-
Phase Behavior of the Patchy Colloids Confined in the Patchy Porous Media
Authors:
Yurij V. Kalyuzhnyi,
Taras Patsahan,
Myroslav Holovko,
Peter T. Cummings
Abstract:
A simple model for functionalized disordered porous media is proposed and the effects of confinement on self-association, percolation and phase behavior of a fluid of patchy particles are studied. The media is formed by a randomly distributed hard-sphere obstacles fixed in space and decorated by a certain number of off-center square-well sites. The properties of the fluid of patchy particles, repr…
▽ More
A simple model for functionalized disordered porous media is proposed and the effects of confinement on self-association, percolation and phase behavior of a fluid of patchy particles are studied. The media is formed by a randomly distributed hard-sphere obstacles fixed in space and decorated by a certain number of off-center square-well sites. The properties of the fluid of patchy particles, represented by the fluid of hard spheres each bearing a set of the off-center square-well sites, are studied using an appropriate combination of the scaled particle theory for the porous media, Wertheim's thermodynamic perturbation theory, and the Flory-Stockmayer theory. To assess the accuracy of the theory a set of computer simulations have been performed. In general, predictions of the theory appear to be in a good agreement with computer simulation results. Confinement and competition between the formation of bonds connecting the fluid particles, and connecting fluid particles and obstacles of the matrix, give rise to a re-entrant phase behavior with three critical points and two separate regions of the liquid-gas phase coexistence.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Experimental and theoretical justifications for the observed discriminations between enantiomers of prochiral alcohols by chirally blind EI-MS
Authors:
Mohamad Z. Kassaee,
Ahmad Mani-varnosfaderani,
Nastaran Abedini,
Esmaeil Eidi,
Aysan Mojtaheadi,
Mohamad H. Kassaee,
Peter T. Cummings
Abstract:
To all appearances, electron impact mass spectrometer (EI-MS) is considered a "chirally blind" instrument. Yet, numerous non-identical R (right) and S (left) configurations of prochiral alcohols' mass spectra alcohols have appeared in the literature with almost no justification. Such observations are often attributed to impurities, experimental circumstances, inaccurate measurements, etc. In an ex…
▽ More
To all appearances, electron impact mass spectrometer (EI-MS) is considered a "chirally blind" instrument. Yet, numerous non-identical R (right) and S (left) configurations of prochiral alcohols' mass spectra alcohols have appeared in the literature with almost no justification. Such observations are often attributed to impurities, experimental circumstances, inaccurate measurements, etc. In an experimental attempt to explain this phenomenon, here we have avoided the above mentioned pitfalls by conducting control experiments using different pure enantiomers under the same circumstances. Hence, we report the mass spectra of R- and S-enantiomers of 2-octanol (1R, 1S) and 1-octyn-3-ol (2R, 2S) collected by running 20 independent experiments for each R- and S-enantiomer. Statistical analyses confirmed that the peak intensities were significant to an acceptable level of confidence. The 1R and 1S enantiomers were separated reasonably in the PC space, implying that the chirally blind EI-MS is able to discriminate between R and S prochiral alcohols. Theoretically, self-complexation through H-bonding for S (or R) appears to give a new chiral center at the H-bonded oxygen atom, producing a new dimeric pair of diastereomers SRS and SSS (or RRR and RSR) before ionization, and SRS.+ and SSS.+ (or RRR.+ and RSR.+) after ionization. The results of our calculations have explicitly shown that these hydrogen bonds formed. Interestingly, the latter four ionized diastereomers appear with different structural and thermodynamic parameters at the M06-2X/6-311++g (d,p) level of theory.
△ Less
Submitted 3 November, 2023; v1 submitted 2 November, 2023;
originally announced November 2023.
-
Empty liquid state and re-entrant phase behavior of the patchy colloids confined in the porous media
Authors:
Taras Hvozd,
Yurij V. Kalyuzhnyi,
Vojko Vlachy,
Peter T. Cummings
Abstract:
Patchy colloidal model with three and four equivalent patches, confined in the attractive random porous media, undergo re-entrant gas-liquid phase separation with the possibility for the liquid phase density to approach zero. This unusual behavior is caused by an interplay between strong fluid-fluid bonding interactions and weak fluid-matrix attractions. At high temperature the shape of the phase…
▽ More
Patchy colloidal model with three and four equivalent patches, confined in the attractive random porous media, undergo re-entrant gas-liquid phase separation with the possibility for the liquid phase density to approach zero. This unusual behavior is caused by an interplay between strong fluid-fluid bonding interactions and weak fluid-matrix attractions. At high temperature the shape of the phase diagram is determined by the attractive interaction between the fluid particles; weak Yukawa attraction between fluid and obstacles only slightly enhances the fluid-fluid bonding. At low enough temperature the network of the fluid particles is formed and the shape of the phase diagram becomes defined by the Yukawa fluid-obstacle attraction. Due to this interaction a layer of mutually bonded particles around the obstacles is formed and the network becomes fluid particles in the network is defined by a spatial arrangement of the matrix particles. These features may open a new possibilities in making the equilibrium gels with the predefined nonuniform distribution of the particles.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Towards Molecular Simulations that are Transparent, Reproducible, Usable By Others, and Extensible (TRUE)
Authors:
Matthew W. Thompson,
Justin B. Gilmer,
Ray A. Matsumoto,
Co D. Quach,
Parashara Shamaprasad,
Alexander H. Yang,
Christopher R. Iacovella,
Clare McCabe,
Peter T. Cummings
Abstract:
Systems composed of soft matter (e.g., liquids, polymers, foams, gels, colloids, and most biological materials) are ubiquitous in science and engineering, but molecular simulations of such systems pose particular computational challenges, requiring time and/or ensemble-averaged data to be collected over long simulation trajectories for property evaluation. Performing a molecular simulation of a so…
▽ More
Systems composed of soft matter (e.g., liquids, polymers, foams, gels, colloids, and most biological materials) are ubiquitous in science and engineering, but molecular simulations of such systems pose particular computational challenges, requiring time and/or ensemble-averaged data to be collected over long simulation trajectories for property evaluation. Performing a molecular simulation of a soft matter system involves multiple steps, which have traditionally been performed by researchers in a "bespoke" fashion, resulting in many published soft matter simulations not being reproducible based on the information provided in the publications. To address the issue of reproducibility and to provide tools for computational screening, we have been develo** the open-source Molecular Simulation and Design Framework (MoSDeF) software suite. In this paper, we propose a set of principles to create Transparent, Reproducible, Usable by others, and Extensible (TRUE) molecular simulations. MoSDeF facilitates the publication and dissemination of TRUE simulations by automating many of the critical steps in molecular simulation, thus enhancing their reproducibility. We provide several examples of TRUE molecular simulations: All of the steps involved in creating, running and extracting properties from the simulations are distributed on open-source platforms (within MoSDeF and on GitHub), thus meeting the definition of TRUE simulations.
△ Less
Submitted 5 March, 2020; v1 submitted 4 March, 2020;
originally announced March 2020.
-
Primitive models of room temperature ionic liquids. Liquid-gas phase coexistence
Authors:
Y. V. Kalyuzhnyi,
J. Rescic,
M. Holovko,
P. T. Cummings
Abstract:
We propose several versions of primitive models of room temperature ionic liquids (RTILs) and develop a mean spherical approximation (MSA)-type theory for their description. RTIL is modeled as a two-component mixture of hard-sphere anions and flexible linear chain cations, represented by tangentially bonded hard spheres with the charge located on one of the terminal beads. The theoretical descript…
▽ More
We propose several versions of primitive models of room temperature ionic liquids (RTILs) and develop a mean spherical approximation (MSA)-type theory for their description. RTIL is modeled as a two-component mixture of hard-sphere anions and flexible linear chain cations, represented by tangentially bonded hard spheres with the charge located on one of the terminal beads. The theoretical description of the model is carried out using the solution of the appropriately modified associative MSA (AMSA). Our solution reduces to solving one nonlinear algebraic equation for the Blum's screening parameter $Γ$, which in turn is used to express all thermodynamic properties of the models of interest. We calculate liquid-gas phase diagrams using theoretical and computer simulation methods for two versions of the model, represented by the dimer ($D$) and chain ($C$) models. Theoretical predictions for the phase diagrams appear to be in reasonably good agreement with computer simulation results. It is demonstrated that the models and theory are able to qualitatively reproduce experimentally observed phase behavior of RTILs, in particular the decrease of the critical temperature and critical density with increasing asymmetry of the model in its shape and position of the charge.
△ Less
Submitted 26 January, 2019;
originally announced January 2019.
-
Formalizing Atom-ty** and the Dissemination of Force Fields with Foyer
Authors:
Christoph Klein,
Andrew Z. Summers,
Matthew W. Thompson,
Justin Gilmer,
Clare McCabe,
Peter T. Cummings,
Janos Sallai,
Christopher R. Iacovella
Abstract:
A key component to enhancing reproducibility in the molecular simulation community is reducing ambiguity in the parameterization of molecular models. Ambiguity in molecular models often stems from the dissemination of molecular force fields in a format that is not directly usable or is ambiguously documented via a non-machine readable mechanism. Specifically, the lack of a general tool for perform…
▽ More
A key component to enhancing reproducibility in the molecular simulation community is reducing ambiguity in the parameterization of molecular models. Ambiguity in molecular models often stems from the dissemination of molecular force fields in a format that is not directly usable or is ambiguously documented via a non-machine readable mechanism. Specifically, the lack of a general tool for performing automated atom-ty** under the rules of a particular force field facilitates errors in model parameterization that may go unnoticed if other researchers are unable reproduce this process. Here, we present Foyer, a Python tool that enables users to define force field atom-ty** rules in a format that is both machine- and human-readable thus eliminating ambiguity in atom-ty** and additionally providing a framework for force field dissemination. Foyer defines force fields in an XML format, where SMARTS strings are used to define the chemical context of a particular atom type. Herein we describe the underlying methodology of the Foyer package, highlighting its advantages over typical atom-ty** approaches and demonstrate is application in several use-cases.
△ Less
Submitted 7 December, 2018;
originally announced December 2018.
-
Melting upon cooling and freezing upon heating: Fluid-solid phase diagram for Svejk-Hasek model of dimerizing hard spheres
Authors:
Yurij V. Kalyuzhnyi,
Peter T. Cummings
Abstract:
A simple model of dimerizing hard spheres with highly nontrivial fluid-solid phase behaviour is proposed. The model is studied using the recently proposed resummed thermodynamic perturbation theory for central force (RTPT-CF) associating potentials. The phase diagram has the fluid branch of the fluid-solid coexistence curve located at a temperatures lower than those of the solid branch. This unusu…
▽ More
A simple model of dimerizing hard spheres with highly nontrivial fluid-solid phase behaviour is proposed. The model is studied using the recently proposed resummed thermodynamic perturbation theory for central force (RTPT-CF) associating potentials. The phase diagram has the fluid branch of the fluid-solid coexistence curve located at a temperatures lower than those of the solid branch. This unusual behaviour is related to the strong dependence of the system excluded volume on the temperature, which for the model at hand decreases with increasing temperature. This effect can be also seen for a wide family of fluid models with an effective interaction that combines short range attraction and repulsion at a larger distance. We expect that for sufficiently high repulsive barrier, such systems may show similar phase behaviour.
△ Less
Submitted 25 July, 2016;
originally announced July 2016.
-
Interfacial Ionic Liquids: Connecting Static and Dynamic Structures
Authors:
Ahmet Uysal,
Hua Zhou,
Guang Feng,
Sang Soo Lee,
Song Li,
Peter T. Cummings,
Pasquale F. Fulvio,
Sheng Dai,
John K. McDonough,
Yury Gogotsi,
Paul Fenter
Abstract:
It is well-known that room temperature ionic liquids (RTILs) often adopt a charge-separated layered structure, i.e., with alternating cation- and anion-rich layers, at electrified interfaces. However, the dynamic response of the layered structure to temporal variations in applied potential is not well understood. We used in situ, real-time X-ray reflectivity (XR) to study the potential-dependent e…
▽ More
It is well-known that room temperature ionic liquids (RTILs) often adopt a charge-separated layered structure, i.e., with alternating cation- and anion-rich layers, at electrified interfaces. However, the dynamic response of the layered structure to temporal variations in applied potential is not well understood. We used in situ, real-time X-ray reflectivity (XR) to study the potential-dependent electric double layer (EDL) structure of an imidazolium-based RTIL on charged epitaxial graphene during potential cycling as a function of temperature. The results suggest that the graphene-RTIL interfacial structure is bistable in which the EDL structure at any intermediate potential can be described by the combination of two extreme-potential structures whose proportions vary depending on the polarity and magnitude of the applied potential. This picture is supported by the EDL structures obtained by fully atomistic molecular dynamics (MD) simulations at various static potentials. The potential-driven transition between the two structures is characterized by an increasing width but with an approximately fixed hysteresis magnitude as a function of temperature. The results are consistent with the coexistence of distinct anion and cation adsorbed structures separated by an energy barrier (~0.15 eV).
△ Less
Submitted 6 December, 2014; v1 submitted 21 November, 2014;
originally announced November 2014.
-
Probing the Statistical Validity of the Ductile-to-Brittle Transition in Metallic Nanowires Using GPU Computing
Authors:
William R. French,
Amulya K. Pervaje,
Andrew P. Santos,
Christopher R. Iacovella,
Peter T. Cummings
Abstract:
We perform a large-scale statistical analysis (> 2000 independent simulations) of the elongation and rupture of gold nanowires, probing the validity and scope of the recently proposed ductile-to-brittle transition that occurs with increasing nanowire length [Wu et. al., Nano Lett., 12, 910-914 (2012)]. To facilitate a high-throughput simulation approach, we implement the second-moment approximatio…
▽ More
We perform a large-scale statistical analysis (> 2000 independent simulations) of the elongation and rupture of gold nanowires, probing the validity and scope of the recently proposed ductile-to-brittle transition that occurs with increasing nanowire length [Wu et. al., Nano Lett., 12, 910-914 (2012)]. To facilitate a high-throughput simulation approach, we implement the second-moment approximation to the tight-binding (TB-SMA) potential within HOOMD-Blue, a molecular dynamics package which runs on massively parallel graphics processing units (GPUs). In a statistical sense, we find that the nanowires obey the ductile-to-brittle model quite well; however, we observe several unexpected features from the simulations that build on our understanding of the ductile-to-brittle transition. First, occasional failure behavior is observed that qualitatively differs from that predicted by the model prediction; this is attributed to stochastic thermal motion of the Au atoms and occurs at temperatures as low as 10 K. In addition, we also find that the ductile-to-brittle model, which was developed using classical dislocation theory, holds for nanowires as small as 3 nm in diameter. Finally, we demonstrate that the nanowire critical length is higher at 298 K relative to 10 K, a result that is not predicted by the ductile-to-brittle model. These results offer practical design strategies for adjusting nanowire failure and structure, and also demonstrate that GPU computing is an excellent tool for studies requiring a large number independent trajectories in order to fully characterize a system's behavior.
△ Less
Submitted 15 November, 2013;
originally announced November 2013.
-
Atomistic Simulations of Highly Conductive Molecular Transport Junctions Under Realistic Conditions
Authors:
William R. French,
Christopher R. Iacovella,
Ivan Rungger,
Amaury Melo Souza,
Stefano Sanvito,
Peter T. Cummings
Abstract:
We report state-of-the-art atomistic simulations combined with high-fidelity conductance calculations to probe structure-conductance relationships in Au-benzenedithiolate(BDT)-Au junctions under elongation. Our results demonstrate that large increases in conductance are associated with the formation of monatomic chains (MACs) of Au atoms directly connected to BDT. An analysis of the electronic str…
▽ More
We report state-of-the-art atomistic simulations combined with high-fidelity conductance calculations to probe structure-conductance relationships in Au-benzenedithiolate(BDT)-Au junctions under elongation. Our results demonstrate that large increases in conductance are associated with the formation of monatomic chains (MACs) of Au atoms directly connected to BDT. An analysis of the electronic structure of the simulated junctions reveals that enhancement in the s-like states in Au MACs causes the increases in conductance. Other structures also result in increased conductance but are too short-lived to be detected in experiment, while MACs remain stable for long simulation times. Examinations of thermally evolved junctions with and without MACs show negligible overlap between conductance histograms, indicating that the increase in conductance is related to this unique structural change and not thermal fluctuation. These results, which provide an excellent explanation for a recently observed anomalous experimental result [Bruot et al., Nature Nanotech., 2012, 7, 35-40], should aid in the development of mechanically responsive molecular electronic devices.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
Structural Origins of Conductance Fluctuations in Gold-Thiolate Molecular Transport Junctions
Authors:
William R. French,
Christopher R. Iacovella,
Ivan Rungger,
Amaury Melo Souza,
Stefano Sanvito,
Peter T. Cummings
Abstract:
We report detailed atomistic simulations combined with high-fidelity conductance calculations to probe the structural origins of conductance fluctuations in thermally evolving Au-benzene-1,4-dithiolate-Au junctions. We compare the behavior of structurally ideal junctions (electrodes with flat surfaces) to structurally realistic, experimentally representative junctions resulting from break junction…
▽ More
We report detailed atomistic simulations combined with high-fidelity conductance calculations to probe the structural origins of conductance fluctuations in thermally evolving Au-benzene-1,4-dithiolate-Au junctions. We compare the behavior of structurally ideal junctions (electrodes with flat surfaces) to structurally realistic, experimentally representative junctions resulting from break junction simulations. The enhanced mobility of metal atoms in structurally realistic junctions results in significant changes to the magnitude and origin of the conductance fluctuations. Fluctuations are larger by a factor of 2-3 in realistic junctions compared to ideal junctions. Moreover, in junctions with highly deformed electrodes, the conductance fluctuations arise primarily from changes in the Au geometry, in contrast to results for junctions with non-deformed electrodes, where the conductance fluctuations are dominated by changes in the molecule geometry. These results provide important guidance to experimentalists develo** strategies to control molecular conductance for device applications, and also to theoreticians invoking simplified structural models of junctions to predict their behavior.
△ Less
Submitted 1 March, 2013;
originally announced March 2013.
-
Large-Scale Atomistic Simulations of Environmental Effects on the Formation and Properties of Molecular Junctions
Authors:
William R. French,
Christopher R. Iacovella,
Peter T. Cummings
Abstract:
Using an updated simulation tool, we examine molecular junctions comprised of benzene-1,4-dithiolate bonded between gold nanotips, focusing on the importance of environmental factors and inter-electrode distance on the formation and structure of bridged molecules. We investigate the complex relationship between monolayer density and tip separation, finding that the formation of multi-molecule junc…
▽ More
Using an updated simulation tool, we examine molecular junctions comprised of benzene-1,4-dithiolate bonded between gold nanotips, focusing on the importance of environmental factors and inter-electrode distance on the formation and structure of bridged molecules. We investigate the complex relationship between monolayer density and tip separation, finding that the formation of multi-molecule junctions is favored at low monolayer density, while single-molecule junctions are favored at high density. We demonstrate that tip geometry and monolayer interactions, two factors that are often neglected in simulation, affect the bonding geometry and tilt angle of bridged molecules. We further show that the structures of bridged molecules at 298 and 77 K are similar.
△ Less
Submitted 15 February, 2012;
originally announced February 2012.
-
The Role of Polytetrahedral Structures in the Elongation and Rupture of Gold Nanowires
Authors:
Christopher R. Iacovella,
William R. French,
Brandon G. Cook,
Paul R. C. Kent,
Peter T. Cummings
Abstract:
We report comprehensive high-accuracy molecular dynamics simulations using the ReaxFF forcefield to explore the structural changes that occur as Au nanowires are elongated, establishing trends as a function of both temperature and nanowire diameter. Our simulations and subsequent quantitative structural analysis reveal that polytetrahedral structures (e.g., icosahedra) form within the "amorphous"…
▽ More
We report comprehensive high-accuracy molecular dynamics simulations using the ReaxFF forcefield to explore the structural changes that occur as Au nanowires are elongated, establishing trends as a function of both temperature and nanowire diameter. Our simulations and subsequent quantitative structural analysis reveal that polytetrahedral structures (e.g., icosahedra) form within the "amorphous" neck regions, most prominently for systems with small diameter at high temperature. We demonstrate that the formation of polytetrahedra diminishes the conductance quantization as compared to systems without this structural motif. We demonstrate that use of the ReaxFF forcefield, fitted to high-accuracy first principles calculations of Au, combines the accuracy of quantum calculations with the speed of semi-empirical methods.
△ Less
Submitted 28 October, 2011;
originally announced October 2011.
-
The Influence of Molecular Adsorption on Elongating Gold Nanowires
Authors:
William R. French,
Christopher R. Iacovella,
Peter T. Cummings
Abstract:
Using molecular dynamics simulations, we study the impact of physisorbing adsorbates on the structural and mechanical evolution of gold nanowires (AuNWs) undergoing elongation. We used various adsorbate models in our simulations, with each model giving rise to a different surface coverage and mobility of the adsorbed phase. We find that the local structure and mobility of the adsorbed phase remain…
▽ More
Using molecular dynamics simulations, we study the impact of physisorbing adsorbates on the structural and mechanical evolution of gold nanowires (AuNWs) undergoing elongation. We used various adsorbate models in our simulations, with each model giving rise to a different surface coverage and mobility of the adsorbed phase. We find that the local structure and mobility of the adsorbed phase remains relatively uniform across all segments of an elongating AuNW, except for the thinning region of the wire where the high mobility of Au atoms disrupts the monolayer structure, giving rise to higher solvent mobility. We analyzed the AuNW trajectories by measuring the ductile elongation of the wires and detecting the presence of characteristic structural motifs that appeared during elongation. Our findings indicate that adsorbates facilitate the formation of high-energy structural motifs and lead to significantly higher ductile elongations. In particular, our simulations result in a large number of monatomic chains and helical structures possessing mechanical stability in excess of what we observe in vacuum. Conversely, we find that a molecular species that interacts weakly (i.e., does not adsorb) with AuNWs worsens the mechanical stability of monatomic chains.
△ Less
Submitted 31 August, 2011;
originally announced August 2011.
-
Investigation of bone resorption within a cortical basic multicellular unit using a lattice-based computational model
Authors:
P. R. Buenzli,
J. Jeon,
P. Pivonka,
D. W. Smith,
P. T. Cummings
Abstract:
In this paper we develop a lattice-based computational model focused on bone resorption by osteoclasts in a single cortical basic multicellular unit (BMU). Our model takes into account the interaction of osteoclasts with the bone matrix, the interaction of osteoclasts with each other, the generation of osteoclasts from a growing blood vessel, and the renewal of osteoclast nuclei by cell fusion. Al…
▽ More
In this paper we develop a lattice-based computational model focused on bone resorption by osteoclasts in a single cortical basic multicellular unit (BMU). Our model takes into account the interaction of osteoclasts with the bone matrix, the interaction of osteoclasts with each other, the generation of osteoclasts from a growing blood vessel, and the renewal of osteoclast nuclei by cell fusion. All these features are shown to strongly influence the geometrical properties of the develo** resorption cavity including its size, shape and progression rate, and are also shown to influence the distribution, resorption pattern and trajectories of individual osteoclasts within the BMU. We demonstrate that for certain parameter combinations, resorption cavity shapes can be recovered from the computational model that closely resemble resorption cavity shapes observed from microCT imaging of human cortical bone.
△ Less
Submitted 21 November, 2011; v1 submitted 25 May, 2011;
originally announced May 2011.
-
Liquid-gas phase behavior of polydisperse dipolar hard-sphere fluid: Extended thermodynamic perturbation theory for central force associating potential
Authors:
Yu. V. Kalyuzhnyi,
S. Hlushak,
P. T. Cummings
Abstract:
The liquid-gas phase diagram for polydisperse dipolar hard-sphere fluid with polydispersity in the hard-sphere size and dipolar moment is calculated using extension of the recently proposed thermodynamic perturbation theory for central force (TPT-CF) associating potential. To establish the connection with the phase behavior of ferrocolloidal dispersions it is assumed that the dipole moment is prop…
▽ More
The liquid-gas phase diagram for polydisperse dipolar hard-sphere fluid with polydispersity in the hard-sphere size and dipolar moment is calculated using extension of the recently proposed thermodynamic perturbation theory for central force (TPT-CF) associating potential. To establish the connection with the phase behavior of ferrocolloidal dispersions it is assumed that the dipole moment is proportional to the cube of the hard-sphere diameter. We present and discuss the full phase diagram, which includes cloud and shadow curves, binodals and distribution functions of the coexisting daughter phases at different degrees of the system polydispersity. In all cases studied polydispersity increases the region of the phase instability and shifts the critical point to the higher values of the temperature and density. The larger size particles always fractionate to the liquid phase and the smaller size particles tend to move to the gas phase. At relatively high values of the system polydispersity three-phase coexistence is observed.
△ Less
Submitted 13 July, 2012; v1 submitted 10 November, 2009;
originally announced November 2009.
-
Phase coexistance in polydisperse mixture of hard-sphere colloidal and flexible chain particles
Authors:
Y. V. Kalyuzhnyi,
P. T. Cummings
Abstract:
A theoretical scheme for the calculation of the full phase diagram (including cloud and shadow curves, binodals and distribution functions of the coexisting phases) for colloid-polymer mixtures with polymer chain length polydispersity and hard-sphere colloidal and polymeric monomer sizes polydispersity is proposed. The scheme combines thermodynamic perturbation theory for associating fluids and…
▽ More
A theoretical scheme for the calculation of the full phase diagram (including cloud and shadow curves, binodals and distribution functions of the coexisting phases) for colloid-polymer mixtures with polymer chain length polydispersity and hard-sphere colloidal and polymeric monomer sizes polydispersity is proposed. The scheme combines thermodynamic perturbation theory for associating fluids and recently developed method used to determine the phase diagram of polydisperse spherical shape colloidal fluids (L.Bellier-Castella {\it et al.}, {\it J.Chem.Phys.} {\bf 113}, 8337(2000)). By way of illustration we present and discuss the full phase diagram for the mixture with polydispersity in the size of the hard-sphere colloidal particles.
△ Less
Submitted 9 May, 2007;
originally announced May 2007.
-
Multicomponent mixture of charged hard-sphere chain molecules in the polymer mean-spherical approximation
Authors:
Yu. V. Kalyuzhnyi,
P. T. Cummings
Abstract:
The analytical solution of the recently proposed ideal chain polymer mean-spherical approximation (Yu.Kalyuzhnyi, Mol.Phys., 94, 735(1998)) is presented for the multicomponent mixture of charged hard-sphere linear chain flexible molecules. The solution apply to any mixture of chain molecules with arbitrary distribution of the charge and size of the beads along the molecular backbone. Closed form…
▽ More
The analytical solution of the recently proposed ideal chain polymer mean-spherical approximation (Yu.Kalyuzhnyi, Mol.Phys., 94, 735(1998)) is presented for the multicomponent mixture of charged hard-sphere linear chain flexible molecules. The solution apply to any mixture of chain molecules with arbitrary distribution of the charge and size of the beads along the molecular backbone. Closed form analytical expressions for the internal energy, Helmholtz free energy, chemical potentials and pressure are derived. By way of illustration thermodynamical properties of several versions of the fluid of charged chain molecules of different length, including the molecules with uniform, diblock and alternating distribution of the charge are studied. Theoretical predictions are in reasonable agreement with available computer simulation predictions. We present also the liquid-gas phase diagrams for the systems with diblock and alternating distribution of the charge.
△ Less
Submitted 1 January, 2001;
originally announced January 2001.