-
Real-time imaging of standing-wave patterns in microresonators
Authors:
Haochen Yan,
Alekhya Ghosh,
Arghadeep Pal,
Hao Zhang,
Toby Bi,
George Ghalanos,
Shuangyou Zhang,
Lewis Hill,
Yao**g Zhang,
Yongyong Zhuang,
Jolly Xavier,
Pascal DelHaye
Abstract:
Real-time characterization of microresonator dynamics is important for many applications. In particular it is critical for near-field sensing and understanding light-matter interactions. Here, we report camera-facilitated imaging and analysis of standing wave patterns in optical ring resonators. The standing wave pattern is generated through bi-directional pum** of a microresonator and the scatt…
▽ More
Real-time characterization of microresonator dynamics is important for many applications. In particular it is critical for near-field sensing and understanding light-matter interactions. Here, we report camera-facilitated imaging and analysis of standing wave patterns in optical ring resonators. The standing wave pattern is generated through bi-directional pum** of a microresonator and the scattered light from the microresonator is collected by a short-wave infrared (SWIR) camera. The recorded scattering patterns are wavelength dependent, and the scattered intensity exhibits a linear relation with the circulating power within the microresonator. By modulating the relative phase between the two pump waves, we can control the generated standing waves movements and characterize the resonator with the SWIR camera. The visualized standing wave enables subwavelength distance measurements of scattering targets with nanometer-level accuracy. This work opens new avenues for applications in on-chip near-field (bio-)sensing, real time characterization of photonic integrated circuits and backscattering control in telecom systems.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Femtosecond pulse amplification on a chip
Authors:
Mahmoud A. Gaafar,
Markus Ludwig,
Kai Wang,
Thibault Wildi,
Thibault Voumard,
Milan Sinobad,
Jan Lorenzen,
Henry Francis,
Shuangyou Zhang,
Toby Bi,
Pascal DeľHaye,
Michael Geiselmann,
Neetesh Singh,
Franz X. Kärtner,
Sonia M. Garcia-Blanco,
Tobias Herr
Abstract:
Femtosecond laser pulses enable the synthesis of light across the electromagnetic spectrum and provide access to ultrafast phenomena in physics, biology, and chemistry. Chip-integration of femtosecond technology could revolutionize applications such as point-of-care diagnostics, biomedical imaging, portable chemical sensing, or autonomous navigation. However, current sources lack the required powe…
▽ More
Femtosecond laser pulses enable the synthesis of light across the electromagnetic spectrum and provide access to ultrafast phenomena in physics, biology, and chemistry. Chip-integration of femtosecond technology could revolutionize applications such as point-of-care diagnostics, biomedical imaging, portable chemical sensing, or autonomous navigation. However, current sources lack the required power, and the on-chip amplification of femtosecond pulses is an unresolved challenge. Here, addressing this challenge, we report >50-fold amplification of 1 GHz-repetition-rate chirped femtosecond pulses in a CMOS-compatible photonic chip to 800 W peak power with 116 fs pulse duration. Nonlinear effects, usually a hallmark of integrated photonics but prohibitive to pulse amplification are mitigated through all-normal dispersion, large mode-area rare-earth-doped gain waveguides. These results offer a pathway to chip-integrated femtosecond technology with power-levels characteristic of table-top sources.
△ Less
Submitted 8 November, 2023;
originally announced November 2023.
-
Machine Learning Assisted Inverse Design of Microresonators
Authors:
Arghadeep Pal,
Alekhya Ghosh,
Shuangyou Zhang,
Toby Bi,
Pascal DeľHaye
Abstract:
The high demand for fabricating microresonators with desired optical properties has led to various techniques to optimize geometries, mode structures, nonlinearities and dispersion. Depending on applications, the dispersion in such resonators counters their optical nonlinearities and influences the intracavity optical dynamics. In this paper, we demonstrate the use of a machine learning (ML) algor…
▽ More
The high demand for fabricating microresonators with desired optical properties has led to various techniques to optimize geometries, mode structures, nonlinearities and dispersion. Depending on applications, the dispersion in such resonators counters their optical nonlinearities and influences the intracavity optical dynamics. In this paper, we demonstrate the use of a machine learning (ML) algorithm as a tool to determine the geometry of microresonators from their dispersion profiles. The training dataset with ~460 samples is generated by finite element simulations and the model is experimentally verified using integrated silicon nitride microresonators. Two ML algorithms are compared along with suitable hyperparameter tuning, out of which Random Forest (RF) yields the best results. The average error on the simulated data is well below 15%.
△ Less
Submitted 10 November, 2022;
originally announced December 2022.
-
Step-Change in Friction under Electrovibration
Authors:
Idil Ozdamar,
M. Reza Alipour,
Benoit P. Delhaye,
Philippe Lef`evre,
Cagatay Basdogan
Abstract:
Rendering tactile effects on a touch screen via electrovibration has many potential applications. However, our knowledge on tactile perception of change in friction and the underlying contact mechanics are both very limited. In this study, we investigate the tactile perception and the contact mechanics for a step change in friction under electrovibration during a relative sliding between finger an…
▽ More
Rendering tactile effects on a touch screen via electrovibration has many potential applications. However, our knowledge on tactile perception of change in friction and the underlying contact mechanics are both very limited. In this study, we investigate the tactile perception and the contact mechanics for a step change in friction under electrovibration during a relative sliding between finger and the surface of a capacitive touchscreen. First, we conduct magnitude estimation experiments to investigate the role of normal force and sliding velocity on the perceived tactile intensity for a step increase and decrease in friction, called as rising friction (RF) and falling friction (FF). To investigate the contact mechanics involved in RF and FF, we then measure the frictional force, the apparent contact area, and the strains acting on the fingerpad during sliding at a constant velocity under three different normal loads using a custom-made experimental set-up. The results show that the participants perceived RF stronger than FF, and both the normal force and sliding velocity significantly influenced their perception. These results are supported by our mechanical measurements; the relative change in friction, the apparent contact area, and the strain in the sliding direction were all higher for RF than those for FF, especially for low normal forces. Taken together, our results suggest that different contact mechanics take place during RF and FF due to the viscoelastic behavior of fingerpad skin, and those differences influence our tactile perception of a step change in friction.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Spectral Extension and Synchronisation of Microcombs in a Single Microresonator
Authors:
Shuangyou Zhang,
Jonathan Silver,
Pascal DelHaye
Abstract:
We demonstrate that the optical spectrum of a soliton microcomb generated in a microresonator can be coherently extended by using bichromatic pum**: one pump with a frequency in the anomalous dispersion regime of the microresonator is used to generate a bright soliton microcomb while a second pump in the normal dispersion regime both compensates the thermal effect of the microresonator and gener…
▽ More
We demonstrate that the optical spectrum of a soliton microcomb generated in a microresonator can be coherently extended by using bichromatic pum**: one pump with a frequency in the anomalous dispersion regime of the microresonator is used to generate a bright soliton microcomb while a second pump in the normal dispersion regime both compensates the thermal effect of the microresonator and generates a second frequency comb via cross-phase modulation with the bright soliton, thus extending the spectrum of the microcomb. Experimental results for different microresonators show that the mode spacings of the two combs are synchronised, even when the combs are generated in different mode families. Numerical simulations agree well with experimental results and reveal that a bright optical pulse from the second pump is passively formed in the normal dispersion regime and trapped by the bright soliton. We believe the demonstrated technique provides an alternative way to generate broadband microcombs and multi-coloured frequency combs that can be useful for frequency metrology and spectroscopy. In addition, this method enables the selective enhancement of available optical power in specific parts of the comb spectrum.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Observation of Brillouin optomechanical strong coupling with an 11 GHz mechanical mode
Authors:
G. Enzian,
M. Szczykulska,
J. Silver,
L. Del Bino,
S. Zhang,
I. A. Walmsley,
P. DelHaye,
M. R. Vanner
Abstract:
Achieving cavity-optomechanical strong coupling with high-frequency phonons provides a rich avenue for quantum technology development including quantum state-transfer, memory, and transduction, as well as enabling several fundamental studies of macroscopic phononic degrees-of-freedom. Reaching such coupling with GHz mechanical modes however has proved challenging, with a prominent hindrance being…
▽ More
Achieving cavity-optomechanical strong coupling with high-frequency phonons provides a rich avenue for quantum technology development including quantum state-transfer, memory, and transduction, as well as enabling several fundamental studies of macroscopic phononic degrees-of-freedom. Reaching such coupling with GHz mechanical modes however has proved challenging, with a prominent hindrance being material- and surface-induced-optical absorption in many materials. Here, we circumvent these challenges and report the observation of optomechanical strong coupling to a high frequency (11 GHz) mechanical mode of a fused-silica whispering-gallery microresonator via the electrostrictive Brillouin interaction. Using an optical heterodyne detection scheme, the anti-Stokes light backscattered from the resonator is measured and normal-mode splitting and an avoided crossing are observed in the recorded spectra, providing unambiguous signatures of strong coupling. The optomechanical coupling rate reaches values as high as $G/2π= 39 \ \text{MHz}$ through the use of an auxiliary pump resonance, where the coupling dominates both the optical ($κ/2π= 3 \ \text{MHz}$) and the mechanical ($γ_\text{m}/2π= 21 \ \text{MHz}$) amplitude decay rates. Our findings provide a promising new approach for optical quantum control using light and sound.
△ Less
Submitted 22 January, 2019; v1 submitted 21 August, 2018;
originally announced August 2018.
-
A microresonator frequency comb optical clock
Authors:
Scott B. Papp,
Katja Beha,
Pascal DelHaye,
Franklyn Quinlan,
Hansuek Lee,
Kerry J. Vahala,
Scott A. Diddams
Abstract:
Optical-frequency combs enable measurement precision at the 20th digit, and accuracy entirely commensurate with their reference oscillator. A new direction in experiments is the creation of ultracompact frequency combs by way of nonlinear parametric optics in microresonators. We refer to these as microcombs, and here we report a silicon-chip-based microcomb optical clock that phase-coherently conv…
▽ More
Optical-frequency combs enable measurement precision at the 20th digit, and accuracy entirely commensurate with their reference oscillator. A new direction in experiments is the creation of ultracompact frequency combs by way of nonlinear parametric optics in microresonators. We refer to these as microcombs, and here we report a silicon-chip-based microcomb optical clock that phase-coherently converts an optical-frequency reference to a microwave signal. A low-noise comb spectrum with 25 THz span is generated with a 2 mm diameter silica disk and broadening in nonlinear fiber. This spectrum is stabilized to rubidium frequency references separated by 3.5 THz by controlling two teeth 108 modes apart. The optical clocks output is the electronically countable 33 GHz microcomb line spacing, which features an absolute stability better than the rubidium transitions by the expected factor of 108. Our work demonstrates the comprehensive set of tools needed for interfacing microcombs to state-of-the-art optical clocks.
△ Less
Submitted 13 September, 2013;
originally announced September 2013.