-
Testing a new model of local wind erosion and dust deposition on field campaign data in Morocco. Adaptation of the model for Mars
Authors:
N. Deniskina
Abstract:
Global and mesoscale models represent the background (slowly varying) winds on Mars, but short timescale wind variability is not explicitly represented. The local wind erosion and dust deposition model can be useful for more accurate local wind friction, wind friction threshold, horizontal sand flux and vertical dust flux modeling on Mars. Such a model based on the model of Zender \cite{Zender} is…
▽ More
Global and mesoscale models represent the background (slowly varying) winds on Mars, but short timescale wind variability is not explicitly represented. The local wind erosion and dust deposition model can be useful for more accurate local wind friction, wind friction threshold, horizontal sand flux and vertical dust flux modeling on Mars. Such a model based on the model of Zender \cite{Zender} is proposed in this article. It includes different methods of threshold wind friction estimation and takes into account the influence of atmospheric electric fields on sand and dust elevation processes. The model parameterized for the Earth was tested on data acquired in Morocco field campaign 2013-2014 (Esposito et al.,) \cite{Esposito}, \cite{Esposito2}. Wind friction, wind friction threshold, horizontal sand flux and vertical dust flux were simulated by using the following inputs measured in the field: wind speed, wind direction, air temperature, air pressure, air humidity, solar irradiation and surface roughness length. The same inputs are supposed to be measured by DREAMs equipment on Mars (except for the surface roughness length which can be estimated for Mars according the method of Hebrard \cite{Hebrard}). Simulated and experimental values have shown a good agreement. The model was adapted to Martian conditions and applied to the data of Viking lander. The local wind erosion and dust deposition model parameterized for Mars may serve 1) to analyze local lander/rovers data, 2) a source of local parameters/inputs (like threshold wind friction velocity, sand and dust fluxes) for the MGCM (Mars Global Circulation Model).
△ Less
Submitted 21 July, 2020;
originally announced August 2020.
-
The prototype detection unit of the KM3NeT detector
Authors:
KM3NeT Collaboration,
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
G. C. Androulakis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
T. Avgitas,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
J. Barrios,
A. Belias,
E. Berbee,
A. M. van den Berg
, et al. (224 additional authors not shown)
Abstract:
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt…
▽ More
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°.
△ Less
Submitted 23 December, 2015; v1 submitted 6 October, 2015;
originally announced October 2015.
-
Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype
Authors:
S. Adrián-Martínez,
S. Aiello,
F. Ameli,
M. Anghinolfi,
M. Ardid,
G. Barbarino,
E. Barbarito,
F. C. T. Barbato,
N. Beverini,
S. Biagi,
A. Biagioni,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calí,
D. Calvo,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa
, et al. (79 additional authors not shown)
Abstract:
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italia…
▽ More
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.
△ Less
Submitted 28 January, 2016; v1 submitted 17 July, 2015;
originally announced July 2015.
-
Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower
Authors:
S. Aiello,
F. Ameli,
M. Anghinolfi,
G. Barbarino,
E. Barbarito,
F. Barbato,
N. Beverini,
S. Biagi,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calì,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa,
G. Cuttone,
C. D'Amato,
A. D'Amico,
G. De Bonis
, et al. (68 additional authors not shown)
Abstract:
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the…
▽ More
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.
△ Less
Submitted 3 December, 2014; v1 submitted 2 December, 2014;
originally announced December 2014.
-
Deep sea tests of a prototype of the KM3NeT digital optical module
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
R. de Asmundis,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
A. Belias,
E. Berbee,
A. M. van den Berg,
A. Berkien,
V. Bertin,
S. Beurthey
, et al. (225 additional authors not shown)
Abstract:
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th…
▽ More
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.
△ Less
Submitted 16 May, 2014; v1 submitted 5 May, 2014;
originally announced May 2014.
-
The DAME/VO-Neural Infrastructure: an Integrated Data Mining System Support for the Science Community
Authors:
M. Brescia,
A. Corazza,
S. Cavuoti,
G. d'Angelo,
R. D'Abrusco,
C. Donalek,
S. G. Djorgovski,
N. Deniskina,
M. Fiore,
M. Garofalo,
O. Laurino,
G. Longo A. Mahabal,
F. Manna,
A. Nocella,
B. Skordovski
Abstract:
Astronomical data are gathered through a very large number of heterogeneous techniques and stored in very diversified and often incompatible data repositories. Moreover in the e-science environment, it is needed to integrate services across distributed, heterogeneous, dynamic "virtual organizations" formed by different resources within a single enterprise and/or external resource sharing and servi…
▽ More
Astronomical data are gathered through a very large number of heterogeneous techniques and stored in very diversified and often incompatible data repositories. Moreover in the e-science environment, it is needed to integrate services across distributed, heterogeneous, dynamic "virtual organizations" formed by different resources within a single enterprise and/or external resource sharing and service provider relationships. The DAME/VONeural project, run jointly by the University Federico II, INAF (National Institute of Astrophysics) Astronomical Observatories of Napoli and the California Institute of Technology, aims at creating a single, sustainable, distributed e-infrastructure for data mining and exploration in massive data sets, to be offered to the astronomical (but not only) community as a web application. The framework makes use of distributed computing environments (e.g. S.Co.P.E.) and matches the international IVOA standards and requirements. The integration process is technically challenging due to the need of achieving a specific quality of service when running on top of different native platforms. In these terms, the result of the DAME/VO-Neural project effort will be a service-oriented architecture, obtained by using appropriate standards and incorporating Grid paradigms and restful Web services frameworks where needed, that will have as main target the integration of interdisciplinary distributed systems within and across organizational domains.
△ Less
Submitted 4 December, 2011;
originally announced December 2011.
-
Demonstration and Comparison of Operation of Photomultiplier Tubes at Liquid Argon Temperature
Authors:
R. Acciarri,
M. Antonello,
F. Boffelli,
M. Cambiaghi,
N. Canci,
F. Cavanna,
A. G. Cocco,
N. Deniskina,
F. Di Pompeo,
G. Fiorillo,
C. Galbiati,
L. Grandi,
P. Kryczynski,
G. Meng,
C. Montanari,
O. Palamara,
L. Pandola,
F. Perfetto,
G. B. Piano Mortari,
F. Pietropaolo,
G. L. Raselli,
M. Rossella,
C. Rubbia,
E. Segreto,
A. M. Szelc
, et al. (4 additional authors not shown)
Abstract:
Liquified noble gases are widely used as a target in direct Dark Matter searches. Signals from scintillation in the liquid, following energy deposition from the recoil nuclei scattered by Dark Matter particles (e.g. WIMPs), should be recorded down to very low energies by photosensors suitably designed to operate at cryogenic temperatures. Liquid Argon based detectors for Dark Matter searches curre…
▽ More
Liquified noble gases are widely used as a target in direct Dark Matter searches. Signals from scintillation in the liquid, following energy deposition from the recoil nuclei scattered by Dark Matter particles (e.g. WIMPs), should be recorded down to very low energies by photosensors suitably designed to operate at cryogenic temperatures. Liquid Argon based detectors for Dark Matter searches currently implement photo multiplier tubes for signal read-out. In the last few years PMTs with photocathodes operating down to liquid Argon temperatures (87 K) have been specially developed with increasing Quantum Efficiency characteristics. The most recent of these, Hamamatsu Photonics Mod. R11065 with peak QE up to about 35%, has been extensively tested within the R&D program of the WArP Collaboration. During these testes the Hamamatsu PMTs showed superb performance and allowed obtaining a light yield around 7 phel/keVee in a Liquid Argon detector with a photocathodic coverage in the 12% range, sufficient for detection of events down to few keVee of energy deposition. This shows that this new type of PMT is suited for experimental applications, in particular for new direct Dark Matter searches with LAr-based experiments.
△ Less
Submitted 26 September, 2011; v1 submitted 29 August, 2011;
originally announced August 2011.
-
Astrophysics in S.Co.P.E
Authors:
M. Brescia,
S. Cavuoti,
G. D'Angelo,
R. D'Abrusco,
C. Donalek,
N. Deniskina,
O. Laurino,
G. Longo
Abstract:
S.Co.P.E. is one of the four projects funded by the Italian Government in order to provide Southern Italy with a distributed computing infrastructure for fundamental science. Beside being aimed at building the infrastructure, S.Co.P.E. is also actively pursuing research in several areas among which astrophysics and observational cosmology. We shortly summarize the most significant results obtain…
▽ More
S.Co.P.E. is one of the four projects funded by the Italian Government in order to provide Southern Italy with a distributed computing infrastructure for fundamental science. Beside being aimed at building the infrastructure, S.Co.P.E. is also actively pursuing research in several areas among which astrophysics and observational cosmology. We shortly summarize the most significant results obtained in the first two years of the project and related to the development of middleware and Data Mining tools for the Virtual Observatory.
△ Less
Submitted 7 July, 2008;
originally announced July 2008.
-
GRID-Launcher v.1.0
Authors:
N. Deniskina,
M. Brescia,
S. Cavuoti,
G. d'Angelo,
O. Laurino,
G. Longo
Abstract:
GRID-launcher-1.0 was built within the VO-Tech framework, as a software interface between the UK-ASTROGRID and a generic GRID infrastructures in order to allow any ASTROGRID user to launch on the GRID computing intensive tasks from the ASTROGRID Workbench or Desktop. Even though of general application, so far the Grid-Launcher has been tested on a few selected softwares (VONeural-MLP, VONeural-S…
▽ More
GRID-launcher-1.0 was built within the VO-Tech framework, as a software interface between the UK-ASTROGRID and a generic GRID infrastructures in order to allow any ASTROGRID user to launch on the GRID computing intensive tasks from the ASTROGRID Workbench or Desktop. Even though of general application, so far the Grid-Launcher has been tested on a few selected softwares (VONeural-MLP, VONeural-SVM, Sextractor and SWARP) and on the SCOPE-GRID.
△ Less
Submitted 6 June, 2008;
originally announced June 2008.
-
The VO-Neural project: recent developments and some applications
Authors:
M. Brescia,
S. Cavuoti,
G. d'Angelo,
R. D'Abrusco,
N. Deniskina,
M. Garofalo,
O. Laurino,
G. Longo,
A. Nocella,
B. Skordovski
Abstract:
VO-Neural is the natural evolution of the Astroneural project which was started in 1994 with the aim to implement a suite of neural tools for data mining in astronomical massive data sets. At a difference with its ancestor, which was implemented under Matlab, VO-Neural is written in C++, object oriented, and it is specifically tailored to work in distributed computing architectures. We discuss t…
▽ More
VO-Neural is the natural evolution of the Astroneural project which was started in 1994 with the aim to implement a suite of neural tools for data mining in astronomical massive data sets. At a difference with its ancestor, which was implemented under Matlab, VO-Neural is written in C++, object oriented, and it is specifically tailored to work in distributed computing architectures. We discuss the current status of implementation of VO-Neural, present an application to the classification of Active Galactic Nuclei, and outline the ongoing work to improve the functionalities of the package.
△ Less
Submitted 5 June, 2008;
originally announced June 2008.
