-
Bright-Dark Exciton Interplay Evidenced by Spin Polarization in CdSe/CdMnS Nanoplatelets
Authors:
Elena V. Shornikova,
Dmitri R. Yakovlev,
Danil O. Tolmachev,
Mikhail A. Prosnikov,
Peter C. M. Christianen,
Sushant Shendre,
Furkan Isik,
Savas Delikanli,
Hilmi Volkan Demir,
Manfred Bayer
Abstract:
Diluted magnetic semiconductor (DMS) colloidal nanocrystals demonstrate remarkable magneto-optical properties. However, the behavior of circular polarization of their emission in high magnetic fields remains unclear. We measure magneto-optical properties of colloidal CdSe/CdMnS nanoplatelets in high magnetic fields up to 30 T and at cryogenic temperatures. The degree of circular polarization of ph…
▽ More
Diluted magnetic semiconductor (DMS) colloidal nanocrystals demonstrate remarkable magneto-optical properties. However, the behavior of circular polarization of their emission in high magnetic fields remains unclear. We measure magneto-optical properties of colloidal CdSe/CdMnS nanoplatelets in high magnetic fields up to 30 T and at cryogenic temperatures. The degree of circular polarization of photoluminescence demonstrates non-monotonous behavior in a magnetic field. In low magnetic fields, the polarization degree is positive, due to an exchange interaction of excitons with localized spins of magnetic Mn ions. The exchange interaction is strong enough to overcome the intrinsic Zeeman splitting, which provides negatively polarized emission in nonmagnetic CdSe/CdS nanoplatelets. After reaching a maximum the polarization degree starts to decrease and reverses the sign to negative in high magnetic fields. The critical magnetic field, in which the sign is reversed, increases when temperature is elevated. We develop a model, which explains this behavior by an interplay of bright and dark exciton recombination.
△ Less
Submitted 2 July, 2024; v1 submitted 10 April, 2024;
originally announced April 2024.
-
Time-Transient Wireless RF Sensor with Differentiative Detecting Capability for Target Ionic Solution of Water and Dielectric Objects Introduced into Water
Authors:
Sobhan Gholami,
EMre Unal,
Hilmi Volkan Demir
Abstract:
A novel wireless microstrip-based RF sensor designed for detecting changes in ionic content of water and the addition of solid contaminant objects is proposed and demonstrated. The sensor can be installed on the exterior wall of dielectric containers and customized according to the material of the container to enable wireless sensing. Its operation within the lower microwave frequency range (670-7…
▽ More
A novel wireless microstrip-based RF sensor designed for detecting changes in ionic content of water and the addition of solid contaminant objects is proposed and demonstrated. The sensor can be installed on the exterior wall of dielectric containers and customized according to the material of the container to enable wireless sensing. Its operation within the lower microwave frequency range (670-730 MHz) serves to minimize signal attenuation in water and streamlines circuitry design. The most significant feature of this sensor is its unique design, rendering it impervious to its surrounding environment. This not only shields it from environmental noise but also maximizes its sensitivity by efficiently utilizing incoming power for sensing purposes. The sensor exhibits remarkable sensitivity, capable of detecting solute concentrations as low as 0.003125 M in water. It can also detect the insertion of foreign solid objects into the container from the exterior wirelessly and distinguish them from liquids being added. As a proof-of-concept demonstration, the sensor in this study was optimized for a porcelain wall of 10-12 mm thickness. The sensor's small size and the materials used for its fabrication make it adaptable to a wide range of applications in industries such as food, pharmaceuticals, and bathroom fixtures. The aforementioned properties position the sensor as an ideal choice for various smart bathroom applications, where accurate and reliable water use monitoring is essential for efficient water conservation.
△ Less
Submitted 25 January, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Dual-resonance nanostructures for colour down-conversion of colloidal quantum emitters
Authors:
Son Tung Ha,
Emmanuel Lassalle,
Xiao Liang,
Thi Thu Ha Do,
Ian Foo,
Sushant Shendre,
Emek Goksu Durmusoglu,
Vytautas Valuckas,
Sourav Adhikary,
Ramon Paniagua-Dominguez,
Hilmi Volkan Demir,
Arseniy Kuznetsov
Abstract:
Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the…
▽ More
Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the emissive materials, maximising the colour conversion efficiency. Here, we present a dual resonance nanostructure made of a titanium dioxide (TiO2) subwavelength grating to enhance the colour down-conversion efficiency of green light at ~530 nm emitted by gradient alloyed CdxZn1-xSeyS1-y colloidal quantum dots (QDs) when excited with a blue light at ~460 nm. A large mode volume can be created within the QD layer by the hybridisation of the grating resonances and waveguide modes. This allows increasing mode overlap between the resonances and the QDs, resulting in large absorption and tailored emission enhancements. Particularly, we achieved polarized light emission with maximum photoluminescence enhancement of ~140 times at a specific angular direction, and a total enhancement of ~34 times within 0.55 numerical aperture (NA) of the collecting objective. The enhancement encompasses absorption enhancement, Purcell enhancement and directionality enhancement (i.e., outcoupling). We achieved total absorption of 35% for green QDs with a remarkably thin colour conversion layer of ~ 400 nm (inclusive of the TiO2 layer). This work provides a guideline for designing large-volume cavities for practical application in absorption/fluorescence enhancement, such as down colour conversion in microLED displays, detectors or photovoltaics.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
Class Attendance System in Education with Deep Learning Method
Authors:
Hüdaverdi Demir,
Serkan Savaş
Abstract:
With the advancing technology, the hardware gain of computers and the increase in the processing capacity of processors have facilitated the processing of instantaneous and real-time images. Face recognition processes are also studies in the field of image processing. Facial recognition processes are frequently used in security applications and commercial applications. Especially in the last 20 ye…
▽ More
With the advancing technology, the hardware gain of computers and the increase in the processing capacity of processors have facilitated the processing of instantaneous and real-time images. Face recognition processes are also studies in the field of image processing. Facial recognition processes are frequently used in security applications and commercial applications. Especially in the last 20 years, the high performances of artificial intelligence (AI) studies have contributed to the spread of these studies in many different fields. Education is one of them. The potential and advantages of using AI in education; can be grouped under three headings: student, teacher, and institution. One of the institutional studies may be the security of educational environments and the contribution of automation to education and training processes. From this point of view, deep learning methods, one of the sub-branches of AI, were used in this study. For object detection from images, a pioneering study has been designed and successfully implemented to keep records of students' entrance to the educational institution and to perform class attendance with images taken from the camera using image processing algorithms. The application of the study to real-life problems will be carried out in a school determined in the 2022-2023 academic year.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Photoinduced transition from quasi-2D Ruddlesden-Popper to 3D halide perovskites for optical writing multicolor and light-erasable images
Authors:
Sergey S. Anoshkin,
Ivan I. Shishkin,
Daria I. Markina,
Lev S. Logunov,
Hilmi Volkan Demir,
Andrey L. Rogach,
Anatoly P. Pushkarev,
Sergey V. Makarov
Abstract:
Development of advanced optical data storage, information encryption, and security labeling technologies requires low-cost materials exhibiting local, pronounced, and diverse modification of their structure-dependent optical properties under external excitation. Herein, for these purposes, we propose and develop a novel platform relying on layered lead halide Ruddlesden-Popper (quasi-2D) phases th…
▽ More
Development of advanced optical data storage, information encryption, and security labeling technologies requires low-cost materials exhibiting local, pronounced, and diverse modification of their structure-dependent optical properties under external excitation. Herein, for these purposes, we propose and develop a novel platform relying on layered lead halide Ruddlesden-Popper (quasi-2D) phases that undergo a light-induced transition towards bulk (3D) halide perovskite and employ this phenomenon for the direct optical writing of various multicolor patterns. This transition causes the weakening of quantum confinement, and hence the bandgap reduction in these photoluminescent thin films. To significantly extend the color gamut of evolving photoluminescence, we make use of mixed-halide compositions exhibiting photoinduced halide segregation. As a result, the emission wavelength of the resulting films can be widely tuned across the entire 450-600 nm range depending on the illumination conditions. We show that pulsed near-infrared femtosecond laser irradiation provides high-resolution direct writing, whereas continuous-wave ultraviolet exposure is suitable for fast recording on larger scales. The luminescent micro- and macro-scale images created on such quasi-2D perovskite films can be erased during the visualization process, by which the persistence of these images to UV light exposure can be controlled and increased further with the increasing number of octahedral layers used in the perovskite stacks. This makes the proposed writing/erasing perovskite-based platform suitable for the manufacturing of both inexpensive optical data storage devices and light-erasable security labels.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Near-Unity Emitting, Widely Tailorable and Stable Exciton Concentrators Built from Doubly Gradient 2D Semiconductor Nanoplatelets
Authors:
Xiao Liang,
Emek G. Durmusoglu,
Maria Lunina,
Pedro Ludwig Hernandez-Martinez,
Vytautas Valuckas,
Fei Yan,
Yulia Lekina,
Vijay Kumar Sharma,
Tingting Yin,
Son Tung Ha,
Ze Xiang Shen,
Handong Sun,
Arseniy Kuznetsov,
Hilmi Volkan Demir
Abstract:
The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, espec…
▽ More
The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, especially in quasi 2-dimensional core-shell semiconductor nanoplatelets (NPLs), as the epitaxial growth of the inorganic shell along the direction of the thickness that solely contributes to the quantum confined effect significantly undermines the strength of the EI. Herein we propose and demonstrate a novel doubly-gradient (DG) core-shell architecture of semiconductor NPLs for on-demand tailoring of the EI strength by controlling the localized exciton concentration via in-plane architectural modulation, demonstrated by a wide tuning of radiative recombination rate and exciton binding energy. Moreover, these exciton-concentration-engineered DG NPLs also exhibit a near-unity quantum yield, remarkable thermal and photo stability, as well as considerably suppressed self-absorption. As proof-of-concept demonstrations, highly efficient color converters and high-performance light-emitting diodes (external quantum efficiency: 16.9%, maximum luminance: 43,000 cd/m2) have been achieved based on the DG NPLs. This work thus opens up new avenues for develo** high-performance colloidal optoelectronic device applications.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Polariton lasing in Mie-resonant perovskite nanocavity
Authors:
M. A. Masharin,
D. Khmelevskaia,
V. I. Kondratiev,
D. I. Markina,
A. D. Utyushev,
D. M. Dolgintsev,
A. D. Dmitriev,
V. A. Shahnazaryan,
A. P. Pushkarev,
F. Isik,
I. V. Iorsh,
I. A. Shelykh,
H. V. Demir,
A. K. Samusev,
S. V. Makarov
Abstract:
Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mir…
▽ More
Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mirror-image Mie modes in a cuboid CsPbBr$_3$ nanoparticle to achieve coherent emission at the visible wavelength of around 0.53~$μ$m from its ultra-small ($\approx$0.007$μ$m$^3$ or $\approxλ^3$/20) semiconductor nanocavity. The polaritonic nature of the emission from the nanocavity localized in all three dimensions is proven by direct comparison with corresponding one-dimensional and two-dimensional waveguiding systems with similar material parameters. Such a deeply subwavelength nanolaser is enabled not only by the high values for exciton binding energy ($\approx$35 meV), refractive index ($>$2.5 at low temperature), and luminescence quantum yield of CsPbBr$_3$, but also by the optimization of polaritons condensation on the Mie resonances. Moreover, the key parameters for optimal lasing conditions are intermode free spectral range and phonons spectrum in CsPbBr$_3$, which govern polaritons condensation path. Such chemically synthesized colloidal CsPbBr$_3$ nanolasers can be easily deposited on arbitrary surfaces, which makes them a versatile tool for integration with various on-chip systems.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Enhancing Machine Learning Model Performance with Hyper Parameter Optimization: A Comparative Study
Authors:
Caner Erden,
Halil Ibrahim Demir,
Abdullah Hulusi Kökçam
Abstract:
One of the most critical issues in machine learning is the selection of appropriate hyper parameters for training models. Machine learning models may be able to reach the best training performance and may increase the ability to generalize using hyper parameter optimization (HPO) techniques. HPO is a popular topic that artificial intelligence studies have focused on recently and has attracted incr…
▽ More
One of the most critical issues in machine learning is the selection of appropriate hyper parameters for training models. Machine learning models may be able to reach the best training performance and may increase the ability to generalize using hyper parameter optimization (HPO) techniques. HPO is a popular topic that artificial intelligence studies have focused on recently and has attracted increasing interest. While the traditional methods developed for HPO include exhaustive search, grid search, random search, and Bayesian optimization; meta-heuristic algorithms are also employed as more advanced methods. Meta-heuristic algorithms search for the solution space where the solutions converge to the best combination to solve a specific problem. These algorithms test various scenarios and evaluate the results to select the best-performing combinations. In this study, classical methods, such as grid, random search and Bayesian optimization, and population-based algorithms, such as genetic algorithms and particle swarm optimization, are discussed in terms of the HPO. The use of related search algorithms is explained together with Python programming codes developed on packages such as Scikit-learn, Sklearn Genetic, and Optuna. The performance of the search algorithms is compared on a sample data set, and according to the results, the particle swarm optimization algorithm has outperformed the other algorithms.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
Room-temperature exceptional-point-driven polariton lasing from perovskite metasurface
Authors:
M. A. Masharin,
A. K. Samusev,
A. A. Bogdanov,
I. V. Iorsh,
H. V. Demir,
S. V. Makarov
Abstract:
Excitons in lead bromide perovskites exhibit high binding energy and high oscillator strength, allowing for a strong light-matter coupling regime in the perovskite-based cavities localizing photons at the nanoscale. This opens up the way for the realization of exciton-polariton Bose-Einstein condensation and polariton lasing at room temperature -- the inversion-free low-threshold stimulated emissi…
▽ More
Excitons in lead bromide perovskites exhibit high binding energy and high oscillator strength, allowing for a strong light-matter coupling regime in the perovskite-based cavities localizing photons at the nanoscale. This opens up the way for the realization of exciton-polariton Bose-Einstein condensation and polariton lasing at room temperature -- the inversion-free low-threshold stimulated emission. However, polariton lasing in perovskite planar photon cavities without Bragg mirrors has not yet been observed and proved experimentally. In this work, we employ perovskite metasurface, fabricated with nanoimprint lithography, supporting so-called exceptional points to demonstrate the room-temperature polariton lasing. The exceptional points in exciton-polariton dispersion of the metasurface appear upon optically pum** in the nonlinear regime in the spectral vicinity of a symmetry-protected bound state in the continuum providing high mode confinement with the enhanced local density of states beneficial for polariton condensation. The observed lasing emission possesses high directivity with a divergence angle of around 1$^\circ$ over one axis. The employed nanoimprinting approach for solution-processable large-scale polariton lasers is compatible with various planar photonic platforms suitable for on-chip integration.
△ Less
Submitted 19 April, 2023; v1 submitted 26 December, 2022;
originally announced December 2022.
-
Hybrid Dielectric-Plasmonic Nanoantenna with Multiresonances for Subwavelength Photon Sources
Authors:
Pavel A. Dmitriev,
Emmanuel Lassalle,
Lu Ding,
Zhenying Pan,
Darren C. J. Neo,
Vytautas Valuckas,
Ramón Paniagua-Dominguez,
Joel K. W. Yang,
Hilmi Volkan Demir,
Arseniy I. Kuznetsov
Abstract:
The enhancement of the photoluminescence of quantum dots induced by an optical nanoantenna has been studied considerably, but there is still significant interest in optimizing and miniaturizing such structures, especially when accompanied by an experimental demonstration. Most of the realizations use plasmonic platforms, and some also use all-dielectric nanoantennas, but hybrid dielectric-plasmoni…
▽ More
The enhancement of the photoluminescence of quantum dots induced by an optical nanoantenna has been studied considerably, but there is still significant interest in optimizing and miniaturizing such structures, especially when accompanied by an experimental demonstration. Most of the realizations use plasmonic platforms, and some also use all-dielectric nanoantennas, but hybrid dielectric-plasmonic (subwavelength) nanostructures have been very little explored. In this paper, we propose and demonstrate single subwavelength hybrid dielectric-plasmonic optical nanoantennas coupled to localized quantum dot emitters that constitute efficient and bright unidirectional photon sources under optical pum**. To achieve this, we devised a silicon nanoring sitting on a gold mirror with a 10 nm gap in-between, where an assembly of colloidal quantum dots is embedded. Such a structure supports both (radiative) antenna mode and (nonradiative) gap mode resonances, which we exploit for the dual purpose of out-coupling the light emitted by the quantum dots into the far-field with out-of-plane directivity, and for enhancing the excitation of the dots by the optical pump. Moreover, almost independent control of the resonance spectral positions can be achieved by simple tuning of geometrical parameters such as the ring inner and outer diameters, allowing us to conveniently adjust these resonances with respect to the quantum dots emission and absorption wavelengths. Using the proposed architecture, we obtain experimentally average fluorescence enhancement factors up to $654\times$ folds mainly due to high radiative efficiencies, and associated with a directional emission of the photoluminescence into a cone of $\pm 17\degree$ in the direction normal to the sample plane. We believe the solution presented here to be viable and relevant for the next generation of light-emitting devices.
△ Less
Submitted 28 February, 2023; v1 submitted 27 June, 2022;
originally announced June 2022.
-
Object Detection and Tracking with Autonomous UAV
Authors:
A. Huzeyfe Demir,
Berke Yavas,
Mehmet Yazici,
Dogukan Aksu,
M. Ali Aydin
Abstract:
In this paper, a combat Unmanned Air Vehicle (UAV) is modeled in the simulation environment. The rotary wing UAV is successfully performed various tasks such as locking on the targets, tracking, and sharing the relevant data with surrounding vehicles. Different software technologies such as API communication, ground control station configuration, autonomous movement algorithms, computer vision, an…
▽ More
In this paper, a combat Unmanned Air Vehicle (UAV) is modeled in the simulation environment. The rotary wing UAV is successfully performed various tasks such as locking on the targets, tracking, and sharing the relevant data with surrounding vehicles. Different software technologies such as API communication, ground control station configuration, autonomous movement algorithms, computer vision, and deep learning are employed.
△ Less
Submitted 26 June, 2022;
originally announced June 2022.
-
Plasmon-Enhanced Photoresponse of a Single Silver Nanowire and its Networked Devices
Authors:
Mohammadali Razeghi,
Merve Üstünçelik,
Farzan Shabani,
Hilmi Volkan Demir,
T. Serkan Kasırga
Abstract:
Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternat…
▽ More
Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternative to common flexible transparent electrode materials used in optoelectronic devices. To date there have been no reports on the photoresponse of Ag NWs. In this work, we show that a single Ag NW and a network of such Ag NWs possess a significant, intrinsic photoresponse thanks to the photo-bolometric effect, as directly observed and measured using scanning photocurrent microscopy. Surface plasmon polaritons (SPP) created at the contact metals or plasmons created at the nanowire-metal structures cause heating at the junctions where a plasmonic field enhancement is possible. The local heating of the Ag NWs results in negative photoconductance due to the bolometric effect. Here an open-circuit response due to the plasmon-enhanced Seebeck effect was recorded at the NW-metal contact junctions. The SPP-assisted bolometric effect is found to be further enhanced by decorating the Ag NWs with Ag nanoparticles. These observations are relevant to the use of metallic nanowires in plasmonic applications in particular and in optoelectronics in general. Our findings may pave the path for plasmonics enabled sensing without a spectroscopic detection.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Highly-directional, highly-efficient solution-processed light-emitting diodes of all-face-down oriented colloidal quantum wells
Authors:
Hamed Dehghanpour Baruj,
Iklim Yurdakul,
Betul Canimkurbey,
Ahmet Tarik Isik,
Farzan Shabani,
Savas Delikanli,
Sushant Shendre,
Onur Erdem,
Furkan Isik,
Hilmi Volkan Demir
Abstract:
Semiconductor colloidal quantum wells (CQWs) make an exciting quasi-2D class of nanocrystals thanks to their unique properties including their highly anisotropic optical transition dipole moment (TDM). Thus, employing a film of CQWs with face-down orientation as an emissive layer (EML) in an electroluminescent device is expected to substantially boost photon outcoupling efficiency. Here, we show a…
▽ More
Semiconductor colloidal quantum wells (CQWs) make an exciting quasi-2D class of nanocrystals thanks to their unique properties including their highly anisotropic optical transition dipole moment (TDM). Thus, employing a film of CQWs with face-down orientation as an emissive layer (EML) in an electroluminescent device is expected to substantially boost photon outcoupling efficiency. Here, we show all-solution-processed colloidal quantum well light-emitting diodes (CQW-LEDs) using a single all-face-down oriented self-assembled monolayer (SAM) film of CQWs that enables a high level of in-plane (IP) TDMs of 92%. This SAM film significantly enhances the outcoupling efficiency from 22% (of standard randomly-oriented emitters) to 34% (of face-down oriented emitters) and charge injection efficiency. This SAM-CQW-LED architecture enables a record high level of external quantum efficiency of 18.1% for the solution-processed type of CQW-LEDs, putting their efficiency performance on par with the hybrid organic-inorganic evaporation-based CQW-LEDs and all other best solution-processed LEDs. In addition, this architecture provides a high maximum brightness of 19,800 cd/m2 with a long operational lifetime of 247 h at 100 cd/m2 along with saturated deep-red emission (651 nm). These findings indicate the effectiveness of oriented self-assembly of CQWs as electrically-driven emissive layers in improving outcoupling and external quantum efficiencies in the CQW-LEDs.
△ Less
Submitted 21 January, 2022;
originally announced January 2022.
-
Ultrahigh Green and Red Optical Gain Cross-sections from Solutions of Colloidal Quantum Well Heterostructures
Authors:
Savas Delikanli,
Onur Erdem,
Furkan Isik,
Hameed Dehghanpour Baruj,
Farzan Shabani,
Huseyin Bilge Yagci,
Hilmi Volkan Demir
Abstract:
Optical gain in solution, which provides high photostability as a result of continuous regeneration of the gain medium, is extremely attractive for optoelectronic applications. Here, we propose and demonstrate amplified spontaneous emission (ASE) in solution with ultralow thresholds of 30 mikroJ/cm2 in red and of 44 mikroJ/cm2 in green from engineered colloidal quantum well (CQW) heterostructures.…
▽ More
Optical gain in solution, which provides high photostability as a result of continuous regeneration of the gain medium, is extremely attractive for optoelectronic applications. Here, we propose and demonstrate amplified spontaneous emission (ASE) in solution with ultralow thresholds of 30 mikroJ/cm2 in red and of 44 mikroJ/cm2 in green from engineered colloidal quantum well (CQW) heterostructures. For this purpose, CdSe/CdS core/crown CQWs, designed to hit the green region, and CdSe/CdS/CdxZn1-xS core/crown/gradient-alloyed shell CQWs, further tuned to reach the red region by shell alloying, were employed to achieve high-performance ASE in the visible. The net modal gain of these CQWs reaches 530 cm-1 for the green and 201 cm-1 for the red, two orders of magnitude larger than those of colloidal quantum dots (QDs) in solution owing to intrinsically larger gain cross-sections of these CQWs. To explain the root cause for ultrahigh gain coefficient in solution, we show that for the first time that the gain cross-sections of these CQWs is 3.3x10-14 cm2 in the green and 1.3x10-14 cm2 in the red which are two orders magnitude larger compared to those of CQDs. These findings confirm the extraordinary prospects of these solution-processed CQWs as solution-based optical gain media in lasing applications.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
'Meta-atomless' architecture based on an irregular continuous fabric of coupling-tuned identical nanopillars enables highly efficient and achromatic metasurfaces
Authors:
Hüseyin Bilge Yağcı,
Hilmi Volkan Demir
Abstract:
Metasurfaces are subwavelength-thick constructs, consisting of discrete meta-atoms, providing discretized levels of phase accumulation that collectively approximate a designed optical functionality. The meta-atoms utilizing geometric phase with polarization-converting structures produced encouraging implementations of optical components including metalenses. However, to date, a pending and fundame…
▽ More
Metasurfaces are subwavelength-thick constructs, consisting of discrete meta-atoms, providing discretized levels of phase accumulation that collectively approximate a designed optical functionality. The meta-atoms utilizing geometric phase with polarization-converting structures produced encouraging implementations of optical components including metalenses. However, to date, a pending and fundamental problem of this approach has been the low device efficiency that such resulting components suffer, an unwanted side effect of large lattice constants used for preventing inter-coupling of their meta-atoms. Although the use of near-field coupling for tuning electromagnetic resonances found its use in constructing efficient narrow-band designs, such structures fell short of providing high efficiency over a broad spectrum. Here, we propose and show that tightly packed fabric of identical dielectric nanopillar waveguides with continuously-tuned inter-coupling distances make excellent and complete achromatic metasurface elements. This architecture enables the scatterers to interact with the incoming wave extremely efficiently. As a proof-of-concept demonstration, we showed an achromatic cylindrical metalens, constructed from strongly coupled dielectric nanopillars of a single geometry as continuously-set phase elements in a 'meta-atomless' fashion, working in the entirety of 400-700 nm band. This metalens achieves over 85 percent focusing efficiency across this whole spectral range. To combat polarization sensitivity, we used hexagonally stacked nanopillars to build up a polarization-independent scatterer library. Finally, a circular metalens with polarization-independent operation and achromatic focusing was obtained. This is a paradigm shift in making an achromatic metasurface architecture by wovening identical nanopillars coupled into an irregular lattice constructed via careful tuning.
△ Less
Submitted 21 February, 2021; v1 submitted 11 December, 2020;
originally announced December 2020.
-
Single-mode lasing from a single 7 nm thick monolayer of colloidal quantum wells in a monolithic microcavity
Authors:
Sina Foroutan-Barenji,
Onur Erdem,
Savas Delikanli,
Huseyin Bilge Yagci,
Negar Gheshlaghi,
Yemliha Altintas,
Hilmi Volkan Demir
Abstract:
In this work, we report the first account of monolithically-fabricated vertical cavity surface emitting lasers (VCSELs) of densely-packed, orientation-controlled, atomically flat colloidal quantum wells (CQWs) using a self-assembly method and demonstrate single-mode lasing from a record thin colloidal gain medium with a film thickness of 7 nm under femtosecond optical excitation. We used specially…
▽ More
In this work, we report the first account of monolithically-fabricated vertical cavity surface emitting lasers (VCSELs) of densely-packed, orientation-controlled, atomically flat colloidal quantum wells (CQWs) using a self-assembly method and demonstrate single-mode lasing from a record thin colloidal gain medium with a film thickness of 7 nm under femtosecond optical excitation. We used specially engineered CQWs to demonstrate these hybrid CQW-VCSELs consisting of only a few layers to a single monolayer of CQWs and achieved the lasing from these thin gain media by thoroughly modeling and implementing a vertical cavity consisting of distributed Bragg reflectors with an additional dielectric layer for mode tuning. Accurate spectral and spatial alignment of the cavity mode with the CQW films was secured with the help of full electromagnetic computations. While overcoming the long-pending problem of limited electrical conductivity in thicker colloidal films, such ultra-thin colloidal gain media can help enabling fully electrically-driven colloidal lasers.
△ Less
Submitted 16 October, 2020;
originally announced October 2020.
-
Self-Resonant u-Lasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning
Authors:
Negar Gheshlaghi,
Sina Foroutan-Barenji,
Onur Erdem,
Yemliha Altintas,
Farzan Shabani,
Muhammad Hamza Humayun,
Hilmi Volkan Demir
Abstract:
Here, the first account of self-resonant fully-colloidal u-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additional…
▽ More
Here, the first account of self-resonant fully-colloidal u-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and different physical and chemical properties of the NCs remain pristine. Thanks to capability of the proposed patterning method, patterns of NCs with sub-wavelength lateral feature size and micron-scale height are fabricated in the aspect ratios of 1:15 (<100 nm lateral patterned features to >1.5 μm film thickness). The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. The spectral characteristics of the designed CQW resonator structure are well supported with a numerical model of full electromagnetic solutions. Such directly deep-patterned self-resonant u-lasers of CQWs hold great promise for on-chip integration to photonic circuits.
△ Less
Submitted 13 October, 2020; v1 submitted 3 October, 2020;
originally announced October 2020.
-
Filter design for small target detection on infrared imagery using normalized-cross-correlation layer
Authors:
H. Seçkin Demir,
Erdem Akagunduz
Abstract:
In this paper, we introduce a machine learning approach to the problem of infrared small target detection filter design. For this purpose, similarly to a convolutional layer of a neural network, the normalized-cross-correlational (NCC) layer, which we utilize for designing a target detection/recognition filter bank, is proposed. By employing the NCC layer in a neural network structure, we introduc…
▽ More
In this paper, we introduce a machine learning approach to the problem of infrared small target detection filter design. For this purpose, similarly to a convolutional layer of a neural network, the normalized-cross-correlational (NCC) layer, which we utilize for designing a target detection/recognition filter bank, is proposed. By employing the NCC layer in a neural network structure, we introduce a framework, in which supervised training is used to calculate the optimal filter shape and the optimum number of filters required for a specific target detection/recognition task on infrared images. We also propose the mean-absolute-deviation NCC (MAD-NCC) layer, an efficient implementation of the proposed NCC layer, designed especially for FPGA systems, in which square root operations are avoided for real-time computation. As a case study we work on dim-target detection on mid-wave infrared imagery and obtain the filters that can discriminate a dim target from various types of background clutter, specific to our operational concept.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Orientation-Controlled Construction of Superstructures of Atomically-Flat Nanocrystals: Pushing the Limits of Ultra-Thin Colloidal Gain Media
Authors:
Onur Erdem,
Sina Foroutan,
Negar Gheshlaghi,
Burak Guzelturk,
Yemliha Altintas,
Hilmi Volkan Demir
Abstract:
We propose and demonstrate a method for the construction of highly uniform, multilayered, orientation-controlled superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using bi-phase liquid interface. These atomically-flat nanocrystals are sequentially deposited, all face-down onto a solid substrate, into slabs having monolayer-precise thickness and excellent homogeneity over seve…
▽ More
We propose and demonstrate a method for the construction of highly uniform, multilayered, orientation-controlled superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using bi-phase liquid interface. These atomically-flat nanocrystals are sequentially deposited, all face-down onto a solid substrate, into slabs having monolayer-precise thickness and excellent homogeneity over several tens of cm2 areas. Owing to the near-unity surface coverage and film uniformity of this deposition technique, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin colloidal film having only 6 layers of NPLs, which corresponds to a mere 42 nm thickness. Furthermore, systematic studies of optical gain properties of these NPL superstructures constructed having precise numbers of NPL layers tuned from 6 to 15 revealed the reduction in the gain threshold with the increasing number of NPL monolayers, along with a continuous spectral shift in the position of the ASE peak (by ~18 nm). These observations can be well explained by the variation of the optical field confinement factor with the NPL waveguide thickness and propagation wavelength. This work demonstrates the possibility of fabricating thickness-tunable, large-area three-dimensional superstructures made of NPL building blocks, which can be additively constructed one monolayer at a time. The proposed technique can also be extended to build hybrid NPL films of mixed orientations and allow for precise large-area device engineering.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Magneto-optics of excitons interacting with magnetic ions in CdSe/CdMnS colloidal nanoplatelets
Authors:
E. V. Shornikova,
D. R. Yakovlev,
D. O. Tolmachev,
V. Yu. Ivanov,
I. V. Kalitukha,
V. F. Sapega,
D. Kudlacik,
Yu. G. Kusrayev,
A. A. Golovatenko,
S. Shendre,
S. Delikanli,
H. V. Demir,
M. Bayer
Abstract:
Excitons in diluted magnetic semiconductors represent excellent probes for studying the magnetic properties of these materials. Various magneto-optical effects, which depend sensitively on the exchange interaction of the excitons with the localized spins of the magnetic ions can be used for probing. Here, we study core/shell CdSe/(Cd,Mn)S colloidal nanoplatelets hosting diluted magnetic semiconduc…
▽ More
Excitons in diluted magnetic semiconductors represent excellent probes for studying the magnetic properties of these materials. Various magneto-optical effects, which depend sensitively on the exchange interaction of the excitons with the localized spins of the magnetic ions can be used for probing. Here, we study core/shell CdSe/(Cd,Mn)S colloidal nanoplatelets hosting diluted magnetic semiconductor layers. The inclusion of the magnetic Mn$^{2+}$ ions is evidenced by three magneto-optical techniques using high magnetic fields up to 15 T: polarized photoluminescence, optically detected magnetic resonance, and spin-flip Raman scattering. In particular, information on the Mn$^{2+}$ concentration in the CdS shell layers can be obtained from the spin-lattice relaxation dynamics of the Mn$^{2+}$ spin system.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Lasing action in single subwavelength particles supporting supercavity modes
Authors:
Vasilii Mylnikov,
Son Tung Ha,
Zhenying Pan,
Vytautas Valuckas,
Ramon Paniagua-Dominguez,
Hilmi Volkan Demir,
Arseniy I. Kuznetsov
Abstract:
On-chip light sources are critical for the realization of fully integrated photonic circuitry. So far, semiconductor miniaturized lasers have been mainly limited to sizes on the order of a few microns. Further reduction of sizes is challenging fundamentally due to the associated radiative losses. While using plasmonic metals helps to reduce radiative losses and sizes, they also introduce Ohmic los…
▽ More
On-chip light sources are critical for the realization of fully integrated photonic circuitry. So far, semiconductor miniaturized lasers have been mainly limited to sizes on the order of a few microns. Further reduction of sizes is challenging fundamentally due to the associated radiative losses. While using plasmonic metals helps to reduce radiative losses and sizes, they also introduce Ohmic losses hindering real improvements. In this work, we show that, making use of quasi-bound states in the continuum, or supercavity modes, we circumvent these fundamental issues and realize the smallest purely semiconductor nanolaser thus far. Here, the nanolaser structure is based on a single semiconductor nanocylinder that intentionally takes advantage of the destructive interference between two supported optical modes, namely Fabry-Perot and Mie modes, to obtain a significant enhancement in the quality factor of the cavity. We experimentally demonstrate the concept and obtain optically pumped lasing action using GaAs at cryogenic temperatures. The optimal nanocylinder size is as small as 500 nm in diameter and only 330 nm in height with a lasing wavelength around 825 nm, corresponding to a size-to-wavelength ratio around 0.6. The obtained results pave the way for the development of smaller on-chip light sources free of Ohmic losses, which may find applications in the future photonic circuits.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Control of LED Emission with Functional Dielectric Metasurfaces
Authors:
Egor Khaidarov,
Zhengtong Liu,
Ramon Paniagua-Dominguez,
Son Tung Ha,
Vytautas Valuckas,
Xinan Liang,
Yuriy Akimov,
** Bai,
Ching Eng Png,
Hilmi Volkan Demir,
Arseniy I. Kuznetsov
Abstract:
The improvement of light-emitting diodes (LEDs) is one of the major goals of optoelectronics and photonics research. While emission rate enhancement is certainly one of the targets, in this regard, for LED integration to complex photonic devices, one would require to have, additionally, precise control of the wavefront of the emitted light. Metasurfaces are spatial arrangements of engineered scatt…
▽ More
The improvement of light-emitting diodes (LEDs) is one of the major goals of optoelectronics and photonics research. While emission rate enhancement is certainly one of the targets, in this regard, for LED integration to complex photonic devices, one would require to have, additionally, precise control of the wavefront of the emitted light. Metasurfaces are spatial arrangements of engineered scatters that may enable this light manipulation capability with unprecedented resolution. Most of these devices, however, are only able to function properly under irradiation of light with a large spatial coherence, typically normally incident lasers. LEDs, on the other hand, have angularly broad, Lambertian-like emission patterns characterized by a low spatial coherence, which makes the integration of metasurface devices on LED architectures extremely challenging. A novel concept for metasurface integration on LED is proposed, using a cavity to increase the LED spatial coherence through an angular collimation. Due to the resonant character of the cavity, extending the spatial coherence of the emitted light does not come at the price of any reduction in the total emitted power. The experimental demonstration of the proposed concept is implemented on a GaP LED architecture including a hybrid metallic-Bragg cavity. By integrating a silicon metasurface on top we demonstrate two different functionalities of these compact devices: directional LED emission at a desired angle and LED emission of a vortex beam with an orbital angular momentum. The presented concept is general, being applicable to other incoherent light sources and enabling metasurfaces designed for plane waves to work with incoherent light emitters.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
-
Sub-single exciton optical gain threshold in colloidal semiconductor quantum wells with gradient alloy shelling
Authors:
Nima Taghipour,
Savas Delikanli,
Sushant Shendre,
Mustafa Sak,
Mingjie Li,
Furkan Isik,
Ibrahim Tanriover,
Burak Guzelturk,
Tze Chien Sum,
Hilmi Volkan Demir
Abstract:
Colloidal semiconductor quantum wells have emerged as a promising material platform for use in solution-processable light-generation including colloidal lasers. However, application relying on their optical gain suffer from a fundamental complication due to multi-excitonic nature of light amplification in common II-VI semiconductor nanocrystals. This undesirably increases the optical gain threshol…
▽ More
Colloidal semiconductor quantum wells have emerged as a promising material platform for use in solution-processable light-generation including colloidal lasers. However, application relying on their optical gain suffer from a fundamental complication due to multi-excitonic nature of light amplification in common II-VI semiconductor nanocrystals. This undesirably increases the optical gain threshold and shortens the net gain lifetime because of fast nonradiative Auger decay. Here, we demonstrate sub-single exciton level of optical gain threshold in specially engineered CdSe/CdS@CdZnS core/crown@gradient alloyed shell colloidal quantum wells. This sub-single exciton ensemble-averaged gain threshold of Ng = 0.80 (per particle) resulting from impeded Auger recombination along with a large absorption cross-section of quantum wells enables us to observe the amplified spontaneous emission starting at a low pump fluence of 800 nJ cm-2, at least three-folds better than the previously best reported values among all colloidal semiconductor nanocrystals. Moreover, long optical gain lifetimes of 800 ps accompanied with modal gain coefficients of 2,000 cm-1 are achieved. Finally, using these gradient shelled quantum wells, we show a vertical cavity surface-emitting colloidal laser operating at an ultralow lasing threshold of 7.5 micro-joule cm-2. These results represent a significant step towards the realization of solution-processable electrically-driven colloidal lasers.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Sustained biexciton emission in colloidal quantum wells assisted by dopant-host interaction
Authors:
Junhong Yu,
Manoj Sharma,
Mingjie Li,
Pedro Ludwig Hernandez-Martinez,
Savas Delikanli,
Ashma Sharma,
Yemliha Altintas,
Chathuranga Hettiarachchi,
TzeChien Sum,
Hilmi Volkan Demir,
Cuong Dang
Abstract:
Biexcitons have been considered as one of the fundamental building blocks for quantum technology because of its overwhelming advantages in generating entangled photon pairs. Although many-body complexes have been demonstrated recently in mono-layer transition metal dichalcogenides (TMDs), the low emission efficiency and scale up capability hinder their applications. Colloidal nanomaterials, with h…
▽ More
Biexcitons have been considered as one of the fundamental building blocks for quantum technology because of its overwhelming advantages in generating entangled photon pairs. Although many-body complexes have been demonstrated recently in mono-layer transition metal dichalcogenides (TMDs), the low emission efficiency and scale up capability hinder their applications. Colloidal nanomaterials, with high quantum efficiency and ease of synthesis/processing, are regarded to be an appealing complement to TMDs for biexciton sources. However, a progress towards biexciton emission in colloidal nanomaterials has been challenging largely by small binding energy and ultrafast non-radiative multiexciton recombination. Here, we demonstrate room-temperature biexciton emission in Cu-doped CdSe colloidal quantum wells (CQWs) under continuous-wave excitation with intensity as low as ~10 W/cm2. The characteristics of radiative biexciton states are investigated by their super linear emission with respect to excitation power, thermal stability and transient photophysics. The interaction between the quantum confined host carriers and the dopant ions increases biexciton binding energy by two folds compared to the undoped CQWs. Such strong binding energy together with suppressed Auger recombination and efficient, spectrally narrow photoluminescence in a quasi-2D semiconductor enables sustained biexciton emission at room temperature, providing a potential solution for efficient, scalable and stand-alone quantum devices.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Named Entity Recognition on Twitter for Turkish using Semi-supervised Learning with Word Embeddings
Authors:
Eda Okur,
Hakan Demir,
Arzucan Özgür
Abstract:
Recently, due to the increasing popularity of social media, the necessity for extracting information from informal text types, such as microblog texts, has gained significant attention. In this study, we focused on the Named Entity Recognition (NER) problem on informal text types for Turkish. We utilized a semi-supervised learning approach based on neural networks. We applied a fast unsupervised m…
▽ More
Recently, due to the increasing popularity of social media, the necessity for extracting information from informal text types, such as microblog texts, has gained significant attention. In this study, we focused on the Named Entity Recognition (NER) problem on informal text types for Turkish. We utilized a semi-supervised learning approach based on neural networks. We applied a fast unsupervised method for learning continuous representations of words in vector space. We made use of these obtained word embeddings, together with language independent features that are engineered to work better on informal text types, for generating a Turkish NER system on microblog texts. We evaluated our Turkish NER system on Twitter messages and achieved better F-score performances than the published results of previously proposed NER systems on Turkish tweets. Since we did not employ any language dependent features, we believe that our method can be easily adapted to microblog texts in other morphologically rich languages.
△ Less
Submitted 19 October, 2018;
originally announced October 2018.
-
Anomalous Spectral Characteristics of Ultrathin sub-nm Colloidal CdSe Nanoplatelets
Authors:
Sumanta Bose,
Savas Delikanli,
Aydan Yeltik,
Manoj Sharma,
Onur Erdem,
Cuong Dang,
Weijun Fan,
Dao Hua Zhang,
Hilmi Volkan Demir
Abstract:
We demonstrate high quantum yield broad photoluminescence emission of ultrathin sub-nanometer CdSe nanoplatelets (two-monolayer). They also exhibit polarization-characterized lateral size dependent anomalous heavy hole and light/split-off hole absorption intensities.
We demonstrate high quantum yield broad photoluminescence emission of ultrathin sub-nanometer CdSe nanoplatelets (two-monolayer). They also exhibit polarization-characterized lateral size dependent anomalous heavy hole and light/split-off hole absorption intensities.
△ Less
Submitted 30 October, 2017;
originally announced February 2018.
-
Highly efficient visible colloidal lead-halide perovskite nanocrystal light-emitting diodes
Authors:
Fei Yan,
Jun Xing,
Guichuan Xing,
Lina Quan,
Swee Tiam Tan,
Jiaxin Zhao,
Rui Su,
Lulu Zhang,
Shi Chen,
Yawen Zhao,
Alfred Huan,
Edward H. Sargent,
Qihua Xiong,
Hilmi Volkan Demir
Abstract:
Lead-halide perovskites have been attracting attention for potential use in solid-state lighting. Following the footsteps of solar cells, the field of perovskite light-emitting diodes (PeLEDs) has been growing rapidly. Their application prospects in lighting, however, remain still uncertain due to a variety of shortcomings in device performance including their limited levels of luminous efficiency…
▽ More
Lead-halide perovskites have been attracting attention for potential use in solid-state lighting. Following the footsteps of solar cells, the field of perovskite light-emitting diodes (PeLEDs) has been growing rapidly. Their application prospects in lighting, however, remain still uncertain due to a variety of shortcomings in device performance including their limited levels of luminous efficiency achievable thus far. Here we show high-efficiency PeLEDs based on colloidal perovskite nanocrystals (PeNCs) synthesized at room temperature possessing dominant first-order excitonic radiation (enabling a photoluminescence quantum yield of 71% in solid film), unlike in the case of bulk perovskites with slow electron-hole bimolecular radiative recombination (a second-order process). In these PeLEDs, by reaching charge balance in the recombination zone, we find that the Auger nonradiative recombination, with its significant role in emission quenching, is effectively suppressed in low driving current density range. In consequence, these devices reach a record high maximum external quantum efficiency of 12.9% reported to date and an unprecedentedly high power efficiency of 30.3 lm W-1 at luminance levels above 1000 cd m-2 as required for various applications. These findings suggest that, with feasible levels of device performance, the PeNCs hold great promise for their use in LED lighting and displays.
△ Less
Submitted 31 January, 2018;
originally announced January 2018.
-
Temperature-dependent Optoelectronic Properties of Quasi-2D Colloidal Cadmium Selenide Nanoplatelets
Authors:
Sumanta Bose,
Sushant Shendre,
Zhigang Song,
Vijay Kumar Sharma,
Dao Hua Zhang,
Cuong Dang,
Weijun Fan,
Hilmi Volkan Demir
Abstract:
Colloidal Cadmium Selenide (CdSe) nanoplatelets (NPLs) are a recently developed class of efficient luminescent nanomaterial suitable for optoelectronic device applications. A change in temperature greatly affects their electronic bandstructure and luminescence properties. It is important to understand how-and-why the characteristics of NPLs are influenced, particularly at elevated temperature, whe…
▽ More
Colloidal Cadmium Selenide (CdSe) nanoplatelets (NPLs) are a recently developed class of efficient luminescent nanomaterial suitable for optoelectronic device applications. A change in temperature greatly affects their electronic bandstructure and luminescence properties. It is important to understand how-and-why the characteristics of NPLs are influenced, particularly at elevated temperature, where both reversible and irreversible quenching processes come into picture. Here we present a study on the effect of elevated temperature on the characteristics of colloidal CdSe NPLs. We used an effective-mass envelope function theory based 8-band k$\cdot$p model and density-matrix theory considering exciton-phonon interaction. We observed the photoluminescence (PL) spectra at various temperatures for their photon emission energy, PL linewidth and intensity by considering the exciton-phonon interaction with both acoustic and optical phonons using Bose-Einstein statistical factors. With rise in temperature we observed a fall in the transition energy (emission redshift), matrix element, Fermi factor and quasi Fermi separation, with reduction in intraband state gaps and increased interband coupling. Also, there was a fall in the PL intensity, along with spectral broadening due to an intraband scattering effect. The predicted transition energy values and simulated PL spectra at varying temperatures exhibit appreciable consistency with experimental results. Our findings have important implications for application of NPLs in optoelectronic devices, such as NPL lasers and LEDs, operating much above room temperature.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
PLDA-Based Diarization of Telephone Conversations
Authors:
Ahmet E. Bulut,
Hakan Demir,
Yusuf Ziya Isik,
Hakan Erdogan
Abstract:
This paper investigates the application of the probabilistic linear discriminant analysis (PLDA) to speaker diarization of telephone conversations. We introduce using a variational Bayes (VB) approach for inference under a PLDA model for modeling segmental i-vectors in speaker diarization. Deterministic annealing (DA) algorithm is imposed in order to avoid local optimal solutions in VB iterations.…
▽ More
This paper investigates the application of the probabilistic linear discriminant analysis (PLDA) to speaker diarization of telephone conversations. We introduce using a variational Bayes (VB) approach for inference under a PLDA model for modeling segmental i-vectors in speaker diarization. Deterministic annealing (DA) algorithm is imposed in order to avoid local optimal solutions in VB iterations. We compare our proposed system with a well-known system that applies k-means clustering on principal component analysis (PCA) coefficients of segmental i-vectors. We used summed channel telephone data from the National Institute of Standards and Technology (NIST) 2008 Speaker Recognition Evaluation (SRE) as the test set in order to evaluate the performance of the proposed system. We achieve about 20% relative improvement in Diarization Error Rate (DER) compared to the baseline system.
△ Less
Submitted 29 September, 2017;
originally announced October 2017.
-
Simple and Complex Metafluids and Metastructures with Sharp Spectral Features in a Broad Extinction Spectrum: Particle-Particle Interactions and Testing the Limits of the Beer-Lambert Law
Authors:
Lucas V. Besteiro,
Kivanc Gungor,
Hilmi Volkan Demir,
Alexander O. Govorov
Abstract:
Metallic nanocrystals (NCs) are useful instruments for light manipulation around the visible spectrum. As their plasmonic resonances depend heavily on the NC geometry, modern fabrication techniques afford a great degree of control over their optical responses. We take advantage of this fact to create optical filters in the visible-near IR. Our systems show an extinction spectrum that covers a wide…
▽ More
Metallic nanocrystals (NCs) are useful instruments for light manipulation around the visible spectrum. As their plasmonic resonances depend heavily on the NC geometry, modern fabrication techniques afford a great degree of control over their optical responses. We take advantage of this fact to create optical filters in the visible-near IR. Our systems show an extinction spectrum that covers a wide range of wavelengths (UV to mid-IR), while featuring a narrow transparency band around a wavelength of choice. We achieve this by carefully selecting the geometries of a collection of NCs with narrow resonances that cover densely the spectrum from UV to mid-IR except for the frequencies targeted for transmission. This fundamental design can be executed in different kinds of systems, including a solution of colloidal metal NCs (metafluids), a structured planar metasurface or a combination of both. Along with the theory, we report experimental results, showing metasurface realizations of the system, and we discuss the strengths and weaknesses of these different approaches, paying particular attention to particle-particle interaction and to what extent it hinders the intended objective by shifting and modifying the profile of the planned resonances through the hybridization of their plasmonic modes. We have found that the Beer-Lambert law is very robust overall and is violated only upon aggregation or in configurations with nearly-touching NCs. This striking property favors the creation of metafluids with a narrow transparency window, which are investigated here.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Copper-Doped Colloidal Semiconductor Quantum Wells for Luminescent Solar Concentrators
Authors:
Manoj Sharma,
Kivanc Gungor,
Aydan Yeltik,
Murat Olutas,
Burak Guzelturk,
Yusuf Kelestemur,
Talha Erdem,
Hilmi Volkan Demir
Abstract:
Do** of bulk semiconductors has revealed widespread success in optoelectronic applications. In the past few decades, substantial effort has been engaged for do** at the nanoscale. Recently, doped zero-dimensional quantum dots made of semiconductor nanocrystals have been demonstrated to be promising materials for luminescent solar concentrators (LSCs) as they can be engineered for providing Sto…
▽ More
Do** of bulk semiconductors has revealed widespread success in optoelectronic applications. In the past few decades, substantial effort has been engaged for do** at the nanoscale. Recently, doped zero-dimensional quantum dots made of semiconductor nanocrystals have been demonstrated to be promising materials for luminescent solar concentrators (LSCs) as they can be engineered for providing Stokes-shifted tunable emission in the solar spectrum. However, existing doped colloidal quantum dots suffer from moderately low quantum efficiency and intrinsically small absorption cross-section, which together fundamentally limit their effective usage. Here, we show the first account of copper do** into two-dimensional atomically flat CdSe colloidal quantum wells. Copper do** via post-synthesis partial cation exchange into 3-5 monolayers of CdSe and CdSe/CdS core-shell colloidal quantum wells (CQWs) enables Stokes-shifted, tunable dopant induced highly efficient photoluminescence emission having high quantum efficiencies (>43%), accompanied by an order of magnitude higher absorption cross-section than that of the doped quantum dots. Based on these exceptional properties, we demonstrated a flexible prototype luminescent solar concentrators using these newly synthesized doped colloidal quantum wells. These findings may open up new directions for deployment of CQWs in LSCs for advanced solar light harvesting technologies.
△ Less
Submitted 21 June, 2016;
originally announced June 2016.
-
Plasmonic Metastructures and Nanocomposites with a Narrow Transparency Window in a Broad Extinction Spectrum
Authors:
Hui Zhang,
Hilmi Volkan Demir,
Alexander O. Govorov
Abstract:
We propose and describe plasmonic nanomaterials with unique optical properties. These nanostructured materials strongly attenuate light in a broad wavelength interval ranged from 400 nm to 5 um but exhibit a narrow transparency window centered at a given wavelength. The main elements are nanorods and nano-crosses of variable sizes. The nanomaterial can be designed as a solution, nanocomposite film…
▽ More
We propose and describe plasmonic nanomaterials with unique optical properties. These nanostructured materials strongly attenuate light in a broad wavelength interval ranged from 400 nm to 5 um but exhibit a narrow transparency window centered at a given wavelength. The main elements are nanorods and nano-crosses of variable sizes. The nanomaterial can be designed as a solution, nanocomposite film, metastructure or aerosol. The principle of the formation of the transparency window in the abroad extinction spectrum is based on the narrow lines of longitudinal plasmons of single nanorods and nanorod complexes. To realize the spectrum with a transmission window, we design a nanocomposite material as a mixture of nanorods of different sizes. Simultaneously, we exclude nanorods of certain length from the nanorod ensemble. The width of the plasmonic transparency window is determined by the intrinsic and radiative broadenings of the nanocrystal plasmons. We also describe the effect of narrowing of the transparency window with increasing the concentration of nanocrystals. Two well-established technologies can be used to fabricate such nano- and metamaterials, the colloidal synthesis and lithography. Nanocomposites proposed here can be used as optical materials and coatings for shielding of electromagnetic radiation in a wide spectral interval with a simultaneous possibility of communication using a narrow transparency window.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
-
Generalized Theory of Forster-type Nonradiative Energy Transfer in Nanostructures with Mixed Dimensionality
Authors:
P. L. Hernandez-Martinez,
A. O. Govorov,
H. V. Demir
Abstract:
Forster-type nonradiative energy transfer (NRET) is widely used, especially utilizing nanostructures in different combinations and configurations. However, the existing well-accepted Forster theory is only for the case of a single particle serving as a donor together with another particle serving as an acceptor. There are also other special cases previously studied; however, there is no complete p…
▽ More
Forster-type nonradiative energy transfer (NRET) is widely used, especially utilizing nanostructures in different combinations and configurations. However, the existing well-accepted Forster theory is only for the case of a single particle serving as a donor together with another particle serving as an acceptor. There are also other special cases previously studied; however, there is no complete picture and unified understanding. Therefore, there is a strong need for a complete theory that models Forster-type NRET for the cases of mixed dimensionality including all combinations and configurations. We report a generalized theory for the Forster-type NRET, which includes the derivation of the effective dielectric function due to the donor in different confinement geometries and the derivation of transfer rates distance dependencies due to the acceptor in different confinement geometries, resulting in a complete picture and understanding of the mixed dimensionality.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
Andreev Level Spectroscopy and Josephson Current Switching in a 3-Terminal Josephson Junction
Authors:
H. Tolga Ilhan,
H. Volkan Demir,
Philip F. Bagwell
Abstract:
We calculate the electrical currents through a superconductor - insulator - superconductor junction which is also weakly coupled to a normal metal side probe. The voltage $V$ applied to the normal metal terminal controls the occupation of Andreev energy levels $E_n$, and therefore controls the Josephson current flowing through these levels. Whenever the probe voltage crosses an Andreev level, th…
▽ More
We calculate the electrical currents through a superconductor - insulator - superconductor junction which is also weakly coupled to a normal metal side probe. The voltage $V$ applied to the normal metal terminal controls the occupation of Andreev energy levels $E_n$, and therefore controls the Josephson current flowing through these levels. Whenever the probe voltage crosses an Andreev level, the Josephson current changes abruptly by an amount equal to the current flowing through the Andreev level. The differential conductance along the normal metal terminal permits spectroscopy of the Andreev levels. In a short junction $(L \ll ξ_0)$, the critical current switches abruptly from the Ambegaokar-Baratoff value to zero when the probe voltage is approximately equal to the superconducting energy gap ($|eV| \simeq Δ$). The magnitude of the Josephson current switching in a long junction $(L \gg ξ_0)$, and the range of probe voltages over which the Josephson current differs from its equilibrium value, are much smaller than for three-terminal ballistic superconductor - normal metal - superconductor junctions.
△ Less
Submitted 26 June, 1998; v1 submitted 23 December, 1997;
originally announced December 1997.