Showing 1–26 of 26 results for author: Darak, S J

Low Complexity Deep Learning Augmented Wireless Channel Estimation for Pilot-Based OFDM on Zynq System on Chip

Authors: Animesh Sharma, Syed Asrar Ul Haq, Sumit J. Darak

Abstract: Channel estimation (CE) is one of the critical signal-processing tasks of the wireless physical layer (PHY). Recent deep learning (DL) based CE have outperformed statistical approaches such as least-square-based CE (LS) and linear minimum mean square error-based CE (LMMSE). However, existing CE approaches have not yet been realized on system-on-chip (SoC). The first contribution of this paper is t… ▽ More Channel estimation (CE) is one of the critical signal-processing tasks of the wireless physical layer (PHY). Recent deep learning (DL) based CE have outperformed statistical approaches such as least-square-based CE (LS) and linear minimum mean square error-based CE (LMMSE). However, existing CE approaches have not yet been realized on system-on-chip (SoC). The first contribution of this paper is to efficiently implement the existing state-of-the-art CE algorithms on Zynq SoC (ZSoC), comprising of ARM processor and field programmable gate array (FPGA), via hardware-software co-design and fixed point analysis. We validate the superiority of DL-based CE and LMMSE over LS for various signal-to-noise ratios (SNR) and wireless channels in terms of mean square error (MSE) and bit error rate (BER). We also highlight the high complexity, execution time, and power consumption of DL-based CE and LMMSE approaches. To address this, we propose a novel compute-efficient LS-augmented interpolated deep neural network (LSiDNN) based CE algorithm and realize it on ZSoC. The proposed LSiDNN offers 88-90% lower execution time and 38-85% lower resource utilization than state-of-the-art DL-based CE for identical MSE and BER. LSiDNN offers significantly lower MSE and BER than LMMSE, and the gain improves with increased mobility between transceivers. It offers 75% lower execution time and 90-94% lower resource utilization than LMMSE. △ Less

Submitted 2 March, 2024; originally announced March 2024.

Hardware Software Co-Design Based Reconfigurable Radar Signal Processing Accelerator for Joint Radar-Communication System

Authors: Shragvi Sidharth Jha, Aakanksha Tewari, Sumit J Darak, Akanksha Sneh, Shobha Sundar Ram

Abstract: Millimeter wave (mmW) codesigned 802.11ad-based joint radar communication (JRC) systems have been identified as a potential solution for realizing high bandwidth connected vehicles for next-generation intelligent transportation systems. The radar functionality within the JRC enables accurate detection and localization of mobile targets, which can significantly speed up the selection of the optimal… ▽ More Millimeter wave (mmW) codesigned 802.11ad-based joint radar communication (JRC) systems have been identified as a potential solution for realizing high bandwidth connected vehicles for next-generation intelligent transportation systems. The radar functionality within the JRC enables accurate detection and localization of mobile targets, which can significantly speed up the selection of the optimal high-directional narrow beam required for mmW communications between the base station and mobile target. To bring JRC to reality, a radar signal processing (RSP) accelerator, co-located with the wireless communication physical layer (PHY), on edge platforms is desired. In this work, we discuss the three-dimensional digital hardware RSP framework for 802.11ad-based JRC to detect the range, azimuth, and Doppler velocity of multiple targets. We present a novel efficient reconfigurable architecture for RSP on multi-processor system-on-chip (MPSoC) via hardware-software co-design, word-length optimization, and serial-parallel configurations. We demonstrate the functional correctness of the proposed fixed-point architecture and significant savings in resource utilization (~40-70), execution time (1.5x improvement), and power consumption (50%) over floating-point architecture. The acceleration on hardware offers a 120-factor improvement in execution time over the benchmark Quad-core processor. The proposed architecture enables on-the-fly reconfigurability to support different azimuth precision and Doppler velocity resolution, offering a real-time trade-off between functional accuracy and detection time. We demonstrate end-to-end RSP on MPSoC with a user-friendly graphical user interface (GUI). △ Less

Submitted 2 March, 2023; originally announced March 2023.

Design and Performance Analysis of Hardware Realization of 3GPP Physical Layer for 5G Cell Search

Authors: Khalid Lodhi, Jayant Chhillar, Sumit J. Darak, Divisha Sharma

Abstract: 5G Cell Search (CS) is the first step for user equipment (UE) to initiate the communication with the 5G node B (gNB) every time it is powered ON. In cellular networks, CS is accomplished via synchronization signals (SS) broadcasted by gNB. 5G 3rd generation partnership project (3GPP) specifications offer a detailed discussion on the SS generation at gNB but a limited understanding of their blind s… ▽ More 5G Cell Search (CS) is the first step for user equipment (UE) to initiate the communication with the 5G node B (gNB) every time it is powered ON. In cellular networks, CS is accomplished via synchronization signals (SS) broadcasted by gNB. 5G 3rd generation partnership project (3GPP) specifications offer a detailed discussion on the SS generation at gNB but a limited understanding of their blind search, and detection is available. Unlike 4G, 5G SS may not be transmitted at the center of carrier frequency and their frequency location is unknown to UE. In this work, we demonstrate the 5G CS by designing 3GPP compatible hardware realization of the physical layer (PHY) of the gNB transmitter and UE receiver. The proposed SS detection explores a novel down-sampling approach resulting in a significant reduction in complexity and latency. Via detailed performance analysis, we analyze the functional correctness, computational complexity, and latency of the proposed approach for different word lengths, signal-to-noise ratio (SNR), and down-sampling factors. We demonstrate the complete CS functionality on GNU Radio-based RFNoC framework and USRP-FPGA platform. The 3GPP compatibility and demonstration on hardware strengthen the commercial significance of the proposed work. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Hardware Software Co-design of Statistical and Deep Learning Frameworks for Wideband Sensing on Zynq System on Chip

Authors: Rohith Rajesh, Sumit J. Darak, Akshay Jain, Shivam Chandhok, Animesh Sharma

Abstract: With the introduction of spectrum sharing and heterogeneous services in next-generation networks, the base stations need to sense the wideband spectrum and identify the spectrum resources to meet the quality-of-service, bandwidth, and latency constraints. Sub-Nyquist sampling (SNS) enables digitization for sparse wideband spectrum without needing Nyquist speed analog-to-digital converters. However… ▽ More With the introduction of spectrum sharing and heterogeneous services in next-generation networks, the base stations need to sense the wideband spectrum and identify the spectrum resources to meet the quality-of-service, bandwidth, and latency constraints. Sub-Nyquist sampling (SNS) enables digitization for sparse wideband spectrum without needing Nyquist speed analog-to-digital converters. However, SNS demands additional signal processing algorithms for spectrum reconstruction, such as the well-known orthogonal matching pursuit (OMP) algorithm. OMP is also widely used in other compressed sensing applications. The first contribution of this work is efficiently map** the OMP algorithm on the Zynq system-on-chip (ZSoC) consisting of an ARM processor and FPGA. Experimental analysis shows a significant degradation in OMP performance for sparse spectrum. Also, OMP needs prior knowledge of spectrum sparsity. We address these challenges via deep-learning-based architectures and efficiently map them on the ZSoC platform as second contribution. Via hardware-software co-design, different versions of the proposed architecture obtained by partitioning between software (ARM processor) and hardware (FPGA) are considered. The resource, power, and execution time comparisons for given memory constraints and a wide range of word lengths are presented for these architectures. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Deep Neural Network Augmented Wireless Channel Estimation for Preamble-based OFDM PHY on Zynq System on Chip

Authors: Syed Asrar ul haq, Abdul Karim Gizzini, Shakti Shrey, Sumit J. Darak, Sneh Saurabh, Marwa Chafii

Abstract: Reliable and fast channel estimation is crucial for next-generation wireless networks supporting a wide range of vehicular and low-latency services. Recently, deep learning (DL) based channel estimation has been explored as an efficient alternative to conventional least-square (LS) and linear minimum mean square error (LMMSE) approaches. Most of these DL approaches have not been realized on system… ▽ More Reliable and fast channel estimation is crucial for next-generation wireless networks supporting a wide range of vehicular and low-latency services. Recently, deep learning (DL) based channel estimation has been explored as an efficient alternative to conventional least-square (LS) and linear minimum mean square error (LMMSE) approaches. Most of these DL approaches have not been realized on system-on-chip (SoC), and preliminary study shows that their complexity exceeds the complexity of the entire physical layer (PHY). The high latency of DL is another concern. This paper considers the design and implementation of deep neural network (DNN) augmented LS-based channel estimation (LSDNN) for preamble-based orthogonal frequency-division multiplexing (OFDM) physical layer (PHY) on SoC. We demonstrate the gain in performance compared to the conventional LS and LMMSE approaches. Via software-hardware co-design, word-length optimization, and reconfigurable architectures, we demonstrate the superiority of the LSDNN over the LS and LMMSE for a wide range of signal-to-noise ratio (SNR), number of pilots, preamble types, and wireless channels. Further, we evaluate the performance, power, and area (PPA) of the LS and LSDNN application-specific integrated circuit (ASIC) implementations in 45 nm technology. We demonstrate that word-length optimization can substantially improve PPA for the proposed architecture in ASIC implementations. △ Less

Submitted 29 April, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Exploiting Side Information for Improved Online Learning Algorithms in Wireless Networks

Authors: Manjesh K. Hanawal, Sumit J. Darak

Abstract: In wireless networks, the rate achieved depends on factors like level of interference, hardware impairments, and channel gain. Often, instantaneous values of some of these factors can be measured, and they provide useful information about the instantaneous rate achieved. For example, higher interference implies a lower rate. In this work, we treat any such measurable quality that has a non-zero co… ▽ More In wireless networks, the rate achieved depends on factors like level of interference, hardware impairments, and channel gain. Often, instantaneous values of some of these factors can be measured, and they provide useful information about the instantaneous rate achieved. For example, higher interference implies a lower rate. In this work, we treat any such measurable quality that has a non-zero correlation with the rate achieved as side-information and study how it can be exploited to quickly learn the channel that offers higher throughput (reward). When the mean value of the side-information is known, using control variate theory we develop algorithms that require fewer samples to learn the parameters and can improve the learning rate compared to cases where side-information is ignored. Specifically, we incorporate side-information in the classical Upper Confidence Bound (UCB) algorithm and quantify the gain achieved in the regret performance. We show that the gain is proportional to the amount of the correlation between the reward and associated side-information. We discuss in detail various side-information that can be exploited in cognitive radio and air-to-ground communication in $L-$band. We demonstrate that correlation between the reward and side-information is often strong in practice and exploiting it improves the throughput significantly. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Resource Constrained Neural Networks for 5G Direction-of-Arrival Estimation in Micro-controllers

Authors: Piyush Sahoo, Romesh Rajoria, Shivam Chandhok, S. J. Darak, Danilo Pau, Hem-Dutt Dabral

Abstract: With the introduction of shared spectrum sensing and beam-forming based multi-antenna transceivers, 5G networks demand spectrum sensing to identify opportunities in time, frequency, and spatial domains. Narrow beam-forming makes it difficult to have spatial sensing (direction-of-arrival, DoA, estimation) in a centralized manner, and with the evolution of paradigms such as artificial intelligence o… ▽ More With the introduction of shared spectrum sensing and beam-forming based multi-antenna transceivers, 5G networks demand spectrum sensing to identify opportunities in time, frequency, and spatial domains. Narrow beam-forming makes it difficult to have spatial sensing (direction-of-arrival, DoA, estimation) in a centralized manner, and with the evolution of paradigms such as artificial intelligence of Things (AIOT), ultra-reliable low latency communication (URLLC) services and distributed networks, intelligence for edge devices (Edge-AI) is highly desirable. It helps to reduce the data-communication overhead compared to cloud-AI-centric networks and is more secure and free from scalability limitations. However, achieving desired functional accuracy is a challenge on edge devices such as microcontroller units (MCU) due to area, memory, and power constraints. In this work, we propose low complexity neural network-based algorithm for accurate DoA estimation and its efficient map** on the off-the-self MCUs. An ad-hoc graphical-user interface (GUI) is developed to configure the STM32 NUCLEO-H743ZI2 MCU with the proposed algorithm and to validate its functionality. The performance of the proposed algorithm is analyzed for different signal-to-noise ratios (SNR), word-length, the number of antennas, and DoA resolution. In-depth experimental results show that it outperforms the conventional statistical spatial sensing approach. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Multi-armed Bandit Algorithms on System-on-Chip: Go Frequentist or Bayesian?

Authors: S. V. Sai Santosh, Sumit J. Darak

Abstract: Multi-armed Bandit (MAB) algorithms identify the best arm among multiple arms via exploration-exploitation trade-off without prior knowledge of arm statistics. Their usefulness in wireless radio, IoT, and robotics demand deployment on edge devices, and hence, a map** on system-on-chip (SoC) is desired. Theoretically, the Bayesian approach-based Thompson Sampling (TS) algorithm offers better perf… ▽ More Multi-armed Bandit (MAB) algorithms identify the best arm among multiple arms via exploration-exploitation trade-off without prior knowledge of arm statistics. Their usefulness in wireless radio, IoT, and robotics demand deployment on edge devices, and hence, a map** on system-on-chip (SoC) is desired. Theoretically, the Bayesian approach-based Thompson Sampling (TS) algorithm offers better performance than the frequentist approach-based Upper Confidence Bound (UCB) algorithm. However, TS is not synthesizable due to Beta function. We address this problem by approximating it via a pseudo-random number generator-based approach and efficiently realize the TS algorithm on Zynq SoC. In practice, the type of arms distribution (e.g., Bernoulli, Gaussian, etc.) is unknown and hence, a single algorithm may not be optimal. We propose a reconfigurable and intelligent MAB (RI-MAB) framework. Here, intelligence enables the identification of appropriate MAB algorithms for a given environment, and reconfigurability allows on-the-fly switching between algorithms on the SoC. This eliminates the need for parallel implementation of algorithms resulting in huge savings in resources and power consumption. We analyze the functional correctness, area, power, and execution time of the proposed and existing architectures for various arm distributions, word-length, and hardware-software co-design approaches. We demonstrate the superiority of the RI-MAB over TS and UCB only architectures. △ Less

Submitted 5 June, 2021; originally announced June 2021.

Reconfigurable Architecture for Spatial Sensing in Wideband Radio Front-End

Authors: M. Gupta, S. Sharma, H. Joshi, S. J. Darak

Abstract: The deployment of cellular spectrum in licensed, shared and unlicensed spectrum demands wideband sensing over non-contiguous sub-6 GHz spectrum. To improve the spectrum and energy efficiency, beamforming and massive multi-antenna systems are being explored which demand spatial sensing i.e. blind identification of vacant frequency bands and direction-of-arrival (DoA) of the occupied bands. We propo… ▽ More The deployment of cellular spectrum in licensed, shared and unlicensed spectrum demands wideband sensing over non-contiguous sub-6 GHz spectrum. To improve the spectrum and energy efficiency, beamforming and massive multi-antenna systems are being explored which demand spatial sensing i.e. blind identification of vacant frequency bands and direction-of-arrival (DoA) of the occupied bands. We propose a reconfigurable architecture to perform spatial sensing of multi-band spectrum digitized via wideband radio front-end comprising of the sparse antenna array (SAA) and Sub-Nyquist Sampling (SNS). The proposed architecture comprises SAA pre-processing and algorithms to perform spatial sensing directly on SNS samples. The proposed architecture is realized on Zynq System on Chip (SoC), consisting of the ARM processor and FPGA, via hardware-software co-design (HSCD). Using the dynamic partial reconfiguration (DPR), on-the-fly switching between algorithms depending on the number of active signals in the sensed spectrum is enabled. The functionality, resource utilization, and execution time of the proposed architecture are analyzed for various HSCD configurations, word-length, number of digitized samples, signal-to-noise ratio (SNR), and antenna array (sparse/non-sparse). △ Less

Submitted 26 May, 2021; originally announced May 2021.

Comments: 16 pages, 13 figures

Towards Intelligent Reconfigurable Wireless Physical Layer (PHY)

Authors: Neelam Singh, S. V. Sai Santosh, Sumit J. Darak

Abstract: Next-generation wireless networks are getting significant attention because they promise 10-factor enhancement in mobile broadband along with the potential to enable new heterogeneous services. Services include massive machine type communications desired for Industrial 4.0 along with ultra-reliable low latency services for remote healthcare and vehicular communications. In this paper, we present t… ▽ More Next-generation wireless networks are getting significant attention because they promise 10-factor enhancement in mobile broadband along with the potential to enable new heterogeneous services. Services include massive machine type communications desired for Industrial 4.0 along with ultra-reliable low latency services for remote healthcare and vehicular communications. In this paper, we present the design of an intelligent and reconfigurable physical layer (PHY) to bring these services to reality. First, we design and implement the reconfigurable PHY via a hardware-software co-design approach on system-on-chip consisting of the ARM processor and field-programmable gate array (FPGA). The reconfigurable PHY is then made intelligent by augmenting it with online machine learning (OML) based decision-making algorithm. Such PHY can learn the environment (for example, wireless channel) and dynamically adapt the transceivers' configuration (i.e., modulation scheme, word-length) and select the wireless channel on-the-fly. Since the environment is unknown and changes with time, we make the OML architecture reconfigurable to enable dynamic switch between various OML algorithms on-the-fly. We have demonstrated the functional correctness of the proposed architecture for different environments and word-lengths. The detailed throughput, latency, and complexity analysis validate the feasibility and importance of the proposed intelligent and reconfigurable PHY in next-generation networks. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Journal ref: OJCAS Special Section on Circuits, Systems, and Algorithms for Beyond 5G and towards 6G, 2020

Design and Implementation of Low Complexity Reconfigurable Filtered-OFDM based LDACS

Authors: N. Agrawal, A. Ambede, S. J. Darak, A. P. Vinod, A. S. Madhukumar

Abstract: L-band Digital Aeronautical Communication System (LDACS) aims to exploit vacant spectrum in L-band via spectrum sharing, and orthogonal frequency division multiplexing (OFDM) is the currently accepted LDACS waveform. Recently, various works dealing with improving the spectrum utilization of LDACS via filtering/windowing are being explored. In this direction, we propose an improved and low complexi… ▽ More L-band Digital Aeronautical Communication System (LDACS) aims to exploit vacant spectrum in L-band via spectrum sharing, and orthogonal frequency division multiplexing (OFDM) is the currently accepted LDACS waveform. Recently, various works dealing with improving the spectrum utilization of LDACS via filtering/windowing are being explored. In this direction, we propose an improved and low complexity reconfigurable filtered OFDM (LRef-OFDM) based LDACS using novel interpolation and masking based multi-stage digital filter. The proposed filter is designed to meet the stringent non-uniform spectral attenuation requirements of LDACS standard. It offers significantly lower complexity as well as higher transmission bandwidth than state-of-the-art approaches. We also integrate the proposed filter in our end-to-end LDACS testbed realized using Zynq System on Chip and analyze the performance in the presence of $L$-band legacy user interference as well as LDACS specific wireless channels. Via extensive experimental results, we demonstrate the superiority of the proposed LRef-OFDM over OFDM and Filtered-OFDM based LDACS in terms of power spectral density, bit error rate, implementation complexity, and group delay parameters. △ Less

Submitted 17 January, 2021; v1 submitted 21 September, 2020; originally announced September 2020.

Comments: Paper with Appendix

Reconfigurable and Intelligent Ultra-Wideband Angular Sensing: Prototype Design and Validation

Authors: Himani Joshi, Sumit J. Darak, Mohammad Alaee-Kerahroodi, Bhavani Shankar Mysore Rama Rao

Abstract: The emergence of beyond-licensed spectrum sharing in FR1 (0.45-6 GHz) and FR2 (24 - 52 GHz) along with the multi-antenna narrow-beam based directional transmissions demand a wideband spectrum sensing in temporal as well as spatial domains. We referred to it as ultra-wideband angular spectrum sensing (UWAS), and it consists of digitization followed by characterization of the wideband spectrum. In t… ▽ More The emergence of beyond-licensed spectrum sharing in FR1 (0.45-6 GHz) and FR2 (24 - 52 GHz) along with the multi-antenna narrow-beam based directional transmissions demand a wideband spectrum sensing in temporal as well as spatial domains. We referred to it as ultra-wideband angular spectrum sensing (UWAS), and it consists of digitization followed by characterization of the wideband spectrum. In this paper, we design and develop state-of-the-art UWAS prototype using USRPs and LabVIEW NXG for the validation in the real-radio environment. Since 5G is expected to co-exist with LTE, the transmitter generates the multi-directional multi-user wideband traffic via LTE specific single carrier frequency division multiple access (SC-FDMA) approach. At the receiver, the first step of wideband spectrum digitization is accomplished using a novel approach of integrating sparse antenna-array with reconfigurable sub-Nyquist sampling (SNS). The reconfigurable SNS allows the digitization of non-contiguous spectrum via low-rate analog-to-digital converters, but it needs intelligence to choose the frequency bands for digitization. We explore the multi-play multi-armed bandit based learning algorithm to embed intelligence. Compared to previous works, the proposed characterization (frequency band status and direction-of-arrival estimation) approach does not need prior knowledge of received signal distribution. The detailed experimental results for various spectrum statistics, power gains and antenna array arrangements along with lower complexity validate the functional correctness, superiority and feasibility of the proposed UWAS over state-of-the-art approaches. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Distributed Learning in Ad-Hoc Networks: A Multi-player Multi-armed Bandit Framework

Authors: Sumit J. Darak, Manjesh K. Hanawal

Abstract: Next-generation networks are expected to be ultra-dense with a very high peak rate but relatively lower expected traffic per user. For such scenario, existing central controller based resource allocation may incur substantial signaling (control communications) leading to a negative effect on the quality of service (e.g. drop calls), energy and spectrum efficiency. To overcome this problem, cogniti… ▽ More Next-generation networks are expected to be ultra-dense with a very high peak rate but relatively lower expected traffic per user. For such scenario, existing central controller based resource allocation may incur substantial signaling (control communications) leading to a negative effect on the quality of service (e.g. drop calls), energy and spectrum efficiency. To overcome this problem, cognitive ad-hoc networks (CAHN) that share spectrum with other networks are being envisioned. They allow some users to identify and communicate in `free slots' thereby reducing signaling load and allowing the higher number of users per base stations (dense networks). Such networks open up many interesting challenges such as resource identification, coordination, dynamic and context-aware adaptation for which Machine Learning and Artificial Intelligence framework offers novel solutions. In this paper, we discuss state-of-the-art multi-armed multi-player bandit based distributed learning algorithms that allow users to adapt to the environment and coordinate with other players/users. We also discuss various open research problems for feasible realization of CAHN and interesting applications in other domains such as energy harvesting, Internet of Things, and Smart grids. △ Less

Submitted 6 March, 2020; originally announced April 2020.

Distributed Algorithm for Dynamic Cognitive Ad-hoc Networks

Authors: Rohit Kumar, Shaswat Satapathy, Shivani Singh, Sumit J. Darak

Abstract: Cognitive ad-hoc networks allow users to access an unlicensed/shared spectrum without the need for any coordination via a central controller and are being envisioned for futuristic ultra-dense wireless networks. The ad-hoc nature of networks require each user to learn and regularly update various network parameters such as channel quality and the number of users, and use learned information to imp… ▽ More Cognitive ad-hoc networks allow users to access an unlicensed/shared spectrum without the need for any coordination via a central controller and are being envisioned for futuristic ultra-dense wireless networks. The ad-hoc nature of networks require each user to learn and regularly update various network parameters such as channel quality and the number of users, and use learned information to improve the spectrum utilization and minimize collisions. For such a learning and coordination task, we propose a distributed algorithm based on a multi-player multi-armed bandit approach and novel signaling scheme. The proposed algorithm does not need prior knowledge of network parameters (users, channels) and its ability to detect as well as adapt to the changes in the network parameters thereby making it suitable for static as well as dynamic networks. The theoretical analysis and extensive simulation results validate the superiority of the proposed algorithm over existing state-of-the-art algorithms. △ Less

Submitted 28 March, 2020; originally announced March 2020.

Intelligent and Reconfigurable Architecture for KL Divergence Based Online Machine Learning Algorithm

Authors: S. V. Sai Santosh, Sumit J. Darak

Abstract: Online machine learning (OML) algorithms do not need any training phase and can be deployed directly in an unknown environment. OML includes multi-armed bandit (MAB) algorithms that can identify the best arm among several arms by achieving a balance between exploration of all arms and exploitation of optimal arm. The Kullback-Leibler divergence based upper confidence bound (KLUCB) is the state-of-… ▽ More Online machine learning (OML) algorithms do not need any training phase and can be deployed directly in an unknown environment. OML includes multi-armed bandit (MAB) algorithms that can identify the best arm among several arms by achieving a balance between exploration of all arms and exploitation of optimal arm. The Kullback-Leibler divergence based upper confidence bound (KLUCB) is the state-of-the-art MAB algorithm that optimizes exploration-exploitation trade-off but it is complex due to underlining optimization routine. This limits its usefulness for robotics and radio applications which demand integration of KLUCB with the PHY on the system on chip (SoC). In this paper, we efficiently map the KLUCB algorithm on SoC by realizing optimization routine via alternative synthesizable computation without compromising on the performance. The proposed architecture is dynamically reconfigurable such that the number of arms, as well as type of algorithm, can be changed on-the-fly. Specifically, after initial learning, on-the-fly switch to light-weight UCB offers around 10-factor improvement in latency and throughput. Since learning duration depends on the unknown arm statistics, we offer intelligence embedded in architecture to decide the switching instant. We validate the functional correctness and usefulness of the proposed architecture via a realistic wireless application and detailed complexity analysis demonstrates its feasibility in realizing intelligent radios. △ Less

Submitted 18 February, 2020; originally announced February 2020.

Novel Deep Learning Framework for Wideband Spectrum Characterization at Sub-Nyquist Rate

Authors: Shivam Chandhok, Himani Joshi, A V Subramanyam, Sumit J. Darak

Abstract: Introduction of spectrum-sharing in 5G and subsequent generation networks demand base-station(s) with the capability to characterize the wideband spectrum spanned over licensed, shared and unlicensed non-contiguous frequency bands. Spectrum characterization involves the identification of vacant bands along with center frequency and parameters (energy, modulation, etc.) of occupied bands. Such char… ▽ More Introduction of spectrum-sharing in 5G and subsequent generation networks demand base-station(s) with the capability to characterize the wideband spectrum spanned over licensed, shared and unlicensed non-contiguous frequency bands. Spectrum characterization involves the identification of vacant bands along with center frequency and parameters (energy, modulation, etc.) of occupied bands. Such characterization at Nyquist sampling is area and power-hungry due to the need for high-speed digitization. Though sub-Nyquist sampling (SNS) offers an excellent alternative when the spectrum is sparse, it suffers from poor performance at low signal to noise ratio (SNR) and demands careful design and integration of digital reconstruction, tunable channelizer and characterization algorithms. In this paper, we propose a novel deep-learning framework via a single unified pipeline to accomplish two tasks: 1)~Reconstruct the signal directly from sub-Nyquist samples, and 2)~Wideband spectrum characterization. The proposed approach eliminates the need for complex signal conditioning between reconstruction and characterization and does not need complex tunable channelizers. We extensively compare the performance of our framework for a wide range of modulation schemes, SNR and channel conditions. We show that the proposed framework outperforms existing SNS based approaches and characterization performance approaches to Nyquist sampling-based framework with an increase in SNR. Easy to design and integrate along with a single unified deep learning framework make the proposed architecture a good candidate for reconfigurable platforms. △ Less

Submitted 7 May, 2020; v1 submitted 11 December, 2019; originally announced December 2019.

Spectral Coexistence of LDACS and DME: Analysis via Hardware Software Co-Design in Presence of Real Channels and RF Impairments

Authors: Niharika Agrawal, S. J. Darak, Faouzi Bader

Abstract: To meet the exponentially increasing air traffic, L-band (960-1164 MHz) digital aeronautical communication system (LDACS) has been introduced. The LDACS aims to exploit the vacant spectrum between incumbent Distance Measuring Equipment (DME) signals and envisioned to follow an orthogonal frequency division multiplexing (OFDM) approach to support high-speed delay-sensitive multimedia services. This… ▽ More To meet the exponentially increasing air traffic, L-band (960-1164 MHz) digital aeronautical communication system (LDACS) has been introduced. The LDACS aims to exploit the vacant spectrum between incumbent Distance Measuring Equipment (DME) signals and envisioned to follow an orthogonal frequency division multiplexing (OFDM) approach to support high-speed delay-sensitive multimedia services. This paper deals with the design and implementation of end-to-end LDACS the transceiver on the Zynq System on Chip platform, consisting of FPGA as programmable logic (PL) and ARM as processing system (PS). We consider OFDM based LDACS and improve it further using windowing and/or filtering. We propose a hardware-software co-design approach and analyze various transceiver configurations by dividing it into PL and PS. We demonstrate the flexibility offered by such a co-design approach to choose the configuration as well as word-length for a given area, delay and power constraints. The transceiver is also integrated with the programmable analog front-end to validate its functionality in the presence of various RF impairments and wireless channels and interference specific to the LDACS environment. Via in-depth performance analysis concerning parameters such as out-of-band attenuation, DME interference, bit-error-rate, word-length, and complexity, we demonstrate wide bandwidth filtered OFDM as an attractive solution for the next generation LDACS. △ Less

Submitted 2 May, 2020; v1 submitted 10 October, 2019; originally announced October 2019.

Multiplayer Multi-armed Bandits for Optimal Assignment in Heterogeneous Networks

Authors: Harshvardhan Tibrewal, Sravan Patchala, Manjesh K. Hanawal, Sumit J. Darak

Abstract: We consider an ad hoc network where multiple users access the same set of channels. The channel characteristics are unknown and could be different for each user (heterogeneous). No controller is available to coordinate channel selections by the users, and if multiple users select the same channel, they collide and none of them receive any rate (or reward). For such a completely decentralized netwo… ▽ More We consider an ad hoc network where multiple users access the same set of channels. The channel characteristics are unknown and could be different for each user (heterogeneous). No controller is available to coordinate channel selections by the users, and if multiple users select the same channel, they collide and none of them receive any rate (or reward). For such a completely decentralized network we develop algorithms that aim to achieve optimal network throughput. Due to lack of any direct communication between the users, we allow each user to exchange information by transmitting in a specific pattern and sense such transmissions from others. However, such transmissions and sensing for information exchange do not add to network throughput. For the wideband sensing and narrowband sensing scenarios, we first develop explore-and-commit algorithms that converge to near-optimal allocation with high probability in a small number of rounds. Building on this, we develop an algorithm that gives logarithmic regret, even when the number of users changes with time. We validate our claims through extensive experiments and show that our algorithms perform significantly better than the state-of-the-art CSM-MAB, dE3 and dE3-TS algorithms. △ Less

Submitted 29 August, 2019; v1 submitted 12 January, 2019; originally announced January 2019.

Comments: Part of this work is accepted for presentation in Infocom 2019 under the title "Distributed Learning and Optimal Assignment in Multiplayer Heterogeneous Networks"

Multi-player Multi-armed Bandits for Stable Allocation in Heterogeneous Ad-Hoc Networks

Authors: Sumit J Darak, Manjesh K. Hanawal

Abstract: Next generation networks are expected to be ultradense and aim to explore spectrum sharing paradigm that allows users to communicate in licensed, shared as well as unlicensed spectrum. Such ultra-dense networks will incur significant signaling load at base stations leading to a negative effect on spectrum and energy efficiency. To minimize signaling overhead, an adhoc approach is being considered… ▽ More Next generation networks are expected to be ultradense and aim to explore spectrum sharing paradigm that allows users to communicate in licensed, shared as well as unlicensed spectrum. Such ultra-dense networks will incur significant signaling load at base stations leading to a negative effect on spectrum and energy efficiency. To minimize signaling overhead, an adhoc approach is being considered for users communicating in the unlicensed and shared spectrums. For such users, decisions need to be completely decentralized as: 1) No communication between users and signaling from the base station is possible which necessitates independent channel selection at each user. A collision occurs when multiple users transmit simultaneously on the same channel, 2) Channel qualities may be heterogeneous, i.e., they are not same across all users, and moreover, are unknown, and 3) The network could be dynamic where users can enter or leave anytime. We develop a multi-armed bandit based distributed algorithm for static networks and extend it for the dynamic networks. The algorithms aim to achieve stable orthogonal allocation (SOC) in finite time and meet the above three constraints with two novel characteristics: 1) Low complexity narrowband radio compared to wideband radio in existing works, and 2) Epoch-less approach for dynamic networks. We establish a convergence of our algorithms to SOC and validate via extensive simulation experiments. △ Less

Submitted 10 July, 2019; v1 submitted 24 December, 2018; originally announced December 2018.

Comments: Accepted in IEEE JSAC Special Issue on Machine Learning in Wireless Communications

Distributed Learning Algorithms for Opportunistic Spectrum Access in Infrastructure-less Networks

Authors: Rohit Kumar, Sumit J. Darak, Manjesh K. Hanawal, Ankit Yadav

Abstract: An opportunistic spectrum access (OSA) for the infrastructure-less (or cognitive ad-hoc) network has received significant attention thanks to emerging paradigms such as the Internet of Things (IoTs) and smart grids. Research in this area has evolved from the \r{ho}rand algorithm requiring prior knowledge of the number of active secondary users (SUs) to the musical chair (MC) algorithm where the nu… ▽ More An opportunistic spectrum access (OSA) for the infrastructure-less (or cognitive ad-hoc) network has received significant attention thanks to emerging paradigms such as the Internet of Things (IoTs) and smart grids. Research in this area has evolved from the \r{ho}rand algorithm requiring prior knowledge of the number of active secondary users (SUs) to the musical chair (MC) algorithm where the number of SUs are unknown and estimated independently at each SU. These works ignore the number of collisions in the network leading to wastage of power and bring down the effective life of battery operated SUs. In this paper, we develop algorithms for OSA that learn faster and incurs fewer number of collisions i.e. energy efficient. We consider two types of infrastructure-less decentralized networks: 1) static network where the number of SUs are fixed but unknown, and 2) dynamic network where SUs can independently enter or leave the network. We set up the problem as a multi-player mult-armed bandit and develop two distributed algorithms. The analysis shows that when all the SUs independently implement the proposed algorithms, the loss in throughput compared to the optimal throughput, i.e. regret, is a constant with high probability and significantly outperforms existing algorithms both in terms of regret and number of collisions. Fewer collisions make them ideally suitable for battery operated SU terminals. We validate our claims through exhaustive simulated experiments as well as through a realistic USRP based experiments in a real radio environment. △ Less

Submitted 6 October, 2018; originally announced October 2018.

Multi-Player Bandits: A Trekking Approach

Authors: Manjesh K. Hanawal, Sumit J. Darak

Abstract: We study stochastic multi-armed bandits with many players. The players do not know the number of players, cannot communicate with each other and if multiple players select a common arm they collide and none of them receive any reward. We consider the static scenario, where the number of players remains fixed, and the dynamic scenario, where the players enter and leave at any time. We provide algor… ▽ More We study stochastic multi-armed bandits with many players. The players do not know the number of players, cannot communicate with each other and if multiple players select a common arm they collide and none of them receive any reward. We consider the static scenario, where the number of players remains fixed, and the dynamic scenario, where the players enter and leave at any time. We provide algorithms based on a novel `trekking approach' that guarantees constant regret for the static case and sub-linear regret for the dynamic case with high probability. The trekking approach eliminates the need to estimate the number of players resulting in fewer collisions and improved regret performance compared to the state-of-the-art algorithms. We also develop an epoch-less algorithm that eliminates any requirement of time synchronization across the players provided each player can detect the presence of other players on an arm. We validate our theoretical guarantees using simulation based and real test-bed based experiments. △ Less

Submitted 17 September, 2018; originally announced September 2018.

Throughput Optimized Non-Contiguous Wideband Spectrum Sensing via Online Learning and Sub-Nyquist Sampling

Authors: Himani Joshi, Sumit J Darak, A Anil Kumar, Rohit Kumar

Abstract: In this paper, we consider non-contiguous wideband spectrum sensing (WSS) for spectrum characterization and allocation in next generation heterogeneous networks. The proposed WSS consists of sub-Nyquist sampling and digital reconstruction to sense multiple non-contiguous frequency bands. Since the throughput (i.e. the number of vacant bands) increases while the probability of successful reconstruc… ▽ More In this paper, we consider non-contiguous wideband spectrum sensing (WSS) for spectrum characterization and allocation in next generation heterogeneous networks. The proposed WSS consists of sub-Nyquist sampling and digital reconstruction to sense multiple non-contiguous frequency bands. Since the throughput (i.e. the number of vacant bands) increases while the probability of successful reconstruction decreases with increase in the number of sensed bands, we develop an online learning algorithm to characterize and select frequency bands based on their spectrum statistics. We guarantee that the proposed algorithm allows sensing of maximum possible number of frequency bands and hence, it is referred to as throughput optimized WSS. We also provide a lower bound on the number of time slots required to characterize spectrum statistics. Simulation and experimental results in the real radio environment show that the performance of the proposed approach converges to that of Myopic approach which has prior knowledge of spectrum statistics. △ Less

Submitted 16 September, 2018; originally announced September 2018.

Learning to Coordinate in a Decentralized Cognitive Radio Network in Presence of Jammers

Authors: Suneet Sawant, Rohit Kumar, Manjesh K. Hanawal, Sumit J. Darak

Abstract: Efficient utilization of licensed spectrum in the cognitive radio network is challenging due to lack of coordination among the Secondary Users (SUs). Distributed algorithms proposed in the literature aim to maximize the network throughput by ensuring orthogonal channel allocation for the SUs. However, these algorithms work under the assumption that all the SUs faithfully follow the algorithms whic… ▽ More Efficient utilization of licensed spectrum in the cognitive radio network is challenging due to lack of coordination among the Secondary Users (SUs). Distributed algorithms proposed in the literature aim to maximize the network throughput by ensuring orthogonal channel allocation for the SUs. However, these algorithms work under the assumption that all the SUs faithfully follow the algorithms which may not always hold due to the decentralized nature of the network. In this paper, we study distributed algorithms that are robust against malicious behavior (jamming attack). We consider both the cases of jammers launching coordinated and uncoordinated attacks. In the coordinated attack, the jammers select non-overlap** channels to attack in each time slot and can significantly increase the number of collisions for SUs. We setup the problem in each scenario as a multi-player bandit and develop algorithms. The analysis shows that when the SUs faithfully implement proposed algorithms, the regret is constant with high probability. We validate our claims through exhaustive synthetic experiments and also through a realistic USRP based experiments. △ Less

Submitted 16 November, 2018; v1 submitted 19 March, 2018; originally announced March 2018.

Comments: Conference version published in WiOpt 2018 (https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8362853)

FPGA Implementation of High Speed Reconfigurable Filter Bank for Multi-standard Wireless Communication Receivers

Authors: Sasha Garg, S. J. Darak

Abstract: In next generation wireless communication system, wireless transceivers should be able to handle wideband input signals compromising of multiple communication standards.Such multi-standard wireless communication receivers (MWCRs) need filter bank to extract the desired signal of interest from wideband input spectrum and bring it to the baseband for further signal processing tasks such as spectrum… ▽ More In next generation wireless communication system, wireless transceivers should be able to handle wideband input signals compromising of multiple communication standards.Such multi-standard wireless communication receivers (MWCRs) need filter bank to extract the desired signal of interest from wideband input spectrum and bring it to the baseband for further signal processing tasks such as spectrum sensing, modulation classification,demodulation etc.In MWCRs,rather any wireless receivers, modulated filter banks, such as Discrete Fourier Transform Filter Banks (DFTFB), are preferred due to their advantages such as lower area, delay and power requirements. To support multi-standard operation, reconfigurable DFTFB (RDFTFB) was proposed by integrating DFTFB with the coefficient decimation method. In this paper, an efficient high speed implementation of RDFTFB on Virtex-7 field programmable gate arrays (FPGA) has been proposed.The proposed approach minimizes the critical path delay between clocked registers thereby leading to significant improvement in the maximum operating frequency of the RDFTFB. Numerically, the proposed implementation leads to 89.7% improvement in the maximum frequency at which RDFTFB can be clocked.Furthermore,proposed implementation leads to 18.5% reduction in the dynamic power consumption. △ Less

Submitted 15 September, 2016; originally announced September 2016.

Comments: 20th IEEE VLSI Design and Test Symposium (VDAT-2016)

A Low Complexity Spectrum Sensing Scheme for Estimating Frequency Band Edges in Multi-Standard Military Communication Receivers

Authors: S. J. Darak, A. P. Vinod, E. M-K. Lai

Abstract: In a typical multi-standard military communication receiver, fast and reliable spectrum sensing unit is required to extract the information of multiple channels (frequency bands) present in a wideband input signal. In this paper, an energy detector based on our reconfigurable filter bank, in [5], for detecting the edge frequencies of the channels is proposed. Simulation results are presented to sh… ▽ More In a typical multi-standard military communication receiver, fast and reliable spectrum sensing unit is required to extract the information of multiple channels (frequency bands) present in a wideband input signal. In this paper, an energy detector based on our reconfigurable filter bank, in [5], for detecting the edge frequencies of the channels is proposed. Simulation results are presented to show the trade-off between the time required to calculate edge frequencies of all the channels and the maximum normalized error in estimating the edge frequencies. The proposed method is compared with existing energy detector methods for complexity and performance. It is shown that, for a fixed number of input samples, error decreases with time in the proposed algorithm as compared to other methods where error is constant. Design examples and simulations show that the complexity of the proposed method is lower than the other methods for a given error in estimating the edge frequencies △ Less

Submitted 14 August, 2016; originally announced August 2016.

Comments: nternational Conference on Communication, Science and Information Engineering (CCSIE) , London

Design of Variable Bandpass Filters Using First Order Allpass Transformation And Coefficient Decimation

Authors: S. J. Darak, A. P. Vinod, E. M-K. Lai

Abstract: In this paper, the design of a computationally efficient variable bandpass digital filter is presented. The center frequency and bandwidth of this filter can be changed online without updating the filter coefficients. The warped filters, obtained by replacing each unit delay of a digital filter with an allpass filter, are widely used for various audio processing applications. However, warped filte… ▽ More In this paper, the design of a computationally efficient variable bandpass digital filter is presented. The center frequency and bandwidth of this filter can be changed online without updating the filter coefficients. The warped filters, obtained by replacing each unit delay of a digital filter with an allpass filter, are widely used for various audio processing applications. However, warped filters fail to provide variable bandwidth bandpass responses for a given center frequency using first order allpass transformation. To overcome this drawback, our design is accomplished by combining warped filter with the coefficient decimation technique. The design example shows that the proposed variable digital filter is simple to design and offers a total gate count reduction of 36% and 65% over the warped filters compared to the designs presented in [3] and [1] respectively △ Less

Submitted 14 August, 2016; originally announced August 2016.

Comments: 18th Electronics New Zealand Conference (ENZCON)