Showing 1–50 of 75 results for author: Denis, L

A Step Test to Evaluate the Susceptibility to Severe High-Altitude Illness in Field Conditions

Authors: Eric Hermand, Léo Lesaint, Laura Denis, Jean-Paul Richalet, François Lhuissier

Abstract: A laboratory-based hypoxic exercise test, performed on a cycle ergometer, can be used to predict susceptibility to severe high-altitude illness (SHAI) through the calculation of a clinicophysiological SHAI score. Our objective was to design a field-condition test and compare its derived SHAI score and various physiological parameters, such as peripheral oxygen saturation (SpO2), and cardiac and ve… ▽ More A laboratory-based hypoxic exercise test, performed on a cycle ergometer, can be used to predict susceptibility to severe high-altitude illness (SHAI) through the calculation of a clinicophysiological SHAI score. Our objective was to design a field-condition test and compare its derived SHAI score and various physiological parameters, such as peripheral oxygen saturation (SpO2), and cardiac and ventilatory responses to hypoxia during exercise (HCRe and HVRe, respectively), to the laboratory test. A group of 43 healthy subjects (15 females and 28 males), with no prior experience at high altitude, performed a hypoxic cycle ergometer test (simulated altitude of 4,800 m) and step tests (20 cm high step) at 3,000, 4,000, and 4,800 m simulated altitudes. According to tested altitudes, differences were observed in O2 desaturation, heart rate, and minute ventilation (p < 0.001), whereas the computed HCRe and HVRe were not different (p = 0.075 and p = 0.203, respectively). From the linear relationships between the step test and SHAI scores, we defined a risk zone, allowing us to evaluate the risk of develo** SHAI and take adequate preventive measures in field conditions, from the calculated step test score for the given altitude. The predictive value of this new field test remains to be validated in real high-altitude conditions. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Comments: High Altitude Medicine and Biology, 2024

Shrinkage MMSE estimators of covariances beyond the zero-mean and stationary variance assumptions

Authors: Olivier Flasseur, Eric Thiébaut, Loïc Denis, Maud Langlois

Abstract: We tackle covariance estimation in low-sample scenarios, employing a structured covariance matrix with shrinkage methods. These involve convexly combining a low-bias/high-variance empirical estimate with a biased regularization estimator, striking a bias-variance trade-off. Literature provides optimal settings of the regularization amount through risk minimization between the true covariance and i… ▽ More We tackle covariance estimation in low-sample scenarios, employing a structured covariance matrix with shrinkage methods. These involve convexly combining a low-bias/high-variance empirical estimate with a biased regularization estimator, striking a bias-variance trade-off. Literature provides optimal settings of the regularization amount through risk minimization between the true covariance and its shrunk counterpart. Such estimators were derived for zero-mean statistics with i.i.d. diagonal regularization matrices accounting for the average sample variance solely. We extend these results to regularization matrices accounting for the sample variances both for centered and non-centered samples. In the latter case, the empirical estimate of the true mean is incorporated into our shrinkage estimators. Introducing confidence weights into the statistics also enhance estimator robustness against outliers. We compare our estimators to other shrinkage methods both on numerical simulations and on real data to solve a detection problem in astronomy. △ Less

Submitted 26 June, 2024; v1 submitted 11 March, 2024; originally announced March 2024.

Comments: Accepted to EUSIPCO 2024

Beyond FRiM, ASAP: a family of sparse approximation for covariance matrices and preconditioners

Authors: Éric Thiébaut, Michel Tallon, Samuel Thé, Loïc Denis

Abstract: The FRiM fractal operator belongs to a family of operators, called ASAP, defined by an ordered selection of nearest neighbors. This generalization provides means to improve upon the good properties of FRiM. We propose a fast algorithm to build an ASAP operator mimicking the fractal structure of FRiM for pupils of any size and geometry and to learn the sparse coefficients from empirical data. We em… ▽ More The FRiM fractal operator belongs to a family of operators, called ASAP, defined by an ordered selection of nearest neighbors. This generalization provides means to improve upon the good properties of FRiM. We propose a fast algorithm to build an ASAP operator mimicking the fractal structure of FRiM for pupils of any size and geometry and to learn the sparse coefficients from empirical data. We empirically show the good approximation by ASAP of correlated statistics and the benefits of ASAP for solving phase restoration problems. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Journal ref: Adaptive Optics Systems VIII, Jul 2022, Montr{é}al, Canada. pp.121852Q

CLASS Angular Power Spectra and Map-Component Analysis for 40 GHz Observations through 2022

Authors: Joseph R. Eimer, Yunyang Li, Michael K. Brewer, Rui Shi, Aamir Ali, John W. Appel, Charles L. Bennett, Sarah Marie Bruno, Ricardo Bustos, David T. Chuss, Joseph Cleary, Sumit Dahal, Rahul Datta, Jullianna Denes Couto, Kevin L. Denis, Rolando Dünner, Thomas Essinger-Hileman, Pedro Fluxá, Johannes Hubmayer, Kathleen Harrington, Jeffrey Iuliano, John Karakla, Tobias A. Marriage, Carolina Núñez, Lucas Parker , et al. (9 additional authors not shown)

Abstract: Measurement of the largest angular scale ($\ell < 30$) features of the cosmic microwave background (CMB) polarization is a powerful way to constrain the optical depth to reionization and search for the signature of inflation through the detection of primordial $B$-modes. We present an analysis of maps covering 73.6\% of the sky made from the $40\,\mathrm{GHz}$ channel of the Cosmology Large Angula… ▽ More Measurement of the largest angular scale ($\ell < 30$) features of the cosmic microwave background (CMB) polarization is a powerful way to constrain the optical depth to reionization and search for the signature of inflation through the detection of primordial $B$-modes. We present an analysis of maps covering 73.6\% of the sky made from the $40\,\mathrm{GHz}$ channel of the Cosmology Large Angular Scale Surveyor (CLASS) from 2016 August to 2022 May. Taking advantage of the measurement stability enabled by front-end polarization modulation and excellent conditions from the Atacama Desert, we show this channel achieves higher sensitivity than the analogous frequencies from satellite measurements in the range $10 < \ell < 100$. Simulations show the CLASS linear (circular) polarization maps have a white noise level of $125 \,(130)\,\mathrm{μK\, arcmin}$. We measure the Galaxy-masked $EE$ and $BB$ spectra of diffuse synchrotron radiation and compare to space-based measurements at similar frequencies. In combination with external data, we expand measurements of the spatial variations of the synchrotron spectral energy density (SED) to include new sky regions and measure the diffuse SED in the harmonic domain. We place a new upper limit on a background of circular polarization in the range $5 < \ell < 125$ with the first bin showing $D_\ell < 0.023$ $\mathrm{μK^2_{CMB}}$ at 95\% confidence. These results establish a new standard for recovery of the largest-scale CMB polarization from the ground and signal exciting possibilities when the higher sensitivity and higher-frequency CLASS channels are included in the analysis. △ Less

Submitted 14 February, 2024; v1 submitted 1 September, 2023; originally announced September 2023.

Comments: 38 pages, 25 figures, 6 tables. Accepted to The Astrophysical Journal

Multitemporal SAR images change detection and visualization using RABASAR and simplified GLR

Authors: Weiying Zhao, Charles-Alban Deledalle, Loïc Denis, Henri Maître, Jean-Marie Nicolas, Florence Tupin

Abstract: Understanding the state of changed areas requires that precise information be given about the changes. Thus, detecting different kinds of changes is important for land surface monitoring. SAR sensors are ideal to fulfil this task, because of their all-time and all-weather capabilities, with good accuracy of the acquisition geometry and without effects of atmospheric constituents for amplitude data… ▽ More Understanding the state of changed areas requires that precise information be given about the changes. Thus, detecting different kinds of changes is important for land surface monitoring. SAR sensors are ideal to fulfil this task, because of their all-time and all-weather capabilities, with good accuracy of the acquisition geometry and without effects of atmospheric constituents for amplitude data. In this study, we propose a simplified generalized likelihood ratio ($S_{GLR}$) method assuming that corresponding temporal pixels have the same equivalent number of looks (ENL). Thanks to the denoised data provided by a ratio-based multitemporal SAR image denoising method (RABASAR), we successfully applied this similarity test approach to compute the change areas. A new change magnitude index method and an improved spectral clustering-based change classification method are also developed. In addition, we apply the simplified generalized likelihood ratio to detect the maximum change magnitude time, and the change starting and ending times. Then, we propose to use an adaptation of the REACTIV method to visualize the detection results vividly. The effectiveness of the proposed methods is demonstrated through the processing of simulated and SAR images, and the comparison with classical techniques. In particular, numerical experiments proved that the developed method has good performances in detecting farmland area changes, building area changes, harbour area changes and flooding area changes. △ Less

Submitted 15 July, 2023; originally announced July 2023.

Characterization of stellar companion from high-contrast long-slit spectroscopy data: The EXtraction Of SPEctrum of COmpanion (EXOSPECO) algorithm

Authors: Samuel Thé, Éric Thiébaut, Loïc Denis, Thibault Wanner, Rémi Thiébaut, Maud Langlois, Ferréol Soulez

Abstract: High-contrast long-slit spectrographs can be used to characterize exoplanets. High-contrast long-slit spectroscopic data are however corrupted by stellar leakages which largely dominate other signals and make the process of extracting the companion spectrum very challenging. This paper presents a complete method to calibrate the spectrograph and extract the signal of interest. The proposed metho… ▽ More High-contrast long-slit spectrographs can be used to characterize exoplanets. High-contrast long-slit spectroscopic data are however corrupted by stellar leakages which largely dominate other signals and make the process of extracting the companion spectrum very challenging. This paper presents a complete method to calibrate the spectrograph and extract the signal of interest. The proposed method is based on a flexible direct model of the high-contrast long-slit spectroscopic data. This model explicitly accounts for the instrumental response and for the contributions of both the star and the companion. The contributions of these two components and the calibration parameters are jointly estimated by solving a regularized inverse problem. This problem having no closed-form solution, we propose an alternating minimization strategy to effectively find the solution. We have tested our method on empirical long-slit spectroscopic data and by injecting synthetic companion signals in these data. The proposed initialization and the alternating strategy effectively avoid the self-subtraction bias, even for companions observed very close to the coronagraphic mask. Careful modeling and calibration of the angular and spectral dispersion laws of the instrument clearly reduce the contamination by the stellar leakages. In practice, the outputs of the method are mostly driven by a single hyper-parameter which tunes the level of regularization of the companion SED. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: Paper under review by Astronomy & Astrophysics

Journal ref: A&A 678, A77 (2023)

A Deep Learning Approach for SAR Tomographic Imaging of Forested Areas

Authors: Zoé Berenger, Loïc Denis, Florence Tupin, Laurent Ferro-Famil, Yue Huang

Abstract: Synthetic aperture radar tomographic imaging reconstructs the three-dimensional reflectivity of a scene from a set of coherent acquisitions performed in an interferometric configuration. In forest areas, a large number of elements backscatter the radar signal within each resolution cell. To reconstruct the vertical reflectivity profile, state-of-the-art techniques perform a regularized inversion i… ▽ More Synthetic aperture radar tomographic imaging reconstructs the three-dimensional reflectivity of a scene from a set of coherent acquisitions performed in an interferometric configuration. In forest areas, a large number of elements backscatter the radar signal within each resolution cell. To reconstruct the vertical reflectivity profile, state-of-the-art techniques perform a regularized inversion implemented in the form of iterative minimization algorithms. We show that light-weight neural networks can be trained to perform the tomographic inversion with a single feed-forward pass, leading to fast reconstructions that could better scale to the amount of data provided by the future BIOMASS mission. We train our encoder-decoder network using simulated data and validate our technique on real L-band and P-band data. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: Submitted to IEEE Geoscience and Remote Sensing Letters, January 2023

Journal ref: IEEE Geoscience and Remote Sensing Letters, vol. 20, pp. 1-5, 2023, Art no. 4007405

On-sky performance of new 90 GHz detectors for the Cosmology Large Angular Scale Surveyor (CLASS)

Authors: Carolina Núñez, John W. Appel, Michael K. Brewer, Sarah Marie Bruno, Rahul Datta, Charles L. Bennett, Ricardo Bustos, David T. Chuss, Sumit Dahal, Kevin L. Denis, Joseph Eimer, Thomas Essinger-Hileman, Kyle Helson, Tobias Marriage, Carolina Morales Pérez, Ivan L. Padilla, Matthew A. Petroff, Karwan Rostem, Duncan J. Watts, Edward J. Wollack, Zhilei Xu

Abstract: The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert and designed to measure the polarized Cosmic Microwave Background (CMB) over large angular scales. The CLASS array is currently observing with three telescopes covering four frequency bands: one at 40 GHz (Q); one at 90 GHz (W1); and one dic… ▽ More The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert and designed to measure the polarized Cosmic Microwave Background (CMB) over large angular scales. The CLASS array is currently observing with three telescopes covering four frequency bands: one at 40 GHz (Q); one at 90 GHz (W1); and one dichroic system at 150/220 GHz (HF). During the austral winter of 2022, we upgraded the first 90 GHz telescope (W1) by replacing four of the seven focal plane modules. These new modules contain detector wafers with an updated design, aimed at improving the optical efficiency and detector stability. We present a description of the design changes and measurements of on-sky optical efficiencies derived from observations of Jupiter. △ Less

Submitted 23 March, 2023; v1 submitted 3 January, 2023; originally announced January 2023.

Comments: 5 pages, 3 figures, to appear in the IEEE Transactions on Applied Superconductivity. arXiv admin note: text overlap with arXiv:2208.05006

Design and characterization of new 90 GHz detectors for the Cosmology Large Angular Scale Surveyor (CLASS)

Authors: Carolina Núñez, John W. Appel, Sarah Marie Bruno, Rahul Datta, Aamir Ali, Charles L. Bennett, Sumit Dahal, Jullianna Denes Couto, Kevin L. Denis, Joseph Eimer, Francisco Espinoza, Tom Essinger-Hileman, Kyle Helson, Jeffrey Iuliano, Tobias A. Marriage, Carolina Morales Pérez, Deniz Augusto Nunes Valle, Matthew A. Petroff, Karwan Rostem, Rui Shi, Duncan J. Watts, Edward J. Wollack, Zhilei Xu

Abstract: The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert. CLASS is designed to measure "E-mode" (even parity) and "B-mode" (odd parity) polarization patterns in the Cosmic Microwave Background (CMB) over large angular scales with the aim of improving our understanding of inflation, reionization, a… ▽ More The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert. CLASS is designed to measure "E-mode" (even parity) and "B-mode" (odd parity) polarization patterns in the Cosmic Microwave Background (CMB) over large angular scales with the aim of improving our understanding of inflation, reionization, and dark matter. CLASS is currently observing with three telescopes covering four frequency bands: one at 40 GHz (Q); one at 90 GHz (W1); and one dichroic system at 150/220 GHz (G). In these proceedings, we discuss the updated design and in-lab characterization of new 90 GHz detectors. The new detectors include design changes to the transition-edge sensor (TES) bolometer architecture, which aim to improve stability and optical efficiency. We assembled and tested four new detector wafers, to replace four modules of the W1 focal plane. These detectors were installed into the W1 telescope, and will achieve first light in the austral winter of 2022. We present electrothermal parameters and bandpass measurements from in-lab dark and optical testing. From in-lab dark tests, we also measure a median NEP of 12.3 $\mathrm{aW\sqrt{s}}$ across all four wafers about the CLASS signal band, which is below the expected photon NEP of 32 $\mathrm{aW\sqrt{s}}$ from the field. We therefore expect the new detectors to be photon noise limited. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Comments: 10 pages, 6 figures, to appear in Proc. SPIE Astronomical Telescopes and Instrumentation 2022

Fast strategies for multi-temporal speckle reduction of Sentinel-1 GRD images

Authors: Inès Meraoumia, Emanuele Dalsasso, Loïc Denis, Florence Tupin

Abstract: Reducing speckle and limiting the variations of the physical parameters in Synthetic Aperture Radar (SAR) images is often a key-step to fully exploit the potential of such data. Nowadays, deep learning approaches produce state of the art results in single-image SAR restoration. Nevertheless, huge multi-temporal stacks are now often available and could be efficiently exploited to further improve im… ▽ More Reducing speckle and limiting the variations of the physical parameters in Synthetic Aperture Radar (SAR) images is often a key-step to fully exploit the potential of such data. Nowadays, deep learning approaches produce state of the art results in single-image SAR restoration. Nevertheless, huge multi-temporal stacks are now often available and could be efficiently exploited to further improve image quality. This paper explores two fast strategies employing a single-image despeckling algorithm, namely SAR2SAR, in a multi-temporal framework. The first one is based on Quegan filter and replaces the local reflectivity pre-estimation by SAR2SAR. The second one uses SAR2SAR to suppress speckle from a ratio image encoding the multi-temporal information under the form of a "super-image", i.e. the temporal arithmetic mean of a time series. Experimental results on Sentinel-1 GRD data show that these two multi-temporal strategies provide improved filtering results while adding a limited computational cost. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Multi-temporal speckle reduction with self-supervised deep neural networks

Authors: Inès Meraoumia, Emanuele Dalsasso, Loïc Denis, Rémy Abergel, Florence Tupin

Abstract: Speckle filtering is generally a prerequisite to the analysis of synthetic aperture radar (SAR) images. Tremendous progress has been achieved in the domain of single-image despeckling. Latest techniques rely on deep neural networks to restore the various structures and textures peculiar to SAR images. The availability of time series of SAR images offers the possibility of improving speckle filteri… ▽ More Speckle filtering is generally a prerequisite to the analysis of synthetic aperture radar (SAR) images. Tremendous progress has been achieved in the domain of single-image despeckling. Latest techniques rely on deep neural networks to restore the various structures and textures peculiar to SAR images. The availability of time series of SAR images offers the possibility of improving speckle filtering by combining different speckle realizations over the same area. The supervised training of deep neural networks requires ground-truth speckle-free images. Such images can only be obtained indirectly through some form of averaging, by spatial or temporal integration, and are imperfect. Given the potential of very high quality restoration reachable by multi-temporal speckle filtering, the limitations of ground-truth images need to be circumvented. We extend a recent self-supervised training strategy for single-look complex SAR images, called MERLIN, to the case of multi-temporal filtering. This requires modeling the sources of statistical dependencies in the spatial and temporal dimensions as well as between the real and imaginary components of the complex amplitudes. Quantitative analysis on datasets with simulated speckle indicates a clear improvement of speckle reduction when additional SAR images are included. Our method is then applied to stacks of TerraSAR-X images and shown to outperform competing multi-temporal speckle filtering approaches. The code of the trained models is made freely available on the Gitlab of the IMAGES team of the LTCI Lab, Télécom Paris Institut Polytechnique de Paris (https://gitlab.telecom-paris.fr/ring/multi-temporal-merlin/). △ Less

Submitted 25 July, 2022; v1 submitted 22 July, 2022; originally announced July 2022.

As if by magic: self-supervised training of deep despeckling networks with MERLIN

Authors: Emanuele Dalsasso, Loïc Denis, Florence Tupin

Abstract: Speckle fluctuations seriously limit the interpretability of synthetic aperture radar (SAR) images. Speckle reduction has thus been the subject of numerous works spanning at least four decades. Techniques based on deep neural networks have recently achieved a new level of performance in terms of SAR image restoration quality. Beyond the design of suitable network architectures or the selection of… ▽ More Speckle fluctuations seriously limit the interpretability of synthetic aperture radar (SAR) images. Speckle reduction has thus been the subject of numerous works spanning at least four decades. Techniques based on deep neural networks have recently achieved a new level of performance in terms of SAR image restoration quality. Beyond the design of suitable network architectures or the selection of adequate loss functions, the construction of training sets is of uttermost importance. So far, most approaches have considered a supervised training strategy: the networks are trained to produce outputs as close as possible to speckle-free reference images. Speckle-free images are generally not available, which requires resorting to natural or optical images or the selection of stable areas in long time series to circumvent the lack of ground truth. Self-supervision, on the other hand, avoids the use of speckle-free images. We introduce a self-supervised strategy based on the separation of the real and imaginary parts of single-look complex SAR images, called MERLIN (coMplex sElf-supeRvised despeckLINg), and show that it offers a straightforward way to train all kinds of deep despeckling networks. Networks trained with MERLIN take into account the spatial correlations due to the SAR transfer function specific to a given sensor and imaging mode. By requiring only a single image, and possibly exploiting large archives, MERLIN opens the door to hassle-free as well as large-scale training of despeckling networks. The code of the trained models is made freely available at https://gitlab.telecom-paris.fr/RING/MERLIN. △ Less

Submitted 15 November, 2021; v1 submitted 25 October, 2021; originally announced October 2021.

Comments: To appear on IEEE Transactions on Geoscience and Remote Sensing

Spectral Analysis of Solar Radio Type III Bursts from 20 kHz to 410 MHz

Authors: K. Sasikumar Raja, Milan Maksimovic, Eduard P. Kontar, Xavier Bonnin, Philippe Zarka, Laurent Lamy, Hamish Reid, Nicole Vilmer, Alain Lecacheux, Vratislav Krupar, Baptiste Cecconi, Lahmiti Nora, Laurent Denis

Abstract: We present the statistical analysis of the spectral response of solar radio type III bursts over the wide frequency range between 20 kHz and 410 MHz. For this purpose, we have used observations that were carried out using both spaced-based (Wind/Waves) and ground-based (Nançay Decameter Array and Nançay Radioheliograph) facilities. In order to compare the flux densities observed by the different i… ▽ More We present the statistical analysis of the spectral response of solar radio type III bursts over the wide frequency range between 20 kHz and 410 MHz. For this purpose, we have used observations that were carried out using both spaced-based (Wind/Waves) and ground-based (Nançay Decameter Array and Nançay Radioheliograph) facilities. In order to compare the flux densities observed by the different instruments, we have carefully calibrated the data and displayed them in Solar Flux Units. The main result of our study is that type III bursts, in the metric to hectometric wavelength range, statistically exhibit a clear maximum of their median radio flux density around 2 MHz. Although this result was already reported by inspecting the spectral profiles of type III bursts in the frequency range 20 kHz - 20 MHz, our study extends such analysis for the first time to metric radio frequencies (i.e., from 20 kHz to 410 MHz) and confirms the maximum spectral response around 2 MHz. In addition, using a simple empirical model we show that the median radio flux $S$ of the studied dataset obeys the polynomial form $Y = 0.04 X^3 - 1.63 X^2 + 16.30 X -41.24$, with $X=\ln{(F_\text{MHz})}$ and with $Y=\ln{(S_\text{SFU})}$. Using the Sittler and Guhathakurtha model for coronal streamers \citep{Sit1999}, we have found that maximum of radio power falls therefore in the range 4 to 10 $R_{\odot}$, depending on whether the type III emissions are assumed to be at the fundamental or the harmonic. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: 21 Pages, 6 Figures, 1 Table, Accepted for publication in the Astrophysical Journal

REXPACO ASDI: Joint unmixing and deconvolution of the circumstellar environment by angular and spectral differential imaging

Authors: Olivier Flasseur, Loïc Denis, Éric Thiébaut, Maud Langlois

Abstract: Angular and spectral differential imaging is an observational technique of choice to investigate the immediate vicinity of stars. The relative angular motion and spectral scaling between on-axis and off-axis sources are exploited by post-processing techniques to separate two components: the residual star light and the light coming from surrounding objects such as circumstellar disks or point-like… ▽ More Angular and spectral differential imaging is an observational technique of choice to investigate the immediate vicinity of stars. The relative angular motion and spectral scaling between on-axis and off-axis sources are exploited by post-processing techniques to separate two components: the residual star light and the light coming from surrounding objects such as circumstellar disks or point-like objects. This paper introduces a new algorithm to jointly unmix these two components and deconvolve disk images. The proposed algorithm is based on a statistical modeling of the residual star light, accounting for its spatial and spectral correlations. While critical, these correlations are not modeled and compensated for by existing reconstruction algorithms. We leverage dedicated shrinkage techniques to estimate the large number of parameters of our model of correlations in a data-driven fashion. We show that the resulting separable model of the spatial and spectral covariances captures very accurately the star light, thus allowing its efficient suppression. We apply our method on several datasets from the VLT/SPHERE instrument and compare the performances against standard algorithms of the field (cADI, PCA). We show that accounting for the multiple correlations of the data significantly enhances the reconstruction quality, leading to better preservation of both the disk morphology and photometry. Thanks to its unique joint spectral modeling of the data, the proposed algorithm can reconstruct disks having a circular symmetry (e.g., rings, spirals) at intensities one million times fainter than the star, without resorting to additional reference datasets free from the off-axis objects. △ Less

Submitted 14 May, 2024; v1 submitted 26 September, 2021; originally announced September 2021.

Comments: Submitted to MNRAS

Four-year Cosmology Large Angular Scale Surveyor (CLASS) Observations: On-sky Receiver Performance at 40, 90, 150, and 220 GHz Frequency Bands

Authors: Sumit Dahal, John W. Appel, Rahul Datta, Michael K. Brewer, Aamir Ali, Charles L. Bennett, Ricardo Bustos, Manwei Chan, David T. Chuss, Joseph Cleary, Jullianna D. Couto, Kevin L. Denis, Rolando Dünner, Joseph Eimer, Francisco Espinoza, Thomas Essinger-Hileman, Joseph E. Golec, Kathleen Harrington, Kyle Helson, Jeffrey Iuliano, John Karakla, Yunyang Li, Tobias A. Marriage, Jeffrey J. McMahon, Nathan J. Miller , et al. (15 additional authors not shown)

Abstract: The Cosmology Large Angular Scale Surveyor (CLASS) observes the polarized cosmic microwave background (CMB) over the angular scales of 1$^\circ \lesssim θ\leq$ 90$^\circ$ with the aim of characterizing primordial gravitational waves and cosmic reionization. We report on the on-sky performance of the CLASS Q-band (40 GHz), W-band (90 GHz), and dichroic G-band (150/220 GHz) receivers that have been… ▽ More The Cosmology Large Angular Scale Surveyor (CLASS) observes the polarized cosmic microwave background (CMB) over the angular scales of 1$^\circ \lesssim θ\leq$ 90$^\circ$ with the aim of characterizing primordial gravitational waves and cosmic reionization. We report on the on-sky performance of the CLASS Q-band (40 GHz), W-band (90 GHz), and dichroic G-band (150/220 GHz) receivers that have been operational at the CLASS site in the Atacama desert since June 2016, May 2018, and September 2019, respectively. We show that the noise-equivalent power measured by the detectors matches the expected noise model based on on-sky optical loading and lab-measured detector parameters. Using Moon, Venus, and Jupiter observations, we obtain power-to-antenna-temperature calibrations and optical efficiencies for the telescopes. From the CMB survey data, we compute instantaneous array noise-equivalent-temperature sensitivities of 22, 19, 23, and 71 $\mathrm{μK}_\mathrm{cmb}\sqrt{\mathrm{s}}$ for the 40, 90, 150, and 220 GHz frequency bands, respectively. These noise temperatures refer to white noise amplitudes, which contribute to sky maps at all angular scales. Future papers will assess additional noise sources impacting larger angular scales. △ Less

Submitted 9 February, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Comments: 13 pages, 3 figures, published in ApJ

Journal ref: The Astrophysical Journal, 926:33 (9pp), 2022 February 10

Image Restoration for Remote Sensing: Overview and Toolbox

Authors: Benhood Rasti, Yi Chang, Emanuele Dalsasso, Loïc Denis, Pedram Ghamisi

Abstract: Remote sensing provides valuable information about objects or areas from a distance in either active (e.g., RADAR and LiDAR) or passive (e.g., multispectral and hyperspectral) modes. The quality of data acquired by remotely sensed imaging sensors (both active and passive) is often degraded by a variety of noise types and artifacts. Image restoration, which is a vibrant field of research in the rem… ▽ More Remote sensing provides valuable information about objects or areas from a distance in either active (e.g., RADAR and LiDAR) or passive (e.g., multispectral and hyperspectral) modes. The quality of data acquired by remotely sensed imaging sensors (both active and passive) is often degraded by a variety of noise types and artifacts. Image restoration, which is a vibrant field of research in the remote sensing community, is the task of recovering the true unknown image from the degraded observed image. Each imaging sensor induces unique noise types and artifacts into the observed image. This fact has led to the expansion of restoration techniques in different paths according to each sensor type. This review paper brings together the advances of image restoration techniques with particular focuses on synthetic aperture radar and hyperspectral images as the most active sub-fields of image restoration in the remote sensing community. We, therefore, provide a comprehensive, discipline-specific starting point for researchers at different levels (i.e., students, researchers, and senior researchers) willing to investigate the vibrant topic of data restoration by supplying sufficient detail and references. Additionally, this review paper accompanies a toolbox to provide a platform to encourage interested students and researchers in the field to further explore the restoration techniques and fast-forward the community. The toolboxes are provided in https://github.com/ImageRestorationToolbox. △ Less

Submitted 21 November, 2022; v1 submitted 1 July, 2021; originally announced July 2021.

Comments: Published in IEEE Geoscience and Remote Sensing Magazine

REXPACO: an algorithm for high contrast reconstruction of the circumstellar environment by angular differential imaging

Authors: Olivier Flasseur, Samuel Thé, Loïc Denis, Éric Thiébaut, Maud Langlois

Abstract: Aims. The purpose of this paper is to describe a new post-processing algorithm dedicated to the reconstruction of the spatial distribution of light received from off-axis sources, in particular from circumstellar disks. Methods. Built on the recent PACO algorithm dedicated to the detection of point-like sources, the proposed method is based on the local learning of patch covariances capturing th… ▽ More Aims. The purpose of this paper is to describe a new post-processing algorithm dedicated to the reconstruction of the spatial distribution of light received from off-axis sources, in particular from circumstellar disks. Methods. Built on the recent PACO algorithm dedicated to the detection of point-like sources, the proposed method is based on the local learning of patch covariances capturing the spatial fluctuations of the stellar leakages. From this statistical modeling, we develop a regularized image reconstruction algorithm (REXPACO) following an inverse problem approach based on a forward image formation model of the off-axis sources in the ADI sequences. Results. Injections of fake circumstellar disks in ADI sequences from the VLT/SPHERE-IRDIS instrument show that both the morphology and the photometry of the disks are better preserved by REXPACO compared to standard postprocessing methods like cADI. In particular, the modeling of the spatial covariances proves usefull in reducing typical ADI artifacts and in better disentangling the signal of these sources from the residual stellar contamination. The application to stars hosting circumstellar disks with various morphologies confirms the ability of REXPACO to produce images of the light distribution with reduced artifacts. Finally, we show how REXPACO can be combined with PACO to disentangle the signal of circumstellar disks from the signal of candidate point-like sources. Conclusions. REXPACO is a novel post-processing algorithm producing numerically deblurred images of the circumstellar environment. It exploits the spatial covariances of the stellar leakages and of the noise to efficiently eliminate this nuisance term. △ Less

Submitted 13 May, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Journal ref: A&A 651, A62 (2021)

Urban Surface Reconstruction in SAR Tomography by Graph-Cuts

Authors: Clément Rambour, Loïc Denis, Florence Tupin, Hélène Oriot, Yue Huang, Laurent Ferro-Famil

Abstract: SAR (Synthetic Aperture Radar) tomography reconstructs 3-D volumes from stacks of SAR images. High-resolution satellites such as TerraSAR-X provide images that can be combined to produce 3-D models. In urban areas, sparsity priors are generally enforced during the tomographic inversion process in order to retrieve the location of scatterers seen within a given radar resolution cell. However, such… ▽ More SAR (Synthetic Aperture Radar) tomography reconstructs 3-D volumes from stacks of SAR images. High-resolution satellites such as TerraSAR-X provide images that can be combined to produce 3-D models. In urban areas, sparsity priors are generally enforced during the tomographic inversion process in order to retrieve the location of scatterers seen within a given radar resolution cell. However, such priors often miss parts of the urban surfaces. Those missing parts are typically regions of flat areas such as ground or rooftops. This paper introduces a surface segmentation algorithm based on the computation of the optimal cut in a flow network. This segmentation process can be included within the 3-D reconstruction framework in order to improve the recovery of urban surfaces. Illustrations on a TerraSAR-X tomographic dataset demonstrate the potential of the approach to produce a 3-D model of urban surfaces such as ground, façades and rooftops. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Journal ref: Computer Vision and Image Understanding 188 (2019) 102791

The SPHERE infrared survey for exoplanets (SHINE) -- II. Observations, Data reduction and analysis Detection performances and early-results

Authors: M. Langlois, R. Gratton, A. -M. Lagrange, P. Delorme, A. Boccaletti, M. Bonnefoy, A. -L. Maire, D. Mesa, G. Chauvin, S. Desidera, A. Vigan, A. Cheetham, J. Hagelberg, M. Feldt, M. Meyer, P. Rubini, H. Le Coroller, F. Cantalloube, B. Biller, M. Bonavita, T. Bhowmik, W. Brandner, S. Daemgen, V. D'Orazi, O. Flasseur , et al. (96 additional authors not shown)

Abstract: Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to… ▽ More Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to detect and characterize the population of giant planets and brown dwarfs beyond the snow line around young, nearby stars. Combined with the survey completeness, our observations offer the opportunity to constrain the statistical properties (occurrence, mass and orbital distributions, dependency on the stellar mass) of these young giant planets.} {In this study, we present the observing and data analysis strategy, the ranking process of the detected candidates, and the survey performances for a subsample of 150 stars, which are representative of the full SHINE sample. The observations were conducted in an homogeneous way from February 2015 to February 2017 with the dedicated ground-based VLT/SPHERE instrument equipped with the IFS integral field spectrograph and the IRDIS dual-band imager covering a spectral range between 0.9 and 2.3 $μ$m. We used coronographic, angular and spectral differential imaging techniques to reach the best detection performances for this study down to the planetary mass regime.} △ Less

Submitted 5 March, 2021; originally announced March 2021.

Journal ref: A&A 651, A71 (2021)

Despeckling Sentinel-1 GRD images by deep learning and application to narrow river segmentation

Authors: Nicolas Gasnier, Emanuele Dalsasso, Loïc Denis, Florence Tupin

Abstract: This paper presents a despeckling method for Sentinel-1 GRD images based on the recently proposed framework "SAR2SAR": a self-supervised training strategy. Training the deep neural network on collections of Sentinel 1 GRD images leads to a despeckling algorithm that is robust to space-variant spatial correlations of speckle. Despeckled images improve the detection of structures like narrow rivers.… ▽ More This paper presents a despeckling method for Sentinel-1 GRD images based on the recently proposed framework "SAR2SAR": a self-supervised training strategy. Training the deep neural network on collections of Sentinel 1 GRD images leads to a despeckling algorithm that is robust to space-variant spatial correlations of speckle. Despeckled images improve the detection of structures like narrow rivers. We apply a detector based on exogenous information and a linear features detector and show that rivers are better segmented when the processing chain is applied to images pre-processed by our despeckling neural network. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Exploiting multi-temporal information for improved speckle reduction of Sentinel-1 SAR images by deep learning

Authors: Emanuele Dalsasso, Inès Meraoumia, Loïc Denis, Florence Tupin

Abstract: Deep learning approaches show unprecedented results for speckle reduction in SAR amplitude images. The wide availability of multi-temporal stacks of SAR images can improve even further the quality of denoising. In this paper, we propose a flexible yet efficient way to integrate temporal information into a deep neural network for speckle suppression. Archives provide access to long time-series of S… ▽ More Deep learning approaches show unprecedented results for speckle reduction in SAR amplitude images. The wide availability of multi-temporal stacks of SAR images can improve even further the quality of denoising. In this paper, we propose a flexible yet efficient way to integrate temporal information into a deep neural network for speckle suppression. Archives provide access to long time-series of SAR images, from which multi-temporal averages can be computed with virtually no remaining speckle fluctuations. The proposed method combines this multi-temporal average and the image at a given date in the form of a ratio image and uses a state-of-the-art neural network to remove the speckle in this ratio image. This simple strategy is shown to offer a noticeable improvement compared to filtering the original image without knowledge of the multi-temporal average. △ Less

Submitted 1 February, 2021; originally announced February 2021.

A review of deep-learning techniques for SAR image restoration

Authors: Loïc Denis, Emanuele Dalsasso, Florence Tupin

Abstract: The speckle phenomenon remains a major hurdle for the analysis of SAR images. The development of speckle reduction methods closely follows methodological progress in the field of image restoration. The advent of deep neural networks has offered new ways to tackle this longstanding problem. Deep learning for speckle reduction is a very active research topic and already shows restoration performance… ▽ More The speckle phenomenon remains a major hurdle for the analysis of SAR images. The development of speckle reduction methods closely follows methodological progress in the field of image restoration. The advent of deep neural networks has offered new ways to tackle this longstanding problem. Deep learning for speckle reduction is a very active research topic and already shows restoration performances that exceed that of the previous generations of methods based on the concepts of patches, sparsity, wavelet transform or total variation minimization. The objective of this paper is to give an overview of the most recent works and point the main research directions and current challenges of deep learning for SAR image restoration. △ Less

Submitted 28 January, 2021; originally announced January 2021.

The wavefront sensing making-of for THEMIS solar telescope

Authors: Michel Tallon, Éric Thiébaut, Maud Langlois, Bernard Gelly, Richard Douet, Clémentine Béchet, Loïc Denis, Gil Moretto

Abstract: An adaptive optics system with a single deformable mirror is being implemented on the THEMIS 90cm solar telescope. This system is designed to operate in the visible and is required to be as robust as possible in order to deliver the best possible correction in any atmospheric conditions, even if wavefronts are sensed on some low-contrast solar granulation. In extreme conditions, the images given b… ▽ More An adaptive optics system with a single deformable mirror is being implemented on the THEMIS 90cm solar telescope. This system is designed to operate in the visible and is required to be as robust as possible in order to deliver the best possible correction in any atmospheric conditions, even if wavefronts are sensed on some low-contrast solar granulation. In extreme conditions, the images given by the subapertures of the Shack-Hartmann wavefront sensor get randomly blurred in space, in the set of subapertures, and the distribution of blurred images is rapidly changing in time, some of them possibly fading away. The algorithms we have developed for such harsh conditions rely on inverse problem approach. As an example, with the gradients of the wavefronts, the wavefront sensor also estimates their errors, including their covariance. This information allows the control loop to promptly optimize itself to the fast varying conditions, both in space (wavefront reconstruction) and in time. A major constraint is to fit the calculations in a low-cost multi-core CPU. An overview of the algorithms in charge of implementing this strategy is presented, focusing on wavefront sensing. △ Less

Submitted 8 January, 2021; originally announced January 2021.

Journal ref: Adaptive Optics for Extremely Large Telescopes 6, Jun 2019, Qu{é}bec CIty, Canada

Quasilinear Stochastic PDEs with two obstacles: Probabilistic approach

Authors: Laurent Denis, Anis Matoussi, **g Zhang

Abstract: We prove an existence and uniqueness result for two-obstacle problem for quasilinear Stochastic PDEs (DOSPDEs for short). The method is based on the probabilistic interpretation of the solution by using the backward doubly stochastic differential equations (BDSDEs for short). We prove an existence and uniqueness result for two-obstacle problem for quasilinear Stochastic PDEs (DOSPDEs for short). The method is based on the probabilistic interpretation of the solution by using the backward doubly stochastic differential equations (BDSDEs for short). △ Less

Submitted 7 December, 2020; originally announced December 2020.

Venus Observations at 40 and 90 GHz with CLASS

Authors: Sumit Dahal, Michael K. Brewer, John W. Appel, Aamir Ali, Charles L. Bennett, Ricardo Bustos, Manwei Chan, David T. Chuss, Joseph Cleary, Jullianna D. Couto, Rahul Datta, Kevin L. Denis, Joseph Eimer, Francisco Espinoza, Thomas Essinger-Hileman, Dominik Gothe, Kathleen Harrington, Jeffrey Iuliano, John Karakla, Tobias A. Marriage, Sasha Novack, Carolina Núñez, Ivan L. Padilla, Lucas Parker, Matthew A. Petroff , et al. (8 additional authors not shown)

Abstract: Using the Cosmology Large Angular Scale Surveyor, we measure the disk-averaged absolute Venus brightness temperature to be 432.3 $\pm$ 2.8 K and 355.6 $\pm$ 1.3 K in the Q and W frequency bands centered at 38.8 and 93.7 GHz, respectively. At both frequency bands, these are the most precise measurements to date. Furthermore, we observe no phase dependence of the measured temperature in either band.… ▽ More Using the Cosmology Large Angular Scale Surveyor, we measure the disk-averaged absolute Venus brightness temperature to be 432.3 $\pm$ 2.8 K and 355.6 $\pm$ 1.3 K in the Q and W frequency bands centered at 38.8 and 93.7 GHz, respectively. At both frequency bands, these are the most precise measurements to date. Furthermore, we observe no phase dependence of the measured temperature in either band. Our measurements are consistent with a CO$_2$-dominant atmospheric model that includes trace amounts of additional absorbers like SO$_2$ and H$_2$SO$_4$. △ Less

Submitted 12 April, 2021; v1 submitted 23 October, 2020; originally announced October 2020.

Comments: 7 pages, 3 figures, published in PSJ

Journal ref: The Planetary Science Journal, 2:71 (6pp), 2021 April 12

SAR Image Despeckling by Deep Neural Networks: from a pre-trained model to an end-to-end training strategy

Authors: Emanuele Dalsasso, Xiangli Yang, Loïc Denis, Florence Tupin, Wen Yang

Abstract: Speckle reduction is a longstanding topic in synthetic aperture radar (SAR) images. Many different schemes have been proposed for the restoration of intensity SAR images. Among the different possible approaches, methods based on convolutional neural networks (CNNs) have recently shown to reach state-of-the-art performance for SAR image restoration. CNN training requires good training data: many pa… ▽ More Speckle reduction is a longstanding topic in synthetic aperture radar (SAR) images. Many different schemes have been proposed for the restoration of intensity SAR images. Among the different possible approaches, methods based on convolutional neural networks (CNNs) have recently shown to reach state-of-the-art performance for SAR image restoration. CNN training requires good training data: many pairs of speckle-free / speckle-corrupted images. This is an issue in SAR applications, given the inherent scarcity of speckle-free images. To handle this problem, this paper analyzes different strategies one can adopt, depending on the speckle removal task one wishes to perform and the availability of multitemporal stacks of SAR data. The first strategy applies a CNN model, trained to remove additive white Gaussian noise from natural images, to a recently proposed SAR speckle removal framework: MuLoG (MUlti-channel LOgarithm with Gaussian denoising). No training on SAR images is performed, the network is readily applied to speckle reduction tasks. The second strategy considers a novel approach to construct a reliable dataset of speckle-free SAR images necessary to train a CNN model. Finally, a hybrid approach is also analyzed: the CNN used to remove additive white Gaussian noise is trained on speckle-free SAR images. The proposed methods are compared to other state-of-the-art speckle removal filters, to evaluate the quality of denoising and to discuss the pros and cons of the different strategies. Along with the paper, we make available the weights of the trained network to allow its usage by other researchers. △ Less

Submitted 21 September, 2020; v1 submitted 28 June, 2020; originally announced June 2020.

Comments: Article accepted for publication on Remote Sensing, MDPI. Notebook with Colab compatibility is available at https://gitlab.telecom-paris.fr/RING/SAR-CNN

Journal ref: Remote Sens. 2020, 12(16), 2636

SAR2SAR: a semi-supervised despeckling algorithm for SAR images

Authors: Emanuele Dalsasso, Loïc Denis, Florence Tupin

Abstract: Speckle reduction is a key step in many remote sensing applications. By strongly affecting synthetic aperture radar (SAR) images, it makes them difficult to analyse. Due to the difficulty to model the spatial correlation of speckle, a deep learning algorithm with self-supervision is proposed in this paper: SAR2SAR. Multi-temporal time series are leveraged and the neural network learns to restore S… ▽ More Speckle reduction is a key step in many remote sensing applications. By strongly affecting synthetic aperture radar (SAR) images, it makes them difficult to analyse. Due to the difficulty to model the spatial correlation of speckle, a deep learning algorithm with self-supervision is proposed in this paper: SAR2SAR. Multi-temporal time series are leveraged and the neural network learns to restore SAR images by only looking at noisy acquisitions. To this purpose, the recently proposed noise2noise framework has been employed. The strategy to adapt it to SAR despeckling is presented, based on a compensation of temporal changes and a loss function adapted to the statistics of speckle. A study with synthetic speckle noise is presented to compare the performances of the proposed method with other state-of-the-art filters. Then, results on real images are discussed, to show the potential of the proposed algorithm. The code is made available to allow testing and reproducible research in this field. △ Less

Submitted 13 April, 2021; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: The manuscript is the accepted version of IEEE STARS. Code is made available at https://gitlab.telecom-paris.fr/RING/SAR2SAR

Journal ref: IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing (Early Access), 2020

Digitizing analogic spectrograms recorded by the Nançay Decameter Array on 35 mm film rolls from 1970 to 1990

Authors: Baptiste Cecconi, Laurent Lamy, Laurent Denis, Philippe Zarka, Agnès Fave, Marie-Pierre Issartel, Marie-Agnès Dubos, Corentin Louis, Pierre Le Sidaner, Véronique Stoll

Abstract: The Nançay Decameter Array (NDA), which has now passed 40 years old, acquires daily observations of Jovian and Solar low frequency radio emissions over a continuous spectrum ranging from 10 up to 100MHz, forming the largest database of LW radio observations of these two bodies. It also intermittently observed intense radio sources since its opening in 1977. Before that date, decametric observation… ▽ More The Nançay Decameter Array (NDA), which has now passed 40 years old, acquires daily observations of Jovian and Solar low frequency radio emissions over a continuous spectrum ranging from 10 up to 100MHz, forming the largest database of LW radio observations of these two bodies. It also intermittently observed intense radio sources since its opening in 1977. Before that date, decametric observations were conducted on the same site with an interferometer formed of a pair of log-periodic Yagi antennas mounted on mobile booms. These observations have been recorded with a series of analogic recorders (before 1990) and then digital receivers (after 1990), with increasing performances and sensitivities. The NDA scientific team recently retrieved and inventoried the archives of analogic data (35mm film rolls) covering two decades (1970 to 1990). We now plan to digitize those observations, in order to recover their scientific value and to include them into the currently operational database covering a time span starting in 1990 up to now, still adding new files every day. This modern and interoperable database has virtual observatory interfaces. It is a required element to foster scientific data exploitation, including Jovian and Solar data analysis over long timescales. We present the status of this project. △ Less

Submitted 27 March, 2020; originally announced March 2020.

Comments: Proceeding to the PV2018 conference - Adding value and preserving data, Rutherford Appleton Laboratory, Harwell Space Cluster (UK), 15th-17th May 2018

Two-year Cosmology Large Angular Scale Surveyor (CLASS) Observations: 40 GHz Telescope Pointing, Beam Profile, Window Function, and Polarization Performance

Authors: Zhilei Xu, Michael K. Brewer, Pedro Fluxá Rojas, Yunyang Li, Keisuke Osumi, Bastián Pradenas, Aamir Ali, John W. Appel, Charles L. Bennett, Ricardo Bustos, Manwei Chan, David T. Chuss, Joseph Cleary, Jullianna Denes Couto, Sumit Dahal, Rahul Datta, Kevin L. Denis, Rolando Dünner, Joseph R. Eimer, Thomas Essinger-Hileman, Dominik Gothe, Kathleen Harrington, Jeffrey Iuliano, John Karakla, Tobias A. Marriage , et al. (11 additional authors not shown)

Abstract: The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array that observes the cosmic microwave background (CMB) over 75% of the sky from the Atacama Desert, Chile, at frequency bands centered near 40, 90, 150, and 220 GHz. CLASS measures the large angular scale ($1^\circ\lesssimθ\leqslant 90^\circ$) CMB polarization to constrain the tensor-to-scalar ratio at the $r\sim0.01$ level and t… ▽ More The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array that observes the cosmic microwave background (CMB) over 75% of the sky from the Atacama Desert, Chile, at frequency bands centered near 40, 90, 150, and 220 GHz. CLASS measures the large angular scale ($1^\circ\lesssimθ\leqslant 90^\circ$) CMB polarization to constrain the tensor-to-scalar ratio at the $r\sim0.01$ level and the optical depth to last scattering to the sample variance limit. This paper presents the optical characterization of the 40 GHz telescope during its first observation era, from 2016 September to 2018 February. High signal-to-noise observations of the Moon establish the pointing and beam calibration. The telescope boresight pointing variation is $<0.023^\circ$ ($<1.6$% of the beam's full width at half maximum (FWHM)). We estimate beam parameters per detector and in aggregate, as in the CMB survey maps. The aggregate beam has an FWHM of $1.579^\circ\pm.001^\circ$ and a solid angle of $838 \pm 6\ μ{\rm sr}$, consistent with physical optics simulations. The corresponding beam window function has a sub-percent error per multipole at $\ell < 200$. An extended $90^\circ$ beam map reveals no significant far sidelobes. The observed Moon polarization shows that the instrument polarization angles are consistent with the optical model and that the temperature-to-polarization leakage fraction is $<10^{-4}$ (95% C.L.). We find that the Moon-based results are consistent with measurements of M42, RCW 38, and Tau A from CLASS's CMB survey data. In particular, Tau A measurements establish degree-level precision for instrument polarization angles. △ Less

Submitted 6 April, 2020; v1 submitted 11 November, 2019; originally announced November 2019.

Comments: 32 pages, 24 figures, published in ApJ

Journal ref: The Astrophysical Journal, 891:134 (25pp), 2020 March 10

MASER: A Science Ready Toolbox for Low Frequency Radio Astronomy

Authors: Baptiste Cecconi, Alan Loh, Pierre Le Sidaner, Renaud Savalle, Xavier Bonnin, Quynh Nhu Nguyen, Sonny Lion, Albert Shih, Stéphane Aicardi, Philippe Zarka, Corentin Louis, Andrée Coffre, Laurent Lamy, Laurent Denis, Jean-Mathias Grießmeier, Jeremy Faden, Chris Piker, Nicolas André, Vincent Génot, Stéphane Erard, Joseph N Mafi, Todd A King, Jim Sky, Markus Demleitner

Abstract: MASER (Measurements, Analysis, and Simulation of Emission in the Radio range) is a comprehensive infrastructure dedicated to time-dependent low frequency radio astronomy (up to about 50 MHz). The main radio sources observed in this spectral range are the Sun, the magnetized planets (Earth, Jupiter, Saturn), and our Galaxy, which are observed either from ground or space. Ground observatories can ca… ▽ More MASER (Measurements, Analysis, and Simulation of Emission in the Radio range) is a comprehensive infrastructure dedicated to time-dependent low frequency radio astronomy (up to about 50 MHz). The main radio sources observed in this spectral range are the Sun, the magnetized planets (Earth, Jupiter, Saturn), and our Galaxy, which are observed either from ground or space. Ground observatories can capture high resolution data streams with a high sensitivity. Conversely, space-borne instruments can observe below the ionospheric cut-off (at about 10 MHz) and can be placed closer to the studied object. Several tools have been developed in the last decade for sharing space physics data. Data visualization tools developed by various institutes are available to share, display and analyse space physics time series and spectrograms. The MASER team has selected a sub-set of those tools and applied them to low frequency radio astronomy. MASER also includes a Python software library for reading raw data from agency archives. △ Less

Submitted 25 February, 2020; v1 submitted 1 February, 2019; originally announced February 2019.

Comments: Submitted to Data Science Journal special issue after PV2018 conference

Fabrication of phononic filter structures for far-IR/sub-mm detector applications

Authors: Kevin L. Denis, Karwan Rostem, Marco A. Sagliocca, Elissa H. Williams, Edward J. Wollack

Abstract: A photon noise limited sub-mm/far-IR cold telescope in space will require detectors with noise equivalent power (NEP) less than 1x10-19 W/Hz1/2 for imaging applications and at least an order of magnitude lower for spectroscopic studies. The detector NEP can be reduced by lowering the operation temperature and improving the thermal isolation between the bolometer and a heat bath. We report on the f… ▽ More A photon noise limited sub-mm/far-IR cold telescope in space will require detectors with noise equivalent power (NEP) less than 1x10-19 W/Hz1/2 for imaging applications and at least an order of magnitude lower for spectroscopic studies. The detector NEP can be reduced by lowering the operation temperature and improving the thermal isolation between the bolometer and a heat bath. We report on the fabrication of membrane isolated transition edge sensor bolometers incorporating compact (<50 μm) thermal isolation beams based on phononic filters. Phononic filters are created by etching quasi-periodic nanoscale structures into supporting thermo-mechanical beams. The cross-sectional dimensions of the etched features are less than the thermal wavelength at the operating temperature, enabling coherent phonon transport to take place in one dimension. The phonon stop-band can be tuned by adjusting the scale of the quasi-periodic structures. Cascading multiple filter stages can increase bandwidth and provide improved thermal isolation similar to the function of a multi-stage electrical filter. We describe the fabrication of AlMn based transition edge sensor bolometers on silicon and silicon nitride membranes isolated by one- and two-dimensional phononic filters. The phononic filters are patterned through electron beam lithography and isolated with deep reactive ion etching. △ Less

Submitted 20 December, 2018; originally announced December 2018.

Comments: SPIE, Photonics West, 7 pages, 4 figures,

SiAl Alloy Feedhorn Arrays: Material Properties, Feedhorn Design, and Astrophysical Applications

Authors: Aamir M. Ali, Thomas Essinger-Hileman, Tobias Marriage, John W. Appel, Charles L. Bennnett, Matthew Berkeley, Berhanu Bulcha, Sumit Dahal, Kevin L. Denis, Karwan Rostem, Kongpop U-Yen, Edward J. Wollack, Lingzhen Zeng

Abstract: We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si… ▽ More We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si devices, or of silicon, which avoids the mismatch but is difficult to directly machine. CE7 exhibits properties of both Si and Al, which makes it uniquely well suited for this application. We measure CE7 to a) superconduct below a critical transition temperature, $T_c$, $\sim$ 1.2 K b) have a thermal contraction profile much closer to Si than metals, which enables simple mating, and c) have a low thermal conductivity which can be improved by Au-plating. Our investigations also demonstrate that CE7 can be machined well enough to fabricate small structures, such as \#0-80 threaded holes, to tight tolerances ($\sim$ 25 $μ$m) in contrast with pure silicon and similar substrates. We have fabricated CE7 baseplates being deployed in the 93 GHz polarimeteric focal planes used in the Cosmology Large Angular Scale Surveyor (CLASS). We also report on the development of smooth-walled feedhorn arrays made of CE7 that will be used in a focal plane of dichroic 150/220 GHz detectors for the CLASS High-Frequency Camera. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: Keywords: CE7, SiAl alloy, Cryogenics, Material Properties, Superconductor, Thermal Contraction, CTE, Waveguides, Feedhorns, Submm Detectors, Millimeter Detectors, CLASS, CMB polarization

Decameter Type III Bursts with Changing Frequency Drift-Rate Signs

Authors: V. N. Melnik, A. I. Brazhenko, A. A. Konovalenko, C. Briand, V. V. Dorovskyy, P. Zarka, A. V. Frantsuzenko, H. O. Rucker, B. P. Rutkevych, M. Panchenko, L. Denis, T. Zaqarashvili, B. Shergelashvili

Abstract: We discuss properties of type III bursts which change sign of their drift rate from negative to positive and vice versa. Moreover such bursts may change sign of their drift rates more than once. These specific type III bursts were observed simultaneously by radio telescopes UTR-2, URAN-2 and NDA in frequency band 8-41 MHz. The negative drift rates of these bursts are close to those of usual decame… ▽ More We discuss properties of type III bursts which change sign of their drift rate from negative to positive and vice versa. Moreover such bursts may change sign of their drift rates more than once. These specific type III bursts were observed simultaneously by radio telescopes UTR-2, URAN-2 and NDA in frequency band 8-41 MHz. The negative drift rates of these bursts are close to those of usual decameter type III bursts and variate from -0.84 MHz/s to -5.56 MHz/s. The positive drift rates of specific type III bursts vary in the wider range from 0.44MHz/s to 12 MHz/s. Unlike inverted U-bursts these type III bursts still drift from the high frequencies to the low frequencies in spite of the change of the drift rates signs. Our basic explanation of the positive drift rate of these type III burst differs from the common assumption that positive drift rates of Type III bursts are connected with electron beam propagation towards the Sun. We propose that, even if electron beams move outward from the Sun, they can generate type III bursts with positive drift rates if in some regions of the solar corona the group velocities of type III radio emissions are lower than the velocities of the electron beams. △ Less

Submitted 22 February, 2018; originally announced February 2018.

Comments: 11 pages, 5 figures

Journal ref: Solar Physics, Volume 290, Issue 1, pp.193-203 (2015)

French SKA White Book - The French Community towards the Square Kilometre Array

Authors: F. Acero, J. -T. Acquaviva, R. Adam, N. Aghanim, M. Allen, M. Alves, R. Ammanouil, R. Ansari, A. Araudo, E. Armengaud, B. Ascaso, E. Athanassoula, D. Aubert, S. Babak, A. Bacmann, A. Banday, K. Barriere, F. Bellossi, J. -P. Bernard, M. G. Bernardini, M. Béthermin, E. Blanc, L. Blanchet, J. Bobin, S. Boissier , et al. (153 additional authors not shown)

Abstract: The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive p… ▽ More The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive phases. From its Phase 1, the SKA will be one of the most formidable scientific machines ever deployed by mankind, and by far the most impressive in terms of data throughput and required computing power. With the participation of almost 200 authors from forty research institutes and six private companies, the publication of this French SKA white paper illustrates the strong involvement in the SKA project of the French astronomical community and of a rapidly growing number of major scientific and technological players in the fields of Big Data, high performance computing, energy production and storage, as well as system integration. △ Less

Submitted 28 March, 2018; v1 submitted 19 December, 2017; originally announced December 2017.

Comments: Editor in chief: C. Ferrari; Editors: M. Alves, S. Bosse, S. Corbel, A. Ferrari, K. Ferrière, S. Gauffre, E. Josselin, G. Lagache, S. Lambert, G. Marquette, J.-M. Martin, M.-A. Miville-Deschênes, L. Montier, B. Semelin, G. Theureau, S. Vergani, N. Vilmer, P. Zarka; Original file with high resolution figures at SKA-France link: https://ska-france.oca.eu/images/SKA-France-Media/FWB_051017.pdf

Accelerating GMM-based patch priors for image restoration: Three ingredients for a 100$\times$ speed-up

Authors: Shibin Parameswaran, Charles-Alban Deledalle, Loïc Denis, Truong Q. Nguyen

Abstract: Image restoration methods aim to recover the underlying clean image from corrupted observations. The Expected Patch Log-likelihood (EPLL) algorithm is a powerful image restoration method that uses a Gaussian mixture model (GMM) prior on the patches of natural images. Although it is very effective for restoring images, its high runtime complexity makes EPLL ill-suited for most practical application… ▽ More Image restoration methods aim to recover the underlying clean image from corrupted observations. The Expected Patch Log-likelihood (EPLL) algorithm is a powerful image restoration method that uses a Gaussian mixture model (GMM) prior on the patches of natural images. Although it is very effective for restoring images, its high runtime complexity makes EPLL ill-suited for most practical applications. In this paper, we propose three approximations to the original EPLL algorithm. The resulting algorithm, which we call the fast-EPLL (FEPLL), attains a dramatic speed-up of two orders of magnitude over EPLL while incurring a negligible drop in the restored image quality (less than 0.5 dB). We demonstrate the efficacy and versatility of our algorithm on a number of inverse problems such as denoising, deblurring, super-resolution, inpainting and devignetting. To the best of our knowledge, FEPLL is the first algorithm that can competitively restore a 512x512 pixel image in under 0.5s for all the degradations mentioned above without specialized code optimizations such as CPU parallelization or GPU implementation. △ Less

Submitted 23 October, 2017; originally announced October 2017.

The CODALEMA/EXTASIS experiment: Contributions to the 35th International Cosmic Ray Conference (ICRC 2017)

Authors: Hervé Carduner, Didier Charrier, Richard Dallier, Laurent Denis, Antony Escudie, Daniel García-Fernández, Florian Gaté, Alain Lecacheux, Vincent Marin, Lilian Martin, Benoît Revenu, Matias Tueros

Abstract: Contributions of the CODALEMA/EXTASIS experiment to the 35th International Cosmic Ray Conference, 12-20 July 2017, Busan, South Korea. Contributions of the CODALEMA/EXTASIS experiment to the 35th International Cosmic Ray Conference, 12-20 July 2017, Busan, South Korea. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Comments: 7 proceedings; will appear in PoS(ICRC2017)

1977-2017: 40 years of decametric observations of Jupiter and the Sun with the Nancay Decameter Array

Authors: L. Lamy, P. Zarka, B. Cecconi, L. -K. Klein, S. Masson, L. Denis, A. Coffre, C. Viou

Abstract: The Nancay Decameter Array (NDA) routinely observes low frequency (10-100 MHz) radio emissions of Jupiter and the Sun since 4 decades. The NDA observations, acquired with a variety of receivers with increasing performances, were the basis for numerous studies of jovian and solar radio emissions and now form a unique long-term database spanning >3 solar cycles and jovian revolutions. In addition, t… ▽ More The Nancay Decameter Array (NDA) routinely observes low frequency (10-100 MHz) radio emissions of Jupiter and the Sun since 4 decades. The NDA observations, acquired with a variety of receivers with increasing performances, were the basis for numerous studies of jovian and solar radio emissions and now form a unique long-term database spanning >3 solar cycles and jovian revolutions. In addition, the NDA historically brought a fruitful support to space-based radio observatories of the heliosphere, to multi-wavelength analyses of solar activity and contributes to the development of space weather services. After having summarized the NDA characteristics, this article presents latest instrumental and database developments, some recent scientific results and perspectives for the next decade. △ Less

Submitted 10 July, 2018; v1 submitted 12 September, 2017; originally announced September 2017.

Comments: Refereed article

MSC Class: 85-06

MuLoG, or How to apply Gaussian denoisers to multi-channel SAR speckle reduction?

Authors: Charles-Alban Deledalle, Loïc Denis, Sonia Tabti, Florence Tupin

Abstract: Speckle reduction is a longstanding topic in synthetic aperture radar (SAR) imaging. Since most current and planned SAR imaging satellites operate in polarimetric, interferometric or tomographic modes, SAR images are multi-channel and speckle reduction techniques must jointly process all channels to recover polarimetric and interferometric information. The distinctive nature of SAR signal (complex… ▽ More Speckle reduction is a longstanding topic in synthetic aperture radar (SAR) imaging. Since most current and planned SAR imaging satellites operate in polarimetric, interferometric or tomographic modes, SAR images are multi-channel and speckle reduction techniques must jointly process all channels to recover polarimetric and interferometric information. The distinctive nature of SAR signal (complex-valued, corrupted by multiplicative fluctuations) calls for the development of specialized methods for speckle reduction. Image denoising is a very active topic in image processing with a wide variety of approaches and many denoising algorithms available, almost always designed for additive Gaussian noise suppression. This paper proposes a general scheme, called MuLoG (MUlti-channel LOgarithm with Gaussian denoising), to include such Gaussian denoisers within a multi-channel SAR speckle reduction technique. A new family of speckle reduction algorithms can thus be obtained, benefiting from the ongoing progress in Gaussian denoising, and offering several speckle reduction results often displaying method-specific artifacts that can be dismissed by comparison between results. △ Less

Submitted 18 April, 2017; originally announced April 2017.

Digital receivers for low-frequency radio telescopes UTR-2, URAN, GURT

Authors: V. Zakharenko, A. Konovalenko, P. Zarka, O. Ulyanov, M. Sidorchuk, S. Stepkin, V. Koliadin, N. Kalinichenko, A. Stanislavsky, V. Dorovskyy, V. Shepelev, I. Bubnov, S. Yerin, V. Melnik, A. Koval, N. Shevchuk, I. Vasylieva, K. Mylostna, A. Shevtsova, A. Skoryk, I. Kravtsov, Y. Volvach, M. Plakhov, N. Vasilenko, Y. Vasylkivskyi , et al. (27 additional authors not shown)

Abstract: This paper describes digital radio astronomical receivers used for decameter and meter wavelength observations. This paper describes digital radio astronomical receivers used for decameter and meter wavelength observations. Since 1998, digital receivers performing on-the-fly dynamic spectrum calculations or waveform data recording without data loss have been used at the UTR-2 radio telescope, the… ▽ More This paper describes digital radio astronomical receivers used for decameter and meter wavelength observations. This paper describes digital radio astronomical receivers used for decameter and meter wavelength observations. Since 1998, digital receivers performing on-the-fly dynamic spectrum calculations or waveform data recording without data loss have been used at the UTR-2 radio telescope, the URAN VLBI system, and the GURT new generation radio telescope. Here we detail these receivers developed for operation in the strong interference environment that prevails in the decameter wavelength range. Data collected with these receivers allowed us to discover numerous radio astronomical objects and phenomena at low frequencies, a summary of which is also presented. △ Less

Submitted 13 March, 2017; originally announced March 2017.

Comments: 24 pages, 15 figures

Multimode bolometer development for the PIXIE instrument

Authors: Peter C. Nagler, Kevin T. Crowley, Kevin L. Denis, Archana M. Devasia, Dale J. Fixsen, Alan J. Kogut, George Manos, Scott Porter, Thomas R. Stevenson

Abstract: The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept designed to measure the polarization and absolute intensity of the cosmic microwave background. In the following, we report on the design, fabrication, and performance of the multimode polarization-sensitive bolometers for PIXIE, which are based on silicon thermistors. In particular we focus on several recent advances i… ▽ More The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept designed to measure the polarization and absolute intensity of the cosmic microwave background. In the following, we report on the design, fabrication, and performance of the multimode polarization-sensitive bolometers for PIXIE, which are based on silicon thermistors. In particular we focus on several recent advances in the detector design, including the implementation of a scheme to greatly raise the frequencies of the internal vibrational modes of the large-area, low-mass optical absorber structure consisting of a grid of micromachined, ion-implanted silicon wires. With $\sim30$ times the absorbing area of the spider-web bolometers used by Planck, the tensioning scheme enables the PIXIE bolometers to be robust in the vibrational and acoustic environment at launch of the space mission. More generally, it could be used to reduce microphonic sensitivity in other types of low temperature detectors. We also report on the performance of the PIXIE bolometers in a dark cryogenic environment. △ Less

Submitted 14 November, 2016; originally announced November 2016.

Comments: 10 pages, 7 figures

Journal ref: Proc. SPIE 9914, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, 99141A (July 19, 2016)

Superconducting Vacuum-Gap Crossovers for High Performance Microwave Applications

Authors: Kevin L. Denis, Ari D. Brown, Meng-** Chang, Ron Hu, Kongpop U-Yen, Edward Wollack

Abstract: The design and fabrication of low-loss wide-bandwidth superconducting vacuum-gap crossovers for high performance millimeter wave applications are described. In order to reduce ohmic and parasitic losses at millimeter wavelengths a vacuum gap is preferred relative to dielectric spacer. Here, vacuum-gap crossovers were realized by using a sacrificial polymer layer followed by niobium sputter deposit… ▽ More The design and fabrication of low-loss wide-bandwidth superconducting vacuum-gap crossovers for high performance millimeter wave applications are described. In order to reduce ohmic and parasitic losses at millimeter wavelengths a vacuum gap is preferred relative to dielectric spacer. Here, vacuum-gap crossovers were realized by using a sacrificial polymer layer followed by niobium sputter deposition optimized for coating coverage over an underlying niobium signal layer. Both coplanar waveguide and microstrip crossover topologies have been explored in detail. The resulting fabrication process is compatible with a bulk micro-machining process for realizing waveguide coupled detectors, which includes sacrificial wax bonding, and wafer backside deep reactive ion etching for creation of leg isolated silicon membrane structures. Release of the vacuum gap structures along with the wax bonded wafer after DRIE is implemented in the same process step used to complete the detector fabrication △ Less

Submitted 4 October, 2016; originally announced October 2016.

Comments: 4 pages, 6 figures

Silicon-Based Antenna-Coupled Polarization-Sensitive Millimeter-Wave Bolometer Arrays for Cosmic Microwave Background Instruments

Authors: Karwan Rostem, Aamir Ali, John W. Appel, Charles L. Bennett, Ari Brown, Meng-** Chang, David T. Chuss, Felipe A. Colazo, Nick Costen, Kevin L. Denis, Tom Essinger-Hileman, Ron Hu, Tobias A. Marriage, Samuel H. Moseley, Thomas R. Stevenson, Kongpop U-Yen, Edward J. Wollack, Zhilei Xu

Abstract: We describe feedhorn-coupled polarization-sensitive detector arrays that utilize monocrystalline silicon as the dielectric substrate material. Monocrystalline silicon has a low-loss tangent and repeatable dielectric constant, characteristics that are critical for realizing efficient and uniform superconducting microwave circuits. An additional advantage of this material is its low specific heat. I… ▽ More We describe feedhorn-coupled polarization-sensitive detector arrays that utilize monocrystalline silicon as the dielectric substrate material. Monocrystalline silicon has a low-loss tangent and repeatable dielectric constant, characteristics that are critical for realizing efficient and uniform superconducting microwave circuits. An additional advantage of this material is its low specific heat. In a detector pixel, two Transition-Edge Sensor (TES) bolometers are antenna-coupled to in-band radiation via a symmetric planar orthomode transducer (OMT). Each orthogonal linear polarization is coupled to a separate superconducting microstrip transmission line circuit. On-chip filtering is employed to both reject out-of-band radiation from the upper band edge to the gap frequency of the niobium superconductor, and to flexibly define the bandwidth for each TES to meet the requirements of the application. The microwave circuit is compatible with multi-chroic operation. Metalized silicon platelets are used to define the backshort for the waveguide probes. This micro-machined structure is also used to mitigate the coupling of out-of-band radiation to the microwave circuit. At 40 GHz, the detectors have a measured efficiency of 90%. In this paper, we describe the development of the 90 GHz detector arrays that will be demonstrated using the Cosmology Large Angular Scale Surveyor (CLASS) ground-based telescope. △ Less

Submitted 30 August, 2016; originally announced August 2016.

Fabrication of Feedhorn-Coupled Transition Edge Sensor Arrays for Measurement of the Cosmic Microwave Background Polarization

Authors: Kevin L. Denis, Aamir Ali, John W. Appel, Charles L. Bennett, Meng-** Chang, David T. Chuss, Felipe Colazo, Nicholas Costen, Thomas Essinger-Hileman, Ron Hu, Tobias Marriage, Karwan Rostem, Kongpop U-Yen, Edward J. Wollack

Abstract: Characterization of the minute cosmic microwave background polarization signature requires multi-frequency, high-throughput precision instrument systems. We have previously described the detector fabrication of a 40 GHz focal plane and now describe the fabrication of detector modules for measurement of the CMB at 90 GHz. The 90 GHz detectors are a scaled version of the 40 GHz architecture where, d… ▽ More Characterization of the minute cosmic microwave background polarization signature requires multi-frequency, high-throughput precision instrument systems. We have previously described the detector fabrication of a 40 GHz focal plane and now describe the fabrication of detector modules for measurement of the CMB at 90 GHz. The 90 GHz detectors are a scaled version of the 40 GHz architecture where, due to smaller size detectors, we have implemented a modular (wafer level) rather than the chip-level architecture. The new fabrication process utilizes the same design rules with the added challenge of increased wiring density to the 74 TES's as well as a new wafer level hybridization procedure. The hexagonally shaped modules are tile-able, and as such, can be used to form the large focal planes required for a space-based CMB polarimeter. The detectors described here will be deployed in two focal planes with 7 modules each in the Johns Hopkins University led ground-based Cosmology Large Angular Scale Surveyor (CLASS) telescope. △ Less

Submitted 17 November, 2015; v1 submitted 16 November, 2015; originally announced November 2015.

Comments: 7 pages, 4 figures, Presented at Low Temperature Detectors Conference Grenoble France 2015

Cosmology Large Angular Scale Surveyor (CLASS) Focal Plane Development

Authors: D. T. Chuss, A. Ali, M. Amiri, J. Appel, C. L. Bennett, F. Colazo, K. L. Denis, R. Dünner, T. Essinger-Hileman, J. Eimer, P. Fluxa, D. Gothe, M. Halpern, K. Harrington, G. Hilton, G. Hinshaw, J. Hubmayr, J. Iuliano, T. A. Marriage, N. Miller, S. H. Moseley, G. Mumby, M. Petroff, C. Reintsema, K. Rostem , et al. (6 additional authors not shown)

Abstract: The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe $\sim$70% of the sky. A variable-delay polarization modulator (VPM) modulates the polarization at $\sim$10 Hz to suppress the 1/f noise of the atmosphere and en… ▽ More The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe $\sim$70% of the sky. A variable-delay polarization modulator (VPM) modulates the polarization at $\sim$10 Hz to suppress the 1/f noise of the atmosphere and enable the measurement of the large angular scale polarization modes. The measurement of the inflationary signal across angular scales that span both the recombination and reionization features allows a test of the predicted shape of the polarized angular power spectra in addition to a measurement of the energy scale of inflation. CLASS is an array of telescopes covering frequencies of 38, 93, 148, and 217 GHz. These frequencies straddle the foreground minimum and thus allow the extraction of foregrounds from the primordial signal. Each focal plane contains feedhorn-coupled transition-edge sensors that simultaneously detect two orthogonal linear polarizations. The use of single-crystal silicon as the dielectric for the on-chip transmission lines enables both high efficiency and uniformity in fabrication. Integrated band definition has been implemented that both controls the bandpass of the single mode transmission on the chip and prevents stray light from coupling to the detectors. △ Less

Submitted 13 November, 2015; originally announced November 2015.

Comments: 7 pages, 5 figures, accepted by the Journal of Low Temperature Physics

Wide-Stopband Aperiodic Phononic Filters

Authors: K. Rostem, D. T. Chuss, K. L. Denis, E. J. Wollack

Abstract: We demonstrate that a phonon stopband can be synthesized from an aperiodic structure comprising a discrete set of phononic filter stages. Each element of the set has a dispersion relation that defines a complete bandgap when calculated under a Bloch boundary condition. Hence, the effective stopband width in an aperiodic phononic filter (PnF) may readily exceed that of a phononic crystal with a sin… ▽ More We demonstrate that a phonon stopband can be synthesized from an aperiodic structure comprising a discrete set of phononic filter stages. Each element of the set has a dispersion relation that defines a complete bandgap when calculated under a Bloch boundary condition. Hence, the effective stopband width in an aperiodic phononic filter (PnF) may readily exceed that of a phononic crystal with a single lattice constant or a coherence scale. With simulations of multi-moded phononic waveguides, we discuss the effects of finite geometry and mode-converting junctions on the phonon transmission in PnFs. The principles described may be utilized to form a wide stopband in acoustic and surface wave media. Relative to the quantum of thermal conductance for a uniform mesoscopic beam, a PnF with a stopband covering 1.6-10.4 GHz is estimated to reduce the thermal conductance by an order of magnitude at 75mK. △ Less

Submitted 14 March, 2016; v1 submitted 13 September, 2015; originally announced September 2015.

Scalable background-limited polarization-sensitive detectors for mm-wave applications

Authors: Karwan Rostem, Aamir Ali, John W. Appel, Charles L. Bennett, David T. Chuss, Felipe A. Colazo, Erik Crowe, Kevin L. Denis, Tom Essinger-Hileman, Tobias A. Marriage, Samuel H. Moseley, Thomas R. Stevenson, Deborah W. Towner, Kongpop U-Yen, Edward J. Wollack

Abstract: We report on the status and development of polarization-sensitive detectors for millimeter-wave applications. The detectors are fabricated on single-crystal silicon, which functions as a low-loss dielectric substrate for the microwave circuitry as well as the supporting membrane for the Transition-Edge Sensor (TES) bolometers. The orthomode transducer (OMT) is realized as a symmetric structure and… ▽ More We report on the status and development of polarization-sensitive detectors for millimeter-wave applications. The detectors are fabricated on single-crystal silicon, which functions as a low-loss dielectric substrate for the microwave circuitry as well as the supporting membrane for the Transition-Edge Sensor (TES) bolometers. The orthomode transducer (OMT) is realized as a symmetric structure and on-chip filters are employed to define the detection bandwidth. A hybridized integrated enclosure reduces the high-frequency THz mode set that can couple to the TES bolometers. An implementation of the detector architecture at Q-band achieves 90% efficiency in each polarization. The design is scalable in both frequency coverage, 30-300 GHz, and in number of detectors with uniform characteristics. Hence, the detectors are desirable for ground-based or space-borne instruments that require large arrays of efficient background-limited cryogenic detectors. △ Less

Submitted 20 August, 2014; originally announced August 2014.

Comments: 7 pages, 3 figures, Presented at SPIE Astronomical Telescopes and Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. To be published in Proceedings of SPIE Volume 9153

Precision control of thermal transport in cryogenic single-crystal silicon devices

Authors: Karwan Rostem, David T. Chuss, Felipe A. Colazo, Erik J. Crowe, Kevin L. Denis, Nathan P. Lourie, Samuel H. Moseley, Thomas R. Stevenson, Edward J. Wollack

Abstract: We report on the diffusive-ballistic thermal conductance of multi-moded single-crystal silicon beams measured below 1 K. It is shown that the phonon mean-free-path $\ell$ is a strong function of the surface roughness characteristics of the beams. This effect is enhanced in diffuse beams with lengths much larger than $\ell$, even when the surface is fairly smooth, 5-10 nm rms, and the peak thermal… ▽ More We report on the diffusive-ballistic thermal conductance of multi-moded single-crystal silicon beams measured below 1 K. It is shown that the phonon mean-free-path $\ell$ is a strong function of the surface roughness characteristics of the beams. This effect is enhanced in diffuse beams with lengths much larger than $\ell$, even when the surface is fairly smooth, 5-10 nm rms, and the peak thermal wavelength is 0.6 $μ$m. Resonant phonon scattering has been observed in beams with a pitted surface morphology and characteristic pit depth of 30 nm. Hence, if the surface roughness is not adequately controlled, the thermal conductance can vary significantly for diffuse beams fabricated across a wafer. In contrast, when the beam length is of order $\ell$, the conductance is dominated by ballistic transport and is effectively set by the beam area. We have demonstrated a uniformity of $\pm$8% in fractional deviation for ballistic beams, and this deviation is largely set by the thermal conductance of diffuse beams that support the micro-electro-mechanical device and electrical leads. In addition, we have found no evidence for excess specific heat in single-crystal silicon membranes. This allows for the precise control of the device heat capacity with normal metal films. We discuss the results in the context of the design and fabrication of large-format arrays of far-infrared and millimeter wavelength cryogenic detectors. △ Less

Submitted 5 March, 2014; originally announced March 2014.

The existence and uniqueness result for Quasilinear Stochastic PDEs with Obstacle under weaker integrability conditions

Authors: Laurent Denis, Anis Matoussi, **g Zhang

Abstract: We prove an existence and uniqueness result for quasilinear Stochastic PDEs with Obstacle (in short OSPDE) under a weaker integrability condition on the coefficient and the barrier. We prove an existence and uniqueness result for quasilinear Stochastic PDEs with Obstacle (in short OSPDE) under a weaker integrability condition on the coefficient and the barrier. △ Less

Submitted 16 April, 2013; originally announced April 2013.

Comments: formerly part of arXiv:1210.3445. arXiv admin note: text overlap with arXiv:1301.1221, arXiv:1202.3296

MSC Class: 60H15; 35R60; 31B150

Effect of pairing on nuclear dynamic

Authors: Scamps Guillaume, Lacroix Denis

Abstract: The effect of pairing on small and large amplitude dynamics is discussed. Pairing correlation is treated in a fully microscopic transport theory using a simplified BCS version of the Time-Dependent Hartree-Fock Bogolyubov (TDHFB) theory. The approach is applied to study the Giant Dipole and Giant Quadrupole Resonance in spherical and/or deformed magnesium isotopes showing very good agreement with… ▽ More The effect of pairing on small and large amplitude dynamics is discussed. Pairing correlation is treated in a fully microscopic transport theory using a simplified BCS version of the Time-Dependent Hartree-Fock Bogolyubov (TDHFB) theory. The approach is applied to study the Giant Dipole and Giant Quadrupole Resonance in spherical and/or deformed magnesium isotopes showing very good agreement with QRPA theory. The present framework also provides a consistent approach to describe nuclear reactions around the Coulomb barrier. As an illustration, the influence of pairing correlations on multi-nucleon transfer is studied for reactions at sub-barrier energy. △ Less

Submitted 9 April, 2013; originally announced April 2013.

Comments: 9 pages, 6 figures, Proceedings of the 51st International Winter Meeting on Nuclear Physics, 21-25 January 2013, Bormio (Italy)

Template matching with noisy patches: A contrast-invariant GLR test

Authors: Charles-Alban Deledalle, Loïc Denis, Florence Tupin

Abstract: Matching patches from a noisy image to atoms in a dictionary of patches is a key ingredient to many techniques in image processing and computer vision. By representing with a single atom all patches that are identical up to a radiometric transformation, dictionary size can be kept small, thereby retaining good computational efficiency. Identification of the atom in best match with a given noisy pa… ▽ More Matching patches from a noisy image to atoms in a dictionary of patches is a key ingredient to many techniques in image processing and computer vision. By representing with a single atom all patches that are identical up to a radiometric transformation, dictionary size can be kept small, thereby retaining good computational efficiency. Identification of the atom in best match with a given noisy patch then requires a contrast-invariant criterion. In the light of detection theory, we propose a new criterion that ensures contrast invariance and robustness to noise. We discuss its theoretical grounding and assess its performance under Gaussian, gamma and Poisson noises. △ Less

Submitted 25 March, 2013; originally announced March 2013.