-
Emittance preservation in a plasma-wakefield accelerator
Authors:
C. A. Lindstrøm,
J. Beinortaitė,
J. Björklund Svensson,
L. Boulton,
J. Chappell,
S. Diederichs,
B. Foster,
J. M. Garland,
P. González Caminal,
G. Loisch,
F. Peña,
S. Schröder,
M. Thévenet,
S. Wesch,
M. Wing,
J. C. Wood,
R. D'Arcy,
J. Osterhoff
Abstract:
Radio-frequency particle accelerators are engines of discovery, powering high-energy physics and photon science, but are also large and expensive due to their limited accelerating fields. Plasma-wakefield accelerators (PWFAs) provide orders-of-magnitude stronger fields in the charge-density wave behind a particle bunch travelling in a plasma, promising particle accelerators of greatly reduced size…
▽ More
Radio-frequency particle accelerators are engines of discovery, powering high-energy physics and photon science, but are also large and expensive due to their limited accelerating fields. Plasma-wakefield accelerators (PWFAs) provide orders-of-magnitude stronger fields in the charge-density wave behind a particle bunch travelling in a plasma, promising particle accelerators of greatly reduced size and cost. However, PWFAs can easily degrade the beam quality of the bunches they accelerate. Emittance, which determines how tightly beams can be focused, is a critical beam quality in for instance colliders and free-electron lasers, but is particularly prone to degradation. We demonstrate, for the first time, emittance preservation in a high-gradient and high-efficiency PWFA while simultaneously preserving charge and energy spread. This establishes that PWFAs can accelerate without degradation$\unicode{x2014}$essential for energy boosters in photon science and multistage facilities for compact high-energy particle colliders.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
Status of and upgrade concepts for HALHF: the hybrid, asymmetric, linear Higgs factory
Authors:
C. A. Lindstrøm,
R. D'Arcy,
B. Foster
Abstract:
This contribution outlines the HALHF concept, which combines the high gradients achievable in plasma-wakefield acceleration with conventional radio-frequency acceleration. In HALHF, beam-driven plasma-wakefield cells are used to accelerate electrons to high energy. Because plasma-based acceleration of positrons is problematic, conventional RF acceleration is used but to much lower energy. The HALH…
▽ More
This contribution outlines the HALHF concept, which combines the high gradients achievable in plasma-wakefield acceleration with conventional radio-frequency acceleration. In HALHF, beam-driven plasma-wakefield cells are used to accelerate electrons to high energy. Because plasma-based acceleration of positrons is problematic, conventional RF acceleration is used but to much lower energy. The HALHF concept utilises not only asymmetric energies but also asymmetric bunch charges and asymmetric transverse emittances, leading to comparable luminosity to conventional facilities but much lower capital cost. Possible upgrades to the HALHF facility are discussed, in particular to the $\rm{t\bar{t}}$ threshold and to 550 GeV, where the Higgs self-coupling and $\rm{t\bar{t}}H$ coupling can be measured. Other upgrades include the provision of two interaction points, to implement a $γ$$\unicode{x2013}$$γ$ collider of two possible types and finally a symmetric high-energy collider if the problem of plasma-based positron acceleration can be solved.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Energy Depletion and Re-Acceleration of Driver Electrons in a Plasma-Wakefield Accelerator
Authors:
F. Peña,
C. A. Lindstrøm,
J. Beinortaitė,
J. Björklund Svensson,
L. Boulton,
S. Diederichs,
B. Foster,
J. M. Garland,
P. González Caminal,
G. Loisch,
S. Schröder,
M. Thévenet,
S. Wesch,
J. C. Wood,
J. Osterhoff,
R. D'Arcy
Abstract:
For plasma-wakefield accelerators to fulfil their potential for cost effectiveness, it is essential that their energy-transfer efficiency be maximized. A key aspect of this efficiency is the near-complete transfer of energy, or depletion, from the driver electrons to the plasma wake. Achieving full depletion is limited by the process of re-acceleration, which occurs when the driver electrons decel…
▽ More
For plasma-wakefield accelerators to fulfil their potential for cost effectiveness, it is essential that their energy-transfer efficiency be maximized. A key aspect of this efficiency is the near-complete transfer of energy, or depletion, from the driver electrons to the plasma wake. Achieving full depletion is limited by the process of re-acceleration, which occurs when the driver electrons decelerate to non-relativistic energies, slip** backwards into the accelerating phase of the wakefield and being subsequently re-accelerated. Such re-acceleration is observed here for the first time. At this re-acceleration limit, we measure a beam driver depositing (56 $\pm$ 5)% of its energy into a 195-mm-long plasma. Combining this driver-to-plasma efficiency with previously measured plasma-to-beam and expected wall-plug-to-driver efficiencies, our result shows that plasma-wakefield accelerators can in principle reach or even exceed the energy-transfer efficiency of conventional accelerators.
△ Less
Submitted 25 September, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
A hybrid, asymmetric, linear Higgs factory based on plasma-wakefield and radio-frequency acceleration
Authors:
Brian Foster,
Richard D'Arcy,
Carl Andreas Lindstrom
Abstract:
The construction of an electron--positron collider "Higgs factory" has been stalled for a decade, not because of feasibility but because of the cost of conventional radio-frequency (RF) acceleration. Plasma-wakefield acceleration promises to alleviate this problem via significant cost reduction based on its orders-of-magnitude higher accelerating gradients. However, plasma-based acceleration of po…
▽ More
The construction of an electron--positron collider "Higgs factory" has been stalled for a decade, not because of feasibility but because of the cost of conventional radio-frequency (RF) acceleration. Plasma-wakefield acceleration promises to alleviate this problem via significant cost reduction based on its orders-of-magnitude higher accelerating gradients. However, plasma-based acceleration of positrons is much more difficult than for electrons. We propose a collider scheme that avoids positron acceleration in plasma, using a mixture of beam-driven plasma-wakefield acceleration to high energy for the electrons and conventional RF acceleration to low energy for the positrons. We emphasise the benefits of asymmetric energies, asymmetric bunch charges and asymmetric transverse emittances. The implications for luminosity and experimentation at such an asymmetric facility are explored and found to be comparable to conventional facilities; the cost is found to be much lower. Some of the areas in which R\&D is necessary to make HALHF a reality are highlighted,including estimates for the improvement required in key technologies. These range from a factor of 10 to a factor of 1000.
△ Less
Submitted 23 August, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Hadrons at high temperature: an update from the FASTSUM collaboration
Authors:
Jon-Ivar Skullerud,
Gert Aarts,
Chris Allton,
M. Naeem Anwar,
Ryan Bignell,
Tim Burns,
Sergio Chaves García-Mascaraque,
Simon Hands,
Rachel Horohan D'Arcy,
Benjamin Jäger,
Seyong Kim,
Maria Paola Lombardo,
Eoghan Murphy,
Sam Offler,
Ben Page,
Sinéad M. Ryan,
Thomas Spriggs,
Dawid Stasiak,
Felix P. G. Ziegler
Abstract:
We present the most recent results from the FASTSUM collaboration for hadron properties at high temperature. This includes the temperature dependence of the light and charmed meson and baryon spectrum, as well as properties of heavy quarkonia. The results are obtained using anisotropic lattices with a fixed scale approach. We also present the status of our next generation gauge ensembles.
We present the most recent results from the FASTSUM collaboration for hadron properties at high temperature. This includes the temperature dependence of the light and charmed meson and baryon spectrum, as well as properties of heavy quarkonia. The results are obtained using anisotropic lattices with a fixed scale approach. We also present the status of our next generation gauge ensembles.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Longitudinally resolved measurement of energy-transfer efficiency in a plasma-wakefield accelerator
Authors:
L. Boulton,
C. A. Lindstrøm,
J. Beinortaite,
J. Björklund Svensson,
J. M. Garland,
P. González Caminal,
B. Hidding,
G. Loisch,
F. Peña,
K. Põder,
S. Schröder,
S. Wesch,
J. C. Wood,
J. Osterhoff,
R. D'Arcy
Abstract:
Energy-transfer efficiency is an important quantity in plasma-wakefield acceleration, especially for applications that demand high average power. Conventionally, the efficiency is measured using an electron spectrometer; an invasive method that provides an energy-transfer efficiency averaged over the full length of the plasma accelerator. Here, we experimentally demonstrate a novel diagnostic util…
▽ More
Energy-transfer efficiency is an important quantity in plasma-wakefield acceleration, especially for applications that demand high average power. Conventionally, the efficiency is measured using an electron spectrometer; an invasive method that provides an energy-transfer efficiency averaged over the full length of the plasma accelerator. Here, we experimentally demonstrate a novel diagnostic utilizing the excess light emitted by the plasma after a beam-plasma interaction, which yields noninvasive, longitudinally resolved measurements of the local energy-transfer efficiency from the wake to the accelerated bunch; here, as high as (58 $\pm$ 3)%. This method is suitable for online optimization of individual stages in a future multistage plasma accelerator, and enables experimental studies of the relation between efficiency and transverse instability in the acceleration process.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Recovery time of a plasma-wakefield accelerator
Authors:
R. D'Arcy,
J. Chappell,
J. Beinortaite,
S. Diederichs,
G. Boyle,
B. Foster,
M. J. Garland,
P. Gonzalez Caminal,
C. A. Lindstrøm,
G. Loisch,
S. Schreiber,
S. Schröder,
R. J. Shalloo,
M. Thévenet,
S. Wesch,
M. Wing,
J. Osterhoff
Abstract:
The interaction of intense particle bunches with plasma can give rise to plasma wakes capable of sustaining gigavolt-per-metre electric fields, which are orders of magnitude higher than provided by state-of-the-art radio-frequency technology. Plasma wakefields can, therefore, strongly accelerate charged particles and offer the opportunity to reach higher particle energies with smaller and hence mo…
▽ More
The interaction of intense particle bunches with plasma can give rise to plasma wakes capable of sustaining gigavolt-per-metre electric fields, which are orders of magnitude higher than provided by state-of-the-art radio-frequency technology. Plasma wakefields can, therefore, strongly accelerate charged particles and offer the opportunity to reach higher particle energies with smaller and hence more widely available accelerator facilities. However, the luminosity and brilliance demands of high-energy physics and photon science require particle bunches to be accelerated at repetition rates of thousands or even millions per second, which are orders of magnitude higher than demonstrated with plasma-wakefield technology. Here we investigate the upper limit on repetition rates of beam-driven plasma accelerators by measuring the time it takes for the plasma to recover to its initial state after perturbation by a wakefield. The many-nanosecond-level recovery time measured establishes the in-principle attainability of megahertz rates of acceleration in plasmas. The experimental signatures of the perturbation are well described by simulations of a temporally evolving parabolic ion channel, transferring energy from the collapsing wake to the surrounding media. This result establishes that plasma-wakefield modules could be developed as feasible high-repetition-rate energy boosters at current and future particle-physics and photon-science facilities.
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Stability of ionisation-injection-based laser-plasma accelerators
Authors:
Simon Bohlen,
Jonathan C. Wood,
Theresa Brümmer,
Florian Grüner,
Carl. A. Lindstrøm,
Martin Meisel,
Theresa Staufer,
Richard D'Arcy,
Kristjan Põder,
Jens Osterhoff
Abstract:
Laser-plasma acceleration (LPA) is a compact technique to accelerate electron bunches to highly relativistic energies, making it a promising candidate to power radiation sources for industrial or medical applications. We report on the generation of electron beams from an 80 MeV-level LPA setup based on ionisation injection (II) over a duration of 8 hours at a repetition rate of 2.5 Hz, resulting i…
▽ More
Laser-plasma acceleration (LPA) is a compact technique to accelerate electron bunches to highly relativistic energies, making it a promising candidate to power radiation sources for industrial or medical applications. We report on the generation of electron beams from an 80 MeV-level LPA setup based on ionisation injection (II) over a duration of 8 hours at a repetition rate of 2.5 Hz, resulting in 72,000 consecutive shots with charge injection and acceleration. Over the full operation time the moving averages of the total beam charge of 14.5 pC and the charge between 70-80 MeV did not drift on a detectable level. The largest source of shot-to-shot jitter was in the beam charge (26% standard deviation), which was most strongly correlated with fluctuations in the plasma density (3.6% standard deviation). Particle-in-cell simulations demonstrate that this was chiefly caused by stronger laser self-focusing in higher density plasmas, which significantly increased the ionised charge along with the emittance of the beam. The nonlinearity of this process imposes tight constraints on the reproducibility of the laser-plasma conditions required for a low jitter II-LPA output if self-focusing plays a role in the laser evolution.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
A comparison of spectral reconstruction methods applied to non-zero temperature NRQCD meson correlation functions
Authors:
Thomas Spriggs,
Gert Aarts,
Chris Allton,
Timothy Burns,
Rachel Horohan D'Arcy,
Benjamin Jäger,
Seyong Kim,
Maria-Paola Lombardo,
Sam Offler,
Ben Page,
Sinead M. Ryan,
Jon-Ivar Skullerud
Abstract:
We present results from the fastsum collaboration's programme to determine the spectrum of the bottomonium system as a function of temperature. Three different methods of extracting spectral information are discussed: a Maximum Likelihood approach using a Gaussian spectral function for the ground state, the Backus Gilbert method, and the Kernel Ridge Regression machine learning procedure. We emplo…
▽ More
We present results from the fastsum collaboration's programme to determine the spectrum of the bottomonium system as a function of temperature. Three different methods of extracting spectral information are discussed: a Maximum Likelihood approach using a Gaussian spectral function for the ground state, the Backus Gilbert method, and the Kernel Ridge Regression machine learning procedure. We employ the fastsum anisotropic lattices with 2+1 dynamical quark flavours, with temperatures ranging from 47 to 375 MeV.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Progress of the FLASHForward X-2 high-beam-quality, high-efficiency plasma-accelerator experiment
Authors:
C. A. Lindstrøm,
J. Beinortaite,
J. Björklund Svensson,
L. Boulton,
J. Chappell,
J. M. Garland,
P. Gonzalez,
G. Loisch,
F. Peña,
L. Schaper,
B. Schmidt,
S. Schröder,
S. Wesch,
J. Wood,
J. Osterhoff,
R. D'Arcy
Abstract:
FLASHForward is an experimental facility at DESY dedicated to beam-driven plasma-accelerator research. The X-2 experiment aims to demonstrate acceleration with simultaneous beam-quality preservation and high energy efficiency in a compact plasma stage. We report on the completed commissioning, first experimental results, ongoing research topics, as well as plans for future upgrades.
FLASHForward is an experimental facility at DESY dedicated to beam-driven plasma-accelerator research. The X-2 experiment aims to demonstrate acceleration with simultaneous beam-quality preservation and high energy efficiency in a compact plasma stage. We report on the completed commissioning, first experimental results, ongoing research topics, as well as plans for future upgrades.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Evolution of longitudinal plasma-density profiles in discharge capillaries for plasma wakefield accelerators
Authors:
J. M. Garland,
G. Tauscher,
S. Bohlen,
G. J. Boyle,
R. D'Arcy,
L. Goldberg,
K. Põder,
L. Schaper,
B. Schmidt,
J. Osterhoff
Abstract:
Precise characterization and tailoring of the spatial and temporal evolution of plasma density within plasma sources is critical for realizing high-quality accelerated beams in plasma wakefield accelerators. The simultaneous use of two independent diagnostic techniques allowed the temporally and spatially resolved detection of plasma density with unprecedented sensitivity and enabled the character…
▽ More
Precise characterization and tailoring of the spatial and temporal evolution of plasma density within plasma sources is critical for realizing high-quality accelerated beams in plasma wakefield accelerators. The simultaneous use of two independent diagnostic techniques allowed the temporally and spatially resolved detection of plasma density with unprecedented sensitivity and enabled the characterization of the plasma temperature at local thermodynamic equilibrium in discharge capillaries. A common-path two-color laser interferometer for obtaining the average plasma density with a sensitivity of $2\times 10^{15}$ cm$^{-2}$ was developed together with a plasma emission spectrometer for analyzing spectral line broadening profiles with a resolution of $5\times 10^{15}$ cm$^{-3}$. Both diagnostics show good agreement when applying the spectral line broadening analysis methodology of Gigosos and Carde{ñ}oso. Measured longitudinally resolved plasma density profiles exhibit a clear temporal evolution from an initial flat-top to a Gaussian-like shape in the first microseconds as material is ejected out from the capillary, deviating from the often-desired flat-top profile. For plasma with densities of 0.5-$2.5\times 10^{17}$ cm$^{-3}$, temperatures of 1-7 eV were indirectly measured. These measurements pave the way for highly detailed parameter tuning in plasma sources for particle accelerators and beam optics.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Controlled density-downramp injection in a beam-driven plasma wakefield accelerator
Authors:
Alexander Knetsch,
Bridget Sheeran,
Lewis Boulton,
Pardis Niknejadi,
Kristjan Põder,
Lucas Schaper,
Ming Zeng,
Simon Bohlen,
Gregory Boyle,
Theresa Brümmer,
James Chappell,
Richard D'Arcy,
Severin Diederichs,
Brian Foster,
Matthew James Garland,
Pau Gonzalez Caminal,
Bernhard Hidding,
Vladislav Libov,
Carl Andreas Lindstrøm,
Alberto Martinez de la Ossa,
Martin Meisel,
Trupen Parikh,
Bernhard Schmidt,
Sarah Schröder,
Gabriele Tauscher
, et al. (4 additional authors not shown)
Abstract:
This paper describes the utilization of beam-driven plasma wakefield acceleration to implement a high-quality plasma cathode via density-downramp injection in a short injector stage at the FLASHForward facility at DESY. Electron beams with charge of up to 105 pC and energy spread of a few percent were accelerated by a tunable effective accelerating field of up to 2.7 GV/m. The plasma cathode was o…
▽ More
This paper describes the utilization of beam-driven plasma wakefield acceleration to implement a high-quality plasma cathode via density-downramp injection in a short injector stage at the FLASHForward facility at DESY. Electron beams with charge of up to 105 pC and energy spread of a few percent were accelerated by a tunable effective accelerating field of up to 2.7 GV/m. The plasma cathode was operated drift-free with very high injection efficiency. Sources of jitter, the emittance and divergence of the resulting beam were investigated and modeled, as were strategies for performance improvements that would further increase the wide-ranging applications for a plasma cathode with the demonstrated operational stability
△ Less
Submitted 10 August, 2020; v1 submitted 24 July, 2020;
originally announced July 2020.
-
Tunable and precise two-bunch generation at FLASHForward
Authors:
S. Schröder,
K. Ludwig,
A. Aschikhin,
R. D'Arcy,
M. Dinter,
P. Gonzalez,
S. Karstensen,
A. Knetsch,
V. Libov,
C. A. Lindstrøm,
F. Marutzky,
P. Niknejadi,
A. Rahali,
L. Schaper,
A. Schleiermacher,
B. Schmidt,
S. Thiele,
A. de Zubiaurre Wagner,
S. Wesch,
J. Osterhoff
Abstract:
Beam-driven plasma-wakefield acceleration based on external injection has the potential to significantly reduce the size of future accelerators. Stability and quality of the acceleration process substantially depends on the incoming bunch parameters. Precise control of the current profile is essential for optimising energy-transfer efficiency and preserving energy spread. At the FLASHForward facil…
▽ More
Beam-driven plasma-wakefield acceleration based on external injection has the potential to significantly reduce the size of future accelerators. Stability and quality of the acceleration process substantially depends on the incoming bunch parameters. Precise control of the current profile is essential for optimising energy-transfer efficiency and preserving energy spread. At the FLASHForward facility, driver--witness bunch pairs of adjustable bunch length and separation are generated by a set of collimators in a dispersive section, which enables fs-level control of the longitudinal bunch profile. The design of the collimator apparatus and its commissioning is presented.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
Matching small $β$ functions using centroid jitter and two beam position monitors
Authors:
C. A. Lindstrøm,
R. D'Arcy,
M. J. Garland,
P. Gonzalez,
B. Schmidt,
S. Schröder,
S. Wesch,
J. Osterhoff
Abstract:
Matching to small beta functions is required to preserve emittance in plasma accelerators. The plasma wake provides strong focusing fields, which typically require beta functions on the mm-scale, comparable to those found in the final focusing of a linear collider. Such beams can be time consuming to experimentally produce and diagnose. We present a simple, fast, and noninvasive method to measure…
▽ More
Matching to small beta functions is required to preserve emittance in plasma accelerators. The plasma wake provides strong focusing fields, which typically require beta functions on the mm-scale, comparable to those found in the final focusing of a linear collider. Such beams can be time consuming to experimentally produce and diagnose. We present a simple, fast, and noninvasive method to measure Twiss parameters in a linac using two beam position monitors only, relying on the similarity of the beam phase space and the jitter phase space. By benchmarking against conventional quadrupole scans, the viability of this technique was experimentally demonstrated at the FLASHForward plasma-accelerator facility.
△ Less
Submitted 29 May, 2020; v1 submitted 14 February, 2020;
originally announced February 2020.
-
FLASHForward: Plasma-wakefield accelerator science for high-average-power applications
Authors:
R. D'Arcy,
A. Aschikhin,
S. Bohlen,
G. Boyle,
T. Brümmer,
J. Chappell,
S. Diederichs,
B. Foster,
M. J. Garland,
L. Goldberg,
P. Gonzalez,
S. Karstensen,
A. Knetsch,
P. Kuang,
V. Libov,
K. Ludwig,
A. Martinez de la Ossa,
F. Marutzky,
M. Meisel,
T. J. Mehrling,
P. Niknejadi,
K. Poder,
P. Pourmoussavi,
M. Quast,
J. -H. Röckemann
, et al. (11 additional authors not shown)
Abstract:
The FLASHForward experimental facility is a high-performance test-bed for precision plasma-wakefield research, aiming to accelerate high-quality electron beams to GeV-levels in a few centimetres of ionised gas. The plasma is created by ionising gas in a gas cell either by a high-voltage discharge or a high-intensity laser pulse. The electrons to be accelerated will either be injected internally fr…
▽ More
The FLASHForward experimental facility is a high-performance test-bed for precision plasma-wakefield research, aiming to accelerate high-quality electron beams to GeV-levels in a few centimetres of ionised gas. The plasma is created by ionising gas in a gas cell either by a high-voltage discharge or a high-intensity laser pulse. The electrons to be accelerated will either be injected internally from the plasma background or externally from the FLASH superconducting RF front end. In both cases the wakefield will be driven by electron beams provided by the FLASH gun and linac modules operating with a 10 Hz macro-pulse structure, generating 1.25 GeV, 1 nC electron bunches at up to 3 MHz micro-pulse repetition rates. At full capacity, this FLASH bunch-train structure corresponds to 30 kW of average power, orders of magnitude higher than drivers available to other state-of-the-art LWFA and PWFA experiments. This high-power functionality means FLASHForward is the only plasma-wakefield facility in the world with the immediate capability to develop, explore, and benchmark high-average-power plasma-wakefield research essential for next-generation facilities. The operational parameters and technical highlights of the experiment are discussed, as well as the scientific goals and high-average-power outlook.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
A tunable plasma-based energy dechirper
Authors:
R. D'Arcy,
S. Wesch,
A. Aschikhin,
S. Bohlen,
C. Behrens,
M. J. Garland,
L. Goldberg,
P. Gonzalez,
A. Knetsch,
V. Libov,
A. Martinez de la Ossa,
M. Meisel,
T. J. Mehrling,
P. Niknejadi,
K. Poder,
J. -H. Roeckemann,
L. Schaper,
B. Schmidt,
S. Schroeder,
C. Palmer,
J. -P. Schwinkendorf,
B. Sheeran,
M. J. V. Streeter,
G. Tauscher,
V. Wacker
, et al. (1 additional authors not shown)
Abstract:
A tunable plasma-based energy dechirper has been developed at FLASHForward to remove the correlated energy spread of a 681~MeV electron bunch. Through the interaction of the bunch with wakefields excited in plasma the projected energy spread was reduced from a FWHM of 1.31$\%$ to 0.33$\%$ without reducing the stability of the incoming beam. The experimental results for variable plasma density are…
▽ More
A tunable plasma-based energy dechirper has been developed at FLASHForward to remove the correlated energy spread of a 681~MeV electron bunch. Through the interaction of the bunch with wakefields excited in plasma the projected energy spread was reduced from a FWHM of 1.31$\%$ to 0.33$\%$ without reducing the stability of the incoming beam. The experimental results for variable plasma density are in good agreement with analytic predictions and three-dimensional simulations. The proof-of-principle dechir** strength of $1.8$~GeV/mm/m significantly exceeds those demonstrated for competing state-of-the-art techniques and may be key to future plasma wakefield-based free-electron lasers and high energy physics facilities, where large intrinsic chirps need to be removed.
△ Less
Submitted 4 January, 2019; v1 submitted 15 October, 2018;
originally announced October 2018.
-
PIP-II Injector Test's Low Energy Beam Transport: Commissioning and Selected Measurements
Authors:
A. Shemyakin,
M. Alvarez,
R. Andrews,
J. -P. Carneiro,
A. Chen,
R. D'Arcy,
B. Hanna,
L. Prost,
V. Scarpine,
C. Wiesner
Abstract:
The PIP2IT test accelerator is under construction at Fermilab. Its ion source and Low Energy Beam Transport (LEBT) in its initial (straight) configuration have been commissioned to full specification parameters. This paper introduces the LEBT design and summarizes the outcome of the commissioning activities.
The PIP2IT test accelerator is under construction at Fermilab. Its ion source and Low Energy Beam Transport (LEBT) in its initial (straight) configuration have been commissioned to full specification parameters. This paper introduces the LEBT design and summarizes the outcome of the commissioning activities.
△ Less
Submitted 27 April, 2017;
originally announced April 2017.
-
MuSIC: delivering the world's most intense muon beam
Authors:
S. Cook,
R. D'Arcy,
A. Edmonds,
M. Fukuda,
K. Hatanaka,
Y. Hino,
Y. Kuno,
M. Lancaster,
Y. Mori,
T. Ogitsu,
H. Sakamoto,
A. Sato,
N. H. Tran,
N. M. Truong,
M. Wing,
A. Yamamoto,
M. Yoshida
Abstract:
A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam im**ing on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-cap…
▽ More
A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam im**ing on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-capture solenoid the first $36^\circ$ of the curved muon transport line was commissioned and the muon flux was measured. In order to detect muons, a target of either copper or magnesium was placed to stop muons at the end of the muon beamline. Two stations of plastic scintillators located upstream and downstream from the muon target were used to reconstruct the decay spectrum of muons. In a complementary method to detect negatively-charged muons, the X-ray spectrum yielded by muonic atoms in the target were measured in a germanium detector. Measurements, at a proton beam current of 6 pA, yielded $(10.4 \pm 2.7) \times 10^5$ muons per Watt of proton beam power ($μ^+$ and $μ^-$), far in excess of other facilities. At full beam power (400 W), this implies a rate of muons of $(4.2 \pm 1.1) \times 10^8$ muons s$^{-1}$, amongst the highest in the world. The number of $μ^-$ measured was about a factor of 10 lower, again by far the most efficient muon beam produced. The set up is a prototype for future experiments requiring a high-intensity muon beam, such as a muon collider or neutrino factory, or the search for rare muon decays which would be a signature for phenomena beyond the Standard Model of particle physics. Such a muon beam can also be used in other branches of physics, nuclear and condensed matter, as well as other areas of scientific research.
△ Less
Submitted 25 October, 2016;
originally announced October 2016.
-
Pxie low energy beam transport commissioning
Authors:
L. Prost,
M. Alvarez,
R. Andrews,
J. -P. Carneiro,
B. Hanna,
V. Scarpine,
A. Shemyakin,
R. D'Arcy,
C. Wiesner
Abstract:
The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW-compatible, pulsed H- superconducting RF linac. To validate the concept of the front-end of such machine, a test accelerator (a.k.a. PXIE) is under construction. It includes a 10 mA DC, 30 KeV H- ion source, a 2 m-long Low Energy Beam Transport (…
▽ More
The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW-compatible, pulsed H- superconducting RF linac. To validate the concept of the front-end of such machine, a test accelerator (a.k.a. PXIE) is under construction. It includes a 10 mA DC, 30 KeV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CW RFQ, followed by a Medium Energy Beam Transport (MEBT) that feeds the first of 2 cryomodules increasing the beam energy to ~25 MeV, and a High Energy Beam Transport section (HEBT) that takes the beam to a dump. The ion source and LEBT, which includes 3 solenoids, several clearing electrodes/collimators and a chop** system, have been built, installed, and commissioned to full specification parameters. This report presents the outcome of our commissioning activities, including phase-space measurements at the end of the beam line under various neutralization schemes obtained by changing the electrodes' biases and chopper parameters.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
Calculation of the effect of slit size on emittance measurements made by a two-slit scanner
Authors:
Richard D'Arcy,
Alexander Shemyakin
Abstract:
Parallel slit-slit devices are commonly used to measure the transverse emittance of a particle beam, selecting a portion of the beam with the front slit and measuring the angular distribution with the rear. This paper calculates the effect of finite slit sizes on measured emittance and Twiss functions in the case of Gaussian spatial and angular distributions of the oncoming beam. A formula for rec…
▽ More
Parallel slit-slit devices are commonly used to measure the transverse emittance of a particle beam, selecting a portion of the beam with the front slit and measuring the angular distribution with the rear. This paper calculates the effect of finite slit sizes on measured emittance and Twiss functions in the case of Gaussian spatial and angular distributions of the oncoming beam. A formula for recovering the true emittance from the measured values is derived.
△ Less
Submitted 11 January, 2016; v1 submitted 20 March, 2015;
originally announced March 2015.
-
Status of the warm front end of PXIE
Authors:
A. Shemyakin,
M. Alvarez,
R. Andrews,
C. Baffes,
A. Chen,
B. Hanna,
L. Prost,
G. Saewert,
V. Scarpine,
J. Steimel,
D. Sun,
D. Li,
R. D'Arcy
Abstract:
A CW-compatible, pulsed H- superconducting linac is envisaged as a possible path for upgrading Fermilab's injection complex. To validate the concept of the front- end of such a machine, a test accelerator (a.k.a. PXIE) is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2m-long LEBT, a 2.1 MeV CW RFQ, and a 10-m long MEBT that is capable of creati…
▽ More
A CW-compatible, pulsed H- superconducting linac is envisaged as a possible path for upgrading Fermilab's injection complex. To validate the concept of the front- end of such a machine, a test accelerator (a.k.a. PXIE) is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2m-long LEBT, a 2.1 MeV CW RFQ, and a 10-m long MEBT that is capable of creating a large variety of bunch structures. The paper will report commissioning results of a partially assembled LEBT, status of RFQ manufacturing, and describe development of the MEBT, in particular, of elements of its chop** system.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
