Showing 1–9 of 9 results for author: Del Vecchio, C

On Convex Data-Driven Inverse Optimal Control for Nonlinear, Non-stationary and Stochastic Systems

Authors: Emiland Garrabe, Hozefa Jesawada, Carmen Del Vecchio, Giovanni Russo

Abstract: This paper is concerned with a finite-horizon inverse control problem, which has the goal of reconstructing, from observations, the possibly non-convex and non-stationary cost driving the actions of an agent. In this context, we present a result enabling cost reconstruction by solving an optimization problem that is convex even when the agent cost is not and when the underlying dynamics is nonline… ▽ More This paper is concerned with a finite-horizon inverse control problem, which has the goal of reconstructing, from observations, the possibly non-convex and non-stationary cost driving the actions of an agent. In this context, we present a result enabling cost reconstruction by solving an optimization problem that is convex even when the agent cost is not and when the underlying dynamics is nonlinear, non-stationary and stochastic. To obtain this result, we also study a finite-horizon forward control problem that has randomized policies as decision variables. We turn our findings into algorithmic procedures and show the effectiveness of our approach via in-silico and hardware validations. All experiments confirm the effectiveness of our approach. △ Less

Submitted 26 June, 2024; v1 submitted 24 June, 2023; originally announced June 2023.

Comments: 17 pages, 5 figures. An early version of this paper with only a sketch of the proof for one of the results and without the hardware validation was presentation at the 62nd IEEE Conference on Decision and Control. arXiv admin note: text overlap with arXiv:2303.17957

On a Probabilistic Approach for Inverse Data-Driven Optimal Control

Authors: Émiland Garrabé, Hozefa Jesawada, Carmen Del Vecchio, Giovanni Russo

Abstract: We consider the problem of estimating the possibly non-convex cost of an agent by observing its interactions with a nonlinear, non-stationary and stochastic environment. For this inverse problem, we give a result that allows to estimate the cost by solving a convex optimization problem. To obtain this result we also tackle a forward problem. This leads to the formulation of a finite-horizon optima… ▽ More We consider the problem of estimating the possibly non-convex cost of an agent by observing its interactions with a nonlinear, non-stationary and stochastic environment. For this inverse problem, we give a result that allows to estimate the cost by solving a convex optimization problem. To obtain this result we also tackle a forward problem. This leads to the formulation of a finite-horizon optimal control problem for which we show convexity and find the optimal solution. Our approach leverages certain probabilistic descriptions that can be obtained both from data and/or from first-principles. The effectiveness of our results, which are turned in an algorithm, is illustrated via simulations on the problem of estimating the cost of an agent that is stabilizing the unstable equilibrium of a pendulum. △ Less

Submitted 21 July, 2023; v1 submitted 31 March, 2023; originally announced March 2023.

Comments: Accepted for presentation at the 62nd IEEE Conference on Decision and Control, CDC 2023

Lateral constraint for thin glass shell: analysis of the requirements and conceptual design for a segmented active mirror

Authors: Marcello Agostino Scalera, Runa Briguglio, Ciro Del Vecchio, Marco Xompero, Marco Riva

Abstract: The latest high-performance telescopes for deep space observation employ very large primary mirrors that are made of smaller segments, like the JWST which employs monolithic beryllium hexagonal segments. A very promising development stage of these systems is to make them active and to operate on their reflective surfaces to change their shape and compensate for aberrations as well as to perform a… ▽ More The latest high-performance telescopes for deep space observation employ very large primary mirrors that are made of smaller segments, like the JWST which employs monolithic beryllium hexagonal segments. A very promising development stage of these systems is to make them active and to operate on their reflective surfaces to change their shape and compensate for aberrations as well as to perform a very precise alignment. This is possible by employing a reference body that stores actuators to modify the shape of the shell, like in the SPLATT project where voice coil actuators are used. However, the lack of physical contact between the main body and shell places, along with the many advantages related to the physical decoupling of the two bodies, some concerns related to the retaining of the shell under all the possible acceleration conditions affecting the system during the mission lifetime. This paper aims to study the acceleration environment affecting the spacecraft during its lifetime and to use it as a baseline for operational requirements of a retaining system for the shells. Any solution is selected in this paper to leave complete freedom for the development of a constraining system, just some are qualitatively discussed. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Comments: 9 pages, 3 figures. Proceedings of the 14th International Conference on Space Optics ICSO2022, held in Dubrovnik (Croatia) 3-7 october 2022

Contactless actuators and pyramid wavefront sensor, the SPLATT concept for space active optics: an overview of the project and the last laboratory results

Authors: Runa Briguglio, Marco Xompero, Marcello Scalera, Marco Riva, Ciro Del Vecchio, Luca Carbonaro, Carmelo Arcidiacono, Guido Agapito, Enrico Pinna, Alessandro Terreri, Fernando Pedichini, Riccardo Muradore, Matteo Tintori, Daniele Gallieni Roberto Biasi, Christian Patauner, Alessandro Zuccaro Marchi

Abstract: In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the opti… ▽ More In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the optical laboratory, two main elements: an active segmented primary with contactless actuators and a pyramid wavefront sensor (PWFS) to drive the correction chain. The key point is the synergy between them: the sensitivity of the PWFS and the intrinsic stability of a contactless-actuated mirror segment. Voice-coil, contactless actuators are in facts a natural decoupling layer between the payload and the optical surface and can suppress the high frequency vibration as we verified in the lab. We subjected a 40 cm diameter prototype with 19 actuators to an externally injected vibration spectrum; we then measured optically the reduction of vibrations when the optical surface is floating controlled by the actuators, thus validating the concept at the first stage of the design. The PWFS, which is largely adopted on ground-based telescope, is a pupil-conjugated sensor and offers a user-selectable sampling and capture range, in order to match different use cases; it is also more sensitive than Shack-Hartmann sensor especially at the low-mid spatial scales. We run a set of numerical simulations with the PWFS measuring the misalignment and phase steps of a JWST-like primary mirrors: we investigated the PWFS sensitivity in the sub-nanometer regime in presence of photon and detector noise, and with guide star magnitudes in the range 8 to 14. In the paper we discuss the outcomes of the project and present a possible roadmap for further developments. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Comments: 10 pages, 11 figures. Proceeding of the International Conference on Space Optics ICSO2022, 14th edition, held in Dubrovnik (Croatia) in 3-7 october 2022

A Model-Based Reinforcement Learning Approach for PID Design

Authors: Hozefa Jesawada, Amol Yerudkar, Carmen Del Vecchio, Navdeep Singh

Abstract: Proportional-integral-derivative (PID) controller is widely used across various industrial process control applications because of its straightforward implementation. However, it can be challenging to fine-tune the PID parameters in practice to achieve robust performance. The paper proposes a model-based reinforcement learning (RL) framework to design PID controllers leveraging the probabilistic i… ▽ More Proportional-integral-derivative (PID) controller is widely used across various industrial process control applications because of its straightforward implementation. However, it can be challenging to fine-tune the PID parameters in practice to achieve robust performance. The paper proposes a model-based reinforcement learning (RL) framework to design PID controllers leveraging the probabilistic inference for learning control (PILCO) method and Kullback-Leibler divergence (KLD). Since PID controllers have a much more interpretable control structure than a network basis function, an optimal policy given by PILCO is transformed into a set of robust PID tuning parameters for underactuated mechanical systems. The presented method is general and can blend with several model-based and model-free algorithms. The performance of the devised PID controllers is demonstrated with simulation studies for a benchmark cart-pole system under disturbances and system parameter uncertainties. △ Less

Submitted 7 June, 2022; originally announced June 2022.

A prototype of a large tunable Fabry-Perot interferometer for solar spectroscopy

Authors: V. Greco, A. Sordini, G. Cauzzi, F. Cavallini, C. Del Vecchio, L. Giovannelli, F. Berrilli, D. Del Moro, K. Reardon, K. Pietraszewski

Abstract: Large Fabry-Perot Interferometers are used in a variety of astronomical instrumentation, including spectro-polarimeters for 4-meter class solar telescopes. In this work we comprehensively characterize the cavity of a prototype 150 mm Fabry-Perot interferometer, sporting a novel, fully symmetric design. Of note, we define a new method to properly assess the gravity effects on the interferometer's c… ▽ More Large Fabry-Perot Interferometers are used in a variety of astronomical instrumentation, including spectro-polarimeters for 4-meter class solar telescopes. In this work we comprehensively characterize the cavity of a prototype 150 mm Fabry-Perot interferometer, sporting a novel, fully symmetric design. Of note, we define a new method to properly assess the gravity effects on the interferometer's cavity when the system is used in either the vertical or horizontal configuration, both typical of solar observations. We show that the symmetric design very effectively limits the combined effects of pre-load and gravity forces to only a few nm over a 120 mm diameter illuminated surface, with gravity contributing about 2 nm peak-to-valley (0.3 nm rms) in either configuration. We confirm a variation of the tilt between the plates of the interferometer during the spectral scan, which can be mitigated with appropriate corrections to the spacing commands. Finally, we show that the dynamical response of the new system fully satisfies typical operational scenarios. We conclude that large, fully symmetric Fabry-Perot interferometers can be safely used within solar instrumentation in both, horizontal and vertical position, with the latter better suited to limiting the overall volume occupied by such an instrument. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Comments: 18 pages; accepted for publication in PASP. The animation for Fig. 9 can be found at: https://drive.google.com/file/d/1Jgr8ntRINv-VFXwQ5vzC4DPkU6DXjYmv/view?usp=sharing

Ariel: Enabling planetary science across light-years

Authors: Giovanna Tinetti, Paul Eccleston, Carole Haswell, Pierre-Olivier Lagage, Jérémy Leconte, Theresa Lüftinger, Giusi Micela, Michel Min, Göran Pilbratt, Ludovic Puig, Mark Swain, Leonardo Testi, Diego Turrini, Bart Vandenbussche, Maria Rosa Zapatero Osorio, Anna Aret, Jean-Philippe Beaulieu, Lars Buchhave, Martin Ferus, Matt Griffin, Manuel Guedel, Paul Hartogh, Pedro Machado, Giuseppe Malaguti, Enric Pallé , et al. (293 additional authors not shown)

Abstract: Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths.… ▽ More Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths. It is the first mission dedicated to measuring the chemical composition and thermal structures of hundreds of transiting exoplanets, enabling planetary science far beyond the boundaries of the Solar System. The payload consists of an off-axis Cassegrain telescope (primary mirror 1100 mm x 730 mm ellipse) and two separate instruments (FGS and AIRS) covering simultaneously 0.5-7.8 micron spectral range. The satellite is best placed into an L2 orbit to maximise the thermal stability and the field of regard. The payload module is passively cooled via a series of V-Groove radiators; the detectors for the AIRS are the only items that require active cooling via an active Ne JT cooler. The Ariel payload is developed by a consortium of more than 50 institutes from 16 ESA countries, which include the UK, France, Italy, Belgium, Poland, Spain, Austria, Denmark, Ireland, Portugal, Czech Republic, Hungary, the Netherlands, Sweden, Norway, Estonia, and a NASA contribution. △ Less

Submitted 10 April, 2021; originally announced April 2021.

Comments: Ariel Definition Study Report, 147 pages. Reviewed by ESA Science Advisory Structure in November 2020. Original document available at: https://www.cosmos.esa.int/documents/1783156/3267291/Ariel_RedBook_Nov2020.pdf/

Report number: ESA/SCI(2020)1

The EChO science case

Authors: Giovanna Tinetti, Pierre Drossart, Paul Eccleston, Paul Hartogh, Kate Isaak, Martin Linder, Christophe Lovis, Giusi Micela, Marc Ollivier, Ludovic Puig, Ignasi Ribas, Ignas Snellen, Bruce Swinyard. France Allard, Joanna Barstow, James Cho, Athena Coustenis, Charles Cockell, Alexandre Correia, Leen Decin, Remco de Kok, Pieter Deroo, Therese Encrenaz, Francois Forget, Alistair Glasse, Caitlin Griffith , et al. (326 additional authors not shown)

Abstract: The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional divers… ▽ More The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional diversity observed as compared to the Solar System? EChO (Exoplanet Characterisation Observatory) has been designed as a dedicated survey mission for transit and eclipse spectroscopy capable of observing a large and diverse planet sample within its four-year mission lifetime. EChO can target the atmospheres of super-Earths, Neptune-like, and Jupiter-like planets, in the very hot to temperate zones (planet temperatures of 300K-3000K) of F to M-type host stars. Over the next ten years, several new ground- and space-based transit surveys will come on-line (e.g. NGTS, CHEOPS, TESS, PLATO), which will specifically focus on finding bright, nearby systems. The current rapid rate of discovery would allow the target list to be further optimised in the years prior to EChO's launch and enable the atmospheric characterisation of hundreds of planets. Placing the satellite at L2 provides a cold and stable thermal environment, as well as a large field of regard to allow efficient time-critical observation of targets randomly distributed over the sky. A 1m class telescope is sufficiently large to achieve the necessary spectro-photometric precision. The spectral coverage (0.5-11 micron, goal 16 micron) and SNR to be achieved by EChO, thanks to its high stability and dedicated design, would enable a very accurate measurement of the atmospheric composition and structure of hundreds of exoplanets. △ Less

Submitted 19 February, 2015; originally announced February 2015.

Comments: 50 pages, 30 figures. Experimental Astronomy

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Authors: Ciro Del Vecchio, Guido Agapito, Carmelo Arcidiacono, Luca Carbonaro, Fabrizio Marignetti, Enzo De Santis, Valdemaro Biliotti, Armando Riccardi

Abstract: Recently, Adaptive Secondary Mirrors showed excellent on-sky results in the Near Infrared wavelengths. They currently provide 30mm inter-actuator spacing and about 1 kHz bandwidth. Pushing these devices to be operated at visible wavelengths is a challenging task. Compared to the current systems, working in the infrared, the more demanding requirements are the higher spatial resolution and the grea… ▽ More Recently, Adaptive Secondary Mirrors showed excellent on-sky results in the Near Infrared wavelengths. They currently provide 30mm inter-actuator spacing and about 1 kHz bandwidth. Pushing these devices to be operated at visible wavelengths is a challenging task. Compared to the current systems, working in the infrared, the more demanding requirements are the higher spatial resolution and the greater correction bandwidth. In fact, the turbulence scale is shorter and the parameter variation is faster. Typically, the former is not larger than 25 mm (projected on the secondary mirror) and the latter is 2 kHz, therefore the actuator has to be more slender and faster than the current ones. With a soft magnetic composite core, a dual-stator and a single-mover, VRALA, the actuator discussed in this paper, attains unprecedented performances with a negligible thermal impact. Pre-sha** the current required to deliver a given stroke greatly simplifies the control system, whose output supplies the current generator. As the inductance depends on the mover position, the electronics of this generator, provided with an inductance measure circuit, works also as a displacement sensor, supplying the control system with an accurate feed-back signal. A preliminary prototype, built according to the several FEA thermo-magnetic analyses, has undergone some preliminary laboratory tests. The results of these checks, matching the design results in terms of power and force, show that the the magnetic design addresses the severe specifications. △ Less

Submitted 4 September, 2012; originally announced September 2012.

Journal ref: Proc. SPIE Vol. 8447 (2012)