-
Taper-based scattering formulation of the Helmholtz equation to improve the training process of Physics-Informed Neural Networks
Authors:
W. Dörfler,
M. Elasmi,
T. Laufer
Abstract:
This work addresses the scattering problem of an incident wave at a junction connecting two semi-infinite waveguides, which we intend to solve using Physics-Informed Neural Networks (PINNs). As with other deep learning-based approaches, PINNs are known to suffer from a spectral bias and from the hyperbolic nature of the Helmholtz equation. This makes the training process challenging, especially fo…
▽ More
This work addresses the scattering problem of an incident wave at a junction connecting two semi-infinite waveguides, which we intend to solve using Physics-Informed Neural Networks (PINNs). As with other deep learning-based approaches, PINNs are known to suffer from a spectral bias and from the hyperbolic nature of the Helmholtz equation. This makes the training process challenging, especially for higher wave numbers. We show an example where these limitations are present. In order to improve the learning capability of our model, we suggest an equivalent formulation of the Helmholtz Boundary Value Problem (BVP) that is based on splitting the total wave into a tapered continuation of the incoming wave and a remaining scattered wave. This allows the introduction of an inhomogeneity in the BVP, leveraging the information transmitted during back-propagation, thus, enhancing and accelerating the training process of our PINN model. The presented numerical illustrations are in accordance with the expected behavior, paving the way to a possible alternative approach to predicting scattering problems using PINNs.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Comparison of Different Elastic Strain Definitions for Largely Deformed SEI of Chemo-Mechanically Coupled Silicon Battery Particles
Authors:
Raphael Schoof,
Giuseppe Fabian Castelli,
Willy Dörfler
Abstract:
Amorphous silicon is a highly promising anode material for next-generation lithium-ion batteries. Large volume changes of the silicon particle have a critical effect on the surrounding solid-electrolyte interphase (SEI) due to repeated fracture and healing during cycling. Based on a thermodynamically consistent chemo-elasto-plastic continuum model we investigate the stress development inside the p…
▽ More
Amorphous silicon is a highly promising anode material for next-generation lithium-ion batteries. Large volume changes of the silicon particle have a critical effect on the surrounding solid-electrolyte interphase (SEI) due to repeated fracture and healing during cycling. Based on a thermodynamically consistent chemo-elasto-plastic continuum model we investigate the stress development inside the particle and the SEI. Using the example of a particle with SEI, we apply a higher order finite element method together with a variable-step, variable-order time integration scheme on a nonlinear system of partial differential equations. Starting from a single silicon particle setting, the surrounding SEI is added in a first step with the typically used elastic Green--St-Venant (GSV) strain definition for a purely elastic deformation. For this type of deformation, the definition of the elastic strain is crucial to get reasonable simulation results. In case of the elastic GSV strain, the simulation aborts. We overcome the simulation failure by using the definition of the logarithmic Hencky strain. However, the particle remains unaffected by the elastic strain definitions in the particle domain. Compared to GSV, plastic deformation with the Hencky strain is straightforward to take into account. For the plastic SEI deformation, a rate-independent and a rate-dependent plastic deformation are newly introduced and numerically compared for three half cycles for the example of a radial symmetric particle.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Residual Based Error Estimator for Chemical-Mechanically Coupled Battery Active Particles
Authors:
Raphael Schoof,
Lennart Flür,
Florian Tuschner,
Willy Dörfler
Abstract:
Adaptive finite element methods are a powerful tool to obtain numerical simulation results in a reasonable time. Due to complex chemical and mechanical couplings in lithium-ion batteries, numerical simulations are very helpful to investigate promising new battery active materials such as amorphous silicon featuring a higher energy density than graphite. Based on a thermodynamically consistent cont…
▽ More
Adaptive finite element methods are a powerful tool to obtain numerical simulation results in a reasonable time. Due to complex chemical and mechanical couplings in lithium-ion batteries, numerical simulations are very helpful to investigate promising new battery active materials such as amorphous silicon featuring a higher energy density than graphite. Based on a thermodynamically consistent continuum model with large deformation and chemo-mechanically coupled approach, we compare three different spatial adaptive refinement strategies: Kelly-, gradient recovery- and residual based error estimation. For the residual based case, the strong formulation of the residual is explicitly derived. With amorphous silicon as example material, we investigate two 3D representative host particle geometries, reduced with symmetry assumptions to a 1D unit interval and a 2D elliptical domain. Our numerical studies show that the Kelly estimator overestimates the error, whereas the gradient recovery estimator leads to lower refinement levels and a good capture of the change of the lithium flux. The residual based error estimator reveals a strong dependency on the cell error part which can be improved by a more suitable choice of constants to be more efficient. In a 2D domain, the concentration has a larger influence on the mesh distribution than the Cauchy stress.
△ Less
Submitted 16 April, 2024; v1 submitted 18 January, 2024;
originally announced January 2024.
-
Modeling and Simulation of Chemo-Elasto-Plastically Coupled Battery Active Particles
Authors:
Raphael Schoof,
Johannes Niermann,
Alexander Dyck,
Thomas Böhlke,
Willy Dörfler
Abstract:
As an anode material for lithium-ion batteries, amorphous silicon offers a significantly higher energy density than the graphite anodes currently used. Alloying reactions of lithium and silicon, however, induce large deformation and lead to volume changes up to 300%. We formulate a thermodynamically consistent continuum model for the chemo-elasto-plastic diffusion-deformation behavior of amorphous…
▽ More
As an anode material for lithium-ion batteries, amorphous silicon offers a significantly higher energy density than the graphite anodes currently used. Alloying reactions of lithium and silicon, however, induce large deformation and lead to volume changes up to 300%. We formulate a thermodynamically consistent continuum model for the chemo-elasto-plastic diffusion-deformation behavior of amorphous silicon and it's alloy with lithium based on finite deformations. In this paper, two plasticity theories, i.e. a rate-independent theory with linear isotropic hardening and a rate-dependent one, are formulated to allow the evolution of plastic deformations and reduce occurring stresses. Using modern numerical techniques, such as higher order finite element methods as well as efficient space and time adaptive solution algorithms, the diffusion-deformation behavior resulting from both theories is compared. In order to further increase the computational efficiency, an automatic differentiation scheme is used, allowing for a significant speed up in assembling time as compared to an algorithmic linearization for the global finite element Newton scheme. Both plastic approaches lead to a more heterogeneous concentration distribution and to a change to tensile tangential Cauchy stresses at the particle surface at the end of one charging cycle. Different parameter studies show how an amplification of the plastic deformation is affected. Interestingly, an elliptical particle shows only plastic deformation at the smaller half axis. With the demonstrated efficiency of the applied methods, results after five charging cycles are also discussed and can provide indications for the performance of lithium-ion batteries in long term use.
△ Less
Submitted 6 May, 2024; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Adaptive mesh refinement for the Landau-Lifshitz-Gilbert equation
Authors:
Jan Bohn,
Willy Dörfler,
Michael Feischl,
Stefan Karch
Abstract:
We propose a new adaptive algorithm for the approximation of the Landau-Lifshitz-Gilbert equation via a higher-order tangent plane scheme. We show that the adaptive approximation satisfies an energy inequality and demonstrate numerically, that the adaptive algorithm outperforms uniform approaches.
We propose a new adaptive algorithm for the approximation of the Landau-Lifshitz-Gilbert equation via a higher-order tangent plane scheme. We show that the adaptive approximation satisfies an energy inequality and demonstrate numerically, that the adaptive algorithm outperforms uniform approaches.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Simulation of the Deformation for Cycling Chemo-Mechanically Coupled Battery Active Particles with Mechanical Constraints
Authors:
R. Schoof,
G. F. Castelli,
W. Dörfler
Abstract:
Next-generation lithium-ion batteries with silicon anodes have positive characteristics due to higher energy densities compared to state-of-the-art graphite anodes. However, the large volume expansion of silicon anodes can cause high mechanical stresses, especially if the battery active particle cannot expand freely. In this article, a thermodynamically consistent continuum model for coupling chem…
▽ More
Next-generation lithium-ion batteries with silicon anodes have positive characteristics due to higher energy densities compared to state-of-the-art graphite anodes. However, the large volume expansion of silicon anodes can cause high mechanical stresses, especially if the battery active particle cannot expand freely. In this article, a thermodynamically consistent continuum model for coupling chemical and mechanical effects of electrode particles is extended by a change in the boundary condition for the displacement via a variational inequality. This switch represents a limited enlargement of the particle swelling or shrinking due to lithium intercalation or deintercalation in the host material, respectively. For inequality constraints as boundary condition a smaller time step size is need as well as a locally finer mesh. The combination of a primal-dual active set algorithm, interpreted as semismooth Newton method, and a spatial and temporal adaptive algorithm allows the efficient numerical investigation based on a finite element method. Using the example of silicon, the chemical and mechanical behavior of one- and two-dimensional representative geometries for a charge-discharge cycle is investigated. Furthermore, the efficiency of the adaptive algorithm is demonstrated. It turns out that the size of the gap has a significant influence on the maximal stress value and the slope of the increase. Especially in two dimension, the obstacle can cause an additional region with a lithium-poor phase.
△ Less
Submitted 6 September, 2023; v1 submitted 15 February, 2023;
originally announced February 2023.
-
Binary mixture flow with free energy lattice Boltzmann methods
Authors:
Stephan Simonis,
Johannes Nguyen,
Samuel J. Avis,
Willy Dörfler,
Mathias J. Krause
Abstract:
We use free energy lattice Boltzmann methods (FRE LBM) to simulate shear and extensional flow of a binary mixture in two and three dimensions. To this end, two classical configurations are digitally twinned, namely a parallel-band device for binary shear flow and a four-roller apparatus for binary extensional flow. The FRE LBM and the test cases are implemented in the open-source C++ framework Ope…
▽ More
We use free energy lattice Boltzmann methods (FRE LBM) to simulate shear and extensional flow of a binary mixture in two and three dimensions. To this end, two classical configurations are digitally twinned, namely a parallel-band device for binary shear flow and a four-roller apparatus for binary extensional flow. The FRE LBM and the test cases are implemented in the open-source C++ framework OpenLB and evaluated for several non-dimensional numbers. Characteristic deformations are captured, where breakup mechanisms occur for critical capillary regimes. Though the known mass leakage for small droplet-domain ratios is observed, suitable mesh sizes show good agreement to analytical predictions and reference results.
△ Less
Submitted 3 December, 2022;
originally announced December 2022.
-
Transformation-optics modeling of 3D-printed freeform waveguides
Authors:
Aleksandar Nesic,
Matthias Blaicher,
Emilio Orlandini,
Tudor Olariu,
Maria Paszkiewicz,
Fernando Negredo,
Pascal Kraft,
Mariia Sukhova,
Andreas Hofmann,
Willy Dörfler,
Carsten Rockstuhl,
Wolfgang Freude,
Christian Koos
Abstract:
Multi-photon lithography allows to complement planar photonic integrated circuits (PIC) by in-situ 3D-printed freeform waveguide structures. However, design and optimization of such freeform waveguides using time-domain Maxwell's equations solvers often requires comparatively large computational volumes, within which the structure of interest only occupies a small fraction, thus leading to poor co…
▽ More
Multi-photon lithography allows to complement planar photonic integrated circuits (PIC) by in-situ 3D-printed freeform waveguide structures. However, design and optimization of such freeform waveguides using time-domain Maxwell's equations solvers often requires comparatively large computational volumes, within which the structure of interest only occupies a small fraction, thus leading to poor computational efficiency. In this paper, we present a solver-independent transformation-optics-(TO-) based technique that allows to greatly reduce the computational effort related to modeling of 3D freeform waveguides. The concept relies on transforming freeform waveguides with curved trajectories into equivalent waveguide structures with modified material properties but geometrically straight trajectories, that can be efficiently fit into rather small cuboid-shaped computational volumes. We demonstrate the viability of the technique and benchmark its performance using a series of different freeform waveguides, achieving a reduction of the simulation time by a factor of 3-6 with a significant potential for further improvement. We also fabricate and experimentally test the simulated waveguides by 3D-printing on a silicon photonic chip, and we find good agreement between the simulated and the measured transmission at $λ= 1550 \textrm{ nm}$.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
The elastic inclusion problem in the (amplitude) phase field crystal model
Authors:
Marco Salvalaglio,
Karthikeyan Chockalingam,
Axel Voigt,
Willy Dörfler
Abstract:
In many processes for crystalline materials such as precipitation, heteroepitaxy, alloying, and phase transformation, lattice expansion or compression of embedded domains occurs. This can significantly alter the mechanical response of the material. Typically, these phenomena are studied macroscopically, thus neglecting the underlying microscopic structure. Here we present the prototypical case of…
▽ More
In many processes for crystalline materials such as precipitation, heteroepitaxy, alloying, and phase transformation, lattice expansion or compression of embedded domains occurs. This can significantly alter the mechanical response of the material. Typically, these phenomena are studied macroscopically, thus neglecting the underlying microscopic structure. Here we present the prototypical case of an elastic inclusion described by a mesoscale model, namely a coarse-grained phase-field crystal model. A spatially-dependent parameter is introduced into the free energy functional to control the local spacing of the lattice structure, effectively prescribing an eigenstrain. The stress field obtained for an elastic inclusion in a 2D triangular lattice is shown to match well with the analytic solution of the Eshelby inclusion problem.
△ Less
Submitted 28 March, 2022; v1 submitted 18 November, 2021;
originally announced November 2021.
-
Coupled Mode Equation Modeling for Out-of-Plane Gap Solitons in 2D Photonic Crystals
Authors:
Tomas Dohnal,
Willy Doerfler
Abstract:
Out-of-plane gap solitons in 2D photonic crystals are optical beams localized in the plane of periodicity of the medium and delocalized in the orthogonal direction, in which they propagate with a nonzero velocity. We study such gap solitons as described by the Kerr nonlinear Maxwell system. Using a model of the nonlinear polarization, which does not generate higher harmonics, we obtain a closed cu…
▽ More
Out-of-plane gap solitons in 2D photonic crystals are optical beams localized in the plane of periodicity of the medium and delocalized in the orthogonal direction, in which they propagate with a nonzero velocity. We study such gap solitons as described by the Kerr nonlinear Maxwell system. Using a model of the nonlinear polarization, which does not generate higher harmonics, we obtain a closed curl-curl problem for the fundamental harmonic of the gap soliton. For gap solitons with frequencies inside spectral gaps and in an asymptotic vicinity of a gap edge we use a slowly varying envelope approximation based on the linear Bloch waves at the edge and slowly varying envelopes. We carry out a systematic derivation of the coupled mode equations (CMEs) which govern the envelopes. This derivation needs to be carried out in Bloch variables. The CMEs are a system of coupled nonlinear stationary Schrödinger equations with an additional cross derivative term. Examples of gap soliton approximations are numerically computed for a photonic crystal with a hexagonal periodicity cell and an annulus material structure in the cell.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.