-
Using gravitational light deflection in optical cavities for laser frequency stabilization
Authors:
Sebastian Ulbricht,
Johannes Dickmann,
Andrey Surzhykov
Abstract:
We theoretically investigate the propagation of light in the presence of a homogeneous gravitational field. To model this, we derive the solutions of the wave equation in Rindler spacetime, which account for gravitational redshift and light deflection. The developed theoretical framework is used to explore the propagation of plane light waves in a horizontal Fabry-Perot cavity. We pay particular a…
▽ More
We theoretically investigate the propagation of light in the presence of a homogeneous gravitational field. To model this, we derive the solutions of the wave equation in Rindler spacetime, which account for gravitational redshift and light deflection. The developed theoretical framework is used to explore the propagation of plane light waves in a horizontal Fabry-Perot cavity. We pay particular attention to the cavity output power. It is shown that this power depends not only on the input frequency, but also on the vertical position of a detector. We state that the height-dependent detector signal arising from the cavity internal light deflection effect (CILD-effect) also opens a new alternative way to frequency stabilization in Earth-based laser experiments and to study gravitational light deflection at laboratory scales.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
UNIFY: Multi-Belief Bayesian Grid Framework based on Automotive Radar
Authors:
Stefan Haag,
Bharanidhar Duraisamy,
Daniel Pfrommer,
Wolfgang Koch,
Martin Fritzsche,
Jurgen Dickmann
Abstract:
Grid maps are widely established for the representation of static objects in robotics and automotive applications. Though, incorporating velocity information is still widely examined because of the increased complexity of dynamic grids concerning both velocity measurement models for radar sensors and the representation of velocity in a grid framework. In this paper, both issues are addressed: sens…
▽ More
Grid maps are widely established for the representation of static objects in robotics and automotive applications. Though, incorporating velocity information is still widely examined because of the increased complexity of dynamic grids concerning both velocity measurement models for radar sensors and the representation of velocity in a grid framework. In this paper, both issues are addressed: sensor models and an efficient grid framework, which are required to ensure efficient and robust environment perception with radar. To that, we introduce new inverse radar sensor models covering radar sensor artifacts such as measurement ambiguities to integrate automotive radar sensors for improved velocity estimation.
Furthermore, we introduce UNIFY, a multiple belief Bayesian grid map framework for static occupancy and velocity estimation with independent layers. The proposed UNIFY framework utilizes a grid-cell-based layer to provide occupancy information and a particle-based velocity layer for motion state estimation in an autonomous vehicle's environment. Each UNIFY layer allows individual execution as well as simultaneous execution of both layers for optimal adaption to varying environments in autonomous driving applications.
UNIFY was tested and evaluated in terms of plausibility and efficiency on a large real-world radar data-set in challenging traffic scenarios covering different densities in urban and rural sceneries.
△ Less
Submitted 24 April, 2021;
originally announced April 2021.
-
RadarScenes: A Real-World Radar Point Cloud Data Set for Automotive Applications
Authors:
Ole Schumann,
Markus Hahn,
Nicolas Scheiner,
Fabio Weishaupt,
Julius F. Tilly,
Jürgen Dickmann,
Christian Wöhler
Abstract:
A new automotive radar data set with measurements and point-wise annotations from more than four hours of driving is presented. Data provided by four series radar sensors mounted on one test vehicle were recorded and the individual detections of dynamic objects were manually grouped to clusters and labeled afterwards. The purpose of this data set is to enable the development of novel (machine lear…
▽ More
A new automotive radar data set with measurements and point-wise annotations from more than four hours of driving is presented. Data provided by four series radar sensors mounted on one test vehicle were recorded and the individual detections of dynamic objects were manually grouped to clusters and labeled afterwards. The purpose of this data set is to enable the development of novel (machine learning-based) radar perception algorithms with the focus on moving road users. Images of the recorded sequences were captured using a documentary camera. For the evaluation of future object detection and classification algorithms, proposals for score calculation are made so that researchers can evaluate their algorithms on a common basis. Additional information as well as download instructions can be found on the website of the data set: www.radar-scenes.com.
△ Less
Submitted 18 February, 2024; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Motion Classification and Height Estimation of Pedestrians Using Sparse Radar Data
Authors:
Markus Horn,
Ole Schumann,
Markus Hahn,
Jürgen Dickmann,
Klaus Dietmayer
Abstract:
A complete overview of the surrounding vehicle environment is important for driver assistance systems and highly autonomous driving. Fusing results of multiple sensor types like camera, radar and lidar is crucial for increasing the robustness. The detection and classification of objects like cars, bicycles or pedestrians has been analyzed in the past for many sensor types. Beyond that, it is also…
▽ More
A complete overview of the surrounding vehicle environment is important for driver assistance systems and highly autonomous driving. Fusing results of multiple sensor types like camera, radar and lidar is crucial for increasing the robustness. The detection and classification of objects like cars, bicycles or pedestrians has been analyzed in the past for many sensor types. Beyond that, it is also helpful to refine these classes and distinguish for example between different pedestrian types or activities. This task is usually performed on camera data, though recent developments are based on radar spectrograms. However, for most automotive radar systems, it is only possible to obtain radar targets instead of the original spectrograms. This work demonstrates that it is possible to estimate the body height of walking pedestrians using 2D radar targets. Furthermore, different pedestrian motion types are classified.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Impact of Earth's gravity on Gaussian beam propagation in hemispherical cavities
Authors:
Sebastian Ulbricht,
Johannes Dickmann,
Robert A. Müller,
Stefanie Kroker,
Andrey Surzhykov
Abstract:
We theoretically investigate the influence of gravity on laser light in a hemispherical optical cavity, operating on Earth. The propagation of light in such a cavity is modeled by a Gaussian beam, affected by the Earth's gravitational field. On laboratory scale, this field is described by the spacetime of homogeneous gravity, known as Rindler spacetime. In that spacetime, the beam is bent downward…
▽ More
We theoretically investigate the influence of gravity on laser light in a hemispherical optical cavity, operating on Earth. The propagation of light in such a cavity is modeled by a Gaussian beam, affected by the Earth's gravitational field. On laboratory scale, this field is described by the spacetime of homogeneous gravity, known as Rindler spacetime. In that spacetime, the beam is bent downwards and acquires a height dependent phase shift. As a consequence the phase fronts of the laser light differ from those of a usual Gaussian beam. Assuming that the initial beam enters the cavity along its symmetry axis, these gravitational effects cause variations of the beam phase with every cavity round trip. Detailed calculations are performed to investigate how these phase variations depend on the beam parameters and the cavity setup. Moreover, we discuss the implications of our findings for cavity calibration techniques and cavity-based laser stabilization procedures.
△ Less
Submitted 15 March, 2021; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Off-the-shelf sensor vs. experimental radar -- How much resolution is necessary in automotive radar classification?
Authors:
Nicolas Scheiner,
Ole Schumann,
Florian Kraus,
Nils Appenrodt,
Jürgen Dickmann,
Bernhard Sick
Abstract:
Radar-based road user detection is an important topic in the context of autonomous driving applications. The resolution of conventional automotive radar sensors results in a sparse data representation which is tough to refine during subsequent signal processing. On the other hand, a new sensor generation is waiting in the wings for its application in this challenging field. In this article, two se…
▽ More
Radar-based road user detection is an important topic in the context of autonomous driving applications. The resolution of conventional automotive radar sensors results in a sparse data representation which is tough to refine during subsequent signal processing. On the other hand, a new sensor generation is waiting in the wings for its application in this challenging field. In this article, two sensors of different radar generations are evaluated against each other. The evaluation criterion is the performance on moving road user object detection and classification tasks. To this end, two data sets originating from an off-the-shelf radar and a high resolution next generation radar are compared. Special attention is given on how the two data sets are assembled in order to make them comparable. The utilized object detector consists of a clustering algorithm, a feature extraction module, and a recurrent neural network ensemble for classification. For the assessment, all components are evaluated both individually and, for the first time, as a whole. This allows for indicating where overall performance improvements have their origin in the pipeline. Furthermore, the generalization capabilities of both data sets are evaluated and important comparison metrics for automotive radar object detection are discussed. Results show clear benefits of the next generation radar. Interestingly, those benefits do not actually occur due to better performance at the classification stage, but rather because of the vast improvements at the clustering stage.
△ Less
Submitted 9 June, 2020;
originally announced June 2020.
-
Thermal charge carrier driven noise in transmissive semiconductor optics
Authors:
F. F. Bruns,
S. P. Vyatchanin,
J. Dickmann,
R. Glaser,
D. Heinert,
R. Nawrodt,
S. Kroker
Abstract:
Several sources of noise limit the sensitivity of current gravitational wave detectors. Currently, dominant noise sources include quantum noise and thermal Brownian noise, but future detectors will also be limited by other thermal noise channels. In this paper we study a thermal noise source which is caused by spatial charge carrier density variations in semiconductor materials. We provide an anal…
▽ More
Several sources of noise limit the sensitivity of current gravitational wave detectors. Currently, dominant noise sources include quantum noise and thermal Brownian noise, but future detectors will also be limited by other thermal noise channels. In this paper we study a thermal noise source which is caused by spatial charge carrier density variations in semiconductor materials. We provide an analytical model for the understanding of charge carrier fluctuations under the presence of screening effects and show that charge carrier noise will not be a limiting noise source for third generation gravitational wave detectors.
△ Less
Submitted 14 March, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
-
Gravitational light deflection in Earth-based laser cavity experiments
Authors:
Sebastian Ulbricht,
Johannes Dickmann,
Robert A. Müller,
Stefanie Kroker,
Andrey Surzhykov
Abstract:
As known from Einstein's theory of general relativity, the propagation of light in the presence of a massive object is affected by gravity. In this work, we discuss whether the effect of gravitational light bending can be observed in Earth-based experiments, using high-finesse optical cavities. In order to do this, we theoretically investigate the dynamics of electromagnetic waves in the spacetime…
▽ More
As known from Einstein's theory of general relativity, the propagation of light in the presence of a massive object is affected by gravity. In this work, we discuss whether the effect of gravitational light bending can be observed in Earth-based experiments, using high-finesse optical cavities. In order to do this, we theoretically investigate the dynamics of electromagnetic waves in the spacetime of a homogeneous gravitational field and give an analytical expression for the resulting modifications to Gaussian beam propagation. This theoretical framework is used to calculate the intensity profile at the output of a Fabry-Pérot cavity and to estimate the imprints of Earth's gravity on the cavity output signal. In particular, we found that gravity causes an asymmetry of the output intensity profile. Based on that, we discuss a measurement scheme, that could be realized in facilities like the GEO600 gravitational wave detector and the AEI 10 m detector prototype.
△ Less
Submitted 10 July, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Seeing Around Street Corners: Non-Line-of-Sight Detection and Tracking In-the-Wild Using Doppler Radar
Authors:
Nicolas Scheiner,
Florian Kraus,
Fangyin Wei,
Buu Phan,
Fahim Mannan,
Nils Appenrodt,
Werner Ritter,
Jürgen Dickmann,
Klaus Dietmayer,
Bernhard Sick,
Felix Heide
Abstract:
Conventional sensor systems record information about directly visible objects, whereas occluded scene components are considered lost in the measurement process. Non-line-of-sight (NLOS) methods try to recover such hidden objects from their indirect reflections - faint signal components, traditionally treated as measurement noise. Existing NLOS approaches struggle to record these low-signal compone…
▽ More
Conventional sensor systems record information about directly visible objects, whereas occluded scene components are considered lost in the measurement process. Non-line-of-sight (NLOS) methods try to recover such hidden objects from their indirect reflections - faint signal components, traditionally treated as measurement noise. Existing NLOS approaches struggle to record these low-signal components outside the lab, and do not scale to large-scale outdoor scenes and high-speed motion, typical in automotive scenarios. In particular, optical NLOS capture is fundamentally limited by the quartic intensity falloff of diffuse indirect reflections. In this work, we depart from visible-wavelength approaches and demonstrate detection, classification, and tracking of hidden objects in large-scale dynamic environments using Doppler radars that can be manufactured at low-cost in series production. To untangle noisy indirect and direct reflections, we learn from temporal sequences of Doppler velocity and position measurements, which we fuse in a joint NLOS detection and tracking network over time. We validate the approach on in-the-wild automotive scenes, including sequences of parked cars or house facades as relay surfaces, and demonstrate low-cost, real-time NLOS in dynamic automotive environments.
△ Less
Submitted 31 March, 2020; v1 submitted 13 December, 2019;
originally announced December 2019.
-
A Multi-Stage Clustering Framework for Automotive Radar Data
Authors:
Nicolas Scheiner,
Nils Appenrodt,
Jürgen Dickmann,
Bernhard Sick
Abstract:
Radar sensors provide a unique method for executing environmental perception tasks towards autonomous driving. Especially their capability to perform well in adverse weather conditions often makes them superior to other sensors such as cameras or lidar. Nevertheless, the high sparsity and low dimensionality of the commonly used detection data level is a major challenge for subsequent signal proces…
▽ More
Radar sensors provide a unique method for executing environmental perception tasks towards autonomous driving. Especially their capability to perform well in adverse weather conditions often makes them superior to other sensors such as cameras or lidar. Nevertheless, the high sparsity and low dimensionality of the commonly used detection data level is a major challenge for subsequent signal processing. Therefore, the data points are often merged in order to form larger entities from which more information can be gathered. The merging process is often implemented in form of a clustering algorithm. This article describes a novel approach for first filtering out static background data before applying a twostage clustering approach. The two-stage clustering follows the same paradigm as the idea for data association itself: First, clustering what is ought to belong together in a low dimensional parameter space, then, extracting additional features from the newly created clusters in order to perform a final clustering step. Parameters are optimized for filtering and both clustering steps. All techniques are assessed both individually and as a whole in order to demonstrate their effectiveness. Final results indicate clear benefits of the first two methods and also the cluster merging process under specific circumstances.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Automated Ground Truth Estimation For Automotive Radar Tracking Applications With Portable GNSS And IMU Devices
Authors:
Nicolas Scheiner,
Stefan Haag,
Nils Appenrodt,
Bharanidhar Duraisamy,
Jürgen Dickmann,
Martin Fritzsche,
Bernhard Sick
Abstract:
Baseline generation for tracking applications is a difficult task when working with real world radar data. Data sparsity usually only allows an indirect way of estimating the original tracks as most objects' centers are not represented in the data. This article proposes an automated way of acquiring reference trajectories by using a highly accurate hand-held global navigation satellite system (GNS…
▽ More
Baseline generation for tracking applications is a difficult task when working with real world radar data. Data sparsity usually only allows an indirect way of estimating the original tracks as most objects' centers are not represented in the data. This article proposes an automated way of acquiring reference trajectories by using a highly accurate hand-held global navigation satellite system (GNSS). An embedded inertial measurement unit (IMU) is used for estimating orientation and motion behavior. This article contains two major contributions. A method for associating radar data to vulnerable road user (VRU) tracks is described. It is evaluated how accurate the system performs under different GNSS reception conditions and how carrying a reference system alters radar measurements. Second, the system is used to track pedestrians and cyclists over many measurement cycles in order to generate object centered occupancy grid maps. The reference system allows to much more precisely generate real world radar data distributions of VRUs than compared to conventional methods. Hereby, an important step towards radar-based VRU tracking is accomplished.
△ Less
Submitted 3 June, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Radar-based Road User Classification and Novelty Detection with Recurrent Neural Network Ensembles
Authors:
Nicolas Scheiner,
Nils Appenrodt,
Jürgen Dickmann,
Bernhard Sick
Abstract:
Radar-based road user classification is an important yet still challenging task towards autonomous driving applications. The resolution of conventional automotive radar sensors results in a sparse data representation which is tough to recover by subsequent signal processing. In this article, classifier ensembles originating from a one-vs-one binarization paradigm are enriched by one-vs-all correct…
▽ More
Radar-based road user classification is an important yet still challenging task towards autonomous driving applications. The resolution of conventional automotive radar sensors results in a sparse data representation which is tough to recover by subsequent signal processing. In this article, classifier ensembles originating from a one-vs-one binarization paradigm are enriched by one-vs-all correction classifiers. They are utilized to efficiently classify individual traffic participants and also identify hidden object classes which have not been presented to the classifiers during training. For each classifier of the ensemble an individual feature set is determined from a total set of 98 features. Thereby, the overall classification performance can be improved when compared to previous methods and, additionally, novel classes can be identified much more accurately. Furthermore, the proposed structure allows to give new insights in the importance of features for the recognition of individual classes which is crucial for the development of new algorithms and sensor requirements.
△ Less
Submitted 28 May, 2019;
originally announced May 2019.
-
Radar-based Feature Design and Multiclass Classification for Road User Recognition
Authors:
Nicolas Scheiner,
Nils Appenrodt,
Jürgen Dickmann,
Bernhard Sick
Abstract:
The classification of individual traffic participants is a complex task, especially for challenging scenarios with multiple road users or under bad weather conditions. Radar sensors provide an - with respect to well established camera systems - orthogonal way of measuring such scenes. In order to gain accurate classification results, 50 different features are extracted from the measurement data an…
▽ More
The classification of individual traffic participants is a complex task, especially for challenging scenarios with multiple road users or under bad weather conditions. Radar sensors provide an - with respect to well established camera systems - orthogonal way of measuring such scenes. In order to gain accurate classification results, 50 different features are extracted from the measurement data and tested on their performance. From these features a suitable subset is chosen and passed to random forest and long short-term memory (LSTM) classifiers to obtain class predictions for the radar input. Moreover, it is shown why data imbalance is an inherent problem in automotive radar classification when the dataset is not sufficiently large. To overcome this issue, classifier binarization is used among other techniques in order to better account for underrepresented classes. A new method to couple the resulting probabilities is proposed and compared to others with great success. Final results show substantial improvements when compared to ordinary multiclass classification
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Automated Ground Truth Estimation of Vulnerable Road Users in Automotive Radar Data Using GNSS
Authors:
Nicolas Scheiner,
Nils Appenrodt,
Jürgen Dickmann,
Bernhard Sick
Abstract:
Annotating automotive radar data is a difficult task. This article presents an automated way of acquiring data labels which uses a highly accurate and portable global navigation satellite system (GNSS). The proposed system is discussed besides a revision of other label acquisitions techniques and a problem description of manual data annotation. The article concludes with a systematic comparison of…
▽ More
Annotating automotive radar data is a difficult task. This article presents an automated way of acquiring data labels which uses a highly accurate and portable global navigation satellite system (GNSS). The proposed system is discussed besides a revision of other label acquisitions techniques and a problem description of manual data annotation. The article concludes with a systematic comparison of conventional hand labeling and automatic data acquisition. The results show clear advantages of the proposed method without a relevant loss in labeling accuracy. Minor changes can be observed in the measured radar data, but the so introduced bias of the GNSS reference is clearly outweighed by the indisputable time savings. Beside data annotation, the proposed system can also provide a ground truth for validating object tracking or other automated driving system applications.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Key signal contributions in photothermal deflection spectroscopy
Authors:
Walter Dickmann,
Johannes Dickmann,
Florian Feilong Bruns,
Stefanie Kroker
Abstract:
We report on key signal contributions in photothermal deflection spectroscopy (PDS) of semiconductors at photon energies below the bandgap energy and show how to extract the actual absorption properties from the measurement data. To this end, we establish a rigorous computation scheme for the deflection signal including semi-analytic raytracing to analyze the underlying physical effects. The compu…
▽ More
We report on key signal contributions in photothermal deflection spectroscopy (PDS) of semiconductors at photon energies below the bandgap energy and show how to extract the actual absorption properties from the measurement data. To this end, we establish a rigorous computation scheme for the deflection signal including semi-analytic raytracing to analyze the underlying physical effects. The computation takes into account linear and nonlinear absorption processes affecting the refractive index and thus leading to a deflection of the probe beam. We find that beside the linear mirage effect, nonlinear absorption mechanisms make a substantial contribution to the signal for strongly focussed pump beams and sample materials with high two-photon absorption coefficients. For example, the measured quadratic absorption contribution exceeds 5% at a pump beam intensity of about ${1.3}\times{10^{5}}\;{W}/{cm^{2}}$ in Si and at ${5}\times{10^{4}}\;{W}/{cm^{2}}$ in GaAs. In addition, our method also includes thermal expansion effects as well as spatial gradients of the attenuation properties. We demonstrate that these effects result in an additional deflection contribution which substantially depends on the distance of the photodetector from the readout point. This distance dependent contribution enhances the surface related PDS signal up to two orders of magnitude and may be misinterpreted as surface absorption if not corrected in the analysis of the measurement data. We verify these findings by PDS measurements on crystalline silicon at a wavelength of 1550 nm and provide guidelines how to extract the actual attenuation coefficient from the PDS signal.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Highly reflective low-noise etalon-based meta-mirror
Authors:
Johannes Dickmann,
Stefanie Kroker
Abstract:
We present a concept of a mirror for the application in high-reflectivity low-noise instruments such as interferometers. The concept is based on an etalon with a metasurface (meta-etalon) on the front and a conventional multilayer stack on the rear surface. The etalon in combination with the metasurface enables a dedicated spatial weighing of the relevant thermal noise processes and by this a subs…
▽ More
We present a concept of a mirror for the application in high-reflectivity low-noise instruments such as interferometers. The concept is based on an etalon with a metasurface (meta-etalon) on the front and a conventional multilayer stack on the rear surface. The etalon in combination with the metasurface enables a dedicated spatial weighing of the relevant thermal noise processes and by this a substantial reduction of the overall read out thermal noise. We exemplary illustrate the benefit of the proposed etalon for thermal noise in two applications: The test masses of the Einstein Telescope gravitational wave detector and a single-crystalline cavity for laser frequency stabilization. In the Einstein Telescope the thermal noise of the etalon even at room temperature outperforms existing concepts for operation temperatures at 10K. For the laser stabilization cavity, a reduction of the modified Allan deviation of an order of magnitude is predicted.
△ Less
Submitted 28 September, 2018;
originally announced October 2018.
-
Thermal noise of beam splitters in laser gravitational wave detectors
Authors:
Johannes Dickmann,
Stefanie Kroker,
Yuri Levin,
Ronny Nawrodt,
Sergey Vyatchanin
Abstract:
We present the calculation of thermal noise in interferometric gravitational-wave detectors due to the thermal fluctuations of the beam splitter (BS). This work makes use of a recently developed method of the analysis of thermal noise in mirrors from first principles, based on the fluctuation dissipation theorem. The evaluation of BS thermal noise is carried out for the two different grav- itation…
▽ More
We present the calculation of thermal noise in interferometric gravitational-wave detectors due to the thermal fluctuations of the beam splitter (BS). This work makes use of a recently developed method of the analysis of thermal noise in mirrors from first principles, based on the fluctuation dissipation theorem. The evaluation of BS thermal noise is carried out for the two different grav- itational wave observatories, GEO600 and the Advanced Laser Interferometer Gravitational Wave Observatory (aLIGO). The analysis evaluates thermal noise from both the substrate and the optical reflective and antireflective stacks located on the BS surface. We demonstrate that the fluctuations of both reflecting and anti-reflecting surfaces significantly contribute to the total thermal noise of the BS. The oscillating intensity pattern couples small-scale distortions of the surface to the overall phase readout, and therefore increases the overall thermal noise. In the case of aLIGO, the BS contribution is with $0.3\%$ negligibly small. At a frequency of 500Hz, the BS causes about $10\%$ of GEO600's sensitivity limit. BS noise impairs the feasible sensitivity of the GEO-HF design proposal by about $50\%$.
△ Less
Submitted 28 September, 2018;
originally announced September 2018.
-
Thermal noise in complex systems
Authors:
Rene Glaser,
Klara T. Knupfer,
Lukas Maczewsky,
Max Mäusezahl,
Ronny Nawrodt,
Garrett D. Cole,
Johannes Dickmann,
Stefanie Kroker
Abstract:
We present a method to calculate the power spectral density of Brownian noise in complex optomechanical systems using Levin's approach of virtual pressure and present first mechanical loss measurements for high-purity GaAs over a wide temperature range from 7 K to 250 K. The loss reveals three Debye loss peaks. Each peak corresponds to an Arrhenius-like relaxation process with activation energies…
▽ More
We present a method to calculate the power spectral density of Brownian noise in complex optomechanical systems using Levin's approach of virtual pressure and present first mechanical loss measurements for high-purity GaAs over a wide temperature range from 7 K to 250 K. The loss reveals three Debye loss peaks. Each peak corresponds to an Arrhenius-like relaxation process with activation energies of 17.9 meV, 65.4 meV and 123 meV respectively. Additional light induced dam** was observed for photon energies below and above the fundamental gap of GaAs in contrast to observations by Okamoto et al.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
Brownian Thermal Noise in Functional Optical Surfaces
Authors:
S. Kroker,
J. Dickmann,
C. B. Rojas Hurtado,
D. Heinert,
R. Nawrodt,
Y. Levin,
S. P. Vyatchanin
Abstract:
We present a formalism to compute Brownian thermal noise in functional optical surfaces such as grating reflectors, photonic crystal slabs or complex metamaterials. Such computations are based on a specific readout variable, typically a surface integral of a dielectric interface displacement weighed by a form factor. This paper shows how to relate this form factor to Maxwell's stress tensor comput…
▽ More
We present a formalism to compute Brownian thermal noise in functional optical surfaces such as grating reflectors, photonic crystal slabs or complex metamaterials. Such computations are based on a specific readout variable, typically a surface integral of a dielectric interface displacement weighed by a form factor. This paper shows how to relate this form factor to Maxwell's stress tensor computed on all interfaces of the moving surface. As an example, we examine Brownian thermal noise in monolithic T-shape grating reflectors. The previous computations by Heinert et al. [Heinert et al., PRD 88 (2013)] utilizing a simplified readout form factor produced estimates of thermal noise that are tens of percent higher than those of the exact analysis in the present paper. The relation between the form factor and Maxwell's stress tensor implies a close correlation between the optical properties of functional optical surfaces and thermal noise.
△ Less
Submitted 29 April, 2017;
originally announced May 2017.