Showing 1–50 of 64 results for author: De Angelis, F

SAPNet: a deep learning model for identification of single-molecule peptide post-translational modifications with surface enhanced Raman spectroscopy

Authors: Mulusew W. Yaltaye, Yingqi Zhao, Eva Bozo, Pei-Lin Xin, Vahid Farrah, Francesco De Angelis, Jian-An Huang

Abstract: Nanopore resistive pulse sensors are emerging technologies for single-molecule protein sequencing. But they can hardly detect small post-translational modifications (PTMs) such as hydroxylation in single-molecule level. While a combination of surface enhanced Raman spectroscopy (SERS) with plasmonic nanopores can detect the small PTMs, the blinking Raman peaks in the single-molecule SERS spectra l… ▽ More Nanopore resistive pulse sensors are emerging technologies for single-molecule protein sequencing. But they can hardly detect small post-translational modifications (PTMs) such as hydroxylation in single-molecule level. While a combination of surface enhanced Raman spectroscopy (SERS) with plasmonic nanopores can detect the small PTMs, the blinking Raman peaks in the single-molecule SERS spectra leads to a big challenge in data analysis and PTM identification. Herein, we developed and validated a one-dimensional convolutional neural network (1D-CNN) for amino acids and peptides identification from their PTMs including hydroxylation and phosphorylation by their single-molecule SERS spectra, named Single Amino acid and Peptide Network (SAPNet). Our work combines cutting-edge plasmonic nanopore technology for SERS signal acquisition and deep learning for fully automated extraction of information from the SERS signals. The SAPNet model achieved an overall accuracy of 99.66% for the identification of amino acids from their modification, and 98.38% for the identification of peptides from their PTM translation. We also evaluated the model with out-of-sample examples with good performance. Our work can be beneficial for early detection of diseases such as cancers and Alzheimer's disease. △ Less

Submitted 5 January, 2024; originally announced January 2024.

Comments: 20 pages, 5 figures, 2 tables

Gamma-Ray Burst observations by the high-energy charged particle detector on board the CSES-01 satellite between 2019 and 2021

Authors: Francesco Palma, Matteo Martucci, Coralie Neubüser, Alessandro Sotgiu, Francesco Maria Follega, Pietro Ubertini, Angela Bazzano, James Rodi, Roberto Ammendola, Davide Badoni, Simona Bartocci, Roberto Battiston, Stefania Beolè, Igor Bertello, William Jerome Burger, Donatella Campana, Antonio Cicone, Piero Cipollone, Silvia Coli, Livio Conti, Andrea Contin, Marco Cristoforetti, Giulia D'Angelo, Fabrizio De Angelis, Cinzia De Donato , et al. (46 additional authors not shown)

Abstract: In this paper we report the detection of five strong Gamma-Ray Bursts (GRBs) by the High-Energy Particle Detector (HEPD-01) mounted on board the China Seismo-Electromagnetic Satellite (CSES-01), operational since 2018 on a Sun-synchronous polar orbit at a $\sim$ 507 km altitude and 97$^\circ$ inclination. HEPD-01 was designed to detect high-energy electrons in the energy range 3 - 100 MeV, protons… ▽ More In this paper we report the detection of five strong Gamma-Ray Bursts (GRBs) by the High-Energy Particle Detector (HEPD-01) mounted on board the China Seismo-Electromagnetic Satellite (CSES-01), operational since 2018 on a Sun-synchronous polar orbit at a $\sim$ 507 km altitude and 97$^\circ$ inclination. HEPD-01 was designed to detect high-energy electrons in the energy range 3 - 100 MeV, protons in the range 30 - 300 MeV, and light nuclei in the range 30 - 300 MeV/n. Nonetheless, Monte Carlo simulations have shown HEPD-01 is sensitive to gamma-ray photons in the energy range 300 keV - 50 MeV, even if with a moderate effective area above $\sim$ 5 MeV. A dedicated time correlation analysis between GRBs reported in literature and signals from a set of HEPD-01 trigger configuration masks has confirmed the anticipated detector sensitivity to high-energy photons. A comparison between the simultaneous time profiles of HEPD-01 electron fluxes and photons from GRB190114C, GRB190305A, GRB190928A, GRB200826B and GRB211211A has shown a remarkable similarity, in spite of the different energy ranges. The high-energy response, with peak sensitivity at about 2 MeV, and moderate effective area of the detector in the actual flight configuration explain why these five GRBs, characterised by a fluence above $\sim$ 3 $\times$ 10$^{-5}$ erg cm$^{-2}$ in the energy interval 300 keV - 50 MeV, have been detected. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: Accepted for publication in The Astrophysical Journal (ApJ)

Bound states in the continuum and long-range coupling of polaritons in hexagonal boron nitride nanoresonators

Authors: Harsh Gupta, Giacomo Venturi, Tatiana Contino, Eli Janzen, James H. Edgar, Francesco de Angelis, Andrea Toma, Antonio Ambrosio, Michele Tamagnone

Abstract: Bound states in the continuum (BICs) garnered significant for their potential to create new types of nanophotonic devices. Most prior demonstrations were based on arrays of dielectric resonators, which cannot be miniaturized beyond the diffraction limit, reducing the applicability of BICs for advanced functions. Here, we demonstrate BICs and quasi-BICs based on high-quality factor phonon-polariton… ▽ More Bound states in the continuum (BICs) garnered significant for their potential to create new types of nanophotonic devices. Most prior demonstrations were based on arrays of dielectric resonators, which cannot be miniaturized beyond the diffraction limit, reducing the applicability of BICs for advanced functions. Here, we demonstrate BICs and quasi-BICs based on high-quality factor phonon-polariton resonances in isotopically pure h11BN and how these states can be supported by periodic arrays of nanoresonators with sizes much smaller than the wavelength. We theoretically illustrate how BICs emerge from the band structure of the arrays and verify both numerically and experimentally the presence of these states and enhanced quality factor. Furthermore, we identify and characterize simultaneously quasi-BICs and bright states. Our method can be generalized to create a large number of optical states and to tune their coupling with the environment, paving the way to miniaturized nanophotonic devices with more advanced functions. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: 13 pages, 5 figures, early version

Two-Dimensional Moiré Polaronic Electron Crystals

Authors: Eric A. Arsenault, Yiliu Li, Birui Yang, Xi Wang, Heonjoon Park, Edoardo Mosconi, Enrico Ronca, Takashi Taniguchi, Kenji Watanabe, Daniel Gamelin, Andrew Millis, Cory R. Dean, Filippo de Angelis, Xiaodong Xu, X. -Y. Zhu

Abstract: Two-dimensional moiré materials have emerged as the most versatile platforms for realizing quantum phases of electrons. Here, we explore the stability origins of correlated states in WSe2/WS2 moiré superlattices. We find that ultrafast electronic excitation leads to melting of the Mott states on time scales five times longer than predictions from the charge hop** integrals and the melting rates… ▽ More Two-dimensional moiré materials have emerged as the most versatile platforms for realizing quantum phases of electrons. Here, we explore the stability origins of correlated states in WSe2/WS2 moiré superlattices. We find that ultrafast electronic excitation leads to melting of the Mott states on time scales five times longer than predictions from the charge hop** integrals and the melting rates are thermally activated, with activation energies of 18 and 13 meV for the one- and two-hole Mott states, respectively, suggesting significant electron-phonon coupling. DFT calculation of the one-hole Mott state confirms polaron formation and yields a hole-polaron binding energy of 16 meV. These findings reveal a close interplay of electron-electron and electron-phonon interactions in stabilizing the polaronic Mott insulators at transition metal dichalcogenide moiré interfaces. △ Less

Submitted 2 March, 2024; v1 submitted 31 July, 2023; originally announced July 2023.

Comments: 14 pages, 4 figures, 11 SI figures

Nanofluidic trap** and enhanced Raman detection of single biomolecules in plasmonic bowl-shaped nanopore

Authors: Yingqi Zhao, Aliaksandr Hubarevich, Jian-An Huang, Francesco De Angelis

Abstract: Solid-state nanopores are emerging platforms for single-molecule protein sequencing due to their tolerance to hash physiology environment and compatibility with different electrical and optical detection methods. However, they suffer from poor molecular manipulations that were twisted with and thus limited by the detection methods. Here, we report a bowl-shaped plasmonic gold nanopore on silicon n… ▽ More Solid-state nanopores are emerging platforms for single-molecule protein sequencing due to their tolerance to hash physiology environment and compatibility with different electrical and optical detection methods. However, they suffer from poor molecular manipulations that were twisted with and thus limited by the detection methods. Here, we report a bowl-shaped plasmonic gold nanopore on silicon nitride with hydrogel to demonstrate near-field nanofluidic manipulation of DNA translocation for plasmon-enhanced Raman spectroscopic detection. The hydrogel linearized the DNA, and the linear DNA was trapped in the nanopore for tens of seconds due assumably to bipolar effect of the nanopore that generate electroosmotic sheath flow and bipolar surface charge distribution. Their combination led to a near-field confinement of the DNA in the nanopore hot spot to allow stable Raman detection. We envision that a combination of Raman spectroscopy with the bowl-shaped nanopores can succeed in single-molecule protein sequencing in a label-free way △ Less

Submitted 13 March, 2022; originally announced March 2022.

Journal ref: Nano Letters 2023, 23, 11, 4830-4836

Nonlinear Hall effect as a local probe of plasmonic magnetic hot spots

Authors: Karina A. Guerrero-Becerra, Andrea Tomadin, Andrea Toma, Remo Proietti Zaccaria, Francesco De Angelis, Marco Polini

Abstract: Recently developed plasmonic nanostructures are able to generate intense and localized magnetic hot spots in a large spectral range from the terahertz to the visible. However, a direct measurement of the magnetic field at the hot spot has not been performed yet, due to the absence of magnetic field detectors that work at those high frequencies and that fit the hot-spot area. We propose to place a… ▽ More Recently developed plasmonic nanostructures are able to generate intense and localized magnetic hot spots in a large spectral range from the terahertz to the visible. However, a direct measurement of the magnetic field at the hot spot has not been performed yet, due to the absence of magnetic field detectors that work at those high frequencies and that fit the hot-spot area. We propose to place a graphene ribbon in the hot spot of a plasmonic nanostructure driven by a laser beam, such that a current is generated due to both the magnetic field at the hot spot and the electric field of the laser. We demonstrate that a nonlinear Hall voltage, which can be measured by standard electrical means, builds up across the ribbon, making it possible to directly probe the magnetic field at the hot spot. △ Less

Submitted 7 June, 2021; originally announced June 2021.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 104, 075434 (2021)

X-ray study of krypton and xenon under pressure reveals the mechanism of martensitic transformations

Authors: Angelika D. Rosa, Agnes Dewaele, Gaston Garbarino, Volodymyr Svitlyk, Guillaume Morard, Francesco De Angelis, Marija Krstulovic, Richard Briggs, Tetsuo Irifune, Olivier Mathon, Mohamed A. Bouhifd

Abstract: The martensitic transformation is a fundamental physical phenomenon at the origin of important industrial applications. However, the underlying microscopic mechanism, which is of critical importance to explain the outstanding mechanical properties of martensitic materials, is still not fully understood. This is because for most martensitic materials the transformation is a fast process that makes… ▽ More The martensitic transformation is a fundamental physical phenomenon at the origin of important industrial applications. However, the underlying microscopic mechanism, which is of critical importance to explain the outstanding mechanical properties of martensitic materials, is still not fully understood. This is because for most martensitic materials the transformation is a fast process that makes in situ studies extremely challenging. Noble solids krypton and xenon undergo a progressive pressure induced fcc to hcp martensitic transition with a very wide coexistence domain. Here, we took advantage of this unique feature to study the detailed mechanism of the transformation by employing in situ X-ray diffraction and absorption. We evidenced a four stages mechanism where the lattice mismatch between the fcc and hcp forms plays a key role in the generation of strain. We also determined precisely the effect of the transformation on the compression behavior of these materials. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Comments: Main file: 31 pages, 9 figure

Journal ref: Physical Review B 105, 144103 (2022)

Magnetic Circular Dichroism in Hyperbolic Metamaterial Nanoparticles

Authors: Joel Kuttruff, Alessio Gabbani, Gaia Petrucci, Yingqi Zhao, Marzia Iarossi, Esteban Pedrueza-Villalmanzo, Alexandre Dmitriev, Antonietta Parracino, Giuseppe Strangi, Francesco De Angelis, Daniele Brida, Francesco Pineider, Nicolò Maccaferri

Abstract: The optical properties of some nanomaterials can be controlled by an external magnetic field, providing active functionalities for a wide range of applications, from single-molecule sensing to nanoscale nonreciprocal optical isolation. Materials with broadband tunable magneto-optical response are therefore highly desired for various components in next-generation integrated photonic nanodevices. Co… ▽ More The optical properties of some nanomaterials can be controlled by an external magnetic field, providing active functionalities for a wide range of applications, from single-molecule sensing to nanoscale nonreciprocal optical isolation. Materials with broadband tunable magneto-optical response are therefore highly desired for various components in next-generation integrated photonic nanodevices. Concurrently, hyperbolic metamaterials received a lot of attention in the past decade since they exhibit unusual properties that are rarely observed in nature and provide an ideal platform to control the optical response at the nanoscale via careful design of the effective permittivity tensor, surpassing the possibilities of conventional systems. Here, we experimentally study magnetic circular dichroism in a metasurface made of type-II hyperbolic nanoparticles on a transparent substrate. Numerical simulations confirm the experimental findings, and an analytical model is established to explain the physical origin of the observed magneto-optical effects, which can be described in terms of the coupling of fundamental electric and magnetic dipole modes with an external magnetic field. Our system paves the way for the development of nanophotonic active devices combining the benefits of sub-wavelength light manipulation in hyperbolic metamaterials supporting a large density of optical states with the ability to freely tune the magneto-optical response via control over the anisotropic permittivity of the system. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Enhanced nonlinear optical response of single metal-dielectric nanocavities resonating in the near-infrared

Authors: Nicolò Maccaferri, Attilio Zilli, Tommi Isoniemi, Lavinia Ghirardini, Marzia Iarossi, Marco Finazzi, Michele Celebrano, Francesco De Angelis

Abstract: Harmonic generation mechanisms are of great interest in nanoscience and nanotechnology, since they allow generating visible light by using near-infrared radiation, which is particularly suitable for its endless applications in bio-nanophotonics and opto-electronics. In this context, multilayer metal-dielectric nanocavities are widely used for light confinement and waveguiding at the nanoscale. The… ▽ More Harmonic generation mechanisms are of great interest in nanoscience and nanotechnology, since they allow generating visible light by using near-infrared radiation, which is particularly suitable for its endless applications in bio-nanophotonics and opto-electronics. In this context, multilayer metal-dielectric nanocavities are widely used for light confinement and waveguiding at the nanoscale. They exhibit intense and localized resonances that can be conveniently tuned in the near-infrared and are therefore ideal for enhancing nonlinear effects in this spectral range. In this work, we experimentally investigate the nonlinear optical response of multilayer metal-dielectric nanocavities. By engineering their absorption efficiency and exploiting their intrinsic interface-induced symmetry breaking, we achieve one order of magnitude higher second-harmonic generation efficiency compared to gold nanostructures featuring the same geometry and resonant behavior. In particular, while the third order nonlinear susceptibility is comparable with that of bulk Au, we estimate a second order nonlinear susceptibility of the order of 1 pm/V, which is comparable with that of typical nonlinear crystals. We envision that our system, which combines the advantages of both plasmonic and dielectric materials, might enable the realization of composite and multi-functional nano-systems for an efficient manipulation of nonlinear optical processes at the nanoscale. △ Less

Submitted 1 October, 2020; originally announced October 2020.

Decoding Ultrafast Polarization Responses in Lead Halide Perovskites by the Two-Dimensional Optical Kerr Effect

Authors: Sebastian F. Maehrlein, Prakriti P. Joshi, Lucas Huber, Feifan Wang, Marie Cherasse, Yufeng Liu, Dominik M. Juraschek, Edoardo Mosconi, Daniele Meggiolaro, Filippo de Angelis, X. -Y. Zhu

Abstract: The ultrafast polarization response to incident light and ensuing exciton/carrier generation are essential to outstanding optoelectronic properties of lead halide perovskites (LHPs). A large number of mechanistic studies in the LHP field to date have focused on contributions to polarizability from organic cations and the highly polarizable inorganic lattice. For a comprehensive understanding of th… ▽ More The ultrafast polarization response to incident light and ensuing exciton/carrier generation are essential to outstanding optoelectronic properties of lead halide perovskites (LHPs). A large number of mechanistic studies in the LHP field to date have focused on contributions to polarizability from organic cations and the highly polarizable inorganic lattice. For a comprehensive understanding of the ultrafast polarization response, we must additionally account for the nearly instantaneous hyperpolarizability response to the propagating light field itself. While light propagation is pivotal to optoelectronics and photonics, little is known about this in LHPs in the vicinity of the bandgap where stimulated emission, polariton condensation, superfluorescence, and photon recycling may take place. Here we develop two-dimensional optical Kerr effect (2D-OKE) spectroscopy to energetically dissect broadband light propagation and dispersive nonlinear polarization responses in LHPs. In contrast to earlier interpretations, the below-bandgap OKE responses in both hybrid CH3NH3PbBr3 and all-inorganic CsPbBr3 perovskites are found to originate from strong hyperpolarizability and highly anisotropic dispersions. In both materials, the nonlinear mixing of anisotropically propagating light fields result in convoluted oscillatory polarization dynamics. Based on a four-wave mixing model, we quantitatively derive dispersion anisotropies, reproduce 2D-OKE frequency correlations, and establish polarization dressed light propagation in single crystal LHPs. Moreover, our findings highlight the importance of distinguishing the often-neglected anisotropic light propagation from underlying coherent quasi-particle responses in various forms of ultrafast spectroscopy. △ Less

Submitted 24 October, 2020; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: 22 pages, 5 figures, 32 pages SI

Hyperbolic Metamaterial Nanoparticles for Efficient Hyperthermia in the II and III Near-Infrared Windows

Authors: Yingqi Zhao, Marzia Iarossi, Nicolò Maccaferri, Lieselot Deleye, Giovanni Melle, Jian-An Huang, Francesco Tantussi, Tommi Isoniemi, Francesco De Angelis

Abstract: The use of gold nanoparticles for hyperthermia therapy in near infrared (NIR) spectral regions has catalysed substantial research efforts due to the potential impact in clinical therapy applications. However, the photoscattering effect scaling with the square of the nanoparticle volume leads to a low absorption efficiency, which has hindered the utility of gold nanoparticles in NIR II regions abov… ▽ More The use of gold nanoparticles for hyperthermia therapy in near infrared (NIR) spectral regions has catalysed substantial research efforts due to the potential impact in clinical therapy applications. However, the photoscattering effect scaling with the square of the nanoparticle volume leads to a low absorption efficiency, which has hindered the utility of gold nanoparticles in NIR II regions above 1000 nm. Here, we conquer this limit by introducing hyperbolic metamaterial nanoparticles that are made of multi-layered gold/dielectric nanodisks and exhibit >70% absorption efficiency in the NIR II and III regions. Their high light-to-heat conversion is demonstrated by a much larger temperature increase than that of gold nanodisks with the same amount of gold. Efficient in vitro hyperthermia of living cells with negligible cytotoxicity shows the potential of our approach for next-generation bio-medical applications. △ Less

Submitted 27 May, 2020; originally announced May 2020.

lambda DNA through a plasmonic nanopore What can be detected by means of Surface Enhanced Raman Scattering?

Authors: Aliaksandr Hubarevich, Jian-An Huang, Giorgia Giovannini, Andrea Schirato, Yingqi Zhao, Nicolò Maccaferri, Francesco De Angelis, Alessandro Alabastri, Denis Garoli

Abstract: Engineered electromagnetic fields in plasmonic nanopores enable enhanced optical detection and their use in single molecule sequencing. Here, a plasmonic nanopore prepared in a thick nanoporous film is used to investigate the interaction between the metal and a long-chain double strand DNA molecule. We discuss how the matrix of nanoporous metal can interact with the molecule thanks to: i) transien… ▽ More Engineered electromagnetic fields in plasmonic nanopores enable enhanced optical detection and their use in single molecule sequencing. Here, a plasmonic nanopore prepared in a thick nanoporous film is used to investigate the interaction between the metal and a long-chain double strand DNA molecule. We discuss how the matrix of nanoporous metal can interact with the molecule thanks to: i) transient aspecific interactions between the porous surface and DNA and ii) optical forces exerted by the localized field in a metallic nanostructure. A duration of interaction up to tens of milliseconds enables to collect high signal-to-noise Raman vibrations allowing an easy label-free reading of information from the DNA molecule. Moreover, in order to further increase the event of detection rate, we tested a polymeric porous hydrogel placed beneath the solid-state membrane. This approach enables a slowdown of the molecule diffusion, thus increasing the number of detected interactions by a factor of about 20. △ Less

Submitted 2 April, 2020; originally announced April 2020.

Designer Bloch Plasmon Polariton Dispersion in Hyperbolic Meta-Gratings

Authors: Nicolò Maccaferri, Tommi Isoniemi, Michael Hinczewski, Marzia Iarossi, Giuseppe Strangi, Francesco De Angelis

Abstract: Hyperbolic metamaterials (HMMs) represent a novel class of fascinating anisotropic plasmonic materials, supporting highly confined propagating plasmon polaritons in addition to surface plasmon polaritons. However, it is very challenging to tailor and excite these modes at optical frequencies by prism coupling because of the intrinsic difficulties in engineering non-traditional optical properties w… ▽ More Hyperbolic metamaterials (HMMs) represent a novel class of fascinating anisotropic plasmonic materials, supporting highly confined propagating plasmon polaritons in addition to surface plasmon polaritons. However, it is very challenging to tailor and excite these modes at optical frequencies by prism coupling because of the intrinsic difficulties in engineering non-traditional optical properties with artificial nanostructures and the unavailability of high refractive index prisms for matching the momentum between the incident light and the guided modes. Here, we report the mechanism of excitation of high-k Bloch-like Plasmon Polariton (BPPs) modes with ultrasmall modal volume using a meta-grating, which is a combined structure of a metallic diffraction grating and a type II HMM. We show how a 1D plasmonic grating without any mode in the infrared spectral range, if coupled to a HMM supporting high-k modes, can efficiently enable the excitation of these modes via coupling to far-field radiation. Our theoretical predictions are confirmed by reflection measurements as a function of angle of incidence and excitation wavelength. We introduce design principles to achieve a full control of high-k modes in meta-gratings, thus enabling a better understanding of light-matter interaction in this type of hybrid meta-structures. The proposed spectral response engineering is expected to find potential applications in bio-chemical sensors, integrated optics and optical sub-wavelength imaging. △ Less

Submitted 27 March, 2020; v1 submitted 20 March, 2020; originally announced March 2020.

How to puncture a biomembrane: elastic versus entropic rupture

Authors: Rosario Capozza, Luca Giomi, Carlo A. Gonano, Francesco De Angelis

Abstract: A very common strategy to penetrate the cell membrane and access the internal compartment, consists of using sharp tips or nano needles. However recent experiments of cell penetration by atomic force microscopy tips show, contrary to expectations, a weak dependence of penetration force on the curvature of the tip. Using molecular dynamics simulations and analytical arguments, here we show that mem… ▽ More A very common strategy to penetrate the cell membrane and access the internal compartment, consists of using sharp tips or nano needles. However recent experiments of cell penetration by atomic force microscopy tips show, contrary to expectations, a weak dependence of penetration force on the curvature of the tip. Using molecular dynamics simulations and analytical arguments, here we show that membrane disruption can be driven either by elastic or entropic forces depending on the membrane size. Our findings have potentially relevant implications in tissue engineering and drug delivery, as they help assessing the effectiveness of the most common membranes penetration methods. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Comments: 5 pages, 4 figures

Chemically-controlled self-assembly of hybrid plasmonic nanopores on graphene

Authors: Giorgia Giovannini, Matteo Ardini, Nicolo Maccaferri, Xavier Zambrana-Puyalto, Gloria Panella, Francesco Angelucci, Rodolfo Ippoliti, Denis Garoli, Francesco De Angelis

Abstract: Thanks to the spontaneous interaction between noble metals and biological scaffolds, nanomaterials with unique features can be achieved following relatively straightforward and cost-efficient synthetic procedures. Here, plasmonic silver nanorings are synthesized on a ring-like Peroxiredoxin (PRX) protein and used to assemble large arrays of functional nanostructures. The PRX protein drives the see… ▽ More Thanks to the spontaneous interaction between noble metals and biological scaffolds, nanomaterials with unique features can be achieved following relatively straightforward and cost-efficient synthetic procedures. Here, plasmonic silver nanorings are synthesized on a ring-like Peroxiredoxin (PRX) protein and used to assemble large arrays of functional nanostructures. The PRX protein drives the seeding growth of metal silver under wet reducing conditions, yielding nanorings with outer and inner diameters down to 28 and 3 nm, respectively. The obtained hybrid nanostructures can be deposited onto a solid-state membrane in order to prepare plasmonic nanopores. In particular, the interaction between graphene and PRX allows for the simple preparation of ordered arrays of plasmonic nanorings on a 2D-material membrane. This fabrication process can be finalized by drilling a nanometer scale pore in the middle of the ring. Fluorescence spectroscopic measurements have been used to demonstrate the plasmonic enhancement induced by the metallic ring. Finally, we support the experimental findings with some numerical simulations showing that the nanorings are endowed with a remarkable plasmonic field within the cavity. Our results represent a proof of concept of a fabrication process that could be suitable for nanopore-based technologies such as next-generation sequencing and single-molecule detection. △ Less

Submitted 14 August, 2019; originally announced August 2019.

SERS discrimination of single amino acid residue in single peptide by plasmonic nanocavities

Authors: Jian-An Huang, Mansoureh Z. Mousavi, Giorgia Giovannini, Yingqi Zhao, Aliaksandr Hubarevich, Denis Garoli, Francesco De Angelis

Abstract: Surface-enhanced Raman spectroscopy (SERS) is a sensitive label-free optical method that can provide fingerprint Raman spectra of biomolecules such as DNA, amino acids and proteins. While SERS of single DNA molecule has been recently demonstrated, Raman analysis of single protein sequence was not possible because the SERS spectra of proteins are usually dominated by signals of aromatic amino acid… ▽ More Surface-enhanced Raman spectroscopy (SERS) is a sensitive label-free optical method that can provide fingerprint Raman spectra of biomolecules such as DNA, amino acids and proteins. While SERS of single DNA molecule has been recently demonstrated, Raman analysis of single protein sequence was not possible because the SERS spectra of proteins are usually dominated by signals of aromatic amino acid residues. Here, we used electroplasmonic approach to trap single gold nanoparticle in a nanohole for generating a plasmonic nanocavity between the trapped nanoparticle and the nanopore wall. The giant field generated in the nanocavity was so sensitive and localized that it enables SERS discrimination of 10 distinct amino acids at single-molecule level. The obtained spectra are used to analyze the spectra of 2 biomarkers (Vasopressin and Oxytocin) made of a short sequence of 9 amino-acids. Significantly, we demonstrated identification of single non-aromatic amino acid residues in a single short peptide chain as well as discrimination between two peptides with sequences distinguishable in 2 specific amino-acids. Our result demonstrate the high sensitivity of our method to identify single amino acid residue in a protein chain and a potential for further applications in proteomics and single-protein sequencing. △ Less

Submitted 13 December, 2019; v1 submitted 9 August, 2019; originally announced August 2019.

Comments: Totally 22 pages, 12 figures and 3 tables including supporting information. arXiv admin note: text overlap with arXiv:1905.01856

Journal ref: Angewandte Chemie International Edition, 59, 11423-11431 (2020)

On solutions related to FitzHugh-Rinzel type model

Authors: Fabio De Angelis, Monica De Angelis

Abstract: A ternary autonomous dynamical system of FitzHugh-Rinzel type is analyzed. The system, at start, is reduced to a nonlinear integro differential equation. The fundamental solution $ H(x,t) $ is explicitly determined and the initial value problem is analyzed in the whole space. The solution is expressed by means of an integral equation involving $ H(x,t) $. Moreover, adding an extra control term, ex… ▽ More A ternary autonomous dynamical system of FitzHugh-Rinzel type is analyzed. The system, at start, is reduced to a nonlinear integro differential equation. The fundamental solution $ H(x,t) $ is explicitly determined and the initial value problem is analyzed in the whole space. The solution is expressed by means of an integral equation involving $ H(x,t) $. Moreover, adding an extra control term, explicit solutions are achieved. △ Less

Submitted 4 April, 2022; v1 submitted 31 July, 2019; originally announced August 2019.

Comments: Keywords: FitzHugh-Rinzel model, Fundamental solution, Laplace transform,Exact solutions

MSC Class: 35K47; 35K25; 78A70; 35E05; 44A10

Journal ref: Ricerche di Matematica Volume 70, Issue 1, June 2021, Pages 51-65

Nanoporous Aluminum-Magnesium Alloy for UV enhanced spectroscopy

Authors: Paolo Ponzellini, Giorgia Giovannini, Sandro Cattarin, Remo Proietti Zaccaria, Sergio Marras, Mirko Prato, Andrea Schirato, Francesco D Amico, Eugenio Calandrini, Francesco De Angelis, Wei Yang, Hai-Jun **, Alessandro Alabastri, Denis Garoli

Abstract: We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experim… ▽ More We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experimentally demonstrate its efficacy in enhancing fluorescence and surface Raman scattering for excitation wavelengths of 360 nm and 257 nm respectively. Finally, we numerically show the superior performance of the nanoporous Al-Mg alloy in the UV range when compared to equivalent porous gold structures. The large area to surface ratio provided by this material make it a promising platform for a wide range of applications in UV/deep-UV plasmonics. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Single-molecule DNA Bases Discrimination in Oligonucleotides by Controllable Trap** in Plasmonic Nanoholes

Authors: Jian-An Huang, Mansoureh Z. Mousavi, Yingqi Zhao, Aliaksandr Hubarevich, Fatima Omeis, Giorgia Giovannini, Moritz Schütte, Denis Garoli, Francesco De Angelis

Abstract: Surface-enhanced Raman spectroscopy (SERS) sensing of DNA sequences by plasmonic nanopores could pave a way to new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. However, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not suf… ▽ More Surface-enhanced Raman spectroscopy (SERS) sensing of DNA sequences by plasmonic nanopores could pave a way to new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. However, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not sufficient for single-molecule analysis. In this work, we report an approach to control the time that molecules reside in the hot spot by physically adsorbing them onto a gold nanoparticle and then trap** the single nanoparticle in a plasmonic nanohole. By trap** the nanoparticle for up to minutes, we demonstrate single-molecule SERS detection of all 4 DNA bases as well as discrimination of single nucleobases in a single oligonucleotide. Our method can be extended easily to label-free sensing of single-molecule amino acids and proteins. △ Less

Submitted 6 May, 2019; originally announced May 2019.

Comments: 29 pages and 11 figures including supporting information

Journal ref: Nature Communications 10, 5321 (2019)

High sensitivity nanoporous gold metamaterials for plasmonic sensing

Authors: Denis Garoli, Eugenio Calandrini, Giorgia Giovannini, Aliax Hubarevich, Vincenzo Caligiuri, Francesco De Angelis

Abstract: Surface Plasmon Resonance sensors are a well-established class of sensors which includes a very large variety of materials and detection schemes. However, the development of portable devices is still challenging as due to the intrinsic complexity of the optical excitation/detection schemes. In this work we show that Nanoporous gold (NPG) films may overcome these limitations by providing excellent… ▽ More Surface Plasmon Resonance sensors are a well-established class of sensors which includes a very large variety of materials and detection schemes. However, the development of portable devices is still challenging as due to the intrinsic complexity of the optical excitation/detection schemes. In this work we show that Nanoporous gold (NPG) films may overcome these limitations by providing excellent sensitivity without the need of sophisticated fabrication approaches and/or optical setup. The sensing mechanism is related the co-localization of optical energy and analytes into the pores that promote an enhanced light-matter coupling. As result, when molecules are adsorbed into the pores, the NPG film shows a significant spectral shift of the effective plasma frequency and then an abrupt change of the reflectivity. By monitoring the reflectivity in the spectral region close to the plasma frequency (namely the plasma edge) is then possible to detect the analyte. Through a set of experiments we demonstrated a sensitivity exceeding 15.000 nm/RIU in the Near Infrared Range that is comparable with the state of the art of plasmonic metamaterials. △ Less

Submitted 11 March, 2022; v1 submitted 9 April, 2019; originally announced April 2019.

Switchable two-state plasmonic tweezers for dynamic manipulation of nano-objects

Authors: Gabriele C. Messina, Xavier Zambrana-Puyalto, Nicolò Maccaferri, Denis Garoli, Francesco De Angelis

Abstract: In this work we present a plasmonic platform capable of trap** nano-objects as small as 100 nm in two different spatial configurations. The switch between the two trap** states, localized on the tip and on the outer wall of a vertical gold nanochannel, can be activated by a variation in the focusing position of the excitation laser along the main axis of the nanotube. We show that the trap**… ▽ More In this work we present a plasmonic platform capable of trap** nano-objects as small as 100 nm in two different spatial configurations. The switch between the two trap** states, localized on the tip and on the outer wall of a vertical gold nanochannel, can be activated by a variation in the focusing position of the excitation laser along the main axis of the nanotube. We show that the trap** mechanism is facilitated by both an electromagnetic and thermal action. The inner and outer trap** states are respectively characterized by a static and a dynamic behavior and their stiffness was measured by analyzing the position of the trapped specimens as a function of time. In addition, it was demonstrated that the stiffness of the static state is high enough to trap of particles as small as 40nm. These results show a simple, controllable way to generate a switchable two-state trap** regime, which could find applications as a model for the study of dynamic trap** or as mechanism for the development of nanofluidic devices. △ Less

Submitted 13 April, 2019; v1 submitted 9 March, 2019; originally announced March 2019.

Plasmon-Assisted Suppression of Surface Trap States and Enhanced Band-Edge Emission in a Bare CdTe Quantum Dot

Authors: Assegid M. Flatae, Francesco Tantussi, Gabriele C. Messina, Francesco De Angelis, Mario Agio

Abstract: Colloidal quantum dots have emerged as a versatile photoluminescent and optoelectronic material. Limitations like fluorescence intermittency, non-radiative Auger recombination and surface traps are commonly addressed by growing a wide-bandgap shell. However, the shell isolates the excitonic wave function and reduces its interaction with the external environment necessary for different applications… ▽ More Colloidal quantum dots have emerged as a versatile photoluminescent and optoelectronic material. Limitations like fluorescence intermittency, non-radiative Auger recombination and surface traps are commonly addressed by growing a wide-bandgap shell. However, the shell isolates the excitonic wave function and reduces its interaction with the external environment necessary for different applications. Furthermore, their long emission lifetime hinders their use in high-speed optoelectronics. Here, we demonstrate a high degree of control on the photophysics of a bare core CdTe quantum dot solely by plasmon-coupling, showing that more than 99% of the surface defect-state emission from a trap-rich quantum dot can be quenched. Moreover, the band-edge state excitonic and biexcitonic emission rates are Purcell enhanced by 1460 and 613-fold, respectively. Our findings show how plasmon-coupling on bare quantum dots could make chemical approaches developed for improving their optical properties unnecessary, with implications for nanoscale lasers, light emitting devices, solar cells, and ultrafast single-photon sources. △ Less

Submitted 16 April, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Journal ref: J. Chem. Phys. Lett. 10, 2874 (2019)

Cooperative energy transfer controls the spontaneous emission rate beyond field enhancement limits

Authors: Mohamed ElKabbash, Ermanno Miele, Ahmad K. Fumani, Michael S. Wolf, Angelo Bozzola, Elisha Haber, Tigran V. Shahbazyan, Jesse Berezovsky, Francesco De Angelis, Giuseppe Strangi

Abstract: Quantum emitters located in proximity to a metal nanostructure individually transfer their energy via near-field excitation of surface plasmons. The energy transfer process increases the spontaneous emission (SE) rate due to plasmon-enhanced local field. Here, we demonstrate significant acceleration of quantum emitter SE rate in a plasmonic nano-cavity due to cooperative energy transfer (CET) from… ▽ More Quantum emitters located in proximity to a metal nanostructure individually transfer their energy via near-field excitation of surface plasmons. The energy transfer process increases the spontaneous emission (SE) rate due to plasmon-enhanced local field. Here, we demonstrate significant acceleration of quantum emitter SE rate in a plasmonic nano-cavity due to cooperative energy transfer (CET) from plasmon-correlated emitters. Using an integrated plasmonic nano-cavity, we realize up to six-fold enhancement in the emission rate of emitters coupled to the same nano-cavity on top of the plasmonic enhancement of the local density of states. The radiated power spectrum retains the plasmon resonance central frequency and lineshape, with the peak amplitude proportional to the number of excited emitters indicating that the observed cooperative SE is distinct from super-radiance. Plasmon-assisted CET offers unprecedented control over the SE rate and allows to dynamically control the spontaneous emission rate at room temperature enabling an SE rate based optical modulator. △ Less

Submitted 10 January, 2019; originally announced January 2019.

Comments: 23 pages. Includes Supplemental Material

Journal ref: Phys. Rev. Lett. 122, 203901 (2019)

Pump-probe Spectroscopy Study of Ultrafast Temperature Dynamics in Nanoporous Gold

Authors: Michele Ortolani, Andrea Mancini, Arne Budweg, Denis Garoli, Daniele Brida, Francesco de Angelis

Abstract: We explore the influence of the nanoporous structure on the thermal relaxation of electrons and holes excited by ultrashort laser pulses ($\sim 7$ fs) in thin gold films. Plasmon decay into hot electron-hole pairs results in the generation of a Fermi-Dirac distribution thermalized at a temperature $T_{\mathrm{e}}$ higher than the lattice temperature $T_{\mathrm{l}}$. The relaxation times of the en… ▽ More We explore the influence of the nanoporous structure on the thermal relaxation of electrons and holes excited by ultrashort laser pulses ($\sim 7$ fs) in thin gold films. Plasmon decay into hot electron-hole pairs results in the generation of a Fermi-Dirac distribution thermalized at a temperature $T_{\mathrm{e}}$ higher than the lattice temperature $T_{\mathrm{l}}$. The relaxation times of the energy exchange between electrons and lattice, here measured by pump-probe spectroscopy, is slowed down by the nanoporous structure, resulting in much higher peak $T_{\mathrm{e}}$ than for bulk gold films. The electron-phonon coupling constant and the Debye temperature are found to scale with the metal filling factor $f$ and a two-temperature model reproduces the data. The results open the way for electron temperature control in metals by engineering of the nanoporous geometry. △ Less

Submitted 4 January, 2019; originally announced January 2019.

Comments: 6 pages, 3 figures, submitted to Physical Review B

Journal ref: Phys. Rev. B 99, 035435 (2019)

Surface Thermal Gradients Activated by Enhanced Molecular Absorption in Mid-infrared Vertical Antenna Arrays

Authors: Andrea Mancini, Valeria Giliberti, Alessandro Alabastri, Eugenio Calandrini, Francesco De Angelis, Denis Garoli, Michele Ortolani

Abstract: We investigate local heat generation by molecules at the apex of polymer-embedded vertical antennas excited at resonant mid-infrared wavelengths, exploiting the surface enhanced infrared absorption (SEIRA) effect. The embedding of vertical nanoantennas in a non-absorbing polymer creates thermal isolation between the apical hotspot, the locus of heat generation, and the heat sink represented by the… ▽ More We investigate local heat generation by molecules at the apex of polymer-embedded vertical antennas excited at resonant mid-infrared wavelengths, exploiting the surface enhanced infrared absorption (SEIRA) effect. The embedding of vertical nanoantennas in a non-absorbing polymer creates thermal isolation between the apical hotspot, the locus of heat generation, and the heat sink represented by the substrate. Vibrational mid-infrared absorption by strongly absorbing molecules located at the antenna apex then generates nanoscale temperature gradients at the surface. We imaged the thermal gradients by using a nano-photothermal expansion microscope, and we found values up to 10 K/microm in conditions where the radiation wavelength resonates with both the molecule vibrations and the plasmonic mode of the antennas. Values up to 1000 K/microm can be foreseen at maximum quantum cascade laser power. The presented system provides a promising thermoplasmonic platform for antenna-assisted thermophoresis and resonant mid-infrared photocatalysis. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Ultrafast THz probe of photo-induced polarons in lead-halide perovskites

Authors: Eugenio Cinquanta, Daniele Meggiolaro, Silvia G. Motti, Marina Gandini, Marcelo J. P. Alcocer, Quinten Adriaan Akkerman, Caterina Vozzi, Liberato Manna, Filippo De Angelis, Annamaria Petrozza, Salvatore Stagira

Abstract: We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretc… ▽ More We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretching-bending modes of the deformed inorganic sublattice, as confirmed by DFT calculations. △ Less

Submitted 12 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Lett. 122, 166601 (2019)

Site-selective functionalization of plasmonic nanopores for enhanced fluorescence and Förster Resonance Energy Transfer

Authors: Xavier Zambrana-Puyalto, Nicolò Maccaferri, Paolo Ponzellini, Giorgia Giovannini, Francesco De Angelis, Denis Garoli

Abstract: In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with one or more fluorescent dyes. Using an easy and robust fabrication method, we manage to build single plasmonic rings on top of dielectric nanotubes with different inner diameters. The modulation of the dimension of the nanopores allows us to both tailor their field confinement and their Purcell Fa… ▽ More In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with one or more fluorescent dyes. Using an easy and robust fabrication method, we manage to build single plasmonic rings on top of dielectric nanotubes with different inner diameters. The modulation of the dimension of the nanopores allows us to both tailor their field confinement and their Purcell Factor in the visible spectral range. In order to investigate how the changes in geometry influence the fluorescence emission efficiency, thiol-conjugated dyes are anchored on the plasmonic ring, thus forming a functional nanopore. We study the lifetime of ATTO 520 and ATTO 590 attached in two different configurations: single dye, and FRET pair. For the single dye configuration, we observe that the lifetime of both single dyes decreases as the size of the nanopore is reduced. The smallest nanopores yield an experimental Purcell Factor of 6. For the FRET pair configuration, we measure two regimes. For large nanopore sizes, the FRET efficiency remains constant. Whereas for smaller sizes, the FRET efficiency increases from 30 up to 45% with a decrease of the nanopore size. These findings, which have been also supported by numerical simulations, may open new pathways to engineer the energy transfer in plasmonic nanopores with potential applications in photonics and biosensing, in particular in single-molecule detection towards sequencing. △ Less

Submitted 8 November, 2018; originally announced November 2018.

Influence of Disorder and Anharmonic Fluctuations on the Dynamical Rashba Effect in Purely Inorganic Lead-Halide Perovskites

Authors: Arthur Marronnier, Guido Roma, Marcelo Carignano, Yvan Bonnassieux, Claudine Katan, Jacky Even, Edoardo Mosconi, Filippo De Angelis

Abstract: Do** organic metal-halide perovskites with cesium could be the best solution to stabilize highly-efficient perovskite solar cells. The understanding of the respective roles of the organic molecule, on one hand, and the inorganic lattice, on the other, is thus crucial in order to be able to optimize the physical properties of the mixed-cation structures. In particular, the study of the recombinat… ▽ More Do** organic metal-halide perovskites with cesium could be the best solution to stabilize highly-efficient perovskite solar cells. The understanding of the respective roles of the organic molecule, on one hand, and the inorganic lattice, on the other, is thus crucial in order to be able to optimize the physical properties of the mixed-cation structures. In particular, the study of the recombination mechanisms is thought to be one of the key challenges towards full comprehension of their working principles. Using molecular dynamics and frozen phonons, we evidence sub-picosecond anharmonic fluctuations in the fully inorganic $CsPbI_3$ perovskite. We reveal the effect of these fluctuations, combined with spin-orbit coupling, on the electronic band structure, evidencing a dynamical Rashba effect. Our study show that under certain conditions space disorder can quench the Rashba effect. As for time disorder, we evidence a dynamical Rashba effect which is similar to what was found for $MAPbI_3$ and which is still sizable despite temperature disorder, the large investigated supercell, and the absence of the organic cations' motion. We show that the spin texture associated to the Rashba splitting cannot be deemed responsible for a consistent reduction of recombination rates, although the spin mismatch between valence and conduction band increases with the ferroelectric distortion causing the Rashba splitting. △ Less

Submitted 23 November, 2018; v1 submitted 26 October, 2018; originally announced October 2018.

Selective intracellular delivery and intracellular recordings combined on MEA biosensors

Authors: Andrea Cerea, Valeria Caprettini, Giulia Bruno, Laura Lovato, Giovanni Melle, Francesco Tantussi, Rosario Capozza, Fabio Moia, Michele Dipalo, Francesco De Angelis

Abstract: Biological studies on in vitro cell cultures are of fundamental importance to investigate cells response to external stimuli, such as new drugs for treatment of specific pathologies, or to study communication between electrogenic cells. Although three-dimensional (3D) nanostructures brought tremendous improvements on biosensors used for various biological in vitro studies, including drug delivery… ▽ More Biological studies on in vitro cell cultures are of fundamental importance to investigate cells response to external stimuli, such as new drugs for treatment of specific pathologies, or to study communication between electrogenic cells. Although three-dimensional (3D) nanostructures brought tremendous improvements on biosensors used for various biological in vitro studies, including drug delivery and electrical recording, there is still a lack of multifunctional capabilities that could help gaining deeper insights in several bio-related research fields. In this work, the electrical recording of large cell ensembles and the intracellular delivery of few selected cells are combined on the same device by integrating microfluidics channels on the bottom of a multi-electrode array decorated with 3D hollow nanostructures. The novel platform allows to record intracellular-like action potentials from large ensembles of cardiomyocytes derived from human Induced Pluripotent Stem Cells (hiPSC) and from the HL-1 line, while different molecules are selectively delivered into single/few targeted cells. The proposed approach shows high potential for enabling new comprehensive studies that can relate drug effects to network level cell communication processes. △ Less

Submitted 23 August, 2018; originally announced August 2018.

Comments: 14 pages, 3 figures

Controlled integration of MoS2 flakes on nanopores by means of electrophoretic deposition

Authors: Dario Mosconi, Andrea Jacassi, Giorgia Giovannini, Paolo Ponzellini, Nicolo Maccaferri, Paolo Vavassori, Michele Dipalo, Francesco De Angelis, Stefano Agnoli, Denis Garoli

Abstract: We propose an easy and robust strategy for the versatile integration of 2D material flakes on plasmonic nanoholes by means of controlled deposition of MoS2 via electrophoretic process. The method can be applied both to simple metallic flat nanostructures and to complex 3D metallic structures both comprising nanoholes. The deposition method allows the decoration of large ordered arrays of plasmonic… ▽ More We propose an easy and robust strategy for the versatile integration of 2D material flakes on plasmonic nanoholes by means of controlled deposition of MoS2 via electrophoretic process. The method can be applied both to simple metallic flat nanostructures and to complex 3D metallic structures both comprising nanoholes. The deposition method allows the decoration of large ordered arrays of plasmonic structures with single or few layers of MoS2. We show that the plasmonic field generated by the nanohole can interact significantly with the 2D layer, thus representing an ideal system for hybrid 2D-Material/Plasmonic investigation. The controlled and ordered integration of 2D materials on plasmonic nanostructures opens a pathway towards, for instance, enhanced light emission; strong coupling from plasmonic hybrid structures; hot electron generation; and sensors based on 2D materials. △ Less

Submitted 8 August, 2018; originally announced August 2018.

Comments: arXiv admin note: text overlap with arXiv:1806.03643

Controlled Intracellular Delivery of Single Particles in Single Cells by 3D Hollow Nanoelectrodes

Authors: Jian-An Huang, Valeria Caprettini, Yingqi Zhao, Giovanni Melle, Nicolò Maccaferri, Matteo Ardini, Francesco Tantussi, Michele Dipalo, Francesco De Angelis

Abstract: We present an electrophoretic platform based on 3D hollow nanoelectrodes capable of controlling and quantifying the intracellular delivery of single nanoparticles in single selected cells by surface-enhanced Raman spectroscopy (SERS). The gold-coated hollow nanoelectrode has a sub-femtoliter inner volume that allows the confinement and enhancement of electromagnetic fields upon laser illumination… ▽ More We present an electrophoretic platform based on 3D hollow nanoelectrodes capable of controlling and quantifying the intracellular delivery of single nanoparticles in single selected cells by surface-enhanced Raman spectroscopy (SERS). The gold-coated hollow nanoelectrode has a sub-femtoliter inner volume that allows the confinement and enhancement of electromagnetic fields upon laser illumination to distinguish the SERS signals of a single nanoparticle flowing through the nanoelectrode. The tight wrap** of cell membranes around the nanoelectrodes enables effective membrane electroporation such that single gold nanorods are delivered into a living cell with a delivery rate subject to the applied bias voltage. The capability of the 3D hollow nanoelectrodes to porate cells and reveal single emitters from the background under live flow is promising for the analysis of both intracellular delivery and sampling. △ Less

Submitted 20 July, 2018; originally announced July 2018.

Comments: 8 pages and 5 figures

Journal ref: Nano Lett. 2019,19, 2, 722-731

Nanostructured Hyperbolic Meta-Antennas Enable Arbitrary Control of Scattering vs Absorption

Authors: Nicolò Maccaferri, Yingqi Zhao, Marzia Iarossi, Tommi Isoniemi, Antonietta Parracino, Giuseppe Strangi, Francesco De Angelis

Abstract: We show that meta-antennas made of a composite material displaying type II hyperbolic dispersion enable precise and controlled spectral separation of absorption and scattering processes in the visible/near-infrared frequency range. The experimental evidence is supported by a comprehensive theoretical study. We demonstrate that the physical mechanism responsible for the aforementioned effect lies i… ▽ More We show that meta-antennas made of a composite material displaying type II hyperbolic dispersion enable precise and controlled spectral separation of absorption and scattering processes in the visible/near-infrared frequency range. The experimental evidence is supported by a comprehensive theoretical study. We demonstrate that the physical mechanism responsible for the aforementioned effect lies in the different natures of the plasmonic modes excited within the hyperbolic meta-antennas. We prove that it is possible to have a pure scattering channel if an electric dipolar mode is induced, while a pure absorption process can be obtained if a magnetic dipole is excited. Also, by varying the geometry of the system, the relative weight of scattering and absorption can be tuned, thus enabling an arbitrary control of the decay channels. Importantly, both modes can be efficiently excited by direct coupling with the far-field radiation, even when the radiative channel (scattering) is almost totally suppressed, hence making the proposed architecture suitable for practical applications. △ Less

Submitted 18 July, 2018; v1 submitted 4 July, 2018; originally announced July 2018.

Hybrid plasmonic nanostructures based on controlled integration of MoS2 flakes on metallic nanoholes

Authors: Denis Garoli, Dario Mosconi, Ermanno Miele, Nicolo Maccaferri, Matteo Ardini, Giorgia Giovannini, Michele Dipalo, Stefano Agnoli, Francesco De Angelis

Abstract: Here, we propose an easy and robust strategy for the versatile preparation of hybrid plasmonic nanopores by means of controlled deposition of single flakes of MoS2 directly on top of metallic holes. The device is realized on silicon nitride commercial membranes and can be further refined by TEM or FIB milling to achieve the passing of molecules or nanometric particles through a pore. Importantly,… ▽ More Here, we propose an easy and robust strategy for the versatile preparation of hybrid plasmonic nanopores by means of controlled deposition of single flakes of MoS2 directly on top of metallic holes. The device is realized on silicon nitride commercial membranes and can be further refined by TEM or FIB milling to achieve the passing of molecules or nanometric particles through a pore. Importantly, we show that the plasmonic enhancement provided by the nanohole is strongly accumulated in the 2D nanopore, thus representing an ideal system for single-molecule sensing and sequencing in a flow-through configuration. Here, we also demonstrate that the prepared 2D material can be decorated with metallic nanoparticles that can couple their resonance with the nanopore resonance to further enhance the electromagnetic field confinement at the nanoscale level. This method can be applied to any gold nanopore with a high level of reproducibility and parallelization; hence, it can pave the way to the next generation of solid-state nanopores with plasmonic functionalities. Moreover, the controlled/ordered integration of 2D materials on plasmonic nanostructures opens a pathway towards new investigation of the following: enhanced light emission; strong coupling from plasmonic hybrid structures; hot electron generation; and sensors in general based on 2D materials. Nanopore △ Less

Submitted 10 June, 2018; originally announced June 2018.

Tangramob: an agent-based simulation framework for validating urban smart mobility solutions

Authors: Carlo Castagnari, Flavio Corradini, Francesco De Angelis, Jacopo de Berardinis, Giorgio Forcina, Andrea Polini

Abstract: Estimating the effects of introducing a range of smart mobility solutions within an urban area is a crucial concern in urban planning. The lack of a Decision Support System (DSS) for the assessment of mobility initiatives, forces local public authorities and mobility service providers to base their decisions on guidelines derived from common heuristics and best practices. These approaches can help… ▽ More Estimating the effects of introducing a range of smart mobility solutions within an urban area is a crucial concern in urban planning. The lack of a Decision Support System (DSS) for the assessment of mobility initiatives, forces local public authorities and mobility service providers to base their decisions on guidelines derived from common heuristics and best practices. These approaches can help planners in sha** mobility solutions, but given the high number of variables to consider the effects are not guaranteed. Therefore, a solution conceived respecting the available guidelines can result in a failure in a different context. In particular, difficult aspects to consider are the interactions between different mobility services available in a given urban area, and the acceptance of a given mobility initiative by the inhabitants of the area. In order to fill this gap, we introduce Tangramob, an agent-based simulation framework capable of assessing the impacts of a Smart Mobility Initiative (SMI) within an urban area of interest. Tangramob simulates how urban traffic is expected to evolve as citizens start experiencing the newly offered traveling solutions. This allows decision makers to evaluate the efficacy of their initiatives taking into account the current urban system. In this paper we provide an overview of the simulation framework along with its design. To show the potential of Tangramob, 3 mobility initiatives are simulated and compared on the same scenario. This shows how it is possible to perform comparative experiments so as to align mobility initiatives to the user goals. △ Less

Submitted 28 May, 2018; originally announced May 2018.

Cell membrane disruption by vertical nanopillars: the role of membrane bending and traction forces

Authors: Rosario Capozza, Valeria Caprettini, Carlo A. Gonano, Alessandro Bosca, Fabio Moia, Francesca Santoro, Francesco De Angelis

Abstract: Gaining access to the cell interior is fundamental for many applications, such as electrical recording, drug and biomolecular delivery. A very promising technique consists of culturing cells on nano/micro pillars. The tight adhesion and high local deformation of cells in contact with nanostructures can promote the permeabilization of lipids at the plasma membrane, providing access to the internal… ▽ More Gaining access to the cell interior is fundamental for many applications, such as electrical recording, drug and biomolecular delivery. A very promising technique consists of culturing cells on nano/micro pillars. The tight adhesion and high local deformation of cells in contact with nanostructures can promote the permeabilization of lipids at the plasma membrane, providing access to the internal compartment. However, there is still much experimental controversy regarding when and how the intracellular environment is targeted and the role of the geometry and interactions with surfaces. Consequently, we investigated, by coarse-grained molecular dynamics simulations of the cell membrane, the mechanical properties of the lipid bilayer under high strain and bending conditions. We found out that a high curvature of the lipid bilayer dramatically lowers the traction force necessary to achieve membrane rupture. Afterwards, we experimentally studied the permeabilization rate of cell membrane by pillars with comparable aspect ratios but different sharpness values at the edges. The experimental data support the simulation results: even pillars with diameters in the micron range may cause local membrane disruption when their edges are sufficiently sharp. Therefore, the permeabilization likelihood is connected to the local geometric features of the pillars rather than diameter or aspect ratio. The present study can also provide significant contributions to the design of 3D biointerfaces for tissue engineering and cellular growth. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Comments: 23 pages, 5 figures, submitted to Biomaterials

Multiband Plasmonic Sierpinski Carpet Fractal Antennas

Authors: Francesco De Nicola, Nikhil Santh Puthiya Purayil, Davide Spirito, Mario Miscuglio, Francesco Tantussi, Andrea Tomadin, Francesco De Angelis, Marco Polini, Roman Krahne, Vittorio Pellegrini

Abstract: Deterministic fractal antennas are employed to realize multimodal plasmonic devices. Such structures show strongly enhanced localized electromagnetic fields typically in the infrared range with a hierarchical spatial distribution. Realization of engineered fractal antennas operating in the optical regime would enable nanoplasmonic platforms for applications, such as energy harvesting, light sensin… ▽ More Deterministic fractal antennas are employed to realize multimodal plasmonic devices. Such structures show strongly enhanced localized electromagnetic fields typically in the infrared range with a hierarchical spatial distribution. Realization of engineered fractal antennas operating in the optical regime would enable nanoplasmonic platforms for applications, such as energy harvesting, light sensing, and bio/chemical detection. Here, we introduce a novel plasmonic multiband metamaterial based on the Sierpinski carpet (SC) space-filling fractal, having a tunable and polarization-independent optical response, which exhibits multiple resonances from the visible to mid-infrared range. We investigate gold SCs fabricated by electron-beam lithography on CaF$_{2}$ and Si/SiO$_{2}$ substrates. Furthermore, we demonstrate that such resonances originate from diffraction-mediated localized surface plasmons, which can be tailored in deterministic fashion by tuning the shape, size, and position of the fractal elements. Moreover, our findings illustrate that SCs with high order of complexity present a strong and hierarchically distributed electromagnetic near-field of the plasmonic modes. Therefore, engineered plasmonic SCs provide an efficient strategy for the realization of compact active devices with a strong and broadband spectral response in the visible/mid-infrared range. We take advantage of such a technology by carrying out surface enhanced Raman spectroscopy (SERS) on Brilliant Cresyl Blue molecules deposited onto plasmonic SCs. We achieve a broadband SERS enhancement factor up to $10^{4}$, thereby providing a proof-of-concept application for chemical diagnostics. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Comments: 14 pages, 6 figures

Journal ref: ACS Photonics 5, 6, 2418 (2018)

MIM Structure for optical vortex beam generator at nanoscale level

Authors: Denis Garoli, Pierfrancesco Zilio, Yuri Gorodetski, Francesco Tantussi, Francesco De Angelis

Abstract: Optical beams carrying orbital angular momentum (OAM) can find tremendous applications in several fields. In order to apply these particular beams in photonic integrated devices innovative optical elements have been proposed. Here we are interested in the generation of OAM-carrying beams at the nanoscale level. We design and experimentally demonstrate a plasmonic optical vortex emitter, based on a… ▽ More Optical beams carrying orbital angular momentum (OAM) can find tremendous applications in several fields. In order to apply these particular beams in photonic integrated devices innovative optical elements have been proposed. Here we are interested in the generation of OAM-carrying beams at the nanoscale level. We design and experimentally demonstrate a plasmonic optical vortex emitter, based on a metal-insulator-metal holey plasmonic vortex lens. Our plasmonic element is shown to convert im**ing circularly polarized light to an orbital angular momentum state capable of propagating to the far-field. Moreover, the emerging OAM can be externally adjusted by switching the handedness of the incident light polarization. The device has a radius of few micrometers and the OAM beam is generated from subwavelength aperture. The fabrication of integrated arrays of PVLs and the possible simultaneous emission of multiple optical vortices provide an easy way to the large-scale integration of optical vortex emitters for wide-ranging applications. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Journal ref: Garoli, D., Zilio, P., Gorodetski, Y., Tantussi, F. & , De Angelis, F. Optical vortex beam generator at nanoscale level. Scientific Reports 6, 29547 (2016)

Nanoporous gold leaves: plasmonic behavior in the visible and mid-infrared spectral regions

Authors: Denis Garoli, Gianluca Ruffato, Pierfrancesco Zilio, Eugenio Calandrini, Francesco De Angelis, Filippo Romanato, Sandro Cattarin

Abstract: A robust and reproducible preparation of self-standing nanoporous gold leaves (NPGL) is presented, with optical characterization and plasmonic behaviour analysis. Nanoporous gold (NPG) layers are tipically prepared as thin films on a bulk substrate. Here we present an alternative approach consisting in the preparation of NPGL in the form of a self-standing film. This solution leads to a perfectly… ▽ More A robust and reproducible preparation of self-standing nanoporous gold leaves (NPGL) is presented, with optical characterization and plasmonic behaviour analysis. Nanoporous gold (NPG) layers are tipically prepared as thin films on a bulk substrate. Here we present an alternative approach consisting in the preparation of NPGL in the form of a self-standing film. This solution leads to a perfectly symmetric configuration where the metal is immersed in a homogeneous medium and in addition can support the propagation of symmetric and antisymmetric plasmonic modes. With respect to bulk gold, NPG shows metallic behaviour at higher wavelengths, suggesting possible plasmonic applications in the near / medium infrared range. In this work the plasmonic properties in the wide wavelength range from the ultraviolet up to the mid-infrared range have been investigated. △ Less

Submitted 31 March, 2018; originally announced April 2018.

Journal ref: Opt. Mat. Express 5 2246-2256 (2015)

Boosting infrared energy transfer in 3D nanoporous gold antennas

Authors: D. Garoli, E. Calandrini, A. Bozzola, M. Ortolani, S. Cattarin, S. Barison, A. Toma, F. De Angelis

Abstract: The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be… ▽ More The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibrational frequency. The effective optical response of the nanoporous metal enables the penetration of optical fields deep into the nanopores, where molecules can be loaded thus achieving a more efficient light-matter coupling if compared to bulk gold. In order to realize plasmonic resonators made of nanoporous gold, we develop a nanofabrication method based on polymeric templates for metal deposition and we obtain antenna arrays resonating at mid-infrared wavelengths selected by design. We then coat the antennas with a thin (3 nm) silica layer acting as target dielectric layer for optical energy transfer. We study the strength of the light-matter coupling at the vibrational absorption frequency of silica at 1250 cm-1 through the analysis of the experimental Fano lineshape that is benchmarked against identical structures made of bulk gold. The boost of optical energy transfer from free-space mid-infrared radiation to molecular vibrations in nanoporous 3D nanoantenna arrays can open new application routes for plasmon-enhanced physical-chemical reactions. △ Less

Submitted 31 March, 2018; originally announced April 2018.

Journal ref: Nanoscale 9 (2), 915-922, 2017

Fractal-like plasmonic self-similar material with a tailorable plasma frequency in the near-infrared

Authors: Denis Garoli, Eugenio Calandrini, Angelo Bozzola, Andrea Toma, Sandro Cattarin, Michele Ortolani, Francesco De Angelis

Abstract: In this work, we show that modulating the fractal dimension of nanoporous gold allows its effective dielectric response to be tailored over a wide spectral range of infrared wavelengths. In particular, the plasma edge and effective plasma frequency depend linearly on the fractal dimension, which can be controlled by varying the pore and ligament sizes. Importantly, the fractal porous metal exhibit… ▽ More In this work, we show that modulating the fractal dimension of nanoporous gold allows its effective dielectric response to be tailored over a wide spectral range of infrared wavelengths. In particular, the plasma edge and effective plasma frequency depend linearly on the fractal dimension, which can be controlled by varying the pore and ligament sizes. Importantly, the fractal porous metal exhibits superior plasmonic properties compared to its bulk counterpart. These properties, combined with a longer skin depth on the order of 100-200 nm, enables the penetration of optical energy deep into the nanopores where molecules can be loaded, thus achieving more effective light-matter coupling. These findings may open new pathways to engineering the optical response of fractal-like or self-similar metamaterials without the need for sophisticated lithographic patterning. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Comments: 21 pages, 10 figures

Thermoplasmonic Effect of Surface Enhanced Infrared Absorption in Vertical Nanoantenna Arrays

Authors: Andrea Mancini, Valeria Giliberti, Alessandro Alabastri, Eugenio Calandrini, Francesco De Angelis, Denis Garoli, Michele Ortolani

Abstract: The temperature increase and temperature gradients induced by mid-infrared laser illumination of vertical gold nanoantenna arrays embedded into polymer layers was measured directly with a photothermal expansion nanoscope. Nanoscale thermal hotspot images and local temperature increase spectra were both obtained, the latter by broadly tuning the emission wavelength of a quantum cascade laser. The s… ▽ More The temperature increase and temperature gradients induced by mid-infrared laser illumination of vertical gold nanoantenna arrays embedded into polymer layers was measured directly with a photothermal expansion nanoscope. Nanoscale thermal hotspot images and local temperature increase spectra were both obtained, the latter by broadly tuning the emission wavelength of a quantum cascade laser. The spectral analysis indicates that plasmon-enhanced mid-infrared vibrations of molecules located in the antenna hotspots are responsible for some of the thermoplasmonic resonances, while Joule heating in gold is responsible for the remaining resonances. In particular, plasmonic dark modes with low scattering cross-section mostly produce surface-enhanced infrared absorption (SEIRA), while bright modes with strong radiation coupling produce Joule heating. The dark modes do not modify the molecular absorption lineshape and the related temperature increase is chemically triggered by the presence of molecules with vibrational fingerprints resonant with the plasmonic dark modes. The bright modes, instead, are prone to Fano interference, display an asymmetric molecular absorption lineshape and generate heat also at frequencies far from molecular vibrations, insofar lacking chemical specificity. For focused mid-infrared laser power of 50 mW, the measured nanoscale temperature increases are in the range of 10 K and temperature gradients reach 5 K/$μ$m in the case of dark modes resonating with strong infrared vibrations such as the C=O bond of poly-methylmethacrylate at 1730 cm$^{-1}$. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: 17 pages, 4 figures

Magnetic Control of Transmission and Helicity of Nano-Structured Optical Beams in Magnetoplasmonic Vortex Lenses

Authors: Nicolò Maccaferri, Yuri Gorodetski, Andrea Toma, Pierfrancesco Zilio, Francesco De Angelis, Denis Garoli

Abstract: We theoretically investigate the generation of far-field propagating optical beams with a desired orbital angular momentum by using an archetypical magnetoplasmonic tip surrounded by a gold spiral slit. The use of a magnetic material can lead to important implications once magneto-optical activity is activated through the application of an external magnetic field. The physical model and the numeri… ▽ More We theoretically investigate the generation of far-field propagating optical beams with a desired orbital angular momentum by using an archetypical magnetoplasmonic tip surrounded by a gold spiral slit. The use of a magnetic material can lead to important implications once magneto-optical activity is activated through the application of an external magnetic field. The physical model and the numerical study presented here introduce the concept of magnetically tunable plasmonic vortex lens, namely a magnetoplasmonic vortex lens, which ensures a tunable selectivity in the polarization state of the generated nanostructured beam. The presented system provides a promising platform for a localized excitation of plasmonic vortices followed by their beaming in the far-field with an active modulation of both light's transmittance and helicity. △ Less

Submitted 23 October, 2017; v1 submitted 7 September, 2017; originally announced September 2017.

Self-assembly of micro-machining systems powered by Janus micro-motors

Authors: C. Maggi, J. Simmchen, F. Saglimbeni, J Katuri, M. Dipalo, F. De Angelis, S. Sánchez, R. Di Leonardo

Abstract: Integration of active matter in larger micro-devices can provide an embedded source of propulsion and lead to self-actuated micromachining systems that do not rely on any external power or control apparatus. Here we demonstrate that Janus colloids can self-assemble around micro-fabricated rotors in reproducible configurations with a high degree of spatial and orientational order. The final configu… ▽ More Integration of active matter in larger micro-devices can provide an embedded source of propulsion and lead to self-actuated micromachining systems that do not rely on any external power or control apparatus. Here we demonstrate that Janus colloids can self-assemble around micro-fabricated rotors in reproducible configurations with a high degree of spatial and orientational order. The final configuration maximizes the torque applied on the rotor leading to a unidirectional and steady rotating motion. We discuss how the interplay between geometry and dynamical behavior consistently leads to the self-assembly of autonomous micromotors starting from randomly distributed building blocks. △ Less

Submitted 12 July, 2017; originally announced July 2017.

Comments: 17 pages, 6 figures

Journal ref: Small, 12, 446-451, (2016)

Helicity locking in light emitted from a plasmonic nanotaper

Authors: Denis Garoli, Pierfrancesco Zilio, Francesco De Angelis, Yuri Gorodetski

Abstract: Surface plasmon waves carry an intrinsic transverse spin, which is locked to its propagation direction. Apparently, when a singular plasmonic mode is guided on a conic surface this spin-locking may lead to a strong circular polarization of the far-field emission. Specifically, an adiabatically tapered gold nanocone guides an a priori excited plasmonic vortex upwards where the mode accelerates and… ▽ More Surface plasmon waves carry an intrinsic transverse spin, which is locked to its propagation direction. Apparently, when a singular plasmonic mode is guided on a conic surface this spin-locking may lead to a strong circular polarization of the far-field emission. Specifically, an adiabatically tapered gold nanocone guides an a priori excited plasmonic vortex upwards where the mode accelerates and finally beams out from the tip apex. The helicity of this beam is shown to be single-handed and stems solely from the transverse spin-locking of the helical plasmonic wave-front. We present a simple geometric model that fully predicts the emerging light spin in our system. Finally we experimentally demonstrate the helicity-locking phenomenon by using accurately fabricated nanostructures and confirm the results with the model and numerical data. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Comments: 15 pages, 4 figures

Beaming of helical light from plasmonic vortices via adiabatically tapered nanotip

Authors: Denis Garoli, Pierfrancesco Zilio, Yuri Gorodetski, Francesco Tantussi, Francesco De Angelis

Abstract: We demonstrate the generation of far-field propagating optical beams with a desired orbital angular momentum by using a smooth optical mode transformation between a plasmonic vortex and free space Laguerre-Gaussian modes. This is obtained by means of an adiabatically tapered gold tip surrounded by a spiral slit. The proposed physical model, backed up by the numerical study, brings about an optimiz… ▽ More We demonstrate the generation of far-field propagating optical beams with a desired orbital angular momentum by using a smooth optical mode transformation between a plasmonic vortex and free space Laguerre-Gaussian modes. This is obtained by means of an adiabatically tapered gold tip surrounded by a spiral slit. The proposed physical model, backed up by the numerical study, brings about an optimized structure which is fabricated by using highly reproducible secondary electron lithography technique. Optical measurements of the structure excellently agree with the theoretically predicted far-field distributions. This architecture provides a unique platform for a localized excitation of plasmonic vortices followed by its beaming. △ Less

Submitted 18 September, 2016; originally announced September 2016.

Comments: Nano Letters, 2016

Large scale GW-BSE calculations with N3 scaling: excitonic effects in dye sensitised solar cells

Authors: Margherita Marsili, Edoardo Mosconi, Filippo De Angelis, Paolo Umari

Abstract: Excitonic effects due to electron-hole coupling play a fundamental role in renormalising energy levels in dye sensitised and organic solar cells determining the driving force for electron extraction. We show that first-principles calculations based on many-body perturbation theory within the GW-BSE approach provide a quantitative picture of interfacial excited state energetics in organic dye-sensi… ▽ More Excitonic effects due to electron-hole coupling play a fundamental role in renormalising energy levels in dye sensitised and organic solar cells determining the driving force for electron extraction. We show that first-principles calculations based on many-body perturbation theory within the GW-BSE approach provide a quantitative picture of interfacial excited state energetics in organic dye-sensitized TiO2 , delivering a general rule for evaluating relevant energy levels.To perform GW-BSE calculations in such large systems we introduce a new scheme based on maximally localized Wannier functions. With this method the overall scaling of GW-BSE calculations is reduced from O(N4) to O(N3). △ Less

Submitted 29 August, 2016; v1 submitted 17 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. B 95, 075415 (2017)

Relativistic Solar Cells

Authors: Paolo Umari, Edoardo Mosconi, Filippo De Angelis

Abstract: Hybrid AMX3 perovskites (A=Cs, CH3NH3; M=Sn, Pb; X=halide) have revolutionized the scenario of emerging photovoltaic technologies. Introduced in 2009 by Kojima et al., a rapid evolution very recently led to 15% efficient solar cells. CH3NH3PbI3 has so far dominated the field, while the similar CH3NH3SnI3 has not been explored for photovoltaic applications, despite the reduced band-gap. Replacement… ▽ More Hybrid AMX3 perovskites (A=Cs, CH3NH3; M=Sn, Pb; X=halide) have revolutionized the scenario of emerging photovoltaic technologies. Introduced in 2009 by Kojima et al., a rapid evolution very recently led to 15% efficient solar cells. CH3NH3PbI3 has so far dominated the field, while the similar CH3NH3SnI3 has not been explored for photovoltaic applications, despite the reduced band-gap. Replacement of Pb by the more environment-friendly Sn would facilitate the large uptake of perovskite-based photovoltaics. Despite the extremely fast progress, the materials electronic properties which are key to the photovoltaic performance are relatively little understood. Here we develop an effective GW method incorporating spin-orbit coupling which allows us to accurately model the electronic, optical and transport properties of CH3NH3SnI3 and CH3NH3PbI3, opening the way to new materials design. The different CH3NH3SnI3 and CH3NH3PbI3 properties are discussed in light of their exploitation for solar cells, and found to be entirely due to relativistic effects. △ Less

Submitted 19 September, 2013; originally announced September 2013.

Comments: 16 pages, 4 figures

Journal ref: Scientific Reports 4, 4467 (2014)

Nonlinear graphene metamaterial

Authors: Andrey E. Nikolaenko, Nikitas Papasimakis, Evangelos Atmatzakis, Zhiqiang Luo, Ze Xiang Shen, Francesco De Angelis, Stuart A. Boden, Enzo Di Fabrizio, Nikolay I. Zheludev

Abstract: We demonstrate that the broadband nonlinear optical response of graphene can be resonantly enhanced by more than an order of magnitude through hybridization with a plasmonic metamaterial,while retaining an ultrafast nonlinear response time of ~1 ps. Transmission modulation close to ~1% is seen at a pump uence of ~0.03 mJ/cm^2 at the wavelength of ~1600 nm. This approach allows to engineer and enha… ▽ More We demonstrate that the broadband nonlinear optical response of graphene can be resonantly enhanced by more than an order of magnitude through hybridization with a plasmonic metamaterial,while retaining an ultrafast nonlinear response time of ~1 ps. Transmission modulation close to ~1% is seen at a pump uence of ~0.03 mJ/cm^2 at the wavelength of ~1600 nm. This approach allows to engineer and enhance graphene's nonlinearity within a broad wavelength range enabling applications in optical switching, mode-locking and pulse sha**. △ Less

Submitted 23 March, 2012; originally announced March 2012.

Comments: The following article has been submitted to Applied Physics Letters. After it is published, it will be found at http://apl.aip.org/

Phase-change chalcogenide glass metamaterial

Authors: Z. L. Samson, K. F. MacDonald, F. De Angelis, K. Knight, C. C. Huang, E. Di Fabrizio, D. W. Hewak, N. I. Zheludev

Abstract: Combining metamaterials with functional media brings a new dimension to their performance. Here we demonstrate substantial resonance frequency tuning in a photonic metamaterial hybridized with an electrically/optically switchable chalcogenide glass. The transition between amorphous and crystalline forms brings about a 10% shift in the near-infrared resonance wavelength of an asymmetric split-rin… ▽ More Combining metamaterials with functional media brings a new dimension to their performance. Here we demonstrate substantial resonance frequency tuning in a photonic metamaterial hybridized with an electrically/optically switchable chalcogenide glass. The transition between amorphous and crystalline forms brings about a 10% shift in the near-infrared resonance wavelength of an asymmetric split-ring array, providing transmission modulation functionality with a contrast ratio of 4:1 in a device of sub-wavelength thickness. △ Less

Submitted 21 December, 2009; originally announced December 2009.

Comments: 3 pages, 3 figures

Journal ref: Appl. Phys. Lett. 96, 143105 (2010)

Giant nonlinearity of carbon nanotubes in a photonic metamaterial

Authors: Andrey E. Nikolaenko, Francesco De Angelis, Stuart A. Boden, Nikitas Papasimakis, Peter Ashburn, Enzo Di Fabrizio, Nikolay I. Zheludev

Abstract: Metamaterials, artificial media structured on the subwavelength scale offer a rich paradigm for develo** unique photonic functionalities ranging from negative index of refraction and directionally asymmetric transmission to slowing light. Here we demonstrate that a combination of carbon nanotubes with a photonic metamaterial offers a new paradigm for the development of nonlinear media with exc… ▽ More Metamaterials, artificial media structured on the subwavelength scale offer a rich paradigm for develo** unique photonic functionalities ranging from negative index of refraction and directionally asymmetric transmission to slowing light. Here we demonstrate that a combination of carbon nanotubes with a photonic metamaterial offers a new paradigm for the development of nonlinear media with exceptionally strong ultrafast nonlinear response invaluable in photonic applications. It is underpinned by strong coupling between weakly radiating Fano-type resonant plasmonic modes and the excitonic response of single-walled semiconductor carbon nanotubes. Using a "combinatorial" approach to material discovery we show that the optical response of such a composite system can be tailored and optimized by metamaterial design. △ Less

Submitted 3 December, 2009; originally announced December 2009.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 104, 153902 (2010)