Showing 1–14 of 14 results for author: Devkota, S

GPT-4's assessment of its performance in a USMLE-based case study

Authors: Uttam Dhakal, Aniket Kumar Singh, Suman Devkota, Yogesh Sapkota, Bishal Lamichhane, Suprinsa Paudyal, Chandra Dhakal

Abstract: This study investigates GPT-4's assessment of its performance in healthcare applications. A simple prompting technique was used to prompt the LLM with questions taken from the United States Medical Licensing Examination (USMLE) questionnaire and it was tasked to evaluate its confidence score before posing the question and after asking the question. The questionnaire was categorized into two groups… ▽ More This study investigates GPT-4's assessment of its performance in healthcare applications. A simple prompting technique was used to prompt the LLM with questions taken from the United States Medical Licensing Examination (USMLE) questionnaire and it was tasked to evaluate its confidence score before posing the question and after asking the question. The questionnaire was categorized into two groups-questions with feedback (WF) and questions with no feedback(NF) post-question. The model was asked to provide absolute and relative confidence scores before and after each question. The experimental findings were analyzed using statistical tools to study the variability of confidence in WF and NF groups. Additionally, a sequential analysis was conducted to observe the performance variation for the WF and NF groups. Results indicate that feedback influences relative confidence but doesn't consistently increase or decrease it. Understanding the performance of LLM is paramount in exploring its utility in sensitive areas like healthcare. This study contributes to the ongoing discourse on the reliability of AI, particularly of LLMs like GPT-4, within healthcare, offering insights into how feedback mechanisms might be optimized to enhance AI-assisted medical education and decision support. △ Less

Submitted 26 March, 2024; v1 submitted 14 February, 2024; originally announced February 2024.

Efficient Neural Representation of Volumetric Data using Coordinate-Based Networks

Authors: Sudarshan Devkota, Sumanta Pattanaik

Abstract: In this paper, we propose an efficient approach for the compression and representation of volumetric data utilizing coordinate-based networks and multi-resolution hash encoding. Efficient compression of volumetric data is crucial for various applications, such as medical imaging and scientific simulations. Our approach enables effective compression by learning a map** between spatial coordinates… ▽ More In this paper, we propose an efficient approach for the compression and representation of volumetric data utilizing coordinate-based networks and multi-resolution hash encoding. Efficient compression of volumetric data is crucial for various applications, such as medical imaging and scientific simulations. Our approach enables effective compression by learning a map** between spatial coordinates and intensity values. We compare different encoding schemes and demonstrate the superiority of multi-resolution hash encoding in terms of compression quality and training efficiency. Furthermore, we leverage optimization-based meta-learning, specifically using the Reptile algorithm, to learn weight initialization for neural representations tailored to volumetric data, enabling faster convergence during optimization. Additionally, we compare our approach with state-of-the-art methods to showcase improved image quality and compression ratios. These findings highlight the potential of coordinate-based networks and multi-resolution hash encoding for an efficient and accurate representation of volumetric data, paving the way for advancements in large-scale data visualization and other applications. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Journal ref: Computer Graphics Forum (2023), 42: e14955

Harmonic content analysis of a soft starting variable frequency motor drive based on FPGA

Authors: Yogesh Sapkota, Suman Devkota, Vamsi Borra, Pedro Cortes, Frank Li, Srikanth Itapu

Abstract: As the demands for electric vehicles, electric aircrafts, unmanned aircraft systems, and other motor-driven systems increase, high-performance motor drives employing variable frequency control with higher efficiency and reliability are becoming increasingly important parts of the ever-changing technological landscape. This study proposes a Field Programmable Gate Array (FPGA)-based variable freque… ▽ More As the demands for electric vehicles, electric aircrafts, unmanned aircraft systems, and other motor-driven systems increase, high-performance motor drives employing variable frequency control with higher efficiency and reliability are becoming increasingly important parts of the ever-changing technological landscape. This study proposes a Field Programmable Gate Array (FPGA)-based variable frequency soft-starting motor drive for a three-phase induction motor. The inverter output voltage and the load currents are analyzed for the harmonic contents using MATLAB. In the experimental realization, a four-pole squirrel cage delta-connected induction motor is utilized with a switching frequency of 4 kHz. The current and voltage characteristics of the induction motor are studied under different operating conditions to study harmonic contents and the effect of changing soft-start duration. The findings demonstrate a low-cost, flexible control of the induction motor with improved harmonic performance. △ Less

Submitted 28 October, 2023; originally announced November 2023.

Comments: 10 figures

Journal ref: Sapkota, Yogesh, et al. "Harmonic content analysis of a soft starting variable frequency motor drive based on FPGA." 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET). IEEE, 2023

Threshold Switching in CdTe Photovoltaics

Authors: Suman Devkota, Kwame A Nyako, Brendan Kuzior, Victor G. Karpov, Daniel G. Georgiev, Frank X. Li, Pedro Cortes, Vamsi Borra

Abstract: With the ubiquitous acceptance of PVs, the number of devices manufactured annually is following an exponential trend. Yet, the manufacturing process of important brands of thin film solar cells involves a tedious and expensive step of laser scribing. The time-consuming and technologically involved laser scribing method remains widely used to contact the device electrodes. This work examines an alt… ▽ More With the ubiquitous acceptance of PVs, the number of devices manufactured annually is following an exponential trend. Yet, the manufacturing process of important brands of thin film solar cells involves a tedious and expensive step of laser scribing. The time-consuming and technologically involved laser scribing method remains widely used to contact the device electrodes. This work examines an alternative method (threshold switching phenomenon) to create an enduring conductive path in cadmium telluride (CdTe) PV, which eliminates the pitfalls in conventional scribing technology. The samples undergoing threshold switching show a promising sign of the conductive path compared to the control samples. This method could potentially lead to the manufacturing technology saving time, money, and raw materials along with added reliability and efficiency. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Comments: 5 Figures, 8 pages

Journal ref: ECS Transactions, 109(1), p.3 (2022)

The Confidence-Competence Gap in Large Language Models: A Cognitive Study

Authors: Aniket Kumar Singh, Suman Devkota, Bishal Lamichhane, Uttam Dhakal, Chandra Dhakal

Abstract: Large Language Models (LLMs) have acquired ubiquitous attention for their performances across diverse domains. Our study here searches through LLMs' cognitive abilities and confidence dynamics. We dive deep into understanding the alignment between their self-assessed confidence and actual performance. We exploit these models with diverse sets of questionnaires and real-world scenarios and extract… ▽ More Large Language Models (LLMs) have acquired ubiquitous attention for their performances across diverse domains. Our study here searches through LLMs' cognitive abilities and confidence dynamics. We dive deep into understanding the alignment between their self-assessed confidence and actual performance. We exploit these models with diverse sets of questionnaires and real-world scenarios and extract how LLMs exhibit confidence in their responses. Our findings reveal intriguing instances where models demonstrate high confidence even when they answer incorrectly. This is reminiscent of the Dunning-Kruger effect observed in human psychology. In contrast, there are cases where models exhibit low confidence with correct answers revealing potential underestimation biases. Our results underscore the need for a deeper understanding of their cognitive processes. By examining the nuances of LLMs' self-assessment mechanism, this investigation provides noteworthy revelations that serve to advance the functionalities and broaden the potential applications of these formidable language models. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 19 pages, 8 Figures, to be published in a journal (Journal TBD), All Authors contributed equally and were Supervised by Chandra Dhakal

MSC Class: ACM-class: I.2.0

Reference Based Color Transfer for Medical Volume Rendering

Authors: Sudarshan Devkota, Summanta Pattanaik

Abstract: The benefits of medical imaging are enormous. Medical images provide considerable amounts of anatomical information and this facilitates medical practitioners in performing effective disease diagnosis and deciding upon the best course of medical treatment. A transition from traditional monochromatic medical images like CT scans, X-Rays or MRI images to a colored 3D representation of the anatomical… ▽ More The benefits of medical imaging are enormous. Medical images provide considerable amounts of anatomical information and this facilitates medical practitioners in performing effective disease diagnosis and deciding upon the best course of medical treatment. A transition from traditional monochromatic medical images like CT scans, X-Rays or MRI images to a colored 3D representation of the anatomical structure further enhances the capabilities of medical professionals in extracting valuable medical information. The proposed framework in our research starts with performing color transfer by finding deep semantic correspondence between two medical images: a colored reference image, and a monochromatic CT scan or an MRI image. We extend this idea of reference-based colorization technique to perform colored volume rendering from a stack of grayscale medical images. Furthermore, we also propose to use an effective reference image recommendation system to aid in the selection of good reference images. With our approach, we successfully perform colored medical volume visualization and essentially eliminate the painstaking process of user interaction with a transfer function to obtain color and opacity parameters for volume rendering. △ Less

Submitted 14 October, 2022; originally announced October 2022.

Deep Learning based Super-Resolution for Medical Volume Visualization with Direct Volume Rendering

Authors: Sudarshan Devkota, Sumanta Pattanaik

Abstract: Modern-day display systems demand high-quality rendering. However, rendering at higher resolution requires a large number of data samples and is computationally expensive. Recent advances in deep learning-based image and video super-resolution techniques motivate us to investigate such networks for high-fidelity upscaling of frames rendered at a lower resolution to a higher resolution. While our w… ▽ More Modern-day display systems demand high-quality rendering. However, rendering at higher resolution requires a large number of data samples and is computationally expensive. Recent advances in deep learning-based image and video super-resolution techniques motivate us to investigate such networks for high-fidelity upscaling of frames rendered at a lower resolution to a higher resolution. While our work focuses on super-resolution of medical volume visualization performed with direct volume rendering, it is also applicable for volume visualization with other rendering techniques. We propose a learning-based technique where our proposed system uses color information along with other supplementary features gathered from our volume renderer to learn efficient upscaling of a low-resolution rendering to a higher-resolution space. Furthermore, to improve temporal stability, we also implement the temporal reprojection technique for accumulating history samples in volumetric rendering. △ Less

Submitted 14 October, 2022; originally announced October 2022.

Revealing Charge Carrier Dynamics and Transport in Te-Doped GaAsSb and GaAsSbN Nanowires by Correlating Ultrafast Terahertz Spectroscopy and Optoelectronic Characterization

Authors: Long Yuan, Rabin Pokharel, Shisir Devkota, Hirandeep Kuchoor, Min-Cheol Lee, Yue Huang, Dmitry A. Yarotski, Shanthi Iyer, Rohit P. Prasankumar

Abstract: Recent advances in the growth of III-V semiconductor nanowires (NWs) hold great promise for nanoscale optoelectronic device applications. Recently, it was found that a small amount of nitrogen (N) incorporation in III-V semiconductor NWs can effectively red-shift their wavelength of operation and tailor their electronic properties for specific applications. However, understanding the impact of N i… ▽ More Recent advances in the growth of III-V semiconductor nanowires (NWs) hold great promise for nanoscale optoelectronic device applications. Recently, it was found that a small amount of nitrogen (N) incorporation in III-V semiconductor NWs can effectively red-shift their wavelength of operation and tailor their electronic properties for specific applications. However, understanding the impact of N incorporation on non-equilibrium charge carrier dynamics and transport in semiconducting NWs is critical in achieving efficient semiconducting NW devices. In this work, ultrafast optical pump-terahertz (THz) probe spectroscopy (OPTP) and electrical characterization have been used to study non-equilibrium carrier dynamics and equilibrium transport in Te-doped GaAsSb and dilute nitride GaAsSb NWs, with the goal of correlating these results with their photo-response under bias and their low-frequency noise characteristics. Nitrogen incorporation in GaAsSb NWs led to a significant increase in the carrier scattering rate, resulting in a severe reduction in carrier mobility. Carrier recombination lifetimes of 33 ps and 147 ps in GaAsSbN and GaAsSb NWs, respectively, were determined using ultrafast OPTP measurements. The reduction in the carrier lifetime and photoinduced optical conductivities are due to the presence of N-induced defects, leading to deterioration in the electrical and optical characteristics of dilute nitride NWs relative to the non-nitride NWs. Finally, we observed a very fast rise time of ~ 2 ps for both NW materials, directly impacting their potential use as high-speed photodetectors. △ Less

Submitted 21 March, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: One of co-author doesn't approve the submission

Multicriteria Scalable Graph Drawing via Stochastic Gradient Descent, $(SGD)^2$

Authors: Reyan Ahmed, Felice De Luca, Sabin Devkota, Stephen Kobourov, Mingwei Li

Abstract: Readability criteria, such as distance or neighborhood preservation, are often used to optimize node-link representations of graphs to enable the comprehension of the underlying data. With few exceptions, graph drawing algorithms typically optimize one such criterion, usually at the expense of others. We propose a layout approach, Multicriteria Scalable Graph Drawing via Stochastic Gradient Descen… ▽ More Readability criteria, such as distance or neighborhood preservation, are often used to optimize node-link representations of graphs to enable the comprehension of the underlying data. With few exceptions, graph drawing algorithms typically optimize one such criterion, usually at the expense of others. We propose a layout approach, Multicriteria Scalable Graph Drawing via Stochastic Gradient Descent, $(SGD)^2$, that can handle multiple readability criteria. $(SGD)^2$ can optimize any criterion that can be described by a differentiable function. Our approach is flexible and can be used to optimize several criteria that have already been considered earlier (e.g., obtaining ideal edge lengths, stress, neighborhood preservation) as well as other criteria which have not yet been explicitly optimized in such fashion (e.g., node resolution, angular resolution, aspect ratio). The approach is scalable and can handle large graphs. A variation of the underlying approach can also be used to optimize many desirable properties in planar graphs, while maintaining planarity. Finally, we provide quantitative and qualitative evidence of the effectiveness of $(SGD)^2$: we analyze the interactions between criteria, measure the quality of layouts generated from $(SGD)^2$ as well as the runtime behavior, and analyze the impact of sample sizes. The source code is available on github and we also provide an interactive demo for small graphs. △ Less

Submitted 2 December, 2021; originally announced December 2021.

Comments: arXiv admin note: text overlap with arXiv:2008.05584

Domain-Centered Support for Layout, Tasks, and Specification for Control Flow Graph Visualization

Authors: Sabin Devkota, Matthew P. LeGendre, Adam Kunen, Pascal Aschwanden, Katherine E. Isaacs

Abstract: Computing professionals in areas like compilers, performance analysis, and security often analyze and manipulate control flow graphs (CFGs) in their work. CFGs are directed networks that describe possible orderings of instructions in the execution of a program. Visualizing a CFG is a common activity in develo** or debugging computational approaches that use them. However, general graph drawing l… ▽ More Computing professionals in areas like compilers, performance analysis, and security often analyze and manipulate control flow graphs (CFGs) in their work. CFGs are directed networks that describe possible orderings of instructions in the execution of a program. Visualizing a CFG is a common activity in develo** or debugging computational approaches that use them. However, general graph drawing layouts, including the hierarchical ones frequently applied to CFGs, do not capture CFG-specific structures or tasks and thus the resulting drawing may not match the needs of their audience, especially for more complicated programs. While several algorithms offer flexibility in specifying the layout, they often require expertise with graph drawing layouts and primitives that these potential users do not have. To bring domain-specific CFG drawing to this audience, we develop CFGConf, a library designed to match the abstraction level of CFG experts. CFGConf provides a JSON interface that produces drawings that can stand-alone or be integrated into multi-view visualization systems. We developed CFGConf through an interactive design process with experts while incorporating lessons learned from previous CFG visualization systems, a survey of CFG drawing conventions in computing systems conferences, and existing design principles for notations. We evaluate CFGConf in terms of expressiveness, usability, and notational efficiency through a user study and illustrative examples. CFG experts were able to use the library to produce the domain-aware layouts and appreciated the task-aware nature of the specification. △ Less

Submitted 25 September, 2022; v1 submitted 6 August, 2021; originally announced August 2021.

CcNav: Understanding Compiler Optimizations in Binary Code

Authors: Sabin Devkota, Pascal Aschwanden, Adam Kunen, Matthew Legendre, Katherine E. Isaacs

Abstract: Program developers spend significant time on optimizing and tuning programs. During this iterative process, they apply optimizations, analyze the resulting code, and modify the compilation until they are satisfied. Understanding what the compiler did with the code is crucial to this process but is very time-consuming and labor-intensive. Users need to navigate through thousands of lines of binary… ▽ More Program developers spend significant time on optimizing and tuning programs. During this iterative process, they apply optimizations, analyze the resulting code, and modify the compilation until they are satisfied. Understanding what the compiler did with the code is crucial to this process but is very time-consuming and labor-intensive. Users need to navigate through thousands of lines of binary code and correlate it to source code concepts to understand the results of the compilation and to identify optimizations. We present a design study in collaboration with program developers and performance analysts. Our collaborators work with various artifacts related to the program such as binary code, source code, control flow graphs, and call graphs. Through interviews, feedback, and pair-analytics sessions, we analyzed their tasks and workflow. Based on this task analysis and through a human-centric design process, we designed a visual analytics system Compilation Navigator (CcNav) to aid exploration of the effects of compiler optimizations on the program. CcNav provides a streamlined workflow and a unified context that integrates disparate artifacts. CcNav supports consistent interactions across all the artifacts making it easy to correlate binary code with source code concepts. CcNav enables users to navigate and filter large binary code to identify and summarize optimizations such as inlining, vectorization, loop unrolling, and code hoisting. We evaluate CcNav through guided sessions and semi-structured interviews. We reflect on our design process, particularly the immersive elements, and on the transferability of design studies through our experience with a previous design study on program analysis. △ Less

Submitted 7 November, 2020; v1 submitted 2 September, 2020; originally announced September 2020.

Comments: IEEE VIS VAST 2020

ACM Class: D.2.5; H.5.2

Graph Drawing via Gradient Descent, $(GD)^2$

Authors: Reyan Ahmed, Felice De Luca, Sabin Devkota, Stephen Kobourov, Mingwei Li

Abstract: Readability criteria, such as distance or neighborhood preservation, are often used to optimize node-link representations of graphs to enable the comprehension of the underlying data. With few exceptions, graph drawing algorithms typically optimize one such criterion, usually at the expense of others. We propose a layout approach, Graph Drawing via Gradient Descent, $(GD)^2$, that can handle multi… ▽ More Readability criteria, such as distance or neighborhood preservation, are often used to optimize node-link representations of graphs to enable the comprehension of the underlying data. With few exceptions, graph drawing algorithms typically optimize one such criterion, usually at the expense of others. We propose a layout approach, Graph Drawing via Gradient Descent, $(GD)^2$, that can handle multiple readability criteria. $(GD)^2$ can optimize any criterion that can be described by a smooth function. If the criterion cannot be captured by a smooth function, a non-smooth function for the criterion is combined with another smooth function, or auto-differentiation tools are used for the optimization. Our approach is flexible and can be used to optimize several criteria that have already been considered earlier (e.g., obtaining ideal edge lengths, stress, neighborhood preservation) as well as other criteria which have not yet been explicitly optimized in such fashion (e.g., vertex resolution, angular resolution, aspect ratio). We provide quantitative and qualitative evidence of the effectiveness of $(GD)^2$ with experimental data and a functional prototype: \url{http://hdc.cs.arizona.edu/~mwli/graph-drawing/}. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Comments: Appears in the Proceedings of the 28th International Symposium on Graph Drawing and Network Visualization (GD 2020)

Stress-Plus-X (SPX) Graph Layout

Authors: Sabin Devkota, Reyan Ahmed, Felice De Luca, Katherine E. Isaacs, Stephen Kobourov

Abstract: Stress, edge crossings, and crossing angles play an important role in the quality and readability of graph drawings. Most standard graph drawing algorithms optimize one of these criteria which may lead to layouts that are deficient in other criteria. We introduce an optimization framework, Stress-Plus-X (SPX), that simultaneously optimizes stress together with several other criteria: edge crossing… ▽ More Stress, edge crossings, and crossing angles play an important role in the quality and readability of graph drawings. Most standard graph drawing algorithms optimize one of these criteria which may lead to layouts that are deficient in other criteria. We introduce an optimization framework, Stress-Plus-X (SPX), that simultaneously optimizes stress together with several other criteria: edge crossings, minimum crossing angle, and upwardness (for directed acyclic graphs). SPX achieves results that are close to the state-of-the-art algorithms that optimize these metrics individually. SPX is flexible and extensible and can optimize a subset or all of these criteria simultaneously. Our experimental analysis shows that our joint optimization approach is successful in drawing graphs with good performance across readability criteria. △ Less

Submitted 23 August, 2019; v1 submitted 4 August, 2019; originally announced August 2019.

Comments: 25 pages, 12 figures, accepted in the 27th International Symposium on Graph Drawing and Network Visualization (GD 2019)

L-Graphs and Monotone L-Graphs

Authors: Abu Reyan Ahmed, Felice De Luca, Sabin Devkota, Alon Efrat, Md Iqbal Hossain, Stephen Kobourov, Jixian Li, Sammi Abida Salma, Eric Welch

Abstract: In an $\mathsf{L}$-embedding of a graph, each vertex is represented by an $\mathsf{L}$-segment, and two segments intersect each other if and only if the corresponding vertices are adjacent in the graph. If the corner of each $\mathsf{L}$-segment in an $\mathsf{L}$-embedding lies on a straight line, we call it a monotone $\mathsf{L}$-embedding. In this paper we give a full characterization of monot… ▽ More In an $\mathsf{L}$-embedding of a graph, each vertex is represented by an $\mathsf{L}$-segment, and two segments intersect each other if and only if the corresponding vertices are adjacent in the graph. If the corner of each $\mathsf{L}$-segment in an $\mathsf{L}$-embedding lies on a straight line, we call it a monotone $\mathsf{L}$-embedding. In this paper we give a full characterization of monotone $\mathsf{L}$-embeddings by introducing a new class of graphs which we call "non-jum**" graphs. We show that a graph admits a monotone $\mathsf{L}$-embedding if and only if the graph is a non-jum** graph. Further, we show that outerplanar graphs, convex bipartite graphs, interval graphs, 3-leaf power graphs, and complete graphs are subclasses of non-jum** graphs. Finally, we show that distance-hereditary graphs and $k$-leaf power graphs ($k\le 4$) admit $\mathsf{L}$-embeddings. △ Less

Submitted 4 March, 2017; originally announced March 2017.