-
The SWAP Filter: A Simple Azimuthally Varying Radial Filter for Wide-Field EUV Solar Images
Authors:
Daniel B. Seaton,
David Berghmans,
D. Shaun Bloomfield,
Anik De Groof,
Elke D'Huys,
Bogdan Nicula,
Laurel A. Rachmeler,
Matthew J. West
Abstract:
We present the SWAP Filter: an azimuthally varying, radial normalizing filter specifically developed for EUV images of the solar corona, named for the Sun Watcher with Active Pixels and Image Processing (SWAP) instrument on the Project for On-Board Autonomy 2 spacecraft. We discuss the origins of our technique, its implementation and key user-configurable parameters, and highlight its effects on d…
▽ More
We present the SWAP Filter: an azimuthally varying, radial normalizing filter specifically developed for EUV images of the solar corona, named for the Sun Watcher with Active Pixels and Image Processing (SWAP) instrument on the Project for On-Board Autonomy 2 spacecraft. We discuss the origins of our technique, its implementation and key user-configurable parameters, and highlight its effects on data via a series of examples. We discuss the filter's strengths in a data environment in which wide field-of-view observations that specifically target the low signal-to-noise middle corona are newly available and expected to grow in the coming years.
△ Less
Submitted 19 May, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Prominence eruption observed in He II 304 Å up to $>6 R_\sun$ by EUI/FSI aboard Solar Orbiter
Authors:
M. Mierla,
A. N. Zhukov,
D. Berghmans,
S. Parenti,
F. Auchere,
P. Heinzel,
D. B. Seaton,
E. Palmerio,
S. Jejcic,
J. Janssens,
E. Kraaikamp,
B. Nicula,
D. M. Long,
L. A. Hayes,
I. C. Jebaraj,
D. -C. Talpeanu,
E. D'Huys,
L. Dolla,
S. Gissot,
J. Magdalenic,
L. Rodriguez,
S. Shestov,
K. Stegen,
C. Verbeeck,
C. Sasso
, et al. (2 additional authors not shown)
Abstract:
We report observations of a unique, large prominence eruption that was observed in the He II 304 Å passband of the the Extreme Ultraviolet Imager/Full Sun Imager telescope aboard Solar Orbiter on 15-16 February 2022. Observations from several vantage points (Solar Orbiter, the Solar-Terrestrial Relations Observatory, the Solar and Heliospheric Observatory, and Earth-orbiting satellites) were used…
▽ More
We report observations of a unique, large prominence eruption that was observed in the He II 304 Å passband of the the Extreme Ultraviolet Imager/Full Sun Imager telescope aboard Solar Orbiter on 15-16 February 2022. Observations from several vantage points (Solar Orbiter, the Solar-Terrestrial Relations Observatory, the Solar and Heliospheric Observatory, and Earth-orbiting satellites) were used to measure the kinematics of the erupting prominence and the associated coronal mass ejection. Three-dimensional reconstruction was used to calculate the deprojected positions and speeds of different parts of the prominence. Observations in several passbands allowed us to analyse the radiative properties of the erupting prominence. The leading parts of the erupting prominence and the leading edge of the corresponding coronal mass ejection propagate at speeds of around 1700 km/s and 2200 km/s, respectively, while the trailing parts of the prominence are significantly slower (around 500 km/s). Parts of the prominence are tracked up to heights of over $6 R_\sun$. The He II emission is probably produced via collisional excitation rather than scattering. Surprisingly, the brightness of a trailing feature increases with height. The reported prominence is the first observed in He II 304 Å emission at such a great height (above 6 $R_\sun$).
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
-
Interaction of coronal mass ejections and the solar wind. A force analysis
Authors:
Dana-Camelia Talpeanu,
Stefaan Poedts,
Elke D'Huys,
Marilena Mierla,
Ian G. Richardson
Abstract:
Aims. Our goal is to thoroughly analyse the dynamics of single and multiple solar eruptions, as well as a stealth ejecta. The data were obtained through self-consistent numerical simulations performed in a previous study. We also assess the effect of a different background solar wind on the propagation of these ejecta to Earth.
Methods. We calculated all the components of the forces contributing…
▽ More
Aims. Our goal is to thoroughly analyse the dynamics of single and multiple solar eruptions, as well as a stealth ejecta. The data were obtained through self-consistent numerical simulations performed in a previous study. We also assess the effect of a different background solar wind on the propagation of these ejecta to Earth.
Methods. We calculated all the components of the forces contributing to the evolution of the numerically modelled consecutive coronal mass ejections (CMEs) obtained with the 2.5D magnetohydrodynamics (MHD) module of the code MPI-AMRVAC. We analysed the thermal and magnetic pressure gradients and the magnetic tension dictating the formation of several flux ropes in different locations in the aftermath of the eruptions. These three components were tracked in the equatorial plane during the propagation of the CMEs to Earth. Their interaction with other CMEs and with the background solar wind was also studied.
Results. We explain the formation of the stealth ejecta and the plasma blobs (or plasmoids) occurring in the aftermath of solar eruptions. We also address the faster eruption of a CME in one case with a different background wind, even when the same triggering boundary motions were applied, and attribute this to the slightly different magnetic configuration and the large neighbouring arcade. The thermal pressure gradient revealed a shock in front of these slow eruptions, formed during their propagation to 1 AU. The double-peaked magnetic pressure gradient indicates that the triggering method affects the structure of the CMEs and that a part of the adjacent streamer is ejected along with the CME.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter
Authors:
A. Bemporad,
V. Andretta,
R. Susino,
S. Mancuso,
D. Spadaro,
M. Mierla,
D. Berghmans,
E. D'Huys,
A. N. Zhukov,
D. -C. Talpeanu,
R. Colaninno,
P. Hess,
J. Koza,
S. Jejcic,
P. Heinzel,
E. Antonucci,
V. Da Deppo,
S. Fineschi,
F. Frassati,
G. Jerse,
F. Landini,
G. Naletto,
G. Nicolini,
M. Pancrazzi,
M. Romoli
, et al. (4 additional authors not shown)
Abstract:
On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but al…
▽ More
On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions.
Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-α$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Study of the propagation, in situ signatures, and geoeffectiveness of shear-induced coronal mass ejections in different solar winds
Authors:
Dana-Camelia Talpeanu,
Stefaan Poedts,
Elke D'Huys,
Marilena Mierla
Abstract:
Aims: Our goal is to propagate multiple eruptions - obtained through numerical simulations performed in a previous study - to 1 AU and to analyse the effects of different background solar winds on their dynamics and structure at Earth. We also aim to improve the understanding of why some consecutive eruptions do not result in the expected geoeffectiveness, and how a secondary coronal mass ejection…
▽ More
Aims: Our goal is to propagate multiple eruptions - obtained through numerical simulations performed in a previous study - to 1 AU and to analyse the effects of different background solar winds on their dynamics and structure at Earth. We also aim to improve the understanding of why some consecutive eruptions do not result in the expected geoeffectiveness, and how a secondary coronal mass ejection (CME) can affect the configuration of the preceding one. Methods: Using the 2.5D magnetohydrodynamics (MHD) package of the code MPI-AMRVAC, we numerically modeled consecutive CMEs inserted in two different solar winds by imposing shearing motions onto the inner boundary. The initial magnetic configuration depicts a triple arcade structure shifted southward, and embedded into a bimodal solar wind. We compared our simulated signatures with those of a multiple CME event in Sept 2009 using data from spacecraft around Mercury and Earth. We computed and analysed the Dst index for all the simulations performed. Results: The observed event fits well at 1 AU with two of our simulations, one with a stealth CME and the other without. This highlights the difficulty of attempting to use in situ observations to distinguish whether or not the second eruption was stealthy, because of the processes the flux ropes undergo during their propagation in the interplanetary space. We simulate the CMEs propagated in two different solar winds, one slow and another faster one. Only in the first case, plasma blobs arise in the trail of eruptions. Interestingly, the Dst computation results in a reduced geoeffectiveness in the case of consecutive CMEs when the flux ropes arrive with a leading positive Bz. When the Bz component is reversed, the geoeffectiveness increases, meaning that the magnetic reconnections with the trailing blobs and eruptions strongly affect the impact of the arriving interplanetary CME.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Analysis of large deflections of prominence-CME events during the rising phase of solar cycle 24
Authors:
M. V. Sieyra,
M. Cécere,
H. Cremades,
F. A. Iglesias,
A. Sahade,
M. Mierla,
G. Stenborg,
A. Costa,
M. West,
E. D'Huys
Abstract:
Motivated by the need to improve the ability to forecast whether a certain coronal mass ejection (CME) is to impact Earth, and by the insufficiency of statistical studies that analyze the whole erupting system with the focus on the governing conditions under CME deflections, we performed a careful analysis of 13 events along a one-year time interval showing large deflections from their source regi…
▽ More
Motivated by the need to improve the ability to forecast whether a certain coronal mass ejection (CME) is to impact Earth, and by the insufficiency of statistical studies that analyze the whole erupting system with the focus on the governing conditions under CME deflections, we performed a careful analysis of 13 events along a one-year time interval showing large deflections from their source region. We used telescopes imaging the solar corona at different heights and wavelengths on board the Project for Onboard Autonomy 2 (PROBA2), Solar Dynamics Observatory (SDO), Solar TErrestrial RElations Observatory (STEREO), Solar and Heliospheric Observatory (SOHO) spacecraft and from National Solar Observatory (NSO). By taking advantage of the quadrature position of these spacecraft from October 2010 until September 2011, we inspected the 3D trajectory of CMEs and their associated prominences with respect to their solar sources by means of a tie-pointing tool and a forward model. Considering the coronal magnetic fields as computed from a potential field source surface model, we investigate the roles of magnetic energy distribution and kinematic features in the non-radial propagation of both structures. The magnetic environment present during the eruption is found to be crucial in determining the trajectory of CMEs, in agreement with previous reports.
△ Less
Submitted 20 August, 2020; v1 submitted 28 July, 2020;
originally announced July 2020.
-
Long-term Evolution of the Solar Corona Using PROBA2 Data
Authors:
Marilena Mierla,
Jan Janssens,
Elke D'Huys,
Laurence Wauters,
Matthew J. West,
Daniel B. Seaton,
David Berghmans,
Elena Podladchikova
Abstract:
We use The Sun Watcher with Active Pixel System detector and Image Processing (SWAP) imager onboard the Project for Onboard Autonomy 2 (PROBA2) mission to study the evolution of large-scale EUV structures in the solar corona observed throughout Solar Cycle 24 (from 2010 to 2019). We discuss the evolution of the on-disk coronal features and at different heights above the solar surface based on EUV…
▽ More
We use The Sun Watcher with Active Pixel System detector and Image Processing (SWAP) imager onboard the Project for Onboard Autonomy 2 (PROBA2) mission to study the evolution of large-scale EUV structures in the solar corona observed throughout Solar Cycle 24 (from 2010 to 2019). We discuss the evolution of the on-disk coronal features and at different heights above the solar surface based on EUV intensity changes. We also look at the evolution of the corona in equatorial and polar regions and compare them at different phases of the solar cycle, as well as with sunspot number evolution and with the PROBA2/Lyman-Alpha Radiometer (LYRA) signal. The main results are as follows: The three time series (SWAP on-disk average brightness, sunspot number and LYRA irradiance) are very well correlated, with correlation coefficients around 0.9. The average rotation rate of bright features at latitudes of +15, 0, and -15 degrees was around 15 degree/day throughout the period studied. A secondary peak in EUV averaged intensity at the Poles was observed on the descending phase of SC24. These peaks (at North and South poles respectively) seem to be associated with the start of the development of the (polar) coronal holes. Large-scale off-limb structures were visible from around March 2010 to around March 2016, meaning that they were absent at the minimum phase of solar activity. A fan at the North pole persisted for more than 11 Carrington rotations (February 2014 to March 2015), and it could be seen up to altitudes of 1.6 Rs.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Numerical simulations of shear-induced consecutive coronal mass ejections
Authors:
D. -C. Talpeanu,
E. Chané,
S. Poedts,
E. D'Huys,
M. Mierla,
I. Roussev,
S. Hosteaux
Abstract:
Methods: Stealth CMEs represent a particular class of solar eruptions that are clearly distinguished in coronagraph observations, but they don't have a clear source signature. A particular type of stealth CMEs occurs in the trailing current sheet of a previous ejection, therefore, we used the 2.5D MHD package of the code MPI-AMRVAC to numerically simulate consecutive CMEs by imposing shearing moti…
▽ More
Methods: Stealth CMEs represent a particular class of solar eruptions that are clearly distinguished in coronagraph observations, but they don't have a clear source signature. A particular type of stealth CMEs occurs in the trailing current sheet of a previous ejection, therefore, we used the 2.5D MHD package of the code MPI-AMRVAC to numerically simulate consecutive CMEs by imposing shearing motions onto the inner boundary. The initial magnetic configuration consists of a triple arcade structure embedded into a bimodal solar wind, and the sheared polarity inversion line is found in the southern loop system. The mesh was continuously adapted through a refinement method that applies to current carrying structures. We then compared the obtained eruptions with the observed directions of propagation of an initial multiple coronal mass ejection (MCME) event that occurred in September 2009. We further analysed the simulated ejections by tracking the centre of their flux ropes in latitude and their total speed. Radial Poynting flux computation was employed as well to follow the evolution of electromagnetic energy introduced into the system.
Results: Changes within 1\% in the shearing speed result in three different scenarios for the second CME, although the preceding eruption seems insusceptible to such small variations. Depending on the applied shearing speed, we thus obtain a failed eruption, a stealth, or a CME driven by the imposed shear, as the second ejection. The dynamics of all eruptions are compared with the observed directions of propagation of an MCME event and a good correlation is achieved. The Poynting flux analysis reveals the temporal variation of the important steps of eruptions. For the first time, a stealth CME is simulated in the aftermath of a first eruption, through changes in the applied shearing speed.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Evolution of Coronal Cavity from Quiescent to Eruptive Phase in Association with Coronal Mass Ejection
Authors:
Ranadeep Sarkar,
Nandita Srivastava,
Marilena Mierla,
Matthew J West,
Elke D'Huys
Abstract:
We present the evolution of a coronal cavity encompassing its quiescent and eruptive phases in the lower corona. Using the multi-vantage point observations from the SDO/AIA, STEREO SECCHI/EUVI and PROBA2/SWAP EUV imagers, we capture the sequence of quasi-static equilibria of the quiescent cavity which exhibited a slow rise and expansion phase during its passage on the solar disc from 2010 May 30 t…
▽ More
We present the evolution of a coronal cavity encompassing its quiescent and eruptive phases in the lower corona. Using the multi-vantage point observations from the SDO/AIA, STEREO SECCHI/EUVI and PROBA2/SWAP EUV imagers, we capture the sequence of quasi-static equilibria of the quiescent cavity which exhibited a slow rise and expansion phase during its passage on the solar disc from 2010 May 30 to 2010 June 13. By comparing the decay-index profiles of the cavity system during the different stages of its quiescent and pre-eruptive phases we find that the decay-index value at the cavity centroid height can be used as a good indicator to predict the cavity eruption in the context of torus instability. Combining the observations of SWAP and LASCO C2/C3 we show the evolution of the EUV cavity into the white-light cavity as a three-part structure of the associated CME observed to erupt on 2010 June 13. By applying successive geometrical fits to the cavity morphology we find that the cavity exhibited non self-similar expansion in the lower corona, below 2.2 +/- 0.2 Rs, which points to the spatial scale for the radius of source surface where the coronal magnetic field lines are believed to become radial. Furthermore, the kinematic study of the erupting cavity captures both the "impulsive" and "residual" phases of acceleration along with a strong deflection of the cavity at 1.3 Rs. We also discuss the role of driving forces behind the dynamics of the morphological and kinematic evolution of the cavity.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Density Fluctuations in a Polar Coronal Hole
Authors:
Michael Hahn,
Elke D'Huys,
Daniel Wolf Savin
Abstract:
We have measured the root-mean-square (RMS) amplitude of intensity fluctuations, $ΔI$, in plume and interplume regions of a polar coronal hole. These intensity fluctuations correspond to density fluctuations. Using data from the \rev{Sun Watcher using Active Pixel System detector and Image Processing} (SWAP) on \textit{Project for Onboard Autonomy (Proba2)}, our results extend up to a height of ab…
▽ More
We have measured the root-mean-square (RMS) amplitude of intensity fluctuations, $ΔI$, in plume and interplume regions of a polar coronal hole. These intensity fluctuations correspond to density fluctuations. Using data from the \rev{Sun Watcher using Active Pixel System detector and Image Processing} (SWAP) on \textit{Project for Onboard Autonomy (Proba2)}, our results extend up to a height of about 1.35~$R_{\sun}$. One advantage of the RMS analysis is that it does not rely on a detailed evaluation of the power spectrum, which is limited by noise levels to low heights in the corona. The RMS approach can be performed up to larger heights where the noise level is greater, provided that the noise itself can be quantified. At low heights, both the absolute $ΔI$, and the amplitude relative to the mean intensity, $ΔI/I$, decrease with height. However, starting at about 1.2~$R_{\sun}$ $ΔI/I$ increases, reaching 20--40\% by 1.35~$R_{\sun}$. This corresponds to density fluctuations of $Δn_{\mathrm{e}}/n_{\mathrm{e}} \approx$~10--20\%. The increasing relative amplitude implies that the density fluctuations are generated in the corona itself. One possibility is that the density fluctuations are generated by an instability of Alfvén waves. This generation mechanism is consistent with some theoretical models and with observations of Alfvén wave amplitudes in coronal holes. Although we find that the energy of the observed density fluctuations is small, these fluctuations are likely to play an important indirect role in coronal heating by promoting the reflection of Alfvén waves and driving turbulence.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Solar signatures and eruption mechanism of the 2010 August 14 CME
Authors:
Elke D'Huys,
Daniel B. Seaton,
Anik De Groof,
David Berghmans,
Stefaan Poedts
Abstract:
On 2010 August 14, a wide-angled coronal mass ejection (CME) was observed. This solar eruption originated from a destabilized filament that connected two active regions and the unwinding of this filament gave the eruption an untwisting motion that drew the attention of many observers. In addition to the erupting filament and the associated CME, several other low-coronal signatures that typically i…
▽ More
On 2010 August 14, a wide-angled coronal mass ejection (CME) was observed. This solar eruption originated from a destabilized filament that connected two active regions and the unwinding of this filament gave the eruption an untwisting motion that drew the attention of many observers. In addition to the erupting filament and the associated CME, several other low-coronal signatures that typically indicate the occurrence of a solar eruption were associated to this event. However, contrary to what is expected, the fast CME ($\mathrm{v}>900~\mathrm{km}~\mathrm{s}^{-1}$) was accompanied by only a weak C4.4 flare.
We investigate the various eruption signatures that were observed for this event and focus on the kinematic evolution of the filament in order to determine its eruption mechanism. Had this solar eruption occurred just a few days earlier, it could have been a significant event for space weather. The risk to underestimate the strength of this eruption based solely on the C4.4 flare illustrates the need to include all eruption signatures in event analyses in order to obtain a complete picture of a solar eruption and assess its possible space weather impact.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
The Effect of Limited Sample Sizes on the Accuracy of the Estimated Scaling Parameter for Power-Law-Distributed Solar Data
Authors:
Elke D'Huys,
David Berghmans,
Daniel B. Seaton,
Stefaan Poedts
Abstract:
Many natural processes exhibit power-law behavior. The power-law exponent is linked to the underlying physical process and therefore its precise value is of interest. With respect to the energy content of nanoflares, for example, a power-law exponent steeper than 2 is believed to be a necessary condition to solve the enigmatic coronal heating problem. Studying power-law distributions over several…
▽ More
Many natural processes exhibit power-law behavior. The power-law exponent is linked to the underlying physical process and therefore its precise value is of interest. With respect to the energy content of nanoflares, for example, a power-law exponent steeper than 2 is believed to be a necessary condition to solve the enigmatic coronal heating problem. Studying power-law distributions over several orders of magnitudes requires sufficient data and appropriate methodology. In this paper we demonstrate the shortcomings of some popular methods in solar physics that are applied to data of typical sample sizes. We use synthetic data to study the effect of the sample size on the performance of different estimation methods and show that vast amounts of data are needed to obtain a reliable result with graphical methods (where the power-law exponent is estimated by a linear fit on a log-transformed histogram of the data). We revisit published results on power laws for the angular width of solar coronal mass ejections and the radiative losses of nanoflares. We demonstrate the benefits of the maximum likelihood estimator and advocate its use.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Observational Characteristics of CMEs without Low Coronal Signatures
Authors:
E. D'Huys,
D. B. Seaton,
S. Poedts,
D. Berghmans
Abstract:
Solar eruptions are usually associated with a variety of phenomena occurring in the low corona before, during, and after onset of eruption. Though easily visible in coronagraph observations, so-called stealth coronal mass ejections (CMEs) do not obviously exhibit any of these low-coronal signatures. The presence or absence of distinct low coronal signatures can be linked to different theoretical m…
▽ More
Solar eruptions are usually associated with a variety of phenomena occurring in the low corona before, during, and after onset of eruption. Though easily visible in coronagraph observations, so-called stealth coronal mass ejections (CMEs) do not obviously exhibit any of these low-coronal signatures. The presence or absence of distinct low coronal signatures can be linked to different theoretical models to establish the mechanisms by which the eruption is initiated and driven. In this study, 40 CMEs without low coronal signatures, occurring in 2012, are identified. Their observational and kinematic properties are analyzed and compared to those of regular CMEs. Solar eruptions without clear on-disk or low coronal signatures can lead to unexpected space weather impacts, since many early warning signs for significant space weather activity are not present in these events. A better understanding of their initiation mechanism(s) will considerably improve the ability to predict such space weather events.
△ Less
Submitted 4 September, 2014;
originally announced September 2014.
-
The SWAP EUV Imaging Telescope Part I: Instrument Overview and Pre-Flight Testing
Authors:
D. B. Seaton,
D. Berghmans,
B. Nicula,
J. -P. Halain,
A. De Groof,
T. Thibert,
D. S. Bloomfield,
C. L. Raftery,
P. T. Gallagher,
F. Auchère,
J. -M. Defise,
E. D'Huys,
J. -H. Lecat,
E. Mazy,
P. Rochus,
L. Rossi,
U. Schühle,
V. Slemzin,
M. S. Yalim,
J. Zender
Abstract:
The Sun Watcher with Active Pixels and Image Processing (SWAP) is an EUV solar telescope on board ESA's Project for Onboard Autonomy 2 (PROBA2) mission launched on 2 November 2009. SWAP has a spectral bandpass centered on 17.4 nm and provides images of the low solar corona over a 54x54 arcmin field-of-view with 3.2 arcsec pixels and an imaging cadence of about two minutes. SWAP is designed to moni…
▽ More
The Sun Watcher with Active Pixels and Image Processing (SWAP) is an EUV solar telescope on board ESA's Project for Onboard Autonomy 2 (PROBA2) mission launched on 2 November 2009. SWAP has a spectral bandpass centered on 17.4 nm and provides images of the low solar corona over a 54x54 arcmin field-of-view with 3.2 arcsec pixels and an imaging cadence of about two minutes. SWAP is designed to monitor all space-weather-relevant events and features in the low solar corona. Given the limited resources of the PROBA2 microsatellite, the SWAP telescope is designed with various innovative technologies, including an off-axis optical design and a CMOS-APS detector. This article provides reference documentation for users of the SWAP image data.
△ Less
Submitted 22 August, 2012;
originally announced August 2012.
