-
Irradiation Facilities and Irradiation Methods for High Power Target
Authors:
F. Pellemoine,
C. Barbier,
Y. Sun,
K. Ammigan,
S. Bidhar,
B. Zwaska,
D. McClintock,
S. Taller,
D. Winder,
C. S. Cutler,
D. Kim,
Y. Chiu,
M. Freer,
C. Wheldon,
A. Gottberg,
F. Boix Pamies,
M. Calviani,
N. Charitonidis,
R. Garcia Alia,
F. Ravotti,
S. Danzeca,
A. P. Bernardes,
N. Moncoffre,
S. Meigo,
T. Ishida
, et al. (16 additional authors not shown)
Abstract:
High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified…
▽ More
High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified as the leading cross-cutting challenges of high-power target facilities. Target material R&D to address these challenges are essential to enable and ensure reliable operation of future-generation accelerators. Irradiation facilities and alternative methods are critical to provide a full support of material R&D and better address these critical challenges.
△ Less
Submitted 14 December, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Further studies on the physics potential of an experiment using LHC neutrinos
Authors:
N. Beni,
M. Brucoli,
V. Cafaro,
F. Cerutti,
G. M. Dallavalle,
S. Danzeca,
A. DeRoeck,
A. De Rujula,
D. Fasanella,
V. Giordano,
C. Guandalini,
A. Ioannisyan,
D. Lazic,
A. Margotti,
S. Lo Meo,
F. L. Navarria,
L. Patrizii,
T. Rovelli,
M. Sabate-Gilarte,
F. Sanchez Galan,
P. Santos Diaz,
G. Sirri,
Z. Szillasi,
C. -E. Wulz
Abstract:
We discuss an experiment to investigate neutrino physics at the LHC in Run 3, with emphasis on tau flavour. As described in our previous paper [arXiv:1903.06564v1], the detector can be installed in the decommissioned TI18 tunnel, about 480 m downstream the ATLAS cavern, after the first bending dipoles of the LHC arc. In that location, the prolongation of the beam Line-of-Sight from Interaction Poi…
▽ More
We discuss an experiment to investigate neutrino physics at the LHC in Run 3, with emphasis on tau flavour. As described in our previous paper [arXiv:1903.06564v1], the detector can be installed in the decommissioned TI18 tunnel, about 480 m downstream the ATLAS cavern, after the first bending dipoles of the LHC arc. In that location, the prolongation of the beam Line-of-Sight from Interaction Point IP1 to TI18 traverses about 100 m of rock. The detector intercepts the intense neutrino flux, generated by the LHC beams colliding in IP1, at large pseudorapidity eta, where neutrino energies can exceed a TeV. This paper focuses on optimizing global features of the experiment, like detector mass and acceptance. Since the neutrino-nucleon interaction cross section grows almost linearly with energy, the detector can be light and still collect a considerable sample of neutrino events; in the present study it weighs less than 3 tons. The detector is positioned off the beam axis, slightly above the ideal prolongation of the LHC beam from the straight section, covering 7.4 < eta < 9.2. In this configuration, the flux at high energies (0.5-1.5 TeV and beyond) is found to be dominated by neutrinos originating directly from IP1, mostly from charm decays, of which about 50% are electron neutrinos and about 5% are tau neutrinos. The contribution of pion and kaon decays to the muon neutrino flux is studied by means of simulations that embed the LHC optics and found small at high energies. The above studies indicate that with 150 /fb of delivered LHC luminosity in Run 3 the experiment can record a few thousand very high energy neutrino charged current interactions and over 50 tau neutrino charged current events.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Technical Proposal: FASERnu
Authors:
FASER Collaboration,
Henso Abreu,
Marco Andreini,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Caterina Bertone,
Jamie Boyd,
Andy Buckley,
Franck Cadoux,
David W. Casper,
Francesco Cerutti,
Xin Chen,
Andrea Coccaro,
Salvatore Danzeca,
Liam Dougherty,
Candan Dozen,
Peter B. Denton,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Jonathan Gall,
Iftah Galon,
Stephen Gibson
, et al. (47 additional authors not shown)
Abstract:
FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutri…
▽ More
FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutrinos, and 20 tau neutrinos will interact in FASERnu with TeV-scale energies. With the ability to observe these interactions, reconstruct their energies, and distinguish flavors, FASERnu will probe the production, propagation, and interactions of neutrinos at the highest human-made energies ever recorded. The FASERnu detector will be composed of 1000 emulsion layers interleaved with tungsten plates. The total volume of the emulsion and tungsten is 25cm x 25cm x 1.35m, and the tungsten target mass is 1.2 tonnes. From 2021-23, 7 sets of emulsion layers will be installed, with replacement roughly every 20-50 1/fb in planned Technical Stops. In this document, we summarize FASERnu's physics goals and discuss the estimates of neutrino flux and interaction rates. We then describe the FASERnu detector in detail, including plans for assembly, transport, installation, and emulsion replacement, and procedures for emulsion readout and analyzing the data. We close with cost estimates for the detector components and infrastructure work and a timeline for the experiment.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Physics Potential of an Experiment using LHC Neutrinos
Authors:
N. Beni,
M. Brucoli,
S. Buontempo,
V. Cafaro,
G . M. Dallavalle,
S. Danzeca,
G. De Lellis,
A. Di Crescenzo,
V. Giordano,
C. Guandalini,
D. Lazic,
S. Lo Meo,
F. L. Navarria,
Z. Szillasi
Abstract:
Production of neutrinos is abundant at LHC. Flavour composition and energy reach of the neutrino flux from proton-proton collisions depend on the pseudorapidity $η$. At large $η$, energies can exceed the TeV, with a sizeable contribution of the $τ$ flavour. A dedicated detector could intercept this intense neutrino flux in the forward direction, and measure the interaction cross section on nucleon…
▽ More
Production of neutrinos is abundant at LHC. Flavour composition and energy reach of the neutrino flux from proton-proton collisions depend on the pseudorapidity $η$. At large $η$, energies can exceed the TeV, with a sizeable contribution of the $τ$ flavour. A dedicated detector could intercept this intense neutrino flux in the forward direction, and measure the interaction cross section on nucleons in the unexplored energy range from a few hundred GeV to a few TeV. The high energies of neutrinos result in a larger $ν$N interaction cross section, and the detector size can be relatively small. Machine backgrounds vary rapidly while moving along and away from the beam line. Four locations were considered as hosts for a neutrino detector: the CMS quadruplet region (~25 m from CMS Interaction Point (IP)), UJ53 and UJ57 (90 and 120 m from CMS IP), RR53 and RR57 (240 m from CMS IP), TI18 (480 m from ATLAS IP). The potential sites are studied on the basis of (a) expectations for neutrino interaction rates, flavour composition and energy spectrum, (b) predicted backgrounds and in-situ measurements, performed with a nuclear emulsion detector and radiation monitors. TI18 emerges as the most favourable location. A small detector in TI18 could measure, for the first time, the high-energy $ν$N cross section, and separately for $τ$ neutrinos, with good precision, already with 300 fb$^{-1}$ in the LHC Run3.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
Technical Proposal for FASER: ForwArd Search ExpeRiment at the LHC
Authors:
FASER Collaboration,
Akitaka Ariga,
Tomoko Ariga,
Jamie Boyd,
Franck Cadoux,
David W. Casper,
Francesco Cerutti,
Salvatore Danzeca,
Liam Dougherty,
Yannick Favre,
Jonathan L. Feng,
Didier Ferrere,
Jonathan Gall,
Iftah Galon,
Sergio Gonzalez-Sevilla,
Shih-Chieh Hsu,
Giuseppe Iacobucci,
Enrique Kajomovitz,
Felix Kling,
Susanne Kuehn,
Mike Lamont,
Lorne Levinson,
Hidetoshi Otono,
John Osborne,
Brian Petersen
, et al. (11 additional authors not shown)
Abstract:
FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATL…
▽ More
FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATLAS IP in the unused service tunnel TI12 and be sensitive to particles that decay in a cylindrical volume with radius R=10 cm and length L=1.5 m. FASER will complement the LHC's existing physics program, extending its discovery potential to a host of new, light particles, with potentially far-reaching implications for particle physics and cosmology.
This document describes the technical details of the FASER detector components: the magnets, the tracker, the scintillator system, and the calorimeter, as well as the trigger and readout system. The preparatory work that is needed to install and operate the detector, including civil engineering, transport, and integration with various services is also presented. The information presented includes preliminary cost estimates for the detector components and the infrastructure work, as well as a timeline for the design, construction, and installation of the experiment.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
