-
Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers
Authors:
Claudio Guarcello,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Angelo Leo,
Danilo Labranca,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providin…
▽ More
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation-effects that are not easily accommodated by simplistic linearized approaches
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Search for Axion dark matter with the QUAX-LNF tunable haloscope
Authors:
A. Rettaroli,
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
D. D'Agostino,
A. D'Elia,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
A. Gardikiotis,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
G. Ruoso,
S. Tocci,
G. Vidali
Abstract:
We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprob…
▽ More
We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprobed mass range between 36.52413 and 36.5511 $μ$eV. We don't observe any excess in the power spectrum and set limits on the axion-photon coupling in this mass range down to $g_{aγγ} < 0.861 \times 10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$.
△ Less
Submitted 15 May, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Development of KI-TWPAs for the DARTWARS project
Authors:
Felix Ahrens,
Elena Ferri,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Claudio Guarcello,
Danilo Labranca,
Angelo Leo,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit…
▽ More
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Broadband parametric amplification in DARTWARS
Authors:
Marco Faverzani,
Pietro Campana,
Rodolfo Carobene,
Marco Gobbo,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Silvia Capelli,
Giovanni Carapella,
Anna Paola Caricato,
Luca Callegaro,
Iacopo Carusotto,
Andrea Celotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Damiano Giubertoni,
Veronica Granata
, et al. (24 additional authors not shown)
Abstract:
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (T…
▽ More
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Characterization of a Transmon Qubit in a 3D Cavity for Quantum Machine Learning and Photon Counting
Authors:
Alessandro D'Elia,
Boulos Alfakes,
Anas Alkhazaleh,
Leonardo Banchi,
Matteo Beretta,
Stefano Carrazza,
Fabio Chiarello,
Daniele Di Gioacchino,
Andrea Giachero,
Felix Henrich,
Alex Stephane Piedjou Komnang,
Carlo Ligi,
Giovanni Maccarrone,
Massimo Macucci,
Emanuele Palumbo,
Andrea Pasquale,
Luca Piersanti,
Florent Ravaux,
Alessio Rettaroli,
Matteo Robbiati,
Simone Tocci,
Claudio Gatti
Abstract:
In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and th…
▽ More
In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on the single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favouring applications like axion dark matter searches.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Design and simulation of a transmon qubit chip for Axion detection
Authors:
Roberto Moretti,
Hervè Atsè Corti,
Danilo Labranca,
Felix Ahrens,
Guerino Avallone,
Danilo Babusci,
Leonardo Banchi,
Carlo Barone,
Matteo Mario Beretta,
Matteo Borghesi,
Bruno Buonomo,
Enrico Calore,
Giovanni Carapella,
Fabio Chiarello,
Alessandro Cian,
Alessando Cidronali,
Filippo Costa,
Alessandro Cuccoli,
Alessandro D'Elia,
Daniele Di Gioacchino,
Stefano Di Pascoli,
Paolo Falferi,
Marco Fanciulli,
Marco Faverzani,
Giulietto Felici
, et al. (32 additional authors not shown)
Abstract:
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity im…
▽ More
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.
△ Less
Submitted 25 January, 2024; v1 submitted 8 October, 2023;
originally announced October 2023.
-
The future search for low-frequency axions and new physics with the FLASH resonant cavity experiment at Frascati National Laboratories
Authors:
David Alesini,
Danilo Babusci,
Paolo Beltrame,
Fabio Bossi,
Paolo Ciambrone,
Alessandro D'Elia,
Daniele Di Gioacchino,
Giampiero Di Pirro,
Babette Döbrich,
Paolo Falferi,
Claudio Gatti,
Maurizio Giannotti,
Paola Gianotti,
Gianluca Lamanna,
Carlo Ligi,
Giovanni Maccarrone,
Giovanni Mazzitelli,
Alessandro Mirizzi,
Michael Mueck,
Enrico Nardi,
Federico Nguyen,
Alessio Rettaroli,
Javad Rezvani,
Francesco Enrico Teofilo,
Simone Tocci
, et al. (3 additional authors not shown)
Abstract:
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as…
▽ More
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as the DM in the mass range (0.49-1.49) ueV, thus filling the mass gap between the ranges covered by other planned searches. A dedicated Microstrip SQUID operating at ultra-cryogenic temperatures will amplify the signal. The frequency range accessible overlaps with the Very High Frequency (VHF) range of the radio wave spectrum and allows for a search in GWs in the frequency range (100-300) MHz. The experiment will make use of the cryogenic plant and magnet of the FINUDA experiment at INFN Frascati National Laboratories near Rome (Italy); the operations needed to restore the functionalities of the apparatus are currently underway. We present the setup of the experiment and the sensitivity forecasts for the detection of axions, scalar fields, chameleons, hidden photons, and GWs.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Search for galactic axions with a traveling wave parametric amplifier
Authors:
R. Di Vora,
A. Lombardi,
A. Ortolan,
R. Pengo,
G. Ruoso,
C. Braggio,
G. Carugno,
L. Taffarello,
G. Cappelli,
N. Crescini,
M. Esposito,
L. Planat,
A. Ranadive,
N. Roch,
D. Alesini,
D. Babusci,
A. D'Elia,
D. Di Gioacchino,
C. Gatti,
C. Ligi,
G. Maccarrone,
A. Rettaroli,
S. Tocci,
D. D'Agostino,
U. Gambardella
, et al. (2 additional authors not shown)
Abstract:
A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire…
▽ More
A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire rods immersed into the cavity. At multiple operating frequencies, the sensitivity of the instrument was at the level of viable axion models.
△ Less
Submitted 15 April, 2023;
originally announced April 2023.
-
Step** closer to pulsed single microwave photon detectors for axions search
Authors:
A. D'Elia,
A. Rettaroli,
S. Tocci,
D. Babusci,
C. Barone,
M. Beretta,
B. Buonomo,
F. Chiarello,
N. Chikhi,
D. Di Gioacchino,
G. Felici,
G. Filatrella,
M. Fistul,
L. G. Foggetta,
C. Gatti,
E. Il'ichev,
C. Ligi,
M. Lisitskiy,
G. Maccarrone,
F. Mattioli,
G. Oelsner,
S. Pagano,
L. Piersanti,
B. Ruggiero,
G. Torrioli
, et al. (1 additional authors not shown)
Abstract:
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches t…
▽ More
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches that both rely on the use of superconducting devices based on the Josephson effect. The first one is to use a single Josephson junction (JJ) as a switching detector (i.e. exploiting the superconducting to normal state transition in presence of microwave photons). We designed a device composed of a coplanar waveguide terminated on a current biased Josephson junction. We tested its efficiency to pulsed (pulse duration 10 ns) microwave signals, since this configuration is closer to an actual axions search experiment. We show how our device is able to reach detection capability of the order of 10 photons with frequency 8 GHz. The second approach is based on an intrinsically quantum device formed by two resonators coupled only via a superconducting qubit network (SQN). This approach relies on quantum nondemolition measurements of the resonator photons. We show that injecting RF power into the resonator, the frequency position of the resonant drop in the transmission coefficient (S21) can be modulated up to 4 MHz. We anticipate that, once optimized, both the devices have the potential to reach single photon sensitivity.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Search for galactic axions with a high-Q dielectric cavity
Authors:
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
N. Crescini,
D. DAgostino,
A. D'Elia,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements…
▽ More
A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements in presence of magnetic field. Through the cavity tuning mechanism it was possible to modulate the resonance frequency of the haloscope in the region $10.35337-10.35345$~GHz and thus acquire different dataset at different resonance frequencies. Acquiring each dataset for about 50 minutes, combining them and correcting for the axion's signal estimation-efficiency we set a limit on the axion-photon coupling $g_{aγγ}< 0.731\times10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Progress in the development of a KITWPA for the DARTWARS project
Authors:
M. Borghesi,
C. Barone,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone,
F. Mantegazzini
, et al. (16 additional authors not shown)
Abstract:
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic induc…
▽ More
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.
△ Less
Submitted 27 October, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project
Authors:
A. Rettaroli,
C. Barone,
M. Borghesi,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone
, et al. (16 additional authors not shown)
Abstract:
The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junction…
▽ More
The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
A high-Q microwave dielectric resonator for axion dark matter haloscopes
Authors:
R. Di Vora,
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D Agostino,
D. Di Gioacchino,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role.
We report a 3D resonator based on a right circular copper cavity with hollo…
▽ More
The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role.
We report a 3D resonator based on a right circular copper cavity with hollow cylinders that confine higher order modes around the cylinder axis. Its effective volume at 10.3\,GHz is $3.4 \cdot 10^{-2}$ liters, and under an 8\,T-field we measured an internal quality factor of more than 9 millions. These parameters demonstrate the potential of this unique resonator to probe galactic dark matter axion at remarkable scan rates of 15\,MHz/day when the cavity is readout by a quantum-limited receiver.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Impact of the superconductors properties on the measurement sensitivity of resonant-based axion detectors
Authors:
Andrea Alimenti,
Kostiantyn Torokhtii,
Daniele Di Gioacchino,
Claudio Gatti,
Enrico Silva,
Nicola Pompeo
Abstract:
Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of resonant-based axion detectors, known as haloscopes, is directly proportional to their quality factor $Q$. In this paper, the impact of the use of superconductors in the performances of the haloscopes is studied by evalua…
▽ More
Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of resonant-based axion detectors, known as haloscopes, is directly proportional to their quality factor $Q$. In this paper, the impact of the use of superconductors in the performances of the haloscopes is studied by evaluating the obtainable $Q$. In particular, the surface resistance $R_s$ of NbTi, Nb$_3$Sn, YBa$_2$Cu$_3$O$_{7-δ}$ and FeSe$_{0.5}$Te$_{0.5}$ is computed in the frequency, magnetic field and temperature ranges of interest, starting from the measured vortex motion complex resistivity and screening lengths of these materials. From $R_s$ the quality factor $Q$ of a cylindrical haloscope with copper conical bases and superconductive lateral wall, operating with the TM$_{010}$ mode, is evaluated and used to perform a comparison of the performances of the different materials. Both YBa$_2$Cu$_3$O$_{7-δ}$ and FeSe$_{0.5}$Te$_{0.5}$ are shown to improve the measurement sensitivity by almost an order of magnitude with respect to a whole Cu cavity, while NbTi is shown to be suitable only at lower frequencies (<10 GHz). Nb$_3$Sn can give an intermediate improvement in the whole spectrum of interest.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Detector Array Readout with Traveling Wave Amplifiers
Authors:
A. Giachero,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chang,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
G. Maccarrone,
B. Margesin,
G. Maruccio,
A. Matlashov
, et al. (13 additional authors not shown)
Abstract:
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter dete…
▽ More
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of develo** high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Bimodal Approach for Noise Figures of Merit Evaluation in Quantum-Limited Josephson Traveling Wave Parametric Amplifiers
Authors:
L. Fasolo,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chung,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
P. Livreri,
G. Maccarrone,
B. Margesin,
G. Maruccio
, et al. (15 additional authors not shown)
Abstract:
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplificatio…
▽ More
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplification and noise generation for key case study input states (Fock and coherents). Furthermore, we present an analysis of the output signals generated by the parametric amplification mechanism when thermal noise fluctuations feed the device.
△ Less
Submitted 29 December, 2021; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Development of a Josephson junction based single photon microwave detector for axion detection experiments
Authors:
D Alesini,
D Babusci,
C Barone,
B Buonomo,
M M Beretta,
L Bianchini,
G Castellano,
F Chiarello,
D Di Gioacchino,
P Falferi,
G Felici,
G Filatrella,
L G Foggetta,
A Gallo,
C Gatti,
F Giazotto,
G Lamanna,
F Ligabue,
N Ligato,
C Ligi,
G Maccarrone,
B Margesin,
F Mattioli,
E Monticone,
L Oberto
, et al. (8 additional authors not shown)
Abstract:
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson…
▽ More
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Status of the SIMP Project: Toward the Single Microwave Photon Detection
Authors:
David Alesini,
Danilo Babusci,
Carlo Barone,
Bruno Buonomo,
Matteo Mario Beretta,
Lorenzo Bianchini,
Gabriella Castellano,
Fabio Chiarello,
Daniele Di Gioacchino,
Paolo Falferi,
Giulietto Felici,
Giovanni Filatrella,
Luca Gennaro Foggetta,
Alessandro Gallo,
Claudio Gatti,
Francesco Giazotto,
Gianluca Lamanna,
Franco Ligabue,
Nadia Ligato,
Carlo Ligi,
Giovanni Maccarrone,
Benno Margesin,
Francesco Mattioli,
Eugenio Monticone,
Luca Oberto
, et al. (8 additional authors not shown)
Abstract:
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for th…
▽ More
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Search for invisible axion dark matter of mass m$_a=43~μ$eV with the QUAX--$aγ$ experiment
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With…
▽ More
A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With the data collected in about 1 h at the cavity frequency $ν_c=10.40176$ GHz, the experiment reaches the sensitivity necessary for the detection of galactic QCD-axion, setting the $90\%$ confidence level limit to the axion-photon coupling $g_{aγγ}<0.639\times10^{-13}$ GeV$^{-1}$.
△ Less
Submitted 26 May, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
A cryogenic magneto-optical device for long wavelength radiation
Authors:
S. J. Rezvani,
D. Di Gioacchino,
S. Tofani,
A. Darco,
C. Ligi,
S. Lupi,
C. Gatti,
M. Cestelli Guidi,
A. Marcelli
Abstract:
We present here a small-scale liquid Helium (LHe) immersion cryostat with an innovative optical setup suitable to work in long wavelength radiation ranges and under applied magnetic field. The cryostat is a multi stage device with several shielding in addition to several optical stages. The system has been designed with an external liquid Nitrogen boiler to reduce the liquid bubbling. The optical…
▽ More
We present here a small-scale liquid Helium (LHe) immersion cryostat with an innovative optical setup suitable to work in long wavelength radiation ranges and under applied magnetic field. The cryostat is a multi stage device with several shielding in addition to several optical stages. The system has been designed with an external liquid Nitrogen boiler to reduce the liquid bubbling. The optical and mechanical properties of the optical elements were calculated and optimized for the designed configuration while the optical layout has been simulated and optimized among different configurations based on the geometry of the device. The final design has been optimized for low noise radiation measurements of proximity junction arrays under applied magnetic field in the wavelength range $λ$=250-2500 $μ$m.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Realization of a high quality factor resonator with hollow dielectric cylinders for axion searches
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D' Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
C. Pira,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding…
▽ More
The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding to a gain of one order of magnitude with respect to a traditional copper cylindrical-cavity with the corresponding TM$_{010}$ mode resonating at the same frequency. The implications to dark-matter axion-searches with cavity experiments are discussed showing that the gain in quality factor is not spoiled by a reduced geometrical coupling $C_{030}$ of the cavity mode to the axion field. This reduction effect is estimated to be at most 20%. Numerical simulations show that frequency tuning of several hundreds MHz is feasible.
△ Less
Submitted 28 September, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
High quality factor photonic cavity for dark matter axion searches
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
C. Pira,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic stru…
▽ More
Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of $5 \times 10^5$ for a selected mode.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Axion search with a quantum-limited ferromagnetic haloscope
Authors:
N. Crescini,
D. Alesini,
C. Braggio,
G. Carugno,
D. D Agostino,
D. Di Gioacchino,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
A. Ortolan,
R. Pengo,
G. Ruoso,
L. Taffarello
Abstract:
A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diam…
▽ More
A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diameter YIG spheres coupled to a single microwave cavity mode by means of a static magnetic field. Our setup is the most sensitive rf spin-magnetometer ever realized. The minimum detectable field is $5.5\times10^{-19}\,$T with 9 h integration time, corresponding to a limit on the axion-electron coupling constant $g_{aee}\le1.7\times10^{-11}$ at 95% CL. The scientific run of our haloscope resulted in the best limit on DM-axions to electron coupling constant in a frequency span of about 120 MHz, corresponding to the axion mass range $42.4$-$43.1\,μ$eV. This is also the first apparatus to perform an axion mass scanning by changing the static magnetic field.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Tunable vortex dynamics in proximity junction arrays: a possible accurate and sensitive 2D THz detector
Authors:
J. Rezvani,
D. Di Gioacchino,
C. Gatti,
N. Poccia,
C. Ligi,
S. Tocci,
M. Cestelli Guidi,
S. Cibella,
S. Lupi,
A. Marcelli
Abstract:
An array of superconducting proximity islands has been shown to be highly tunable by electric and magnetic fields. Indeed, a small change in the electric and magnetic field can tune the system from a vortex Mott insulator to a vortex metal. This transition from localized to a non-localized state can occur as soon as the density of the superconducting vortices matches the density of the pinning sit…
▽ More
An array of superconducting proximity islands has been shown to be highly tunable by electric and magnetic fields. Indeed, a small change in the electric and magnetic field can tune the system from a vortex Mott insulator to a vortex metal. This transition from localized to a non-localized state can occur as soon as the density of the superconducting vortices matches the density of the pinning sites in a non defective structure. The possibility of further modulation of non-localized superconducting states via enhancement of the superconducting order parameter or modulation of the Josephson plasma frequency is discussed. Based on the non-bolometric effects associated with the occurrence of non-equilibrium phenomena in this original superconducting networks we discuss also the possible applications of this array for a conceptually new type of radiation detector.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
KLASH Conceptual Design Report
Authors:
D. Alesini,
D. Babusci,
P. Beltrame S. J.,
F. Björkeroth,
F. Bossi,
P. Ciambrone,
G. Delle Monache,
D. Di Gioacchino,
P. Falferi,
A. Gallo,
C. Gatti,
A. Ghigo,
M. Giannotti,
G. Lamanna,
C. Ligi,
G. Maccarrone,
A. Mirizzi,
D. Montanino,
D. Moricciani,
A. Mostacci,
M. Mück,
E. Nardi,
F. Nguyen,
L. Pellegrino,
A. Rettaroli
, et al. (4 additional authors not shown)
Abstract:
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated…
▽ More
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Galactic axions search with a superconducting resonant cavity
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
R. Mezzena,
A. Ortolan,
R. Pengo,
N. Pompeo,
A. Rettaroli,
G. Ruoso,
E. Silva,
C. C. Speake,
L. Taffarello,
S. Tocci
Abstract:
To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of…
▽ More
To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of Cu resonant cavities. In this paper we deal with the last issue, presenting the result of a search for galactic axions using a haloscope based on a $36\,\mbox{cm}^3$ NbTi superconducting cavity. The cavity worked at $T=4\,\mbox{K}$ in a 2\,T magnetic field and exhibited a quality factor $Q_0= 4.5\times10^5$ for the TM010 mode at 9\,GHz. With such values of $Q$ the axion signal is significantly increased with respect to copper cavity haloscopes. Operating this setup we set the limit $g_{aγγ}<1.03\times10^{-12}\,\mbox{GeV}^{-1}$ on the axion photon coupling for a mass of about 37\,$μ$eV. A comprehensive study of the NbTi cavity at different magnetic fields, temperatures, and frequencies is also presented.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
The Klash Proposal: Status and Perspectives
Authors:
C. Gatti,
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
N. Crescini,
D. Di Gioacchino,
P. Falferi,
G. Lamanna,
C. Ligi,
A. Ortolan,
L. Pellegrino,
A. Rettaroli,
G. Ruoso,
S. Tocci
Abstract:
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion Sear…
▽ More
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{aγγ}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Operation of a ferromagnetic axion haloscope at $m_a=58\,μ$eV
Authors:
N. Crescini,
D. Alesini,
C. Braggio,
G. Carugno,
D. Di Gioacchino,
C. S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
A. Ortolan,
S. Pagano,
R. Pengo,
G. Ruoso,
C. C. Speake,
L. Taffarello
Abstract:
Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with e…
▽ More
Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with electronic spins in a magnetized sample. In principle, axion-induced magnetization changes can be detected by embedding a sample in an rf cavity in a static magnetic field. In this work we describe the operation of a prototype ferromagnetic haloscope, with a sensitivity limited by thermal fluctuations and receiver noise. With a preliminary dark matter search, we are able to set an upper limit on the coupling constant of DFSZ axions to electrons $g_{aee}<4.9\times10^{-10}$ at 95\% C.L. for a mass of $58\,μ$eV (i.\,e. 14\,GHz). This is the first experimental result with an apparatus exploiting the coupling between cosmological axions and electrons.
△ Less
Submitted 31 August, 2018; v1 submitted 1 June, 2018;
originally announced June 2018.
-
Searching for galactic axions through magnetized media: QUAX status report
Authors:
G. Ruoso,
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. Di Gioacchino,
P. Falferi,
S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
R. Mezzena,
A. Ortolan,
R. Pengo,
C. C. Speake
Abstract:
The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field.
The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
The KLASH Proposal
Authors:
David Alesini,
Danilo Babusci,
Daniele Di Gioacchino,
Claudio Gatti,
Gianluca Lamanna,
Carlo Ligi
Abstract:
We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the followin…
▽ More
We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the following, has a potential sensitivity on the axion-to-photon coupling, g_agg, of about 6x10^-17 GeV-1, reaching the region predicted by KSVZ and DFSZ models of QCD axions.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
The flux dynamics behavior of the two competing high temperature superconducting phases in underdoped LaCuO4.06
Authors:
D. Di Gioacchino,
A. Puri,
A. Marcelli,
N. Poccia,
A. Ricci,
A. Bianconi
Abstract:
In complex transition metal oxides (TMO) an arrested electronic phase separation (PS) appears by tuning the system near a Lifshitz transition in multiband Hubbard models. The PS in La2CuO4+y near insulator to metal transition (IMT) is made of short range Charge Density Wave (CDW) order inhomogeneity coexisting with quenched lattice disorder. While at high do** y=0.1 percolation gives a single su…
▽ More
In complex transition metal oxides (TMO) an arrested electronic phase separation (PS) appears by tuning the system near a Lifshitz transition in multiband Hubbard models. The PS in La2CuO4+y near insulator to metal transition (IMT) is made of short range Charge Density Wave (CDW) order inhomogeneity coexisting with quenched lattice disorder. While at high do** y=0.1 percolation gives a single superconducting phase, near the IMT at y=0.06 two coexisting superconducting phases appear: the first one with a critical temperature Tc1=16 K and the second one with Tc2=29K. It is known that the two superconducting phases are characterized by two different space geometry because of two different spatial distributions of both CDW order and dopants self-organization. Here we show that these two phases show different flux dynamic regimes using alternating current (AC) multi-harmonic susceptibility experiments. This is a unique technique capable to investigate multi-phase superconductors and characterize their transport properties in a percolative scenario. Results point out that the low critical temperature phase is well described by a bulk-like flux pinning with a 2D geometry while the phase with higher critical temperature shows a barrier pinning mechanism providing direct evidence of two different superconducting vortex dynamics in different complex geometrical spaces.
△ Less
Submitted 19 April, 2016;
originally announced April 2016.
-
The AC multi-harmonic magnetic susceptibility measurement setup at the LNF-INFN
Authors:
Shenghao Wang,
Augusto Marcelli,
Daniele Di Gioacchino,
Ziyu Wu
Abstract:
The AC magnetic susceptibility is a fundamental method in materials science, which allows to probe the dynamic magnetic response of magnetic materials and superconductors. The LAMPS laboratory at the Laboratori Nazionali di Frascati of the INFN hosts an AC multi-harmonic magnetometer that allows performing experiments with an AC magnetic field ranging from 0.1 to 20 Gauss and in the frequency rang…
▽ More
The AC magnetic susceptibility is a fundamental method in materials science, which allows to probe the dynamic magnetic response of magnetic materials and superconductors. The LAMPS laboratory at the Laboratori Nazionali di Frascati of the INFN hosts an AC multi-harmonic magnetometer that allows performing experiments with an AC magnetic field ranging from 0.1 to 20 Gauss and in the frequency range from 17 to 2070 Hz. A DC magnetic field from 0 to 8 T produced by a superconducting magnet can be applied, while data may be collected in the temperature range 4.2-300 K using a liquid He cryostat under different temperature cycles setups. The first seven AC magnetic multi-harmonic susceptibility components can be measured with a magnetic sensitivity of 1x10-6 emu and a temperature precision of 0.01 K. Here we will describe in detail about schematic of the magnetometer, special attention will be dedicated to the instruments control, data acquisition framework and the user-friendly LabVIEW-based software platform.
△ Less
Submitted 29 April, 2014;
originally announced April 2014.
-
X-ray absorption spectroscopy characterization of iron-oxide nanoparticles synthesized by high temperature plasma processing
Authors:
C. Balasubramanian,
B. Joseph,
P. Gupta,
N. L. Saini,
S. Mukherjee,
D. Di Gioacchino,
A. Marcelli
Abstract:
Iron-oxide nanoparticles have been synthesized by high temperature arc plasma route with different plasma currents and characterized for their structure, morphology and local atomic order. Fe K-edge x-ray absorption spectra reveal distinct local structure of the samples grown with different plasma currents. We have shown that the local disorder is higher for the higher plasma current grown samples…
▽ More
Iron-oxide nanoparticles have been synthesized by high temperature arc plasma route with different plasma currents and characterized for their structure, morphology and local atomic order. Fe K-edge x-ray absorption spectra reveal distinct local structure of the samples grown with different plasma currents. We have shown that the local disorder is higher for the higher plasma current grown samples that also have a larger average particle-size. The results provide useful information to control structural and morphological properties of nanoparticles grown by high temperature plasma synthesis process.
△ Less
Submitted 15 January, 2014;
originally announced January 2014.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Optimum inhomogeneity of local lattice distortions in La2CuO4+y
Authors:
Nicola Poccia,
Alessandro Ricci,
Gaetano Campi,
Michela Fratini,
Alessandro Puri,
Daniele Di Gioacchino,
Augusto Marcelli,
Michael Reynolds,
Manfred Burghammer,
Naurang Lal Saini,
Gabriel Aeppli,
Antonio Bianconi
Abstract:
Electronic functionalities in materials from silicon to transition metal oxides are to a large extent controlled by defects and their relative arrangement. Outstanding examples are the oxides of copper, where defect order is correlated with their high superconducting transition temperatures. The oxygen defect order can be highly inhomogeneous, even in "optimal" superconducting samples, which raise…
▽ More
Electronic functionalities in materials from silicon to transition metal oxides are to a large extent controlled by defects and their relative arrangement. Outstanding examples are the oxides of copper, where defect order is correlated with their high superconducting transition temperatures. The oxygen defect order can be highly inhomogeneous, even in "optimal" superconducting samples, which raises the question of the nature of the sample regions where the order does not exist but which nonetheless form the "glue" binding the ordered regions together. Here we use scanning X-ray microdiffraction (with beam 300 nm in diameter) to show that for La2CuO4+y, the "glue" regions contain incommensurate modulated local lattice distortions, whose spatial extent is most pronounced for the best superconducting samples. For an underdoped single crystal with mobile oxygen interstitials in the spacer La2O2+y layers intercalated between the CuO2 layers, the incommensurate modulated local lattice distortions form droplets anticorrelated with the ordered oxygen interstitials, and whose spatial extent is most pronounced for the best superconducting samples. In this simplest of high temperature superconductors, there are therefore not one, but two networks of ordered defects which can be tuned to achieve optimal superconductivity. For a given stoichiometry, the highest transition temperature is obtained when both the ordered oxygen and lattice defects form fractal patterns, as opposed to appearing in isolated spots. We speculate that the relationship between material complexity and superconducting transition temperature Tc is actually underpinned by a fundamental relation between Tc and the distribution of ordered defect networks supported by the materials.
△ Less
Submitted 2 August, 2012; v1 submitted 1 August, 2012;
originally announced August 2012.
-
Flux dynamics in NdO1-xFxFeAs bulk sample
Authors:
D. Di Gioacchino,
A. Marcelli,
S. Zhang,
M. Fratini,
N. Poccia,
A. Ricci,
A. Bianconi
Abstract:
We present data of multi harmonic magneto-dynamic experiments. In particular, we performed ac magnetic susceptibility experiments on layered pnictide-oxide quaternary compound NdOFeAs doped with fluorine. The experiments allow measure the critical temperature and probe the flux dynamic behavior using the third harmonic component of the ac susceptibility of a NdF0.16FeAsO0.84 bulk sample as a fun…
▽ More
We present data of multi harmonic magneto-dynamic experiments. In particular, we performed ac magnetic susceptibility experiments on layered pnictide-oxide quaternary compound NdOFeAs doped with fluorine. The experiments allow measure the critical temperature and probe the flux dynamic behavior using the third harmonic component of the ac susceptibility of a NdF0.16FeAsO0.84 bulk sample as a function of temperature and frequency of the applied ac magnetic fields. Measured signals are connected with the non-linear superconducting flux dynamic behavior and are characterized by a flux critical states sustaining a superconducting critical current. In this framework the irreversibility line that describes the stable superconducting state has been extracted from the onset of the third harmonic signal vs. frequency. Finally we present also the analysis of the flux dynamic dimensionality in the investigated sample.
△ Less
Submitted 11 May, 2009;
originally announced May 2009.
-
Evidence for Irradiation Triggered Nonuniform Defect Distribution In Multiharmonic Magnetic Susceptibility of Neutron Irradiated YBa2Cu3O7-x
Authors:
V. Sandu,
S. Popa,
D. Di Gioacchino,
P. Tripodi
Abstract:
Multiharmonic ac-magnetic susceptibility \ch11,\chi2,chi3, of neutron irradiated Li-doped YBa2Cu3O7-x has revealed a nonmonotonic dependence of all harmonics on the neutron fluence. The irradiation has a strongly depressive influence on the intergrain connection suggesting an increase of the effective thickness of the intergranular Josephson junction at aneutron fluence of 0.98x10$^{17}$ cm…
▽ More
Multiharmonic ac-magnetic susceptibility \ch11,\chi2,chi3, of neutron irradiated Li-doped YBa2Cu3O7-x has revealed a nonmonotonic dependence of all harmonics on the neutron fluence. The irradiation has a strongly depressive influence on the intergrain connection suggesting an increase of the effective thickness of the intergranular Josephson junction at aneutron fluence of 0.98x10$^{17}$ cm$_{-2}$. Less damaged are the intragrain properties. A spectacular enhancement of the superconducting intragranular properties reflected in the characteristics of all harmonics was observed at highest fluence Φ= 9.98x10$^{17}$ cm$_{-2}$. We assume that this effect results from the development of a space inhomogeneous distribution with alternating defectless and defect rich regions.
△ Less
Submitted 9 June, 2005;
originally announced June 2005.
-
Particle acoustic detection in gravitational wave aluminum resonant antennas
Authors:
B. Buonomo,
E. Coccia,
S. D'Antonio,
G. Delle Monache,
D. Di Gioacchino,
V. Fafone,
C. Ligi,
A. Marini,
G. Mazzitelli,
G. Modestino,
S. Panella,
G. Pizzella,
L. Quintieri,
S. Roccella,
F. Ronga,
P. Tripodi,
P. Valente
Abstract:
The results on cosmic rays detected by the gravitational antenna NAUTILUS have motivated an experiment (RAP) based on a suspended cylindrical bar, which is made of the same aluminum alloy as NAUTILUS and is exposed to a high energy electron beam. Mechanical vibrations originate from the local thermal expansion caused by warming up due to the energy lost by particles crossing the material. The ai…
▽ More
The results on cosmic rays detected by the gravitational antenna NAUTILUS have motivated an experiment (RAP) based on a suspended cylindrical bar, which is made of the same aluminum alloy as NAUTILUS and is exposed to a high energy electron beam. Mechanical vibrations originate from the local thermal expansion caused by warming up due to the energy lost by particles crossing the material. The aim of the experiment is to measure the amplitude of the fundamental longitudinal vibration at different temperatures. We report on the results obtained down to a temperature of about 4 K, which agree at the level of about 10% with the predictions of the model describing the underlying physical process.
△ Less
Submitted 2 May, 2005;
originally announced May 2005.
