are obtained. The classification is provided up to isomorphism as well as up to isomorp…
▽ More
The parameter coclass has been used successfully in the study of nilpotent algebraic objects of different kinds. In this paper a definition of coclass for nilpotent semigroups is introduced and semigroups of coclass 0, 1, and 2 are classified. Presentations for all such semigroups and formulae for their numbers are obtained. The classification is provided up to isomorphism as well as up to isomorphism or anti-isomorphism. Commutative and self-dual semigroups are identified within the classification.
△ Less
Submitted 12 May, 2012;
originally announced May 2012.
-
The number of nilpotent semigroups of degree 3
Authors:
Andreas Distler,
James D. Mitchell
Abstract:
A semigroup is \emph{nilpotent} of degree 3 if it has a zero, every product of 3 elements equals the zero, and some product of 2 elements is non-zero. It is part of the folklore of semigroup theory that almost all finite semigroups are nilpotent of degree 3.
We give formulae for the number of nilpotent semigroups of degree 3 with $n\in\N$ elements up to equality, isomorphism, and isomorphism or…
▽ More
A semigroup is \emph{nilpotent} of degree 3 if it has a zero, every product of 3 elements equals the zero, and some product of 2 elements is non-zero. It is part of the folklore of semigroup theory that almost all finite semigroups are nilpotent of degree 3.
We give formulae for the number of nilpotent semigroups of degree 3 with $n\in\N$ elements up to equality, isomorphism, and isomorphism or anti-isomorphism. Likewise, we give formulae for the number of nilpotent commutative semigroups with $n$ elements up to equality and up to isomorphism.
△ Less
Submitted 17 January, 2012;
originally announced January 2012.