-
Activity Report on the Seventh African School of Fundamental Physics and Applications (ASP2022)
Authors:
Kétévi A. Assamagan,
Bobby Acharya,
Kenneth Cecire,
Christine Darve,
Fernando Ferroni,
Julia Ann Gray,
Azwinndini Muronga
Abstract:
The African School of Fundamental Physics and Applications, also known as the African School of Physics (ASP), was initiated in 2010, as a three-week biennial event, to offer additional training in fundamental and applied physics to African students with a minimum of three-year university education. Since its inception, ASP has grown to be much more than a school. ASP has become a series of activi…
▽ More
The African School of Fundamental Physics and Applications, also known as the African School of Physics (ASP), was initiated in 2010, as a three-week biennial event, to offer additional training in fundamental and applied physics to African students with a minimum of three-year university education. Since its inception, ASP has grown to be much more than a school. ASP has become a series of activities and events with directed ethos towards physics as an engine for development in Africa. We report on the seven African School of Physics, ASP2022, organized at Nelson Mandela University, on November~28 to December~8, 2022. ASP2022 included programs for university students, high school teachers and high school pupils.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Activity Report of the Second African Conference on Fundamental and Applied Physics, ACP2021
Authors:
Kétévi A. Assamagan,
Obinna Abah,
Amare Abebe,
Stephen Avery,
Diallo Boye,
Arame Boye-Faye,
Kenneth Cecire,
Mohamed Chabab,
Samuel Chigome,
Simon Connell,
Marie Chantal Cyulinyana,
Mark Macrae Dalton,
Christine Darve,
Lalla Btissam Drissi,
Farida Fassi,
Ulrich Goelach,
Mohamed Gouighri,
Paul Gueye,
Sonia Haddad,
Bjorn von der Heyden,
Oumar Ka,
Gihan Kamel,
Stéphane Kenmoe,
Diouma Kobor,
Tjaart Krüger
, et al. (16 additional authors not shown)
Abstract:
The African School of Fundamental Physics and Applications, also known as the African School of Physics (ASP), was initiated in 2010, as a three-week biennial event, to offer additional training in fundamental and applied physics to African students with a minimum of three-year university education. Since its inception, ASP has grown to be much more than a school. ASP has become a series of activi…
▽ More
The African School of Fundamental Physics and Applications, also known as the African School of Physics (ASP), was initiated in 2010, as a three-week biennial event, to offer additional training in fundamental and applied physics to African students with a minimum of three-year university education. Since its inception, ASP has grown to be much more than a school. ASP has become a series of activities and events with directed ethos towards physics as an engine for development in Africa. One such activity of ASP is the African Conference on Fundamental and Applied Physics (ACP). The first edition of ACP took place during the 2018 edition of ASP at the University of Namibia in Windhoek. In this paper, we report on the second edition of ACP, organized on March 7--11, 2022, as a virtual event.
△ Less
Submitted 6 April, 2022; v1 submitted 4 April, 2022;
originally announced April 2022.
-
The African School of Fundamental Physics and Applications Activity Report 2019-2021
Authors:
Kétévi A. Assamagan,
Bobby Acharya,
Temitope Adenuga,
Mohamed Chabab,
Kenneth Cecire,
Simon H. Connell,
Anne E. Dabrowski,
Christine Darve,
Farida Fassi,
Jonathan R. Ellis,
Fernando Ferroni,
Mounia Laassiri,
Steve G. Muanza
Abstract:
The sixth edition of the African School of Fundamental and Applied Physics (ASP) was planned for Morocco in July 2020 and was referred to as ASP2020. Preparations were at an advanced stage when ASP2020 was postponed because of the COVID-19 pandemic. The three-week event was restructured into two activities in 2021 -- an online event on July 19-30, 2021 and a hybrid event on December 12-18, 2021 --…
▽ More
The sixth edition of the African School of Fundamental and Applied Physics (ASP) was planned for Morocco in July 2020 and was referred to as ASP2020. Preparations were at an advanced stage when ASP2020 was postponed because of the COVID-19 pandemic. The three-week event was restructured into two activities in 2021 -- an online event on July 19-30, 2021 and a hybrid event on December 12-18, 2021 -- and was renamed ASP2021. At the beginning of the COVID-19 pandemic, an online lecture series was integrated into the ASP activities. The ASP mentorship program, which consists of online engagements between lecturers and assigned mentees, continued in this way. ASP alumni studied one year of COVID-19 data of ten African countries to offer insights into pandemic containment measures. In this note, we report on ASP activities since the last in-person edition of ASP in 2018 in Namibia.
△ Less
Submitted 29 September, 2021; v1 submitted 1 September, 2021;
originally announced September 2021.
-
An Innovative Ecosystem for Accelerator Science and Technology
Authors:
Christine Darve,
Jimmy Andersen,
Sarah Salman,
Martin Stankovski,
Bertrand Nicquevert,
Stephan Petit
Abstract:
The emergence of new technologies and innovative communication tools permits us to transcend societal challenges. While particle accelerators are essential instruments to improve our quality of life through science and technology, an adequate ecosystem is essential to activate and maximize this potential. Research Infrastructure (RI) and industries supported by enlightened organizations and educat…
▽ More
The emergence of new technologies and innovative communication tools permits us to transcend societal challenges. While particle accelerators are essential instruments to improve our quality of life through science and technology, an adequate ecosystem is essential to activate and maximize this potential. Research Infrastructure (RI) and industries supported by enlightened organizations and education, can generate a sustainable environment to serve this purpose. In this paper, we will discuss state-of-the-art infrastructures taking the lead to reach this impact, thus contributing to economic and social transformation.
△ Less
Submitted 6 July, 2021; v1 submitted 31 May, 2021;
originally announced June 2021.
-
Design and Construction of the MicroBooNE Detector
Authors:
MicroBooNE Collaboration,
R. Acciarri,
C. Adams,
R. An,
A. Aparicio,
S. Aponte,
J. Asaadi,
M. Auger,
N. Ayoub,
L. Bagby,
B. Baller,
R. Barger,
G. Barr,
M. Bass,
F. Bay,
K. Biery,
M. Bishai,
A. Blake,
V. Bocean,
D. Boehnlein,
V. D. Bogert,
T. Bolton,
L. Bugel,
C. Callahan,
L. Camilleri
, et al. (215 additional authors not shown)
Abstract:
This paper describes the design and construction of the MicroBooNE liquid argon time projection chamber and associated systems. MicroBooNE is the first phase of the Short Baseline Neutrino program, located at Fermilab, and will utilize the capabilities of liquid argon detectors to examine a rich assortment of physics topics. In this document details of design specifications, assembly procedures, a…
▽ More
This paper describes the design and construction of the MicroBooNE liquid argon time projection chamber and associated systems. MicroBooNE is the first phase of the Short Baseline Neutrino program, located at Fermilab, and will utilize the capabilities of liquid argon detectors to examine a rich assortment of physics topics. In this document details of design specifications, assembly procedures, and acceptance tests are reported.
△ Less
Submitted 17 January, 2017; v1 submitted 17 December, 2016;
originally announced December 2016.
-
Dynamic PID loop control
Authors:
L. Pei,
A. Klebaner,
J. Theilacker,
W. Soyars,
A. Martinez,
R. Bossert,
B. DeGraff,
C. Darve
Abstract:
The Horizontal Test Stand (HTS) SRF Cavity and Cryomodule 1 (CM1) of eight 9-cell, 1.3GHz SRF cavities are operating at Fermilab. For the cryogenic control system, how to hold liquid level constant in the cryostat by regulation of its Joule-Thompson JT-valve is very important after cryostat cool down to 2.0 K. The 72-cell cryostat liquid level response generally takes a long time delay after regul…
▽ More
The Horizontal Test Stand (HTS) SRF Cavity and Cryomodule 1 (CM1) of eight 9-cell, 1.3GHz SRF cavities are operating at Fermilab. For the cryogenic control system, how to hold liquid level constant in the cryostat by regulation of its Joule-Thompson JT-valve is very important after cryostat cool down to 2.0 K. The 72-cell cryostat liquid level response generally takes a long time delay after regulating its JT-valve; therefore, typical PID control loop should result in some cryostat parameter oscillations. This paper presents a type of PID parameter self-optimal and Time-Delay control method used to reduce cryogenic system parameters' oscillation.
△ Less
Submitted 19 September, 2012;
originally announced September 2012.
-
Instrumentation status of the low-b magnet systems at the Large Hadron Collider (LHC)
Authors:
C. Darve,
C. Balle,
J. Casas-Cubillos,
A. Perin,
N. Vauthier
Abstract:
The low-beta magnet systems are located in the Large Hadron Collider (LHC) insertion regions around the four interaction points. They are the key elements in the beams focusing/defocusing process allowing proton collisions at luminosity up to 10**34/cm**2s. Those systems are a contribution of the US-LHC Accelerator project. The systems are mainly composed of the quadrupole magnets (triplets), the…
▽ More
The low-beta magnet systems are located in the Large Hadron Collider (LHC) insertion regions around the four interaction points. They are the key elements in the beams focusing/defocusing process allowing proton collisions at luminosity up to 10**34/cm**2s. Those systems are a contribution of the US-LHC Accelerator project. The systems are mainly composed of the quadrupole magnets (triplets), the separation dipoles and their respective electrical feed-boxes (DFBX). The low-beta magnet systems operate in an environment of extreme radiation, high gradient magnetic field and high heat load to the cryogenic system due to the beam dynamic effect. Due to the severe environment, the robustness of the diagnostics is primordial for the operation of the triplets. The hardware commissioning phase of the LHC was completed in February 2010. In the sake of a safer and more user-friendly operation, several consolidations and instrumentation modifications were implemented during this commissioning phase. This paper presents the instrumentation used to optimize the engineering process and operation of the final focusing/defocusing quadrupole magnets for the first years of operation.
△ Less
Submitted 28 August, 2012;
originally announced August 2012.
-
Cryogenic safety aspect of the low -βmagnet systems at the Large Hadron Collider (LHC)
Authors:
C. Darve
Abstract:
The low -βmagnet systems are located in the LHC insertion regions around the four interaction points. They are the key elements in the beams focusing/defocusing process and will allow proton collisions at a luminosity of up to 10**34/cm**2s. Large radiation dose deposited at the proximity of the beam collisions dictate stringent requirements for the design and operation of the systems. The hardwar…
▽ More
The low -βmagnet systems are located in the LHC insertion regions around the four interaction points. They are the key elements in the beams focusing/defocusing process and will allow proton collisions at a luminosity of up to 10**34/cm**2s. Large radiation dose deposited at the proximity of the beam collisions dictate stringent requirements for the design and operation of the systems. The hardware commissioning phase of the LHC was completed in the winter of 2010 and permitted to validate this system safe operation. This paper presents the analysis used to qualify and quantify the safe operation of the low -βmagnet systems in the Large Hadron Collider (LHC) for the first years of operation.
△ Less
Submitted 8 August, 2012;
originally announced August 2012.
-
Commissioning of the cryogenics of the LHC long straight sections
Authors:
A. Perin,
J. Casas-Cubillos,
S. Claudet,
C. Darve,
G. Ferlin,
F. Millet,
C. Parente,
R. Rabehl,
M. Soubiran,
R. van Weelderen,
U. Wagner
Abstract:
The LHC is made of eight circular arcs interspaced with eight Long Straight Sections (LSS). Most powering interfaces to the LHC are located in these sections where the particle beams are focused and shaped for collision, cleaning and acceleration. The LSSs are constituted of several unique cryogenic devices and systems like electrical feed-boxes, standalone superconducting magnets, superconducting…
▽ More
The LHC is made of eight circular arcs interspaced with eight Long Straight Sections (LSS). Most powering interfaces to the LHC are located in these sections where the particle beams are focused and shaped for collision, cleaning and acceleration. The LSSs are constituted of several unique cryogenic devices and systems like electrical feed-boxes, standalone superconducting magnets, superconducting links, RF cavities and final focusing superconducting magnets. This paper presents the cryogenic commissioning and the main results obtained during the first operation of the LHC Long Straight Sections.
△ Less
Submitted 30 July, 2012;
originally announced July 2012.
-
First high power pulsed tests of a dressed 325 MHz superconducting single spoke resonator at Fermilab
Authors:
R. Madrak,
J. Branlard,
B. Chase,
C. Darve,
P. Joireman,
T. Khabiboulline,
A. Mukherjee,
T. Nicol,
E. Peoples-Evans,
D. Peterson,
Y. Pischalnikov,
L. Ristori,
W. Schappert,
D. Sergatskov,
W. Soyars,
J. Steimel,
I. Terechkine,
V. Tupikov,
R. Wagner,
R. C. Webber,
D. Wildman
Abstract:
In the recently commissioned superconducting RF cavity test facility at Fermilab (SCTF), a 325 MHz, β=0.22 superconducting single-spoke resonator (SSR1) has been tested for the first time with its input power coupler. Previously, this cavity had been tested CW with a low power, high Qext test coupler; first as a bare cavity in the Fermilab Vertical Test Stand and then fully dressed in the SCTF. Fo…
▽ More
In the recently commissioned superconducting RF cavity test facility at Fermilab (SCTF), a 325 MHz, β=0.22 superconducting single-spoke resonator (SSR1) has been tested for the first time with its input power coupler. Previously, this cavity had been tested CW with a low power, high Qext test coupler; first as a bare cavity in the Fermilab Vertical Test Stand and then fully dressed in the SCTF. For the tests described here, the design input coupler with Qext ~ 106 was used. Pulsed power was provided by a Toshiba E3740A 2.5 MW klystron.
△ Less
Submitted 17 February, 2012;
originally announced February 2012.
-
Progress in Absorber R&D 2: Windows
Authors:
D. M. Kaplan,
E. L. Black,
K. W. Cassel,
S. Geer,
M. Popovic,
S. Ishimoto,
K. Yoshimura,
L. Bandura,
M. A. Cummings,
A. Dyshkant,
D. Kubik,
D. Hedin,
C. Darve,
Y. Kuno,
D. Errede,
M. Haney,
S. Majewski,
M. Reep,
D. Summers
Abstract:
A program is underway to develop liquid-hydrogen energy absorbers for ionization cooling of muon-beam transverse emittance. Minimization of multiple-scattering-induced beam heating requires thin windows. The first window prototype has been destructively tested, validating the finite-element-analysis model and the design approach.
A program is underway to develop liquid-hydrogen energy absorbers for ionization cooling of muon-beam transverse emittance. Minimization of multiple-scattering-induced beam heating requires thin windows. The first window prototype has been destructively tested, validating the finite-element-analysis model and the design approach.
△ Less
Submitted 17 August, 2001;
originally announced August 2001.
-
Progress in Absorber R&D for Muon Cooling
Authors:
D. M. Kaplan,
E. L. Black,
M. Boghosian,
K. W. Cassel,
R. P. Johnson,
S. Geer,
C. J. Johnstone,
M. Popovic,
S. Ishimoto,
K. Yoshimura,
L. Bandura,
M. A. Cummings,
A. Dyshkant,
D. Hedin,
D. Kubik,
C. Darve,
Y. Kuno,
D. Errede,
M. Haney,
S. Majewski,
M. Reep,
D. Summers
Abstract:
A stored-muon-beam neutrino factory may require transverse ionization cooling of the muon beam. We describe recent progress in research and development on energy absorbers for muon-beam cooling carried out by a collaboration of university and laboratory groups.
A stored-muon-beam neutrino factory may require transverse ionization cooling of the muon beam. We describe recent progress in research and development on energy absorbers for muon-beam cooling carried out by a collaboration of university and laboratory groups.
△ Less
Submitted 17 August, 2001; v1 submitted 15 August, 2001;
originally announced August 2001.
