Showing 1–8 of 8 results for author: Di Stasio, F

Plasmon-enhanced circular dichroism spectroscopy of chiral drug solutions

Authors: Matteo Venturi, Raju Adhikary, Ambaresh Sahoo, Carino Ferrante, Isabella Daidone, Francesco Di Stasio, Andrea Toma, Francesco Tani, Hatice Altug, Antonio Mecozzi, Massimiliano Aschi, Andrea Marini

Abstract: We investigate the potential of surface plasmon polaritons at noble metal interfaces for surface-enhanced chiroptical sensing of dilute chiral drug solutions. The high quality factor of surface plasmon resonances in both Otto and Kretschmann configurations enables the enhancement of circular dichroism differenatial absorption thanks to the large near-field intensity of such plasmonic excitations.… ▽ More We investigate the potential of surface plasmon polaritons at noble metal interfaces for surface-enhanced chiroptical sensing of dilute chiral drug solutions. The high quality factor of surface plasmon resonances in both Otto and Kretschmann configurations enables the enhancement of circular dichroism differenatial absorption thanks to the large near-field intensity of such plasmonic excitations. Furthermore, the subwavelength confinement of surface plasmon polaritons is key to attain chiroptical sensitivity to small amounts of drug volumes placed around $\simeq 100$ nm by the metal surface. Our calculations focus on reparixin, a pharmaceutical molecule currently used in clinical studies for patients with community-acquired pneumonia, including COVID-19 and acute respiratory distress syndrome. Considering realistic dilute solutions of reparixin dissolved in water with concentration $\leq 5$ mg$/$ml, we find a circular-dichroism differential absorption enhancement factor of the order $\simeq 20$ and chirality-induced polarization distortion upon surface plasmon polariton excitation. △ Less

Submitted 27 September, 2023; v1 submitted 16 August, 2023; originally announced August 2023.

Enhancing the Performance of CdSe/CdS Dot-in- Rod Light Emitting Diodes via Surface Ligand Modification

Authors: Prachi Rastogi, Francisco Palazon, Mirko Prato, Francesco Di Stasio, Roman Krahne

Abstract: The surface ligands on colloidal nanocrystals (NCs) play an important role in the performance of NCs based optoelectronic devices such as photovoltaic cells, photodetectors and light emitting diodes (LEDs). On one hand, the NC emission depends critically on the passivation of the surface to minimize trap states that can provide non-radiative recombination channels. On the other hand, the electrica… ▽ More The surface ligands on colloidal nanocrystals (NCs) play an important role in the performance of NCs based optoelectronic devices such as photovoltaic cells, photodetectors and light emitting diodes (LEDs). On one hand, the NC emission depends critically on the passivation of the surface to minimize trap states that can provide non-radiative recombination channels. On the other hand, the electrical properties of NC films are dominated by the ligands that constitute the barriers for charge transport from one NC to its neighbor. Therefore, surface modifications via ligandexchange have been employed to improve the conductance of NC films. However, in light emitting devices, such surface modifications are more critical due to their possible detrimental effects on the emission properties. In this work, we study the role of surface ligand modifications on the optical and electrical properties of CdSe/CdS dot-in-rods (DiRs) in films, and investigate their performance in all-solution processed LEDs. The DiR films maintain high PLQY, around 40-50%, and their electroluminescence in the LED preserves the excellent color purity of the PL. In the LEDs, the ligand-exchange boosted the luminance, reaching a four-fold increase from 2200 cd/m2 for native surfactants to 8500 cd/m2 for the exchanged aminoethanethiol ligands. Moreover, the efficiency roll-off, operational stability, and shelf life are significantly improved, and the external quantum efficiency is modestly increased from 5.1 % to 5.4 %. We relate these improvements to the increased conductivity of the emissive layer, and to the better charge balance of the electrically injected carriers. In this respect, we performed ultraviolet photoelectron spectroscopy (UPS) to obtain deeper insight in the band alignment of the LED structure. △ Less

Submitted 24 April, 2020; originally announced April 2020.

Comments: 26 pages, 4 figures

Journal ref: ACS Appl. Mater. Interfaces 2018

Core/Shell CdSe/CdS Bone-Shaped Nanocrystals with a Thick and Anisotropic Shell as Optical Emitters

Authors: Andrea Castelli, Balaji Dhanabalan, Anatolii Polovitsyn, Vincenzo Caligiuri, Francesco Di Stasio, Alice Scarpellini, Rosaria Brescia, Milan Palei, Beatriz Martin-Garcia, Mirko Prato, Liberato Manna, Iwan Moreels, Roman Krahne, Milena P. Arciniegas

Abstract: Colloidal core/shell nanocrystals are key materials for optoelectronics, enabling control over essential properties via precise engineering of the shape, thickness, and crystal lattice structure of their shell. Here, we apply the growth protocol for CdS branched nanocrystals on CdSe nanoplatelet seeds and obtain bone-shaped heterostructures with a highly anisotropic shell. Surprisingly, the nanopl… ▽ More Colloidal core/shell nanocrystals are key materials for optoelectronics, enabling control over essential properties via precise engineering of the shape, thickness, and crystal lattice structure of their shell. Here, we apply the growth protocol for CdS branched nanocrystals on CdSe nanoplatelet seeds and obtain bone-shaped heterostructures with a highly anisotropic shell. Surprisingly, the nanoplatelets withstand the high growth temperature of 350 °C and we obtain structures with a CdSe nanoplatelet core that is overcoated by a shell of cubic CdS, on top of which tetrahedral CdS structures with hexagonal lattice are formed. These complex core/shell nanocrystals show a bandedge emission around 657 nm with a photoluminescence quantum yield of ca. 42 % in solution, which is also retained in thin films. Interestingly, the nanocrystals manifest simultaneous red and green emission, and the relatively long wavelength of the green emission indicates charge recombination at the cubic/hexagonal interface of the CdS shell. The nanocrystal films show amplified spontaneous emission, random lasing, and distributed feedback lasing when the material is deposited on suitable gratings. Our work stimulates the design and fabrication of more exotic core/shell heterostructures where charge carrier delocalization, dipole moment, and other optical and electrical properties can be engineered. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Comments: 26 pages, 6 figures, 1 table

Journal ref: wiley on line library 2019

High-Efficiency Light-Emitting Diodes based on Formamidinium lead bromide nanocrystals and solution processed transport layers

Authors: Francesco Di Stasio, Inigo Ramiro, Yu Bi, Sotirios Christodoulou, Alexandros Stavrinadis, Gerasimos Konstantatos

Abstract: Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and brightness have be… ▽ More Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and brightness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrica-tion. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evapo-ration in ultra-high-vacuum. △ Less

Submitted 29 January, 2019; originally announced January 2019.

High Open Circuit voltage solar cells based on bright mixed halide CsPbBrI2 perovskite nanocrystals synthesized under ambient air conditions

Authors: Sotirios Christodoulou, Francesco Di Stasio, Santanu Pradhan, Alexandros Stavrinadis, Gerasimos Konstantatos

Abstract: Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient condi… ▽ More Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material. △ Less

Submitted 29 January, 2019; originally announced January 2019.

Multirate 5G Downlink Performance Comparison for f-OFDM and w-OFDM Schemes with Different Numerologies

Authors: Francesco Di Stasio, Marina Mondin, Fred Daneshgaran

Abstract: One of the main open problems for next generation wireless networks, is to find the new OFDM-based waveform to be used in 5G. The new modulation scheme must primarily be able to achieve higher spectral efficiency than its predecessor. The main 3GPP's candidate is a new version of OFDM, called Filtered Orthogonal Frequency-Division Multiplexing (f-OFDM), which is similar to OFDM but with additional… ▽ More One of the main open problems for next generation wireless networks, is to find the new OFDM-based waveform to be used in 5G. The new modulation scheme must primarily be able to achieve higher spectral efficiency than its predecessor. The main 3GPP's candidate is a new version of OFDM, called Filtered Orthogonal Frequency-Division Multiplexing (f-OFDM), which is similar to OFDM but with additional filtering in order to reduce Out-Of-Band (OOB) emissions and to obtain a better spectral-localization. Another option is windowed-OFDM (w-OFDM), which is basically a classical OFDM scheme where each symbol is windowed and overlapped in the time domain. In this paper we compare classic OFDM signals using Cyclic Prefix (CP-OFDM) with f-OFDM and w-OFDM, each one with multiple parametric options and numerologies. A multirate transmitter simultaneously operating with multiple numerologies is considered, where the transmitted sub-bands must be up-sampled and interpolated in order to generate the composite numerical signal fed to the Digital to Analog Converter (DAC). Finally, we discuss advantages and disadvantages of the various schemes. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: Paper accepted for ISNCC 2018

Single-mode lasing from colloidal water-soluble CdSe/CdS quantum dot-in-rods

Authors: Francesco Di Stasio, Joel Q Grim, Vladimir Lesnyak, Prachi Rastogi, Liberato Manna, Iwan Moreels, Roman Krahne

Abstract: Core-shell CdSe/CdS nanocrystals are a very promising material for light emitting applications. Their solution-phase synthesis is based on surface-stabilizing ligands that makes them soluble in organic solvents, like toluene or chloroform. However, solubility of these materials in water provides many advantages, such as additional process routes and easier handling. So far, solubilization of CdSe/… ▽ More Core-shell CdSe/CdS nanocrystals are a very promising material for light emitting applications. Their solution-phase synthesis is based on surface-stabilizing ligands that makes them soluble in organic solvents, like toluene or chloroform. However, solubility of these materials in water provides many advantages, such as additional process routes and easier handling. So far, solubilization of CdSe/CdS nanocrystals in water that avoids detrimental effects on the luminescent properties, poses a major challenge. This work demonstrates how core-shell CdSe/CdS quantum dot-in-rods can be transferred into water using a ligand exchange method employing mercaptopropionic acid (MPA). Key to maintaining the light-emitting properties is an enlarged CdS rod diameter, which prevents potential surface defects formed during the ligand exchange from affecting the photophysics of the dot-in-rods. Films made from water-soluble dot-in-rods show amplified spontaneous emission (ASE) with a similar threshold (130 microJ/cm2) as the pristine material (115 microJ/cm2). To demonstrate feasibility for lasing applications, self-assembled micro lasers are fabricated via the coffee-ring effect that display single-mode operation and a very low threshold of around 10 microJ/cm2. The performance of these micro lasers is enhanced by the small size of MPA ligands, enabling a high packing density of the dot-in-rods. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Comments: 20 pages, 4 figures, published paper with supporting information

Journal ref: Small 11, 1328, 2015

Colloidal Synthesis of Strongly Fluorescent CsPbBr3 Nanowires with Width Tunable down to the Quantum Confinement Regime

Authors: Muhammad Imran, Francesco Di Stasio, Zhiya Dang, Claudio Canale, Ali Hossain Khan, Javad Shamsi, Rosaria Brescia, Mirko Prato, Liberato Manna

Abstract: We report the colloidal synthesis of strongly fluorescent CsPbBr3 perovskite nanowires (NWs) with rectangular section and with tuneable width, from 20 nm (exhibiting no quantum confinement, hence emitting in the green) down to around 3 nm (in the strong quan-tum-confinement regime, emitting in the blue), by introducing in the synthesis a short acid (octanoic acid or hexanoic acid) together with al… ▽ More We report the colloidal synthesis of strongly fluorescent CsPbBr3 perovskite nanowires (NWs) with rectangular section and with tuneable width, from 20 nm (exhibiting no quantum confinement, hence emitting in the green) down to around 3 nm (in the strong quan-tum-confinement regime, emitting in the blue), by introducing in the synthesis a short acid (octanoic acid or hexanoic acid) together with alkyl amines (octylamine and oleylamine). Temperatures below 70 °C promoted the formation of monodisperse, few unit cell thick NWs that were free from byproducts. The photoluminescence quantum yield of the NW samples went from 12% for non-confined NWs emitting at 524 nm to a maximum of 77% for the 5 nm diameter NWs emitting at 497 nm, down to 30% for the thinnest NWs (diameter ~ 3nm), in the latter sample most likely due to aggregation occurring in solution. △ Less

Submitted 25 October, 2016; originally announced October 2016.

Comments: 5 pages, 4 figures

Journal ref: Chemistry of Materials 2016