-
A Virtual Diffractometer For Creating Synthetic HEDM Images of Tessellated and Meshed Finite Element Polycrystals
Authors:
Paul R. Dawson,
Matthew P. Miller
Abstract:
To assist in the planning of in situ loading, HEDM experiments by generating synthetic diffraction images of virtual samples in loaded and unloaded states. The user designates a target grain in the virtual sample and specifies the set of reflections for which images are to be generated. The code generates several intermediate images, including: (1) the points of intersection between the diffracted…
▽ More
To assist in the planning of in situ loading, HEDM experiments by generating synthetic diffraction images of virtual samples in loaded and unloaded states. The user designates a target grain in the virtual sample and specifies the set of reflections for which images are to be generated. The code generates several intermediate images, including: (1) the points of intersection between the diffracted beam direction vector the detector plane; (2) reflection-dependent frequency distributions of the diffraction angle, $ω$; and (3) plots of the diffraction volume-weighted intensity distributions for the specified set of reflections. The final sets of plots are facsimiles of pixelated detector images which take into account characteristics of specific detectors, including its pixel size and point spread behavior.
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Using Discrete Harmonic Expansions and Equilibrium Conditions to Estimate Intragrain Stress Distributions in Polycrystals from Grain-Averaged Data
Authors:
Paul R. Dawson,
Matthew. P. Miller
Abstract:
The application of harmonic expansions to estimate intra-grain stress distributions from grain-averaged stress data is presented that extends the capabilities of the open source code, MechMonics. The method is based on using an optimization algorithm to determine the harmonic expansion weights that reduce the violation of equilibrium while maintaining prescribed grain-averages. The method is demon…
▽ More
The application of harmonic expansions to estimate intra-grain stress distributions from grain-averaged stress data is presented that extends the capabilities of the open source code, MechMonics. The method is based on using an optimization algorithm to determine the harmonic expansion weights that reduce the violation of equilibrium while maintaining prescribed grain-averages. The method is demonstrated using synthetic data generated for uniaxial extension of a virtual polycrystal with the mechMet code.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Mechanical Analyses using Discrete Harmonic Expansions of Grain-Based Field Data
Authors:
Paul R. Dawson,
Matthew P. Miller
Abstract:
A methodology for computing expansion basis functions using discrete harmonic modes is presented. The discrete harmonic modes are determined grain-by-grain for virtual polycrystals for which finite element meshes are available. The expansion weights associated with representing field variables over grain domains are determined by exploiting the orthogonality of the harmonic modes. The methodology…
▽ More
A methodology for computing expansion basis functions using discrete harmonic modes is presented. The discrete harmonic modes are determined grain-by-grain for virtual polycrystals for which finite element meshes are available. The expansion weights associated with representing field variables over grain domains are determined by exploiting the orthogonality of the harmonic modes. The methodology is demonstrated with the representation of the axial stress distributions during tensile loading of a polycrystalline sample. An open source code, MechMonics, is available to researchers wishing to use the methodology to analyze data.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
A methodology to evaluate continuum-scale yield surfaces based on the spatial distributions of yielding at the crystal scale
Authors:
Andrew C. Poshadel,
Paul R. Dawson
Abstract:
Using a correlation between local yielding and a multiaxial strength-to-stiffness parameter, the continuum-scale yield surface for a polyphase, polycrystalline solid is predicted. The predicted surface explicitly accounts for microstructure through the quantification of strength-to-stiffness based on a finite element model of a crystal-scale sample. The multiaxial strength-to-stiffness is evaluate…
▽ More
Using a correlation between local yielding and a multiaxial strength-to-stiffness parameter, the continuum-scale yield surface for a polyphase, polycrystalline solid is predicted. The predicted surface explicitly accounts for microstructure through the quantification of strength-to-stiffness based on a finite element model of a crystal-scale sample. The multiaxial strength-to-stiffness is evaluated from the elastic response of the sample and the restricted slip, single-crystal yield surface. Macroscopic yielding is defined by the propogation of a yield band through the sample and is detected with the aid of a flood fill agorithm. The methodology is demonstrated with the evaluation of a plane-stress yield surface for a dual-phase superaustenitic stainless steel.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Sensitivity of Crystal Stress Distributions to the Definition of Virtual Two-Phase Microstructures
Authors:
Andrew C. Poshadel,
Michael Gharghouri,
Paul R. Dawson
Abstract:
A systematic study of the sensitivities of simulation input on the computed stress distributions in two-phase microstructures is presented. The study supports a related investigation of the initiation and propagation of yielding in duplex stainless steel. Considered in the study are the identification of constitutive model parameters for the single-crystal elastic and plastic behaviors and the imp…
▽ More
A systematic study of the sensitivities of simulation input on the computed stress distributions in two-phase microstructures is presented. The study supports a related investigation of the initiation and propagation of yielding in duplex stainless steel. Considered in the study are the identification of constitutive model parameters for the single-crystal elastic and plastic behaviors and the importance of including dominant phase and grain morphologies in the instantiation of virtual samples. Behaviors computed using a finite element formulation are evaluated against experimental data for the macroscopic stress-strain behavior and against lattice strain data measured by neutron diffraction under in situ loading.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Initiation and Propagation of Plastic Yielding in Duplex Stainless Steel
Authors:
Andrew C. Poshadel,
Michael Gharghouri,
Paul R. Dawson
Abstract:
The elastoplastic behavior of a two-phase stainless steel alloy is explored at the crystal scale for five levels of stress biaxiality. The crystal lattice (elastic) strains were measured with neutron diffraction using tubular samples subjected to different combinations of axial load and internal pressure to achieve a range of biaxial stress ratios. Finite element simulations were conducted on virt…
▽ More
The elastoplastic behavior of a two-phase stainless steel alloy is explored at the crystal scale for five levels of stress biaxiality. The crystal lattice (elastic) strains were measured with neutron diffraction using tubular samples subjected to different combinations of axial load and internal pressure to achieve a range of biaxial stress ratios. Finite element simulations were conducted on virtual polycrystals using loading histories that mimicked the experimental protocols. For this, two-phase microstructures were instantiated based on microscopy images of the grain and phase topologies and on crystallographic orientation distributions from neutron diffraction. Detailed comparisons were made between the measured and computed lattice strains for several crystal reflections in both phases for scattering vectors in the axial, radial and hoop directions that confirm the model's ability to accurate predict the evolving local stress states. A strength-to-stiffness parameter for multiaxial stress states was applied to explain the initiation of yielding across the polycrystalline samples across the five levels of stress biaxiality. Finally, building off the multiaxial strength-to-stiffness, the propagation of yielding over the volume of a polycrystal was estimated in terms of an equation that provides the local stress necessary to initiate within crystals in terms of the macroscopic stress.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
Role of anisotropic strength and stiffness in governing the initiation and propagation of yielding in polycrystalline solids
Authors:
Andrew C. Poshadel,
Paul R. Dawson
Abstract:
The ratio of directional strength-to-stiffness is important in governing the relative order in which individual crystals within a polycrystalline aggregate will yield as the aggregate is loaded. In this paper, a strength-to-stiffness parameter is formulated for multiaxial loading that extends the development of Wong and Dawson for uniaxial loading. Building on the principle of strength-to-stiffnes…
▽ More
The ratio of directional strength-to-stiffness is important in governing the relative order in which individual crystals within a polycrystalline aggregate will yield as the aggregate is loaded. In this paper, a strength-to-stiffness parameter is formulated for multiaxial loading that extends the development of Wong and Dawson for uniaxial loading. Building on the principle of strength-to-stiffness, a methodology for predicting the macroscopic stresses at which elements in a finite element mesh yield is developed. This analysis uses elastic strain data from one increment of a purely elastic finite element simulation to make the prediction, given knowledge of the single-crystal yield surface. Simulations of austenitic strainless steel AL6XN are used to demonstrated the effectivness of the strength-to-stiffness parameter and yield prediction methodology.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
FEpX -- Finite Element Polycrystals: Theory, Finite Element Formulation, Numerical Implementation and Illustrative Examples
Authors:
Paul R. Dawson,
Donald E. Boyce
Abstract:
FEpX is a modeling framework for computing the elastoplastic deformations of polycrystalline solids. Using the framework, one can simulate the mechanical behavior of aggregates of crystals, referred to as virtual polycrystals, over large strain deformation paths. This article presents the theory, the finite element formulation, and important features of the numerical implementation that collective…
▽ More
FEpX is a modeling framework for computing the elastoplastic deformations of polycrystalline solids. Using the framework, one can simulate the mechanical behavior of aggregates of crystals, referred to as virtual polycrystals, over large strain deformation paths. This article presents the theory, the finite element formulation, and important features of the numerical implementation that collectively define the modeling framework. The article also provides several examples of simulating the elastoplastic behavior of polycrystalline solids to illustrate possible applications of the framework. There is an associated finite element code, also referred to as FEpX, that is based on the framework presented here and was used to perform the simulations presented in the examples. The article serves as a citable reference for the modeling framework for users of that code. Specific information about the formats of the input and output data, the code architecture, and the code archive are contained in other documents.
△ Less
Submitted 13 April, 2015;
originally announced April 2015.
-
A Methodology to Determine Tooling Interface Temperature and Traction Conditions from Measured Force and Torque in Materials Processing Simulations Based on Multimesh Error Estimation
Authors:
Paul R. Dawson,
Donald E. Boyce
Abstract:
A methodology is presented for estimating average values for the temperature and the frictional traction over a tool-workpiece interface using measured values of force and torque applied to the tool. The approach was developed specifically for friction stir welding and friction stir processing applications, but is sufficiently general to be of use in a variety of other processes that involve slidi…
▽ More
A methodology is presented for estimating average values for the temperature and the frictional traction over a tool-workpiece interface using measured values of force and torque applied to the tool. The approach was developed specifically for friction stir welding and friction stir processing applications, but is sufficiently general to be of use in a variety of other processes that involve sliding contact and heating at a tool-workpiece interface. The methodology works with a finite element framework that is intended to predict the evolution of the microstructural state of the workpiece material as it undergoes a complex thermomechanical history imposed by the process tooling. We employ a three-dimensional, Eulerian, finite element formulation; it includes coupling among the solutions for velocity, temperature and material state evolution. A critical element of the methodology is a procedure to estimate the tool interface traction and temperature from typical, measured values of force and torque. The procedure leads naturally to an intuitive basis for estimating error that is used in conjunction with multiple meshes to assure convergence. The methodology is demonstrate for a suite of three experiments that had been previously published as part of a study on the effect of weld speed on friction stir welding. The probe interface temperatures and torques are estimated for all three weld speeds and the multi-mesh error estimation methodology is employed to quantify the rate of convergence. Finally, comparison of computed and measured power usage is used as a further validation. Using the converged results, trends in the material flow, temperature, stress, deformation rate and material state with changing weld conditions are examined.
△ Less
Submitted 30 March, 2014;
originally announced March 2014.