-
The PLATO Mission
Authors:
Heike Rauer,
Conny Aerts,
Juan Cabrera,
Magali Deleuil,
Anders Erikson,
Laurent Gizon,
Mariejo Goupil,
Ana Heras,
Jose Lorenzo-Alvarez,
Filippo Marliani,
Cesar Martin-Garcia,
J. Miguel Mas-Hesse,
Laurence O'Rourke,
Hugh Osborn,
Isabella Pagano,
Giampaolo Piotto,
Don Pollacco,
Roberto Ragazzoni,
Gavin Ramsay,
Stéphane Udry,
Thierry Appourchaux,
Willy Benz,
Alexis Brandeker,
Manuel Güdel,
Eduardo Janot-Pacheco
, et al. (801 additional authors not shown)
Abstract:
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati…
▽ More
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution.
The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
An extended and refined grid of 3D STAGGER model atmospheres. Processed snapshots for stellar spectroscopy
Authors:
Luisa F. Rodríguez Díaz,
Cis Lagae,
Anish M. Amarsi,
Lionel Bigot,
Yixiao Zhou,
Víctor Aguirre Børsen-Koch,
Karin Lind,
Regner Trampedach,
Remo Collet
Abstract:
Context: Traditional one-dimensional (1D) hydrostatic model atmospheres introduce systematic modelling errors into spectroscopic analyses of FGK-type stars. Aims: We present an updated version of the STAGGER-grid of 3D model atmospheres, and explore the accuracy of post-processing methods in preparation for spectral synthesis. Methods: New and old models were (re)computed following an updated work…
▽ More
Context: Traditional one-dimensional (1D) hydrostatic model atmospheres introduce systematic modelling errors into spectroscopic analyses of FGK-type stars. Aims: We present an updated version of the STAGGER-grid of 3D model atmospheres, and explore the accuracy of post-processing methods in preparation for spectral synthesis. Methods: New and old models were (re)computed following an updated workflow, including an updated opacity binning technique. Spectroscopic tests were performed in 3D LTE for a grid of 216 fictitious Fe I lines, spanning a wide range in oscillator strength, excitation potential and central wavelength, and eight model atmospheres that cover the stellar atmospheric parameter range (Teff, log g, [Fe/H]) of FGK-type stars. Using this grid, the impact of vertical and horizontal resolution, and temporal sampling of model atmospheres on spectroscopic diagnostics was tested. Results: We find that downsampling the horizontal mesh from its original size of 240 x 240 grid cells to 80 x 80 cells, i.e. sampling every third grid cell, introduces minimal errors on the equivalent width and normalized line flux across the line and stellar parameter space. Regarding temporal sampling, we find that sampling ten statistically independent snapshots is sufficient to accurately model the shape of spectral line profiles. For equivalent widths, a subsample consisting of only two snapshots is sufficient, introducing an abundance error of less than 0.015 dex. Conclusions: We have computed 32 new model atmospheres and recomputed 116 old model atmospheres present in the original grid. The public release of the STAGGER-grid contains 243 models, excluding models with [Fe/H] = -4.00, and the processed snapshots can be used to improve the accuracy of spectroscopic analyses.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Raising the observed metallicity floor with a 3D non-LTE analysis of SDSS J102915.14+172927.9
Authors:
C. Lagae,
A. M. Amarsi,
L. F. Rodríguez Díaz,
K. Lind,
T. Nordlander,
T. T. Hansen,
A. Heger
Abstract:
Context: The first stars produced the first heavy elements and set the stage for the formation of the first galaxies. Accurate chemical abundances of ultra metal-poor stars ([Fe/H]<-4) can be used to infer properties of the first stars, and thus the formation mechanism for low-mass second generation stars in the early universe. Spectroscopic studies have shown that most second generation stars are…
▽ More
Context: The first stars produced the first heavy elements and set the stage for the formation of the first galaxies. Accurate chemical abundances of ultra metal-poor stars ([Fe/H]<-4) can be used to infer properties of the first stars, and thus the formation mechanism for low-mass second generation stars in the early universe. Spectroscopic studies have shown that most second generation stars are carbon-enhanced with one notable exception SDSS J102915.14+172927.9. Aims: We reanalyse the composition of SDSS J102915.14+172927.9. Methods: We developed a tailored 3D model atmosphere for SDSS J102915.14+172927.9 with the Stagger-code, making use of an improved surface gravity estimate based on the Gaia DR3 parallax. This model was used as input in the radiative transfer code Balder to compute 3D non-LTE synthetic spectra. These spectra were then used to infer abundances for Mg, Si, Ca, Fe and Ni, and upper limits on Li, Na and Al. 3D LTE synthetic spectra were computed with Scate to infer the abundance of Ti and upper limits on C and N. Results: In contrast to earlier works based on 1D non-LTE corrections to 3D LTE results, we are able to achieve ionisation balance for Ca I and Ca II when employing our consistent 3D non-LTE treatment. Moreover, the elemental abundances are systematically higher than those found in earlier works. In particular, [Fe/H] increases by 0.57 dex, and the upper limits of C and N increase by 0.90 dex and 1.82 dex, respectively. Conclusions: We find that Population III progenitors with masses 10-20 M_sun exploding with energy E<=3*10^{51} erg can reproduce our 3D non-LTE abundance pattern. Contrary to previous work, we obtain higher upper limits on the carbon abundance that are ``marginally consistent'' with star formation through atomic line cooling, and as such, prevent strong conclusions about the formation mechanism of this low mass star.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Connecting photometric and spectroscopic granulation signals with CHEOPS and ESPRESSO
Authors:
S. Sulis,
M. Lendl,
H. Cegla,
L. F. Rodriguez Diaz,
L. Bigot,
V. Van Grootel,
A. Bekkelien,
A. Collier Cameron,
P. F. L. Maxted,
A. E. Simon,
C. Lovis,
G. Scandariato,
G. Bruno,
D. Nardiello,
A. Bonfanti,
M. Fridlund,
C. M. Persson,
S. Salmon,
S. G. Sousa,
T. G. Wilson,
A. Krenn,
S. Hoyer,
A. Santerne,
D. Ehrenreich,
Y. Alibert
, et al. (61 additional authors not shown)
Abstract:
Stellar granulation generates fluctuations in photometric and spectroscopic data whose properties depend on the stellar type, composition, and evolutionary state. In this study, we aim to detect the signatures of stellar granulation, link spectroscopic and photometric signatures of convection for main-sequence stars, and test predictions from 3D hydrodynamic models. For the first time, we observed…
▽ More
Stellar granulation generates fluctuations in photometric and spectroscopic data whose properties depend on the stellar type, composition, and evolutionary state. In this study, we aim to detect the signatures of stellar granulation, link spectroscopic and photometric signatures of convection for main-sequence stars, and test predictions from 3D hydrodynamic models. For the first time, we observed two bright stars (Teff = 5833 K and 6205 K) with high-precision observations taken simultaneously with CHEOPS and ESPRESSO. We analyzed the properties of the stellar granulation signal in each individual data set. We compared them to Kepler observations and 3D hydrodynamic models. While isolating the granulation-induced changes by attenuating the p-mode oscillation signals, we studied the relationship between photometric and spectroscopic observables. The signature of stellar granulation is detected and precisely characterized for the hotter F star in the CHEOPS and ESPRESSO observations. For the cooler G star, we obtain a clear detection in the CHEOPS dataset only. The TESS observations are blind to this stellar signal. Based on CHEOPS observations, we show that the inferred properties of stellar granulation are in agreement with both Kepler observations and hydrodynamic models. Comparing their periodograms, we observe a strong link between spectroscopic and photometric observables. Correlations of this stellar signal in the time domain (flux vs RV) and with specific spectroscopic observables (shape of the cross-correlation functions) are however difficult to isolate due to signal-to-noise dependent variations. In the context of the upcoming PLATO mission and the extreme precision RV surveys, a thorough understanding of the properties of the stellar granulation signal is needed. The CHEOPS and ESPRESSO observations pave the way for detailed analyses of this stellar process.
△ Less
Submitted 6 January, 2023; v1 submitted 25 November, 2022;
originally announced November 2022.
-
Scaling relations of convective granulation noise across the HR diagram from 3D stellar atmosphere models
Authors:
Luisa Fernanda Rodríguez Díaz,
Lionel Bigot,
Víctor Aguirre Børsen-Koch,
Mikkel N. Lund,
Jakob Lysgaard Rørsted,
Thomas Kallinger,
Sophia Sulis,
David Mary
Abstract:
High-precision photometric data from space missions have improved our understanding of stellar granulation. These observations have shown with precision the stochastic brightness fluctuations of stars across the HR diagram, allowing us to better understand how stellar surface convection reacts to a change in stellar parameters. These fluctuations need to be understood and quantified in order to im…
▽ More
High-precision photometric data from space missions have improved our understanding of stellar granulation. These observations have shown with precision the stochastic brightness fluctuations of stars across the HR diagram, allowing us to better understand how stellar surface convection reacts to a change in stellar parameters. These fluctuations need to be understood and quantified in order to improve the detection and characterization of exoplanets. In this work, we provide new scaling relations of two characteristic properties of the brightness fluctuations time series, the standard deviation ($σ$) and the auto-correlation time ($τ\rm_{eff}$). This was done by using long time series of 3D stellar atmosphere models at different metallicities and across the HR diagram, generated with a 3D radiative hydrodynamical code: the STAGGER code. We compared our synthetic granulation properties with the values of a large sample of Kepler stars, and analyzed selected stars with accurate stellar parameters from the Kepler LEGACY sample. Our 3D models showed that $σ\proptoν\rm_{max}^{-0.567\pm0.012}$ and $τ\rm_{eff}\proptoν\rm_{max}^{-0.997\pm0.018}$ for stars at solar metallicity. We showed that both $σ$ and $τ\rm_{eff}$ decrease with metallicity, although the metallicity dependence is more significant on $σ$. Unlike previous studies, we found very good agreement between $σ$ from Kepler targets and the 3D models at $\log{g}\leq3.5$, and a good correlation between the stars and models with $\log{g}\geq3.5$. For $τ\rm_{eff}$, we found that the 3D models reproduced well the Kepler LEGACY star values. Overall, this study shows that 3D stellar atmosphere models reproduce the granulation properties of stars across the HR diagram.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
The SAPP pipeline for the determination of stellar abundances and atmospheric parameters of stars in the core program of the PLATO mission
Authors:
Matthew Raymond Gent,
Maria Bergemann,
Aldo Serenelli,
Luca Casagrande,
Jeffrey M. Gerber,
Ulrike Heiter,
Mikhail Kovalev,
Thierry Morel,
Nicolas Nardetto,
Vardan Adibekyan,
Víctor Silva Aguirre,
Martin Asplund,
Kevin Belkacem,
Carlos del Burgo,
Lionel Bigot,
Andrea Chiavassa,
Luisa Fernanda Rodríguez Díaz,
Marie-Jo Goupil,
Jonay I. González Hernández,
Denis Mourard,
Thibault Merle,
Szabolcs Mészáros,
Douglas J. Marshall,
Rhita-Maria Ouazzani,
Bertrand Plez
, et al. (3 additional authors not shown)
Abstract:
We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general ve…
▽ More
We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general version can have a much wider range of applications. It can also provide masses, ages, and radii of stars and can be used for stars of stellar types not targeted by the PLATO core program, such as red giants. We validate the code on a set of 27 benchmark stars that includes 19 FGK-type dwarfs, 6 GK-type sub-giants, and 2 red giants. Our results suggest that combining various observables is the optimal approach, as it allows to break degeneracies between different parameters and yields more accurate values of stellar parameters and more realistic uncertainties. For the PLATO core sample, we obtain a typical uncertainty of 27 ($\rm{syst.}$) $\pm$ 37 ($\rm{stat.}$) K for T$_{\rm{eff}}$, 0.00 $\pm$ 0.01 dex for log$g$, 0.02 $\pm$ 0.02 dex for metallicity [Fe/H], -0.01 $\pm$ 0.03 R$_\odot$ for radii, -0.01 $\pm$ 0.05 M$_\odot$ for stellar masses, and -0.14 $\pm$ 0.63 Gyrs for ages. We also show that the best results are obtained by combining the $ν_{max}$ scaling relation and stellar spectra. This resolves the notorious problem of degeneracies, which is particularly important for F-type stars.
△ Less
Submitted 20 January, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Detection and characterisation of oscillating red giants: first results from the TESS satellite
Authors:
Víctor Silva Aguirre,
Dennis Stello,
Amalie Stokholm,
Jakob R. Mosumgaard,
Warrick Ball,
Sarbani Basu,
Diego Bossini,
Lisa Bugnet,
Derek Buzasi,
Tiago L. Campante,
Lindsey Carboneau,
William J. Chaplin,
Enrico Corsaro,
Guy R. Davies,
Yvonne Elsworth,
Rafael A. García,
Patrick Gaulme,
Oliver J. Hall,
Rasmus Handberg,
Marc Hon,
Thomas Kallinger,
Liu Kang,
Mikkel N. Lund,
Savita Mathur,
Alexey Mints
, et al. (56 additional authors not shown)
Abstract:
Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate i…
▽ More
Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data
△ Less
Submitted 5 February, 2020; v1 submitted 16 December, 2019;
originally announced December 2019.