Showing 1–42 of 42 results for author: Daly, M

Language Models in Dialogue: Conversational Maxims for Human-AI Interactions

Authors: Erik Miehling, Manish Nagireddy, Prasanna Sattigeri, Elizabeth M. Daly, David Piorkowski, John T. Richards

Abstract: Modern language models, while sophisticated, exhibit some inherent shortcomings, particularly in conversational settings. We claim that many of the observed shortcomings can be attributed to violation of one or more conversational principles. By drawing upon extensive research from both the social science and AI communities, we propose a set of maxims -- quantity, quality, relevance, manner, benev… ▽ More Modern language models, while sophisticated, exhibit some inherent shortcomings, particularly in conversational settings. We claim that many of the observed shortcomings can be attributed to violation of one or more conversational principles. By drawing upon extensive research from both the social science and AI communities, we propose a set of maxims -- quantity, quality, relevance, manner, benevolence, and transparency -- for describing effective human-AI conversation. We first justify the applicability of the first four maxims (from Grice) in the context of human-AI interactions. We then argue that two new maxims, benevolence (concerning the generation of, and engagement with, harmful content) and transparency (concerning recognition of one's knowledge boundaries, operational constraints, and intents), are necessary for addressing behavior unique to modern human-AI interactions. We evaluate the degree to which various language models are able to understand these maxims and find that models possess an internal prioritization of principles that can significantly impact their ability to interpret the maxims accurately. △ Less

Submitted 22 June, 2024; v1 submitted 22 March, 2024; originally announced March 2024.

Detectors for Safe and Reliable LLMs: Implementations, Uses, and Limitations

Authors: Swapnaja Achintalwar, Adriana Alvarado Garcia, Ateret Anaby-Tavor, Ioana Baldini, Sara E. Berger, Bishwaranjan Bhattacharjee, Djallel Bouneffouf, Subhajit Chaudhury, Pin-Yu Chen, Lamogha Chiazor, Elizabeth M. Daly, Kirushikesh DB, Rogério Abreu de Paula, Pierre Dognin, Eitan Farchi, Soumya Ghosh, Michael Hind, Raya Horesh, George Kour, Ja Young Lee, Nishtha Madaan, Sameep Mehta, Erik Miehling, Keerthiram Murugesan, Manish Nagireddy , et al. (13 additional authors not shown)

Abstract: Large language models (LLMs) are susceptible to a variety of risks, from non-faithful output to biased and toxic generations. Due to several limiting factors surrounding LLMs (training cost, API access, data availability, etc.), it may not always be feasible to impose direct safety constraints on a deployed model. Therefore, an efficient and reliable alternative is required. To this end, we presen… ▽ More Large language models (LLMs) are susceptible to a variety of risks, from non-faithful output to biased and toxic generations. Due to several limiting factors surrounding LLMs (training cost, API access, data availability, etc.), it may not always be feasible to impose direct safety constraints on a deployed model. Therefore, an efficient and reliable alternative is required. To this end, we present our ongoing efforts to create and deploy a library of detectors: compact and easy-to-build classification models that provide labels for various harms. In addition to the detectors themselves, we discuss a wide range of uses for these detector models - from acting as guardrails to enabling effective AI governance. We also deep dive into inherent challenges in their development and discuss future work aimed at making the detectors more reliable and broadening their scope. △ Less

Submitted 13 June, 2024; v1 submitted 9 March, 2024; originally announced March 2024.

Remixing Music for Hearing Aids Using Ensemble of Fine-Tuned Source Separators

Authors: Matthew Daly

Abstract: This paper introduces our system submission for the Cadenza ICASSP 2024 Grand Challenge, which presents the problem of remixing and enhancing music for hearing aid users. Our system placed first in the challenge, achieving the best average Hearing-Aid Audio Quality Index (HAAQI) score on the evaluation data set. We describe the system, which uses an ensemble of deep learning music source separator… ▽ More This paper introduces our system submission for the Cadenza ICASSP 2024 Grand Challenge, which presents the problem of remixing and enhancing music for hearing aid users. Our system placed first in the challenge, achieving the best average Hearing-Aid Audio Quality Index (HAAQI) score on the evaluation data set. We describe the system, which uses an ensemble of deep learning music source separators that are fine tuned on the challenge data. We demonstrate the effectiveness of our system through the challenge results and analyze the importance of different system aspects through ablation studies. △ Less

Submitted 31 January, 2024; v1 submitted 11 January, 2024; originally announced January 2024.

Comments: 2 pages, ICASSP 2024, Cadenza Grand Challenge

Deformation Mechanisms in High Entropy Alloys: A Minireview of Short-Range Order Effects

Authors: Novin Rasooli, Wei Chen, Matthew Daly

Abstract: The complex atomic scale structure of high entropy alloys presents new opportunities to expand the deformation theories of mechanical metallurgy. In this regard, solute-defect interactions have emerged as critical piece in elucidating the operation of deformation mechanisms. While notable progress has been made in understanding solute-defect interactions for random solute arrangements, recent inte… ▽ More The complex atomic scale structure of high entropy alloys presents new opportunities to expand the deformation theories of mechanical metallurgy. In this regard, solute-defect interactions have emerged as critical piece in elucidating the operation of deformation mechanisms. While notable progress has been made in understanding solute-defect interactions for random solute arrangements, recent interest in high entropy alloys with short-range order adds a new layer of structural complexity for which a cohesive picture has yet to emerge. To this end, this minireview synthesizes the current understanding of short-range order effects on defect behavior through an examination of the key recent literature. This analysis centers on the nanoscale metallurgy of deformation mechanisms, with the order-induced changes to the relevant defect energy landscapes serving as a touchstone for discussion. The topics reviewed include dislocation-mediated strengthening, twinning and phase transformation-based mechanisms, and vacancy-mediated processes. This minireview concludes with remarks on current challenges and opportunities for future efforts. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Interpretable Differencing of Machine Learning Models

Authors: Swagatam Haldar, Diptikalyan Saha, Dennis Wei, Rahul Nair, Elizabeth M. Daly

Abstract: Understanding the differences between machine learning (ML) models is of interest in scenarios ranging from choosing amongst a set of competing models, to updating a deployed model with new training data. In these cases, we wish to go beyond differences in overall metrics such as accuracy to identify where in the feature space do the differences occur. We formalize this problem of model differenci… ▽ More Understanding the differences between machine learning (ML) models is of interest in scenarios ranging from choosing amongst a set of competing models, to updating a deployed model with new training data. In these cases, we wish to go beyond differences in overall metrics such as accuracy to identify where in the feature space do the differences occur. We formalize this problem of model differencing as one of predicting a dissimilarity function of two ML models' outputs, subject to the representation of the differences being human-interpretable. Our solution is to learn a Joint Surrogate Tree (JST), which is composed of two conjoined decision tree surrogates for the two models. A JST provides an intuitive representation of differences and places the changes in the context of the models' decision logic. Context is important as it helps users to map differences to an underlying mental model of an AI system. We also propose a refinement procedure to increase the precision of a JST. We demonstrate, through an empirical evaluation, that such contextual differencing is concise and can be achieved with no loss in fidelity over naive approaches. △ Less

Submitted 13 June, 2023; v1 submitted 10 June, 2023; originally announced June 2023.

Comments: UAI 2023

The COMMOTIONS Urban Interactions Driving Simulator Study Dataset

Authors: Aravinda Ramakrishnan Srinivasan, Julian Schumann, Yueyang Wang, Yi-Shin Lin, Michael Daly, Albert Solernou, Arkady Zgonnikov, Matteo Leonetti, Jac Billington, Gustav Markkula

Abstract: Accurate modelling of road user interaction has received lot of attention in recent years due to the advent of increasingly automated vehicles. To support such modelling, there is a need to complement naturalistic datasets of road user interaction with targeted, controlled study data. This paper describes a dataset collected in a simulator study conducted in the project COMMOTIONS, addressing urba… ▽ More Accurate modelling of road user interaction has received lot of attention in recent years due to the advent of increasingly automated vehicles. To support such modelling, there is a need to complement naturalistic datasets of road user interaction with targeted, controlled study data. This paper describes a dataset collected in a simulator study conducted in the project COMMOTIONS, addressing urban driving interactions, in a state of the art moving base driving simulator. The study focused on two types of near-crash situations that can arise in urban driving interactions, and also collected data on human driver gap acceptance across a range of controlled gap sequences. △ Less

Submitted 2 July, 2024; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: 5 pages, 8 figures, 6 tables, data techincal description paper, Open Science Foundation - https://osf.io/eazg5/

Improved Type III solar radio burst detection using congruent deep learning models

Authors: Jeremiah Scully, Ronan Flynn, Peter Gallagher, Eoin Carley, Mark Daly

Abstract: Solar flares are energetic events in the solar atmosphere that are often linked with solar radio bursts (SRBs). SRBs are observed at metric to decametric wavelengths and are classified into five spectral classes (Type I--V) based on their signature in dynamic spectra. The automatic detection and classification of SRBs is a challenge due to their heterogeneous form. Near-realtime detection and clas… ▽ More Solar flares are energetic events in the solar atmosphere that are often linked with solar radio bursts (SRBs). SRBs are observed at metric to decametric wavelengths and are classified into five spectral classes (Type I--V) based on their signature in dynamic spectra. The automatic detection and classification of SRBs is a challenge due to their heterogeneous form. Near-realtime detection and classification of SRBs has become a necessity in recent years due to large data rates generated by advanced radio telescopes such as the LOw Frequency ARray (LOFAR). In this study, we implement congruent deep learning models to automatically detect and classify Type III SRBs. We generated simulated Type III SRBs, which were comparable to Type IIIs seen in real observations, using a deep learning method known as Generative Adversarial Network (GAN). This simulated data was combined with observations from LOFAR to produce a training set that was used to train an object detection model known as YOLOv2 (You Only Look Once). Using this congruent deep learning model system, we can accurately detect Type III SRBs at a mean Average Precision (mAP) value of 77.71%. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Journal ref: A&A 674, A218 (2023)

AutoDOViz: Human-Centered Automation for Decision Optimization

Authors: Daniel Karl I. Weidele, Shazia Afzal, Abel N. Valente, Cole Makuch, Owen Cornec, Long Vu, Dharmashankar Subramanian, Werner Geyer, Rahul Nair, Inge Vejsbjerg, Radu Marinescu, Paulito Palmes, Elizabeth M. Daly, Loraine Franke, Daniel Haehn

Abstract: We present AutoDOViz, an interactive user interface for automated decision optimization (AutoDO) using reinforcement learning (RL). Decision optimization (DO) has classically being practiced by dedicated DO researchers where experts need to spend long periods of time fine tuning a solution through trial-and-error. AutoML pipeline search has sought to make it easier for a data scientist to find the… ▽ More We present AutoDOViz, an interactive user interface for automated decision optimization (AutoDO) using reinforcement learning (RL). Decision optimization (DO) has classically being practiced by dedicated DO researchers where experts need to spend long periods of time fine tuning a solution through trial-and-error. AutoML pipeline search has sought to make it easier for a data scientist to find the best machine learning pipeline by leveraging automation to search and tune the solution. More recently, these advances have been applied to the domain of AutoDO, with a similar goal to find the best reinforcement learning pipeline through algorithm selection and parameter tuning. However, Decision Optimization requires significantly more complex problem specification when compared to an ML problem. AutoDOViz seeks to lower the barrier of entry for data scientists in problem specification for reinforcement learning problems, leverage the benefits of AutoDO algorithms for RL pipeline search and finally, create visualizations and policy insights in order to facilitate the typical interactive nature when communicating problem formulation and solution proposals between DO experts and domain experts. In this paper, we report our findings from semi-structured expert interviews with DO practitioners as well as business consultants, leading to design requirements for human-centered automation for DO with RL. We evaluate a system implementation with data scientists and find that they are significantly more open to engage in DO after using our proposed solution. AutoDOViz further increases trust in RL agent models and makes the automated training and evaluation process more comprehensible. As shown for other automation in ML tasks, we also conclude automation of RL for DO can benefit from user and vice-versa when the interface promotes human-in-the-loop. △ Less

Submitted 19 February, 2023; originally announced February 2023.

Training performance of Nb3Sn Rutherford cables in a channel with a wide range of impregnation materials

Authors: S. Otten, A. Kario, W. A. J. Wessel. J. Leferink, H. H. J. ten Kate, M. Daly, C. Hug, S. Sidorov, A. Brem, B. Auchmann, P. Studer, T. Tervoort

Abstract: Training of accelerator magnets is a costly and time consuming process. The number of training quenches must therefore be reduced to a minimum. We investigate training of impregnated Nb3Sn Rutherford cable in a small-scale experiment. The test involves a Rutherford cable impregnated in a meandering channel simulating the environment of a canted-cosine-theta (CCT) coil. The sample is powered using… ▽ More Training of accelerator magnets is a costly and time consuming process. The number of training quenches must therefore be reduced to a minimum. We investigate training of impregnated Nb3Sn Rutherford cable in a small-scale experiment. The test involves a Rutherford cable impregnated in a meandering channel simulating the environment of a canted-cosine-theta (CCT) coil. The sample is powered using a transformer and the Lorentz force is generated by an externally applied magnetic field. The low material and helium consumption enable the test of a larger number of samples. In this article, we present training of samples impregnated with alumina-filled epoxy resins, a modified resin with paraffin-like mechanical properties, and a new tough resin in development at ETH Zürich. These new data are compared with previous results published earlier. Compared to samples with unfilled epoxy resin, those with alumina-filled epoxy show favorable training properties with higher initial quench currents and fewer training quenches before reaching 80% of the critical current. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 4 pages, 6 figures. Submitted to IEEE Transactions on Applied Superconductivity (TAS) for publication in the ASC2022 special issue. Copyright of the article was transferred to IEEE by submission

On the Safety of Interpretable Machine Learning: A Maximum Deviation Approach

Authors: Dennis Wei, Rahul Nair, Amit Dhurandhar, Kush R. Varshney, Elizabeth M. Daly, Moninder Singh

Abstract: Interpretable and explainable machine learning has seen a recent surge of interest. We focus on safety as a key motivation behind the surge and make the relationship between interpretability and safety more quantitative. Toward assessing safety, we introduce the concept of maximum deviation via an optimization problem to find the largest deviation of a supervised learning model from a reference mo… ▽ More Interpretable and explainable machine learning has seen a recent surge of interest. We focus on safety as a key motivation behind the surge and make the relationship between interpretability and safety more quantitative. Toward assessing safety, we introduce the concept of maximum deviation via an optimization problem to find the largest deviation of a supervised learning model from a reference model regarded as safe. We then show how interpretability facilitates this safety assessment. For models including decision trees, generalized linear and additive models, the maximum deviation can be computed exactly and efficiently. For tree ensembles, which are not regarded as interpretable, discrete optimization techniques can still provide informative bounds. For a broader class of piecewise Lipschitz functions, we leverage the multi-armed bandit literature to show that interpretability produces tighter (regret) bounds on the maximum deviation. We present case studies, including one on mortgage approval, to illustrate our methods and the insights about models that may be obtained from deviation maximization. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Comments: Published at NeurIPS 2022

ColorCode: A Bayesian Approach to Augmentative and Alternative Communication with Two Buttons

Authors: Matthew Daly

Abstract: Many people with severely limited muscle control can only communicate through augmentative and alternative communication (AAC) systems with a small number of buttons. In this paper, we present the design for ColorCode, which is an AAC system with two buttons that uses Bayesian inference to determine what the user wishes to communicate. Our information-theoretic analysis of ColorCode simulations sh… ▽ More Many people with severely limited muscle control can only communicate through augmentative and alternative communication (AAC) systems with a small number of buttons. In this paper, we present the design for ColorCode, which is an AAC system with two buttons that uses Bayesian inference to determine what the user wishes to communicate. Our information-theoretic analysis of ColorCode simulations shows that it is efficient in extracting information from the user, even in the presence of errors, achieving nearly optimal error correction. ColorCode is provided as open source software (https://github.com/mrdaly/ColorCode). △ Less

Submitted 4 May, 2022; v1 submitted 20 April, 2022; originally announced April 2022.

Comments: 7 pages, 3 figures, SLPAT Workshop - ACL 2022

User Driven Model Adjustment via Boolean Rule Explanations

Authors: Elizabeth M. Daly, Massimiliano Mattetti, Öznur Alkan, Rahul Nair

Abstract: AI solutions are heavily dependant on the quality and accuracy of the input training data, however the training data may not always fully reflect the most up-to-date policy landscape or may be missing business logic. The advances in explainability have opened the possibility of allowing users to interact with interpretable explanations of ML predictions in order to inject modifications or constrai… ▽ More AI solutions are heavily dependant on the quality and accuracy of the input training data, however the training data may not always fully reflect the most up-to-date policy landscape or may be missing business logic. The advances in explainability have opened the possibility of allowing users to interact with interpretable explanations of ML predictions in order to inject modifications or constraints that more accurately reflect current realities of the system. In this paper, we present a solution which leverages the predictive power of ML models while allowing the user to specify modifications to decision boundaries. Our interactive overlay approach achieves this goal without requiring model retraining, making it appropriate for systems that need to apply instant changes to their decision making. We demonstrate that user feedback rules can be layered with the ML predictions to provide immediate changes which in turn supports learning with less data. △ Less

Submitted 28 March, 2022; originally announced March 2022.

An analytical method to quantify the statistics of energy landscapes in random solid solutions

Authors: Ritesh Jagatramka, Chu Wang, Matthew Daly

Abstract: Recent studies of concentrated solid solutions have highlighted the role of varied solute interactions in the determination of a wide variety of mesoscale properties. These solute interactions emerge as spatial fluctuations in potential energy, which arise from local variations in the chemical environment. Although observations of potential energy fluctuations are well documented in the literature… ▽ More Recent studies of concentrated solid solutions have highlighted the role of varied solute interactions in the determination of a wide variety of mesoscale properties. These solute interactions emerge as spatial fluctuations in potential energy, which arise from local variations in the chemical environment. Although observations of potential energy fluctuations are well documented in the literature, there remains a paucity of methods to determine their statistics. Here, we present a set of analytical equations to quantify the statistics of potential energy landscapes in randomly arranged solid solutions. Our approach is based on a reparameterization of the relations of the embedded atom method in terms of the solute coordination environment. The final equations are general and can be applied to different crystal lattices and energy landscapes, provided the systems of interest can be described by sets of coordination relations. We leverage these statistical relations to study the cohesive energy and generalized planar fault energy landscapes of several different solid solutions. Analytical predictions are validated using molecular statics simulations, which find excellent agreement in most cases. The outcomes of this analysis provide new insights into phase stability and the interpretation of local planar fault energies in solid solutions, which are topics of ongoing discussion within the community. △ Less

Submitted 9 March, 2022; v1 submitted 25 February, 2022; originally announced February 2022.

Improved training in paraffin-wax impregnated Nb3Sn Rutherford cables demonstrated in BOX samples

Authors: Michael Daly, Bernard Auchmann, André Brem, Christoph Hug, Serguei Sidorov, Simon Otten, Marc Dhallé, Zichuan Guo, Anna Kario, Herman ten Kate

Abstract: Resin-impregnated high-field Nb3Sn type of accelerator magnets are known to require extensive training campaigns and even may exhibit performance-limiting defects after thermal or electromagnetic cycling. In order to efficiently explore technological solutions for this behaviour and assess a wide variety of impregnation material combinations and surface treatments, the BOnding eXperiment (BOX) sam… ▽ More Resin-impregnated high-field Nb3Sn type of accelerator magnets are known to require extensive training campaigns and even may exhibit performance-limiting defects after thermal or electromagnetic cycling. In order to efficiently explore technological solutions for this behaviour and assess a wide variety of impregnation material combinations and surface treatments, the BOnding eXperiment (BOX) sample was developed. BOX provides a short-sample test platform featuring magnet-relevant Lorentz forces and exhibits associated training. Here we report on the comparative behaviour of BOX samples comprising the same Nb3Sn Rutherford cable but impregnated either with common resins used in high-field magnets, or with less conventional paraffin wax. Remarkably, the two paraffin wax-impregnated BOX samples reached their critical current without training and are also resilient to thermal and mechanical cycling. These rather encouraging results strongly contrast to those obtained with resin impregnated samples, which show the characteristic extensive training and at best barely reach their critical current value. △ Less

Submitted 26 January, 2022; originally announced January 2022.

Comments: 7 pages, 6 figures, To be published in IOP's Superconductor Science and Technology Journal (SuST)

FROTE: Feedback Rule-Driven Oversampling for Editing Models

Authors: Öznur Alkan, Dennis Wei, Massimiliano Mattetti, Rahul Nair, Elizabeth M. Daly, Diptikalyan Saha

Abstract: Machine learning models may involve decision boundaries that change over time due to updates to rules and regulations, such as in loan approvals or claims management. However, in such scenarios, it may take time for sufficient training data to accumulate in order to retrain the model to reflect the new decision boundaries. While work has been done to reinforce existing decision boundaries, very li… ▽ More Machine learning models may involve decision boundaries that change over time due to updates to rules and regulations, such as in loan approvals or claims management. However, in such scenarios, it may take time for sufficient training data to accumulate in order to retrain the model to reflect the new decision boundaries. While work has been done to reinforce existing decision boundaries, very little has been done to cover these scenarios where decision boundaries of the ML models should change in order to reflect new rules. In this paper, we focus on user-provided feedback rules as a way to expedite the ML models update process, and we formally introduce the problem of pre-processing training data to edit an ML model in response to feedback rules such that once the model is retrained on the pre-processed data, its decision boundaries align more closely with the rules. To solve this problem, we propose a novel data augmentation method, the Feedback Rule-Based Oversampling Technique. Extensive experiments using different ML models and real world datasets demonstrate the effectiveness of the method, in particular the benefit of augmentation and the ability to handle many feedback rules. △ Less

Submitted 6 January, 2022; v1 submitted 4 January, 2022; originally announced January 2022.

Comments: 23 pages

First Results from the REAL-time Transient Acquisition backend (REALTA) at the Irish LOFAR station

Authors: P. C. Murphy, P. Callanan, J. McCauley, D. J. McKenna, D. Ó Fionnagáin, C. K. Louis, M. P. Redman, L. A. Cañizares, E. P. Carley, S. A. Maloney, B. Coghlan, M. Daly, J. Scully, J. Dooley, V. Gajjar, C. Giese, A. Brennan, E. F. Keane, C. A. Maguire, J. Quinn, S. Mooney, A. M. Ryan, J. Walsh, C. M. Jackman, A. Golden , et al. (5 additional authors not shown)

Abstract: Modern radio interferometers such as the LOw Frequency ARray (LOFAR) are capable of producing data at hundreds of gigabits to terabits per second. This high data rate makes the analysis of radio data cumbersome and computationally expensive. While high performance computing facilities exist for large national and international facilities, that may not be the case for instruments operated by a sing… ▽ More Modern radio interferometers such as the LOw Frequency ARray (LOFAR) are capable of producing data at hundreds of gigabits to terabits per second. This high data rate makes the analysis of radio data cumbersome and computationally expensive. While high performance computing facilities exist for large national and international facilities, that may not be the case for instruments operated by a single institution or a small consortium. Data rates for next generation radio telescopes are set to eclipse those currently in operation, hence local processing of data will become all the more important. Here, we introduce the REAL-time Transient Acquisition backend (REALTA), a computing backend at the Irish LOFAR station (I-LOFAR) which facilitates the recording of data in near real-time and post-processing. We also present first searches and scientific results of a number of radio phenomena observed by I-LOFAR and REALTA, including pulsars, fast radio bursts (FRBs), rotating radio transients (RRATs), the search for extraterrestrial intelligence (SETI), Jupiter, and the Sun. △ Less

Submitted 25 August, 2021; originally announced August 2021.

Comments: 12 pages, 10 figures, accepted for publication in Astronomical instrumentation section of Astronomy & Astrophysics 24/08/2021

Journal ref: A&A 655, A16 (2021)

Internal rubble properties of asteroid (101955) Bennu

Authors: P. Tricarico, D. J. Scheeres, A. S. French, J. W. McMahon, D. N. Brack, J. M. Leonard, P. Antreasian, S. R. Chesley, D. Farnocchia, Y. Takahashi, E. M. Mazarico, D. Rowlands, D. Highsmith, K. Getzandanner, M. Moreau, C. L. Johnson, L. Philpott, E. B. Bierhaus, K. J. Walsh, O. S. Barnouin, E. E. Palmer, J. R. Weirich, R. W. Gaskell, M. G. Daly, J. A. Seabrook , et al. (2 additional authors not shown)

Abstract: Exploration of asteroid (101955) Bennu by the OSIRIS-REx mission has provided an in-depth look at this rubble-pile near-Earth asteroid. In particular, the measured gravity field and the detailed shape model of Bennu indicate significant heterogeneities in its interior structure, compatible with a lower density at its center. Here we combine gravity inversion methods with a statistical rubble-pile… ▽ More Exploration of asteroid (101955) Bennu by the OSIRIS-REx mission has provided an in-depth look at this rubble-pile near-Earth asteroid. In particular, the measured gravity field and the detailed shape model of Bennu indicate significant heterogeneities in its interior structure, compatible with a lower density at its center. Here we combine gravity inversion methods with a statistical rubble-pile model to determine the density and size-frequency distribution (SFD) index of the rubble that constitutes Bennu. The best-fitting models indicate that the SFD of the interior is consistent with that observed on the surface, with a cumulative SFD index of approximately $-2.9$. The rubble bulk density is approximately $1.35$ g/cm$^3$, corresponding to a $12$% macro-porosity. We find the largest rubble particle to be approximately $145$ m, whereas the largest void is approximately $10$ m. △ Less

Submitted 23 August, 2021; originally announced August 2021.

Comments: 14 pages, 5 figures, accepted to Icarus

Type III solar radio burst detection and classification: A deep learning approach

Authors: Jeremiah Scully, Ronan Flynn, Eoin Carley, Peter Gallagher, Mark Daly

Abstract: Solar Radio Bursts (SRBs) are generally observed in dynamic spectra and have five major spectral classes, labelled Type I to Type V depending on their shape and extent in frequency and time. Due to their complex characterisation, a challenge in solar radio physics is the automatic detection and classification of such radio bursts. Classification of SRBs has become fundamental in recent years due t… ▽ More Solar Radio Bursts (SRBs) are generally observed in dynamic spectra and have five major spectral classes, labelled Type I to Type V depending on their shape and extent in frequency and time. Due to their complex characterisation, a challenge in solar radio physics is the automatic detection and classification of such radio bursts. Classification of SRBs has become fundamental in recent years due to large data rates generated by advanced radio telescopes such as the LOw-Frequency ARray, (LOFAR). Current state-of-the-art algorithms implement the Hough or Radon transform as a means of detecting predefined parametric shapes in images. These algorithms achieve up to 84% accuracy, depending on the Type of radio burst being classified. Other techniques include procedures that rely on Constant-FalseAlarm-Rate detection, which is essentially detection of radio bursts using a de-noising and adaptive threshold in dynamic spectra. It works well for a variety of different Types of radio bursts and achieves an accuracy of up to 70%. In this research, we are introducing a methodology named You Only Look Once v2 (YOLOv2) for solar radio burst classification. By using Type III simulation methods we can train the algorithm to classify real Type III solar radio bursts in real-time at an accu △ Less

Submitted 27 May, 2021; originally announced May 2021.

Comments: 6 pages, 6 figures, Irish Signals & Systems Conference 2021 (pre-print)

Yield strength insensitivity in a dual-phase high entropy alloy after prolonged high temperature annealing

Authors: Junaid Ahmed, Matthew Daly

Abstract: Recent studies of FeMnCoCr-based high entropy alloys have demonstrated uncommon deformation behaviors such as transformation-induced plasticity, which were largely believed to be restricted to select families of steels. Coupled with the potential for entropy stabilization of high symmetry phases at high temperatures, this system represents a promising class of materials for structural applications… ▽ More Recent studies of FeMnCoCr-based high entropy alloys have demonstrated uncommon deformation behaviors such as transformation-induced plasticity, which were largely believed to be restricted to select families of steels. Coupled with the potential for entropy stabilization of high symmetry phases at high temperatures, this system represents a promising class of materials for structural applications in extreme environments. Yet, transformation-induced plasticity mechanisms are notably sensitive to microstructure parameters and the literature offers examples of deleterious decomposition of high entropy alloys under heat treatment, which raises concerns of resiliency in mechanical performance. Here, we evaluate the evolution of microstructure and mechanical properties of a FeMnCoCr high entropy alloy after prolonged heat treatment at high temperature. Microstructures are found to retain their characteristic austenite/martensite features, with parent face-centered cubic grains partitioned by hexagonal close-packed laths after heat treatment at 1200 C for up to 48 hours. Results of mechanical testing reveal an unusual insensitivity of this alloy to grain growth-induced weakening effects. Namely, the yield strengths of FeMnCoCr samples are observed to remain constant across all heat treatment conditions, despite a near four-fold increase in the grain size. Close examination of post-heat treatment microstructures reveals a dramatic decrease in the inter-lath spacing at longer durations, which segments parent austenite grains. This crystal partitioning counteracts conventional grain growth-induced weakening by introducing additional barriers for dislocation pile-up. These results offer new insights into the mechanical resiliency of this transformation-induced plasticity high entropy alloy under prolonged high temperature heat treatment. △ Less

Submitted 12 June, 2021; v1 submitted 9 March, 2021; originally announced March 2021.

The Competition Between Deformation Twinning and Dislocation Slip in Deformed Face-Centered Cubic Metals

Authors: Ritesh Jagatramka, Matthew Daly

Abstract: The competition between deformation twinning and dislocation slip underpins the evolution of mesoscale plasticity in face-centered cubic materials. While competition between these mechanisms is known to be related to the critical features of the generalized planar fault energy landscape, a physical theory that tracks competition over extended plasticity has yet to emerge. Here, we report a methodo… ▽ More The competition between deformation twinning and dislocation slip underpins the evolution of mesoscale plasticity in face-centered cubic materials. While competition between these mechanisms is known to be related to the critical features of the generalized planar fault energy landscape, a physical theory that tracks competition over extended plasticity has yet to emerge. Here, we report a methodology to predict the mesoscale evolution of this competition in deformed crystals. Our approach implements kinetic Monte Carlo simulations to examine fault structure evolution in face-centered cubic metals using intrinsic material parameters as inputs. These results are leveraged to derive an analytical model for the evolution of the fault fraction, fault densities, and partitioning of plastic strains among deformation mechanisms. In addition, we define a competition parameter that measures the tendencies for deformation twinning and dislocation slip. In contrast to previous twinnability parameters, our derivation considers deformation history when examining mechanism competition. This contribution therefore extends the reach of deformation twinning theory beyond incipient nucleation events. These products find direct applications in work hardening and crystal plasticity models, which have previously relied on phenomenological relations to predict the mesoscale evolution of deformation twin microstructures. △ Less

Submitted 2 May, 2022; v1 submitted 26 January, 2021; originally announced January 2021.

Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu

Authors: Pedro H. Hasselmann, Sonia Fornasier, Maria A. Barucci, Alice Praet, Beth E. Clark, Jian-Yang Li, Dathon R. Golish, Daniella N. DellaGiustina, Jasinghege Don P. Deshapriya, Xian-Duan Zou, Mike G. Daly, Olivier S. Barnouin, Amy A. Simon, Dante S. Lauretta

Abstract: The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpr… ▽ More The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Comments: 15 pages, 11 figures

Journal ref: Icarus 2020

A Competing Risks Model with Binary Time Varying Covariates for Estimation of Breast Cancer Risks in BRCA1 Families

Authors: Yun-Hee Choi, Hae Jung, Saundra Buys, Mary Daly, Esther John, John Hopper, Irene Andrulis, Mary-Beth Terry, Laurent Briollais

Abstract: Mammographic screening and prophylactic surgery such as risk-reducing sal**o oophorectomy (RRSO) can potentially reduce breast cancer risks among mutation carriers of BRCA families. The evaluation of these interventions is usually complicated by the fact that their effects on breast cancer may change over time and by the presence of competing risks. We introduce a correlated competing risks mode… ▽ More Mammographic screening and prophylactic surgery such as risk-reducing sal**o oophorectomy (RRSO) can potentially reduce breast cancer risks among mutation carriers of BRCA families. The evaluation of these interventions is usually complicated by the fact that their effects on breast cancer may change over time and by the presence of competing risks. We introduce a correlated competing risks model to model breast and ovarian cancer risks within BRCA1 families that accounts for time-varying covariates (TVCs). Different parametric forms for these TVCs are proposed for more flexibility and a correlated gamma frailty model is specified to account for the correlated competing events. We also introduced a new ascertainment correction approach that accounts for the selection of families through probands affected with either breast or ovarian cancer, or unaffected. Our simulation studies demonstrate the good performances of our proposed approach in terms of bias and precision of the estimators of model parameters and cause-specific penetrances over different levels of familial correlations. We apply our new approach to 498 BRCA1 mutation carrier families recruited through the Breast Cancer Family Registry. Our results demonstrate the importance of the functional form of the TVC when assessing the role of RRSO on breast cancer. In particular, under the best fitting TVC model, the overall effect of RRSO on breast cancer risk was statistically significant in women with BRCA1. △ Less

Submitted 5 November, 2020; v1 submitted 12 February, 2020; originally announced February 2020.

IRF: Interactive Recommendation through Dialogue

Authors: Oznur Alkan, Massimiliano Mattetti, Elizabeth M. Daly, Adi Botea, Inge Vejsbjerg

Abstract: Recent research focuses beyond recommendation accuracy, towards human factors that influence the acceptance of recommendations, such as user satisfaction, trust, transparency and sense of control.We present a generic interactive recommender framework that can add interaction functionalities to non-interactive recommender systems.We take advantage of dialogue systems to interact with the user and w… ▽ More Recent research focuses beyond recommendation accuracy, towards human factors that influence the acceptance of recommendations, such as user satisfaction, trust, transparency and sense of control.We present a generic interactive recommender framework that can add interaction functionalities to non-interactive recommender systems.We take advantage of dialogue systems to interact with the user and we design a middleware layer to provide the interaction functions, such as providing explanations for the recommendations, managing users preferences learnt from dialogue, preference elicitation and refining recommendations based on learnt preferences. △ Less

Submitted 3 October, 2019; originally announced October 2019.

Comments: 2 pages, 1 figure, ACM RecSys Conference 2019

The Global Surface Roughness of 25143 Itokawa

Authors: Hannah C. M. Susorney, Catherine L. Johnson, Olivier S. Barnouin, Michael G. Daly, Jeffrey A. Seabrook, Edward B. Bierhaus, Dante S. Lauretta

Abstract: Surface roughness is an important metric in understanding how the geologic history of an asteroid affects its small-scale topography and it provides an additional means to quantitatively compare one asteroid with another. In this study, we report the first detailed global surface roughness maps of 25143 Itokawa at horizontal scales from 8--32~m. Comparison of the spatial distribution of the surfac… ▽ More Surface roughness is an important metric in understanding how the geologic history of an asteroid affects its small-scale topography and it provides an additional means to quantitatively compare one asteroid with another. In this study, we report the first detailed global surface roughness maps of 25143 Itokawa at horizontal scales from 8--32~m. Comparison of the spatial distribution of the surface roughness of Itokawa with 433 Eros, the other asteroid for which this kind of analysis has been possible, indicates that the two asteroids are dominated by different geologic processes. On Itokawa, the surface roughness reflects the results of down-slope activity that moves fine grained material into geopotential lows and leaves large blocks in geopotential highs. On 433 Eros, the surface roughness is controlled by geologically-recent large impact craters. In addition, large longitudinal spatial variations of surface roughness could impact the role of YORP on Itokawa. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Journal ref: Icarus (2019) 235, 141-152

An Evaluation Framework for Interactive Recommender System

Authors: Oznur Alkan, Elizabeth M. Daly, Adi Botea

Abstract: Traditional recommender systems present a relatively static list of recommendations to a user where the feedback is typically limited to an accept/reject or a rating model. However, these simple modes of feedback may only provide limited insights as to why a user likes or dislikes an item and what aspects of the item the user has considered. Interactive recommender systems present an opportunity t… ▽ More Traditional recommender systems present a relatively static list of recommendations to a user where the feedback is typically limited to an accept/reject or a rating model. However, these simple modes of feedback may only provide limited insights as to why a user likes or dislikes an item and what aspects of the item the user has considered. Interactive recommender systems present an opportunity to engage the user in the process by allowing them to interact with the recommendations, provide feedback and impact the results in real-time. Evaluation of the impact of the user interaction typically requires an extensive user study which is time consuming and gives researchers limited opportunities to tune their solutions without having to conduct multiple rounds of user feedback. Additionally, user experience and design aspects can have a significant impact on the user feedback which may result in not necessarily assessing the quality of some of the underlying algorithmic decisions in the overall solution. As a result, we present an evaluation framework which aims to simulate the users interacting with the recommender. We formulate metrics to evaluate the quality of the interactive recommenders which are outputted by the framework once simulation is completed. While simulation along is not sufficient to evaluate a complete solution, the results can be useful to help researchers tune their solution before moving to the user study stage. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Comments: 7 pages

Catalog of New K2 Exoplanet Candidates from Citizen Scientists

Authors: Jon K. Zink, Kevin K. Hardegree-Ullman, Jessie L. Christiansen, Ian J. M. Crossfield, Erik A. Petigura, Chris J. Lintott, John H. Livingston, David R. Ciardi, Geert Barentsen, Courtney D. Dressing, Alexander Ye, Joshua E. Schlieder, Kevin Acres, Peter Ansorge, Dario Arienti, Elisabeth Baeten, Victoriano Canales Cerd, Itayi Chitsiga, Maxwell Daly, James Damboiu, Martin Ende, Adnan Erdag, Stiliyan Evstatiev, Joseph Henderson, David Hine , et al. (12 additional authors not shown)

Abstract: We provide 28 new planet candidates that have been vetted by citizen scientists and expert astronomers. This catalog contains 9 likely rocky candidates ($R_{pl} < 2.0R_\oplus$) and 19 gaseous candidates ($R_{pl} > 2.0R_\oplus$). Within this list we find one multi-planet system (EPIC 246042088). These two sub-Neptune ($2.99 \pm 0.02R_\oplus$ and $3.44 \pm 0.02R_\oplus$) planets exist in a near 3:2… ▽ More We provide 28 new planet candidates that have been vetted by citizen scientists and expert astronomers. This catalog contains 9 likely rocky candidates ($R_{pl} < 2.0R_\oplus$) and 19 gaseous candidates ($R_{pl} > 2.0R_\oplus$). Within this list we find one multi-planet system (EPIC 246042088). These two sub-Neptune ($2.99 \pm 0.02R_\oplus$ and $3.44 \pm 0.02R_\oplus$) planets exist in a near 3:2 orbital resonance. The discovery of this multi-planet system is important in its addition to the list of known multi-planet systems within the K2 catalog, and more broadly in understanding the multiplicity distribution of the exoplanet population (Zink et al. 2019). The candidates on this list are anticipated to generate RV amplitudes of 0.2-18 m/s, many within the range accessible to current facilities. △ Less

Submitted 5 March, 2019; v1 submitted 1 March, 2019; originally announced March 2019.

Journal ref: RNAAS 2019, Volume 3, Number 2

Thermally Driven Topology in Frustrated Systems

Authors: Jie-Xiang Yu, Morgan Daly, Jiadong Zang

Abstract: Non-trivial topology in a two-dimensional frustrated spin system with the Dzyaloshinskii-Moriya (DM) interaction was investigated by Monto Carlo simulations. At finite temperatures, thermally driven topology was discovered and was found to be dominant at low magnetic field. This topological charge has a quadratic relation with the DM interaction and linear realtions with the external magnetic fiel… ▽ More Non-trivial topology in a two-dimensional frustrated spin system with the Dzyaloshinskii-Moriya (DM) interaction was investigated by Monto Carlo simulations. At finite temperatures, thermally driven topology was discovered and was found to be dominant at low magnetic field. This topological charge has a quadratic relation with the DM interaction and linear realtions with the external magnetic field or the uniaxial magnetic anisotropy. We also proposed a real frustrated system, the Mn-Bi mono-layer film with exceedingly large DM interaction, to enable thermally driven topology. Other topological non-trivial phases in high magnetic field region were also discussed in this real system. △ Less

Submitted 14 September, 2018; originally announced September 2018.

Journal ref: Phys. Rev. B 99, 104431 (2019)

Trajectory Tracking Control of a Flexible Spine Robot, With and Without a Reference Input

Authors: Andrew P. Sabelhaus, Shirley Hua**g Zhao, Mallory C. Daly, Ellande Tang, Edward Zhu, Abishek K. Akella, Zeerek A. Ahmad, Vytas SunSpiral, Alice M. Agogino

Abstract: The Underactuated Lightweight Tensegrity Robotic Assistive Spine (ULTRA Spine) project is an ongoing effort to develop a flexible, actuated backbone for quadruped robots. In this work, model-predictive control is used to track a trajectory in the robot's state space, in simulation. The state trajectory used here corresponds to a bending motion of the spine, with translations and rotations of the m… ▽ More The Underactuated Lightweight Tensegrity Robotic Assistive Spine (ULTRA Spine) project is an ongoing effort to develop a flexible, actuated backbone for quadruped robots. In this work, model-predictive control is used to track a trajectory in the robot's state space, in simulation. The state trajectory used here corresponds to a bending motion of the spine, with translations and rotations of the moving vertebrae. Two different controllers are presented in this work: one that does not use a reference input but includes smoothing constrants, and a second one that uses a reference input without smoothing. For the smoothing controller, without reference inputs, the error converges to zero, while the simpler-to-tune controller with an input reference shows small errors but not complete convergence. It is expected that this controller will converge as it is improved further. △ Less

Submitted 24 August, 2018; originally announced August 2018.

Journal ref: 2017 NASA/ESA Conference on Adaptive Hardware and Systems - Workshop on Structurally Adaptive Tensegrity Robots

Denoising Imaging Polarimetry by an Adapted BM3D Method

Authors: Alexander B. Tibbs, Ilse M. Daly, Nicholas W. Roberts, David R. Bull

Abstract: Imaging polarimetry allows more information to be extracted from a scene than conventional intensity or colour imaging. However, a major challenge of imaging polarimetry is image degradation due to noise. This paper investigates the mitigation of noise through denoising algorithms and compares existing denoising algorithms with a new method, based on BM3D. This algorithm, PBM3D, gives visual quali… ▽ More Imaging polarimetry allows more information to be extracted from a scene than conventional intensity or colour imaging. However, a major challenge of imaging polarimetry is image degradation due to noise. This paper investigates the mitigation of noise through denoising algorithms and compares existing denoising algorithms with a new method, based on BM3D. This algorithm, PBM3D, gives visual quality superior to the state of the art across all images and noise standard deviations tested. We show that denoising polarization images using PBM3D allows the degree of polarization to be more accurately calculated by comparing it to spectroscopy methods. △ Less

Submitted 16 November, 2017; v1 submitted 13 November, 2017; originally announced November 2017.

Thermally Driven Topology in Chiral Magnets

Authors: Wen-Tao Hou, Jie-Xiang Yu, Morgan Daly, Jiadong Zang

Abstract: Chiral magnets give rise to the anti-symmetric Dzyaloshinskii-Moriya (DM) interaction, which induces topological nontrivial textures such as magnetic skyrmions. The topology is characterized by integer values of the topological charge. In this work, we performed the Monte-Carlo calculation of a two-dimensional model of the chiral magnet. A surprising upturn of the topological charge is identified… ▽ More Chiral magnets give rise to the anti-symmetric Dzyaloshinskii-Moriya (DM) interaction, which induces topological nontrivial textures such as magnetic skyrmions. The topology is characterized by integer values of the topological charge. In this work, we performed the Monte-Carlo calculation of a two-dimensional model of the chiral magnet. A surprising upturn of the topological charge is identified at high fields and high temperatures. This upturn is closely related to thermal fluctuations at the atomic scale, and is explained by a simple physical picture based on triangulation of the lattice. This emergent topology is also explained by a field-theoretic analysis using $CP^{1}$ formalism. △ Less

Submitted 26 February, 2018; v1 submitted 20 May, 2017; originally announced May 2017.

Comments: 12 pages, 4 figures. Revised version with additional references

Journal ref: Phys. Rev. B 96, 140403(R) (2017)

OSIRIS-REx Contamination Control Strategy and Implementation

Authors: J. P. Dworkin, L. A. Adelman, T. Ajluni, A. V. Andronikov, J. C. Aponte, A. E. Bartels, E. Beshore, E. B. Bierhaus, J. R. Brucato, B. H. Bryan, A. S. Burton, M. P. Callahan, S. L. Castro-Wallace, B. C. Clark, S. J. Clemett, H. C. Connolly Jr., W. E. Cutlip, S. M. Daly, V. E. Elliott, J. E. Elsila, H. L. Enos, D. F. Everett, I. A. Franchi, D. P. Glavin, H. V. Graham , et al. (37 additional authors not shown)

Abstract: OSIRIS-REx will return pristine samples of carbonaceous asteroid Bennu. This article describes how pristine was defined based on expectations of Bennu and on a realistic understanding of what is achievable with a constrained schedule and budget, and how that definition flowed to requirements and implementation. To return a pristine sample, the OSIRIS- REx spacecraft sampling hardware was maintaine… ▽ More OSIRIS-REx will return pristine samples of carbonaceous asteroid Bennu. This article describes how pristine was defined based on expectations of Bennu and on a realistic understanding of what is achievable with a constrained schedule and budget, and how that definition flowed to requirements and implementation. To return a pristine sample, the OSIRIS- REx spacecraft sampling hardware was maintained at level 100 A/2 and <180 ng/cm2 of amino acids and hydrazine on the sampler head through precision cleaning, control of materials, and vigilance. Contamination is further characterized via witness material exposed to the spacecraft assembly and testing environment as well as in space. This characterization provided knowledge of the expected background and will be used in conjunction with archived spacecraft components for comparison with the samples when they are delivered to Earth for analysis. Most of all, the cleanliness of the OSIRIS-REx spacecraft was achieved through communication among scientists, engineers, managers, and technicians. △ Less

Submitted 26 October, 2017; v1 submitted 8 April, 2017; originally announced April 2017.

Comments: 75 pages, 28 figures, 2 supplements, accepted for publication in Space Science Reviews

OSIRIS-REx: Sample Return from Asteroid (101955) Bennu

Authors: D. S. Lauretta, S. S. Balram-Knutson, E. Beshore, W. V. Boynton, C. Drouet dAubigny, D. N. DellaGiustina, H. L. Enos, D. R. Gholish, C. W. Hergenrother, E. S. Howell, C. A. Johnson, E. T. Morton, M. C. Nolan, B. Rizk, H. L. Roper, A. E. Bartels, B. J. Bos, J. P. Dworkin, D. E. Highsmith, D. A. Lorenz, L. F. Lim, R. Mink, M. C. Moreau, J. A. Nuth, D. C. Reuter , et al. (23 additional authors not shown)

Abstract: In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019… ▽ More In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in August 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennus resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Comments: 89 pages, 39 figures, submitted to Space Science Reviews - OSIRIS-REx special issue

Evanescent field trap** of nanoparticles using nanostructured ultrathin optical fibers

Authors: Mark Daly, Viet Giang Truong, Síle Nic Chormaic

Abstract: While conventional optical trap** techniques can trap objects with submicron dimensions, the underlying limits imposed by the diffraction of light generally restrict their use to larger or higher refractive index particles. As the index and diameter decrease, the trap** difficulty rapidly increases; hence, the power requirements for stable trap** become so large as to quickly denature the tr… ▽ More While conventional optical trap** techniques can trap objects with submicron dimensions, the underlying limits imposed by the diffraction of light generally restrict their use to larger or higher refractive index particles. As the index and diameter decrease, the trap** difficulty rapidly increases; hence, the power requirements for stable trap** become so large as to quickly denature the trapped objects in such diffraction-limited systems. Here, we present an evanescent field based device capable of confining low index nanoscale particles using modest optical powers as low as 1.2 mW, with additional applications in the field of cold atom trap**. Our experiment uses a nanostructured optical micro-nanofiber to trap 200 nm, low index contrast, fluorescent particles within the structured region, thereby overcoming diffraction limitations. We analyze the trap** potential of this device both experimentally and theoretically, and show how strong optical traps are achieved with low input powers. △ Less

Submitted 16 June, 2016; v1 submitted 1 March, 2016; originally announced March 2016.

Comments: 13 pages, 6 figures

Free Energy Rate Density and Self-organization in Complex Systems

Authors: Georgi Yordanov Georgiev, Erin Gombos, Timothy Bates, Kaitlin Henry, Alexander Casey, Michael Daly

Abstract: One of the most important tasks in science is to understand the self-organization's arrow of time. To attempt this we utilize the connection between self-organization and non-equilibrium thermodynamics. Eric Chaisson calculated an exponential increase of Free Energy Rate Density (FERD) in Cosmic Evolution, from the Big Bang until now, paralleling the increase of system's structure. We term these s… ▽ More One of the most important tasks in science is to understand the self-organization's arrow of time. To attempt this we utilize the connection between self-organization and non-equilibrium thermodynamics. Eric Chaisson calculated an exponential increase of Free Energy Rate Density (FERD) in Cosmic Evolution, from the Big Bang until now, paralleling the increase of system's structure. We term these studies "Devology". We connect FERD to the principle of least action for complex systems, driving their increase of action efficiency. We study CPUs as a specific system in which the organization, the total amount of action and FERD are connected in a positive feedback loop, providing exponential growth of all three and power law relations between them. This is a deep connection, reaching to the first principles of physics: the least action principle and the second law of thermodynamics. We propose size-density and complexity-density rules in addition to the established size-complexity one. △ Less

Submitted 31 October, 2015; originally announced November 2015.

Comments: 7 pages, 2 figures

Modelling afferent nerve responses to bladder filling

Authors: Maryam Argungu, Saziye Bayram, Bindi Brook, Buddhapriya Chakrabarti, Richard H Clayton, Donna M Daly, Rosemary J Dyson, Craig Holloway, Varun Manhas, Shailesh Naire, Tom Shearer, Radostin D. Simitev

Abstract: A sensation of fullness in the bladder is a regular experience, yet the mechanisms that act to generate this sensation remain poorly understood. This is an important issue because of the clinical problems that can result when this system does not function properly. The aim of the study group activity was to develop mathematical models that describe the mechanics of bladder filling, and how stretch… ▽ More A sensation of fullness in the bladder is a regular experience, yet the mechanisms that act to generate this sensation remain poorly understood. This is an important issue because of the clinical problems that can result when this system does not function properly. The aim of the study group activity was to develop mathematical models that describe the mechanics of bladder filling, and how stretch modulates the firing rate of afferent nerves. Several models were developed, which were qualitatively consistent with experimental data obtained from a mouse model. △ Less

Submitted 11 October, 2015; originally announced October 2015.

Comments: This report summarises the outcomes from a problem posed at the UK MMSG NC3R's \& POEMS Study Group meeting, 8--12 Sept 2014, Cambridge

Laboratory Characterization and Astrophysical Detection of Vibrationally Excited States of Vinyl Cyanide in Orion-KL

Authors: A. López, B. Tercero, Z. Kisiel, A. M. Daly, C. Bermúdez, H. Calcutt, N. Marcelino, S. Viti, B. J. Drouin, I. R. Medvedev, C. F. Neese, L. Pszczółkowski, J. L. Alonso, J. Cernicharo

Abstract: New laboratory data of CH$_2$CHCN (vinyl cyanide) in its ground and vibrationally excited states at the microwave to THz domain allow searching for these excited state transitions in the Orion-KL line survey. Frequency-modulated spectrometers combined into a single broadband 50-1900 GHz spectrum provided measurements of CH$_2$CHCN covering a spectral range of 18-1893 GHz, whose assignments was con… ▽ More New laboratory data of CH$_2$CHCN (vinyl cyanide) in its ground and vibrationally excited states at the microwave to THz domain allow searching for these excited state transitions in the Orion-KL line survey. Frequency-modulated spectrometers combined into a single broadband 50-1900 GHz spectrum provided measurements of CH$_2$CHCN covering a spectral range of 18-1893 GHz, whose assignments was confirmed by Stark modulation spectra in the 18-40 GHz region and by ab-initio anharmonic force field calculations. For analyzing the emission lines of CH$_2$CHCN species detected in Orion-KL we used the excitation and radiative transfer code (MADEX) at LTE conditions. The rotational transitions of the ground state of this molecule emerge from four cloud components of hot core nature which trace the physical and chemical conditions of high mass star forming regions in the Orion-KL Nebula. The total column density of CH$_2$CHCN in the ground state is (3.0$\pm$0.9)x10$^{15}$ cm$^{-2}$. We report on the first interstellar detection of transitions in the v10=1/(v11=1,v15=1) dyad in space, and in the v11=2 and v11=3 states in Orion-KL. The lowest energy vibrationally excited states of vinyl cyanide such as v11=1 (at 328.5 K), v15=1 (at 478.6 K), v11=2 (at 657.8 K), the v10=1/(v11=1,v15=1) dyad (at 806.4/809.9 K), and v11=3 (at 987.9 K) are populated under warm and dense conditions, so they probe the hottest parts of the Orion-KL source. Column density and rotational and vibrational temperatures for CH$_2$CHCN in their ground and excited states, as well as for the isotopologues, have been constrained by means of a sample of more than 1000 lines in this survey. Moreover, we present the detection of methyl isocyanide (CH$_3$NC) for the first time in Orion-KL and a tentative detection of vinyl isocyanide (CH$_2$CHNC) and give column density ratios between the cyanide and isocyanide isomers. △ Less

Submitted 16 July, 2014; originally announced July 2014.

Comments: 46 pages, 22 figures, 14 tables, 9 online tables

Journal ref: A&A 572, A44 (2014)

A kinematic study of energy barriers to crack formation in graphene tilt boundaries

Authors: Matthew Daly, Chandra Veer Singh

Abstract: Recent experimental studies have observed a surprisingly wide range of strengths in polycrystalline graphene. Previous computational investigations of graphene tilt boundaries have highlighted the role of interfacial topology in determining mechanical properties. However, a rigorous characterization of deformation energy barriers is lacking, which precludes direct comparison to the available exper… ▽ More Recent experimental studies have observed a surprisingly wide range of strengths in polycrystalline graphene. Previous computational investigations of graphene tilt boundaries have highlighted the role of interfacial topology in determining mechanical properties. However, a rigorous characterization of deformation energy barriers is lacking, which precludes direct comparison to the available experimental data. In the current study, molecular dynamics tensile studies are performed to quantify kinematic effects on failure initiation in a wide range of graphene tilt boundaries. Specifically, the process of crack formation is investigated to provide a conservative estimate of strength at experimental loading rates. Contrary to previous studies, significant strain rate sensitivity is observed, resulting in reductions of crack formation stresses on the order of 7 to 33%. Activation energies of crack formation are calculated in the range of 0.58 to 2.07 eV based on an Arrhenius relation that is fit to the collected simulation data. Physically, the magnitude of activation energies in graphene tilt boundaries are found to be linearly correlated to the pre-stress found at the critical bonds in graphene tilt boundaries. Predictions reported in the present study provide a possible explanation for the wide range of strengths experimentally observed in polycrystalline graphene and greatly improve upon current theoretical estimates. △ Less

Submitted 11 September, 2014; v1 submitted 8 April, 2014; originally announced April 2014.

Comments: 13 pages and 8 figures with supplement. Missing jpg figures are appended as supplemental info for download at arXiv:1404.2210v1 Update: Added citation for Journal paper

Journal ref: J. Appl. Phys. 115 22 (2014) 223513

Spectroscopic characterization and detection of Ethyl Mercaptan in Orion

Authors: L. Kolesniková, B. Tercero, J. Cernicharo, J. L. Alonso, A. M. Daly, B. P. Gordon, S. T. Shipman

Abstract: New laboratory data of ethyl mercaptan, CH$_{3}$CH$_{2}$SH, in the millimeter and submillimeter-wave domains (up to 880 GHz) provided very precise values of the spectroscopic constants that allowed the detection of $gauche$-CH$_3$CH$_2$SH towards Orion KL. 77 unblended or slightly blended lines plus no missing transitions in the range 80-280 GHz support this identification. A detection of methyl m… ▽ More New laboratory data of ethyl mercaptan, CH$_{3}$CH$_{2}$SH, in the millimeter and submillimeter-wave domains (up to 880 GHz) provided very precise values of the spectroscopic constants that allowed the detection of $gauche$-CH$_3$CH$_2$SH towards Orion KL. 77 unblended or slightly blended lines plus no missing transitions in the range 80-280 GHz support this identification. A detection of methyl mercaptan, CH$_{3}$SH, in the spectral survey of Orion KL is reported as well. Our column density results indicate that methyl mercaptan is $\simeq$ 5 times more abundant than ethyl mercaptan in the hot core of Orion KL. △ Less

Submitted 30 January, 2014; originally announced January 2014.

Comments: Accepted for publication in ApJL (30 January 2014)/ submitted (8 January 2014)

Nanostructured optical nanofibres for atom trap**

Authors: Mark Daly, Viet Giang Truong, Ciarán Phelan, Kieran Deasy, Síle Nic Chormaic

Abstract: We propose an optical dipole trap for cold neutral atoms based on the electric field produced from the evanescent fields in a hollow rectangular slot cut through an optical nanofibre. In particular, we discuss the trap performance in relation to laser-cooled rubidium atoms and show that a far off-resonance, blue-detuned field combined with the attractive surface-atom interaction potential from the… ▽ More We propose an optical dipole trap for cold neutral atoms based on the electric field produced from the evanescent fields in a hollow rectangular slot cut through an optical nanofibre. In particular, we discuss the trap performance in relation to laser-cooled rubidium atoms and show that a far off-resonance, blue-detuned field combined with the attractive surface-atom interaction potential from the dielectric material forms a stable trap** configuration. With the addition of a red-detuned field, we demonstrate how three dimensional confinement of the atoms at a distance of 140 - 200 nm from the fibre surface within the slot can be accomplished. This scheme facilitates optical coupling between the atoms and the nanofibre that could be exploited for quantum communication schemes using ensembles of laser-cooled atoms. △ Less

Submitted 6 May, 2014; v1 submitted 18 November, 2013; originally announced November 2013.

Comments: 18 pages, 13 figures

Mechanism of organization increase in complex systems

Authors: Georgi Yordanov Georgiev, Kaitlin Henry, Timothy Bates, Erin Gombos, Alexander Casey, Michael Daly, Amrit Vinod, Hyunseung Lee

Abstract: This paper proposes a variational approach to describe the evolution of organization of complex systems from first principles, as increased efficiency of physical action. Most simply stated, physical action is the product of the energy and time necessary for motion. When complex systems are modeled as flow networks, this efficiency is defined as a decrease of action for one element to cross betwee… ▽ More This paper proposes a variational approach to describe the evolution of organization of complex systems from first principles, as increased efficiency of physical action. Most simply stated, physical action is the product of the energy and time necessary for motion. When complex systems are modeled as flow networks, this efficiency is defined as a decrease of action for one element to cross between two nodes, or endpoints of motion - a principle of least unit action. We find a connection with another principle that of most total action, or a tendency for increase of the total action of a system. This increase provides more energy and time for minimization of the constraints to motion in order to decrease unit action, and therefore to increase organization. Also, with the decrease of unit action in a system, its capacity for total amount of action increases. We present a model of positive feedback between action efficiency and the total amount of action in a complex system, based on a system of ordinary differential equations, which leads to an exponential growth with time of each and a power law relation between the two. We present an agreement of our model with data for core processing units of computers. This approach can help to describe, measure, manage, design and predict future behavior of complex systems to achieve the highest rates of self-organization and robustness. △ Less

Submitted 15 June, 2014; v1 submitted 10 November, 2013; originally announced November 2013.

Comments: 22 pages, 4 figures, 1 table

Journal ref: Complexity 25 Jul 2014

Increase of Organization in Complex Systems

Authors: Georgi Yordanov Georgiev, Michael Daly, Erin Gombos, Amrit Vinod, Ga**der Hoonjan

Abstract: Measures of complexity and entropy have not converged to a single quantitative description of levels of organization of complex systems. The need for such a measure is increasingly necessary in all disciplines studying complex systems. To address this problem, starting from the most fundamental principle in Physics, here a new measure for quantity of organization and rate of self-organization in c… ▽ More Measures of complexity and entropy have not converged to a single quantitative description of levels of organization of complex systems. The need for such a measure is increasingly necessary in all disciplines studying complex systems. To address this problem, starting from the most fundamental principle in Physics, here a new measure for quantity of organization and rate of self-organization in complex systems based on the principle of least (stationary) action is applied to a model system - the central processing unit (CPU) of computers. The quantity of organization for several generations of CPUs shows a double exponential rate of change of organization with time. The exact functional dependence has a fine, S-shaped structure, revealing some of the mechanisms of self-organization. The principle of least action helps to explain the mechanism of increase of organization through quantity accumulation and constraint and curvature minimization with an attractor, the least average sum of actions of all elements and for all motions. This approach can help describe, quantify, measure, manage, design and predict future behavior of complex systems to achieve the highest rates of self organization to improve their quality. It can be applied to other complex systems from Physics, Chemistry, Biology, Ecology, Economics, Cities, network theory and others where complex systems are present. △ Less

Submitted 26 January, 2013; originally announced January 2013.

Comments: 4 pages, 1 figure. arXiv admin note: substantial text overlap with arXiv:1203.6681

Journal ref: World Academy of Science, Engineering and Technology 71 2012

Age, Sex, and Genetic Architecture of Human Gene Expression in EBV Transformed Cell Lines

Authors: Manuel A. Rivas, Mark J. Daly, Itsik Pe'er

Abstract: Individual expression profiles from EBV transformed cell lines are an emerging resource for genomic investigation. In this study we characterize the effects of age, sex, and genetic variation on gene expression by surveying public datasets of such profiles. We establish that the expression space of cell lines maintains genetic as well as non-germline information, in an individual-specific and cr… ▽ More Individual expression profiles from EBV transformed cell lines are an emerging resource for genomic investigation. In this study we characterize the effects of age, sex, and genetic variation on gene expression by surveying public datasets of such profiles. We establish that the expression space of cell lines maintains genetic as well as non-germline information, in an individual-specific and cross-tissue manner. Age of donor is associated with the expression of 949 genes in the derived cell line. Age-associated genes include over-representation of immune-related genes, specifically MHC Class I genes, a phenomenon that replicates across tissues and organisms. Sex associated genes in these cell lines include likely candidates, such as genes that escape X-inactivation,testis specific expressed genes, androgen and estrogen specific genes, but also gene families previously unknown to be sex associated such as common microRNA targets (MIR-490, V_ARP1_01, MIR-489). Finally, we report 494 transcripts whose expression levels are associated with a genetic variant in cis, overlap** and validating previous reports. Incorporating age in analysis of association facilitates additional discovery of trans-acting regulatory genetic variants. Our findings promote expression profiling of transformed cell lines as a vehicle for understanding cellular systems beyond the specific lines. △ Less

Submitted 1 November, 2009; originally announced November 2009.

Comments: 27 pages, 3 figures