Showing 1–32 of 32 results for author: Day, S

Kitaev Interactions Through an Extended Superexchange Pathway in the jeff = 1/2 Ru3+ Honeycomb Magnet, RuP3SiO11

Authors: Aly H. Abdeldaim, Hlynur Gretarsson, Sarah J. Day, M. Duc Le, Gavin B. G. Stenning, Pascal Manuel, Robin S. Perry, Alexander A. Tsirlin, Gøran J. Nilsen, Lucy Clark

Abstract: Magnetic materials are composed of the simple building blocks of magnetic moments on a crystal lattice that interact via short-range magnetic exchange interactions. Yet from these simple building blocks emerges a remarkable diversity of magnetic states. Some of these, such as ferromagnetism, are familiar in our everyday lives, while others reveal the deep quantum mechanical origins of magnetism. A… ▽ More Magnetic materials are composed of the simple building blocks of magnetic moments on a crystal lattice that interact via short-range magnetic exchange interactions. Yet from these simple building blocks emerges a remarkable diversity of magnetic states. Some of these, such as ferromagnetism, are familiar in our everyday lives, while others reveal the deep quantum mechanical origins of magnetism. A prime example of the latter are quantum spin liquid (QSL) states in which -- unlike in a ferromagnet where magnetic moments are driven by their exchange interactions to adopt long-range order -- magnetic moments remain disordered at low temperatures but are simultaneously correlated over long length scales through quantum entanglement. A particularly promising theoretical model of a QSL is the Kitaev model, composed of unusual bond-dependent exchange interactions between magnetic moments on a honeycomb lattice. However, the Kitaev QSL is extremely challenging to realise experimentally as it is unstable to competing exchange interactions and crystal lattice perturbations that inevitably arise in real materials. This makes it essential to understand the relationship between the structure and interactions that may give rise to Kitaev interactions in new candidate materials. Here we show that the material requirements for the Kitaev QSL survive for an extended pseudo-edge-sharing superexchange pathway of Ru3+ 4d5 octahedra within the honeycomb layers of the inorganic framework solid, RuP3SiO11. Through materials synthesis and structural characterisation, resonant inelastic X-ray and neutron scattering experiments, we confirm the requisite jeff = 1/2 state of Ru3+ in RuP3SiO11 and resolve the hierarchy of exchange interactions that provide experimental access to an otherwise unexplored region of the extended Kitaev phase diagram. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: 38 Pages, 5 figures, 7 supporting information figures

Choose Your Own Adventure: Interactive E-Books to Improve Word Knowledge and Comprehension Skills

Authors: Stephanie Day, ** K. Hwang, Tracy Arner, Danielle McNamara, Carol Connor

Abstract: The purpose of this feasibility study was to examine the potential impact of reading digital interactive e-books on essential skills that support reading comprehension with third-fifth grade students. Students read two e-Books that taught word learning and comprehension monitoring strategies in the service of learning difficult vocabulary and targeted science concepts about hurricanes. We investig… ▽ More The purpose of this feasibility study was to examine the potential impact of reading digital interactive e-books on essential skills that support reading comprehension with third-fifth grade students. Students read two e-Books that taught word learning and comprehension monitoring strategies in the service of learning difficult vocabulary and targeted science concepts about hurricanes. We investigated whether specific comprehension strategies including word learning and strategies that supported general reading comprehension, summarization, and question generation, show promise of effectiveness in building vocabulary knowledge and comprehension skills in the e-Books. Students were assigned to read one of three versions of each of the e-Books, each version implemented one strategy. The books employed a choose-your-adventure format with embedded comprehension questions that provided students with immediate feedback on their responses. Paired samples t-tests were run to examine pre-to-post differences in learning the targeted vocabulary and science concepts taught in both e-Books. For both e-Books, students demonstrated significant gains in word learning and on the targeted hurricane concepts. Additionally, Hierarchical Linear Modeling (HLM) revealed that no one strategy was more associated with larger gains than the other. Performance on the embedded questions in the books was also associated with greater posttest outcomes for both e-Books. This work discusses important considerations for implementation and future development of e-books that can enhance student engagement and improve reading comprehension. △ Less

Submitted 4 March, 2024; originally announced March 2024.

A review and outlook on anionic and cationic redox in Ni-, Li- and Mn-rich layered oxides LiMeO2 (Me = Li, Ni, Co, Mn)

Authors: Bixian Ying, Zhenjie Teng, Sarah Day, Dan Porter, Martin Winter, Adrian Jonas, Katja Frenzel, Lena Mathies, Burkhard Beckhoff, Peter Nagel, Stefan Schuppler, Michael Merz, Felix Pfeiffer, Matthias Weiling, Masoud Baghernejad, Karin Kleiner

Abstract: The present work reviews the charge compensation in Ni based layered oxides (LiNi1-xMexO2 with x <= 0.2, Me = Co, Mn, space group R-3m) relating performance parameters to changes in the electronic and crystallographic structure of the cathode materials. Upon charge and discharge two fundamentally different redox mechanisms are observed: At low and medium states of charge (SOCs) charge compensation… ▽ More The present work reviews the charge compensation in Ni based layered oxides (LiNi1-xMexO2 with x <= 0.2, Me = Co, Mn, space group R-3m) relating performance parameters to changes in the electronic and crystallographic structure of the cathode materials. Upon charge and discharge two fundamentally different redox mechanisms are observed: At low and medium states of charge (SOCs) charge compensation takes mainly place at oxygen sites while electron density is shifted from the oxygen lattice to nickel (formation of sigma bonds). At high SOCs the shift of electron density from the transition metals to oxygen (formation of pi bonds) enables an additional redox process but also oxygen release from the transition metal host structure and subsequent detrimental reactions. Depending on the Ni:Co:Mn content, both processes lead to characteristic features in the voltage profile of the cathode materials and performance parameters like the capacity, the cycling stability and the open cell voltage become a function of the composition. △ Less

Submitted 2 January, 2024; v1 submitted 2 October, 2023; originally announced October 2023.

Direct numerical simulation of a high-pressure hydrogen micromix combustor: flame structure and stabilisation mechanism

Authors: Thomas L. Howarth, Mark A. Picciani, Edward S. Richardson, Marcus S. Day, Andrew J. Aspden

Abstract: A high-pressure hydrogen micromix combustor has been investigated using direct numerical simulation with detailed chemistry to examine the flame structure and stabilisation mechanism. The configuration of the combustor was based on the design by Schefer [1], using numerical periodicity to mimic a large square array. A precursor simulation of an opposed jet-in-crossflow was first conducted to gener… ▽ More A high-pressure hydrogen micromix combustor has been investigated using direct numerical simulation with detailed chemistry to examine the flame structure and stabilisation mechanism. The configuration of the combustor was based on the design by Schefer [1], using numerical periodicity to mimic a large square array. A precursor simulation of an opposed jet-in-crossflow was first conducted to generate appropriate partially-premixed inflow boundary conditions for the subsequent reacting simulation. The resulting flame can be described as a predominantly-lean inhomogeneously-premixed lifted jet flame. Five main zones were identified: a jet mixing region, a core flame, a peripheral flame, a recirculation zone, and combustion products. The core flame, situated over the jet mixing region, was found to burn as a thin reaction front, responsible for over 85% of the total fuel consumption. The peripheral flame shrouded the core flame, had low mean flow with high turbulence, and burned at very lean conditions (in the distributed burning regime). It was shown that turbulent premixed flame propagation was an order-of-magnitude too slow to stabilise the flame at these conditions. Stabilisation was identified to be due to ignition events resulting from turbulent mixing of fuel from the jet into mean recirculation of very lean hot products. Ignition events were found to correlate with shear-driven Kelvin-Helmholtz vortices, and increased in likelihood with streamwise distance. At the flame base, isolated events were observed, which developed into rapidly burning flame kernels that were blown downstream. Further downstream, near-simultaneous spatially-distributed ignition events were observed, which appeared more like ignition sheets. The paper concludes with a broader discussion that considers generalising from the conditions considered here. △ Less

Submitted 9 September, 2023; originally announced September 2023.

Stability and Fluctuations in Complex Ecological Systems

Authors: Eric Forgoston, Sarah Day, Peter C. de Ruiter, Arjen Doelman, Nienke Hartemink, Alan Hastings, Lia Hemerik, Alexandru Hening, Josef Hofbauer, Sonia Kefi, David A. Kessler, Toni Klauschies, Christian Kuehn, Xiaoxiao Li, John C. Moore, Elly Morrien, Anje-Margriet Neutel, Jelena Pantel, Sebastian J. Schreiber, Leah B. Shaw, Nadav Shnerb, Eric Siero, Laura S. Storch, Michael A. S. Thorne, Ingrid van de Leemput , et al. (2 additional authors not shown)

Abstract: From 08-12 August, 2022, 32 individuals participated in a workshop, Stability and Fluctuations in Complex Ecological Systems, at the Lorentz Center, located in Leiden, The Netherlands. An interdisciplinary dialogue between ecologists, mathematicians, and physicists provided a foundation of important problems to consider over the next 5-10 years. This paper outlines eight areas including (1) improv… ▽ More From 08-12 August, 2022, 32 individuals participated in a workshop, Stability and Fluctuations in Complex Ecological Systems, at the Lorentz Center, located in Leiden, The Netherlands. An interdisciplinary dialogue between ecologists, mathematicians, and physicists provided a foundation of important problems to consider over the next 5-10 years. This paper outlines eight areas including (1) improving our understanding of the effect of scale, both temporal and spatial, for both deterministic and stochastic problems; (2) clarifying the different terminologies and definitions used in different scientific fields; (3) develo** a comprehensive set of data analysis techniques arising from different fields but which can be used together to improve our understanding of existing data sets; (4) having theoreticians/computational scientists collaborate closely with empirical ecologists to determine what new data should be collected; (5) improving our knowledge of how to protect and/or restore ecosystems; (6) incorporating socio-economic effects into models of ecosystems; (7) improving our understanding of the role of deterministic and stochastic fluctuations; (8) studying the current state of biodiversity at the functional level, taxa level and genome level. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 22 pages

Readability Research: An Interdisciplinary Approach

Authors: Sofie Beier, Sam Berlow, Esat Boucaud, Zoya Bylinskii, Tianyuan Cai, Jenae Cohn, Kathy Crowley, Stephanie L. Day, Tilman Dingler, Jonathan Dobres, Jennifer Healey, Rajiv Jain, Marjorie Jordan, Bernard Kerr, Qisheng Li, Dave B. Miller, Susanne Nobles, Alexandra Papoutsaki, **g Qian, Tina Rezvanian, Shelley Rodrigo, Ben D. Sawyer, Shannon M. Sheppard, Bram Stein, Rick Treitman , et al. (3 additional authors not shown)

Abstract: Readability is on the cusp of a revolution. Fixed text is becoming fluid as a proliferation of digital reading devices rewrite what a document can do. As past constraints make way for more flexible opportunities, there is great need to understand how reading formats can be tuned to the situation and the individual. We aim to provide a firm foundation for readability research, a comprehensive frame… ▽ More Readability is on the cusp of a revolution. Fixed text is becoming fluid as a proliferation of digital reading devices rewrite what a document can do. As past constraints make way for more flexible opportunities, there is great need to understand how reading formats can be tuned to the situation and the individual. We aim to provide a firm foundation for readability research, a comprehensive framework for modern, multi-disciplinary readability research. Readability refers to aspects of visual information design which impact information flow from the page to the reader. Readability can be enhanced by changes to the set of typographical characteristics of a text. These aspects can be modified on-demand, instantly improving the ease with which a reader can process and derive meaning from text. We call on a multi-disciplinary research community to take up these challenges to elevate reading outcomes and provide the tools to do so effectively. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Comments: This paper was generated collaboratively over the course of a series of online workshops, the results of which were extensively edited by Dr. Zoya Bylinskii, Dr. Ben D. Sawyer, and Dr. Benjamin Wolfe. Original illustrations by Bernard Kerr. Corresponding Author: Dr. Ben D. Sawyer

A Multi-parameter Persistence Framework for Mathematical Morphology

Authors: Yu-Min Chung, Sarah Day, Chuan-Shen Hu

Abstract: The field of mathematical morphology offers well-studied techniques for image processing. In this work, we view morphological operations through the lens of persistent homology, a tool at the heart of the field of topological data analysis. We demonstrate that morphological operations naturally form a multiparameter filtration and that persistent homology can then be used to extract information ab… ▽ More The field of mathematical morphology offers well-studied techniques for image processing. In this work, we view morphological operations through the lens of persistent homology, a tool at the heart of the field of topological data analysis. We demonstrate that morphological operations naturally form a multiparameter filtration and that persistent homology can then be used to extract information about both topology and geometry in the images as well as to automate methods for optimizing the study and rendering of structure in images. For illustration, we apply this framework to analyze noisy binary, grayscale, and color images. △ Less

Submitted 24 March, 2021; originally announced March 2021.

On the microscopic origin of reversible and irreversible reactions of LiNixCoyMnx cathode materials: Ni-O hybrid bond formation vs. cationic and anionic redox

Authors: Karin Kleiner, Claire A. Murray, Cristina Grosu, Sarah J. Day, Martin Winter, Peter Nagel, Stefan Schuppler, Michael Merz

Abstract: Energy density limitations of layered oxides with different Ni contents, i.e., of the conventional cathode materials in Li-ion batteries, are investigated across the first discharge cycle using advanced spectroscopy and state-of-the-art diffraction. For the first time unambiguous experimental evidence is provided, that redox reactions in NCMs proceed via a reversible oxidation of Ni and a hybridiz… ▽ More Energy density limitations of layered oxides with different Ni contents, i.e., of the conventional cathode materials in Li-ion batteries, are investigated across the first discharge cycle using advanced spectroscopy and state-of-the-art diffraction. For the first time unambiguous experimental evidence is provided, that redox reactions in NCMs proceed via a reversible oxidation of Ni and a hybridization with O, and not, as widely assumed, via pure cationic or more recently discussed, pure anionic redox processes. Once Ni-O hybrid states are formed, the sites cannot be further oxidized. Instead, irreversible reactions set in which lead to a structural collapse and thus, the lack of ionic Ni limits the reversible capacity. Moreover, the degree of hybridization, which varies with the Ni content, triggers the electronic structure and the operation potential of the cathodes. With an increasing amount of Ni, the covalent character of the materials increases and the potential decreases. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Towards the prediction of critical transitions in spatially extended populations with cubical homology

Authors: Laura S. Storch, Sarah L. Day

Abstract: The prediction of critical transitions, such as extinction events, is vitally important to preserving vulnerable populations in the face of a rapidly changing climate and continuously increasing human resource usage. Predicting such events in spatially distributed populations is challenging because of the high dimensionality of the system and the complexity of the system dynamics. Here, we reduce… ▽ More The prediction of critical transitions, such as extinction events, is vitally important to preserving vulnerable populations in the face of a rapidly changing climate and continuously increasing human resource usage. Predicting such events in spatially distributed populations is challenging because of the high dimensionality of the system and the complexity of the system dynamics. Here, we reduce the dimensionality of the problem by quantifying spatial patterns via Betti numbers ($β_0$ and $β_1$), which count particular topological features in a topological space. Spatial patterns representing regions occupied by the population are analyzed in a coupled patch population model with Ricker map growth and nearest-neighbors dispersal on a two-dimensional lattice. We illustrate how Betti numbers can be used to characterize spatial patterns by type, which in turn may be used to track spatiotemporal changes via Betti number time series and characterize asymptotic dynamics of the model parameter space. En route to a global extinction event, we find that the Betti number time series of a population exhibits characteristic changes. We hope these preliminary results will be used to aide in the prediction of critical transitions in spatially extended systems. Additional applications of this technique include analysis of spatial data (e.g., GIS) and model validation. △ Less

Submitted 2 December, 2019; originally announced December 2019.

Comments: Published in Contemporary Mathematics: Dynamical Systems and Random Processes, Volume 736, 2019

Journal ref: Contemporary Mathematics Volume 736, pages 31-48. 2019

Map** the structural transitions controlled by the trilinear coupling in Ca3-xSrxTi2O7

Authors: Marie Kratochvilova, Fei-Ting Huang, Maria-Teresa Fernandez Diaz, Milan Klicpera, Sarah J. Day, Stephen P. Thompson, Yoon-Seok Oh, Bin Gao, Sang-Wook Cheong, Je-Geun Park

Abstract: We present the results of the high-temperature neutron and x-ray diffraction experiments on the Ca3-xSrxTi2O7 (x = 0.5, 0.8, 0.85, 0.9) compounds. The ferro- to paraelectric transition in these hybrid improper ferroelectric materials arises from the so-called trilinear coupling. Depending on the Strontium content, various structures and phase transitions, different from theoretical predictions, em… ▽ More We present the results of the high-temperature neutron and x-ray diffraction experiments on the Ca3-xSrxTi2O7 (x = 0.5, 0.8, 0.85, 0.9) compounds. The ferro- to paraelectric transition in these hybrid improper ferroelectric materials arises from the so-called trilinear coupling. Depending on the Strontium content, various structures and phase transitions, different from theoretical predictions, emerge. The in-situ x-ray powder diffraction indicates a direct ferro- to paraelectric transition between the orthorhombic A21am and tetragonal undistorted I4/mmm phase for x < 0.6. We identified a reduction in the trilinear coupling robustness by increasing the Sr-do** level to lead to the emergence of the intermediate tetragonal P42/mnm phase and the gradual suppression of the orthorhombic phase. The observed character of the structure transitions and the Ca3-xSrxTi2O7 phase diagram are discussed in the framework of theoretical models of other related hybrid improper ferroelectric systems. △ Less

Submitted 4 June, 2019; originally announced June 2019.

Comments: 10 pages, 3 figures, 1 table

A spectral deferred correction strategy for low Mach number reacting flows subject to electric fields

Authors: Lucas Esclapez, Valentina Ricchiuti, John B. Bell, Marcus S. Day

Abstract: We propose an algorithm for low Mach number reacting flows subjected to electric field that includes the chemical production and transport of charged species. This work is an extension of a multi-implicit spectral deferred correction (MISDC) algorithm designed to advance the conservation equations in time at scales associated with advective transport. The fast and nontrivial interactions of electr… ▽ More We propose an algorithm for low Mach number reacting flows subjected to electric field that includes the chemical production and transport of charged species. This work is an extension of a multi-implicit spectral deferred correction (MISDC) algorithm designed to advance the conservation equations in time at scales associated with advective transport. The fast and nontrivial interactions of electrons with the electric field are treated implicitly using a Jacobian-Free Newton Krylov approach for which a preconditioning strategy is developed. Within the MISDC framework, this enables a close and stable coupling of diffusion, reactions and dielectric relaxation terms with advective transport and is shown to exhibit second-order convergence in space and time. The algorithm is then applied to a series of steady and unsteady problems to demonstrate its capability and stability. Although developed in a one-dimensional case, the algorithmic ingredients are carefully designed to be amenable to multidimensional applications. △ Less

Submitted 17 April, 2019; originally announced April 2019.

The Shutdown Problem: How Does a Blockchain System End?

Authors: Mark Stuart Day

Abstract: We define and examine the shutdown problem for blockchain systems: how to gracefully end the system's operation at the end of its useful life. A particular focus is those blockchain systems that hold archival data of long-lived interest. We outline what it means to achieve a successful shutdown, and compare those criteria to likely end-of-life conditions in a generic blockchain system. We conclude… ▽ More We define and examine the shutdown problem for blockchain systems: how to gracefully end the system's operation at the end of its useful life. A particular focus is those blockchain systems that hold archival data of long-lived interest. We outline what it means to achieve a successful shutdown, and compare those criteria to likely end-of-life conditions in a generic blockchain system. We conclude that the decentralized nature of blockchain systems makes shutdown difficult, particularly if the system uses an unstable consensus like the Nakamoto consensus of Bitcoin. Accordingly, we recommend against using blockchain with unstable consensus for any data whose value is likely to persist beyond the life of the blockchain system. For any such systems that are already in operation, we recommend considering a hard fork to implement stable consensus. Such consideration needs to happen well in advance of the system's end of life. △ Less

Submitted 19 February, 2019; originally announced February 2019.

High-Resolution Numerical Simulations of a Large-Scale Helium Plume Using Adaptive Mesh Refinement

Authors: Nicholas T. Wimer, Marcus S. Day, Caelan Lapointe, Amanda S. Makowiecki, Jeffrey F. Glusman, John W. Daily, Gregory B. Rieker, Peter E. Hamlington

Abstract: The physical characteristics and evolution of a large-scale helium plume are examined through a series of numerical simulations with increasing physical resolution using adaptive mesh refinement (AMR). The five simulations each model a 1~m diameter circular helium plume exiting into a (4~m)$^3$ domain, and differ solely with respect to the smallest scales resolved using the AMR, spanning resolutio… ▽ More The physical characteristics and evolution of a large-scale helium plume are examined through a series of numerical simulations with increasing physical resolution using adaptive mesh refinement (AMR). The five simulations each model a 1~m diameter circular helium plume exiting into a (4~m)$^3$ domain, and differ solely with respect to the smallest scales resolved using the AMR, spanning resolutions from 15.6~mm down to 0.976~mm. As the physical resolution becomes finer, the helium-air shear layer and subsequent Kelvin-Helmholtz instability are better resolved, leading to a shift in the observed plume structure and dynamics. In particular, a critical resolution is found between 3.91~mm and 1.95~mm, below which the mean statistics and frequency content of the plume are altered by the development of a Rayleigh-Taylor instability near the centerline in close proximity to the base of the plume. This shift corresponds to a plume "puffing" frequency that is slightly higher than would be predicted using empirical relationships developed for buoyant jets. Ultimately, the high-fidelity simulations performed here are intended as a new validation dataset for the development of subgrid-scale models used in large eddy simulations of real-world buoyancy-driven flows. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: 11 figures

Deep learning for presumed probability density function models

Authors: Marc T. Henry de Frahan, Shashank Yellapantula, Ryan King, Marc S. Day, Ray W. Grout

Abstract: In this work, we use ML techniques to develop presumed PDF models for large eddy simulations of reacting flows. The joint sub-filter PDF of mixture fraction and progress variable is modeled using various ML algorithms and commonly used analytical models. The ML algorithms evaluated in the work are representative of three major classes of ML techniques: traditional ensemble methods (random forests)… ▽ More In this work, we use ML techniques to develop presumed PDF models for large eddy simulations of reacting flows. The joint sub-filter PDF of mixture fraction and progress variable is modeled using various ML algorithms and commonly used analytical models. The ML algorithms evaluated in the work are representative of three major classes of ML techniques: traditional ensemble methods (random forests), deep learning (deep neural networks), and generative learning (variational autoencoders). The first two algorithms are supervised learning algorithms, and the third is an unsupervised learning algorithm. Data from direct numerical simulation of the low-swirl burner (Day et al. 2012) are used to develop training data for sub-filter PDF models. Models are evaluated on predictions of the sub-filter PDFs as well as predictions of the filtered reaction rate of the progress variable, computed through a convolution of the sub-filter PDF and the conditional means of the reaction rate. This a-priori modeling study demonstrates that deep learning models for presumed PDF modeling are three times more accurate than analytical beta-beta PDF models. These models are as accurate as random forest models while using five times fewer trainable parameters and being 25 times faster for inference. We illustrate how models generalize to other regions of the flow and develop criteria based on the Jensen-Shannon divergence to quantify the performance of a model on new data. △ Less

Submitted 8 July, 2019; v1 submitted 11 January, 2019; originally announced January 2019.

Recent advances in methodology for clinical trials in small populations: the InSPiRe project

Authors: T. Friede, M. Posch, S. Zohar, C. Alberti, N. Benda, E. Comets, S. Day, A. Dmitrenko, A. Graf, B. K. Günhan, S. W. Hee, F. Lentz, J. Madan, F. Miller, T. Ondra, M. Pearce, C. Röver, A. Tournazi, S. Unkel, M. Ursino, G. Wassmer, N. Stallard

Abstract: Where there are a limited number of patients, such as in a rare disease, clinical trials in these small populations present several challenges, including statistical issues. This led to an EU FP7 call for proposals in 2013. One of the three projects funded was the Innovative Methodology for Small Populations Research (InSPiRe) project. This paper summarizes the main results of the project, which w… ▽ More Where there are a limited number of patients, such as in a rare disease, clinical trials in these small populations present several challenges, including statistical issues. This led to an EU FP7 call for proposals in 2013. One of the three projects funded was the Innovative Methodology for Small Populations Research (InSPiRe) project. This paper summarizes the main results of the project, which was completed in 2017. The InSPiRe project has led to development of novel statistical methodology for clinical trials in small populations in four areas. We have explored new decision-making methods for small population clinical trials using a Bayesian decision-theoretic framework to compare costs with potential benefits, developed approaches for targeted treatment trials, enabling simultaneous identification of subgroups and confirmation of treatment effect for these patients, worked on early phase clinical trial design and on extrapolation from adult to pediatric studies, develo** methods to enable use of pharmacokinetics and pharmacodynamics data, and also developed improved robust meta-analysis methods for a small number of trials to support the planning, analysis and interpretation of a trial as well as enabling extrapolation between patient groups. In addition to scientific publications, we have contributed to regulatory guidance and produced free software in order to facilitate implementation of the novel methods. △ Less

Submitted 30 October, 2018; originally announced November 2018.

Comments: 9 pages, 3 figures

Journal ref: Orphanet Journal of Rare Diseases, 13:136, 2018

Towards the Distributed Burning Regime in Turbulent Premixed Flames

Authors: A. J. Aspden, M. S. Day, J. B. Bell

Abstract: Three-dimensional numerical simulations of canonical statistically-steady statistically-planar turbulent flames have been used in an attempt to produce distributed burning in lean methane and hydrogen flames. Dilatation across the flame means that extremely large Karlovitz numbers are required; even at the extreme levels of turbulence studied (up to a Karlovitz number of 8767) distributed burning… ▽ More Three-dimensional numerical simulations of canonical statistically-steady statistically-planar turbulent flames have been used in an attempt to produce distributed burning in lean methane and hydrogen flames. Dilatation across the flame means that extremely large Karlovitz numbers are required; even at the extreme levels of turbulence studied (up to a Karlovitz number of 8767) distributed burning was only achieved in the hydrogen case. In this case, turbulence was found to broaden the reaction zone visually by around an order of magnitude, and thermodiffusive effects (typically present for lean hydrogen flames) were not observed. In the preheat zone, the species compositions differ considerably from those of one-dimensional flames based a number of different transport models (mixture-averaged, unity Lewis number, and a turbulent eddy viscosity model). The behaviour is a characteristic of turbulence dominating non-unity Lewis number species transport, and the distinct limit is again attributed to dilatation and its effect on the turbulence. Peak local reaction rates are found to be lower in the distributed case than in the lower Karlovitz cases but higher than in the laminar flame, which is attributed to effects that arise from the modified fuel-temperature distribution that results from turbulent mixing dominating low Lewis number thermodiffusive effects. Finally, approaches to achieve distributed burning at realisable conditions are discussed; factors that increase the likelihood of realising distributed burning are higher pressure, lower equivalence ratio, higher Lewis number, and lower reactant temperature. △ Less

Submitted 12 April, 2019; v1 submitted 26 June, 2018; originally announced June 2018.

Journal ref: J. Fluid Mech. 871 (2019) 1-21

Properties of CO$_2$ clathrate hydrates formed in the presence of MgSO$_4$ solutions with implications for icy moons

Authors: E. Safi, Stephen P. Thompson, Aneurin Evans, Sarah J. Day, C. A. Murray, J. E. Parker, A. R. Baker, J. M. Oliveira, J. Th. van Loon

Abstract: There is evidence to suggest that clathrate hydrates have a significant effect on the surface geology of icy bodies in the Solar System. However the aqueous environments believed to be present on these bodies are likely to be saline rather than pure water. Laboratory work to underpin the properties of clathrates in such environments is lacking. We fill this gap by carrying out a laboratory investi… ▽ More There is evidence to suggest that clathrate hydrates have a significant effect on the surface geology of icy bodies in the Solar System. However the aqueous environments believed to be present on these bodies are likely to be saline rather than pure water. Laboratory work to underpin the properties of clathrates in such environments is lacking. We fill this gap by carrying out a laboratory investigation of the physical properties of CO$_2$ clathrates produced in weak aqueous solutions of MgSO$_4$. We use synchrotron X-ray powder diffraction to investigate clathrates formed at high CO$_2$ pressure in ice that has formed from aqueous solutions of MgSO$_4$. We measure the thermal expansion, density and dissociation properties of the clathrates under temperature conditions similar to those on icy Solar System bodies. We find that the sulphate solution inhibits the formation of clathrates by lowering their dissociation temperatures. Hysteresis is found in the thermal expansion coefficients as clathrates are cooled and heated; we attribute this to the presence of the salt in solution. The density derived from X-ray powder diffraction is temperature and pressure dependent. When comparing the density of CO$_2$ clathrates to that of the solution in which they formed, we conclude that they sink in the oceans in which they form. We also find that the polymorph of ice present at low temperatures is Ih rather than Ic, which we attribute to the presence of the MgSO$_4$. We 1) conclude that the clathrate density has implications for their behaviour in satellite oceans as their sinking and floating capabilities are temperature and pressure dependent, 2) conclude that the presence of MgSO$_4$ inhibits the formation of clathrates and in some cases may even affect their structure and 3) report the dominance of Ih throughout the experimental procedure despite Ic being the stable phase at low temperature. △ Less

Submitted 26 January, 2017; originally announced January 2017.

Comments: Accepted for publication by Astronomy and Astrophysics on 25 January 2017. Abstract truncated

Iterative importance sampling algorithms for parameter estimation

Authors: Matthias Morzfeld, Marcus S. Day, Ray W. Grout, George Shu Heng Pau, Stefan A. Finsterle, John B. Bell

Abstract: In parameter estimation problems one computes a posterior distribution over uncertain parameters defined jointly by a prior distribution, a model, and noisy data. Markov Chain Monte Carlo (MCMC) is often used for the numerical solution of such problems. An alternative to MCMC is importance sampling, which can exhibit near perfect scaling with the number of cores on high performance computing syste… ▽ More In parameter estimation problems one computes a posterior distribution over uncertain parameters defined jointly by a prior distribution, a model, and noisy data. Markov Chain Monte Carlo (MCMC) is often used for the numerical solution of such problems. An alternative to MCMC is importance sampling, which can exhibit near perfect scaling with the number of cores on high performance computing systems because samples are drawn independently. However, finding a suitable proposal distribution is a challenging task. Several sampling algorithms have been proposed over the past years that take an iterative approach to constructing a proposal distribution. We investigate the applicability of such algorithms by applying them to two realistic and challenging test problems, one in subsurface flow, and one in combustion modeling. More specifically, we implement importance sampling algorithms that iterate over the mean and covariance matrix of Gaussian or multivariate t-proposal distributions. Our implementation leverages massively parallel computers, and we present strategies to initialize the iterations using "coarse" MCMC runs or Gaussian mixture models. △ Less

Submitted 14 November, 2017; v1 submitted 5 August, 2016; originally announced August 2016.

Sphere-valued harmonic maps with surface energy and the $K_{13}$ problem

Authors: Stuart Day, Arghir Dani Zarnescu

Abstract: We consider an energy functional motivated by the celebrated $K_{13}$ problem in the Oseen-Frank theory of nematic liquid crystals. It is defined for sphere-valued functions and appears as the usual Dirichlet energy with an additional surface term. It is known that this energy is unbounded from below and our aim has been to study the local minimizers. We show that even having a critical point in… ▽ More We consider an energy functional motivated by the celebrated $K_{13}$ problem in the Oseen-Frank theory of nematic liquid crystals. It is defined for sphere-valued functions and appears as the usual Dirichlet energy with an additional surface term. It is known that this energy is unbounded from below and our aim has been to study the local minimizers. We show that even having a critical point in a suitable energy space imposes severe restrictions on the boundary conditions. Having suitable boundary conditions makes the energy functional bounded and in this case we study the partial regularity of the minimizers. △ Less

Submitted 5 July, 2016; originally announced July 2016.

MSC Class: 76A15; 58E20; 49N60

In situ apparatus for the study of clathrate hydrates relevant to solar system bodies using synchrotron X-ray diffraction and Raman spectroscopy

Authors: Sarah J. Day, Stephen P. Thompson, Aneurin Evans, Julia E. Parker

Abstract: Clathrate hydrates are believed to play a significant role in various solar system environments, e.g. comets, and the surfaces and interiors of icy satellites, however the structural factors governing their formation and dissociation are poorly understood. We demonstrate the use of a high pressure gas cell, combined with variable temperature cooling and time-resolved data collection, to the in sit… ▽ More Clathrate hydrates are believed to play a significant role in various solar system environments, e.g. comets, and the surfaces and interiors of icy satellites, however the structural factors governing their formation and dissociation are poorly understood. We demonstrate the use of a high pressure gas cell, combined with variable temperature cooling and time-resolved data collection, to the in situ study of clathrate hydrates under conditions relevant to solar system environments. Clathrates formed and processed within the cell are monitored in situ using synchrotron X-ray powder diffraction and Raman spectroscopy. X-ray diffraction allows the formation of clathrate hydrates to be observed as CO2 gas is applied to ice formed within the cell. Complete conversion is obtained by annealing at temperatures just below the ice melting point. A subsequent rise in the quantity of clathrate is observed as the cell is thermally cycled. Four regions between 100-5000cm-1 are present in the Raman spectra that carry features characteristic of both ice and clathrate formation. This novel experimental arrangement is well suited to studying clathrate hydrates over a range of temperature (80-500K) and pressure (1-100bar) conditions and can be used with a variety of different gases and starting aqueous compositions. We propose the increase in clathrate formation observed during thermal cycling may be due to the formation of a quasi liquid-like phase that forms at temperatures below the ice melting point, but which allows easier formation of new clathrate cages, or the retention and delocalisation of previously formed clathrate structures, possibly as amorphous clathrate. The structural similarities between hexagonal ice, the quasi liquid-like phase, and crystalline CO2 hydrate mean that differences in the Raman spectrum are subtle; however, all features out to 5000cm-1 are diagnostic of clathrate structure. △ Less

Submitted 13 January, 2015; originally announced January 2015.

Comments: Astronomy & Astrophysics, in press. 6 pages

Journal ref: A&A 574, A91 (2015)

Photoluminescence in amorphous MgSiO_3 silicate

Authors: S. P. Thompson, J. E. Parker, S. J. Day, L. D. Connor, A. Evans

Abstract: Samples of amorphous MgSiO_3 annealed at temperature steps leading up to their crystallisation temperature show a rise in photoluminescence activity, peaking at ~450C. The photoluminescence band has a main peak at 595nm and a weaker peak at 624nm. We present laboratory data to show that the maximum in photoluminescence activity is related to substantial structural reordering that occurs within a r… ▽ More Samples of amorphous MgSiO_3 annealed at temperature steps leading up to their crystallisation temperature show a rise in photoluminescence activity, peaking at ~450C. The photoluminescence band has a main peak at 595nm and a weaker peak at 624nm. We present laboratory data to show that the maximum in photoluminescence activity is related to substantial structural reordering that occurs within a relatively narrow temperature range. We attribute the origin of the photoluminescence to non-bridging oxygen hole centre defects, which form around ordered nano-sized domain structures as a result of the breakup of tetrahedral connectivity in the disordered inter-domain network, aided by the loss of bonded OH. These defects are removed as crystallisation progresses, resulting in the decrease and eventual loss of photoluminescence. Thermally processed hydrogenated amorphous silicate grains could therefore represent a potential carrier of extended red emission. △ Less

Submitted 2 July, 2013; originally announced July 2013.

Comments: 12 pages, 12 figs. Accepted for publication in MNRAS

Non-aqueous formation of the calcium carbonate polymorph vaterite: astrophysical implications

Authors: Sarah J. Day, Stephen P. Thompson, Julia E. Parker, Aneurin Evans

Abstract: We study the formation of calcium carbonate, through the solid-gas interaction of amorphous Ca-silicate with gaseous CO2, at elevated pressures, and link this to the possible presence of calcium carbonate in a number of circumstellar and planetary environments. We use in-situ synchrotron X-Ray powder diffraction to obtain detailed structural data pertaining to the formation of the crystalline calc… ▽ More We study the formation of calcium carbonate, through the solid-gas interaction of amorphous Ca-silicate with gaseous CO2, at elevated pressures, and link this to the possible presence of calcium carbonate in a number of circumstellar and planetary environments. We use in-situ synchrotron X-Ray powder diffraction to obtain detailed structural data pertaining to the formation of the crystalline calcium carbonate phase vaterite and its evolution with temperature. We found that the metastable calcium carbonate phase vaterite was formed alongside calcite, at elevated CO2 pressure, at room temperature and subsequently remained stable over a large range of temperature and pressure. We report the formation of the calcium carbonate mineral vaterite whilst attempting to simulate carbonate dust grain formation in astrophysical environments. This suggests that vaterite could be a mineral component of carbonate dust and also presents a possible method of formation for vaterite and its polymorphs on planetary surfaces. △ Less

Submitted 15 March, 2013; originally announced March 2013.

Comments: Astronomy and Astrophysics, in press

Carbonate Formation in Non-Aqueous Environments by Solid-Gas Carbonation of Silicates

Authors: S. J. Day, S. P. Thompson, A. Evans, J. E. Parker

Abstract: We have produced synthetic analogues of cosmic silicates using the Sol Gel method, producing amorphous silicates of composition Mg(x)Ca(1-x)SiO3. Using synchrotron X-ray powder diffraction on Beamline I11 at the Diamond Light Source, together with a newly-commissioned gas cell, real-time powder diffraction scans have been taken of a range of silicates exposed to CO2 under non-ambient conditions. T… ▽ More We have produced synthetic analogues of cosmic silicates using the Sol Gel method, producing amorphous silicates of composition Mg(x)Ca(1-x)SiO3. Using synchrotron X-ray powder diffraction on Beamline I11 at the Diamond Light Source, together with a newly-commissioned gas cell, real-time powder diffraction scans have been taken of a range of silicates exposed to CO2 under non-ambient conditions. The SXPD is complemented by other techniques including Raman and Infrared Spectroscopy and SEM imaging. △ Less

Submitted 10 December, 2012; originally announced December 2012.

Comments: 5 pages, 3 figures. Contribution to the Proceedings of the First European Conference on Laboratory Astrophysics (ECLA)

CASTRO: A New Compressible Astrophysical Solver. I. Hydrodynamics and Self-Gravity

Authors: A. S. Almgren, V. E. Beckner, J. B. Bell, M. S. Day, L. H. Howell, C. C. Joggerst, M. J. Lijewski, A. Nonaka, M. Singer, M. Zingale

Abstract: We present a new code, CASTRO, that solves the multicomponent compressible hydrodynamic equations for astrophysical flows including self-gravity, nuclear reactions and radiation. CASTRO uses an Eulerian grid and incorporates adaptive mesh refinement (AMR). Our approach to AMR uses a nested hierarchy of logically-rectangular grids with simultaneous refinement in both space and time. The radiation… ▽ More We present a new code, CASTRO, that solves the multicomponent compressible hydrodynamic equations for astrophysical flows including self-gravity, nuclear reactions and radiation. CASTRO uses an Eulerian grid and incorporates adaptive mesh refinement (AMR). Our approach to AMR uses a nested hierarchy of logically-rectangular grids with simultaneous refinement in both space and time. The radiation component of CASTRO will be described in detail in the next paper, Part II, of this series. △ Less

Submitted 1 May, 2010; originally announced May 2010.

Comments: accepted to Astrophysical Journal Suppliment (http://iop.org), 52 pages, 16 figures

Turbulence-Flame Interactions in Type Ia Supernovae

Authors: A. J. Aspden, J. B. Bell, M. S. Day, S. E. Woosley, M. Zingale

Abstract: The large range of time and length scales involved in type Ia supernovae (SN Ia) requires the use of flame models. As a prelude to exploring various options for flame models, we consider, in this paper, high-resolution three-dimensional simulations of the small-scale dynamics of nuclear flames in the supernova environment in which the details of the flame structure are fully resolved. The range… ▽ More The large range of time and length scales involved in type Ia supernovae (SN Ia) requires the use of flame models. As a prelude to exploring various options for flame models, we consider, in this paper, high-resolution three-dimensional simulations of the small-scale dynamics of nuclear flames in the supernova environment in which the details of the flame structure are fully resolved. The range of densities examined, 1 to $8 \times 10^7$ g cm$^{-3}$, spans the transition from the laminar flamelet regime to the distributed burning regime where small scale turbulence disrupts the flame. The use of a low Mach number algorithm facilitates the accurate resolution of the thermal structure of the flame and the inviscid turbulent kinetic energy cascade, while implicitly incorporating kinetic energy dissipation at the grid-scale cutoff. For an assumed background of isotropic Kolmogorov turbulence with an energy characteristic of SN Ia, we find a transition density between 1 and $3 \times 10^7$ g cm$^{-3}$ where the nature of the burning changes qualitatively. By $1 \times 10^7$ g cm$^{-3}$, energy diffusion by conduction and radiation is exceeded, on the flame scale, by turbulent advection. As a result, the effective Lewis Number approaches unity. That is, the flame resembles a laminar flame, but is turbulently broadened with an effective diffusion coefficient, $D_T \sim u' l$, where $u'$ is the turbulent intensity and $l$ is the integral scale. For the larger integral scales characteristic of a real supernova, the flame structure is predicted to become complex and unsteady. Implications for a possible transition to detonation are discussed. △ Less

Submitted 17 November, 2008; originally announced November 2008.

Comments: 32 pages, 14 figures. Some figures degraded for size. See seesar.lbl.gov (or ApJ) for full quality. To be published in ApJ December 2008

New Approaches for Modeling Type Ia Supernovae

Authors: M. Zingale, A. S. Almgren, J. B. Bell, M. S. Day, C. A. Rendleman, S. E. Woosley

Abstract: Type Ia supernovae (SNe Ia) are the largest thermonuclear explosions in the Universe. Their light output can be seen across great distances and has led to the discovery that the expansion rate of the Universe is accelerating. Despite the significance of SNe Ia, there are still a large number of uncertainties in current theoretical models. Computational modeling offers the promise to help answer… ▽ More Type Ia supernovae (SNe Ia) are the largest thermonuclear explosions in the Universe. Their light output can be seen across great distances and has led to the discovery that the expansion rate of the Universe is accelerating. Despite the significance of SNe Ia, there are still a large number of uncertainties in current theoretical models. Computational modeling offers the promise to help answer the outstanding questions. However, even with today's supercomputers, such calculations are extremely challenging because of the wide range of length and time scales. In this paper, we discuss several new algorithms for simulations of SNe Ia and demonstrate some of their successes. △ Less

Submitted 28 June, 2006; originally announced June 2006.

Comments: 8 pages, to appear in Proceedings of SciDAC 2006, published by IOP press (http://www.iop.org)

Journal ref: J.Phys.Conf.Ser. 46 (2006) 385-392

The Physics of Flames in Type Ia Supernovae

Authors: M. Zingale, S. E. Woosley, J. B. Bell, M. S. Day, C. A. Rendleman

Abstract: We extend a low Mach number hydrodynamics method developed for terrestrial combustion, to the study of thermonuclear flames in Type Ia supernovae. We discuss the differences between 2-D and 3-D Rayleigh-Taylor unstable flame simulations, and give detailed diagnostics on the turbulence, showing that the kinetic energy power spectrum obeys Bolgiano-Obukhov statistics in 2-D, but Kolmogorov statist… ▽ More We extend a low Mach number hydrodynamics method developed for terrestrial combustion, to the study of thermonuclear flames in Type Ia supernovae. We discuss the differences between 2-D and 3-D Rayleigh-Taylor unstable flame simulations, and give detailed diagnostics on the turbulence, showing that the kinetic energy power spectrum obeys Bolgiano-Obukhov statistics in 2-D, but Kolmogorov statistics in 3-D. Preliminary results from 3-D reacting bubble calculations are shown, and their implications for ignition are discussed. △ Less

Submitted 1 July, 2005; originally announced July 2005.

Comments: To appear in the Proceedings of the SciDAC 2005 meeting, IOP press (http://www.iop.org). Some figures degraded in quality to conserve space

Journal ref: J.Phys.Conf.Ser.16:405-409,2005

Three-dimensional Numerical Simulations of Rayleigh-Taylor Unstable Flames in Type Ia Supernovae

Authors: M. Zingale, S. E. Woosley, C. A. Rendleman, M. S. Day, J. B. Bell

Abstract: Flame instabilities play a dominant role in accelerating the burning front to a large fraction of the speed of sound in a Type Ia supernova. We present a three-dimensional numerical simulation of a Rayleigh-Taylor unstable carbon flame, following its evolution through the transition to turbulence. A low Mach number hydrodynamics method is used, freeing us from the harsh timestep restrictions imp… ▽ More Flame instabilities play a dominant role in accelerating the burning front to a large fraction of the speed of sound in a Type Ia supernova. We present a three-dimensional numerical simulation of a Rayleigh-Taylor unstable carbon flame, following its evolution through the transition to turbulence. A low Mach number hydrodynamics method is used, freeing us from the harsh timestep restrictions imposed by sound waves. We fully resolve the thermal structure of the flame and its reaction zone, eliminating the need for a flame model. A single density is considered, $1.5\times 10^7 \gcc$, and half carbon\slash half oxygen fuel--conditions under which the flame propagated in the flamelet regime in our related two-dimensional study. We compare to a corresponding two-dimensional simulation, and show that while fire-polishing keeps the small features suppressed in two dimensions, turbulence wrinkles the flame on far smaller scales in the three-dimensional case, suggesting that the transition to the distributed burning regime occurs at higher densities in three dimensions. Detailed turbulence diagnostics are provided. We show that the turbulence follows a Kolmogorov spectrum and is highly anisotropic on the large scales, with a much larger integral scale in the direction of gravity. Furthermore, we demonstrate that it becomes more isotropic as it cascades down to small scales. Based on the turbulent statistics and the flame properties of our simulation, we compute the Gibson scale. We show the progress of the turbulent flame through a classic combustion regime diagram, indicating that the flame just enters the distributed burning regime near the end of our simulation. △ Less

Submitted 3 June, 2005; v1 submitted 29 January, 2005; originally announced January 2005.

Comments: accepted to ApJ some figures degraded to conserve space

Journal ref: Astrophys.J. 632 (2005) 1021-1034

Direct Numerical Simulations of Type Ia Supernovae Flames II: The Rayleigh-Taylor Instability

Authors: J. B. Bell, M. S. Day, C. A. Rendleman, S. E. Woosley, M. Zingale

Abstract: A Type Ia supernova explosion likely begins as a nuclear runaway near the center of a carbon-oxygen white dwarf. The outward propagating flame is unstable to the Landau-Darrieus, Rayleigh-Taylor, and Kelvin-Helmholtz instabilities, which serve to accelerate it to a large fraction of the speed of sound. We investigate the Rayleigh-Taylor unstable flame at the transition from the flamelet regime t… ▽ More A Type Ia supernova explosion likely begins as a nuclear runaway near the center of a carbon-oxygen white dwarf. The outward propagating flame is unstable to the Landau-Darrieus, Rayleigh-Taylor, and Kelvin-Helmholtz instabilities, which serve to accelerate it to a large fraction of the speed of sound. We investigate the Rayleigh-Taylor unstable flame at the transition from the flamelet regime to the distributed-burning regime, around densities of $10^7$ g/cc, through detailed, fully resolved simulations. A low Mach number, adaptive mesh hydrodynamics code is used to achieve the necessary resolution and long time scales. As the density is varied, we see a fundamental change in the character of the burning--at the low end of the density range the Rayleigh-Taylor instability dominates the burning, whereas at the high end the burning suppresses the instability. In all cases, significant acceleration of the flame is observed, limited only by the size of the domain we are able to study. We discuss the implications of these results on the potential for a deflagration to detonation transition. △ Less

Submitted 13 January, 2004; originally announced January 2004.

Comments: submitted to ApJ, some figures degraded due to size constraints

Journal ref: Astrophys.J. 608 (2004) 883-906

Direct Numerical Simulations of Type Ia Supernovae Flames I: The Landau-Darrieus Instability

Authors: J. B. Bell, M. S. Day, C. A. Rendleman, S. E. Woosley, M. Zingale

Abstract: Planar flames are intrinsically unstable in open domains due to the thermal expansion across the burning front--the Landau-Darrieus instability. This instability leads to wrinkling and growth of the flame surface, and corresponding acceleration of the flame, until it is stabilized by cusp formation. We look at the Landau-Darrieus instability for C/O thermonuclear flames at conditions relevant to… ▽ More Planar flames are intrinsically unstable in open domains due to the thermal expansion across the burning front--the Landau-Darrieus instability. This instability leads to wrinkling and growth of the flame surface, and corresponding acceleration of the flame, until it is stabilized by cusp formation. We look at the Landau-Darrieus instability for C/O thermonuclear flames at conditions relevant to the late stages of a Type Ia supernova explosion. Two-dimensional direct numerical simulations of both single-mode and multi-mode perturbations using a low Mach number hydrodynamics code are presented. We show the effect of the instability on the flame speed as a function of both the density and domain size, demonstrate the existence of the small scale cutoff to the growth of the instability, and look for the proposed breakdown of the non-linear stabilization at low densities. The effects of curvature on the flame as quantified through measurements of the growth rate and computation of the corresponding Markstein number. While accelerations of a few percent are observed, they are too small to have any direct outcome on the supernova explosion. △ Less

Submitted 16 January, 2004; v1 submitted 24 November, 2003; originally announced November 2003.

Comments: accepted to ApJ. Figure 1 degraded for size constraints. replaced with accepted version (one new figure added)

Journal ref: Astrophys.J. 606 (2004) 1029-1038

Power Weakly Mixing Infinite Transformations

Authors: Sarah L. Day, Brian R. Grivna, Earle P. McCartney, Cesar E. Silva

Abstract: We construct a rank one infinite measure preserving transformation $T$ such that for all sequences of nonzero integers $\{k_{1},..., k_{r}\}$, $T^{k_{1}}\times...\times T^{k_{r}}$ is ergodic. We construct a rank one infinite measure preserving transformation $T$ such that for all sequences of nonzero integers $\{k_{1},..., k_{r}\}$, $T^{k_{1}}\times...\times T^{k_{r}}$ is ergodic. △ Less

Submitted 23 March, 1998; originally announced March 1998.

MSC Class: 28D

Journal ref: New York J. Math. 5 (1999) 17-24

Abundance Gradients in Cooling Flow Clusters: Ginga Lac & Einstein SSS Spectra of A496, A1795, A2142 & A2199

Authors: Raymond E. White III, C. S. R. Day, Isamu Hatsukade, John P. Hughes

Abstract: We analyze the Ginga LAC and Einstein SSS spectra of four cooling flow clusters, A496, A1795, A2142 and A2199, each of which shows firm evidence of a relatively cool component. The inclusion of such cool spectral components in joint fits of SSS and LAC data leads to somewhat higher global temperatures than are derived from the high energy LAC data alone. We find little evidence of cool emission… ▽ More We analyze the Ginga LAC and Einstein SSS spectra of four cooling flow clusters, A496, A1795, A2142 and A2199, each of which shows firm evidence of a relatively cool component. The inclusion of such cool spectral components in joint fits of SSS and LAC data leads to somewhat higher global temperatures than are derived from the high energy LAC data alone. We find little evidence of cool emission outside the SSS field of view. Metal abundances appear to be centrally enhanced in all four cluster, with varying degrees of model dependence and statistical significance: the evidence is statistically strongest for A496 and A2142, somewhat weaker for A2199 and weakest for A1795. We also explore the model-dependence in the amount of cold, X-ray absorbing matter discovered in these clusters by White et al. (1991). △ Less

Submitted 26 April, 1994; originally announced April 1994.

Comments: 27 pages Plain TeX, to appear in 1 Oct 94 ApJ (compressed tar file of 14 Postscript tables and figures available via anonymous ftp from directory /preprints/white at crux.astr.ua.edu), UA-94-REW-1