-
Physical properties of asteroid Dimorphos as derived from the DART impact
Authors:
S. D. Raducan,
M. Jutzi,
A. F. Cheng,
Y. Zhang,
O. Barnouin,
G. S. Collins,
R. T. Daly,
T. M. Davison,
C. M. Ernst,
T. L. Farnham,
F. Ferrari,
M. Hirabayashi,
K. M. Kumamoto,
P. Michel,
N. Murdoch,
R. Nakano,
M. Pajola,
A. Rossi,
H. F. Agrusa,
B. W. Barbee,
M. Bruck Syal,
N. L. Chabot,
E. Dotto,
E. G. Fahnestock,
P. H. Hasselmann
, et al. (17 additional authors not shown)
Abstract:
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. O…
▽ More
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. Our simulation, which best matches observations, indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals (Pa), similar to asteroids (162173) Ryugu and (101955) Bennu. We find that a bulk density of Dimorphos, rhoB, lower than 2400 kg/m3, and a low volume fraction of boulders (<40 vol%) on the surface and in the shallow subsurface, are consistent with measured data from the DART experiment. These findings suggest Dimorphos is a rubble pile that might have formed through rotational mass shedding and re-accumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA's upcoming Hera mission may find a re-shaped asteroid, rather than a well-defined crater.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
The distribution of impactor core material during large impacts on Earth-like planets
Authors:
Jonathan P. Itcovitz,
Auriol S. P. Rae,
Thomas M. Davison,
Gareth S. Collins,
Oliver Shorttle
Abstract:
Large impacts onto young rocky planets may transform their compositions, creating highly reducing conditions at their surfaces and reintroducing highly siderophile metals to their mantles. Key to these processes is the availability of an impactor's chemically reduced core material (metallic iron). It is, therefore, important to constrain how much of an impactor's core remains accessible to a plane…
▽ More
Large impacts onto young rocky planets may transform their compositions, creating highly reducing conditions at their surfaces and reintroducing highly siderophile metals to their mantles. Key to these processes is the availability of an impactor's chemically reduced core material (metallic iron). It is, therefore, important to constrain how much of an impactor's core remains accessible to a planet's mantle/surface, how much is sequestered to its core, and how much escapes. Here, we present 3D simulations of such impact scenarios using the shock physics code iSALE to determine the fate of impactor iron. iSALE's inclusion of material strength is vital in capturing the behavior of both solid and fluid components of the planet and thus characterizing iron sequestration to the core. We find that the mass fractions of impactor core material that accretes to the planet core ($f_{core}$) or escapes ($f_{esc}$) can be readily parameterized as a function of a modified specific impact energy, with $f_{core} > f_{esc}$ for a wide set of impacts. These results differ from previous works that do not incorporate material strength. Our work shows that large impacts can place substantial reducing impactor core material in the mantles of young rocky planets. Impact-generated reducing atmospheres may thus be common for such worlds. However, through escape and sequestration to a planet's core, large fractions of an impactor's core can be geochemically hidden from a planet's mantle. Consequently, geochemical estimates of late bombardments of planets based on mantle siderophile element abundances may be underestimates.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the esca** impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Effects of impact and target parameters on the results of a kinetic impactor: predictions for the Double Asteroid Redirection Test (DART) mission
Authors:
Angela M. Stickle,
Mallory E. DeCoster,
Christoph Burger,
Wendy K. Caldwell,
Dawn Graninger,
Kathryn M. Kumamoto,
Robert Luther,
Jens Ormö,
Sabina Raducan,
Emma Rainey,
Christoph M. Schäfer,
James D. Walker,
Yun Zhang,
Patrick Michel,
J. Michael Owen,
Olivier Barnouin,
Andy F. Cheng,
Sidney Cochron,
Gareth S. Collins,
Thomas M. Davison,
Elisabetta Dotto,
Fabio Ferrari,
M. Isabel Herreros,
Stavro L. Ivanovski,
Martin Jutzi
, et al. (8 additional authors not shown)
Abstract:
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material pro…
▽ More
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material properties. Currently, very little is known about Dimorphos and its material properties that introduces uncertainty in the results of the deflection efficiency observables, including crater formation, ejecta distribution, and Beta. The DART Impact Modeling Working Group (IWG) is responsible for using impact simulations to better understand the results of the DART impact. Pre-impact simulation studies also provide considerable insight into how different properties and impact scenarios affect momentum enhancement following a kinetic impact. This insight provides a basis for predicting the effects of the DART impact and the first understanding of how to interpret results following the encounter. Following the DART impact, the knowledge gained from these studies will inform the initial simulations that will recreate the impact conditions, including providing estimates for potential material properties of Dimorphos and Beta resulting from DARTs impact. This paper summarizes, at a high level, what has been learned from the IWG simulations and experiments in preparation for the DART impact. While unknown, estimates for reasonable potential material properties of Dimorphos provide predictions for Beta of 1-5, depending on end-member cases in the strength regime.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Complex crater formation by oblique impacts on the Earth and Moon
Authors:
T. M. Davison,
G. S. Collins
Abstract:
Almost all meteorite impacts occur at oblique incidence angles, but the effect of impact angle on crater size is not well understood, especially for large craters. To improve oblique impact crater scaling, we present a suite of simulations of complex crater formation on Earth and the Moon over a range of impact angles, velocities and impactor sizes. We show that crater diameter is larger than pred…
▽ More
Almost all meteorite impacts occur at oblique incidence angles, but the effect of impact angle on crater size is not well understood, especially for large craters. To improve oblique impact crater scaling, we present a suite of simulations of complex crater formation on Earth and the Moon over a range of impact angles, velocities and impactor sizes. We show that crater diameter is larger than predicted by existing scaling relationships for oblique impacts and for impacts steeper than 45$^{\circ}$ shows little dependence on obliquity. Crater depth, volume and diameter depend on impact angle in different ways such that relatively shallower craters are formed by more oblique impacts. Our simulation results have implications for how crater populations are determined from impactor populations and vice-versa. Our results suggest that existing approaches to account for impact obliquity may underestimate the number of craters larger than a given size by as much as 40%.
△ Less
Submitted 8 September, 2022;
originally announced September 2022.
-
Effect of impact velocity and angle on deformational heating and post-impact temperature
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M. Davison,
Brandon C. Johnson
Abstract:
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material s…
▽ More
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material strength and explore the effects of impact angle and impact velocity. We find that oblique impacts with an impact angle that is steeper than 45 degree produce a similar amount of heated mass as vertical impacts. On the other hand, grazing impacts produce less heated mass and smaller heated regions compared to impacts at steeper angles. We derive an empirical formula of the heated mass, as a function of the impact angle and velocity. This formula can be used to estimate the impact conditions (velocity and angle) that had occurred and caused Ar loss in the meteoritic parent bodies. Furthermore, our results indicate that grazing impacts at higher impact velocities could generate a similar amount of heated material as vertical impacts at lower velocities. As the heated material produced by grazing impacts has experienced lower pressure than the material heated by vertical impacts, our results imply that grazing impacts may produce weakly shock-heated meteorites.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Optimal market completion through financial derivatives with applications to volatility risk
Authors:
Matt Davison,
Marcos Escobar-Anel,
Yichen Zhu
Abstract:
This paper investigates the optimal choices of financial derivatives to complete a financial market in the framework of stochastic volatility (SV) models. We introduce an efficient and accurate simulation-based method, applicable to generalized diffusion models, to approximate the optimal derivatives-based portfolio strategy. We build upon the double optimization approach (i.e. expected utility ma…
▽ More
This paper investigates the optimal choices of financial derivatives to complete a financial market in the framework of stochastic volatility (SV) models. We introduce an efficient and accurate simulation-based method, applicable to generalized diffusion models, to approximate the optimal derivatives-based portfolio strategy. We build upon the double optimization approach (i.e. expected utility maximization and risk exposure minimization) proposed in Escobar-Anel et al. (2022); demonstrating that strangle options are the best choices for market completion within equity options. Furthermore, we explore the benefit of using volatility index derivatives and conclude that they could be more convenient substitutes when only long-term maturity equity options are available.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Derivatives-based portfolio decisions. An expected utility insight
Authors:
Marcos Escobar-Anel,
Matt Davison,
Yichen Zhu
Abstract:
This paper challenges the use of stocks in portfolio construction, instead we demonstrate that Asian derivatives, straddles, or baskets could be more convenient substitutes. Our results are obtained under the assumptions of the Black--Scholes--Merton setting, uncovering a hidden benefit of derivatives that complements their well-known gains for hedging, risk management, and to increase utility in…
▽ More
This paper challenges the use of stocks in portfolio construction, instead we demonstrate that Asian derivatives, straddles, or baskets could be more convenient substitutes. Our results are obtained under the assumptions of the Black--Scholes--Merton setting, uncovering a hidden benefit of derivatives that complements their well-known gains for hedging, risk management, and to increase utility in market incompleteness. The new insights are also transferable to more advanced stochastic settings. The analysis relies on the infinite number of optimal choices of derivatives for a maximized expected utility (EUT) agent; we propose risk exposure minimization as an additional optimization criterion inspired by regulations. Working with two assets, for simplicity, we demonstrate that only two derivatives are needed to maximize utility while minimizing risky exposure. In a comparison among one-asset options, e.g. American, European, Asian, Calls and Puts, we demonstrate that the deepest out-of-the-money Asian products available are the best choices to minimize exposure. We also explore optimal selections among straddles, which are better practical choices than out-of-the-money Calls and Puts due to liquidity and rebalancing needs. The optimality of multi-asset derivatives is also considered, establishing that a basket option could be a better choice than one-asset Asian call/put in many realistic situations.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Influence of the projectile geometry on the momentum transfer from a kinetic impactor and implications for the DART mission
Authors:
S. D. Raducan,
M. Jutzi,
T. M. Davison,
M. E. DeCoster,
D. M. Graninger,
J. M. Owen,
A. M. Stickle,
G. S. Collins
Abstract:
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock ph…
▽ More
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock physics code in two and thee-dimensions to model vertical impacts of projectiles with a mass and speed equivalent to the nominal DART impact, into porous basalt targets. We found that the simple projectile geometries investigated here have minimal effects on the crater morphology and momentum enhancement. Projectile geometries modelled in two-dimensions that have similar surface areas at the point of impact, affect the crater radius and the crater volume by less than 5%. In the case of a more extreme projectile geometry (i.e., a rod, modelled in three-dimensions), the crater was elliptical and 50% shallower compared to the crater produced by a spherical projectile of the same momentum. The momentum enhancement factor in these test cases, commonly referred to as beta, was within 7% for the 2D simulations and within 10% for the 3D simulations, of the value obtained for a uniform spherical projectile. The most prominent effects of projectile geometry are seen in the ejection velocity as a function of launch position and ejection angle of the fast ejecta that resides in the so-called `coupling zone'. These results will inform the LICIACube ejecta cone analysis.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Ejecta distribution and momentum transfer from oblique impacts on asteroid surfaces
Authors:
S. D. Raducan,
T. M. Davison,
G. S. Collins
Abstract:
NASA's Double Asteroid Redirection Test (DART) mission will impact its target asteroid, Dimorphos, at an oblique angle that will not be known prior to the impact. We computed iSALE-3D simulations of DART-like impacts on asteroid surfaces at different impact angles and found that the the vertical momentum transfer efficiency, $β$, is similar for different impact angles, however, the imparted moment…
▽ More
NASA's Double Asteroid Redirection Test (DART) mission will impact its target asteroid, Dimorphos, at an oblique angle that will not be known prior to the impact. We computed iSALE-3D simulations of DART-like impacts on asteroid surfaces at different impact angles and found that the the vertical momentum transfer efficiency, $β$, is similar for different impact angles, however, the imparted momentum is reduced as the impact angle decreases. It is expected that the momentum imparted from a 45$^\circ$ impact is reduced by up to 50\% compared to a vertical impact. The direction of the ejected momentum is not normal to the surface, however it is observed to `straighten up' with crater growth. iSALE-2D simulations of vertical impacts provide context for the iSALE-3D simulation results and show that the ejection angle varies with both target properties and with crater growth. While the ejection angle is relatively insensitive to the target porosity, it varies by up to 30$^\circ$ with target coefficient of internal friction. The simulation results presented in this paper can help constrain target properties from the DART crater ejecta cone, which will be imaged by the LICIACube. The results presented here represent the basis for an empirical scaling relationship for oblique impacts and can be used as a framework to determine an analytical approximation of the vertical component of the ejecta momentum, $β-1$, given known target properties.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Jetting during oblique impacts of spherical impactors
Authors:
Shigeru Wakita,
Brandon Johnson,
C. Adeene Denton,
Thomas M. Davison
Abstract:
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the t…
▽ More
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the target and impactor have the same composition (dunite), we examine the jetted material which exceeds the impact velocity. Our results show that oblique impacts always produce more jetted ejecta than vertical impacts, except for grazing impacts with impact angles $< 15^{\circ}$. A 45$^{\circ}$ impact with an impact velocity of 3 km/s produces jetted material equal to $\sim$ 7 \% of the impactor mass. This is 6 times the jetted mass produced by a vertical impact with similar impact conditions. We also find that the origin of jetted ejecta depends on impact angle; for impact angles less than 45$^{\circ}$, most of the jet is composed of impactor material, while at higher impact angles the jet is dominated by target material. Our findings are consistent with previous experimental work. In all cases, jetted materials are preferentially distributed downrange of the impactor.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Influence Of Climate Change On The Corn Yield In Ontario And Its Impact On Corn Farms Income At The 2068 Horizon
Authors:
Antoine Kornprobst,
Matt Davison
Abstract:
Our study aims at quantifying the impact of climate change on corn farming in Ontario under several warming scenarios at the 2068 horizon. It is articulated around a discrete-time dynamic model of corn farm income with an annual time-step, corresponding to one agricultural cycle from planting to harvest. At each period, we compute the income given the corn yield, which is highly dependent on weath…
▽ More
Our study aims at quantifying the impact of climate change on corn farming in Ontario under several warming scenarios at the 2068 horizon. It is articulated around a discrete-time dynamic model of corn farm income with an annual time-step, corresponding to one agricultural cycle from planting to harvest. At each period, we compute the income given the corn yield, which is highly dependent on weather variables. We also provide a reproducible forecast of the yearly distribution of corn yield for 10 cities in Ontario. The price of corn futures at harvest time is taken into account and we fit our model by using 49 years of historical data. We then conduct out-of-sample Monte-Carlo simulations to obtain the farm income forecasts under a given climate change scenario.
△ Less
Submitted 10 May, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Enhancement of impact heating in pressure-strengthened rocks in oblique impacts
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M Davison
Abstract:
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference i…
▽ More
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference in the peak pressure at the impact point at a given impact velocity, we find that the heated mass for an oblique impact is nearly the same as that for a head-on impact. Thus, our results differ from the previous finding that the heated mass decreases as the impact becomes more oblique, and show that the additional shear heating is more effective for oblique impacts than for head-on impacts. This also indicates that material ejected during oblique impact tends to experience lower shock pressures but higher temperatures.
△ Less
Submitted 1 December, 2019;
originally announced December 2019.
-
Machine Learning for Yield Curve Feature Extraction: Application to Illiquid Corporate Bonds
Authors:
Greg Kirczenow,
Masoud Hashemi,
Ali Fathi,
Matt Davison
Abstract:
This paper studies an application of machine learning in extracting features from the historical market implied corporate bond yields. We consider an example of a hypothetical illiquid fixed income market. After choosing a surrogate liquid market, we apply the Denoising Autoencoder (DAE) algorithm to learn the features of the missing yield parameters from the historical data of the instruments tra…
▽ More
This paper studies an application of machine learning in extracting features from the historical market implied corporate bond yields. We consider an example of a hypothetical illiquid fixed income market. After choosing a surrogate liquid market, we apply the Denoising Autoencoder (DAE) algorithm to learn the features of the missing yield parameters from the historical data of the instruments traded in the chosen liquid market. The DAE algorithm is then challenged by two "point-in-time" inpainting algorithms taken from the image processing and computer vision domain. It is observed that, when tested on unobserved rate surfaces, the DAE algorithm exhibits superior performance thanks to the features it has learned from the historical shapes of yield curves.
△ Less
Submitted 22 November, 2018;
originally announced December 2018.
-
Machine Learning for Yield Curve Feature Extraction: Application to Illiquid Corporate Bonds (Preliminary Draft)
Authors:
Greg Kirczenow,
Ali Fathi,
Matt Davison
Abstract:
This paper studies the application of machine learning in extracting the market implied features from historical risk neutral corporate bond yields. We consider the example of a hypothetical illiquid fixed income market. After choosing a surrogate liquid market, we apply the Denoising Autoencoder algorithm from the field of computer vision and pattern recognition to learn the features of the missi…
▽ More
This paper studies the application of machine learning in extracting the market implied features from historical risk neutral corporate bond yields. We consider the example of a hypothetical illiquid fixed income market. After choosing a surrogate liquid market, we apply the Denoising Autoencoder algorithm from the field of computer vision and pattern recognition to learn the features of the missing yield parameters from the historically implied data of the instruments traded in the chosen liquid market. The results of the trained machine learning algorithm are compared with the outputs of a point in- time 2 dimensional interpolation algorithm known as the Thin Plate Spline. Finally, the performances of the two algorithms are compared.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Estimation of multiple change points under a generalised Ornstein-Uhlenbeck framework
Authors:
Fuqi Chen,
Rogemar Mamon,
Matt Davison
Abstract:
The use of an Ornstein-Uhlenbeck (OU) process is ubiquitous in business, economics and finance to capture various price processes and evolution of economic indicators exhibiting mean-reverting properties. When structural changes happen, economic dynamics drastically change and the times at which these occur are of particular interest to policy makers, investors and financial product providers. Thi…
▽ More
The use of an Ornstein-Uhlenbeck (OU) process is ubiquitous in business, economics and finance to capture various price processes and evolution of economic indicators exhibiting mean-reverting properties. When structural changes happen, economic dynamics drastically change and the times at which these occur are of particular interest to policy makers, investors and financial product providers. This paper addresses the change-point problem under a generalised OU model and investigates the associated statistical inference. We propose two estimation methods to locate multiple change points and show the asymptotic properties of the estimators. An informational approach is employed in detecting the change points, and the consistency of our methods is also theoretically demonstrated. Estimation is considered under the setting where both the number and location of change points are unknown. Three computing algorithms are further developed for implementation. The practical applicability of our methods is illustrated using simulated and observed financial market data.
△ Less
Submitted 29 May, 2017; v1 submitted 18 October, 2016;
originally announced October 2016.
-
Investigating the Impacts of Recommendation Agents on Impulsive Purchase Behaviour
Authors:
Hui Zhu,
Zherui Yang,
Carol Xj Ou,
Hongwei Liu,
Robert M Davison
Abstract:
The usage of recommendation agents (RAs) in the online marketplace can help consumers to locate their desired products. RAs can help consumers effectively obtain comprehensive product information and compare their candidate target products. As a result, RAs have affected consumers shop** behaviour. In this study, we investigate the usage and the influence of RAs in the online marketplace. Based…
▽ More
The usage of recommendation agents (RAs) in the online marketplace can help consumers to locate their desired products. RAs can help consumers effectively obtain comprehensive product information and compare their candidate target products. As a result, RAs have affected consumers shop** behaviour. In this study, we investigate the usage and the influence of RAs in the online marketplace. Based on the Stimulus-Organism-Response (SOR) model, we propose that the stimulus of using RAs (informativeness, product search effectiveness and the lack of sociality stress) can affect consumers attitude (perceived control and satisfaction), which further affects their behavioural outcomes like impulsive purchase. We validate this research model with survey data from 157 users of RAs. The data largely support the proposed model and indicate that the RAs can significantly contribute to impulsive purchase behaviour in online marketplaces. Theoretical and practical contributions are discussed.
△ Less
Submitted 4 June, 2016;
originally announced June 2016.
-
Mesoscale Modeling of Impact Compaction of Primitive Solar System Solids
Authors:
Thomas M Davison,
Gareth S Collins,
Philip A Bland
Abstract:
We have developed a method for simulating the mesoscale compaction of early solar system solids in low velocity impact events, using the iSALE shock physics code. Chondrules are represented by nonporous disks, placed within a porous matrix. By simulating impacts into bimodal mixtures over a wide range of parameter space (including the chondrule-to-matrix ratio, the matrix porosity and composition…
▽ More
We have developed a method for simulating the mesoscale compaction of early solar system solids in low velocity impact events, using the iSALE shock physics code. Chondrules are represented by nonporous disks, placed within a porous matrix. By simulating impacts into bimodal mixtures over a wide range of parameter space (including the chondrule-to-matrix ratio, the matrix porosity and composition and the impact velocity), we have shown how each of these parameters influences the shock processing of heterogeneous materials. The temperature after shock processing shows a strong dichotomy: matrix temperatures are elevated much higher than the chondrules, which remain largely cold. Chondrules can protect some matrix from shock compaction, with shadow regions in the lee side of chondrules exhibiting higher porosity that elsewhere in the matrix. Using the results from this mesoscale modelling, we show how the $\varepsilon-α$ porous compaction model parameters depend on initial bulk porosity. We also show that the timescale for the temperature dichotomy to equilibrate is highly dependent on the porosity of the matrix after the shock, and will be on the order of seconds for matrix porosities of less than 0.1, and on the order of 10's to 100's seconds for matrix porosities of $\sim$ 0.3--0.5. Finally, we have shown that the composition of the post-shock material is able to match the bulk porosity and chondrule-to-matrix ratios of meteorite groups such as carbonaceous chondrites and unequilibrated ordinary chondrites.
△ Less
Submitted 3 March, 2016; v1 submitted 1 March, 2016;
originally announced March 2016.
-
The early impact histories of meteorite parent bodies
Authors:
Thomas M Davison,
David P O'Brien,
Fred J Ciesla,
Gareth S Collins
Abstract:
We have developed a statistical framework that uses collisional evolution models, shock physics modeling and scaling laws to determine the range of plausible collisional histories for individual meteorite parent bodies. It is likely that those parent bodies that were not catastrophically disrupted sustained hundreds of impacts on their surfaces - compacting, heating, and mixing the outer layers; i…
▽ More
We have developed a statistical framework that uses collisional evolution models, shock physics modeling and scaling laws to determine the range of plausible collisional histories for individual meteorite parent bodies. It is likely that those parent bodies that were not catastrophically disrupted sustained hundreds of impacts on their surfaces - compacting, heating, and mixing the outer layers; it is highly unlikely that many parent bodies escaped without any impacts processing the outer few kilometers. The first 10 - 20 Myr were the most important time for impacts, both in terms of the number of impacts and the increase of specific internal energy due to impacts. The model has been applied to evaluate the proposed impact histories of several meteorite parent bodies: up to 10 parent bodies that were not disrupted in the first 100 Myr experienced a vaporizing collision of the type necessary to produce the metal inclusions and chondrules on the CB chondrite parent; around 1 - 5% of bodies that were catastrophically disrupted after 12 Myr sustained impacts at times that match the heating events recorded on the IAB/winonaite parent body; more than 75% of 100 km radius parent bodies which survived past 100 Myr without being disrupted sustained an impact that excavates to the depth required for mixing in the outer layers of the H chondrite parent body; and to protect the magnetic field on the CV chondrite parent body, the crust would have had to have been thick (~ 20 km) in order to prevent it being punctured by impacts.
△ Less
Submitted 10 September, 2013; v1 submitted 29 July, 2013;
originally announced July 2013.
-
Post-Impact Thermal Evolution of Porous Planetesimals
Authors:
T. M. Davison,
F. J. Ciesla,
G. S. Collins
Abstract:
Impacts between planetesimals have largely been ruled out as a heat source in the early Solar System, by calculations that show them to be an inefficient heat source and unlikely to cause global heating. However, the long-term, localized thermal effects of impacts on planetesimals have never been fully quantified. Here, we simulate a range of impact scenarios between planetesimals to determine the…
▽ More
Impacts between planetesimals have largely been ruled out as a heat source in the early Solar System, by calculations that show them to be an inefficient heat source and unlikely to cause global heating. However, the long-term, localized thermal effects of impacts on planetesimals have never been fully quantified. Here, we simulate a range of impact scenarios between planetesimals to determine the post-impact thermal histories of the parent bodies, and hence the importance of impact heating in the thermal evolution of planetesimals. We find on a local scale that heating material to petrologic type 6 is achievable for a range of impact velocities and initial porosities, and impact melting is possible in porous material at a velocity of > 4 km/s. Burial of heated impactor material beneath the impact crater is common, insulating that material and allowing the parent body to retain the heat for extended periods (~ millions of years). Cooling rates at 773 K are typically 1 - 1000 K/Ma, matching a wide range of measurements of metallographic cooling rates from chondritic materials. While the heating presented here is localized to the impact site, multiple impacts over the lifetime of a parent body are likely to have occurred. Moreover, as most meteorite samples are on the centimeter to meter scale, the localized effects of impact heating cannot be ignored.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
-
Metrics of Risk Associated with Defects Rediscovery
Authors:
Andriy V. Miranskyy,
Matthew Davison,
Mark Reesor
Abstract:
Software defects rediscovered by a large number of customers affect various stakeholders and may: 1) hint at gaps in a software manufacturer's Quality Assurance (QA) processes, 2) lead to an over-load of a software manufacturer's support and maintenance teams, and 3) consume customers' resources, leading to a loss of reputation and a decrease in sales.
Quantifying risk associated with the redisc…
▽ More
Software defects rediscovered by a large number of customers affect various stakeholders and may: 1) hint at gaps in a software manufacturer's Quality Assurance (QA) processes, 2) lead to an over-load of a software manufacturer's support and maintenance teams, and 3) consume customers' resources, leading to a loss of reputation and a decrease in sales.
Quantifying risk associated with the rediscovery of defects can help all of these stake-holders. In this chapter we present a set of metrics needed to quantify the risks. The metrics are designed to help: 1) the QA team to assess their processes; 2) the support and maintenance teams to allocate their resources; and 3) the customers to assess the risk associated with using the software product. The paper includes a validation case study which applies the risk metrics to industrial data. To calculate the metrics we use mathematical instruments like the heavy-tailed Kappa distribution and the G/M/k queuing model.
△ Less
Submitted 20 July, 2011;
originally announced July 2011.
-
Using entropy measures for comparison of software traces
Authors:
A. V. Miranskyy,
M. Davison,
M. Reesor,
S. S. Murtaza
Abstract:
The analysis of execution paths (also known as software traces) collected from a given software product can help in a number of areas including software testing, software maintenance and program comprehension. The lack of a scalable matching algorithm operating on detailed execution paths motivates the search for an alternative solution.
This paper proposes the use of word entropies for the clas…
▽ More
The analysis of execution paths (also known as software traces) collected from a given software product can help in a number of areas including software testing, software maintenance and program comprehension. The lack of a scalable matching algorithm operating on detailed execution paths motivates the search for an alternative solution.
This paper proposes the use of word entropies for the classification of software traces. Using a well-studied defective software as an example, we investigate the application of both Shannon and extended entropies (Landsberg-Vedral, Rényi and Tsallis) to the classification of traces related to various software defects. Our study shows that using entropy measures for comparisons gives an efficient and scalable method for comparing traces. The three extended entropies, with parameters chosen to emphasize rare events, all perform similarly and are superior to the Shannon entropy.
△ Less
Submitted 25 April, 2012; v1 submitted 26 October, 2010;
originally announced October 2010.
-
Utility Function and Optimum Consumption in the models with Habit Formation and Catching up with the Joneses
Authors:
Roman Naryshkin,
Matt Davison
Abstract:
This paper analyzes popular time-nonseparable utility functions that describe "habit formation" consumer preferences comparing current consumption with the time averaged past consumption of the same individual and "catching up with the Joneses" (CuJ) models comparing individual consumption with a cross-sectional average consumption level.
Few of these models give reasonable optimum consumption…
▽ More
This paper analyzes popular time-nonseparable utility functions that describe "habit formation" consumer preferences comparing current consumption with the time averaged past consumption of the same individual and "catching up with the Joneses" (CuJ) models comparing individual consumption with a cross-sectional average consumption level.
Few of these models give reasonable optimum consumption time series. We introduce theoretically justified utility specifications leading to a plausible consumption behavior to show that habit formation preferences must be described by a power CRRA utility function different from the exponential CARA used for CuJ.
△ Less
Submitted 20 September, 2009;
originally announced September 2009.
-
Portfolio Optimization under Habit Formation
Authors:
Roman Naryshkin,
Matt Davison
Abstract:
The "standard" Merton formulation of optimal investment and consumption involves optimizing the integrated lifetime utility of consumption, suitably discounted, together with the discounted future bequest. In this formulation the utility of consumption at any given time depends only on the amount consumed at that time. However, it is both theoretically and empirically reasonable that an individu…
▽ More
The "standard" Merton formulation of optimal investment and consumption involves optimizing the integrated lifetime utility of consumption, suitably discounted, together with the discounted future bequest. In this formulation the utility of consumption at any given time depends only on the amount consumed at that time. However, it is both theoretically and empirically reasonable that an individuals utility of consumption would depend on past consumption history. Economists term this "Habit Formation". We introduce a new formulation of habit formation which allows non-addictive consumption patterns for a wide variety of utility specification. In this paper we construct a simple mathematical description of this habit formation and present numerical solutions. We compare the results with the standard ones and draw insights obtained from the habit formation. The consumption path tends to increase with time and be less sensitive to the market fluctuations, which perfectly reflects the existence of habit persistence of an investor. At the same time, his decreasing risk aversion, which seems to be in contradiction with the empirical evidence, can be explained within the limitations of the model.
△ Less
Submitted 3 October, 2008;
originally announced October 2008.
-
Geodesic flow on three dimensional ellipsoids with equal semi-axes
Authors:
Chris M. Davison,
Holger R. Dullin
Abstract:
Following on from our previous study of the geodesic flow on three dimensional ellipsoid with equal middle semi-axes, here we study the remaining cases: Ellipsoids with two sets of equal semi-axes with $SO(2) \times SO(2)$ symmetry, ellipsoids with equal larger or smaller semi-axes with SO(2) symmetry, and ellipsoids with three semi-axes coinciding with SO(3) symmetry. All of these cases are Lio…
▽ More
Following on from our previous study of the geodesic flow on three dimensional ellipsoid with equal middle semi-axes, here we study the remaining cases: Ellipsoids with two sets of equal semi-axes with $SO(2) \times SO(2)$ symmetry, ellipsoids with equal larger or smaller semi-axes with SO(2) symmetry, and ellipsoids with three semi-axes coinciding with SO(3) symmetry. All of these cases are Liouville-integrable, and reduction of the symmetry leads to singular reduced systems on lower-dimensional ellipsoids. The critical values of the energy-momentum maps and their singular fibers are completely classified. In the cases with SO(2) symmetry there are corank 1 degenerate critical points; all other critical points are non-degenreate. We show that in the case with $SO(2) \times SO(2)$ symmetry three global action variables exist and the image of the energy surface under the energy-momentum map is a convex polyhedron. The case with SO(3) symmetry is non-commutatively integrable, and we show that the fibers over regular points of the energy-casimir map are $T^2$ bundles over $S^2$.
△ Less
Submitted 22 November, 2006;
originally announced November 2006.
-
Geodesics on the Ellipsoid and Monodromy
Authors:
Chris M. Davison,
Holger R. Dullin,
Alexey V. Bolsinov
Abstract:
The equations for geodesic flow on the ellipsoid are well known, and were first solved by Jacobi in 1838 by separating the variables of the Hamilton-Jacobi equation. In 1979 Moser investigated the case of the general ellipsoid with distinct semi-axes and described a set of integrals which weren't know classically. After reviewing the properties of geodesic flow on the three dimensional ellipsoid…
▽ More
The equations for geodesic flow on the ellipsoid are well known, and were first solved by Jacobi in 1838 by separating the variables of the Hamilton-Jacobi equation. In 1979 Moser investigated the case of the general ellipsoid with distinct semi-axes and described a set of integrals which weren't know classically. After reviewing the properties of geodesic flow on the three dimensional ellipsoid with distinct semi-axes, we investigate the three dimensional ellipsoid with the two middle semi-axes being equal, corresponding to a Hamiltonian invariant under rotations. The system is Liouville-integrable and thus the invariant manifolds corresponding to regular points of the energy momentum map are 3-dimensional tori. An analysis of the critical points of the energy momentum maps gives the bifurcation diagram. We find the fibres of the critical values of the energy momentum map, and carry out an analysis of the action variables. We show that the obstruction to the existence of single valued globally smooth action variables is monodromy.
△ Less
Submitted 26 September, 2006;
originally announced September 2006.
-
Choquet expectation and Peng's g-expectation
Authors:
Zeng**g Chen,
Tao Chen,
Matt Davison
Abstract:
In this paper we consider two ways to generalize the mathematical expectation of a random variable, the Choquet expectation and Peng's g-expectation. An open question has been, after making suitable restrictions to the class of random variables acted on by the Choquet expectation, for what class of expectation do these two definitions coincide? In this paper we provide a necessary and sufficient…
▽ More
In this paper we consider two ways to generalize the mathematical expectation of a random variable, the Choquet expectation and Peng's g-expectation. An open question has been, after making suitable restrictions to the class of random variables acted on by the Choquet expectation, for what class of expectation do these two definitions coincide? In this paper we provide a necessary and sufficient condition which proves that the only expectation which lies in both classes is the traditional linear expectation. This settles another open question about whether Choquet expectation may be used to obtain Monte Carlo-like solution of nonlinear PDE: It cannot, except for some very special cases.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
A study of the gravitational wave form from pulsars II
Authors:
S. R. Valluri,
J. J. Drozd,
F. A. Chishtie,
R. G. Biggs,
M. Davison,
S. V. Dhurandhar,
B. S. Sathyaprakash
Abstract:
We present analytical and numerical studies of the Fourier transform (FT) of the gravitational wave (GW) signal from a pulsar, taking into account the rotation and orbital motion of the Earth. We also briefly discuss the Zak-Gelfand Integral Transform. The Zak-Gelfand Integral Transform that arises in our analytic approach has also been useful for Schrodinger operators in periodic potentials in…
▽ More
We present analytical and numerical studies of the Fourier transform (FT) of the gravitational wave (GW) signal from a pulsar, taking into account the rotation and orbital motion of the Earth. We also briefly discuss the Zak-Gelfand Integral Transform. The Zak-Gelfand Integral Transform that arises in our analytic approach has also been useful for Schrodinger operators in periodic potentials in condensed matter physics (Bloch wave functions).
△ Less
Submitted 29 October, 2001;
originally announced October 2001.
-
A study of the gravitational wave form from pulsars
Authors:
S. R. Valluri,
F. A. Chishtie,
R. G. Biggs,
M. Davison,
Sanjeev V. Dhurandhar,
B. S. Sathyaprakash
Abstract:
We present analytical and numerical studies of the Fourier transform (FT) of the gravitational wave (GW) signal from a pulsar,taking into account the rotation of the Earth for a one day observation period.
We present analytical and numerical studies of the Fourier transform (FT) of the gravitational wave (GW) signal from a pulsar,taking into account the rotation of the Earth for a one day observation period.
△ Less
Submitted 30 November, 2000;
originally announced December 2000.
-
Response to Comments on "Simple Measure for Complexity"
Authors:
JS Shiner,
Matt Davison,
PT Landsberg
Abstract:
We respond to the comment by Crutchfield, Feldman and Shalizi and that by Binder and Perry, pointing out that there may be many maximum entropies, and therefore ``disorders'' and ``simple complexities''. Which ones are appropriate depend on the questions being addressed. ``Disorder'' is not restricted to be the ratio of a nonequilibrium entropy to the corresponding equilibrium entropy; therefore…
▽ More
We respond to the comment by Crutchfield, Feldman and Shalizi and that by Binder and Perry, pointing out that there may be many maximum entropies, and therefore ``disorders'' and ``simple complexities''. Which ones are appropriate depend on the questions being addressed. ``Disorder'' is not restricted to be the ratio of a nonequilibrium entropy to the corresponding equilibrium entropy; therefore, ``simple complexity'' need not vanish for all equiibrium systems, nor must it be nonvanishing for a nonequilibrium system.
△ Less
Submitted 10 March, 2000;
originally announced March 2000.