-
ASCENT: A Context-Aware Spectrum Coexistence Design and Implementation Toolset for Policymakers in Satellite Bands
Authors:
Ta-seen Reaz Niloy,
Saurav Kumar,
Aniruddha Hore,
Zoheb Hassan,
Carl Dietrich,
Eric W. Burger,
Jeffrey H. Reed,
Vijay K. Shah
Abstract:
This paper introduces ASCENT (context Aware Spectrum Coexistence Design and Implementation) toolset, an advanced context-aware terrestrial satellite spectrum sharing toolset designed for researchers, policymakers, and regulators. It serves two essential purposes (a) evaluating the potential for harmful interference to primary users in satellite bands and (b) facilitating the analysis, design, and…
▽ More
This paper introduces ASCENT (context Aware Spectrum Coexistence Design and Implementation) toolset, an advanced context-aware terrestrial satellite spectrum sharing toolset designed for researchers, policymakers, and regulators. It serves two essential purposes (a) evaluating the potential for harmful interference to primary users in satellite bands and (b) facilitating the analysis, design, and implementation of diverse regulatory policies on spectrum usage and sharing. Notably, ASCENT implements a closed-loop feedback system that allows dynamic adaptation of policies according to a wide range of contextual factors (e.g., weather, buildings, summer/winter foliage, etc.) and feedback on the impact of these policies through realistic simulation. Specifically, ASCENT comprises the following components (i) interference evaluation tool for evaluating interference at the incumbents in a spectrum-sharing environment while taking the underlying contexts, (ii) dynamic spectrum access (DSA) framework for providing context-aware instructions to adapt networking parameters and control secondary terrestrial network's access to the shared spectrum band according to context aware prioritization, (iii) Context broker to acquire essential and relevant contexts from external context information providers; and (iv) DSA Database to store dynamic and static contexts and the regulator's policy information. The closed-loop feedback system of ASCENT is implemented by integrating these components in a modular software architecture. A case study of sharing the lower 12 GHz Ku band (12.2-12.7 GHz) with the 5G terrestrial cellular network is considered, and the usability of ASCENT is demonstrated by dynamically changing exclusion zone's radius in different weather conditions.
△ Less
Submitted 15 February, 2024; v1 submitted 7 February, 2024;
originally announced February 2024.
-
Checkpoint Placement for Systematic Fault-Injection Campaigns
Authors:
Christian Dietrich,
Tim-Marek Thomas,
Matthias Mnich
Abstract:
Shrinking hardware structures and decreasing operating voltages lead to an increasing number of transient hardware faults,which thus become a core problem to consider for safety-critical systems. Here, systematic fault injection (FI), where one program-under-test is systematically stressed with faults, provides an in-depth resilience analysis in the presence of faults. However, FI campaigns requir…
▽ More
Shrinking hardware structures and decreasing operating voltages lead to an increasing number of transient hardware faults,which thus become a core problem to consider for safety-critical systems. Here, systematic fault injection (FI), where one program-under-test is systematically stressed with faults, provides an in-depth resilience analysis in the presence of faults. However, FI campaigns require many independent injection experiments and, combined, long run times, especially if we aim for a high coverage of the fault space. One cost factor is the forwarding phase, which is the time required to bring the system-under test into the fault-free state at injection time. One common technique to speed up the forwarding are checkpoints of the fault-free system state at fixed points in time.
In this paper, we show that the placement of checkpoints has a significant influence on the required forwarding cycles, especially if we place faults non-uniformly on the time axis. For this, we discuss the checkpoint-selection problem in general, formalize it as a maximum-weight reward path problem in graphs, propose an ILP formulation and a dynamic programming algorithm that find the optimal solution, and provide a heuristic checkpoint-selection method based on a genetic algorithm. Applied to the MiBench benchmark suite, our approach consistently reduces the forward-phase cycles by at least 88 percent and up to 99.934 percent when placing 16 checkpoints.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Differential Modulation in Massive MIMO With Low-Resolution ADCs
Authors:
Don-Roberts Emenonye,
Carl Dietrich,
R. Michael Buehrer
Abstract:
In this paper, we present a differential modulation and detection scheme for use in the uplink of a system with a large number of antennas at the base station, each equipped with low-resolution analog-to-digital converters (ADCs). We derive an expression for the maximum likelihood (ML) detector of a differentially encoded phase information symbol received by a base station operating in the low-res…
▽ More
In this paper, we present a differential modulation and detection scheme for use in the uplink of a system with a large number of antennas at the base station, each equipped with low-resolution analog-to-digital converters (ADCs). We derive an expression for the maximum likelihood (ML) detector of a differentially encoded phase information symbol received by a base station operating in the low-resolution ADC regime. We also present an equal performing reduced complexity receiver for detecting the phase information. To increase the supported data rate, we also present a maximum likelihood expression to detect differential amplitude phase shift keying symbols with low-resolution ADCs. We note that the derived detectors are unable to detect the amplitude information. To overcome this limitation, we use the Bussgang Theorem and the Central Limit Theorem (CLT) to develop two detectors capable of detecting the amplitude information. We numerically show that while the first amplitude detector requires multiple quantization bits for acceptable performance, similar performance can be achieved using one-bit ADCs by grou** the receive antennas and employing variable quantization levels (VQL) across distinct antenna groups. We validate the performance of the proposed detectors through simulations and show a comparison with corresponding coherent detectors. Finally, we present a complexity analysis of the proposed low-resolution differential detectors
△ Less
Submitted 2 December, 2021; v1 submitted 9 November, 2021;
originally announced November 2021.
-
Differential Deep Detection in Massive MIMO With One-Bit ADC
Authors:
Don-Roberts Emenonye,
Carl Dietrich,
R. Michael Buehrer
Abstract:
This article presents a differential detection scheme for the uplink of a massive MIMO system that employs one-bit quantizers on each receive antenna. We focus on the detection of differential amplitude and phase shift keying symbols and we use the Bussgang theorem to express the quantized received signal in terms of quantized signals received during previous channel uses. Subsequently, we derive…
▽ More
This article presents a differential detection scheme for the uplink of a massive MIMO system that employs one-bit quantizers on each receive antenna. We focus on the detection of differential amplitude and phase shift keying symbols and we use the Bussgang theorem to express the quantized received signal in terms of quantized signals received during previous channel uses. Subsequently, we derive the maximum likelihood detector for the differentially encoded amplitude and phase information symbols. We note that while the one-bit detector can decode the differentially encoded phase information symbols, it fails to decode the differentially encoded amplitude information. To decode the amplitude information, we present a one-bit variable quantization level (VQL) system and train a deep neural network to perform two-symbol differential amplitude detection. Through Monte-Carlo simulations, we empirically validate the performance of the proposed amplitude and phase detectors. The presented numerical results show that the spectral efficiency attained in one-bit differential systems is better than the spectral efficiency attained in one-bit coherent systems
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Adaptive Semi-Persistent Scheduling for Enhanced On-road Safety in Decentralized V2X Networks
Authors:
Avik Dayal,
Vijay K. Shah,
Biplav Choudhury,
Vuk Marojevic,
Carl Dietrich,
Jeffrey H. Reed
Abstract:
Decentralized vehicle-to-everything (V2X) networks (i.e., Mode-4 C-V2X and Mode 2a NR-V2X), rely on periodic Basic Safety Messages (BSMs) to disseminate time-sensitive information (e.g., vehicle position) and has the potential to improve on-road safety. For BSM scheduling, decentralized V2X networks utilize sensing-based semi-persistent scheduling (SPS), where vehicles sense radio resources and se…
▽ More
Decentralized vehicle-to-everything (V2X) networks (i.e., Mode-4 C-V2X and Mode 2a NR-V2X), rely on periodic Basic Safety Messages (BSMs) to disseminate time-sensitive information (e.g., vehicle position) and has the potential to improve on-road safety. For BSM scheduling, decentralized V2X networks utilize sensing-based semi-persistent scheduling (SPS), where vehicles sense radio resources and select suitable resources for BSM transmissions at prespecified periodic intervals termed as Resource Reservation Interval (RRI). In this paper, we show that such a BSM scheduling (with a fixed RRI) suffers from severe under- and over- utilization of radio resources under varying vehicle traffic scenarios; which severely compromises timely dissemination of BSMs, which in turn leads to increased collision risks. To address this, we extend SPS to accommodate an adaptive RRI, termed as SPS++. Specifically, SPS++ allows each vehicle -- (i) to dynamically adjust RRI based on the channel resource availability (by accounting for various vehicle traffic scenarios), and then, (ii) select suitable transmission opportunities for timely BSM transmissions at the chosen RRI. Our experiments based on Mode-4 C-V2X standard implemented using the ns-3 simulator show that SPS++ outperforms SPS by at least $50\%$ in terms of improved on-road safety performance, in all considered simulation scenarios.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
DSRC-Enabled Train Safety Communication System at Unmanned Crossings
Authors:
Junsung Choi,
Vuk Marojevic,
Carl B. Dietrich,
Seungyoung Ahn
Abstract:
Although wireless technology is available for safety-critical applications, few applications have been used to improve train crossing safety. To prevent potential collisions between trains and vehicles, we present a Dedicated Short-Range Communication (DSRC)-enabled train safety communication system targeting to implement at unmanned crossings. Since our application's purpose is preventing collisi…
▽ More
Although wireless technology is available for safety-critical applications, few applications have been used to improve train crossing safety. To prevent potential collisions between trains and vehicles, we present a Dedicated Short-Range Communication (DSRC)-enabled train safety communication system targeting to implement at unmanned crossings. Since our application's purpose is preventing collisions between trains and vehicles, we present a method to calculate the minimum required warning time for head-to-head collision at the train crossing. Furthermore, we define the best- and worst-case scenarios and provide practical measurements at six operating crossings in the U.S. with numerous system configurations such as modulation scheme, transmission power, antenna type, train speed, and vehicle braking distances. From our measurements, we find that the warning application coverage range is independent of the train speed, that the omnidirectional antenna with high transmission power is the best configuration for our system, and that the latency values are mostly less than 5 ms. We use the radio communication coverage to evaluate the time to avoid collision and introduce the safeness level metric. From the measured data, we observe that the DSRC-enabled train safety communication system is feasible for up to 35 mph train speeds which is providing more than 25-30 s time to avoid the collision for 25-65 mph vehicle speeds. Higher train speeds are expected to be safe, but more measurements beyond the 200 m mark with respect to a crossing considered here are needed for a definite conclusion.
△ Less
Submitted 4 April, 2021;
originally announced April 2021.
-
Survey of Spectrum Regulation for Intelligent Transportation Systems
Authors:
Junsung Choi,
Vuk Marojevic,
Carl B. Dietrich,
Jeffrey H. Reed,
Seungyoung Ahn
Abstract:
As 5G communication technology develops, vehicular communications that require high reliability, low latency, and massive connectivity are drawing increasing interest from those in academia and industry. Due to these develo** technologies, vehicular communication is not limited to vehicle components in the forms of Vehicle-to-Vehicle (V2V) or Vehicle-to-Infrastructure (V2I) networks, but has als…
▽ More
As 5G communication technology develops, vehicular communications that require high reliability, low latency, and massive connectivity are drawing increasing interest from those in academia and industry. Due to these develo** technologies, vehicular communication is not limited to vehicle components in the forms of Vehicle-to-Vehicle (V2V) or Vehicle-to-Infrastructure (V2I) networks, but has also been extended to connect with others, such as pedestrians and cellular users. Dedicated Short-Range Communications (DSRC) is the conventional vehicular communication standard for Intelligent Transportation Systems (ITS). More recently, the 3rd Generation Partnership Project introduced Cellular-Vehicle-to-Everything (C-V2X), a competitor to DSRC. Meanwhile, the Federal Communications Commission (FCC)issued a Notice of Proposed Rulemaking (NPRM) to consider deploying Unlicensed National Information Infrastructure (U-NII)devices in the ITS band with two interference mitigation approaches: Detect-and-Vacate (DAV)and Re-channelization (Re-CH). With multiple standard options and interference mitigation approaches, numerous regulatory taxonomies can be identified and notification of relevant technical challenges issued. However, these challenges are much broader than the current and future regulatory taxonomies pursued by the different countries involved. Because their plans differ, the technical and regulatory challenges vary. This paper presents a literature survey about the technical challenges, the current and future ITS band usage plans, and the major research testbeds for the U.S., Europe, China, Korea, and Japan. This survey shows that the most likely deployment taxonomies are (1) DSRC, C-V2X, and Wi-Fi with Re-CH; (2) DSRC and C-V2X with interoperation, and (3) C-V2X only. The most difficult technical challenge is the interoperability between the Wi-Fi-like DSRC and 4G LTE-like C-V2X.
△ Less
Submitted 3 August, 2020; v1 submitted 26 June, 2020;
originally announced August 2020.
-
A Tracking System For Baseball Game Reconstruction
Authors:
Nina Wiedemann,
Carlos Dietrich,
Claudio T. Silva
Abstract:
The baseball game is often seen as many contests that are performed between individuals. The duel between the pitcher and the batter, for example, is considered the engine that drives the sport. The pitchers use a variety of strategies to gain competitive advantage against the batter, who does his best to figure out the ball trajectory and react in time for a hit. In this work, we propose a system…
▽ More
The baseball game is often seen as many contests that are performed between individuals. The duel between the pitcher and the batter, for example, is considered the engine that drives the sport. The pitchers use a variety of strategies to gain competitive advantage against the batter, who does his best to figure out the ball trajectory and react in time for a hit. In this work, we propose a system that captures the movements of the pitcher, the batter, and the ball in a high level of detail, and discuss several ways how this information may be processed to compute interesting statistics. We demonstrate on a large database of videos that our methods achieve comparable results as previous systems, while operating solely on video material. In addition, state-of-the-art AI techniques are incorporated to augment the amount of information that is made available for players, coaches, teams, and fans.
△ Less
Submitted 8 March, 2020;
originally announced March 2020.
-
Coherence and Interaction in confined room-temperature polariton condensates with Frenkel excitons
Authors:
Simon Betzold,
Marco Dusel,
Oleksandr Kyriienko,
Christof P. Dietrich,
Sebastian Klembt,
Jürgen Ohmer,
Utz Fischer,
Ivan A. Shelykh,
Christian Schneider,
Sven Höfling
Abstract:
The strong light-matter coupling of a microcavity mode to tightly bound Frenkel excitons in organic materials emerged as a versatile, room-temperature compatible platform to study nonlinear many-particle physics and bosonic condensation. However, various aspects of the optical response of Frenkel excitons in this regime remained largely unexplored. Here, we utilize a hemispheric optical cavity fil…
▽ More
The strong light-matter coupling of a microcavity mode to tightly bound Frenkel excitons in organic materials emerged as a versatile, room-temperature compatible platform to study nonlinear many-particle physics and bosonic condensation. However, various aspects of the optical response of Frenkel excitons in this regime remained largely unexplored. Here, we utilize a hemispheric optical cavity filled with the fluorescent protein mCherry to address two important questions in the field of room-temperature polariton condensates. First, combining the high quality factor of the microcavity with a well-defined mode structure allows us to provide a definite answer whether temporal coherence in such systems can become competitive with their low-temperature counterparts. We observe highly monochromatic and coherent light beams emitted from the condensate, characterized by a coherence time greater than 150$\,$ps, which exceeds the polariton lifetime by two orders of magnitude. Second, the high quality of our device allows to sensibly trace the emission energy of the condensate, and thus to establish a fundamental picture which quantitatively explains the core nonlinear processes yielding the characteristic density-dependent blueshift. We find that the energy shift of Frenkel exciton-polaritons is largely dominated by the reduction of the Rabi-splitting due to phase space filling effects, which is influenced by the redistribution of polaritons in the system. While our finding of highly coherent condensation at ambient conditions addresses the suitability of organic polaritonics regarding their utilization as highly coherent room temperature polariton lasers, shedding light on the non-linearity is of great benefit towards implementing non-linear devices, optical switches, and lattices based on exciton-polaritons at room temperature.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Prototypes of Using Directional Antenna for Railroad Crossing Safety Applications
Authors:
Xiaofu Ma,
Sayantan Guha,
Junsung Choi,
Christopher R. Anderson,
Randall Nealy,
Jared Withers,
Jeffrey H. Reed,
Carl Dietrich
Abstract:
In this demonstration proposal, we present a prototype of a rapidly deployable and cost-effective railroad crossing early warning system integrated with the railway system. Specifically, the proposed demonstration deal with the safety applications based on dedicated short range communications (DSRC) protocol and devices using our different antennas. We will demonstrate the feasibility and advantag…
▽ More
In this demonstration proposal, we present a prototype of a rapidly deployable and cost-effective railroad crossing early warning system integrated with the railway system. Specifically, the proposed demonstration deal with the safety applications based on dedicated short range communications (DSRC) protocol and devices using our different antennas. We will demonstrate the feasibility and advantages of our proposed system, including the antenna design, system deployment, the over-the-air transmission, and the software applications that we developed for the end users.
△ Less
Submitted 4 December, 2018;
originally announced January 2019.
-
Analysis of directional antenna for railroad crossing safety applications
Authors:
Xiaofu Ma,
Sayantan Guha,
Junsung Choi,
Christopher R Anderson,
Randall Nealy,
Jared Withers,
Jeffrey H Reed,
Carl Dietrich
Abstract:
A rapidly deployable and cost-effective railroad crossing early warning system integrated with the railway system is attractive due to its protection of the unmanned grade crossings, which requires a warning system with long-distance communication link. In this paper, we investigate the problem of suitable antenna selection for such a railway warning system First, the antenna criteria for railroad…
▽ More
A rapidly deployable and cost-effective railroad crossing early warning system integrated with the railway system is attractive due to its protection of the unmanned grade crossings, which requires a warning system with long-distance communication link. In this paper, we investigate the problem of suitable antenna selection for such a railway warning system First, the antenna criteria for railroad crossing safety applications are described based on practical system considerations, the safe distances on the road and on the railway. Then, the optimal antenna pattern is derived theoretically to get the smallest size which fits for the practical installation. We also conducted a feasibility study of an array antenna through measurements on a near field scanner.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Regulatory Options and Technical Challenges for the 5.9 GHz Spectrum: Survey and Analysis
Authors:
Junsung Choi,
Vuk Marojevic,
Mina Labib,
Siddharth Kabra,
Jayanthi Rao,
Sushanta Das,
Jeffery H. Reed,
Carl B. Dietrich
Abstract:
In 1999, the Federal Communications Commission (FCC) allocated 75 MHz in the 5.9 GHz ITS Band (5850-5925 MHz) for use by Dedicated Short Range Communications (DSRC) to facilitate information transfer between equipped vehicles and roadside systems. This allocation for DSRC in the ITS band has been a co-primary allocation while the band is shared with the Fixed Satellite Service (FSS), fixed microwa…
▽ More
In 1999, the Federal Communications Commission (FCC) allocated 75 MHz in the 5.9 GHz ITS Band (5850-5925 MHz) for use by Dedicated Short Range Communications (DSRC) to facilitate information transfer between equipped vehicles and roadside systems. This allocation for DSRC in the ITS band has been a co-primary allocation while the band is shared with the Fixed Satellite Service (FSS), fixed microwave service, amateur radio services and other Federal users authorized by the National Telecommunications and Information Administration (NTIA). In recent time, Cellular V2X (C-V2X), introduced in 3GPP Release 14 LTE standard, has received significant attention due to its perceived ability to deliver superior performance with respect to vehicular safety applications. There is a strong momentum in the industry for C-V2X to be considered as a viable alternative to DSRC and accordingly, to operate in the ITS spectrum. In another recent notice, the FCC is soliciting input for a proposed rulemaking to open up more bandwidth for unlicensed Wi-Fi devices, mainly based on the 802.11ac standard. The FCC plans to work with the Department of Transportation (DoT), and the automotive and communications industries to evaluate potential sharing techniques in the ITS band between DSRC and Wi-Fi devices. This paper analyzes the expected scenarios that might emerge from FCC and the National Highway Traffic Safety Administration (NHTSA) regulation options and identifies the technical challenge associated with each scenario. We also provide a literature survey and find that many of resulting technical challenges remain open research problems that need to be addressed. We conclude that the most challenging issue is related to the interoperability between DSRC and C-V2X in the 5.9 GHz band and the detection and avoidance of harmful adjacent and co-channel interference.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
5G-CORNET: Platform as a Service
Authors:
Vuk Marojevic,
Shem Kikamaze,
Randall Nealy,
Carl Dietrich
Abstract:
Practical testing of the latest wireless communications standards requires the availability of flexible radio frequency hardware, networking and computing resources. We are providing a Cloud-based infrastructure which offers the necessary resources to carry out tests of the latest 5G standards. The testbed provides a Cloud-based Infrastructure as a Service. The research community can access hardwa…
▽ More
Practical testing of the latest wireless communications standards requires the availability of flexible radio frequency hardware, networking and computing resources. We are providing a Cloud-based infrastructure which offers the necessary resources to carry out tests of the latest 5G standards. The testbed provides a Cloud-based Infrastructure as a Service. The research community can access hardware and software resources through a virtual plat-form that enables isolation and customization of experiments. In other words, researchers have control over the preferred experimental architecture and can run concurrent experiments on the same testbed. This paper introduces the resources that can be used to develop 5G testbeds and experiments.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Performance Analysis of Sensing-Based Semi-Persistent Scheduling in C-V2X Networks
Authors:
Amr Nabil,
Vuk Marojevic,
Komalbir Kaur,
Carl Dietrich
Abstract:
The 3rd Generation Partnership Project released the cellular vehicular-to-everything (C-V2X) specifications as part of the LTE framework in Release 14. C-V2X is the alternative to dedicated short range communications and both are specifically designed for V2X control signaling. C-V2X extends the device-to-device specifications by adding two more modes of operation targeting the vehicular environme…
▽ More
The 3rd Generation Partnership Project released the cellular vehicular-to-everything (C-V2X) specifications as part of the LTE framework in Release 14. C-V2X is the alternative to dedicated short range communications and both are specifically designed for V2X control signaling. C-V2X extends the device-to-device specifications by adding two more modes of operation targeting the vehicular environment in coverage and out of coverage of LTE base stations. Vehicle-to-vehicle communications (V2V) is established with Mode 4, where the devices schedule their transmissions in a distributed way employing sensing-based semi-persistent scheduling (SPS). Research is needed to assess the performance of SPS, especially in congested radio environments. This paper presents the first open-source C-V2X simulator that enables such research. The simulator is implemented in ns-3. We analyze the effect of the Mode 4 resource pool configuration and some of the key SPS parameters on the scheduling performance and find that the resource reservation interval significantly influences packet data rate performance, whereas resource reselection probability has little effect in dense vehicular highway scenarios. Our results show that proper configuration of scheduling parameters can significantly improve performance. We conclude that research on congestion control mechanisms is needed to further enhance the SPS performance for many practical use cases.
△ Less
Submitted 28 April, 2018;
originally announced April 2018.
-
Coexistence of Outdoor Wi-Fi and Radar at 3.5 GHz
Authors:
Seungmo Kim,
Carl Dietrich
Abstract:
Coexistence between radar and outdoor Wireless Fidelity (Wi-Fi) needs thorough study since the IEEE 802.11 Working Group (WG) opposed the latest rules in 3550-3700 MHz (the 3.5 GHz band) that require "exclusion zones." This letter proposes a method that suppresses Wi-Fi-to-radar (WtR) interference, in which a Wi-Fi transmitter (TX) is selected to avoid beam angles toward the victim radar. It is di…
▽ More
Coexistence between radar and outdoor Wireless Fidelity (Wi-Fi) needs thorough study since the IEEE 802.11 Working Group (WG) opposed the latest rules in 3550-3700 MHz (the 3.5 GHz band) that require "exclusion zones." This letter proposes a method that suppresses Wi-Fi-to-radar (WtR) interference, in which a Wi-Fi transmitter (TX) is selected to avoid beam angles toward the victim radar. It is distinguished from prior schemes since it ensures that the Wi-Fi remains operable while suppressing the WtR interference.
△ Less
Submitted 31 May, 2017;
originally announced May 2017.
-
A Geometric Analysis Method for Evaluation of Coexistence between DSRC and Wi-Fi at 5.9 GHz
Authors:
Seungmo Kim,
Carl Dietrich
Abstract:
Co-channel coexistence between Dedicated Short-Range Communications (DSRC) and Wi-Fi needs thorough study. The reason is that although the 5.850-5.925 GHz (5.9 GHz) band has been reserved for DSRC so far, the U.S. government is moving swiftly on opening the band to be shared with Wi-Fi. However, most prior work lacks sufficient scientific rigor by relying on performance metrics such as packet deli…
▽ More
Co-channel coexistence between Dedicated Short-Range Communications (DSRC) and Wi-Fi needs thorough study. The reason is that although the 5.850-5.925 GHz (5.9 GHz) band has been reserved for DSRC so far, the U.S. government is moving swiftly on opening the band to be shared with Wi-Fi. However, most prior work lacks sufficient scientific rigor by relying on performance metrics such as packet delivery rate (PDR) and packet delay that cannot accurately measure performance of a vehicular network that primarily uses broadcast in dissemination of packets. Precise analysis of such broadcast operation is essential for rigorous investigation of DSRC-Wi-Fi coexistence because most safety-critical applications of DSRC operate based on broadcast. This paper proposes a new metric that can more accurately characterize the performance of a broadcast-based DSRC network. The new metric is used to (i) characterize coexistence of DSRC with IEEE 802.11ac-based Wi-Fi and (ii) suggest selection of key medium access control (MAC) parameters for DSRC: inter-broadcast interval (IBI) and contention window (CW).
△ Less
Submitted 31 May, 2017; v1 submitted 24 May, 2017;
originally announced May 2017.
-
Terahertz and higher-order Brunel harmonics: from tunnel to multiphoton ionization regime in tailored fields
Authors:
I. Babushkin,
C. Brée,
C. M. Dietrich,
A. Demircan,
U. Morgner,
A. Husakou
Abstract:
Brunel radiation appears as a result of a two-step process of photo-ionization and subsequent acceleration of electron, without the need of electron recollision. We show that for generation of Brunel harmonics at all frequencies the subcycle ionization dynamics is of critical importance. Namely, such harmonics disappear at low pump intensities when the ionization dynamics depends only on the slow…
▽ More
Brunel radiation appears as a result of a two-step process of photo-ionization and subsequent acceleration of electron, without the need of electron recollision. We show that for generation of Brunel harmonics at all frequencies the subcycle ionization dynamics is of critical importance. Namely, such harmonics disappear at low pump intensities when the ionization dynamics depends only on the slow envelope (so called multiphoton ionization regime) and not on the instantaneous field. Nevertheless, if the pump pulse contains incommensurate frequencies, Brunel mechanism does generate new frequencies even in the multiphoton ionization regime.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
On the Co-existence of TD-LTE and Radar over 3.5 GHz Band: An Experimental Study
Authors:
Jeffrey H. Reed,
Andrew W. Clegg,
Aditya V. Padaki,
Taeyoung Yang,
Randall Nealy,
Carl Dietrich,
Christopher R. Anderson,
D. Michael Mearns
Abstract:
This paper presents a pioneering study based on a series of experiments on the operation of commercial Time-Division Long-Term Evolution (TD-LTE) systems in the presence of pulsed interfering signals in the 3550-3650 MHz band. TD-LTE operations were carried out in channels overlap** and adjacent to the high power SPN-43 radar with various frequency offsets between the two systems to evaluate the…
▽ More
This paper presents a pioneering study based on a series of experiments on the operation of commercial Time-Division Long-Term Evolution (TD-LTE) systems in the presence of pulsed interfering signals in the 3550-3650 MHz band. TD-LTE operations were carried out in channels overlap** and adjacent to the high power SPN-43 radar with various frequency offsets between the two systems to evaluate the susceptibility of LTE to a high power interfering signal. Our results demonstrate that LTE communication using low antenna heights was not adversely affected by the pulsed interfering signal operating on adjacent frequencies irrespective of the distance of interfering transmitter. Performance was degraded only for very close distances (1-2 km) of overlap** frequencies of interfering transmitter.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
Room temperature Tamm-Plasmon Exciton-Polaritons with a WSe2 monolayer
Authors:
Nils Lundt,
Sebastian Klembt,
Evgeniia Cherotchenko,
Oliver Iff,
Anton V. Nalitov,
Martin Klaas,
Simon Betzold,
Christof P. Dietrich,
Alexey V. Kavokin,
Sven Höfling,
Christian Schneider
Abstract:
Solid state cavity quantum electrodynamics is a rapidly advancing field which explores the frontiers of light-matter coupling. Plasmonic approaches are of particular interest in this field, since they carry the potential to squeeze optical modes to spaces significantly below the diffraction limit1,2, enhancing light-matter coupling. They further serve as an architecture to design ultra-fast, non-l…
▽ More
Solid state cavity quantum electrodynamics is a rapidly advancing field which explores the frontiers of light-matter coupling. Plasmonic approaches are of particular interest in this field, since they carry the potential to squeeze optical modes to spaces significantly below the diffraction limit1,2, enhancing light-matter coupling. They further serve as an architecture to design ultra-fast, non-linear integrated circuits with smallest footprints3. Transition metal dichalcogenides are ideally suited as the active material in such circuits as they interact strongly with light at the ultimate monolayer limit4. Here, we implement a Tamm-plasmon-polariton structure, and study the coupling to a monolayer of WSe2, hosting highly stable excitons5. Exciton-Polariton formation at room temperature is manifested in the characteristic energy-momentum dispersion relation studied in photoluminescence, featuring an anti-crossing between the exciton and photon modes with a Rabi-splitting of 23.5 meV. Creating polaritonic quasi-particles in plasmonic architectures with atomic monolayers under ambient conditions is a crucial step towards compact, highly non-linear integrated photonic and polaritonic circuits6,7.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
An exciton-polariton laser based on biologically produced fluorescent protein
Authors:
Christof P. Dietrich,
Anja Steude,
Laura Tropf,
Marcel Schubert,
Nils M. Kronenberg,
K. Ostermann,
Sven Höfling,
Malte C. Gather
Abstract:
Under adequate conditions, cavity-polaritons form a macroscopic coherent quantum state, known as Bose-Einstein condensate (BEC). Compared to Wannier-Mott excitons in inorganic semiconductors, the localized Frenkel excitons in organic emitter materials show weaker interaction but stronger coupling, which recently enabled the first realization of BEC at room temperature. However, this required ultra…
▽ More
Under adequate conditions, cavity-polaritons form a macroscopic coherent quantum state, known as Bose-Einstein condensate (BEC). Compared to Wannier-Mott excitons in inorganic semiconductors, the localized Frenkel excitons in organic emitter materials show weaker interaction but stronger coupling, which recently enabled the first realization of BEC at room temperature. However, this required ultrafast optical pum** which limits the applications of organic BECs. Here, we demonstrate room-temperature BEC of cavity-polaritons in simple laminated microcavities filled with the biologically produced enhanced green fluorescent protein (eGFP). The unique molecular structure of eGFP prevents exciton annihilation even at high excitation densities, thus facilitating BEC under conventional nanosecond pum**. BEC is clearly evidenced by a distinct threshold, an interaction-induced blueshift of the condensate, long-range coherence and the presence of a second threshold at higher excitation density which is associated with the onset of photon lasing and results from thermalization of the exciton reservoir.
△ Less
Submitted 15 September, 2016; v1 submitted 26 January, 2016;
originally announced January 2016.
-
GaAs integrated quantum photonics: Towards dense and fully-functional quantum photonic integrated circuits
Authors:
Christof P. Dietrich,
Andrea Fiore,
Mark G. Thompson,
Martin Kamp,
Sven Höfling
Abstract:
The recent progress in integrated quantum optics has set the stage for the development of an integrated platform for quantum information processing with photons, with potential applications in quantum simulation. Among the different material platforms being investigated, direct-bandgap semiconductors and particularly gallium arsenide (GaAs) offer the widest range of functionalities, including sing…
▽ More
The recent progress in integrated quantum optics has set the stage for the development of an integrated platform for quantum information processing with photons, with potential applications in quantum simulation. Among the different material platforms being investigated, direct-bandgap semiconductors and particularly gallium arsenide (GaAs) offer the widest range of functionalities, including single- and entangled-photon generation by radiative recombination, low-loss routing, electro-optic modulation and single-photon detection. This paper reviews the recent progress in the development of the key building blocks for GaAs quantum photonics and the perspectives for their full integration in a fully-functional and densely integrated quantum photonic circuit.
△ Less
Submitted 1 August, 2016; v1 submitted 26 January, 2016;
originally announced January 2016.
-
Room-temperature condensation in whispering gallery microresonators assisted by longitudinal optical phonons
Authors:
Christof P. Dietrich,
Rüdiger Schmidt-Grund,
Tom Michalsky,
Martin Lange,
Marius Grundmann
Abstract:
We report condensation of hexagonal whispering gallery modes (WGM) at room temperature in ZnO microwires that embody nearly perfect polygonal whispering gallery microresonators. The condensate regime is achieved in the UV spectral range only at energies below the first longitudinal optical (LO) phonon replica of the free ZnO A-exciton transition and at non-zero wave vectors. We demonstrate that th…
▽ More
We report condensation of hexagonal whispering gallery modes (WGM) at room temperature in ZnO microwires that embody nearly perfect polygonal whispering gallery microresonators. The condensate regime is achieved in the UV spectral range only at energies below the first longitudinal optical (LO) phonon replica of the free ZnO A-exciton transition and at non-zero wave vectors. We demonstrate that the multimodality of the WGM system and the high population of free excitons and phonons with various momenta strongly enhance the probability of an interaction of quasiparticles of the cavity exciton-photon system with LO phonons. We further examine the far-field mode pattern of lasing WGM and demonstrate their spatial coherence.
△ Less
Submitted 6 January, 2015;
originally announced January 2015.
-
Phonon-Assisted Lasing in ZnO Microwires at Room Temperature
Authors:
T. Michalsky,
M. Wille,
C. P. Dietrich,
R. Röder,
C. Ronning,
R. Schmidt-Grund,
M. Grundmann
Abstract:
We report on room temperature phonon-assisted whispering gallery mode (WGM) lasing in ZnO microwires. For WGM laser action on the basis of the low gain phonon scattering process high quality resonators with sharp corners and smooth facets are prerequisite. Above the excitation threshold power $P_{\textit{Th}}$ of typically $100\,kW/cm^2$, the recombination of free excitons under emission of two lo…
▽ More
We report on room temperature phonon-assisted whispering gallery mode (WGM) lasing in ZnO microwires. For WGM laser action on the basis of the low gain phonon scattering process high quality resonators with sharp corners and smooth facets are prerequisite. Above the excitation threshold power $P_{\textit{Th}}$ of typically $100\,kW/cm^2$, the recombination of free excitons under emission of two longitudinal optical phonons provides sufficient gain to overcome all losses in the microresonator and to result in laser oscillation. This threshold behavior is accompanied by a distinct change of the far and near field emission patterns, revealing the WGM related nature of the lasing modes. The spectral evolution as well as the characteristic behavior of the integrated photoluminescence intensity versus the excitation power unambiguously prove laser operation. Polarization-resolved measurements show that the laser emission is linear polarized perpendicular to the microwire axis (TE).
△ Less
Submitted 14 November, 2014; v1 submitted 29 October, 2014;
originally announced October 2014.
-
Characterisation of Ferromagnetic Contacts to Carbon Nanotubes
Authors:
D. Preusche,
S. Schmidmeier,
E. Pallecchi,
Ch. Dietrich,
A. K. Huettel,
J. Zweck,
Ch. Strunk
Abstract:
We present an investigation of different thin-film evaporated ferromagnetic materials for their suitability as electrodes in individual single-wall and multi-wall carbon nanotube-based spin devices. Various electrode shapes made from permalloy (Ni_{81}Fe_{19}), the diluted ferromagnet PdFe, and PdFe/Fe bilayers are studied for both their micromagnetic properties and their contact formation to ca…
▽ More
We present an investigation of different thin-film evaporated ferromagnetic materials for their suitability as electrodes in individual single-wall and multi-wall carbon nanotube-based spin devices. Various electrode shapes made from permalloy (Ni_{81}Fe_{19}), the diluted ferromagnet PdFe, and PdFe/Fe bilayers are studied for both their micromagnetic properties and their contact formation to carbon nanotubes. Suitable devices are tested in low-temperature electron transport measurements, displaying the typical tunneling magnetoresistance of carbon nanotube pseudo spin valves.
△ Less
Submitted 13 August, 2009; v1 submitted 6 April, 2009;
originally announced April 2009.