-
Admittance Controller Complemented with Real-time Singularity Avoidance for Rehabilitation Parallel Robots
Authors:
Jose L. Pulloquinga,
Rafael J. Escarabajal,
Marina Valles,
Miguel Diaz-Rodriguez,
Vicente Mata,
Angel Valera
Abstract:
Rehabilitation tasks demand robust and accurate trajectory-tracking performance, mainly achieved with parallel robots. In this field, limiting the value of the force exerted on the patient is crucial, especially when an injured limb is involved. In human-robot interaction studies, the admittance controller modifies the location of the robot according to the user efforts driving the end-effector to…
▽ More
Rehabilitation tasks demand robust and accurate trajectory-tracking performance, mainly achieved with parallel robots. In this field, limiting the value of the force exerted on the patient is crucial, especially when an injured limb is involved. In human-robot interaction studies, the admittance controller modifies the location of the robot according to the user efforts driving the end-effector to an arbitrary location within the workspace. However, a parallel robot has singularities within the workspace, making implementing a conventional admittance controller unsafe. Thus, this study proposes an admittance controller that overcomes the limitations of singular configurations by using a real-time singularity avoidance algorithm. The singularity avoidance algorithm modifies the original trajectory based on the actual location of the parallel robot. The complemented admittance controller is applied to a 4 degrees of freedom parallel robot for knee rehabilitation. In this case, the actual location is measured by a 3D tracking system because the location calculated by the forward kinematics is inaccurate in the vicinity of a singularity. The experimental results verify the effectiveness of the proposed admittance controller for safe knee rehabilitation exercises
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Experimental Analysis of Type II Singularities and Assembly Change Points in a 3UPS+RPU Parallel Robot
Authors:
Jose L. Pulloquinga,
Vicente Mata,
Angel Valera,
Pau Zamora-Ortiz,
Miguel Diaz-Rodriguez,
Ivan Zambrano
Abstract:
Parallel robots (PRs) have singular configurations where the robot gains at least one degree of freedom and loses control. Theoretically, such singularity occurs when the Forward Jacobian-matrix determinant becomes zero (Type II). However, actual PRs could lose control owing to Type II singularities for determinant values near zero, but not zero, because manufacturing tolerances introduce errors t…
▽ More
Parallel robots (PRs) have singular configurations where the robot gains at least one degree of freedom and loses control. Theoretically, such singularity occurs when the Forward Jacobian-matrix determinant becomes zero (Type II). However, actual PRs could lose control owing to Type II singularities for determinant values near zero, but not zero, because manufacturing tolerances introduce errors that are complex to model due to their low repeatability.
Thus, using an actual 3UPS+RPU PR, this paper presents three contributions: i) a proximity detection index for Type II singularities based on the angle between two Output Twist Screws. The index can identify which kinematic chains contribute to the singularity. ii) an experimental benchmark to study Type II singularities. iii) PR configurations where the proposed index is zero and the Forward Jacobian determinant is not. In this last configuration, the findings show that the actual robot is unable to handle external actions applied to the PR.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Mechatronic Design, Experimental Setup and Control Architecture Design of a Novel 4 DoF Parallel Manipulator
Authors:
Marina Valles,
Pedro Araujo-Gomez,
Vicente Mata,
Angel Valera,
Miguel Diaz-Rodriguez,
Alvaro Page,
Nidal M. Farhat
Abstract:
Although parallel manipulators (PMs) started with the introduction of architectures with 6 Degrees of Freedom (DoF), a vast number of applications require less than 6 DoF. Consequently, scholars have proposed architectures with 3 DoF and 4 DoF, but relatively few 4 DoF PMs have become prototypes, especially of the two rotation (2R) and two translation (2T) motion types. In this paper, we explain t…
▽ More
Although parallel manipulators (PMs) started with the introduction of architectures with 6 Degrees of Freedom (DoF), a vast number of applications require less than 6 DoF. Consequently, scholars have proposed architectures with 3 DoF and 4 DoF, but relatively few 4 DoF PMs have become prototypes, especially of the two rotation (2R) and two translation (2T) motion types. In this paper, we explain the mechatronics design, prototype and control architecture design of a 4 DoF PM with 2R2T motions. We chose to design a 4 DoF manipulator based on the motion needed to complete the tasks of lower limb rehabilitation.
To the author's best knowledge, PMs between 3 and 6 DoF for rehabilitation of lower limbs have not been proposed to date. The developed architecture enhances the three minimum DoF required by adding a 4 DoF which allows combinations of normal or tangential efforts in the joints, or torque acting on the knee. We put forward the inverse and forward displacement equations, describe the prototype, perform the experimental setup, and develop the hardware and control architecture. The tracking accuracy experiments from the proposed controller show that the manipulator can accomplish the required application.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Reconfiguration of a parallel kinematic manipulator with 2T2R motions for avoiding singularities through minimizing actuator forces
Authors:
Francisco Valero,
Miguel Diaz-Rodriguez,
Marina Valles,
Antonio Besa,
Enrique Bernabeu,
Angel Valera
Abstract:
This paper aims to develop an approach for the reconfiguration of a parallel kinematic manipulator (PKM) with four degrees of freedom (DoF) designed to tackle tasks of diagnosis and rehabilitation in an injured knee. The original layout of the 4-DoF manipulator presents Type-II singular configurations within its workspace. Thus, we proposed to reconfigure the manipulator to avoid such singularitie…
▽ More
This paper aims to develop an approach for the reconfiguration of a parallel kinematic manipulator (PKM) with four degrees of freedom (DoF) designed to tackle tasks of diagnosis and rehabilitation in an injured knee. The original layout of the 4-DoF manipulator presents Type-II singular configurations within its workspace. Thus, we proposed to reconfigure the manipulator to avoid such singularities (owing to the Forward Jacobian of the PKM) during typical rehabilitation trajectories. We achieve the reconfiguration of the PKM through a minimization problem where the design variables correspond to the anchoring points of the robot limbs on fixed and mobile platforms. The objective function relies on the minimization of the forces exerted by the actuators for a specific trajectory. The minimization problem considers constraint equations to avoid Type-II singularities, which guarantee the feasibility of the active generalized coordinates for a particular path. To evaluate the proposed conceptual strategy, we build a prototype where reconfiguration occurs by moving the position of the anchoring points to holes bored in the fixed and mobile platforms. Simulations and experiments of several study cases enable testing the strategy performance. The results show that the reconfiguration strategy allows obtaining trajectories having minimum actuation forces without Type-II singularities.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
The Masses of Supernova Remnant Progenitors in M33
Authors:
Brad Koplitz,
Jared Johnson,
Benjamin F. Williams,
Mariangelly Diaz-Rodriguez,
Jeremiah W. Murphy,
Margaret Lazzarini,
Joseph Guzman,
Julianne J. Dalcanton,
Andrew Dolphin,
Meredith Durbin
Abstract:
Using resolved optical stellar photometry from the Panchromatic Hubble Andromeda Treasury Triangulum Extended Region (PHATTER) survey, we measured the star formation history (SFH) near the position of 85 supernova remnants (SNRs) in M33. We constrained the progenitor masses for 60 of these SNRs, finding the remaining 25 remnants had no local SF in the last 56 Myr consistent with core-collapse SNe…
▽ More
Using resolved optical stellar photometry from the Panchromatic Hubble Andromeda Treasury Triangulum Extended Region (PHATTER) survey, we measured the star formation history (SFH) near the position of 85 supernova remnants (SNRs) in M33. We constrained the progenitor masses for 60 of these SNRs, finding the remaining 25 remnants had no local SF in the last 56 Myr consistent with core-collapse SNe (CCSNe), making them potential Type Ia candidates. We then infer a progenitor mass distribution from the age distribution, assuming single star evolution. We find that the progenitor mass distribution is consistent with being drawn from a power-law with an index of $-2.9^{+1.2}_{-1.0}$. Additionally, we infer a minimum progenitor mass of $7.1^{+0.1}_{-0.2}\ M_{\odot}$ from this sample, consistent with several previous studies, providing further evidence that stars with ages older than the lifetimes of single 8 $M_{\odot}$ stars are producing supernovae.
△ Less
Submitted 1 April, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
Progenitor Mass Distribution for 22 Historic Core-Collapse Supernovae
Authors:
Mariangelly Díaz-Rodríguez,
Jeremiah W. Murphy,
Benjamin F. Williams,
Julianne J. Dalcanton,
Andrew E. Dolphin
Abstract:
We infer the progenitor mass distribution for 22 historic core-collapse supernovae (CCSNe) using a Bayesian hierarchical model. For this inference, we use the local star formation histories to estimate the age for each supernova (SN). These star formation histories often show multiple bursts of star formation; our model assumes that one burst is associated with the SN progenitor and the others are…
▽ More
We infer the progenitor mass distribution for 22 historic core-collapse supernovae (CCSNe) using a Bayesian hierarchical model. For this inference, we use the local star formation histories to estimate the age for each supernova (SN). These star formation histories often show multiple bursts of star formation; our model assumes that one burst is associated with the SN progenitor and the others are random bursts of star formation. The primary inference is the progenitor age distribution. Due to the limited number of historic SNe and highly uncertain star formation at young ages, we restrict our inference to the slope of the age distribution and the maximum age for CCSNe. Using single-star evolutionary models, we transform the progenitor age distribution into a progenitor mass distribution. Under these assumptions, the minimum mass for CCSNe is ${M_\textrm{min}}~=~8.60^{+0.37}_{-0.41} \ M_\odot$ and the slope of the progenitor mass distribution is $α= -2.61^{+1.05}_{-1.18}$. The power-law slope for the progenitor mass distribution is consistent with the standard Salpeter initial mass function ($α= -2.35$). These values are consistent with previous estimates using precursor imaging and the age-dating technique, further confirming that using stellar populations around SN and supernova remnants is a reliable way to infer the progenitor masses.
△ Less
Submitted 22 June, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Gaia EDR3 confirms that Westerlund 1 is closer and older than previously thought
Authors:
Mojgan Aghakhanloo,
Jeremiah W. Murphy,
Nathan Smith,
John Parejko,
Mariangelly Díaz-Rodríguez,
Maria R. Drout,
Jose H. Groh,
Joseph Guzman,
Keivan G. Stassun
Abstract:
Using {\it Gaia} Early Data Release 3 (EDR3) parallaxes and Bayesian inference, we infer a parallax of the Westerlund 1 (Wd1) cluster. We find a parallax of $0.34\pm{0.05}$ mas corresponding to a distance of $2.8^{+0.7}_{-0.6}$ kpc. The new {\it Gaia} EDR3 distance is consistent with our previous result using {\it Gaia} DR2 parallaxes. This confirms that Wd1 is less massive and older than previous…
▽ More
Using {\it Gaia} Early Data Release 3 (EDR3) parallaxes and Bayesian inference, we infer a parallax of the Westerlund 1 (Wd1) cluster. We find a parallax of $0.34\pm{0.05}$ mas corresponding to a distance of $2.8^{+0.7}_{-0.6}$ kpc. The new {\it Gaia} EDR3 distance is consistent with our previous result using {\it Gaia} DR2 parallaxes. This confirms that Wd1 is less massive and older than previously assumed. Compared to DR2, the EDR3 individual parallax uncertainties for each star decreased by 30\%. However, the aggregate parallax uncertainty for the cluster remained the same. This suggests that the uncertainty is dominated by systematics, which is possibly due to crowding, motions within the cluster, or motions due to binary orbits.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Inferring the parallax of Westerlund 1 from Gaia DR2
Authors:
Mojgan Aghakhanloo,
Jeremiah W. Murphy,
Nathan Smith,
John Parejko,
Mariangelly Díaz-Rodríguez,
Maria R. Drout,
Jose H. Groh,
Joseph Guzman,
Keivan G. Stassun
Abstract:
Westerlund 1 (Wd1) is potentially the largest star cluster in the Galaxy. That designation critically depends upon the distance to the cluster, yet the cluster is highly obscured, making luminosity-based distance estimates difficult. Using {\it Gaia} Data Release 2 (DR2) parallaxes and Bayesian inference, we infer a parallax of $0.35^{+0.07}_{-0.06}$ mas corresponding to a distance of…
▽ More
Westerlund 1 (Wd1) is potentially the largest star cluster in the Galaxy. That designation critically depends upon the distance to the cluster, yet the cluster is highly obscured, making luminosity-based distance estimates difficult. Using {\it Gaia} Data Release 2 (DR2) parallaxes and Bayesian inference, we infer a parallax of $0.35^{+0.07}_{-0.06}$ mas corresponding to a distance of $2.6^{+0.6}_{-0.4}$ kpc. To leverage the combined statistics of all stars in the direction of Wd1, we derive the Bayesian model for a cluster of stars hidden among Galactic field stars; this model includes the parallax zero-point. Previous estimates for the distance to Wd1 ranged from 1.0 to 5.5 kpc, although values around 5 kpc have usually been adopted. The {\it Gaia} DR2 parallaxes reduce the uncertainty from a factor of 3 to 18\% and rules out the most often quoted value of 5 kpc with 99\% confidence. This new distance allows for more accurate mass and age determinations for the stars in Wd1. For example, the previously inferred initial mass at the main-sequence turn-off was around 40 M$_{\odot}$; the new {\it Gaia} DR2 distance shifts this down to about 22 M$_{\odot}$. This has important implications for our understanding of the late stages of stellar evolution, including the initial mass of the magnetar and the LBV in Wd1. Similarly, the new distance suggests that the total cluster mass is about four times lower than previously calculated.
△ Less
Submitted 31 March, 2020; v1 submitted 19 January, 2019;
originally announced January 2019.
-
The Progenitor Age and Mass of the Black-Hole-Formation Candidate N6946-BH1
Authors:
Jeremiah W. Murphy,
Rubab Khan,
Benjamin Williams,
Andrew E. Dolphin,
Julianne Dalcanton,
Mariangelly Díaz-Rodríguez
Abstract:
The failed supernova N6946-BH1 likely formed a black hole (BH); we age-date the surrounding population and infer an age and initial mass for the progenitor of this BH formation candidate. First, we use archival Hubble Space Telescope imaging to extract broadband photometry of the resolved stellar populations surrounding this event. Using this photometry, we fit stellar evolution models to the colo…
▽ More
The failed supernova N6946-BH1 likely formed a black hole (BH); we age-date the surrounding population and infer an age and initial mass for the progenitor of this BH formation candidate. First, we use archival Hubble Space Telescope imaging to extract broadband photometry of the resolved stellar populations surrounding this event. Using this photometry, we fit stellar evolution models to the color-magnitude diagrams to measure the recent star formation history (SFH). Modeling the photometry requires an accurate distance; therefore, we measure the tip of the red giant branch (TRGB) and infer a distance modulus of $29.47 \pm 0.079$ to NGC~6946, or a metric distance of $7.83 \pm 0.29$ Mpc. To estimate the stellar population's age, we convert the SFH and uncertainties into a probabilistic distribution for the progenitor's age. The region in the immediate vicinity of N6946-BH1 exhibits the youngest and most vigorous star formation for several hundred pc. This suggests that the progenitor is not a runaway star. From these measurements, we infer an age for the BH progenitor of $10.6^{+14.5}_{-5.9}$ Myr. Assuming that the progenitor evolved effectively as a single star, this corresponds to an initial mass of $17.9^{+29.9}_{-7.6}$ $M_{\odot}$. Previous spectral energy distribution (SED) modeling of the progenitor suggests a mass of $\sim$27 $M_{\odot}$. Formally, the SED-derived mass falls within our narrowest 68\% confidence interval; however, $91\%$ of the probability distribtuion function we measure lies below that mass, putting some tension between the age and the direct-imaging results.
△ Less
Submitted 11 September, 2018; v1 submitted 28 February, 2018;
originally announced March 2018.
-
Progenitor Mass Distribution for Core-Collapse Supernova Remnants in M31 and M33
Authors:
Mariangelly Díaz-Rodríguez,
Jeremiah W. Murphy,
David A. Rubin,
Andrew E. Dolphin,
Benjamin F. Williams,
Julianne J. Dalcanton
Abstract:
Using the star formation histories (SFHs) near 94 supernova remnants (SNRs), we infer the progenitor mass distribution for core-collapse supernovae. We use Bayesian inference and model each SFH with multiple bursts of star formation (SF), one of which is assumed to be associated with the SNR. Assuming single-star evolution, the minimum mass of CCSNe is $7.33^{+0.02}_{-0.16}$ $\text{M}_\odot$, the…
▽ More
Using the star formation histories (SFHs) near 94 supernova remnants (SNRs), we infer the progenitor mass distribution for core-collapse supernovae. We use Bayesian inference and model each SFH with multiple bursts of star formation (SF), one of which is assumed to be associated with the SNR. Assuming single-star evolution, the minimum mass of CCSNe is $7.33^{+0.02}_{-0.16}$ $\text{M}_\odot$, the slope of the progenitor mass distribution is $α= -2.96^{+0.45}_{-0.25}$, and the maximum mass is greater than $\text{M}_\textrm{max} > 59$ $\text{M}_\odot$ with a 68% confidence. While these results are consistent with previous inferences, they also provide tighter constraints. The progenitor distribution is somewhat steeper than a Salpeter initial mass function ($α$ = -2.35). This suggests that either SNR catalogs are biased against the youngest SF regions, or the most massive stars do not explode as easily as lower mass stars. If SNR catalogs are biased, it will most likely affect the slope but not the minimum mass. The uncertainties are dominated by three primary sources of uncertainty, the SFH resolution, the number of SF bursts, and the uncertainty on SF rate in each age bin. We address the first two of these uncertainties, with an emphasis on multiple bursts. The third will be addressed in future work.
△ Less
Submitted 29 August, 2018; v1 submitted 21 February, 2018;
originally announced February 2018.
-
Development of a passive Rehabilitation Robot for the wrist joint through the implementation of an Arduino UNO microcontroller
Authors:
E Ceballos,
M Díaz-Rodriguez,
P Paredes,
P Vargas
Abstract:
In this research was implemented the use of an Arduino UNO R3 microcontroller to control the movements of a prototype robotic functional developed to perform rehabilitation exercises in the wrist joint; This device can be used to assist the physiatrist to rehabilitate the tendinitis, synovitis, rheumatoid arthritis and for pre-operative and post-operative therapy in this joint. During the design s…
▽ More
In this research was implemented the use of an Arduino UNO R3 microcontroller to control the movements of a prototype robotic functional developed to perform rehabilitation exercises in the wrist joint; This device can be used to assist the physiatrist to rehabilitate the tendinitis, synovitis, rheumatoid arthritis and for pre-operative and post-operative therapy in this joint. During the design stage of the functional prototype, the methodology of the industrial design process was used from a concurrent engineering approach, through which anthropometric studies could be performed related to the dimensions and angles of movement of the wrist joint in the population Venezuelan from the information collected, the design proposal was elaborated, and the use of CAD programs defined the different forms, geometries and materials of the components of the rehabilitation device, which were later analyzed using the finite element method for the determination The tensional state of efforts and safety factors through the use of CAE programs. In addition, a software was developed for the acquisition, registration, reproduction and execution of the different movements produced during the rehabilitation therapy. Through the research developed, a device was designed that will help the rehabilitation of the wrist joint allowing the combination of dorsal-palmar flexion and ulnar-radial movements to recover the joint function of various pathologies presented in the Venezuelan population.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Mathematical modeling of physical capital using the spatial Solow model
Authors:
Gilberto González-Parra,
Benito Chen-Charpentier,
Abraham J. Arenas,
Miguel Diaz-Rodriguez
Abstract:
This research deals with the mathematical modeling of the physical capital diffusion through the borders of the countries. The physical capital is considered an important variable for the economic growth of a country. Here we use an extension of the economic Solow model to describe how the smuggling affects the economic growth of the countries. In this study we rely on a production function that i…
▽ More
This research deals with the mathematical modeling of the physical capital diffusion through the borders of the countries. The physical capital is considered an important variable for the economic growth of a country. Here we use an extension of the economic Solow model to describe how the smuggling affects the economic growth of the countries. In this study we rely on a production function that is non-concave instead of the classical Cobb-Douglas production function. In order to model the physical capital diffusion through the borders of the country, we developed a model based on a parabolic partial differential equation that describes the dynamics of physical capital and boundary conditions of Neumann type. Smuggling is present in many borders between countries and may include fuel, machinery and food. This smuggling through the borders is a problematic issue for the country's economies. The smuggling problem usually is related mainly to a non-official exchange rate that is different than the official rate or subsides. Numerical simulations are obtained using an explicit finite difference scheme that shows how the physical capital diffusion through the border of the countries. The study of physical capital is a paramount issue for the economic growth of many countries for the next years. The results show that the dynamics of the physical capital when boundary conditions of Neumann type are different than zero differ from the classical economic behavior observed in the classical spatial Solow model without physical capital flux through the borders of countries. Finally, it can be concluded that avoiding the smuggling through the frontiers is an important factor that affects the economic growth of the countries.
△ Less
Submitted 16 April, 2015;
originally announced April 2015.
