-
Experimental Investigation of a Recurrent Optical Spectrum Slicing Receiver for Intensity Modulation/Direct Detection systems using Programmable Photonics
Authors:
Kostas Sozos,
Francesco Da Ros,
Metodi P. Yankov,
George Sarantoglou,
Stavros Deligiannidis,
Charis Mesaritakis,
Adonis Bogris
Abstract:
In this paper, we experimentally validate our previous numerical works in recurrent optical spectrum slicing (ROSS) accelerators for dispersion compensation in high-speed IM/DD links. For this, we utilize recurrent filters implemented both through a waveshaper and by exploiting novel integrated programmable photonic platforms. Different recurrent configurations are tested. The ROSS accelerators ex…
▽ More
In this paper, we experimentally validate our previous numerical works in recurrent optical spectrum slicing (ROSS) accelerators for dispersion compensation in high-speed IM/DD links. For this, we utilize recurrent filters implemented both through a waveshaper and by exploiting novel integrated programmable photonic platforms. Different recurrent configurations are tested. The ROSS accelerators exploit frequency processing through recurrent optical filter nodes in order to mitigate the power fading effect, which hinders the transmission distance and baudrate scalability of IM/DD systems. By equalizing even 80 km of 64 Gb/s PAM-4 transmission in C-band, we prove that our system can offer an appealing solution in highly dispersive channels.
△ Less
Submitted 9 March, 2024;
originally announced June 2024.
-
Memory Capacity Analysis of Time-delay Reservoir Computing Based on Silicon Microring Resonator Nonlinearities
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide…
▽ More
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide between the through and add ports of the MRR, it is possible to implement a time-delay RC (TDRC) with enhanced memory. The input from the through port is fed back into the add port of the ring with the delay applied by the external waveguide effectively adding memory. In a TDRC, the nodes are multiplexed in time, and their respective time evolutions are detected at the drop port. The performance of MRR-based TDRC is highly dependent on the amount of nonlinearity in the MRR. The nonlinear effects, in turn, are dependent on the physical properties of the MRR as they determine the lifetime of the effects. Another factor to take into account is the stability of the MRR response, as strong time-domain discontinuities at the drop port are known to emerge from FCD nonlinearities due to self-pulsing (high nonlinear behaviour). However, quantifying the right amount of nonlinearity that RC needs for a certain task in order to achieve optimum performance is challenging. Therefore, further analysis is required to fully understand the nonlinear dynamics of this TDRC setup. Here, we quantify the nonlinear and linear memory capacity of the previously described microring-based TDRC scheme, as a function of the time constants of the generated carriers and the thermal of the TO effects. We analyze the properties of the TDRC dynamics that generate the parameter space, in terms of input signal power and frequency detuning range, over which conventional RC tasks can be satisfactorily performed by the TDRC scheme.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
End-to-End Learning of Pulse-Shaper and Receiver Filter in the Presence of Strong Intersymbol Interference
Authors:
Søren Føns Nielsen,
Francesco Da Ros,
Mikkel N. Schmidt,
Darko Zibar
Abstract:
We numerically demonstrate that joint optimization of FIR based pulse-shaper and receiver filter results in an improved system performance, and shorter filter lengths (lower complexity), for 4-PAM 100 GBd IM/DD systems.
We numerically demonstrate that joint optimization of FIR based pulse-shaper and receiver filter results in an improved system performance, and shorter filter lengths (lower complexity), for 4-PAM 100 GBd IM/DD systems.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
End-to-End Optimization of Directly Modulated Laser Links using Chirp-Aware Modeling
Authors:
Sergio Hernandez F.,
Christophe Peucheret,
Francesco Da Ros,
Darko Zibar
Abstract:
The rate and reach of directly-modulated laser links is often limited by the interplay between chirp and fiber chromatic dispersion. We address this by optimizing the transmitter, receiver, bias and peak-to-peak current to the laser jointly. Our approach outperforms Volterra post-equalization at various symbol rates.
The rate and reach of directly-modulated laser links is often limited by the interplay between chirp and fiber chromatic dispersion. We address this by optimizing the transmitter, receiver, bias and peak-to-peak current to the laser jointly. Our approach outperforms Volterra post-equalization at various symbol rates.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
End-to-end Optimization of Optical Communication Systems based on Directly Modulated Lasers
Authors:
Sergio Hernandez F.,
Christophe Peucheret,
Francesco Da Ros,
Darko Zibar
Abstract:
The use of directly modulated lasers (DMLs) is attractive in low-power, cost-constrained short-reach optical links. However, their limited modulation bandwidth can induce waveform distortion, undermining their data throughput. Traditional distortion mitigation techniques have relied mainly on the separate training of transmitter-side pre-distortion and receiver-side equalization. This approach ove…
▽ More
The use of directly modulated lasers (DMLs) is attractive in low-power, cost-constrained short-reach optical links. However, their limited modulation bandwidth can induce waveform distortion, undermining their data throughput. Traditional distortion mitigation techniques have relied mainly on the separate training of transmitter-side pre-distortion and receiver-side equalization. This approach overlooks the potential gains obtained by simultaneous optimization of transmitter (constellation and pulse sha**) and receiver (equalization and symbol demap**). Moreover, in the context of DML operation, the choice of laser-driving configuration parameters such as the bias current and peak-to-peak modulation current has a significant impact on system performance. We propose a novel end-to-end optimization approach for DML systems, incorporating the learning of bias and peak-to-peak modulation current to the optimization of constellation points, pulse sha** and equalization. The simulation of the DML dynamics is based on the use of the laser rate equations at symbol rates between 15 and 25 Gbaud. The resulting output sequences from the rate equations are used to build a differentiable data-driven model, simplifying the calculation of gradients needed for end-to-end optimization. The proposed end-to-end approach is compared to 3 additional benchmark approaches: the uncompensated system without equalization, a receiver-side finite impulse response equalization approach and an end-to-end approach with learnable pulse shape and nonlinear Volterra equalization but fixed bias and peak-to-peak modulation current. The numerical simulations on the four approaches show that the joint optimization of bias, peak-to-peak current, constellation points, pulse sha** and equalization outperforms all other approaches throughout the tested symbol rates.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Thermal Crosstalk Modelling and Compensation Methods for Programmable Photonic Integrated Circuits
Authors:
Isidora Teofilovic,
Ali Cem,
David Sanchez-Jacome,
Daniel Perez-Lopez,
Francesco Da Ros
Abstract:
Photonic integrated circuits play an important role in the field of optical computing, promising faster and more energy-efficient operations compared to their digital counterparts. This advantage stems from the inherent suitability of optical signals to carry out matrix multiplication. However, even deterministic phenomena such as thermal crosstalk make precise programming of photonic chips a chal…
▽ More
Photonic integrated circuits play an important role in the field of optical computing, promising faster and more energy-efficient operations compared to their digital counterparts. This advantage stems from the inherent suitability of optical signals to carry out matrix multiplication. However, even deterministic phenomena such as thermal crosstalk make precise programming of photonic chips a challenging task. Here, we train and experimentally evaluate three models incorporating varying degrees of physics intuition to predict the effect of thermal crosstalk in different locations of an integrated programmable photonic mesh. We quantify the effect of thermal crosstalk by the resonance wavelength shift in the power spectrum of a microring resonator implemented in the chip, achieving modelling errors <0.5 pm. We experimentally validate the models through compensation of the crosstalk-induced wavelength shift. Finally, we evaluate the generalization capabilities of one of the models by employing it to predict and compensate for the effect of thermal crosstalk for parts of the chip it was not trained on, revealing root-mean-square-errors of <2.0 pm.
△ Less
Submitted 19 March, 2024;
originally announced April 2024.
-
BICM-compatible Rate Adaptive Geometric Constellation Sha** Using Optimized Many-to-one Labeling
Authors:
Metodi Plamenov Yankov,
Smaranika Swain,
Ognjen Jovanovic,
Darko Zibar,
Francesco Da Ros
Abstract:
In this paper, a rate adaptive geometric constellation sha** (GCS) scheme which is fully backward-compatible with existing state of the art bit-interleaved coded modulation (BICM) systems is proposed and experimentally demonstrated. The system relies on optimization of the positions of the quadrature amplitude modulation (QAM) points on the I/Q plane for maximized achievable information rate, wh…
▽ More
In this paper, a rate adaptive geometric constellation sha** (GCS) scheme which is fully backward-compatible with existing state of the art bit-interleaved coded modulation (BICM) systems is proposed and experimentally demonstrated. The system relies on optimization of the positions of the quadrature amplitude modulation (QAM) points on the I/Q plane for maximized achievable information rate, while maintaining quantization and fiber nonlinear noise robustness. Furthermore, `dummy' bits are multiplexed with coded bits before map** to symbols. Rate adaptivity is achieved by tuning the ratio of coded and `dummy' bits, while maintaining a fixed forward error-correction block and a fixed modulation format size. The points' positions and their labeling are optimized using automatic differentiation. The proposed GCS scheme is compared to a time-sharing hybrid (TH) QAM modulation and the now mainstream probabilistic amplitude sha** (PAS) scheme. The TH without sha** is outperformed for all studied data rates in a simulated linear channel by up to 0.7 dB. In a linear channel, PAS is shown to outperform the proposed GCS scheme, while similar performances are reported for PAS and the proposed GCS in a simulated nonlinear fiber channel. The GCS scheme is experimentally demonstrated in a multi-span recirculating loop coherent optical fiber transmission system with a total distance of up to 3000 km. Near-continuous zero-error flexible throughput is reported as a function of the transmission distance. Up to 1-2 spans of increased reach gains are achieved at the same net data rate w.r.t. conventional QAM. At a given distance, up to 0.79 bits/2D symbol of gain w.r.t. conventional QAM is achieved. In the experiment, similar performance to PAS is demonstrated.
△ Less
Submitted 13 March, 2024; v1 submitted 10 November, 2023;
originally announced December 2023.
-
Wavelength-multiplexed Delayed Inputs for Memory Enhancement of Microring-based Reservoir Computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
We numerically demonstrate a silicon add-drop microring-based reservoir computing scheme that combines parallel delayed inputs and wavelength division multiplexing. The scheme solves memory-demanding tasks like time-series prediction with good performance without requiring external optical feedback.
We numerically demonstrate a silicon add-drop microring-based reservoir computing scheme that combines parallel delayed inputs and wavelength division multiplexing. The scheme solves memory-demanding tasks like time-series prediction with good performance without requiring external optical feedback.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Generation of electro-optic frequency combs with optimized flatness in a silicon ring resonator modulator
Authors:
Erwan Weckenmann,
Thyago Monteiro,
Uiara Celine de Moura,
Francesco Da Ros,
Laurent Bramerie,
Mathilde Gay,
Diego Pérez-Galacho,
Lucas Deniel,
Frédéric Boeuf,
Delphine Marris-Morini,
Darko Zibar,
Christophe Peucheret
Abstract:
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating…
▽ More
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating point of the RRM. The optimized driving signals are then applied to a silicon RRM. EOFCs containing 7 and 9 lines are synthesized with a power imbalance between the lines of 2.9 dB and 5.4 dB, respectively, compared to 9.4 dB for an optimized 5-line comb generated from a single sinusoidal driving signal.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Multi-Task Wavelength-Multiplexed Reservoir Computing Using a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on…
▽ More
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on the same photonic circuit. In particular, we consider a microring-based time-delay reservoir computing (TDRC) scheme that simultaneously solves three tasks: Time-series prediction, classification, and wireless channel equalization. The scheme relies on time-division multiplexing to avoid the necessity of multiple physical nonlinear nodes, while the tasks are parallelized using wavelength division multiplexing (WDM). The input data modulated on each optical channel is mapped to a higher dimensional space by the nonlinear dynamics of the silicon microring cavity. The carrier wavelength and input power assigned to each optical channel have a high influence on the performance of its respective task. When all tasks operate under the same wavelength/power conditions, our results show that the computing nature of each task is the deciding factor of the level of performance achievable. However, it is possible to achieve good performance for all tasks simultaneously by optimizing the parameters of each optical channel. The variety of applications covered by the tasks shows the versatility of the proposed photonic TDRC scheme. Overall, this work provides insight into the potential of WDM-based schemes for improving the computing capabilities of reservoir computing schemes.
△ Less
Submitted 27 April, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Effects of cavity nonlinearities and linear losses on silicon microring-based reservoir computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series t…
▽ More
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series task NARMA-10. We demonstrate the existence of three regions, defined by the input power and the frequency detuning between the optical source and the microring resonance, that reveal the cavity transition from linear to nonlinear regimes. One of these regions offers very low error in time-series prediction under relatively low input power and number of nodes while the other regions either lack nonlinearity or become unstable. This study provides insight into the design of the MRR and the optimization of its physical properties for improving the prediction performance of time-delay reservoir computing.
△ Less
Submitted 22 December, 2023; v1 submitted 13 October, 2023;
originally announced October 2023.
-
Optimization of Raman amplifiers: a comparison between black-, grey- and white-box modeling
Authors:
Metodi P. Yankov,
Mehran Soltani,
Andrea Carena,
Darko Zibar,
Francesco Da Ros
Abstract:
Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven physics-agnostic models. Here, we compare the capabilities of white-, grey- and black-…
▽ More
Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven physics-agnostic models. Here, we compare the capabilities of white-, grey- and black-box models to achieve a target frequency-distance amplification in a bidirectional Raman amplifier. We show that any of the studied methods can achieve down to 1 dB of frequency-distance flatness over the C-band in a 100-km span. Then, we discuss the models' applicability, advantages, and drawbacks based on the target application scenario, in particular in terms of optimization speed and access to training data.
△ Less
Submitted 11 September, 2023;
originally announced October 2023.
-
Differentiable Machine Learning-Based Modeling for Directly-Modulated Lasers
Authors:
Sergio Hernandez,
Ognjen Jovanovic,
Christophe Peucheret,
Francesco Da Ros,
Darko Zibar
Abstract:
End-to-end learning has become a popular method for joint transmitter and receiver optimization in optical communication systems. Such approach may require a differentiable channel model, thus hindering the optimization of links based on directly modulated lasers (DMLs). This is due to the DML behavior in the large-signal regime, for which no analytical solution is available. In this paper, this p…
▽ More
End-to-end learning has become a popular method for joint transmitter and receiver optimization in optical communication systems. Such approach may require a differentiable channel model, thus hindering the optimization of links based on directly modulated lasers (DMLs). This is due to the DML behavior in the large-signal regime, for which no analytical solution is available. In this paper, this problem is addressed by develo** and comparing differentiable machine learning-based surrogate models. The models are quantitatively assessed in terms of root mean square error and training/testing time. Once the models are trained, the surrogates are then tested in a numerical equalization setup, resembling a practical end-to-end scenario. Based on the numerical investigation conducted, the convolutional attention transformer is shown to outperform the other models considered.
△ Less
Submitted 4 January, 2024; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Low-complexity Samples versus Symbols-based Neural Network Receiver for Channel Equalization
Authors:
Yevhenii Osadchuk,
Ognjen Jovanovic,
Stenio M. Ranzini,
Roman Dischler,
Vahid Aref,
Darko Zibar,
Francesco Da Ros
Abstract:
Low-complexity neural networks (NNs) have successfully been applied for digital signal processing (DSP) in short-reach intensity-modulated directly detected optical links, where chromatic dispersion-induced impairments significantly limit the transmission distance. The NN-based equalizers are usually optimized independently from other DSP components, such as matched filtering. This approach may re…
▽ More
Low-complexity neural networks (NNs) have successfully been applied for digital signal processing (DSP) in short-reach intensity-modulated directly detected optical links, where chromatic dispersion-induced impairments significantly limit the transmission distance. The NN-based equalizers are usually optimized independently from other DSP components, such as matched filtering. This approach may result in lower equalization performance. Alternatively, optimizing a NN equalizer to perform functionalities of multiple DSP blocks may increase transmission reach while kee** the complexity low. In this work, we propose a low-complexity NN that performs samples-to-symbol equalization, meaning that the NN-based equalizer includes match filtering and downsampling. We compare it to a samples-to-sample equalization approach followed by match filtering and downsampling in terms of performance and computational complexity. Both approaches are evaluated using three different types of NNs combined with optical preprocessing. We numerically and experimentally show that the proposed samples-to-symbol equalization approach applied for 32 GBd on-off keying (OOK) signals outperforms the samples-domain alternative kee** the computational complexity low. Additionally, the different types of NN-based equalizers are compared in terms of performance with respect to computational complexity.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Addressing Data Scarcity in Optical Matrix Multiplier Modeling Using Transfer Learning
Authors:
Ali Cem,
Ognjen Jovanovic,
Siqi Yan,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
We present and experimentally evaluate using transfer learning to address experimental data scarcity when training neural network (NN) models for Mach-Zehnder interferometer mesh-based optical matrix multipliers. Our approach involves pre-training the model using synthetic data generated from a less accurate analytical model and fine-tuning with experimental data. Our investigation demonstrates th…
▽ More
We present and experimentally evaluate using transfer learning to address experimental data scarcity when training neural network (NN) models for Mach-Zehnder interferometer mesh-based optical matrix multipliers. Our approach involves pre-training the model using synthetic data generated from a less accurate analytical model and fine-tuning with experimental data. Our investigation demonstrates that this method yields significant reductions in modeling errors compared to using an analytical model, or a standalone NN model when training data is limited. Utilizing regularization techniques and ensemble averaging, we achieve < 1 dB root-mean-square error on the matrix weights implemented by a 3x3 photonic chip while using only 25% of the available data.
△ Less
Submitted 13 November, 2023; v1 submitted 10 August, 2023;
originally announced August 2023.
-
Rate Adaptive Geometric Constellation Sha** Using Autoencoders and Many-To-One Map**
Authors:
Metodi P. Yankov,
Ognjen Jovanovic,
Darko Zibar,
Francesco Da Ros
Abstract:
A many-to-one map** geometric constellation sha** scheme is proposed with a fixed modulation format, fixed FEC engine and rate adaptation with an arbitrarily small step. An autoencoder is used to optimize the labelings and constellation points' positions.
A many-to-one map** geometric constellation sha** scheme is proposed with a fixed modulation format, fixed FEC engine and rate adaptation with an arbitrarily small step. An autoencoder is used to optimize the labelings and constellation points' positions.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Impact of Free-carrier Nonlinearities on Silicon Microring-based Reservoir Computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
We quantify the impact of thermo-optic and free-carrier effects on time-delay reservoir computing using a silicon microring resonator. We identify pump power and frequency detuning ranges with NMSE less than 0.05 for the NARMA-10 task depending on the time constants of the two considered effects.
We quantify the impact of thermo-optic and free-carrier effects on time-delay reservoir computing using a silicon microring resonator. We identify pump power and frequency detuning ranges with NMSE less than 0.05 for the NARMA-10 task depending on the time constants of the two considered effects.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Data-Driven Modeling of Directly-Modulated Lasers
Authors:
Sergio Hernandez Fernandez,
Christophe Peucheret,
Ognjen Jovanovic,
Francesco Da Ros,
Darko Zibar
Abstract:
The end-to-end optimization of links based on directly-modulated lasers may require an analytically differentiable channel. We overcome this problem by develo** and comparing differentiable laser models based on machine learning techniques.
The end-to-end optimization of links based on directly-modulated lasers may require an analytically differentiable channel. We overcome this problem by develo** and comparing differentiable laser models based on machine learning techniques.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Subspace tracking for independent phase noise source separation in frequency combs
Authors:
Aleksandr Razumov,
Holger R. Heebøll,
Mario Dummont,
Osama Terra,
Bozhang Dong,
Jasper Riebesehl,
Poul Varming,
Jens E. Pedersen,
Francesco Da Ros,
John E. Bowers,
Darko Zibar
Abstract:
Advanced digital signal processing techniques in combination with ultra-wideband balanced coherent detection have enabled a new generation of ultra-high speed fiber-optic communication systems, by moving most of the processing functionalities into digital domain. In this paper, we demonstrate how digital signal processing techniques, in combination with ultra-wideband balanced coherent detection c…
▽ More
Advanced digital signal processing techniques in combination with ultra-wideband balanced coherent detection have enabled a new generation of ultra-high speed fiber-optic communication systems, by moving most of the processing functionalities into digital domain. In this paper, we demonstrate how digital signal processing techniques, in combination with ultra-wideband balanced coherent detection can enable optical frequency comb noise characterization techniques with novel functionalities. We propose a measurement method based on subspace tracking, in combination with multi-heterodyne coherent detection, for independent phase noise sources identification, separation and measurement. Our proposed measurement technique offers several benefits. First, it enables the separation of the total phase noise associated with a particular comb-line or -lines into multiple independent phase noise terms associated with different noise sources. Second, it facilitates the determination of the scaling of each independent phase noise term with comb-line number. Our measurement technique can be used to: identify the most dominant source of phase noise; gain a better understanding of the physics behind the phase noise accumulation process; and confirm, already existing, and enable better phase noise models. In general, our measurement technique provides new insights into noise behavior of optical frequency combs.
△ Less
Submitted 18 September, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
Rate Adaptive Autoencoder-based Geometric Constellation Sha**
Authors:
Ognjen Jovanovic,
Metodi P. Yankov,
Francesco Da Ros,
Darko Zibar
Abstract:
An autoencoder is used to optimize bit-to-symbol map**s for geometric constellation sha**. The map**s allow for net rate adaptivity without additional hardware complexity, while achieving up to 300km of transmission distance compared to uniform QAM.
An autoencoder is used to optimize bit-to-symbol map**s for geometric constellation sha**. The map**s allow for net rate adaptivity without additional hardware complexity, while achieving up to 300km of transmission distance compared to uniform QAM.
△ Less
Submitted 28 November, 2022;
originally announced January 2023.
-
Reservoir Computing-based Multi-Symbol Equalization for PAM 4 Short-reach Transmission
Authors:
Yevhenii Osadchuk,
Ognjen Jovanovic,
Darko Zibar,
Francesco Da Ros
Abstract:
We propose spectrum-sliced reservoir computer-based (RC) multi-symbol equalization for 32-GBd PAM4 transmission. RC with 17 symbols at the output achieves an order of magnitude reduction in multiplications/symbol versus single output case while maintaining simple training.
We propose spectrum-sliced reservoir computer-based (RC) multi-symbol equalization for 32-GBd PAM4 transmission. RC with 17 symbols at the output achieves an order of magnitude reduction in multiplications/symbol versus single output case while maintaining simple training.
△ Less
Submitted 29 November, 2022;
originally announced December 2022.
-
Data-efficient Modeling of Optical Matrix Multipliers Using Transfer Learning
Authors:
Ali Cem,
Ognjen Jovanovic,
Siqi Yan,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
We demonstrate transfer learning-assisted neural network models for optical matrix multipliers with scarce measurement data. Our approach uses <10\% of experimental data needed for best performance and outperforms analytical models for a Mach-Zehnder interferometer mesh.
We demonstrate transfer learning-assisted neural network models for optical matrix multipliers with scarce measurement data. Our approach uses <10\% of experimental data needed for best performance and outperforms analytical models for a Mach-Zehnder interferometer mesh.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Geometric Constellation Sha** for Fiber-Optic Channels via End-to-End Learning
Authors:
Ognjen Jovanovic,
Francesco Da Ros,
Darko Zibar,
Metodi P. Yankov
Abstract:
End-to-end learning has become a popular method to optimize a constellation shape of a communication system. When the channel model is differentiable, end-to-end learning can be applied with conventional backpropagation algorithm for optimization of the shape. A variety of optimization algorithms have also been developed for end-to-end learning over a non-differentiable channel model. In this pape…
▽ More
End-to-end learning has become a popular method to optimize a constellation shape of a communication system. When the channel model is differentiable, end-to-end learning can be applied with conventional backpropagation algorithm for optimization of the shape. A variety of optimization algorithms have also been developed for end-to-end learning over a non-differentiable channel model. In this paper, we compare gradient-free optimization method based on the cubature Kalman filter, model-free optimization and backpropagation for end-to-end learning on a fiber-optic channel modeled by the split-step Fourier method. The results indicate that the gradient-free optimization algorithms provide a decent replacement to backpropagation in terms of performance at the expense of computational complexity. Furthermore, the quantization problem of finite bit resolution of the digital-to-analog and analog-to-digital converters is addressed and its impact on geometrically shaped constellations is analysed. Here, the results show that when optimizing a constellation with respect to mutual information, a minimum number of quantization levels is required to achieve sha** gain. For generalized mutual information, the gain is maintained throughout all of the considered quantization levels. Also, the results implied that the autoencoder can adapt the constellation size to the given channel conditions.
△ Less
Submitted 17 May, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Data-driven Modeling of Mach-Zehnder Interferometer-based Optical Matrix Multipliers
Authors:
Ali Cem,
Siqi Yan,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
Photonic integrated circuits are facilitating the development of optical neural networks, which have the potential to be both faster and more energy efficient than their electronic counterparts since optical signals are especially well-suited for implementing matrix multiplications. However, accurate programming of photonic chips for optical matrix multiplication remains a difficult challenge. Her…
▽ More
Photonic integrated circuits are facilitating the development of optical neural networks, which have the potential to be both faster and more energy efficient than their electronic counterparts since optical signals are especially well-suited for implementing matrix multiplications. However, accurate programming of photonic chips for optical matrix multiplication remains a difficult challenge. Here, we describe both simple analytical models and data-driven models for offline training of optical matrix multipliers. We train and evaluate the models using experimental data obtained from a fabricated chip featuring a Mach-Zehnder interferometer mesh implementing 3-by-3 matrix multiplication. The neural network-based models outperform the simple physics-based models in terms of prediction error. Furthermore, the neural network models are also able to predict the spectral variations in the matrix weights for up to 100 frequency channels covering the C-band. The use of neural network models for programming the chip for optical matrix multiplication yields increased performance on multiple machine learning tasks.
△ Less
Submitted 6 March, 2023; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Experimental validation of machine-learning based spectral-spatial power evolution sha** using Raman amplifiers
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a c…
▽ More
We experimentally validate a real-time machine learning framework, capable of controlling the pump power values of Raman amplifiers to shape the signal power evolution in two-dimensions (2D): frequency and fiber distance. In our setup, power values of four first-order counter-propagating pumps are optimized to achieve the desired 2D power profile. The pump power optimization framework includes a convolutional neural network (CNN) followed by differential evolution (DE) technique, applied online to the amplifier setup to automatically achieve the target 2D power profiles. The results on achievable 2D profiles show that the framework is able to guarantee very low maximum absolute error (MAE) (<0.5 dB) between the obtained and the target 2D profiles. Moreover, the framework is tested in a multi-objective design scenario where the goal is to achieve the 2D profiles with flat gain levels at the end of the span, jointly with minimum spectral excursion over the entire fiber length. In this case, the experimental results assert that for 2D profiles with the target flat gain levels, the DE obtains less than 1 dB maximum gain deviation, when the setup is not physically limited in the pump power values. The simulation results also prove that with enough pump power available, better gain deviation (less than 0.6 dB) for higher target gain levels is achievable.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Experimental Validation of Spectral-Spatial Power Evolution Design Using Raman Amplifiers
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly sha** the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps.
We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly sha** the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps.
△ Less
Submitted 16 May, 2022;
originally announced June 2022.
-
Flexible Raman Amplifier Optimization Based on Machine Learning-aided Physical Stimulated Raman Scattering Model
Authors:
Metodi Plamenov Yankov,
Francesco Da Ros,
Uiara Celine de Moura,
Andrea Carena,
Darko Zibar
Abstract:
The problem of Raman amplifier optimization is studied. A differentiable interpolation function is obtained for the Raman gain coefficient using machine learning (ML), which allows for the gradient descent optimization of forward-propagating Raman pumps. Both the frequency and power of an arbitrary number of pumps in a forward pum** configuration are then optimized for an arbitrary data channel…
▽ More
The problem of Raman amplifier optimization is studied. A differentiable interpolation function is obtained for the Raman gain coefficient using machine learning (ML), which allows for the gradient descent optimization of forward-propagating Raman pumps. Both the frequency and power of an arbitrary number of pumps in a forward pum** configuration are then optimized for an arbitrary data channel load and span length. The forward propagation model is combined with an experimentally-trained ML model of a backward-pum** Raman amplifier to jointly optimize the frequency and power of the forward amplifier's pumps and the powers of the backward amplifier's pumps. The joint forward and backward amplifier optimization is demonstrated for an unrepeatered transmission of 250 km. A gain flatness of $<$ 1~dB over 4 THz is achieved. The optimized amplifiers are validated using a numerical simulator.
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Capacity and Achievable Rates of Fading Few-mode MIMO IM/DD Optical Fiber Channels
Authors:
Metodi P. Yankov,
Francesco Da Ros,
Søren Forchhammer,
Lars Gruner-Nielsen
Abstract:
The optical fiber multiple-input multiple-output (MIMO) channel with intensity modulation and direct detection (IM/DD) per spatial path is treated. The spatial dimensions represent the multiple modes employed for transmission and the cross-talk between them originates in the multiplexers and demultiplexers, which are polarization dependent and thus timevarying. The upper bounds from free-space IM/…
▽ More
The optical fiber multiple-input multiple-output (MIMO) channel with intensity modulation and direct detection (IM/DD) per spatial path is treated. The spatial dimensions represent the multiple modes employed for transmission and the cross-talk between them originates in the multiplexers and demultiplexers, which are polarization dependent and thus timevarying. The upper bounds from free-space IM/DD MIMO channels are adapted to the fiber case, and the constellation constrained capacity is constructively estimated using the Blahut-Arimoto algorithm. An autoencoder is then proposed to optimize a practical MIMO transmission in terms of pre-coder and detector assuming channel distribution knowledge at the transmitter. The pre-coders are shown to be robust to changes in the channel.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Spectral and spatial power evolution design with machine learning-enabled Raman amplification
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We present a machine learning (ML) framework for designing desired signal power profiles over the spectral and spatial domains in the fiber span. The proposed framework adjusts the Raman pump power values to obtain the desired two-dimensional (2D) profiles using a convolutional neural network (CNN) followed by the differential evolution (DE) technique. The CNN learns the map** between the 2D pro…
▽ More
We present a machine learning (ML) framework for designing desired signal power profiles over the spectral and spatial domains in the fiber span. The proposed framework adjusts the Raman pump power values to obtain the desired two-dimensional (2D) profiles using a convolutional neural network (CNN) followed by the differential evolution (DE) technique. The CNN learns the map** between the 2D profiles and their corresponding pump power values using a data-set generated by exciting the amplification setup. Nonetheless, its performance is not accurate for designing 2D profiles of practical interest, such as a 2D flat or a 2D symmetric (with respect to the middle point in distance). To adjust the pump power values more accurately, the DE fine-tunes the power values initialized by the CNN to design the proposed 2D profile with a lower cost value. In the fine-tuning process, the DE employs the direct amplification model which consists of 8 bidirectional propagating pumps, including 2 second-order and 6 first order, in an 80 km fiber span. We evaluate the framework to design broadband 2D flat and symmetric power profiles, as two goals for wavelength division multiplexing (WDM) system performing over the whole C-band. Results indicate the framework's ability to achieve maximum power excursion of 2.81 dB for a 2D flat, and maximum asymmetry of 14% for a 2D symmetric profile.
△ Less
Submitted 25 November, 2021;
originally announced December 2021.
-
Comparison of Models for Training Optical Matrix Multipliers in Neuromorphic PICs
Authors:
Ali Cem,
Siqi Yan,
Uiara Celine de Moura,
Yunhong Ding,
Darko Zibar,
Francesco Da Ros
Abstract:
We experimentally compare simple physics-based vs. data-driven neural-network-based models for offline training of programmable photonic chips using Mach-Zehnder interferometer meshes. The neural-network model outperforms physics-based models for a chip with thermal crosstalk, yielding increased testing accuracy.
We experimentally compare simple physics-based vs. data-driven neural-network-based models for offline training of programmable photonic chips using Mach-Zehnder interferometer meshes. The neural-network model outperforms physics-based models for a chip with thermal crosstalk, yielding increased testing accuracy.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
End-to-end Learning of a Constellation Shape Robust to Channel Condition Uncertainties
Authors:
Ognjen Jovanovic,
Metodi P. Yankov,
Francesco Da Ros,
Darko Zibar
Abstract:
Vendor interoperability is one of the desired future characteristics of optical networks. This means that the transmission system needs to support a variety of hardware with different components, leading to system uncertainties throughout the network. For example, uncertainties in signal-to-noise ratio and laser linewidth can negatively affect the quality of transmission within an optical network…
▽ More
Vendor interoperability is one of the desired future characteristics of optical networks. This means that the transmission system needs to support a variety of hardware with different components, leading to system uncertainties throughout the network. For example, uncertainties in signal-to-noise ratio and laser linewidth can negatively affect the quality of transmission within an optical network due to e.g. mis-parametrization of the transceiver signal processing algorithms. In this paper, we propose to geometrically optimize a constellation shape that is robust to uncertainties in the channel conditions by utilizing end-to-end learning. In the optimization step, the channel model includes additive noise and residual phase noise. In the testing step, the channel model consists of laser phase noise, additive noise and blind phase search as the carrier phase recovery algorithm. Two noise models are considered for the additive noise: white Gaussian noise and nonlinear interference noise model for fiber nonlinearities. The latter models the behavior of an optical fiber channel more accurately because it considers the nonlinear effects of the optical fiber. For this model, the uncertainty in the signal-to-noise ratio can be divided between amplifier noise figures and launch power variations. For both noise models, our results indicate that the learned constellations are more robust to uncertainties in channel conditions compared to a standard constellation scheme such as quadrature amplitude modulation and standard geometric constellation sha** techniques.
△ Less
Submitted 22 April, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
SNR optimization of multi-span fiber optic communication systems employing EDFAs with non-flat gain and noise figure
Authors:
Metodi Plamenov Yankov,
Pawel Marcin Kaminski,
Henrik Enggaard Hansen,
Francesco Da Ros
Abstract:
Throughput optimization of optical communication systems is a key challenge for current optical networks. The use of gain-flattening filters (GFFs) simplifies the problem at the cost of insertion loss, higher power consumption and potentially poorer performance. In this work, we propose a component wise model of a multi-span transmission system for signal-to-noise (SNR) optimization. A machine-lea…
▽ More
Throughput optimization of optical communication systems is a key challenge for current optical networks. The use of gain-flattening filters (GFFs) simplifies the problem at the cost of insertion loss, higher power consumption and potentially poorer performance. In this work, we propose a component wise model of a multi-span transmission system for signal-to-noise (SNR) optimization. A machine-learning based model is trained for the gain and noise figure spectral profile of a C-band amplifier without a GFF. The model is combined with the Gaussian noise model for nonlinearities in optical fibers including stimulated Raman scattering and the implementation penalty spectral profile measured in back-to-back in order to predict the SNR in each channel of a multi-span wavelength division multiplexed system. All basic components in the system model are differentiable and allow for the gradient descent-based optimization of a system of arbitrary configuration in terms of number of spans and length per span. When the input power profile is optimized for flat and maximized received SNR per channel, the minimum performance in an arbitrary 3-span experimental system is improved by up to 8 dB w.r.t. a system with flat input power profile. An SNR flatness down to 1.2 dB is simultaneously achieved. The model and optimization methods are used to optimize the performance of an example core network, and 0.2 dB of gain is shown w.r.t. solutions that do not take into account nonlinearities. The method is also shown to be beneficial for systems with ideal gain flattening, achieving up to 0.3 dB of gain w.r.t. a flat input power profile.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Approaching the optimum phase measurement in the presence of amplifier noise
Authors:
Darko Zibar,
Jens E. Pedersen,
Poul Varming,
Giovanni Brajato,
Francesco Da Ros
Abstract:
In fundamental papers from 1962 [1, 2], Heffener and Haus showed that it is not possible to construct a linear noiseless amplifier. The implies that the amplifier intrinsic noise sources induce random perturbations on the phase of the incoming optical signal which translates into spectral broadening. To achieve the minimum (quantum noise limited) induced phase fluctuation, and the corresponding mi…
▽ More
In fundamental papers from 1962 [1, 2], Heffener and Haus showed that it is not possible to construct a linear noiseless amplifier. The implies that the amplifier intrinsic noise sources induce random perturbations on the phase of the incoming optical signal which translates into spectral broadening. To achieve the minimum (quantum noise limited) induced phase fluctuation, and the corresponding minimum spectral broadening, an optimum phase measurement method is needed. We demonstrate that a measurement method based on the heterodyne detection and the extended Kalman filtering approaches an optimum phase measurement in the presence of amplifier noise. A penalty of 5 dB (numerical) and 15 dB (experimental) compared to the quantum limited spectral broadening is achieved. For comparison, the conventional phase measurement method's penalty exceeds 30 dB for the measurements. Our results reveal new scientific insights by demonstrating that the impact of amplifier noise can be significantly reduced by using the proposed phase measurement method. An impact is envisioned for the phase-based optical sensing system, as optical amplification could increase sensing distance with the minimum impact on the phase.
△ Less
Submitted 3 September, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
End-to-end Learning of a Constellation Shape Robust to Variations in SNR and Laser Linewidth
Authors:
Ognjen Jovanovic,
Metodi P. Yankov,
Francesco Da Ros,
Darko Zibar
Abstract:
We propose an autoencoder-based geometric sha** that learns a constellation robust to SNR and laser linewidth estimation errors. This constellation maintains sha** gain in mutual information (up to 0.3 bits/symbol) with respect to QAM over various SNR and laser linewidth values.
We propose an autoencoder-based geometric sha** that learns a constellation robust to SNR and laser linewidth estimation errors. This constellation maintains sha** gain in mutual information (up to 0.3 bits/symbol) with respect to QAM over various SNR and laser linewidth values.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Inverse design of Raman amplifier in frequency and distance domain using Convolutional Neural Networks
Authors:
Mehran Soltani,
Francesco Da Ros,
Andrea Carena,
Darko Zibar
Abstract:
We present a Convolutional Neural Network (CNN) architecture for inverse Raman amplifier design. This model aims at finding the pump powers and wavelengths required for a target signal power evolution, both in distance along the fiber and in frequency. Using the proposed framework, the prediction of the pump configuration required to achieve a target power profile is demonstrated numerically with…
▽ More
We present a Convolutional Neural Network (CNN) architecture for inverse Raman amplifier design. This model aims at finding the pump powers and wavelengths required for a target signal power evolution, both in distance along the fiber and in frequency. Using the proposed framework, the prediction of the pump configuration required to achieve a target power profile is demonstrated numerically with high accuracy in C-band considering both counter-propagating and bidirectional pum** schemes. For a distributed Raman amplifier based on a 100 km single-mode fiber, a low mean set (0.51, 0.54 and 0.64 dB) and standard deviation set (0.62, 0.43 and 0.38 dB) of the maximum test error are obtained numerically employing 2 and 3 counter, and 4 bidirectional propagating pumps, respectively.
△ Less
Submitted 21 February, 2021;
originally announced March 2021.
-
All-Optical Nonlinear Pre-Compensation of Long-Reach Unrepeatered Systems
Authors:
Pawel M. Kaminski,
Tiago Sutili,
José Hélio da Cruz Júnior,
Glauco C. C. P. Simões,
Francesco Da Ros,
Metodi P. Yankov,
Henrik E. Hansen,
Anders T. Clausen,
Søren Forchhammer,
Leif K. Oxenløwe,
Rafael C. Figueiredo,
Michael Galili
Abstract:
We numerically demonstrate an all-optical nonlinearity pre-compensation module for state-of-the-art long-reach Raman-amplified unrepeatered links. The compensator design is optimized in terms of propagation symmetry to maximize the performance gains under WDM transmission, achieving 4.0dB and 2.6dB of SNR improvement for 250-km and 350-km links.
We numerically demonstrate an all-optical nonlinearity pre-compensation module for state-of-the-art long-reach Raman-amplified unrepeatered links. The compensator design is optimized in terms of propagation symmetry to maximize the performance gains under WDM transmission, achieving 4.0dB and 2.6dB of SNR improvement for 250-km and 350-km links.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Gradient-free training of autoencoders for non-differentiable communication channels
Authors:
Ognjen Jovanovic,
Metodi Plamenov Yankov,
Francesco Da Ros,
Darko Zibar
Abstract:
Training of autoencoders using the back-propagation algorithm is challenging for non-differential channel models or in an experimental environment where gradients cannot be computed. In this paper, we study a gradient-free training method based on the cubature Kalman filter. To numerically validate the method, the autoencoder is employed to perform geometric constellation sha** on differentiable…
▽ More
Training of autoencoders using the back-propagation algorithm is challenging for non-differential channel models or in an experimental environment where gradients cannot be computed. In this paper, we study a gradient-free training method based on the cubature Kalman filter. To numerically validate the method, the autoencoder is employed to perform geometric constellation sha** on differentiable communication channels, showing the same performance as the back-propagation algorithm. Further investigation is done on a non-differentiable communication channel that includes: laser phase noise, additive white Gaussian noise and blind phase search-based phase noise compensation. Our results indicate that the autoencoder can be successfully optimized using the proposed training method to achieve better robustness to residual phase noise with respect to standard constellation schemes such as Quadrature Amplitude Modulation and Iterative Polar Modulation for the considered conditions.
△ Less
Submitted 19 August, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Simultaneous gain profile design and noise figure prediction for Raman amplifiers using machine learning
Authors:
Uiara Celine de Moura,
Ann Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar,
Francesco Da Ros
Abstract:
A machine learning framework predicting pump powers and noise figure profile for a target distributed Raman amplifier gain profile is experimentally demonstrated. We employ a single-layer neural network to learn the map** from the gain profiles to the pump powers and noise figures. The obtained results show highly-accurate gain profile designs and noise figure predictions, with a maximum error o…
▽ More
A machine learning framework predicting pump powers and noise figure profile for a target distributed Raman amplifier gain profile is experimentally demonstrated. We employ a single-layer neural network to learn the map** from the gain profiles to the pump powers and noise figures. The obtained results show highly-accurate gain profile designs and noise figure predictions, with a maximum error on average of ~0.3dB. This framework provides the comprehensive characterization of the Raman amplifier and thus is a valuable tool for predicting the performance of the next-generation optical communication systems, expected to employ Raman amplification.
△ Less
Submitted 4 March, 2021; v1 submitted 9 December, 2020;
originally announced December 2020.
-
Experimental characterization of Raman amplifier optimization through inverse system design
Authors:
Uiara Celine de Moura,
Francesco Da Ros,
Ann Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar
Abstract:
Optical communication systems are always evolving to support the need for ever-increasing transmission rates. This demand is supported by the growth in complexity of communication systems which are moving towards ultra-wideband transmission and space-division multiplexing. Both directions will challenge the design, modeling, and optimization of devices, subsystems, and full systems. Amplification…
▽ More
Optical communication systems are always evolving to support the need for ever-increasing transmission rates. This demand is supported by the growth in complexity of communication systems which are moving towards ultra-wideband transmission and space-division multiplexing. Both directions will challenge the design, modeling, and optimization of devices, subsystems, and full systems. Amplification is a key functionality to support this growth and in this context, we recently demonstrated a versatile machine learning framework for designing and modeling Raman amplifiers with arbitrary gains. In this paper, we perform a thorough experimental characterization of such machine learning framework. The applicability of the proposed approach, as well as its ability to accurately provide flat and tilted gain-profiles, are tested on several practical fiber types, showing errors below 0.5~dB. Moreover, as channel power optimization is heavily employed to further enhance the transmission rate, the tolerance of the framework to variations in the input signal spectral profile is investigated. Results show that the inverse design can provide highly accurate gain-profile adjustments for different input signal power profiles even not considering this information during the training phase.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Experimental Demonstration of Optoelectronic Equalization for Short-reach Transmission with Reservoir Computing
Authors:
Stenio M. Ranzini,
Roman Dischler,
Francesco da Ros,
Henning Buelow,
Darko Zibar
Abstract:
A receiver with shared complexity between optical and digital domains is experimentally demonstrated. Reservoir computing is used to equalize up to 4 directly-detected optically filtered spectral slices of a 32 GBd OOK signal over up to 80 km of SMF.
A receiver with shared complexity between optical and digital domains is experimentally demonstrated. Reservoir computing is used to equalize up to 4 directly-detected optically filtered spectral slices of a 32 GBd OOK signal over up to 80 km of SMF.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Power Evolution Prediction and Optimization in a Multi-span System Based on Component-wise System Modeling
Authors:
Metodi P. Yankov,
Uiara Celine de Moura,
Francesco Da Ros
Abstract:
Cascades of a machine learning-based EDFA gain model trained on a single physical device and a fully differentiable stimulated Raman scattering fiber model are used to predict and optimize the power profile at the output of an experimental multi-span fully-loaded C-band optical communication system.
Cascades of a machine learning-based EDFA gain model trained on a single physical device and a fully differentiable stimulated Raman scattering fiber model are used to predict and optimize the power profile at the output of an experimental multi-span fully-loaded C-band optical communication system.
△ Less
Submitted 11 September, 2020;
originally announced September 2020.
-
Machine learning-based EDFA Gain Model Generalizable to Multiple Physical Devices
Authors:
Francesco Da Ros,
Uiara Celine de Moura,
Metodi P. Yankov
Abstract:
We report a neural-network based erbium-doped fiber amplifier (EDFA) gain model built from experimental measurements. The model shows low gain-prediction error for both the same device used for training (MSE $\leq$ 0.04 dB$^2$) and different physical units of the same make (generalization MSE $\leq$ 0.06 dB$^2$).
We report a neural-network based erbium-doped fiber amplifier (EDFA) gain model built from experimental measurements. The model shows low gain-prediction error for both the same device used for training (MSE $\leq$ 0.04 dB$^2$) and different physical units of the same make (generalization MSE $\leq$ 0.06 dB$^2$).
△ Less
Submitted 11 September, 2020;
originally announced September 2020.
-
End-to-end optimization of coherent optical communications over the split-step Fourier method guided by the nonlinear Fourier transform theory
Authors:
Simone Gaiarin,
Francesco Da Ros,
Rasmus T. Jones,
Darko Zibar
Abstract:
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencode…
▽ More
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencoders (AEs) can be applied to define symbol-to-waveform (modulation) and waveform-to-symbol (detection) map**s, but so far it has been mainly shown for systems relying on approximate channel models. Here, for the first time, we propose an AE scheme applied to the full optical channel described by the nonlinear Schr\{"o}dinger equation (NLSE). Transmitter and receiver are jointly optimized through the split-step Fourier method (SSFM) which accurately models an optical fiber. In this first numerical analysis, the detection is performed by a neural network (NN), whereas the symbol-to-waveform map** is aided by the nonlinear Fourier transform (NFT) theory in order to simplify and guide the optimization on the modulation side. This proof-of-concept AE scheme is thus benchmarked against a standard NFT-based system and a threefold increase in achievable distance (from 2000 to 6640 km) is demonstrated.
△ Less
Submitted 7 October, 2020; v1 submitted 11 September, 2020;
originally announced September 2020.
-
Multi-band programmable gain Raman amplifier
Authors:
Uiara Celine de Moura,
Md Asif Iqbal,
Morteza Kamalian,
Lukasz Krzczanowicz,
Francesco Da Ros,
Ann Margareth Rosa Brusin,
Andrea Carena,
Wladek Forysiak,
Sergei Turitsyn,
Darko Zibar
Abstract:
Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (…
▽ More
Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (365nm) with loss below 0.4dB/km. A key component in realizing multi-band optical communication systems is the optical amplifier. Apart from having an ultra-wide gain profile, the ability of providing arbitrary gain profiles, in a controlled way, will become an essential feature. The latter will allow for signal power spectrum sha** which has a broad range of applications such as the maximization of the achievable information rate X distance product, the elimination of static and lossy gain flattening filters (GFF) enabling a power efficient system design, and the gain equalization of optical frequency combs. In this paper, we experimentally demonstrate a multi-band (S+C+L) programmable gain optical amplifier using only Raman effects and machine learning. The amplifier achieves >1000 programmable gain profiles within the range from 3.5 to 30 dB, in an ultra-fast way and a very low maximum error of 1.6e-2 dB/THz over an ultra-wide bandwidth of 17.6-THz (140.7-nm).
△ Less
Submitted 23 October, 2020; v1 submitted 22 June, 2020;
originally announced June 2020.
-
Probabilistically Shaped 4-PAM for Short-Reach IM/DD Links with a Peak Power Constraint
Authors:
Thomas Wiegart,
Francesco Da Ros,
Metodi Plamenov Yankov,
Fabian Steiner,
Simone Gaiarin,
Richard Wesel
Abstract:
Probabilistic sha** for intensity modulation and direct detection (IM/DD) links is discussed and a peak power constraint determined by the limited modulation extinction ratio (ER) of optical modulators is introduced. The input distribution of 4-ary unipolar pulse amplitude modulation (PAM) symbols is optimized for short-reach transmission links without optical amplification nor in-line dispersio…
▽ More
Probabilistic sha** for intensity modulation and direct detection (IM/DD) links is discussed and a peak power constraint determined by the limited modulation extinction ratio (ER) of optical modulators is introduced. The input distribution of 4-ary unipolar pulse amplitude modulation (PAM) symbols is optimized for short-reach transmission links without optical amplification nor in-line dispersion compensation. The resulting distribution is symmetric around its mean allowing to use probabilistic amplitude sha** (PAS) to generate symbols that are protected by forward error correction (FEC) and that have the optimal input distribution. The numerical analysis is confirmed experimentally for both an additive white Gaussian noise (AWGN) channel and a fiber channel, showing gains in transmission reach and transmission rate, as well as rate adaptability.
△ Less
Submitted 8 October, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Boosting the secret key rate in a shared quantum and classical fibre communication system
Authors:
Davide Bacco,
Beatrice Da Lio,
Daniele Cozzolino,
Francesco Da Ros,
Xueshi Guo,
Yunhong Ding,
Yusuke Sasaki,
Kazuhiko Aikawa,
Shigehito Miki,
Hirotaka Terai,
Taro Yamashita,
Jonas S. Neergaard-Nielsen,
Michael Galili,
Karsten Rottwitt,
Ulrik L. Andersen,
Toshio Morioka,
Leif K. Oxenløwe
Abstract:
During the last 20 years, the advance of communication technologies has generated multiple exciting applications. However, classical cryptography, commonly adopted to secure current communication systems, can be jeopardized by the advent of quantum computers. Quantum key distribution (QKD) is a promising technology aiming to solve such a security problem. Unfortunately, current implementations of…
▽ More
During the last 20 years, the advance of communication technologies has generated multiple exciting applications. However, classical cryptography, commonly adopted to secure current communication systems, can be jeopardized by the advent of quantum computers. Quantum key distribution (QKD) is a promising technology aiming to solve such a security problem. Unfortunately, current implementations of QKD systems show relatively low key rates, demand low channel noise and use ad hoc devices. In this work, we picture how to overcome the rate limitation by using a 37-core fibre to generate 2.86 Mbit/s per core that can be space multiplexed into the highest secret key rate of 105.7 Mbit/s to date. We also demonstrate, with off-the-shelf equipment, the robustness of the system by co-propagating a classical signal at 370 Gbit/s, paving the way for a shared quantum and classical communication network.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Experimental demonstration of arbitrary Raman gain-profile designs using machine learning
Authors:
Uiara C. de Moura,
Francesco Da Ros,
A. Margareth Rosa Brusin,
Andrea Carena,
Darko Zibar
Abstract:
A machine learning framework for Raman amplifier design is experimentally tested. Performance in terms of maximum error over the gain profile is investigated for various fiber types and lengths, demonstrating highly-accurate designs.
A machine learning framework for Raman amplifier design is experimentally tested. Performance in terms of maximum error over the gain profile is investigated for various fiber types and lengths, demonstrating highly-accurate designs.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Dual-polarization NFDM transmission with continuous and discrete spectral modulation
Authors:
F. Da Ros,
S. Civelli,
S. Gaiarin,
E. P. da Silva,
N. De Renzis,
M. Secondini,
D. Zibar
Abstract:
Nonlinear distortion experienced by signals during their propagation through optical fibers strongly limits the throughput of optical communication systems. Recently, a strong research focus has been dedicated to nonlinearity mitigation and compensation techniques. At the same time, a more disruptive approach, the nonlinear Fourier transform (NFT), aims at designing signaling schemes more suited t…
▽ More
Nonlinear distortion experienced by signals during their propagation through optical fibers strongly limits the throughput of optical communication systems. Recently, a strong research focus has been dedicated to nonlinearity mitigation and compensation techniques. At the same time, a more disruptive approach, the nonlinear Fourier transform (NFT), aims at designing signaling schemes more suited to the nonlinear fiber channel. In a short period, impressive results have been reported by modulating either the continuous spectrum or the discrete spectrum. Additionally, very recent works further introduced the opportunity to modulate both spectra for single polarization transmission. Here, we extend the joint modulation scheme to dual-polarization transmission by introducing the framework to construct a dual-polarization optical signal with the desired continuous and discrete spectra. After a brief analysis of the numerical algorithms used to implement the proposed scheme, the first experimental demonstration of dual-polarization joint nonlinear frequency division multiplexing (NFDM) modulation is reported for up to 3200 km of low-loss transmission fiber. The proposed dual-polarization joint modulation schemes enables to exploit all the degrees of freedom for modulation (both polarizations and both spectra) provided by a single-mode fiber (SMF).
△ Less
Submitted 26 February, 2019;
originally announced March 2019.
-
Perturbation-based FEC-assisted Iterative Nonlinearity Compensation for WDM Systems
Authors:
Edson P. da Silva,
Metodi P. Yankov,
Francesco Da Ros,
Toshio Morioka,
Leif K. Oxenløwe
Abstract:
A perturbation-based nonlinear compensation scheme assisted by a feedback from the forward error correction (FEC) decoder is numerically and experimentally investigated. It is shown by numerical simulations and transmission experiments that a feedback from the FEC decoder enables improved compensation performance, allowing the receiver to operate very close to the full data-aided performance bound…
▽ More
A perturbation-based nonlinear compensation scheme assisted by a feedback from the forward error correction (FEC) decoder is numerically and experimentally investigated. It is shown by numerical simulations and transmission experiments that a feedback from the FEC decoder enables improved compensation performance, allowing the receiver to operate very close to the full data-aided performance bounds. The experimental analysis considers the dispersion uncompensated transmission of a 5 x 32 GBd WDM system with DP-16QAM and DP-64QAM after 4200 km and 1120 km, respectively. The experimental results show that the proposed scheme outperforms single-channel digital backpropagation. A perturbation-based nonlinear compensation scheme assisted by a feedback from the forward error correction (FEC) decoder is numerically and experimentally investigated. It is shown by numerical simulations and transmission experiments that a feedback from the FEC decoder enables improved compensation performance, allowing the receiver to operate very close to the full data-aided performance bounds. The experimental analysis considers the dispersion uncompensated transmission of a 5 x 32 GBd WDM system with DP-16QAM and DP-64QAM after 4200 km and 1120 km, respectively. The experimental results show that the proposed scheme outperforms single-channel digital backpropagation.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Optical wavelength conversion of high bandwidth phase-encoded signals in a high FOM 50cm CMOS compatible waveguide
Authors:
Francesco Da Ros,
Edson Porto da Silva,
Darko Zibar,
Sai T. Chu,
Brent E. Little,
Roberto Morandotti,
Michael Galili,
David J. Moss,
Leif K. Oxenløwe
Abstract:
We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this…
▽ More
We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this is a promising platform for nonlinear optical signal processing, a result of both very low linear propagation loss (less than 0.07 dB/cm) and the large material bandgap that ensures negligible nonlinear loss at telecom wavelengths.
△ Less
Submitted 7 August, 2018;
originally announced August 2018.
