-
An ultra-broadband photonic-chip-based traveling-wave parametric amplifier
Authors:
Nikolai Kuznetsov,
Alberto Nardi,
Alisa Davydova,
Mikhail Churaev,
Johann Riemensberger,
Paul Seidler,
Tobias J. Kippenberg
Abstract:
Optical amplification, crucial for modern communication, primarily relies on erbium-doped fiber amplifiers (EDFAs) to enhance signals without distortion. However, EDFAs only cover a portion of the low-loss spectrum of optical fibers. Optical parametric amplification, utilizing material nonlinearities, offers expanded capacity, but has faced limitations in gain and bandwidth. Addressing this, we pr…
▽ More
Optical amplification, crucial for modern communication, primarily relies on erbium-doped fiber amplifiers (EDFAs) to enhance signals without distortion. However, EDFAs only cover a portion of the low-loss spectrum of optical fibers. Optical parametric amplification, utilizing material nonlinearities, offers expanded capacity, but has faced limitations in gain and bandwidth. Addressing this, we present a high-gain continuous-traveling-wave parametric amplifier, surpassing the erbium gain window. Leveraging low-loss gallium phosphide-on-insulator photonic integrated waveguides, we achieve up to 35 dB of parametric gain, with a fiber-to-fiber net gain exceeding 10 dB across a wide wavelength range of approximately 140 nm centered at 1550 nm. We demonstrate the capability to amplify ultra-weak signals, extending over 6 orders of magnitude of input powers, optical frequency combs, and communication signals, highlighting the practical potential of our photonic-chip-based amplifier.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Lithium tantalate electro-optical photonic integrated circuits for high volume manufacturing
Authors:
Chengli Wang,
Zihan Li,
Johann Riemensberger,
Grigory Lihachev,
Mikhail Churaev,
Wil Kao,
Xinru Ji,
Terence Blesin,
Alisa Davydova,
Yang Chen,
Xi Wang,
Kai Huang,
Xin Ou,
Tobias J. Kippenberg
Abstract:
Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compound…
▽ More
Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compounded by the high cost per wafer. Here we overcome this challenge and demonstrate a photonic platform that satisfies the dichotomy of allowing scalable manufacturing at low cost, while at the same time exhibiting equal, and superior properties to those of Lithium Niobate. We demonstrate that it is possible to manufacture low loss photonic integrated circuits using Lithium Tantalate, a material that is already commercially adopted for acoustic filters in 5G and 6G. We show that LiTaO3 posses equally attractive optical properties and can be etched with high precision and negligible residues using DUV lithography, diamond like carbon (DLC) as a hard mask and alkaline wet etching. Using this approach we demonstrate microresonators with an intrinsic cavity linewidth of 26.8 MHz, corresponding to a linear loss of 5.6 dB/m and demonstrate a Mach Zehnder modulator with Vpi L = 4.2 V cm half-wave voltage length product. In comparison to Lithium Niobate, the photonic integrated circuits based on LiTaO3 exhibit a much lower birefringence, allowing high-density circuits and broadband operation over all telecommunication bands (O to L band), exhibit higher photorefractive damage threshold, and lower microwave loss tangent. Moreover, we show that the platform supports generation of soliton microcombs in X-Cut LiTaO3 racetrack microresonator with electronically detectable repetition rate, i.e. 30.1 GHz.
△ Less
Submitted 11 July, 2023; v1 submitted 28 June, 2023;
originally announced June 2023.
-
Soliton Microcomb Generation in a III-V Photonic Crystal Cavity
Authors:
Alberto Nardi,
Alisa Davydova,
Nikolai Kuznetsov,
Miles H. Anderson,
Charles Möhl,
Johann Riemensberger,
Paul Seidler,
Tobias J. Kippenberg
Abstract:
Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quali…
▽ More
Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chir** has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pum** at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs.
△ Less
Submitted 27 April, 2023; v1 submitted 25 April, 2023;
originally announced April 2023.
-
Cleaning graphene : a first quantum/classical molecular dynamics approach
Authors:
L. Delfour,
A. Davydova,
E. Despiau-Pujo,
G. Cunge,
D. B. Graves,
L. Magaud
Abstract:
Graphene outstanding properties created a huge interest in the condensed matter community and unprecedented fundings at the international scale in the hope of application developments. Recently, there have been several reports of incomplete removal of the polymer resists used to transfer as-grown graphene from one substrate to another, resulting in altered graphene transport properties. Finding a…
▽ More
Graphene outstanding properties created a huge interest in the condensed matter community and unprecedented fundings at the international scale in the hope of application developments. Recently, there have been several reports of incomplete removal of the polymer resists used to transfer as-grown graphene from one substrate to another, resulting in altered graphene transport properties. Finding a large-scale solution to clean graphene from adsorbed residues is highly desirable and one promising possibility would be to use hydrogen plasmas. In this spirit, we couple here quantum and classical molecular dynamics simulations to explore the kinetic energy ranges required by atomic hydrogen to selectively etch a simple residue, a CH3 group, without irreversibly damaging the graphene. For incident energies in the 2-15 eV range, the CH3 radical can be etched by forming a volatile CH4 compound which leaves the surface, either in the CH4 form or breaking into CH3+H fragments, without further defect formation. At this energy, adsorption of H atoms on graphene is possible and further annealing will be required to recover pristine graphene.
△ Less
Submitted 23 November, 2015;
originally announced November 2015.
-
Stable Spatial Langmuir Solitons
Authors:
T. A. Davydova,
A. I. Yakimenko,
Yu. A. Zaliznyak
Abstract:
We study localized two- and three-dimensional Langmuir solitons in the framework of model based on generalized nonlinear Schrödinger equation that accounts for local and nonlocal contributions to electron-electron nonlinearity. General properties of solitons are investigated analytically and numerically. Evolution of three-dimensional localized wave packets has been simulated numerically. The ad…
▽ More
We study localized two- and three-dimensional Langmuir solitons in the framework of model based on generalized nonlinear Schrödinger equation that accounts for local and nonlocal contributions to electron-electron nonlinearity. General properties of solitons are investigated analytically and numerically. Evolution of three-dimensional localized wave packets has been simulated numerically. The additional nonlinearities are shown to be able to stabilize both azimuthally symmetric two-dimensional and spherically symmetric three-dimensional Langmuir solitons.
△ Less
Submitted 5 August, 2004;
originally announced August 2004.
-
Stable multiple-charged localized optical vortices in cubic-quintic nonlinear media
Authors:
T. A. Davydova,
A. I. Yakimenko
Abstract:
The stability of two-dimensional bright vortex solitons in a media with focusing cubic and defocusing quintic nonlinearities is investigated analytically and numerically. It is proved that above some critical beam powers not only one- and two-charged but also multiple-charged stable vortex solitons do exist. A vortex soliton occurs robust with respect to symmetry-breaking modulational instabilit…
▽ More
The stability of two-dimensional bright vortex solitons in a media with focusing cubic and defocusing quintic nonlinearities is investigated analytically and numerically. It is proved that above some critical beam powers not only one- and two-charged but also multiple-charged stable vortex solitons do exist. A vortex soliton occurs robust with respect to symmetry-breaking modulational instability in the self-defocusing regime provided that its radial profile becomes flattened, so that a self-trapped wave beam gets a pronounced surface. It is demonstrated that the dynamics of a slightly perturbed stable vortex soliton resembles an oscillation of a liquid stream having a surface tension. Using the idea of sustaining effective surface tension for spatial vortex soliton in a media with competing nonlinearities the explanation of a suppression of the modulational instability is proposed.
△ Less
Submitted 20 August, 2003;
originally announced August 2003.
