-
Alfvén waves at low Magnetic Reynolds number
Authors:
Samy Lalloz,
Laurent Davoust,
François Debray,
Alban Pothérat
Abstract:
This paper seeks whether Alfvén waves (AW) can be produced in laboratory-scale liquid metal experiments, \emph{i.e.} at low-magnetic Reynolds Number ($R\!m$). AW are incompressible waves propagating along magnetic fields typically found geo and astrophysical systems. Until now, only faint linear waves have been experimentally produced in liquid metals because of the large magnetic dissipation they…
▽ More
This paper seeks whether Alfvén waves (AW) can be produced in laboratory-scale liquid metal experiments, \emph{i.e.} at low-magnetic Reynolds Number ($R\!m$). AW are incompressible waves propagating along magnetic fields typically found geo and astrophysical systems. Until now, only faint linear waves have been experimentally produced in liquid metals because of the large magnetic dissipation they undergo when $R\!m\ll1$. Yet, controlling laboratory AW could emulate such far remote processes as anomalous heating in the solar corona, oscillations of the Earth inner core or turbulence in the solar wind. To answer this question, we force AW with an AC electric current in a liquid metal channel in a transverse magnetic field. We derive a wave-bearing extension of the usual low$-R\!m$ MHD approximation to identify two linear regimes: The purely diffusive regime exists when $N_ω$, the ratio of the oscillation period to the timescale of diffusive two-dimensionalisation by the Lorentz force, is small. The propagative regime is governed by the ratio of the forcing period to the AW propagation timescale which, we call the Jameson number $J\!a$ after Jameson (1964), JFM. In this regime, AW are dissipative and dispersive as they propagate more slowly where velocity gradients are higher. Both regimes are recovered in the FLOWCUBE experiment, in excellent agreement with the model up to $J\!a \lesssim 0.85$ but near the $J\!a=1$ resonance, high amplitude waves become clearly nonlinear. Hence, in electrically driving AW, we were able to produce some of the propagative, diffusive and nonlinear processes of astro and geophysical AW.
△ Less
Submitted 9 May, 2024; v1 submitted 7 May, 2024;
originally announced May 2024.
-
Magnetic Taylor-Proudman constraint explains the flow into Tangent Cylinders
Authors:
Alban Pothérat,
Kélig Aujogue,
François Debray
Abstract:
Our understanding of planetary dynamos and liquid cores relies on the existence of a Tangent Cylinder (TC). This imaginary surface that physically separates polar and equatorial regions stems from Taylor-Proudman's Constraint (TPC) due to planetary rotation only. Here we establish mathematically and verify experimentally that a magnetic field aligned with the rotation incurs a flow \emph{into} the…
▽ More
Our understanding of planetary dynamos and liquid cores relies on the existence of a Tangent Cylinder (TC). This imaginary surface that physically separates polar and equatorial regions stems from Taylor-Proudman's Constraint (TPC) due to planetary rotation only. Here we establish mathematically and verify experimentally that a magnetic field aligned with the rotation incurs a flow \emph{into} the TC, linked to the flow along it by a \emph{magnetic} TPC. This constraint sheds new light on flows in planetary cores and flows subject to both magnetic fields and rotation in general.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider
Authors:
L. Bottura,
D. Aguglia,
B. Auchmann,
T. Arndt,
J. Beard,
A. Bersani,
F. Boattini,
M. Breschi,
B. Caiffi,
X. Chaud,
M. Dam,
F. Debray,
H. De Gersem,
E. De Matteis,
A. Dudarev,
S. Farinon,
A. Kario,
R. Losito,
S. Mariotto,
M. Mentink,
R. Musenich,
T. Ogitsu,
M. Prioli,
L. Quettier,
L. Rossi
, et al. (8 additional authors not shown)
Abstract:
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish…
▽ More
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions.
△ Less
Submitted 29 March, 2022; v1 submitted 26 March, 2022;
originally announced March 2022.
-
Inverse and direct energy cascades in 3D MHD turbulence at low-Rm
Authors:
N. T. Baker,
A. Pothérat,
L. Davoust,
F. Debray
Abstract:
This experimental study analyzes the relationship between the dimensionality of turbulence and the upscale or downscale nature of its energy transfers. We do so by forcing low-$Rm$ magnetohydrodynamic (MHD) turbulence in a confined channel, while precisely controlling its dimensionality by means of an externally applied magnetic field. We first identify a specific lengthscale $\hat{l}_\perp^c$ tha…
▽ More
This experimental study analyzes the relationship between the dimensionality of turbulence and the upscale or downscale nature of its energy transfers. We do so by forcing low-$Rm$ magnetohydrodynamic (MHD) turbulence in a confined channel, while precisely controlling its dimensionality by means of an externally applied magnetic field. We first identify a specific lengthscale $\hat{l}_\perp^c$ that separates smaller three-dimensional structures from larger quasi-two-dimensional ones. We then show that an inverse energy cascade of horizontal kinetic energy along horizontal scales is always observable at large scales, but that it extends well into the region of 3D structures. At the same time, a direct energy cascade confined to the smallest and strongly 3D scales is observed. These dynamics therefore appear not to be simply determined by the dimensionality of individual scales, nor by the forcing scale, unlike in other studies. In fact, our findings suggest that the relationship between kinematics and dynamics is not universal and may strongly depend on the forcing and dissipating mechanisms at play.
△ Less
Submitted 8 June, 2018; v1 submitted 11 August, 2017;
originally announced August 2017.
-
Experimental study of the convection in a rotating tangent cylinder
Authors:
Kélig Aujogue,
Alban Pothérat,
Binod Sreenivasan,
François Debray
Abstract:
This paper experimentally investigates the convection in a fast rotating Tangent Cylinder (TC), for Ekman numbers down to $E=3.36\times10^{-6}$, in a configuration relevant to the liquid core of the Earth. In the apparatus, the TC results from the Proudman-Taylor constraint incurred by rotating a hemispherical fluid vessel heated in its centre by a protruding heating element of cylindrical shape.…
▽ More
This paper experimentally investigates the convection in a fast rotating Tangent Cylinder (TC), for Ekman numbers down to $E=3.36\times10^{-6}$, in a configuration relevant to the liquid core of the Earth. In the apparatus, the TC results from the Proudman-Taylor constraint incurred by rotating a hemispherical fluid vessel heated in its centre by a protruding heating element of cylindrical shape. The resulting convection that develops above the heater, i.e within the TC, is shown to set in for critical Rayleigh numbers and wavenumbers respectively scaling as $Ra_c\sim E^{4/3}$ and $a_c\sim E^{1/3}$ with the Ekman number $E$. Though exhibiting the same exponents as for plane rotating convection, these laws are indicative of much larger convective plumes at onset. The structure and dynamics of these plumes are in fact closer to those found in solid rotating cylinders heated from below, suggesting that the confinement within the TC induced by the Taylor-Proudman constraint influences convection in a similar way as solid walls would do. There is further similarity in that the critical modes in the TC all exhibit a slow retrograde precession at onset. In supercritical regimes, the precession evolves into a thermal wind with a complex structure featuring retrograde rotation at high latitude and either prograde or retrograde rotation at low latitudes (close to the heater), depending on the criticality and the Ekman number. Nevertheless the intensity of the thermal wind measured by the Rossby number scales as $Ro\sim 0.85(Ra_q^*)^{0.41}$ with the Rayleigh number based on the heat flux $Ra_q^*$. This scaling suggests that the convection in the TC is driven by quasi-geostrophic dynamics, a finding supported by the scaling for the rotation-normalised Nusselt number $Nu^{*} \sim (Ra_{q}^{*})^{5/9}$.
△ Less
Submitted 27 April, 2018; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Controlling the dimensionality of low-Rm MHD turbulence experimentally
Authors:
Nathaniel T. Baker,
Alban Pothérat,
Laurent Davoust,
François Debray,
Rico Klein
Abstract:
This paper introduces an experimental apparatus, which drives turbulence electrically in a liquid metal pervaded by a high magnetic field. Unlike past magnetohydrodynamic (MHD) setups involving a shallow confinement, the experiment presented here drives turbulence whose dimensionality can be set anywhere between three-dimensional and quasi two-dimensional. In particular, we show that the dimension…
▽ More
This paper introduces an experimental apparatus, which drives turbulence electrically in a liquid metal pervaded by a high magnetic field. Unlike past magnetohydrodynamic (MHD) setups involving a shallow confinement, the experiment presented here drives turbulence whose dimensionality can be set anywhere between three-dimensional and quasi two-dimensional. In particular, we show that the dimensionality and componentality of the turbulence thus generated are in fact completely fixed by the single parameter lz(li)/h, which quantifies the competition between the solenoidal component of the Lorentz force and inertia acting on a turbulent structure of the size of the forcing scale li. This parameter is fully tunable thanks to the three operating settings at hand: the injection scale, the intensity of the electric forcing and the magnitude of the magnetic field. Thanks to the very high number of measuring probes and fast acquisition rate implemented in this experiment, it is possible to reliably measure the finest features of the inertial range on a scale-wise basis.
△ Less
Submitted 30 June, 2017; v1 submitted 1 March, 2017;
originally announced March 2017.
-
Little Earth Experiment: an instrument to model planetary cores
Authors:
Kelig Aujogue,
Alban Potherat,
Ian Bates,
François Debray,
Binod Sreenivasan
Abstract:
In this paper, we present a new experimental facility, Little Earth Experiment, designed to study the hydrodynamics of liquid planetary cores. The main novelty of this apparatus is that a transparent electrically conducting electrolyte is subject to extremely high magnetic fields (up to 10T) to produce electromagnetic effects comparable to those produced by moderate magnetic fields in planetary co…
▽ More
In this paper, we present a new experimental facility, Little Earth Experiment, designed to study the hydrodynamics of liquid planetary cores. The main novelty of this apparatus is that a transparent electrically conducting electrolyte is subject to extremely high magnetic fields (up to 10T) to produce electromagnetic effects comparable to those produced by moderate magnetic fields in planetary cores. This technique makes it possible to visualise for the first time the coupling between the principal forces in a convection-driven dynamo by means of Particle Image Velocimetry (PIV) in a geometry relevant to planets. We first present the technology that enables us to generate these forces and implement PIV in a high magnetic field environment. We then show that the magnetic field drastically changes the structure of convective plumes in a configuration relevant to the tangent cylinder region of the Earth's core.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
The EUROnu Project
Authors:
T. R. Edgecock,
O. Caretta,
T. Davenne,
C. Densham,
M. Fitton,
D. Kelliher,
P. Loveridge,
S. Machida,
C. Prior,
C. Rogers,
M. Rooney,
J. Thomason,
D. Wilcox,
E. Wildner,
I. Efthymiopoulos,
R. Garoby,
S. Gilardoni,
C. Hansen,
E. Benedetto,
E. Jensen,
A. Kosmicki,
M. Martini,
J. Osborne,
G. Prior,
T. Stora
, et al. (146 additional authors not shown)
Abstract:
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the…
▽ More
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.
△ Less
Submitted 17 May, 2013;
originally announced May 2013.
-
Large critical current density improvement in Bi-2212 wires through groove-rolling process
Authors:
Andrea Malagoli,
Cristina Bernini,
Valeria Braccini,
Gennaro Romano,
Marina Putti,
Xavier Chaud,
Francois Debray
Abstract:
Recently the interest about Bi-2212 round wire superconductor for high magnetic field use has been enhancing despite the fact that an increase of the critical current is still needed to boost its successful use in such applications. Recent studies have demonstrated that the main obstacle to current flow, especially in long wires, is the residual porosity inside these Powder-In-Tube processed condu…
▽ More
Recently the interest about Bi-2212 round wire superconductor for high magnetic field use has been enhancing despite the fact that an increase of the critical current is still needed to boost its successful use in such applications. Recent studies have demonstrated that the main obstacle to current flow, especially in long wires, is the residual porosity inside these Powder-In-Tube processed conductors which develops in bubbles-agglomeration when the Bi-2212 melts. Through this work we tried to overcome this issue acting on the wire densification by changing the deformation process. Here we show the effects of groove-rolling versus drawing process on the critical current density JC and on the microstructure. In particular, groove-rolled multifilamentary wires show a JC increased by a factor of about 3 with respect to drawn wires prepared with the same Bi-2212 powder and architecture. We think that this approach in the deformation process is able to produce the required improvements both because the superconducting properties are enhanced and because it makes the fabrication process faster and cheaper.
△ Less
Submitted 13 February, 2013;
originally announced February 2013.
-
Experimental evidence of Alfvén wave propagation in a Gallium alloy
Authors:
Thierry Alboussiere,
Philippe Cardin,
François Debray,
Patrick La Rizza,
Jean-Paul Masson,
Franck Plunian,
Adolfo Ribeiro,
Denys Schmitt
Abstract:
Experiments with a liquid metal alloy, galinstan, are reported and show clear evidence of Alfvén wave propagation as well as resonance of Alfvén modes. Galinstan is liquid at room temperature, and although its electrical conductivity is not as large as that of liquid sodium or NaK, it has still been possible to study Alfvén waves, thanks to the use of intense magnetic fi elds, up to 13 teslas. The…
▽ More
Experiments with a liquid metal alloy, galinstan, are reported and show clear evidence of Alfvén wave propagation as well as resonance of Alfvén modes. Galinstan is liquid at room temperature, and although its electrical conductivity is not as large as that of liquid sodium or NaK, it has still been possible to study Alfvén waves, thanks to the use of intense magnetic fi elds, up to 13 teslas. The maximal values of Lundquist number, around 60, are similar to that of the reference experimental study by Jameson [1]. The generation mechanism for Alfvén waves and their refl ection is studied carefully. Numerical simulations have been performed and have been able to reproduce the experimental results despite the fact that the simulated magnetic Prandtl number was much larger than that of galinstan. An originality of the present study is that a poloidal disturbance (magnetic and velocity fields) is generated, allowing us to track its propagation from outside the conducting domain, hence without interfering.
△ Less
Submitted 25 June, 2011; v1 submitted 23 June, 2011;
originally announced June 2011.
