-
Copper do** effects on the superconducting properties of Sm-based oxypnictides
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Taras Palasyuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Cezariusz Jastrzebski,
Michał Wierzbicki,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits…
▽ More
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits a superconducting transition temperature (Tc) of approximately 54 K. The lattice volume (V) is increased with Cu substitution (x) without observing any impurity phase related to copper, which confirms the successful incorporation of Cu at Fe sites in the superconducting FeAs layers. These analyses are also well in agreement with Raman spectroscopy measurements and relevant DFT results. The superconducting transition is decreased systematically with copper do** and completely suppressed for 7% Cu-doped Sm1111 (x = 0.07). A large amount of Cu substitution (x greater than 0.07) has demonstrated the metal to insulate transition in the low-temperature range, and no impurity phase was observed even at high Cu do** levels (x = 0.2). The calculated critical current density of the parent sample is suppressed with copper substitution, suggesting the reduced pinning centers, sample density, and grain connections, as confirmed by the microstructural analysis. Our studies suggest that the substitution of Cu in the superconducting FeAs layer, resulting the enlargement of the lattice volume, is a source of strong disorder scattering, leading to the suppression of Tc and the emergence of metal-to-insulator, unlike the more successful carrier do** by nickel (Ni) or cobalt (Co), as previously reported.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Emergent impervious band crossing in the bulk in topological nodal line semimetal ZrAs$_2$
Authors:
A. S. Wadge,
K. Zberecki,
B. J. Kowalski,
D. Jastrzebski,
P. K. Tanwar,
P. Iwanowski,
R. Diduszko,
A. Moosarikandy,
M. Rosmus,
N. Olszowska,
A. Wisniewski
Abstract:
Topological nodal line semimetals (TSMs) represent a unique class of materials with intriguing electronic structures and rich of symmetries, hosting electronic states with non-trivial topological properties. Among these, ZrAs$_2$ stands out, characterized by its nodal lines forming continuous loops in momentum space, governed by non-symmorphic symmetries. This study integrates angle-resolved photo…
▽ More
Topological nodal line semimetals (TSMs) represent a unique class of materials with intriguing electronic structures and rich of symmetries, hosting electronic states with non-trivial topological properties. Among these, ZrAs$_2$ stands out, characterized by its nodal lines forming continuous loops in momentum space, governed by non-symmorphic symmetries. This study integrates angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations to explore the electronic states of ZrAs$_2$. In ARPES scans, we observed a distinctive nodal loop structure observed at lower excitation energies of 30 and 50 eV. Our results, supported by calculations based on DFT, unveil symmetry-enforced Dirac-like band crossings anchored at specific points in the Brillouin zone, with particular emphasis on the S point. Surface bands and bulk states near the crossing are elucidated through slab calculations, corroborating experimental findings. DFT calculations also show the existence of several spin-orbit coupling (SOC) resilient semi-Dirac crossings pinned at Z point. This comprehensive investigation sheds light on the intricate electronic behaviors of ZrAs$_2$ with the involved symmetries, important for fundamental understanding of topological nodal line semimetals.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Effect of impurity phase and high-pressure synthesis on the superconducting properties of CaKFe4As4
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at…
▽ More
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at ambient pressure (CSP) and studied the influence of impurities on the superconducting properties of CaKFe4As4. Structural, microstructural, transport and magnetization measurements have been performed to reach the final conclusions. Interestingly, the high-pressure synthesis of the parent CaKFe4As4 compound enhances the transition temperature (Tc) by 2 K and the critical current density (Jc) by one order of magnitude in the whole magnetic field range of 9 T than that of the 1144 bulks prepared by CSP. It suggests the improvement of the pinning centers and grain connections by the high-pressure synthesis approach. Interestingly, our results depict the superconducting onset transition temperature (Tconset) of this stoichiometric 1144 family is robust with the presence of the common 122 (CaFe2As2 or KFe2As2) impurity phases, which is a different behavior compared to other FBS families. However, these impurity phases reduce the grain connections and lead to the phase separation during the formation of the superconducting (1144) phase.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Enhancement of Superconducting Properties of Polycrystalline CaKFe4As4 by High-Pressure Growth
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have…
▽ More
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have improved the sample density and grain connectivity. The transition temperature (Tconset) of 1144 bulks prepared by HP-HTS is increased up to 35.2 K with a transition width (ΔT) of 1 K, which is remarkably comparable to the reported 1144 single crystal. Additionally, the critical current density (Jc) is enhanced by almost one order of magnitude compared with the parent compound prepared by the conventional synthesis process at ambient pressure (CSP), which could be attributed to the improved sample density and effective pinning centers. Our study demonstrates that the sample quality and superconducting properties of various iron-based superconductors can be enhanced by applying the HP-HTS approach, and further research is demanded in this direction.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Antimony Do** Effect on the Superconducting Properties of SmFeAs(O,F)
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a l…
▽ More
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a larger size than arsenic (As), the enhancement of lattice parameters has been confirmed by the XRD analysis. Microstructural analysis confirms that Sb-do** leads to a small improvement in the sample density and an increase in the inhomogeneity of the constituent elements, especially at higher Sb-do** levels. The parent compound SmFeAsO0.8F0.2 has shown the superconducting transition (Tc) at ~54 K, which is systematically reduced with the antimony do** contents (x). Our investigation indicates that the Sb-doped SmFeAs(O,F) phase at low levels is less prone to the multiphase formation than at high levels, which affects the inter- and intragranular behaviour originating from the microstructure nature of 1111 bulks. The critical current density (Jc) of the parent compound has almost the same value as previously reported, which is suppressed slowly with increased Sb-do**. It could be due to the reduced grain connections and the effective pinning centers. This study confirms that the superconducting FeAs layer do** with larger ions at arsenic sites does not support the superconducting properties of Sm1111, which is a distinct behavior from that of Sb-doped CeFeAs(O,F) and LaFeAs(O,F).
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Comparison of Gd addition effect on the superconducting properties of FeSe0.5Te0.5 bulks under ambient and high-pressure conditions
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Jan Mizeracki,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizatio…
▽ More
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizations have been performed on these samples in order to draw the final conclusion. Our analysis results that the HP-HTS applied for the parent compound enhances the transition temperature (Tc) and the critical current density (Jc) with the improved sample density and intergrain connections. The lattice parameter c is increased with Gd additions, suggesting a small amount of Gd enters the tetragonal lattice of FeSe0.5Te0.5 and the Gd interstitial sites are along the c-axis. A systematic decrease of the onset transition temperature Tc is observed with Gd additions, however, the calculated Jc of these Gd-added samples is almost the same as that of the parent compound prepared by CSP. It specifies that there is no improvement of the grain connections or pinning properties due to these rare earth additions. However, Gd-added FeSe0.5Te0.5 bulks prepared by HP-HTS have revealed a slightly improved critical current density due to improved grain connections and sample density but have a lower transition temperature than that of the parent compounds.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Effect of Pb addition on microstructure, transport properties and the critical current density in a polycrystalline FeSe0.5Te0.5
Authors:
Shiv J. Singh,
Ryszard Diduszko,
Przemysław Iwanowski,
Tomasz Cetner,
Andrzej Wisniewski,
Andrzej Morawski
Abstract:
We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offs…
▽ More
We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offset of 12 K. The addition of Pb enhances the metallic characteristics of FeSe0.5Te0.5, but both Tc onset and Tc offset are decreased to the lower temperature with the broadened transition width. The Tc onset is nearly the same (10.3 K) at higher additions, such as x = 0.3 and 0.4, but zero resistivity is not observed up to 7 K. Microstructural analysis and transport studies suggest that for x > 0.05, Pb additions weakened the coupling between grains and suppressed the superconducting percolation, leading to a broad transition. More importantly, the inclusion of a relatively small amount of Pb (x = 0.05) increased the critical current density, Jc, in the entire magnetic field, which might be attributable to better phase uniformity as well as good grain connectivity.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Cometal addition effect on superconducting properties and granular behaviours of polycrystalline FeSe0.5Te0.5
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pur…
▽ More
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pure FeSe0.5Te0.5 by 1 K, sharpening the superconducting transition and improving the metallic nature in the normal state, whereas larger metal additions reduce Tconset by broadening the superconducting transition. Microstructural analysis and transport studies suggest that at x=y>0.02, Pb and Sn additions enhance the impurity phases, reduce the coupling between grains, and suppress the superconducting percolation, leading to a broad transition. FeSe0.5Te0.5 samples with 2wt% of cometal additions show the best performance with their critical current density, Jc, and the pinning force, Fp, which might be attributable to providing effective flux pinning centres. Our study shows that the inclusion of a relatively small amount of Pb and Sn works effectively for the enhancement of superconducting properties with an improvement of intergrain connections as well as better phase uniformity.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
High-pressure synthesis and the enhancement of the superconducting properties of FeSe0.5Te0.5
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Jarosław Więckowski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk…
▽ More
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk samples under a range of growth pressures using Ta-tube and without Tatube. The parent compound synthesized by convenient synthesis method at ambient pressure (CSP) exhibits a superconducting transition temperature of 14.8 K. Our data demonstrate that the prepared FeSe0.5Te0.5 sealed in a Ta-tube is of better quality than the samples without a Ta-tube, and the optimum growth conditions (500 MPa, 600°C for 1 h) are favourable for the development of the tetragonal FeSe0.5Te0.5 phase. The optimum bulk FeSe0.5Te0.5 depicts a higher transition temperature of 17.3 K and a high critical current density of the order of >10^4 A/cm^2 at 0 T, which is improved over the entire magnetic field range and almost twice higher than the parent compound prepared through CSP. Our studies confirm that the high-pressure synthesis method is a highly efficient way to improve the superconducting transition, grain connectivity, sample density, and also pinning properties of a superconductor.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
The K-X-ray intensity ratios as a tool of examination and thickness measurements of coating layers
Authors:
Aneta Maria Gójska,
Ewelina Agnieszka Miśta-Jakubowska,
Karol Kozioł,
Adam Wasilewski,
Ryszard Diduszko
Abstract:
The ED-XRF (Energy-Dispersive X-ray Fluorescence) measurements and the FLUKA simulations have been made to discuss the possibility of recognition of coating layer as well as to its thickness measurement. In this work the $I_{Kα}$(Cu)/$I_{Kα}$(Ag) intensity ratios as well as $I_{Kβ}$(Ag)/$I_{Kα}$(Ag) and $I_{Kβ}$(Cu)/$I_{Kα}$(Cu) for copper samples coated with various thickness of sputtered silver…
▽ More
The ED-XRF (Energy-Dispersive X-ray Fluorescence) measurements and the FLUKA simulations have been made to discuss the possibility of recognition of coating layer as well as to its thickness measurement. In this work the $I_{Kα}$(Cu)/$I_{Kα}$(Ag) intensity ratios as well as $I_{Kβ}$(Ag)/$I_{Kα}$(Ag) and $I_{Kβ}$(Cu)/$I_{Kα}$(Cu) for copper samples coated with various thickness of sputtered silver have been analyzed. The results show strong dependence of these factors with coating silver layer thickness. The measurements show the performance of this method in archaeometry. Since the use of non-destructive methods during tests on ancient silver artifacts may not supply to obtain reliable bulk results and should be considered applicable for only surface analyses, the measured intensity ratios can be applied as a tool to estimation of surface silver enrichment thickness.
△ Less
Submitted 14 November, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Absolute radiation tolerance of amorphous alumina coatings at room temperature
Authors:
A. Zaborowska,
Ł. Kurpaska,
M. Clozel,
E. J. Olivier,
J. H. O'Connell,
M. Vanazzi,
F. Di Fonzo,
A. Azarov,
I. Jóźwik,
M. Frelek-Kozak,
R. Diduszko,
J. H. Neethling,
J. Jagielski
Abstract:
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine and ion-modified specimens were investigated using the nanoindentation technique. A comprehensive characterization combining Transmission Electron Microscopy an…
▽ More
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine and ion-modified specimens were investigated using the nanoindentation technique. A comprehensive characterization combining Transmission Electron Microscopy and Grazing-Incidence X-ray Diffraction provided deep insight into the structure of the tested material at the nano- and micro- scale. Variation in the local atomic ordering of the irradiated zone at different doses was investigated using a reduced distribution function analysis obtained from electron diffraction data. Findings from nanoindentation measurements revealed a slight reduction in hardness of all irradiated layers. At the same time TEM examination indicated that the irradiated layer remained amorphous over the whole dpa range. No evidence of crystallization, void formation or element segregation was observed up to the highest implanted dose. Reported mechanical and structural findings were critically compared with each other pointing to the conclusion that under given irradiation conditions, over the whole range of doses used, alumina coatings exhibit excellent radiation resistance. Obtained data strongly suggest that investigated material may be considered as a promising candidate for next-generation nuclear reactors, especially LFR-type, where high corrosion protection is one of the highest prerogatives to be met.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Mechanical behavior of ion-irradiated ODS RAF steels strengthened with different types of refractory oxides
Authors:
M. Frelek-Kozak,
Ł. Kurpaska,
K. Mulewska,
M. Zieliński,
R. Diduszko,
A. Kosińska,
D. Kalita,
W. Chromiński,
M. Turek,
K. Kaszyca,
A. Zaborowska,
J. Jagielski
Abstract:
In the present work, authors focused on verifying structural and mechanical properties of Oxide Dispersed Strengthening (ODS) steels strengthened by three different types of refractory oxides submitted to ion-irradiation. Three materials strengthened with Y2O3 or Al2O3 or ZrO2 were produced by mechanical alloying and Spark Plasma Sintering technique. Specimens have been submitted to high energy Ar…
▽ More
In the present work, authors focused on verifying structural and mechanical properties of Oxide Dispersed Strengthening (ODS) steels strengthened by three different types of refractory oxides submitted to ion-irradiation. Three materials strengthened with Y2O3 or Al2O3 or ZrO2 were produced by mechanical alloying and Spark Plasma Sintering technique. Specimens have been submitted to high energy Ar-ion irradiation at room temperature with three fluences. This procedure allowed to generate strongly damaged zone with a thickness of 230nm. SEM/EBSD and TEM observations, GIXRD analysis, and nanoindentation tests have been included in examination of modified layers. Investigation revealed alteration of structural and mechanical features as a result of Ar-irradiation. Obtained results showed a strong correlation between the strengthening oxide and materials' behavior under radiation damage. It has been proved that below 1x1015ions/cm2 mechanical properties in the modified layer of all materials are very similar. Reported behavior may be related to the efficient annealing of the radiation defect process. Above this limit, significant differences between the materials are visible. It is believed that described phenomenon is directly related to the presence of the structural features and their capacity to act as defect sinks. Consequently, type of dominant mechanisms occurring in modified layer is proposed.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Microstructure and mechanical properties of mechanically-alloyed CoCrFeNi high-entropy alloys using low ball-to-powder ratio
Authors:
A. Olejarz,
W. Y. Huo,
M. Zielinski,
R. Diduszko,
E. Wyszkowska,
A. Kosinska,
D. Kalita,
I. Jozwik,
M. Chmielewski,
F. Fang,
L. Kurpaska
Abstract:
High-entropy alloys are extensively studied due to their very promising properties. However manufacturing methods currently used to prepare HEAs are complicated, costly, and likely non-industrially scalable processes. This limits their evolution and poses questions regarding the material's applicability in the future. Considering the abovementioned point, we developed a novel methodology for effic…
▽ More
High-entropy alloys are extensively studied due to their very promising properties. However manufacturing methods currently used to prepare HEAs are complicated, costly, and likely non-industrially scalable processes. This limits their evolution and poses questions regarding the material's applicability in the future. Considering the abovementioned point, we developed a novel methodology for efficient HEA production using a low ball-to-powder ratio (BPR). Using different milling times, we manufactured four HEA powder precursors using a BPR of 5:1, which were later sintered via the Spark Plasma Sintering technique and heat treated. Microstructural characterization was performed by optical microscopy, Scanning Electron Microscopy equipped with EDS and EBSD detectors, and X-ray diffraction. Mechanical properties were measured using nano and microhardness techniques. In this work, we follow the structural evolution of the material and connect it with the strengthening effect as a function of milling time. Furthermore, we discuss the impact of different sintering and annealing conditions, proving that HEAs characterized by high mechanical properties may be manufactured using low BPR.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Electronic properties of TaAs2 topological semimetal investigated by transport and ARPES
Authors:
A. S. Wadge,
G. Grabecki,
C. Autieri,
B. J. Kowalski,
P. Iwanowski,
G. Cuono,
M. F. Islam,
C. M. Canali,
K. Dybko,
A. Hruban,
A. Łusakowski,
T. Wojciechowski,
R. Diduszko,
A. Lynnyk,
N. Olszowska,
M. Rosmus,
J. Kołodziej,
A. Wiśniewski
Abstract:
We have performed electron transport and ARPES measurements on single crystals of transition metal dipnictide TaAs2 cleaved along the ($\overline{2}$ 0 1) surface which has the lowest cleavage energy. A Fourier transform of the Shubnikov-de Haas oscillations shows four different peaks whose angular dependence was studied with respect to the angle between the magnetic field and the [$\overline{2}$…
▽ More
We have performed electron transport and ARPES measurements on single crystals of transition metal dipnictide TaAs2 cleaved along the ($\overline{2}$ 0 1) surface which has the lowest cleavage energy. A Fourier transform of the Shubnikov-de Haas oscillations shows four different peaks whose angular dependence was studied with respect to the angle between the magnetic field and the [$\overline{2}$ 0 1] direction. The results indicate the elliptical shape of the Fermi surface cross-sections. Additionally, a mobility spectrum analysis was carried out, which also reveals at least four types of carriers contributing to the conductance (two kinds of electrons and two kinds of holes). ARPES spectra were taken on freshly cleaved ($\overline{2}$ 0 1) surface and it was found that bulk states pockets at the constant energy surface are elliptical, which confirms the magnetotransport angle dependent studies. First-principles calculations support the interpretation of the experimental results. The theoretical calculations better reproduce the ARPES data if the theoretical Fermi level is increased, which is due to a small n-do** of the samples. This shifts the Fermi level closer to the Dirac point, allowing to investigate the physics of the Dirac and Weyl points, making this compound a platform for the investigation of the Dirac and Weyl points in three-dimensional materials.
△ Less
Submitted 10 January, 2022; v1 submitted 9 August, 2021;
originally announced August 2021.
-
Microstructural and transport properties of superconducting FeTe0.65Se0.35 crystals
Authors:
A. G. Sivakov,
S. I. Bondarenko,
A. I. Prokhvatilov,
V. P. Timofeev,
A. S. Pokhila,
V. P. Koverya,
I. S. Dudar,
S. I. Link,
I. V. Legchenkova,
A. N. Bludov,
V. Yu. Monarkha,
D. J. Gawryluk,
J. Pietosa,
M. Berkowski,
R. Diduszko,
R. Puzniak,
A. Wisniewski
Abstract:
The issue concerning the nature and the role of microstructural inhomogeneities in iron chalcogenide superconducting crystals of FeTe0.65Se0.35 and their correlation with transport properties of this system was addressed. Presented data demonstrate that chemical disorder originating from the kinetics of the crystal growth process significantly influences the superconducting properties of an Fe-Te-…
▽ More
The issue concerning the nature and the role of microstructural inhomogeneities in iron chalcogenide superconducting crystals of FeTe0.65Se0.35 and their correlation with transport properties of this system was addressed. Presented data demonstrate that chemical disorder originating from the kinetics of the crystal growth process significantly influences the superconducting properties of an Fe-Te-Se system. Transport measurements of the transition temperature and critical current density performed for microscopic bridges allow us to deduce the local properties of a superconductor with microstructural inhomogeneities, and significant differences were noted. The variances observed in the local properties were explained as a consequence of weak superconducting links existing in the studied crystals. The results confirm that inhomogeneous spatial distribution of ions and small hexagonal symmetry nanoscale regions with nanoscale phase separation also seem to enhance the superconductivity in this system with respect to the values of the critical current density. Magnetic measurements confirm the conclusions drawn from the transport measurements.
△ Less
Submitted 25 November, 2016;
originally announced November 2016.
-
Electron Paramagnetic Resonance of Mn in Bi$_2$Se$_3$ Topological Insulator
Authors:
Agnieszka Wolos,
Aneta Drabinska,
Maria Kaminska,
Andrzej Hruban,
Stanislawa G. Strzelecka,
Andrzej Materna,
Miroslaw Piersa,
Magdalena Romaniec,
Ryszard Diduszko
Abstract:
Electron paramagnetic resonance was used to investigate Mn impurity in Bi$_2$Se$_3$ topological insulator grown by the vertical Bridgman method. Mn in high-spin S = 5/2, Mn$^2$$^+$ configuration, was detected regardless of the conductivity type of the host material. This means that Mn$^2$$^+$(d$^5$) energy level is located within the valence band, and Mn$^1$$^+$(d$^6$) energy level is outside the…
▽ More
Electron paramagnetic resonance was used to investigate Mn impurity in Bi$_2$Se$_3$ topological insulator grown by the vertical Bridgman method. Mn in high-spin S = 5/2, Mn$^2$$^+$ configuration, was detected regardless of the conductivity type of the host material. This means that Mn$^2$$^+$(d$^5$) energy level is located within the valence band, and Mn$^1$$^+$(d$^6$) energy level is outside the energy gap of Bi$_2$Se$_3$. The electron paramagnetic resonance spectrum of Mn$^2$$^+$ in Bi$_2$Se$_3$ is characterized by the isotropic g-factor |g| = 1.91 and large axial parameter D = -4.20 GHz x h. This corresponds to the zero-field splitting of the Kramers doublets equal to 8.4 GHz x h and 16.8 GHz x h, respectively, which is comparable to the Zeeman splitting for the X-band. Mn in Bi$_2$Se$_3$ acts as an acceptor, effectively reducing native-high electron concentration, compensating selenium vacancies, and resulting in p-type conductivity.
△ Less
Submitted 5 December, 2014;
originally announced December 2014.
-
Synthesis, Crystal Growth and Epitaxial Layer Deposition of FeSe0.88 Superconductor and Other Poison Materials by Use of High Gas Pressure Trap System
Authors:
O. Tkachenko,
A. Morawski,
A. J. Zaleski,
P. Przyslupski,
T. Dietl,
R. Diduszko,
A. Presz,
K. Werner-Malento
Abstract:
The FeSe samples in the form of polycrystals, single crystals and thin films have been prepared and characterized. The synthesized material has been hot isostatically pressed under pressure of 0.45 GPa of 5N purity argon with the use of the high gas pressure trap system (HGPTS). Thin films have been fabricated by the mixed procedures with the use of DC sputtering from various types of targets and…
▽ More
The FeSe samples in the form of polycrystals, single crystals and thin films have been prepared and characterized. The synthesized material has been hot isostatically pressed under pressure of 0.45 GPa of 5N purity argon with the use of the high gas pressure trap system (HGPTS). Thin films have been fabricated by the mixed procedures with the use of DC sputtering from various types of targets and processed employing the HGPTS. The used HGPTS assures a full separation of the active volume for synthesis or crystal growth of material and the inert gas medium. The obtained FeSe0.88 samples have Tc between 8 and 12 K. The samples have been characterized by SEM, EDX, XRD, magnetic susceptibility and resistivity measurements.
△ Less
Submitted 25 August, 2011;
originally announced August 2011.
-
Phase transitions in single-crystalline magnetoelectric LiCoPO4
Authors:
A. Szewczyk,
M. U. Gutowska,
J. Wieckowski,
A. Wisniewski,
R. Puzniak,
R. Diduszko,
Yu. Kharchenko,
M. F. Kharchenko,
H. Schmid
Abstract:
Specific heat, magnetic torque, and magnetization studies of LiCoPO4 olivine are presented. They show that an unique set of physical properties of LiCoPO4 leads to the appearance of features characteristic of 2D Ising systems near the Neel temperature, T_N =21.6 K, and to the appearance of an uncommon effect of influence of magnetic field on the magnetocrystalline anisotropy. The latter effect man…
▽ More
Specific heat, magnetic torque, and magnetization studies of LiCoPO4 olivine are presented. They show that an unique set of physical properties of LiCoPO4 leads to the appearance of features characteristic of 2D Ising systems near the Neel temperature, T_N =21.6 K, and to the appearance of an uncommon effect of influence of magnetic field on the magnetocrystalline anisotropy. The latter effect manifests itself as a first-order transition, discovered at ~9 K, induced by magnetic field of 8 T. Physical nature of this transition was explained and a model describing experimental dependences satisfactorily was proposed.
△ Less
Submitted 29 July, 2011;
originally announced July 2011.
-
The investigation of YAlO3-NdAlO3 system, synthesis and characterization
Authors:
A. Szysiak,
D. Klimm,
S. Ganschow,
M. Mirkowska,
R. Diduszko,
L. Lipińska,
A. Kwasniewski,
A. Pajączkowska
Abstract:
The binary phase diagram of the YAlO3 (YAP) - NdAlO3 (NAP) system was determined by differential thermal analysis (DTA) and X-ray powder diffraction (XRD) measurements. High purity nanocrystalline powders and small single crystals of Y_{1-x}Nd_{x}AlO_3 (0 \leq x \leq 1) have been produced successfully by modified sol-gel (Pechini) and micro-pulling-down methods, respectively. Both end members show…
▽ More
The binary phase diagram of the YAlO3 (YAP) - NdAlO3 (NAP) system was determined by differential thermal analysis (DTA) and X-ray powder diffraction (XRD) measurements. High purity nanocrystalline powders and small single crystals of Y_{1-x}Nd_{x}AlO_3 (0 \leq x \leq 1) have been produced successfully by modified sol-gel (Pechini) and micro-pulling-down methods, respectively. Both end members show high mutual solubility >25% in the solid phase, with a miscibility gap for intermediate compositions. A solid solution with x \approx 0.2 melts azeotropic ca. 20 degrees below pure YAP. Such crystals can be grown from the melt without segregation. The narrow solid/liquid region near the azeotrope point could be measured with a "cycling" DTA measurement technique.
△ Less
Submitted 2 March, 2011; v1 submitted 1 March, 2011;
originally announced March 2011.
-
Growth conditions, structure, and superconductivity of pure and metal-doped FeTe1-xSex single crystals
Authors:
D. J. Gawryluk,
J. Fink-Finowicki,
A. Wisniewski,
R. Puzniak,
V. Domukhovski,
R. Diduszko,
M. Kozlowski,
M. Berkowski
Abstract:
Superconducting single crystals of pure FeTe1 xSex and FeTe0.65Se0.35 doped with Co, Ni, Cu, Mn, Zn, Mo, Cd, In, Pb, Hg, V, Ga, Mg, Al, Ti, Cr, Sr or Nd into Fe ions site have been grown applying Bridgman's method. It has been found that the sharpness of transition to the superconducting state in FeTe1 xSex is evidently inversely correlated with crystallographic quality of the crystals. Among all…
▽ More
Superconducting single crystals of pure FeTe1 xSex and FeTe0.65Se0.35 doped with Co, Ni, Cu, Mn, Zn, Mo, Cd, In, Pb, Hg, V, Ga, Mg, Al, Ti, Cr, Sr or Nd into Fe ions site have been grown applying Bridgman's method. It has been found that the sharpness of transition to the superconducting state in FeTe1 xSex is evidently inversely correlated with crystallographic quality of the crystals. Among all of the studied dopants only Co, Ni and Cu substitute Fe ions in FeTe0.65Se0.35 crystals. The remaining examined ions do not incorporate into the crystal structure. Nevertheless, they form inclusions together with selenium, tellurium and/or iron, what changes the chemical composition of host matrix and therefore influences Tc value. Small disorder introduced into magnetic sublattice, by partial replacement of Fe ions by slight amount of nonmagnetic ions of Cu (~ 1.5 at%) or by magnetic ions of Ni (~ 2 at%) and Co (~5 at%) with spin value different than that of Fe ion, completely suppresses superconductivity in FeTe1 xSex system. This indicates that even if superconductivity is observed in the system containing magnetic ions it can not survive when the disorder in magnetic ions sublattice is introduced, most likely because of magnetic scattering of Cooper pairs.
△ Less
Submitted 8 May, 2012; v1 submitted 20 October, 2010;
originally announced October 2010.