-
Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons
Authors:
Harry Levine,
Arbel Haim,
Jimmy S. C. Hung,
Nasser Alidoust,
Mahmoud Kalaee,
Laura DeLorenzo,
E. Alex Wollack,
Patricio Arrangoiz-Arriola,
Amirhossein Khalajhedayati,
Rohan Sanil,
Hesam Moradinejad,
Yotam Vaknin,
Aleksander Kubica,
David Hover,
Shahriar Aghaeimeibodi,
Joshua Ari Alcid,
Christopher Baek,
James Barnett,
Kaustubh Bawdekar,
Przemyslaw Bienias,
Hugh Carson,
Cliff Chen,
Li Chen,
Harut Chinkezian,
Eric M. Chisholm
, et al. (88 additional authors not shown)
Abstract:
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of…
▽ More
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.
△ Less
Submitted 20 March, 2024; v1 submitted 17 July, 2023;
originally announced July 2023.
-
Solving the 3-SAT problem using network-based biocomputation
Authors:
**gyuan Zhu,
Aseem Salhotra,
Christoph Robert Meinecke,
Pradheebha Surendiran,
Roman Lyttleton,
Danny Reuter,
Hillel Kugler,
Stefan Diez,
Alf Månsson,
Heiner Linke,
Till Korten
Abstract:
The 3-Satisfiability Problem (3-SAT) is a demanding combinatorial problem, of central importance among the non-deterministic polynomial (NP) complete problems, with applications in circuit design, artificial intelligence and logistics. Even with optimized algorithms, the solution space that needs to be explored grows exponentially with increasing size of 3-SAT instances. Thus, large 3-SAT instance…
▽ More
The 3-Satisfiability Problem (3-SAT) is a demanding combinatorial problem, of central importance among the non-deterministic polynomial (NP) complete problems, with applications in circuit design, artificial intelligence and logistics. Even with optimized algorithms, the solution space that needs to be explored grows exponentially with increasing size of 3-SAT instances. Thus, large 3-SAT instances require excessive amounts of energy to solve with serial electronic computers. Network-based biocomputation (NBC) is a multidisciplinary parallel computation approach with drastically reduced energy consumption. NBC uses biomolecular motors to propel cytoskeletal filaments through nanofabricated networks that encode the mathematical problems. By stochastically exploring possible paths through the networks, the cytoskeletal filaments find possible solutions to the encoded problem instance. Here we first report a novel algorithm that converts 3-SAT into NBC-compatible network format. We demonstrate that this algorithm works in practice, by experimentally solving four small 3-SAT instances (with up to 3 variables and 5 clauses) using the actin-myosin biomolecular motor system. This is a key step towards the broad general applicability of NBC because polynomial conversions to 3-SAT exist for a wide set of important NP-complete problems.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Physical requirements for scaling up network-based biocomputation
Authors:
**gyuan Zhu,
Till Korten,
Hillel Kugler,
Falco van Delft,
Alf Månsson,
Danny Reuter,
Stefan Diez,
Heiner Linke
Abstract:
The high energy consumption of electronic data processors, together with physical challenges limiting their further improvement, has triggered intensive interest in alternative computation paradigms. Here we focus on network-based biocomputation (NBC), a massively parallel approach that benefits from the energy efficiency of biological agents, such as molecular motors or bacteria, and their availa…
▽ More
The high energy consumption of electronic data processors, together with physical challenges limiting their further improvement, has triggered intensive interest in alternative computation paradigms. Here we focus on network-based biocomputation (NBC), a massively parallel approach that benefits from the energy efficiency of biological agents, such as molecular motors or bacteria, and their availability in large numbers. We analyse and define the fundamental requirements that need to be fulfilled to scale up NBC computers to become a viable technology that can solve large NP-complete problem instances faster or with less energy consumption than electronic computers. Our work can serve as a guide for further efforts to contribute to elements of future NBC devices, and as the theoretical basis for a detailed NBC roadmap.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Prospects for single-molecule electrostatic detection in molecular motor gliding motility assays
Authors:
M. Sanchez Miranda,
R. Lyttleton,
P. H. Siu,
S. Diez,
H. Linke,
A. P. Micolich
Abstract:
Molecular motor gliding motility assays based on myosin/actin or kinesin/microtubules are of interest for nanotechnology applications ranging from cargo-trafficking in lab-on-a-chip devices to novel biocomputation strategies. Prototype systems are typically monitored by expensive and bulky fluorescence microscopy systems and the development of integrated, direct electric detection of single filame…
▽ More
Molecular motor gliding motility assays based on myosin/actin or kinesin/microtubules are of interest for nanotechnology applications ranging from cargo-trafficking in lab-on-a-chip devices to novel biocomputation strategies. Prototype systems are typically monitored by expensive and bulky fluorescence microscopy systems and the development of integrated, direct electric detection of single filaments would strongly benefit applications and scale-up. We present estimates for the viability of such a detector by calculating the electrostatic potential change generated at a carbon nanotube transistor by a motile actin filament or microtubule under realistic gliding assay conditions. We combine this with detection limits based on previous state-of-the-art experiments using carbon nanotube transistors to detect catalysis by a bound lysozyme molecule and melting of a bound short-strand DNA molecule. Our results show that detection should be possible for both actin and microtubules using existing low ionic strength buffers given good device design, e.g., by raising the transistor slightly above the guiding channel floor. We perform studies as a function of buffer ionic strength, height of the transistor above the guiding channel floor, presence/absence of the casein surface passivation layer for microtubule assays and the linear charge density of the actin filaments/microtubules. We show that detection of microtubules is a more likely prospect given their smaller height of travel above the surface, higher negative charge density and the casein passivation, and may possibly be achieved with the nanoscale transistor sitting directly on the guiding channel floor.
△ Less
Submitted 22 February, 2021; v1 submitted 15 February, 2021;
originally announced February 2021.
-
The ABC130 barrel module prototy** programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Limited Resources Induce Bistability in Microtubule Length Regulation
Authors:
Matthias Rank,
Aniruddha Mitra,
Louis Reese,
Stefan Diez,
Erwin Frey
Abstract:
The availability of protein is an important factor for the determination of the size of the mitotic spindle. Involved in spindle-size regulation is kinesin-8, a molecular motor and microtubule (MT) depolymerase, which is known to tightly control MT length. Here, we propose and analyze a theoretical model in which kinesin-induced MT depolymerization competes with spontaneous polymerization while su…
▽ More
The availability of protein is an important factor for the determination of the size of the mitotic spindle. Involved in spindle-size regulation is kinesin-8, a molecular motor and microtubule (MT) depolymerase, which is known to tightly control MT length. Here, we propose and analyze a theoretical model in which kinesin-induced MT depolymerization competes with spontaneous polymerization while supplies of both tubulin and kinesin are limited. In contrast to previous studies where resources were unconstrained, we find that, for a wide range of concentrations, MT length regulation is bistable. We test our predictions by conducting in vitro experiments, and find that the bistable behavior manifests in a bimodal MT length distribution.
△ Less
Submitted 9 April, 2018; v1 submitted 26 February, 2018;
originally announced February 2018.
-
Prototy** of petalets for the Phase-II Upgrade of the silicon strip tracking detector of the ATLAS Experiment
Authors:
S. Kuehn,
V. Benítez,
J. Fernández-Tejero,
C. Fleta,
M. Lozano,
M. Ullán,
H. Lacker,
L. Rehnisch,
D. Sperlich,
D. Ariza,
I. Bloch,
S. Díez,
I. Gregor,
J. Keller,
K. Lohwasser,
L. Poley,
V. Prahl,
N. Zakharchuk,
M. Hauser,
K. Jakobs,
K. Mahboubi,
R. Mori,
U. Parzefall,
J. Bernabéu,
C. Lacasta
, et al. (9 additional authors not shown)
Abstract:
In the high luminosity era of the Large Hadron Collider, the HL-LHC, the instantaneous luminosity is expected to reach unprecedented values, resulting in about 200 proton-proton interactions in a typical bunch crossing. To cope with the resultant increase in occupancy, bandwidth and radiation damage, the ATLAS Inner Detector will be replaced by an all-silicon system, the Inner Tracker (ITk). The I…
▽ More
In the high luminosity era of the Large Hadron Collider, the HL-LHC, the instantaneous luminosity is expected to reach unprecedented values, resulting in about 200 proton-proton interactions in a typical bunch crossing. To cope with the resultant increase in occupancy, bandwidth and radiation damage, the ATLAS Inner Detector will be replaced by an all-silicon system, the Inner Tracker (ITk). The ITk consists of a silicon pixel and a strip detector and exploits the concept of modularity. Prototy** and testing of various strip detector components has been carried out. This paper presents the developments and results obtained with reduced-size structures equivalent to those foreseen to be used in the forward region of the silicon strip detector. Referred to as petalets, these structures are built around a composite sandwich with embedded cooling pipes and electrical tapes for routing the signals and power. Detector modules built using electronic flex boards and silicon strip sensors are glued on both the front and back side surfaces of the carbon structure. Details are given on the assembly, testing and evaluation of several petalets. Measurement results of both mechanical and electrical quantities are shown. Moreover, an outlook is given for improved prototy** plans for large structures.
△ Less
Submitted 5 November, 2017;
originally announced November 2017.
-
Investigations into the impact of locally modified sensor architectures on the detection efficiency of silicon micro-strip sensors
Authors:
Luise Poley,
Kristin Lohwasser,
Andrew Blue,
Mathieu Benoit,
Ingo Bloch,
Sergio Diez,
Vitaliy Fadeyev,
Bruce Gallop,
Ashley Greenall,
Ingrid-Maria Gregor,
John Keller,
Carlos Lacasta,
Dzmitry Maneuski,
Lingxin Meng,
Marko Milovanovic,
Ian Pape,
Peter W. Phillips,
Laura Rehnisch,
Kawal Sawhney,
Craig Sawyer,
Dennis Sperlich,
Martin Stegler,
Yoshinobu Unno,
Matt Warren,
Eda Yildirim
Abstract:
The High Luminosity Upgrade of the LHC will require the replacement of the Inner Detector of ATLAS with the Inner Tracker (ITk) in order to cope with higher radiation levels and higher track densities. Prototype silicon strip detector modules are currently developed and their performance is studied in both particle test beams and X-ray beams. In previous test beam studies of prototype modules, sil…
▽ More
The High Luminosity Upgrade of the LHC will require the replacement of the Inner Detector of ATLAS with the Inner Tracker (ITk) in order to cope with higher radiation levels and higher track densities. Prototype silicon strip detector modules are currently developed and their performance is studied in both particle test beams and X-ray beams. In previous test beam studies of prototype modules, silicon sensor strips were found to respond in regions varying from the strip pitch of 74.5 {\upmu}m. The variations have been linked to local features of the sensor architecture. This paper presents results of detailed sensor measurements in both X-ray and particle beams investigating the impact of sensor features (metal pads and p-stops) on the responding area of a sensor strip.
△ Less
Submitted 3 July, 2017; v1 submitted 18 November, 2016;
originally announced November 2016.
-
Thermal and hydrodynamic studies for micro-channel cooling for large area silicon sensors in high energy physics experiments
Authors:
Nils Flaschel,
Dario Ariza,
Sergio Diez,
Marta Gerboles,
Ingrid-Maria Gregor,
Xavier Jorda,
Roser Mas,
David Quirion,
Kerstin Tackmann,
Miguel Ullan
Abstract:
Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today`s prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micr…
▽ More
Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today`s prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micro-channel cooling as a candidate for a future cooling system for silicon detectors in a generic research and development approach. The work presented in this paper includes the production and the hydrodynamic and thermal testing of a micro-channel equipped prototype optimized to achieve a homogeneous flow distribution. Furthermore, the device was simulated using finite element methods.
△ Less
Submitted 9 May, 2017; v1 submitted 16 November, 2016;
originally announced November 2016.
-
Characterisation of silicon microstrip detectors for the ATLAS Phase-II Upgrade with a micro-focused X-ray beam
Authors:
Luise Poley,
Andrew Blue,
Richard Bates,
Ingo Bloch,
Sergio Diez,
Javier Fernandez-Tejero,
Celeste Fleta,
Bruce Gallop,
Ashley Greenall,
Ingrid-Maria Gregor,
Kazuhiko Hara,
Yoichi Ikegami,
Carlos Lacasta,
Kristin Lohwasser,
Dzmitry Maneuski,
Sebastian Nagorski,
Ian Pape,
Peter W. Phillips,
Dennis Sperlich,
Kawal Sawhney,
Urmila Soldevila,
Miguel Ullan,
Yoshinobu Unno,
Matt Warren
Abstract:
The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6*10^34 cm^-2 s^-1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb^-1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1*10^16 1 MeV n_eq/cm^2 . In order to cope wi…
▽ More
The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6*10^34 cm^-2 s^-1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb^-1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1*10^16 1 MeV n_eq/cm^2 . In order to cope with the consequent increased readout rates, a complete re-design of the current ATLAS Inner Detector (ID) is being developed as the Inner Tracker (ITk). Two proposed detectors for the ATLAS strip tracker region of the ITk were characterized at the Diamond Light Source with a 3 um FWHM 15 keV micro focused X-ray beam. The devices under test were a 320 Um thick silicon stereo (Barrel) ATLAS12 strip mini sensor wire bonded to a 130 nm CMOS binary readout chip (ABC130) and a 320 Um thick full size radial (end-cap) strip sensor - utilizing bi-metal readout layers - wire bonded to 250 nm CMOS binary readout chips (ABCN-25). A resolution better than the inter strip pitch of the 74.5 um strips was achieved for both detectors. The effect of the p-stop diffusion layers between strips was investigated in detail for the wire bond pad regions. Inter strip charge collection measurements indicate that the effective width of the strip on the silicon sensors is determined by p-stop regions between the strips rather than the strip pitch.
△ Less
Submitted 1 July, 2016; v1 submitted 15 March, 2016;
originally announced March 2016.
-
Silicon strip prototypes for the Phase-II upgrade of the ATLAS tracker for the HL-LHC
Authors:
Sergio Diez
Abstract:
This paper describes the integration structures for the silicon strips tracker of the ATLAS detector proposed for the Phase-II upgrade of the Large Hadron Collider (LHC), also referred to as High Luminosity LHC (HL-LHC). In this proposed detector Silicon strip sensors are arranged in highly modular structures, called `staves' and `petals'. This paper presents performance results from the latest pr…
▽ More
This paper describes the integration structures for the silicon strips tracker of the ATLAS detector proposed for the Phase-II upgrade of the Large Hadron Collider (LHC), also referred to as High Luminosity LHC (HL-LHC). In this proposed detector Silicon strip sensors are arranged in highly modular structures, called `staves' and `petals'. This paper presents performance results from the latest prototype stave built at Berkeley. This new, double-sided prototype is composed of a specialized core structure, in which a shield-less bus tape is embedded in between carbon fiber lay-ups. A detailed description of the prototype and its electrical performance are discussed in detail.
△ Less
Submitted 30 September, 2013;
originally announced October 2013.
-
BioLogistics and the Struggle for Efficiency: Concepts and Perspectives
Authors:
Dirk Helbing,
Andreas Deutsch,
Stefan Diez,
Karsten Peters,
Yannis Kalaidzidis,
Kathrin Padberg,
Stefan Lammer,
Anders Johansson,
Georg Breier,
Frank Schulze,
Marino Zerial
Abstract:
The growth of world population, limitation of resources, economic problems and environmental issues force engineers to develop increasingly efficient solutions for logistic systems. Pure optimization for efficiency, however, has often led to technical solutions that are vulnerable to variations in supply and demand, and to perturbations. In contrast, nature already provides a large variety of effi…
▽ More
The growth of world population, limitation of resources, economic problems and environmental issues force engineers to develop increasingly efficient solutions for logistic systems. Pure optimization for efficiency, however, has often led to technical solutions that are vulnerable to variations in supply and demand, and to perturbations. In contrast, nature already provides a large variety of efficient, flexible and robust logistic solutions. Can we utilize biological principles to design systems, which can flexibly adapt to hardly predictable, fluctuating conditions? We propose a bio-inspired "BioLogistics" approach to deduce dynamic organization processes and principles of adaptive self-control from biological systems, and to transfer them to man-made logistics (including nanologistics), using principles of modularity, self-assembly, self-organization, and decentralized coordination. Conversely, logistic models can help revealing the logic of biological processes at the systems level.
△ Less
Submitted 19 December, 2010;
originally announced December 2010.
