-
Determining the depairing current in superconducting nanowire single-photon detectors
Authors:
S. Frasca,
B. Korzh,
M. Colangelo,
D. Zhu,
A. E. Lita,
J. P. Allmaras,
E. E. Wollman,
V. B. Verma,
A. E. Dane,
E. Ramirez,
A. D. Beyer,
S. W. Nam,
A. G. Kozorezov,
M. D. Shaw,
K. K. Berggren
Abstract:
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured…
▽ More
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured resonant frequency correspond to the change in the kinetic inductance, which can be compared with theoretical predictions. We demonstrate that the fast relaxation model described in the literature accurately matches our experimental data and provides a valuable tool for direct determination of the depairing current. Accurate and direct measurement of the depairing current is critical for nanowire quality analysis, as well as modeling efforts aimed at understanding the detection mechanism in SNSPDs.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Superconducting nanowire single-photon detector with integrated impedance-matching taper
Authors:
Di Zhu,
Marco Colangelo,
Boris A. Korzh,
Qing-Yuan Zhao,
Simone Frasca,
Andrew E. Dane,
Angel E. Velasco,
Andrew D. Beyer,
Jason P. Allmaras,
Edward Ramirez,
William J. Strickland,
Daniel F. Santavicca,
Matthew D. Shaw,
Karl K. Berggren
Abstract:
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated supercondu…
▽ More
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated superconducting transmission line taper. The taper is a transformer that effectively loads the SNSPD with high impedance without latching. It increases the amplitude of the detector output while preserving the fast rising edge. Using a taper with a starting width of 500 nm, we experimentally observed a 3.6$\times$ higher pulse amplitude, 3.7$\times$ faster slew rate, and 25.1 ps smaller timing jitter. The results match our numerical simulation, which incorporates both the hotspot dynamics in the SNSPD and the distributed nature in the transmission line taper. The taper studied here may become a useful tool to interface high-impedance superconducting nanowire devices to conventional low-impedance circuits.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Demonstrating sub-3 ps temporal resolution in a superconducting nanowire single-photon detector
Authors:
B. A. Korzh,
Q-Y. Zhao,
S. Frasca,
J. P. Allmaras,
T. M. Autry,
E. A. Bersin,
M. Colangelo,
G. M. Crouch,
A. E. Dane,
T. Gerrits,
F. Marsili,
G. Moody,
E. Ramirez,
J. D. Rezac,
M. J. Stevens,
E. E. Wollman,
D. Zhu,
P. D. Hale,
K. L. Silverman,
R. P. Mirin,
S. W. Nam,
M. D. Shaw,
K. K. Berggren
Abstract:
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs…
▽ More
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the highest efficiency time-resolving single-photon counting detectors available in the near infrared. As the detection mechanism in SNSPDs occurs on picosecond time scales, SNSPDs have been demonstrated with exquisite temporal resolution below 15 ps. We reduce this value to 2.7$\pm$0.2 ps at 400 nm and 4.6$\pm$0.2 ps at 1550 nm, using a specialized niobium nitride (NbN) SNSPD. The observed photon-energy dependence of the temporal resolution and detection latency suggests that intrinsic effects make a significant contribution.
△ Less
Submitted 18 April, 2018;
originally announced April 2018.
-
A scalable multi-photon coincidence detector based on superconducting nanowires
Authors:
Di Zhu,
Qing-Yuan Zhao,
Hyeongrak Choi,
Tsung-Ju Lu,
Andrew E. Dane,
Dirk R. Englund,
Karl K. Berggren
Abstract:
Coincidence detection of single photons is crucial in numerous quantum technologies and usually requires multiple time-resolved single-photon detectors. However, the electronic readout becomes a major challenge when the measurement basis scales to large numbers of spatial modes. Here, we address this problem by introducing a two-terminal coincidence detector that enables scalable readout of an arr…
▽ More
Coincidence detection of single photons is crucial in numerous quantum technologies and usually requires multiple time-resolved single-photon detectors. However, the electronic readout becomes a major challenge when the measurement basis scales to large numbers of spatial modes. Here, we address this problem by introducing a two-terminal coincidence detector that enables scalable readout of an array of detector segments based on superconducting nanowire microstrip transmission line. Exploiting timing logic, we demonstrate a 16-element detector that resolves all 136 possible single-photon and two-photon coincidence events. We further explore the pulse shapes of the detector output and resolve up to four-photon coincidence events in a 4-element device, giving the detector photon-number-resolving capability. This new detector architecture and operating scheme will be particularly useful for multi-photon coincidence detection in large-scale photonic integrated circuits.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
A compact superconducting nanowire memory element operated by nanowire cryotrons
Authors:
Qing-Yuan Zhao,
Emily A. Toomey,
Brenden A. Butters,
Adam N. McCaughan,
Andrew E. Dane,
Sae-Woo Nam,
Karl K. Berggren
Abstract:
A superconducting loop stores persistent current without any ohmic loss, making it an ideal platform for energy efficient memories. Conventional superconducting memories use an architecture based on Josephson junctions (JJs) and have demonstrated access times less than 10 ps and power dissipation as low as $10^{-19}$ J. However, their scalability has been slow to develop due to the challenges in r…
▽ More
A superconducting loop stores persistent current without any ohmic loss, making it an ideal platform for energy efficient memories. Conventional superconducting memories use an architecture based on Josephson junctions (JJs) and have demonstrated access times less than 10 ps and power dissipation as low as $10^{-19}$ J. However, their scalability has been slow to develop due to the challenges in reducing the dimensions of JJs and minimizing the area of the superconducting loops. In addition to the memory itself, complex readout circuits require additional JJs and inductors for coupling signals, increasing the overall area. Here, we have demonstrated a superconducting memory based solely on lithographic nanowires. The small dimensions of the nanowire ensure that the device can be fabricated in a dense area in multiple layers, while the high kinetic inductance makes the loop essentially independent of geometric inductance, allowing it to be scaled down without sacrificing performance. The memory is operated by a group of nanowire cryotrons patterned alongside the storage loop, enabling us to reduce the entire memory cell to 3 μm $\times $ 7 μm in our proof-of-concept device. In this work we present the operation principles of a superconducting nanowire memory (nMem) and characterize its bit error rate, speed, and power dissipation.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
-
A nanoCryotron comparator can connect single-flux quantum circuits to conventional electronics
Authors:
Qing-Yuan Zhao,
Adam N. McCaughan,
Andrew E. Dane,
Karl K. Berggren,
Thomas Ortlepp
Abstract:
Integration with conventional electronics offers a straightforward and economical approach to upgrading existing superconducting technologies, such as scaling up superconducting detectors into large arrays and combining single flux quantum (SFQ) digital circuits with semiconductor logic and memories. However, direct output signals from superconducting devices (e.g., Josephson junctions) are usuall…
▽ More
Integration with conventional electronics offers a straightforward and economical approach to upgrading existing superconducting technologies, such as scaling up superconducting detectors into large arrays and combining single flux quantum (SFQ) digital circuits with semiconductor logic and memories. However, direct output signals from superconducting devices (e.g., Josephson junctions) are usually not compatible with the input requirements of conventional devices (e.g., transistors). Here, we demonstrate the use of a single three-terminal superconducting-nanowire device, called the nanocryotron (nTron), as a digital comparator to combine SFQ circuits with mature semiconductor circuits such as complementary metal oxide semiconductor (CMOS) circuits. Since SFQ circuits can digitize output signals from general superconducting devices and CMOS circuits can interface existing CMOS-compatible electronics, our results demonstrate the feasibility of a general architecture that uses an nTron as an interface to realize a super-hybrid system consisting of superconducting detectors, superconducting quantum electronics, CMOS logic and memories, and other conventional electronics.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
A Single-Photon Imager Based on Microwave Plasmonic Superconducting Nanowire
Authors:
Qing-Yuan Zhao,
Di Zhu,
Niccolò Calandri,
Andrew E. Dane,
Adam N. McCaughan,
Francesco Bellei,
Hao-Zhu Wang,
Daniel F. Santavicca,
Karl K. Berggren
Abstract:
Detecting spatial and temporal information of individual photons by using single-photon-detector (SPD) arrays is critical to applications in spectroscopy, communication, biological imaging, astronomical observation, and quantum-information processing. Among the current SPDs1,detectors based on superconducting nanowires have outstanding performance2, but are limited in their ability to be integrate…
▽ More
Detecting spatial and temporal information of individual photons by using single-photon-detector (SPD) arrays is critical to applications in spectroscopy, communication, biological imaging, astronomical observation, and quantum-information processing. Among the current SPDs1,detectors based on superconducting nanowires have outstanding performance2, but are limited in their ability to be integrated into large scale arrays due to the engineering difficulty of high-bandwidth cryogenic electronic readout3-8. Here, we address this problem by demonstrating a scalable single-photon imager using a single continuous photon-sensitive superconducting nanowire microwave-plasmon transmission line. By appropriately designing the nanowire's local electromagnetic environment so that the nanowire guides microwave plasmons, the propagating voltages signals generated by a photon-detection event were slowed down to ~ 2% of the speed of light. As a result, the time difference between arrivals of the signals at the two ends of the nanowire naturally encoded the position and time of absorption of the photon. Thus, with only two readout lines, we demonstrated that a 19.7-mm-long nanowire meandered across an area of 286 μm * 193 μm was capable of resolving ~590 effective pixels while simultaneously recording the arrival times of photons with a temporal resolution of 50 ps. The nanowire imager presents a scalable approach to realizing high-resolution photon imaging in time and space.
△ Less
Submitted 28 July, 2016; v1 submitted 27 May, 2016;
originally announced May 2016.
-
Free space-coupled superconducting nanowire single photon detectors for infrared optical communications
Authors:
Francesco Bellei,
Alyssa P. Cartwright,
Adam N. McCaughan,
Andrew E. Dane,
Faraz Najafi,
Quinyuan Zhao,
Karl K. Berggren
Abstract:
This paper describes the construction of a cryostat and an optical system with a free-space coupling efficiency of 56.5% +/- 3.4% to a superconducting nanowire single-photon detector (SNSPD) for infrared quantum communication and spectrum analysis. A 1K pot decreases the base temperature to T = 1.7 K from the 2.9 K reached by the cold head cooled by a pulse-tube cryocooler. The minimum spot size c…
▽ More
This paper describes the construction of a cryostat and an optical system with a free-space coupling efficiency of 56.5% +/- 3.4% to a superconducting nanowire single-photon detector (SNSPD) for infrared quantum communication and spectrum analysis. A 1K pot decreases the base temperature to T = 1.7 K from the 2.9 K reached by the cold head cooled by a pulse-tube cryocooler. The minimum spot size coupled to the detector chip was 6.6 +/- 0.11 μm starting from a fiber source at wavelength, λ = 1.55 μm. We demonstrated efficient photon counting on a detector with an 8 x 7.3 μm^2 area. We measured a dark count rate of 95 +/- 3.35 kcps and a system detection efficiency of 1.64% +/- 0.13%. We explain the key steps that are required to further improve the coupling efficiency.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Infrared Transmissometer to Measure the Thickness of NbN Thin Films
Authors:
Kristen A. Sunter,
Andrew E. Dane,
Christopher I. Lang,
Karl K. Berggren
Abstract:
We present an optical setup that can be used to characterize the thicknesses of thin NbN films to screen samples for fabrication and to better model the performance of the resulting superconducting nanowire single photon detectors. The infrared transmissometer reported here is easy to use, gives results within minutes and is non-destructive. Thus, the thickness measurement can be easily integrated…
▽ More
We present an optical setup that can be used to characterize the thicknesses of thin NbN films to screen samples for fabrication and to better model the performance of the resulting superconducting nanowire single photon detectors. The infrared transmissometer reported here is easy to use, gives results within minutes and is non-destructive. Thus, the thickness measurement can be easily integrated into the workflow of deposition and characterization. Comparison to a similar visible-wavelength transmissometer is provided.
△ Less
Submitted 24 March, 2015;
originally announced March 2015.
-
Universal scaling of the critical temperature for thin films near the superconducting-to-insulating transition
Authors:
Yachin Ivry,
Chung-Soo Kim,
Andrew E. Dane,
Domenico De Fazio,
Adam McCaughan,
Kristen A. Sunter,
Qingyuan Zhao,
Karl K. Berggren
Abstract:
Thin superconducting films form a unique platform for geometrically-confined, strongly-interacting electrons. They allow an inherent competition between disorder and superconductivity, which in turn enables the intriguing superconducting-to-insulator transition and believed to facilitate the comprehension of high-Tc superconductivity. Furthermore, understanding thin film superconductivity is techn…
▽ More
Thin superconducting films form a unique platform for geometrically-confined, strongly-interacting electrons. They allow an inherent competition between disorder and superconductivity, which in turn enables the intriguing superconducting-to-insulator transition and believed to facilitate the comprehension of high-Tc superconductivity. Furthermore, understanding thin film superconductivity is technologically essential e.g. for photo-detectors, and quantum-computers. Consequently, the absence of an established universal relationships between critical temperature ($T_c$), film thickness ($d$) and sheet resistance ($R_s$) hinders both our understanding of the onset of the superconductivity and the development of miniaturised superconducting devices. We report that in thin films, superconductivity scales as $d^.$$T_c(R_s)$. We demonstrated this scaling by analysing the data published over the past 46 years for different materials (and facilitated this database for further analysis). Moreover, we experimentally confirmed the discovered scaling for NbN films, quantified it with a power law, explored its possible origin and demonstrated its usefulness for superconducting film-based devices.
△ Less
Submitted 15 September, 2014; v1 submitted 22 July, 2014;
originally announced July 2014.