-
Effect of the atomic structure of complexions on the active disconnection mode during shear-coupled grain boundary motion
Authors:
Swetha Pemma,
Rebecca Janisch,
Gerhard Dehm,
Tobias Brink
Abstract:
The migration of grain boundaries leads to grain growth in polycrystals and is one mechanism of grain-boundary-mediated plasticity, especially in nanocrystalline metals. This migration is due to the movement of dislocation-like defects, called disconnections, which couple to externally applied shear stresses. While this has been studied in detail in recent years, the active disconnection mode was…
▽ More
The migration of grain boundaries leads to grain growth in polycrystals and is one mechanism of grain-boundary-mediated plasticity, especially in nanocrystalline metals. This migration is due to the movement of dislocation-like defects, called disconnections, which couple to externally applied shear stresses. While this has been studied in detail in recent years, the active disconnection mode was typically associated with specific macroscopic grain boundary parameters. We know, however, that varying microscopic degrees of freedom can lead to different atomic structures without changing the macroscopic parameters. These structures can transition into each other and are called complexions. Here, we investigate $[11\overline{1}]$ symmetric tilt boundaries in fcc metals, where two complexions -- dubbed domino and pearl -- were observed before. We compare these two complexions for two different misorientations: In $\Sigma19$b $[11\overline{1}]$ $(178)$ boundaries, both complexions exhibit the same disconnection mode. The critical stress for nucleation and propagation of disconnections is nevertheless different for domino and pearl. At low temperatures, the Peierls-like barrier for disconnection propagation dominates, while at higher temperatures the nucleation is the limiting factor. For $Σ$7 $[11\overline{1}]$ $(145)$ boundaries, we observed a larger difference. The domino and pearl complexions migrate in different directions under the same boundary conditions. While both migration directions are possible crystallographically, an analysis of the complexions' structural motifs and the disconnection core structures reveals that the choice of disconnection mode and therefore migration direction is directly due to the atomic structure of the grain boundary.
△ Less
Submitted 8 May, 2024; v1 submitted 19 April, 2024;
originally announced April 2024.
-
Nanoscale brittle-to-ductile transition of the C15 CaAl$_2$ Laves phase
Authors:
Anwesha Kanjilal,
Ali Ahmadian,
Martina Freund,
Pei-Ling Sun,
Sandra Korte-Kerzel,
Gerhard Dehm,
James P. Best
Abstract:
The influence of temperature on the deformation behaviour of the C15 CaAl$_2$ Laves phase, a key constituent for enhancing the mechanical properties of Mg alloys up to service temperatures of 200 °C, remains largely unexplored. This study presents, for the first time, the nanoscale brittle-to-ductile transition (BDT) of this intermetallic phase through in situ testing including nanoindentation, sc…
▽ More
The influence of temperature on the deformation behaviour of the C15 CaAl$_2$ Laves phase, a key constituent for enhancing the mechanical properties of Mg alloys up to service temperatures of 200 °C, remains largely unexplored. This study presents, for the first time, the nanoscale brittle-to-ductile transition (BDT) of this intermetallic phase through in situ testing including nanoindentation, scratch testing, and micropillar splitting conducted at elevated temperatures. By correlating observations from these techniques, changes in deformation of CaAl$_2$ were identified in relation to temperature. High-temperature nanoindentation quantitatively determined the temperature range for the BDT, and revealed that CaAl$_2$ undergoes a BDT at ~0.55T$_m$, exhibiting an intermediate region of microplasticity. A noticeable decrease in nanoindentation hardness was observed at ~450-500 °C, accompanied by an increase in residual indent size, while indentation cracking was not observed above 300 °C. Results from high-temperature micropillar splitting revealed cracking and brittle pillar splitting up to 300 °C, with an increase in apparent fracture toughness from 0.9 $\pm$ 0.1 MPa$\cdot\sqrt m$ to 2.8 $\pm$ 0.3 MPa$\cdot\sqrt m$, and subsequent crack-free plastic deformation from 400 °C. Transmission electron microscopy analysis of the deformed material from nanoindentation revealed that the BDT of CaAl$_2$ may be attributed to enhanced dislocation plasticity with increasing temperature.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
Fracture of the $C$15 CaAl$_2$ Laves phase at small length-scales
Authors:
James P. Best,
Anwesha Kanjilal,
Alireza Ghafarollahi,
Uzair Rehman,
Chunhua Tian,
Hanna Bishara,
M. Kamran Bhat,
Leon Christiansen,
Erik Bitzek,
Frank Stein,
Gerhard Dehm
Abstract:
The cubic $C$15 CaAl$_2$ Laves phase is a crucial brittle intermetallic precipitate in Mg-Al-Ca alloys. Although knowledge of the mechanical properties of coexisting phases is essential for improved alloy design, the fracture toughness is not yet studied experimentally due to the need for miniaturised testing. Here, micropillar splitting and microcantilever bending are used to experimentally deter…
▽ More
The cubic $C$15 CaAl$_2$ Laves phase is a crucial brittle intermetallic precipitate in Mg-Al-Ca alloys. Although knowledge of the mechanical properties of coexisting phases is essential for improved alloy design, the fracture toughness is not yet studied experimentally due to the need for miniaturised testing. Here, micropillar splitting and microcantilever bending are used to experimentally determine the toughness of CaAl$_2$. It is found that the toughness value of ~1 $MPa\cdot\sqrt m$ from pillar splitting is largely insensitive to sample heat treatment, ion beam used for fabrication, micropillar diameter, and surface orientation. From nanoindentation supported by electron channelling contrast imaging and backscatter diffraction, fracture is observed to take place mostly on {011} planes. Atomistic fracture simulations on a model $C$15 Laves phase showed that the preference of {011} cleavage planes over the more energetically favourable {111} is due to lattice trap** and kinetics controlling fracture. Using rectangular microcantilever bending tests where the notch plane was misoriented to the closest possible {112} cleavage plane by ~8°, and the closest {001}, {011} and {111} plane by >20°, a toughness of ca. 2 $MPa\cdot\sqrt m$ was determined along with the electron microscopy observation of significant deviations of the crack path, demonstrating that preferential crystallographic cleavage planes determine the toughness in this material. Further investigation using pentagonal microcantilevers with precise alignment of the notch with the cleavage planes revealed similar fracture toughness values for different low-index planes. The results presented here are the first detailed experimental study of fracture toughness of the $C$15 CaAl$_2$ Laves phase, and can be understood in terms of crack plane and crack front dependent fracture toughness.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Roadmap on Data-Centric Materials Science
Authors:
Stefan Bauer,
Peter Benner,
Tristan Bereau,
Volker Blum,
Mario Boley,
Christian Carbogno,
C. Richard A. Catlow,
Gerhard Dehm,
Sebastian Eibl,
Ralph Ernstorfer,
Ádám Fekete,
Lucas Foppa,
Peter Fratzl,
Christoph Freysoldt,
Baptiste Gault,
Luca M. Ghiringhelli,
Sajal K. Giri,
Anton Gladyshev,
Pawan Goyal,
Jason Hattrick-Simpers,
Lara Kabalan,
Petr Karpov,
Mohammad S. Khorrami,
Christoph Koch,
Sebastian Kokott
, et al. (36 additional authors not shown)
Abstract:
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) a…
▽ More
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research.
△ Less
Submitted 1 May, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Fabrication and extreme micromechanics of additive metal microarchitectures
Authors:
Sung-Gyu Kang,
Barbara Bellon,
Lalithkumar Bhaskar,
Siyuan Zhang,
Alexander Gotz,
Janis Wirth,
Benjamin Apeleo Zubiri,
Szilvia Kalacska,
Manish Jain,
Amit Sharma,
Wabe Koelmans,
Giorgio Ercolano,
Erdmann Spiecker,
Johann Michler,
Jakob Schwiedrzik,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
The mechanical performance of metallic metamaterials with 3-dimensional solid frames is typically a combination of the geometrical effect ("architecture") and the characteristic size effects of the base material ("microstructure"). In this study, for the first time, the temperature- and rate-dependent mechanical response of copper microlattices has been investigated. The microlattices were fabrica…
▽ More
The mechanical performance of metallic metamaterials with 3-dimensional solid frames is typically a combination of the geometrical effect ("architecture") and the characteristic size effects of the base material ("microstructure"). In this study, for the first time, the temperature- and rate-dependent mechanical response of copper microlattices has been investigated. The microlattices were fabricated via a localized electrodeposition in liquid (LEL) process which enables high-precision additive manufacturing of metal at the micro-scale. The metal microlattices possess a unique microstructure with micron sized grains that are rich with randomly oriented growth twins and near-ideal nodal connectivity. Importantly, copper microlattices exhibited unique temperature (-150 and 25 degree C) and strain rate (0.001~100 s-1) dependent deformation behavior during in situ micromechanical testing. Systematic compression tests of fully dense copper micropillars, equivalent in diameter and length to the struts of the microlattice at comparable extreme loading conditions, allow us to investigate the intrinsic deformation mechanism of copper. Combined with the post-mortem microstructural analysis, substantial shifts in deformation mechanisms depending on the temperature and strain rate were revealed. On the one hand, at room temperature (25 degree C), dislocation slip based plastic deformation occurs and leads to a localized deformation of the micropillars. On the other hand, at cryogenic temperature (-150 degree C), mechanical twinning occurs and leads to relatively homogeneous deformation of the micropillars. Based on the intrinsic deformation mechanisms of copper, the temperature and strain rate dependent deformation behavior of microlattices could be explained.
△ Less
Submitted 3 April, 2024; v1 submitted 23 November, 2023;
originally announced November 2023.
-
Stable nanofacets in [111] tilt grain boundaries of face-centered cubic metals
Authors:
Tobias Brink,
Lena Langenohl,
Swetha Pemma,
Christian H. Liebscher,
Gerhard Dehm
Abstract:
Grain boundaries can dissociate into facets if that reduces their excess energy. This, however, introduces line defects at the facet junctions, which present a driving force to grow the facets in order to reduce the total number of junctions and thus the system's energy. Often, micrometer-sized facet lengths are observed and facet growth only arrests for kinetic reasons. So far, energetically stab…
▽ More
Grain boundaries can dissociate into facets if that reduces their excess energy. This, however, introduces line defects at the facet junctions, which present a driving force to grow the facets in order to reduce the total number of junctions and thus the system's energy. Often, micrometer-sized facet lengths are observed and facet growth only arrests for kinetic reasons. So far, energetically stable, finite-sized facets have not been observed, even though theoretical stability conditions have already been proposed. Here, we show a case where nanometer-sized facets are indeed stable compared to longer facets in [111] tilt grain boundaries in Cu by atomistic simulation and transmission electron microscopy. The facet junctions lack a Burgers vector component, which is unusual, but which removes the main energy cost of facet junctions. Only attractive interactions via line forces remain, which result from a discontinuity of grain boundary excess stress at the junction. Atomistic simulations predict that the same phenomenon also occurs in at least Al and Ag.
△ Less
Submitted 22 April, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
Microstructure of a spark-plasma-sintered Fe2VAl-type Heusler alloy for thermoelectric application
Authors:
Leonie Gomell,
Imants Dirba,
Hanna Bishara,
Zhongji Sun,
Łukasz. Żrodowski,
Tomasz Choma,
Bartosz Morończyk,
Gerhard Dehm,
Konstantin P. Skokov,
Oliver Gutfleisch,
B. Gault
Abstract:
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects, their structure, and composition. Here, we focus on a full-Heusler Fe2VAl-based compound that is one of the most promising thermoelectric materials containing…
▽ More
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects, their structure, and composition. Here, we focus on a full-Heusler Fe2VAl-based compound that is one of the most promising thermoelectric materials containing only Earth-abundant, non-toxic elements. A Fe2VTa0.05Al0.95 cast alloy was atomized under a nitrogen-rich atmosphere to induce nitride precipitation. Nanometer- to micrometer-scale microstructural investigations by advanced scanning electron microscopy and atom probe tomography (APT) are performed on the powder first and then on the material consolidated by spark-plasma sintering for an increasing time. APT reveals an unexpected pick-up of additional impurities from atomization, namely W and Mo. The microstructure is then correlated with local and global measurements of the thermoelectric properties. At grain boundaries, segregation and precipitation locally reduce the electrical resistivity, as evidenced by in-situ four-point probe measurements. The final microstructure contains a hierarchy of structural defects, including individual point defects, dislocations, grain boundaries, and precipitates, that allow for a strong decrease in thermal conductivity. In combination, these effects provide an appreciable increase in thermoelectric performance.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Effect of the atomic structure of complexions on the active disconnection mode during shear-coupled grain boundary motion
Authors:
Swetha Pemma,
Rebecca Janisch,
Gerhard Dehm,
Tobias Brink
Abstract:
The migration of grain boundaries leads to grain growth in polycrystals and is one mechanism of grain-boundary-mediated plasticity, especially in nanocrystalline metals. This migration is due to the movement of dislocation-like defects, called disconnections, which couple to externally applied shear stresses. While this has been studied in detail in recent years, the active disconnection mode was…
▽ More
The migration of grain boundaries leads to grain growth in polycrystals and is one mechanism of grain-boundary-mediated plasticity, especially in nanocrystalline metals. This migration is due to the movement of dislocation-like defects, called disconnections, which couple to externally applied shear stresses. While this has been studied in detail in recent years, the active disconnection mode was typically associated with specific macroscopic grain boundary parameters. We know, however, that varying microscopic degrees of freedom can lead to different atomic structures without changing the macroscopic parameters. These structures can transition into each other and are called complexions. Here, we investigate $[11\overline{1}]$ symmetric tilt boundaries in fcc metals, where two complexions -- dubbed domino and pearl -- were observed before. We compare these two complexions for two different misorientations: In $\Sigma19$b $[11\overline{1}]$ $(178)$ boundaries, both complexions exhibit the same disconnection mode. The critical stress for nucleation and propagation of disconnections is nevertheless different for domino and pearl. At low temperatures, the Peierls-like barrier for disconnection propagation dominates, while at higher temperatures the nucleation is the limiting factor. For $Σ$7 $[11\overline{1}]$ $(145)$ boundaries, we observed a larger difference. The domino and pearl complexions migrate in different directions under the same boundary conditions. While both migration directions are possible crystallographically, an analysis of the complexions' structural motifs and the disconnection core structures reveals that the choice of disconnection mode and therefore migration direction is directly due to the atomic structure of the grain boundary.
△ Less
Submitted 10 May, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Constructing phase diagrams for defects by correlated atomic-scale characterization
Authors:
Xuyang Zhou,
Prince Mathews,
Benjamin Berkels,
Saba Ahmad,
Amel Shamseldeen Ali Alhassan,
Philipp Keuter,
Jochen M. Schneider,
Dierk Raabe,
Jörg Neugebauer,
Gerhard Dehm,
Tilmann Hickel,
Christina Scheu,
Siyuan Zhang
Abstract:
Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diag…
▽ More
Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diagrams for defects. The discovery was enabled by triggering phase transformations of individual defects through local alloying, and sequentially imaging the structural and chemical changes using atomic-resolution scanning transmission electron microscopy. By observing atomic-scale phase transformations of a Mg grain boundary through Ga alloying, we exemplified the method to construct a grain boundary phase diagram using ab initio simulations and thermodynamic principles. The methodology enables a systematic development of defect phase diagrams to propel a new paradigm for materials design utilizing chemical complexity and phase transformations at defects.
△ Less
Submitted 31 August, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Atomic resolution observations of silver segregation in a [111] tilt grain boundary in copper
Authors:
Lena Langenohl,
Tobias Brink,
Gunther Richter,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
Alloying a material and hence segregating solutes to grain boundaries is one way to tailor a material to the demands of its application. Direct observation of solute segregation is necessary to understand how the interfacial properties are altered. In this study, we investigate the atomic structure of a high angle grain boundary both in pure copper and upon silver segregation by aberration-correct…
▽ More
Alloying a material and hence segregating solutes to grain boundaries is one way to tailor a material to the demands of its application. Direct observation of solute segregation is necessary to understand how the interfacial properties are altered. In this study, we investigate the atomic structure of a high angle grain boundary both in pure copper and upon silver segregation by aberration-corrected scanning transmission electron microscopy and spectroscopy. We further correlate the experiments to atomistic simulations to quantify the local solute excess and its impact on grain boundary properties. We observe that the grain boundary structure remains intact upon silver segregation and up to five different positions within a structural unit serve as segregation sites. By combining the atomic resolution observation with atomistic modelling, we are able to quantify the local silver concentration and elucidate the underlying segregation mechanism.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron
Authors:
Ali Ahmadian,
Daniel Scheiber,
Xuyang Zhou,
Baptiste Gault,
Reza Darvishi Kamachali,
Werner Ecker,
Lorenz Romaner,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
The embrittlement of metallic alloys by liquid metals leads to catastrophic material failure and severely impacts their structural integrity. The weakening of grain boundaries by the ingress of liquid metal and preceding segregation in the solid are thought to promote early fracture. However, the potential of balancing between the segregation of cohesion-enhancing interstitial solutes and embrittl…
▽ More
The embrittlement of metallic alloys by liquid metals leads to catastrophic material failure and severely impacts their structural integrity. The weakening of grain boundaries by the ingress of liquid metal and preceding segregation in the solid are thought to promote early fracture. However, the potential of balancing between the segregation of cohesion-enhancing interstitial solutes and embrittling elements inducing grain boundary decohesion is not understood. Here, we unveil the mechanisms of how boron segregation mitigates the detrimental effects of the prime embrittler, zinc, in a $Σ5\,[0\,0\,1]$ tilt grain boundary in $α-$Fe ($4~at.\%$ Al). Zinc forms nanoscale segregation patterns inducing structurally and compositionally complex grain boundary states. Ab-initio simulations reveal that boron hinders zinc segregation and compensates for the zinc induced loss in grain boundary cohesion. Our work sheds new light on how interstitial solutes intimately modify grain boundaries, thereby opening pathways to use them as dopants for preventing disastrous material failure.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Universality of grain boundary phases in fcc metals: Case study on high-angle [111] symmetric tilt grain boundaries
Authors:
Tobias Brink,
Lena Langenohl,
Hanna Bishara,
Gerhard Dehm
Abstract:
Grain boundaries often exhibit ordered atomic structures. Increasing amounts of evidence have been provided by transmission electron microscopy and atomistic computer simulations that different stable and metastable grain boundary structures can occur. Meanwhile, theories to treat them thermodynamically as grain boundary phases have been developed. Whereas atomic structures were identified at part…
▽ More
Grain boundaries often exhibit ordered atomic structures. Increasing amounts of evidence have been provided by transmission electron microscopy and atomistic computer simulations that different stable and metastable grain boundary structures can occur. Meanwhile, theories to treat them thermodynamically as grain boundary phases have been developed. Whereas atomic structures were identified at particular grain boundaries for particular materials, it remains an open question if these structures and their thermodynamic excess properties are material specific or generalizable to, e.g., all fcc metals. In order to elucidate that question, we use atomistic simulations with classical interatomic potentials to investigate a range of high-angle [111] symmetric tilt grain boundaries in Ni, Cu, Pd, Ag, Au, Al, and Pb. We could indeed find two families of grain boundary phases in all of the investigated grain boundaries, which cover most of the standard fcc materials. Where possible, we compared the atomic structures to atomic-resolution electron microscopy images and found that the structures match. This poses the question if the grain boundary phases are simply the result of sphere-packing geometry or if material-specific bonding physics play a role. We tested this using simple model pair potentials and found that medium-ranged interactions are required to reproduce the atomic structures, while the more realistic material models mostly affect the grain boundary (free) energy. In addition to the structural investigation, we also report the thermodynamic excess properties of the grain boundaries, explore how they influence the thermodynamic stability of the grain boundary phases, and detail the commonalities and differences between the materials.
△ Less
Submitted 13 February, 2023; v1 submitted 25 November, 2022;
originally announced November 2022.
-
Atomic motifs govern the decoration of grain boundaries by interstitial solutes
Authors:
Xuyang Zhou,
Ali Ahmadian,
Baptiste Gault,
Colin Ophus,
Christian H. Liebscher,
Gerhard Dehm,
Dierk Raabe
Abstract:
Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyz…
▽ More
Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyze 2D defects between two neighboring crystals across five hierarchy levels and investigate their crystallographic, compositional, and electronic features. The levels are (a) the macroscale interface alignment and grain misorientation (held constant here); (b) the systematic mesoscopic change in the inclination of the grain boundary plane for the same orientation difference; (c) the facets, atomic motifs (structural units), and internal nanoscopic defects within the boundary plane; (d) the grain boundary chemistry; and (e) the electronic structure of the atomic motifs. As a model material, we use Fe alloyed with B and C, exploiting the strong interdependence of interface structure and chemistry in this system. This model system is the basis of the 1.9 billion tons of steel produced annually and has an eminent role as a catalyst. Surprisingly, we find that even a change in the inclination of the GB plane with identical misorientation impacts GB composition and atomic arrangement. Thus, it is the smallest structural hierarchical level, the atomic motifs, which control the most important chemical properties of the grain boundaries. This finding not only closes a missing link between the structure and chemical composition of such defects but also enables the targeted design and passivation of the chemical state of grain boundaries to free them from their role as entry gates for corrosion, hydrogen embrittlement, or mechanical failure.
△ Less
Submitted 21 November, 2022; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices
Authors:
Sung-Gyu Kang,
Ramil Gainov,
Daniel Heußen,
Sören Bieler,
Zhongji Sun,
Kerstin Weinberg,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
Lattice structures composed of periodic solid frames and pores can be utilized in energy absorption applications due to their high specific strength and large deformation. However, these structures typically suffer from post-yield softenings originating from the limited plasticity of available material choices. This study aims to resolve such an issue by fabricating lattice structures made of duct…
▽ More
Lattice structures composed of periodic solid frames and pores can be utilized in energy absorption applications due to their high specific strength and large deformation. However, these structures typically suffer from post-yield softenings originating from the limited plasticity of available material choices. This study aims to resolve such an issue by fabricating lattice structures made of ductile pure copper (Cu). For the first time, Cu lattice structures are fabricated through laser-powder bed fusion (L-PBF) with green laser (λ = 515 nm). Structural and microstructural analysis confirm that the lattice structures consist of well-defined unit cells and show dense microstructure. The deformation behavior is investigated under a wide range of strain rates from ~0.001 /s to ~1000 /s. The stress-strain curves exhibit a smooth and continuous deformation without any post-yield softening, which can be attributed to the intrinsic mechanical properties of Cu. Correlated with post-mortem microscopy examination, the rate-dependent deformation behavior of pure Cu lattice structures is investigated and rationalized. The current work suggests that the complex Cu architectures can be fabricated by L-PBF with green laser and the lattice structures made of ductile metal are suitable for dynamic loading applications.
△ Less
Submitted 24 October, 2022;
originally announced October 2022.
-
Chemical Partitioning at Crystalline Defects in PtAu as a Pathway to Stabilize Electrocatalysts
Authors:
Xuyang Zhou,
Olga Kasian,
Ting Luo,
Se-Ho Kim,
Chenyu Zhang,
Siyuan Zhang,
Subin Lee,
Gregory B. Thompson,
Gerhard Dehm,
Baptiste Gault,
Dierk Raabe
Abstract:
Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We s…
▽ More
Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We showcase the feasibility of this approach by stabilizing a model Pt catalyst with an addition of more noble Au (approximately 5 atomic percent). We characterized the defects' nanoscale structure and chemistry, and monitored the electrochemical dissolution of Pt and PtAu alloys by online inductively coupled plasma mass spectrometry. Once segregated to defects, Au atoms can stabilize and hence passivate the most vulnerable sites against electrochemical dissolution and improve the stability and longevity of the Pt electrocatalysts by more than an order of magnitude. This opens pathways to use solute segregation to defects for the development of more stable nanoscale electrocatalysts, a concept applicable for a wide range of catalytic systems.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Effect of Pore Formation on Redox-Driven Phase Transformation
Authors:
Xuyang Zhou,
Yang Bai,
Ayman A. El-Zoka,
Se-Ho Kim,
Yan Ma,
Christian H. Liebscher,
Baptiste Gault,
Jaber R. Mianroodi,
Gerhard Dehm,
Dierk Raabe
Abstract:
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system.…
▽ More
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking.
△ Less
Submitted 6 March, 2023; v1 submitted 19 September, 2022;
originally announced September 2022.
-
Preferred corrosion pathways for oxygen in Al2Ca-twin boundaries and dislocations
Authors:
Nicolas J. Peter,
Daniela Zander,
Xumeng Cao,
Chunhua Tian,
Siyuan Zhang,
Kui Du,
Christina Scheu,
Gerhard Dehm
Abstract:
With an ongoing discussion on the oxygen diffusion along crystal defects remaining, it is difficult to study this phenomenon in Al containing intermetallic materials due to its rapid and passivating oxide formation. We report here the observation of enhanced oxygen diffusion along crystal defects, i.e. dislocations and twin boundaries, in the C15 Al 2 Ca Laves phase and how the presence of oxygen…
▽ More
With an ongoing discussion on the oxygen diffusion along crystal defects remaining, it is difficult to study this phenomenon in Al containing intermetallic materials due to its rapid and passivating oxide formation. We report here the observation of enhanced oxygen diffusion along crystal defects, i.e. dislocations and twin boundaries, in the C15 Al 2 Ca Laves phase and how the presence of oxygen induces structural changes at these defects. Three main phases were identified and characterized structurally by aberration-corrected, atomic resolution scanning transmission electron microscopy, analytically by energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. Unlike the C15 bulk phase, the twin boundary and dislocation transformed into a few nanometer wide amorphous phase, which depletes in Al and Ca but is highly enriched in oxygen. The dislocation even shows coexistence of the amorphous phase with a simple Al-rich A1 fcc phase. This A1 phase only depletes in Ca, not in Al (Al remains at bulk concentration), and is also enriched in oxygen. The Al-rich A1 phase is coherent with the C15 matrix. Electron energy loss spectroscopy revealed the amorphous phase to be Al 2 O 3 . We thereby show as one of the first studies that oxygen diffusion along crystal defects, especially also at the twin boundary can induce the formation of an amorphous oxide along themselves. The identification of oxygen-induced transformation at strained defects has to be considered when the material is exposed to air during plastic deformation at elevated temperatures.
△ Less
Submitted 9 August, 2022; v1 submitted 1 August, 2022;
originally announced August 2022.
-
Free, flexible and fast: orientation map** using the multi-core and GPU-accelerated template matching capabilities in the python-based open source 4D-STEM analysis toolbox Pyxem
Authors:
Niels Cautaerts,
Phillip Crout,
Håkon Wiik Ånes,
Eric Prestat,
Jiwon Jeong,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
This work presents the new template matching capabilities implemented in Pyxem, an open source Python library for analyzing four-dimensional scanning transmission electron microscopy (4D-STEM) data. Template matching is a brute force approach for deriving local crystal orientations. It works by comparing a library of simulated diffraction patterns to experimental patterns collected with nano-beam…
▽ More
This work presents the new template matching capabilities implemented in Pyxem, an open source Python library for analyzing four-dimensional scanning transmission electron microscopy (4D-STEM) data. Template matching is a brute force approach for deriving local crystal orientations. It works by comparing a library of simulated diffraction patterns to experimental patterns collected with nano-beam and precession electron diffraction (NBED and PED). This is a computationally demanding task, therefore the implementation combines efficiency and scalability by utilizing multiple CPU cores or a graphical processing unit (GPU). The code is built on top of the scientific python ecosystem, and is designed to support custom and reproducible workflows that combine the image processing, template library generation, indexation and visualisation all in one environment. The tools are agnostic to file size and format, which is significant in light of the increased adoption of pixelated detectors from different manufacturers. This paper details the implementation, validation, and benchmarking results of the method. The method is illustrated by calculating orientation maps of nanocrystalline materials and precipitates embedded in a crystalline matrix. The combination of speed and flexibility opens the door for automated parameter studies and real-time on-line orientation map** inside the TEM.
△ Less
Submitted 14 November, 2021;
originally announced November 2021.
-
Microstructure, grain boundary evolution and anisotropic Fe segregation in (0001) textured Ti thin films
Authors:
Vivek Devulapalli,
Marcus Hans,
Prithiv T. Sukumar,
Jochen M. Schneider,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
The structure and chemistry of grain boundaries (GBs) are crucial in determining polycrystalline materials' properties. Faceting and solute segregation to minimize the GB energy is a commonly observed phenomenon. In this paper, a deposition process to obtain pure tilt GBs in titanium (Ti) thin films is presented. By increasing the power density, a transition from polycrystalline film growth to a m…
▽ More
The structure and chemistry of grain boundaries (GBs) are crucial in determining polycrystalline materials' properties. Faceting and solute segregation to minimize the GB energy is a commonly observed phenomenon. In this paper, a deposition process to obtain pure tilt GBs in titanium (Ti) thin films is presented. By increasing the power density, a transition from polycrystalline film growth to a maze bicrystalline Ti film on SrTiO$_3$ (001) substrate is triggered. All the GBs in the bicrystalline thin film are characterized to be $Σ$13 [0001] coincident site lattice (CSL) boundaries. The GB planes are seen to distinctly facet into symmetric {$\bar{7}520$} and asymmetric {$10\bar{1}0$} // {$11\bar{2}0$} segments of 20-50~nm length. Additionally, EDS reveals preferential segregation of iron (Fe) in every alternate symmetric {$\bar{7}520$} segment. Both the faceting and the segregation are explained by a difference in the CSL density between the facet planes. Furthermore, in the GB plane containing Fe segregation, atom probe tomography is used to experimentally determine the GB excess solute to be 1.25~atoms/nm$^{2}$. In summary, the study reveals for the first time a methodology to obtain bicrystalline Ti thin films with strong faceting and anisotropy in iron (Fe) segregation behaviour within the same family of planes.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Dual phase patterning during a congruent grain boundary phase transition in elemental copper
Authors:
Lena Frommeyer,
Tobias Brink,
Rodrigo Freitas,
Timofey Frolov,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale patterning of a grain boundary by two alternating grain boundary phases with distinct atomic structures in elemental copper by atomic resolution imaging. The same…
▽ More
The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale patterning of a grain boundary by two alternating grain boundary phases with distinct atomic structures in elemental copper by atomic resolution imaging. The same grain boundary phases are found by grain boundary structure search indicating a first-order transformation. Finite temperature atomistic simulations reveal a congruent, diffusionless transition between these phases under ambient pressure. The patterning of the grain boundary at room temperature is dominated by the grain boundary phase junctions separating the phase segments. Our analysis suggests that the reduced mobility of the phase junctions at low temperatures kinetically limits the transformation, but repulsive elastic interactions between them and disconnections could additionally stabilize the pattern formation.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Understanding grain boundary electrical resistivity in Cu: the effect of boundary structure
Authors:
Hanna Bishara,
Subin Lee,
Tobias Brink,
Matteo Ghidelli,
Gerhard Dehm
Abstract:
Grain boundaries (GBs) in metals usually increase electrical resistivity due to their distinct atomic arrangement compared to the grain interior. While the GB structure has a crucial influence on the electrical properties, its relationship with resistivity is poorly understood. Here, we perform a systematic study on the resistivity and structure relationship in Cu tilt GBs, employing high resoluti…
▽ More
Grain boundaries (GBs) in metals usually increase electrical resistivity due to their distinct atomic arrangement compared to the grain interior. While the GB structure has a crucial influence on the electrical properties, its relationship with resistivity is poorly understood. Here, we perform a systematic study on the resistivity and structure relationship in Cu tilt GBs, employing high resolution in-situ electrical measurements coupled with atomic structure analysis of the GBs. Excess volume and energies of selected GBs are calculated using molecular dynamics simulations. We find a consistent relation between the coincidence site lattice (CSL) type of the GB and its resistivity. The most resistive GBs are high range of low-angle GBs (misorientation 14 to 18 degrees) with twice the resistivity of high angle tilt GBs, due to the high dislocation density and corresponding strain fields. Regarding the atomistic structure, GB resistivity approximately correlates with the GB excess volume. Moreover, we show that GB curvature increases resistivity by about 80%, while phase variations and defects within the same CSL type do not considerably change it.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance
Authors:
Ting Luo,
Federico Serrano-Sánchez,
Hanna Bishara,
Siyuan Zhang,
Ruben Bueno Villoro,
Jimmy Jiahong Kuo,
Claudia Felser,
Christina Scheu,
G. Jeffrey Snyder,
James P. Best,
Gerhard Dehm,
Yuan Yu,
Dierk Raabe,
Chenguang Fu,
Baptiste Gault
Abstract:
Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trap** of electrons due to space-charge effects. Yet, the current lack of careful investigations on g…
▽ More
Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trap** of electrons due to space-charge effects. Yet, the current lack of careful investigations on grain boundary-associated features hinders further optimization of properties. Here, we study n-type NbCo1-xPtxSn half-Heusler alloys, which were synthesized by ball milling and spark plasma sintering (SPS). Post-SPS annealing was performed on one sample, leading to improved low-temperature electrical conductivity. The microstructure of both samples was examined by electron microscopy and atom probe tomography. The grain size increases from ~230 nm to ~2.38 μm upon annealing. Pt is found within grains and at grain boundaries, where it locally reduces the resistivity, as assessed by in situ four-point-probe electrical conductivity measurement. Our work showcases the correlation between microstructure and electrical conductivity, providing opportunities for future microstructural optimization by tuning the chemical composition at grain boundaries.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Atomistic deformation behavior of single and twin crystalline Cu nanopillars with preexisting dislocations
Authors:
Won-Seok Ko,
Alexander Stukowski,
Raheleh Hadian,
Ali Nematollahi,
Jong Bae Jeon,
Won Seok Choi,
Gerhard Dehm,
Jörg Neugebauer,
Christoph Kirchlechner,
Blazej Grabowski
Abstract:
Molecular dynamics simulations are performed to investigate the role of a coherent Σ3 (111) twin boundary on the plastic deformation behavior of Cu nanopillars. Our work reveals that the mechanical response of pillars with and without the twin boundary is decisively driven by the characteristics of initial dislocation sources. In the condition of comparably large pillar size and abundant initial m…
▽ More
Molecular dynamics simulations are performed to investigate the role of a coherent Σ3 (111) twin boundary on the plastic deformation behavior of Cu nanopillars. Our work reveals that the mechanical response of pillars with and without the twin boundary is decisively driven by the characteristics of initial dislocation sources. In the condition of comparably large pillar size and abundant initial mobile dislocations, overall yield and flow stresses are controlled by the longest, available mobile dislocation. An inverse correlation of the yield and flow stresses with the length of the longest dislocation is established, and its extrapolation agrees well with experimental yield stress data. The experimentally reported subtle differences in yield and flow stresses between pillars with and without the twin boundary are thus likely related to the maximum lengths of the mobile dislocations. In the condition of comparably small pillar size, for which a reduction of mobile dislocations during heat treatment and mechanical loading occurs, the mechanical response of pillars with and without the twin boundary can be clearly distinguished. Dislocation starvation during deformation is more clearly present in pillars without the twin boundary than in pillars with the twin boundary because the twin boundary acts as a pinning surface for the dislocation network.
△ Less
Submitted 8 April, 2021; v1 submitted 8 April, 2021;
originally announced April 2021.
-
Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films
Authors:
Subin Lee,
Dominique Chatain,
Christian H. Liebscher,
Gerhard Dehm
Abstract:
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film wi…
▽ More
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
Investigation of the orientation relationship between nano-sized G-phase precipitates and austenite with scanning nano-beam electron diffraction using a pixelated detector
Authors:
Niels Cautaerts,
Edgar F. Rauch,
Jiwon Jeong,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (M$_6$Ni$_{16}$Si$_{7}$) precipitates in an austenite matrix. Using this detector, the faint diffraction spots originating from the small G-phase particles could be resolved simultaneously as the intense matrix reflections. The d…
▽ More
Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (M$_6$Ni$_{16}$Si$_{7}$) precipitates in an austenite matrix. Using this detector, the faint diffraction spots originating from the small G-phase particles could be resolved simultaneously as the intense matrix reflections. The diffraction patterns were analyzed using a two-stage template matching scheme, whereby the matrix is indexed first and the precipitates are indexed second after subtraction of the matrix contribution to the diffraction patterns. The results show that G-phase forms with orientation relationships relative to austenite that are characteristic of face-centered cubic (FCC) to body-centered cubic (BCC) transformations. This work demonstrates that nano-beam electron diffraction with a pixelated detector is a promising technique to investigate orientation relationships of nano-sized precipitates with complex crystal structures in other material systems with relative ease.
△ Less
Submitted 16 April, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Automated crystal orientation map** by precession electron diffraction assisted four-dimensional scanning transmission electron microscopy (4D-STEM) using a scintillator based CMOS detector
Authors:
Jiwon Jeong,
Niels Cautaerts,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
The recent development of electron sensitive and pixelated detectors has attracted the use of four-dimensional scanning transmission electron microscopy (4D-STEM). Here, we present a precession electron diffraction assisted 4D-STEM technique for automated orientation map** using diffraction spot patterns directly captured by an in-column scintillator based complementary metal-oxide-semiconductor…
▽ More
The recent development of electron sensitive and pixelated detectors has attracted the use of four-dimensional scanning transmission electron microscopy (4D-STEM). Here, we present a precession electron diffraction assisted 4D-STEM technique for automated orientation map** using diffraction spot patterns directly captured by an in-column scintillator based complementary metal-oxide-semiconductor (CMOS) detector. We compare the results to a conventional approach, which utilizes a fluorescent screen filmed by an external CCD camera. The high dynamic range and signal-to-noise characteristics of the detector largely improve the image quality of the diffraction patterns, especially the visibility of diffraction spots at high scattering angles. In the orientation maps reconstructed via the template matching process, the CMOS data yields a significant reduction of false indexing and higher reliability compared to the conventional approach. The angular resolution of misorientation measurement could also be improved by masking reflections close to the direct beam. This is because the orientation sensitive, weak and small diffraction spots at high scattering angle are more significant. The results show that fine details such as nanograins, nanotwins and sub-grain boundaries can be resolved with a sub-degree angular resolution which is comparable to orientation map** using Kikuchi diffraction patterns.
△ Less
Submitted 5 March, 2021; v1 submitted 18 February, 2021;
originally announced February 2021.
-
Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc?
Authors:
Maya Kini,
Subin Lee,
Alan Savan,
Benjamin Breitbach,
Younes Addab,
Wenjun Lu,
Matteo Ghidelli,
Alfred Ludwig,
Nathalie Bozzolo,
Christina Scheu,
Dominique Chatain,
Gerhard Dehm
Abstract:
The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex…
▽ More
The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex alloys, and their microstructure evolution upon annealing. The thin film processing route offers an excellent alternative to form nanocrystalline alloys. Due to the high nucleation rate and high density of defects in thin films synthesized by sputtering, the kinetics of microstructure evolution is often accelerated compared to those taking place in the bulk. Here, thin films are used to study the phase evolution in nanocrystalline CoCrFeNi deposited on Si/SiO 2 and c-sapphire substrates by magnetron cosputtering from elemental sources. The phases and microstructure of the films are discussed in comparison to the bulk alloy. The main conclusion is that second phases can form even at room temperature provided there are sufficient nucleation sites.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Aluminum depletion induced by complex co-segregation of carbon and boron in a Σ 5 [3 1 0] bcc-iron grain boundary
Authors:
Ali Ahmadian,
Daniel Scheiber,
Xuyang Zhou,
Baptiste Gault,
Christian H. Liebscher,
Lorenz Romaner,
Gerhard Dehm
Abstract:
The local variation of grain boundary atomic structure and chemistry caused by segregation of impurities influences the macroscopic properties of poylcrystalline materials. Here, the effect of co-segregation of carbon and boron on the depletion of aluminum at a $Σ5\,(3\,1\,0\,) [0\,0\,1]$ tilt grain boundary in a $α-$Fe-$4~at.~\%$Al bicrystal was studied by combining atomic resolution scanning tra…
▽ More
The local variation of grain boundary atomic structure and chemistry caused by segregation of impurities influences the macroscopic properties of poylcrystalline materials. Here, the effect of co-segregation of carbon and boron on the depletion of aluminum at a $Σ5\,(3\,1\,0\,) [0\,0\,1]$ tilt grain boundary in a $α-$Fe-$4~at.~\%$Al bicrystal was studied by combining atomic resolution scanning transmission electron microscopy, atom probe tomography and density functional theory calculations. The atomic grain boundary structural units mostly resemble kite-type motifs and the structure appears disrupted by atomic scale defects. Atom probe tomography reveals that carbon and boron impurities are co-segregating to the grain boundary reaching levels of >1.5 at.\%, whereas aluminum is locally depleted by approx. 2~at.\%. First-principles calculations indicate that carbon and boron exhibit the strongest segregation tendency and their repulsive interaction with aluminum promotes its depletion from the grain boundary. It is also predicted that substitutional segregation of boron atoms may contribute to local distortions of the kite-type structural units. These results suggest that the co-segregation and interaction of interstitial impurities with substitutional solutes strongly influences grain boundary composition and with this the properties of the interface.
△ Less
Submitted 1 January, 2021;
originally announced January 2021.
-
Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature
Authors:
Tangqing Cao,
Wenqi Guo,
Wang Lu,
Yunfei Xue,
Wenjun Lu,
**g Su,
Christian H. Liebscher,
Chang Liu,
Gerhard Dehm
Abstract:
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100°C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher te…
▽ More
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100°C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher temperatures and lower strain rates with the Zener-Holloman parameter, lnZ, in the range of 17.2-20.7. Such a softening behavior can be related to the interaction of dislocations with short-range clustering. However, at higher strain rates or lower temperatures (lnZ>25.0), kink bands were activated being responsible for the continuous strengthening of the alloy in competition with the softening mechanism. Systematic TEM investigations reveal that dislocation walls formed along {110} planes and dislocation loops were observed at a low strain of 6% at a high strain rate of 1 s-1 and 800°C. Kink band induced dynamic recrystallization is evident upon further straining. On the other hand, at low strain rate of 10-3 s-1 and 800°C, discontinuous recrystallization mechanisms become dominant with arrays of dislocations forming in front of the bulged boundaries of parent grains. These sub-grain boundaries eventually turn into high-angle grain boundaries. We also investigate the deformation mechanism of the alloy under extremely high strain rate (103 s-1) at room temperature. The specimen exhibits extensive kink bands with arrays of dislocation walls. As further strained, multiple slip systems can be activated and the interaction of dislocation walls plays a vital role in the strain hardening of the alloy.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
Faceting diagram for Ag segregation induced nanofaceting at an asymmetric Cu tilt grain boundary
Authors:
Nicolas J. Peter,
Maria J. Duarte,
Christoph Kirchlechner,
Christian H. Liebscher,
Gerhard Dehm
Abstract:
In this work, we experimentally establish the isothermal nanofacet evolution at an asymmetric tilt grain boundary in the Cu-Ag system using a diffusion couple approach. We investigate the nanofacet formation along the grain boundary in dependence of the Ag solute excess concentration. The initial grain boundary dissociates into asymmetric Ag-lean segments and Ag-rich symmetric (210) segments. Incr…
▽ More
In this work, we experimentally establish the isothermal nanofacet evolution at an asymmetric tilt grain boundary in the Cu-Ag system using a diffusion couple approach. We investigate the nanofacet formation along the grain boundary in dependence of the Ag solute excess concentration. The initial grain boundary dissociates into asymmetric Ag-lean segments and Ag-rich symmetric (210) segments. Increasing Ag excess leads to an increase in Ag-rich facet segment length, while the length of the asymmetric facets remains constant. From this, we construct a grain boundary nanofaceting diagram deduced from our experiments relating local atomic structure, overall inclination and Ag solute excess.
△ Less
Submitted 1 September, 2020;
originally announced September 2020.
-
The origin of jerky dislocation motion in high-entropy alloys
Authors:
Daniel Utt,
Subin Lee,
Yaolong Xing,
Hye** Jeong,
Alexander Stukowski,
Sang Ho Oh,
Gerhard Dehm,
Karsten Albe
Abstract:
Dislocations in single-phase concentrated random alloys, including high- entropy alloys (HEAs), repeatedly encounter pinning during glide, resulting in jerky dislocation motion. While solute-dislocation interaction is well understood in conventional alloys, the origin of individual pinning points in concentrated random alloys is a matter of debate. In this work, we investigate the origin of disloc…
▽ More
Dislocations in single-phase concentrated random alloys, including high- entropy alloys (HEAs), repeatedly encounter pinning during glide, resulting in jerky dislocation motion. While solute-dislocation interaction is well understood in conventional alloys, the origin of individual pinning points in concentrated random alloys is a matter of debate. In this work, we investigate the origin of dislocation pinning in the CoCrFeMnNi HEA. In- situ transmission electron microscopy studies reveal wavy dislocation lines and a jagged glide motion under external loading, even though no segregation or clustering is found around Shockley partial dislocations. Atomistic simulations reproduce the jerky dislocation motion and link the repeated pinning to local fluctuations in the Peierls friction. We demonstrate that the density of high local Peierls friction is proportional to the critical stress required for dislocation glide and the dislocation mobility.
△ Less
Submitted 23 August, 2022; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale
Authors:
Nicolas J. Peter,
Maria J. Duarte,
Christian H. Liebscher,
Vikas C. Srivastava,
Volker Uhlenwinkel,
Eric A. Jägle,
Gerhard Dehm
Abstract:
High entropy alloys are generally considered to be single phase material. This state is, however, typically a non-equilibrium state after fabrication at high cooling rates. Phase constitution after fabrication or heat treatment is mostly known for isothermal annealing only and for casts as well as rapidly quenched alloys. Knowledge on early phase separation stages of high entropy alloys and their…
▽ More
High entropy alloys are generally considered to be single phase material. This state is, however, typically a non-equilibrium state after fabrication at high cooling rates. Phase constitution after fabrication or heat treatment is mostly known for isothermal annealing only and for casts as well as rapidly quenched alloys. Knowledge on early phase separation stages of high entropy alloys and their mechanisms are missing so far. Here, we present results on phase separation at intermediate cooling rates, by characterization of gas atomized powder of the AlCoCr0.75Cu0.5FeNi alloy. Although investigation by X-ray diffraction and Electron Backscatter Diffraction indicates a single-phase nature of the powder particles, aberration-corrected scanning transmission electron microscopy and atom probe tomography reveal a nanoscale phase separation into Ni-Al-rich B2 and Fe-Cr-rich A2 regions as well as a high number density of 3.1x1024 Cu-rich clusters per m3 in the B2 matrix. The observed phase separation and cluster formation are linked to spinodal decomposition and nucleation processes, respectively. The study highlights that adequate characterization techniques need to be chosen when making statements about phase stability and structural evolution in compositionally complex alloys.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001)alpha-Al2O3
Authors:
Younes Addab,
Maya K. Kini,
Blandine Courtois,
Alan Savan,
Alfred Ludwig,
Nathalie Bozzolo,
Christina Scheu,
Gerhard Dehm,
Dominique Chatain
Abstract:
Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and 1423 K. The fcc-phase persists while the original <111> texture of 30-100 nm wide columnar grains evolves into ~10 or ~1000 micron wide grains. Only the grains ha…
▽ More
Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and 1423 K. The fcc-phase persists while the original <111> texture of 30-100 nm wide columnar grains evolves into ~10 or ~1000 micron wide grains. Only the grains having specific orientation relationships to the sapphire grow; as in the case of pure fcc metal (M) films 4 orientation relationships (OR) are found: OR1 (M(111)[1-10]//alpha-Al2O3 (0001)[1-100]) and OR2 (M(111)[1-10]//alpha-Al2O3 (0001)[11-20]) and their twin-related variants (OR1t and OR2t). Below 1000 K, the film microstructure stabilizes into 10 micron wide OR1 and OR1t twin grains independent of film thickness. Above 1000 K, the OR2 and OR2t grains expand to sizes exceeding more than a 1000 times the film thickness. Upon annealing, the films either retain their integrity or break-up depending on the competing kinetics of grain growth and grain boundary grooving. Triple junctions of the grain boundaries, the major actors in film stability, were tracked. Thinner films and higher temperatures favor film break-up by dewetting from the holes grooved at the triple junctions down to the substrate. The grain boundaries of the OR2 and OR2t grains migrate fast enough to overcome the nucleation of holes from which break-up could initiate. The growth of the OR2 and OR2t grains in this complex alloy is faster than in pure fcc metals at equivalent homologous annealing temperatures.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process
Authors:
Hyo Yun Jung,
Nicolas J. Peter,
Eric Gärtner,
Gerhard Dehm,
Volker Uhlenwinkel,
Eric A. Jägle
Abstract:
We report the synthesis of a bulk nanostructured alloy using the laser-powder bed fusion process. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consisted of Al & Ni-rich ordered (B2) and Cr & Fe-rich disordered (A2) BCC phases. The two phases form an interconnected phase-ne…
▽ More
We report the synthesis of a bulk nanostructured alloy using the laser-powder bed fusion process. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consisted of Al & Ni-rich ordered (B2) and Cr & Fe-rich disordered (A2) BCC phases. The two phases form an interconnected phase-network with coherent interface boundaries. Atom-probe-tomography and aberration-corrected scanning transmission electron microscopy analysis of the spatial distribution of the modulated structure suggests the occurrence of nano-scale spinodal decomposition. These results introduce a direct synthesis of bulk nanostructured alloys with promising geometric flexibility.
△ Less
Submitted 5 April, 2020;
originally announced April 2020.
-
Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride?
Authors:
Yanhong Chang,
Siyuan Zhang,
Christian H. Liebscher,
David Dye,
Dirk Ponge,
Christina Scheu,
Gerhard Dehm,
Dierk Raabe,
Baptiste Gault,
Wenjun Lu
Abstract:
A face-centered cubic (FCC) phase in electro-polished specimens for transmission electron microscopy of commercially pure titanium has sometimes been reported. Here, a combination of atom-probe tomography, scanning transmission electron microscopy and low-loss electron energy loss spectroscopy is employed to study both the crystal structural and chemical composition of this FCC phase. Our results…
▽ More
A face-centered cubic (FCC) phase in electro-polished specimens for transmission electron microscopy of commercially pure titanium has sometimes been reported. Here, a combination of atom-probe tomography, scanning transmission electron microscopy and low-loss electron energy loss spectroscopy is employed to study both the crystal structural and chemical composition of this FCC phase. Our results prove that the FCC phase is actually a TiHx (x>1) hydride, and not a new allotrope of Ti, in agreement with previous reports. The formation of the hydride is discussed.
△ Less
Submitted 23 October, 2019; v1 submitted 2 July, 2019;
originally announced July 2019.
-
Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Authors:
Oleksandr Glushko,
Gerhard Dehm
Abstract:
Despite the large number of experiments demonstrating that grains in a metallic material can grow at room temperature due to applied mechanical load, the mechanisms and the driving forces responsible for mechanically induced grain coarsening are still not understood. Here we present a systematic study of room temperature grain coarsening induced by cyclic strain in thin polymer-supported gold film…
▽ More
Despite the large number of experiments demonstrating that grains in a metallic material can grow at room temperature due to applied mechanical load, the mechanisms and the driving forces responsible for mechanically induced grain coarsening are still not understood. Here we present a systematic study of room temperature grain coarsening induced by cyclic strain in thin polymer-supported gold films. By means of detailed electron backscatter diffraction analysis we were able to capture both the growth of individual grains and the evolution of the whole microstructure on the basis of statistical data over thousands of grains. The experimental data are reported for three film thicknesses with slightly different microstructures and three different amplitudes of cyclic mechanical loading. Although different kinds of grain size evolution with increasing cycle number are observed depending on film thickness and strain amplitude, a single model based on a thermodynamic driving force is shown to be capable to explain initiation and stagnation of grain coarsening in all cases. The main implication of the model is that the grains having lower individual yield stress are coarsening preferentially. Besides, it is demonstrated that the existence of local shear stresses imposed on a grain boundary is not a necessary requirement for room-temperature grain coarsening.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
On the segregation of Re at dislocations in the γ' phase of Ni-based single crystal superalloys
Authors:
Xiaoxiang Wu,
Surendra Kumar Makineni,
Paraskevas Kontis,
Gerhard Dehm,
Dierk Raabe,
Baptiste Gault,
Gunther Eggeler
Abstract:
We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of γ' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at 750°C under an applied stress of 800 MPa. The observed segregation effects can be rationalized through bridging the solute partitioning behavior across the γ/γ' interface and…
▽ More
We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of γ' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at 750°C under an applied stress of 800 MPa. The observed segregation effects can be rationalized through bridging the solute partitioning behavior across the γ/γ' interface and the pipe diffusion mechanism along the core of the dislocation line. This understanding can provide new insights enabling improved alloy design.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.