-
A large topographic feature on the surface of the trans-Neptunian object (307261) 2002 MS$_4$ measured from stellar occultations
Authors:
F. L. Rommel,
F. Braga-Ribas,
J. L. Ortiz,
B. Sicardy,
P. Santos-Sanz,
J. Desmars,
J. I. B. Camargo,
R. Vieira-Martins,
M. Assafin,
B. E. Morgado,
R. C. Boufleur,
G. Benedetti-Rossi,
A. R. Gomes-Júnior,
E. Fernández-Valenzuela,
B. J. Holler,
D. Souami,
R. Duffard,
G. Margoti,
M. Vara-Lubiano,
J. Lecacheux,
J. L. Plouvier,
N. Morales,
A. Maury,
J. Fabrega,
P. Ceravolo
, et al. (179 additional authors not shown)
Abstract:
This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine st…
▽ More
This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine stellar occultations by 2002 MS4 between 2019 and 2022, resulting in two single-chord events, four double-chord detections, and three events with three to up to sixty-one positive chords. Using 13 selected chords from the 8 August 2020 event, we determined the global elliptical limb of 2002 MS4. The best-fitted ellipse, combined with the object's rotational information from the literature, constrains the object's size, shape, and albedo. Additionally, we developed a new method to characterize topography features on the object's limb. The global limb has a semi-major axis of 412 $\pm$ 10 km, a semi-minor axis of 385 $\pm$ 17 km, and the position angle of the minor axis is 121 $^\circ$ $\pm$ 16$^\circ$. From this instantaneous limb, we obtained 2002 MS4's geometric albedo and the projected area-equivalent diameter. Significant deviations from the fitted ellipse in the northernmost limb are detected from multiple sites highlighting three distinct topographic features: one 11 km depth depression followed by a 25$^{+4}_{-5}$ km height elevation next to a crater-like depression with an extension of 322 $\pm$ 39 km and 45.1 $\pm$ 1.5 km deep. Our results present an object that is $\approx$138 km smaller in diameter than derived from thermal data, possibly indicating the presence of a so-far unknown satellite. However, within the error bars, the geometric albedo in the V-band agrees with the results published in the literature, even with the radiometric-derived albedo.
△ Less
Submitted 23 August, 2023; v1 submitted 15 August, 2023;
originally announced August 2023.
-
Mechanochemical synthesis of pseudobinary Ti-V hydrides and their conversion reaction with Li and Na
Authors:
Fermin Cuevas,
Barbara Laïk,
Junxian Zhang,
Mickaël Mateos,
Jean-Pierre Pereira-Ramos,
Michel Latroche
Abstract:
Lithium-ion batteries (LiBs) based on insertion electrodes reach intrinsic capacity limits. Performance improvements and cost reduction require alternative reaction mechanisms and novel battery chemistries such as conversion reactions and sodium-ion batteries (NaBs), respectively. We here study the formation of Ti1-xVxH2 hydrides (0 < x < 1) and their electrochemical properties as anodes in LiBs a…
▽ More
Lithium-ion batteries (LiBs) based on insertion electrodes reach intrinsic capacity limits. Performance improvements and cost reduction require alternative reaction mechanisms and novel battery chemistries such as conversion reactions and sodium-ion batteries (NaBs), respectively. We here study the formation of Ti1-xVxH2 hydrides (0 < x < 1) and their electrochemical properties as anodes in LiBs and NaBs half-cells. Hydrides were synthesized by mechanochemistry of the metal powders under hydrogen atmosphere (PH2~ 8 MPa). For V contents below 80 at.% (x < 0.8), single-phase pseudobinary dihydride compounds Ti1-xVxH2 are formed. They crystallize in the fluorite-type structure and are highly nanostructured (crystallite size < 10 nm). Their lattice parameter decreases linearly with the V content leading to hydride destabilization. Electrochemical studies were first carried out in Li-ion half cells with full conversion between Ti1-xVxH2 hydrides and lithium. The potential of the conversion reaction can be gradually tuned with the vanadium content due to its destabilization effect. Furthermore, different paths for the conversion reaction are observed for Ti-rich (x < 0.25) and V-rich (x > 0.7) alloys. Na-ion half-cell measurements prove the reactivity between (V,Ti)H2 hydrides and sodium, albeit with significant kinetic limitations
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
In-situ neutron diffraction during reversible deuterium loading in Ti-rich and Mn-substituted Ti(Fe,Mn)0.90 alloys
Authors:
Erika Michela Dematteis,
Jussara Barale,
Giovanni Capurso,
Stefano Deledda,
Magnus H. Sørby,
Fermin Cuevas,
Michel Latroche,
Marcello Baricco
Abstract:
Hydrogen is an efficient energy carrier that can be produced from renewable sources, enabling the transition towards CO2-free energy. Hydrogen can be stored for a long period in the solid-state, with suitable alloys. Ti-rich TiFe0.90 compound exhibits a mild activation process for the first hydrogenation, and Ti(Fe,Mn)0.90 substituted alloys can lead to the fine tuning of equilibrium pressure as a…
▽ More
Hydrogen is an efficient energy carrier that can be produced from renewable sources, enabling the transition towards CO2-free energy. Hydrogen can be stored for a long period in the solid-state, with suitable alloys. Ti-rich TiFe0.90 compound exhibits a mild activation process for the first hydrogenation, and Ti(Fe,Mn)0.90 substituted alloys can lead to the fine tuning of equilibrium pressure as a function of the final application. In this study, the crystal structure of TiFe(0.90-x)Mnx alloys (x = 0, 0.05 and 0.10) and their deuterides has been determined by in-situ neutron diffraction, while recording Pressure-Composition Isotherms at room temperature. The investigation aims at analysing the influence of Mn for Fe substitution in Ti-rich Ti(Fe,Mn)0.90 alloys on structural properties during reversible deuterium loading, which is still unsolved and seldom explored. After activation, samples have been transferred into custom-made stainless-steel and aluminium alloy cells used for in-situ neutron diffraction experiments during deuterium loading at ILL and ISIS neutron facilities, respectively. The study enables remarkable understanding on hydrogen storage, basic structural knowledge, and support to the industrial application of TiFe-type alloys for integrated hydrogen tank in energy storage systems by determining the volume expansion during deuteration. Furthermore, the study demonstrates that different contents of Mn do not significantly change the volumetric expansion during phase transitions, affecting only the deuterium content for the γ phase and the cell evolution for the \b{eta} phase. The study confirms that the deuterated structures of the γ phase upon absorption, \b{eta} and α phase upon desorption, correspond to S.G. Cmmm, P2221 and Pm-3m, respectively.
△ Less
Submitted 23 November, 2022; v1 submitted 24 August, 2022;
originally announced August 2022.
-
TiFe$_{0.85}$Mn$_{0.05}$ alloy produced at industrial level for a hydrogen storage plant
Authors:
Jussara Barale,
Erika M. Dematteis,
Giovanni Capurso,
Bettina Neuman,
Stefano Deledda,
Paola Rizzi,
Fermin Cuevas,
Marcello Baricco
Abstract:
In the use of hydrogen as large-scale energy vector, metal hydrides based on intermetallic compounds play a key role, thanks to mild temperatures and pressures required for the storage. It is increasingly necessary to develop hydrogen-based devices, and in this work, the intermetallic compound TiFe$_{0.85}$Mn$_{0.05}$ is evaluated and selected as H$_2$-carrier for a storage system of 50 kg of H…
▽ More
In the use of hydrogen as large-scale energy vector, metal hydrides based on intermetallic compounds play a key role, thanks to mild temperatures and pressures required for the storage. It is increasingly necessary to develop hydrogen-based devices, and in this work, the intermetallic compound TiFe$_{0.85}$Mn$_{0.05}$ is evaluated and selected as H$_2$-carrier for a storage system of 50 kg of H$_2$. A batch of 5 kg of alloy was synthesized at industrial level and characterized through scanning electron microscopy and powder X-ray diffraction, to determine the structure and phase abundance. Moreover, the hydrogen sorption properties were investigated through thermodynamic and kinetic analyses, followed by a long-term cycling study and resistance to O$_2$ and H$_2$O poisoning. Comparing results for alloys with same nominal composition, but prepared either under industrial or laboratory conditions, it was found that the alloy synthesis promotes discrepancies in phase abundance and microstructure and promotes the formation of a passive layer that deeply affect the hydrogen sorption properties. A scheme based on Monte Carlo simulation and structural results was developed to explain the key role of the passive layer (Ti$_3$Fe$_3$O) and of the secondary phases (Ti$_4$Fe$_2$O$_{0.4}$ and $β$-Ti$_{80}$(Fe,Mn)$_2$0) in promoting the hydrogenation of the TiFe$_{0.85}$Mn$_{0.05}$. A storage system based on this alloy can be integrated with an electrolyser upstream (25 bar) and a fuel cell downstream (1 bar) at 55 $^\circ$C, storing 1.0 H$_2$ wt.%, displaying fast kinetic, resistance to oxygen, water and nitrogen gas impurities, and stability over more than 250 cycles.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Investigation of the phase occurrence and H sorption properties in the Y33.33Ni66.67-xAlx (0 <= x <= 33.33) system
Authors:
Hao Shen,
Valerie Paul-Boncour,
Michel Latroche,
Fermin Cuevas,
** Li,
Hui** Yuan,
Zhinian Li,
Junxian Zhang,
Lijun Jiang
Abstract:
The Y33.33Ni66.67-xAlx system has been investigated in the region 0 <= x <= 33.3. The alloys were synthesized by induction melting. Phase occurrence and structural properties were studied by X-Ray powder Diffraction (XRD). The Al solubility in each phase has been investigated by XRD and Electron Probe Micro-Analysis (EPMA). The hydrogenation properties were characterized by pressure-composition is…
▽ More
The Y33.33Ni66.67-xAlx system has been investigated in the region 0 <= x <= 33.3. The alloys were synthesized by induction melting. Phase occurrence and structural properties were studied by X-Ray powder Diffraction (XRD). The Al solubility in each phase has been investigated by XRD and Electron Probe Micro-Analysis (EPMA). The hydrogenation properties were characterized by pressure-composition isotherm measurements and kinetic curves at 473 K. For x = 0, the binary Y33.33Ni66.67 alloy crystallizes in the cubic superstructure with F4-3m space group and ordered Y vacancies. For 1.67 <= x <= 8.33, the alloys contain mainly Y(Ni, Al)2 and Y(Ni, Al)3 pseudobinary phases; while for 16.67 <= x <= 33.33 they are mainly formed by ternary line compounds Y3Ni6Al2, Y2Ni2Al and YNiAl. Contrary to the binary Y33.33Ni66.67, Y(Ni, Al)2 pseudo-binary compounds crystalize in C15 phase (space group Fd-3m ) with disordered Y vacancies. The solubility limit of Al in the C15 YNi2-yAly phase is y = 0.11 (i.e., x = 3.67). The Y(Ni, Al)3 phase changes from rhombohedral (PuNi3-type, R-3m) to hexagonal (CeNi3-type, P63/mmc) structure for x increasing from 5.00 to 6.67. Upon hydrogenation, the disproportion of C15 Y(Ni, Al)2 and losses of crystallinity of YNi and Y2Ni2Al are the main reasons causing capacity decay of Y33.33Ni66.67-xAlx (0 <= x <= 33.33) alloys upon cycling.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Substitutional effects in TiFe for hydrogen storage: a comprehensive review
Authors:
Erika Michela Dematteis,
Nicola Berti,
Fermin Cuevas,
Michel Latroche,
Marcello Baricco
Abstract:
The search for suitable materials for solid-state stationary storage of green hydrogen is pushing the implementation of efficient renewable energy systems. This involves rational design and modification of cheap alloys for effective storage in mild conditions of temperature and pressure. Among many intermetallic compounds described in the literature, TiFe-based systems have recently regained vivid…
▽ More
The search for suitable materials for solid-state stationary storage of green hydrogen is pushing the implementation of efficient renewable energy systems. This involves rational design and modification of cheap alloys for effective storage in mild conditions of temperature and pressure. Among many intermetallic compounds described in the literature, TiFe-based systems have recently regained vivid interest as materials for practical applications since they are low-cost and they can be tuned to match required pressure and operation conditions. This work aims to provide a comprehensive review of publications involving chemical substitution in TiFe-based compounds for guiding compound design and materials selection in current and future hydrogen storage applications. Mono- and multi-substituted compounds modify TiFe thermodynamics and are beneficial for many hydrogenation properties. They will be reviewed and deeply discussed, with a focus on manganese substitution.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Impact of Surface Chemistry of Silicon Nanoparticles on the Structural and Electrochemical Properties of Si/Ni3.4Sn4 Com-posite Anode for Li-Ion Batteries
Authors:
Tahar Azib,
Claire Thaury,
Fermin Cuevas,
Eric Leroy,
Christian Jordy,
Nicolas Marx,
Michel Latroche
Abstract:
Embedding silicon nanoparticles in an intermetallic matrix is a promising strategy to produce remarkable bulk anode materials for lithium-ion (Li-ion) batteries with low potential, high electrochemical capacity and good cycling stability. These composite materials can be synthetized at a large scale using mechanical milling. However, for Si-Ni3Sn4 composites, milling also induces a chemical reacti…
▽ More
Embedding silicon nanoparticles in an intermetallic matrix is a promising strategy to produce remarkable bulk anode materials for lithium-ion (Li-ion) batteries with low potential, high electrochemical capacity and good cycling stability. These composite materials can be synthetized at a large scale using mechanical milling. However, for Si-Ni3Sn4 composites, milling also induces a chemical reaction between the two components leading to the formation of free Sn and NiSi2, which is detrimental to the performance of the electrode. To prevent this reaction, a modification of the surface chemistry of the silicon has been undertaken. Si nanoparticles coated with a surface layer of either carbon or oxide were used instead of pure silicon. The influence of the coating on the composition, (micro)structure and electrochemical properties of Si-Ni3Sn4 composites is studied and compared with that of pure Si. Si coating strongly reduces the reaction between Si and Ni3Sn4 during milling. Moreover, contrary to pure silicon, Si-coated composites have a plate-like mor-phology in which the surface-modified silicon particles are surrounded by a nanostructured, Ni3Sn4-based matrix leading to smooth potential profiles during electrochemical cycling. The chemical homogeneity of the matrix is more uniform for carbon-coated than for oxygen-coated silicon. As a consequence, different electrochemical behaviors are obtained depending on the surface chemistry, with better lithiation properties for the carbon-covered silicon able to deliver over 500 mAh/g for at least 400 cycles.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Fundamental hydrogen storage properties of TiFe-alloy with partial substitution of Fe by Ti and Mn
Authors:
Erika Michela Dematteis,
David Michael Dreistadt,
Giovanni Capurso,
Julian Jepsen,
Fermin Cuevas,
Michel Latroche
Abstract:
TiFe intermetallic compound has been extensively studied, owing to its low cost, good volumetric hydrogen density, and easy tailoring of hydrogenation thermodynamics by elemental substitution. All these positive aspects make this material promising for large-scale applications of solid-state hydrogen storage. On the other hand, activation and kinetic issues should be amended and the role of elemen…
▽ More
TiFe intermetallic compound has been extensively studied, owing to its low cost, good volumetric hydrogen density, and easy tailoring of hydrogenation thermodynamics by elemental substitution. All these positive aspects make this material promising for large-scale applications of solid-state hydrogen storage. On the other hand, activation and kinetic issues should be amended and the role of elemental substitution should be further understood. This work investigates the thermodynamic changes induced by the variation of Ti content along the homogeneity range of the TiFe phase (Ti:Fe ratio from 1:1 to 1:0.9) and of the substitution of Mn for Fe between 0 and 5 at.%. In all considered alloys, the major phase is TiFe-type together with minor amounts of TiFe2 or \b{eta}-Ti-type and Ti4Fe2O-type at the Ti-poor and rich side of the TiFe phase domain, respectively. Thermodynamic data agree with the available literature but offer here a comprehensive picture of hydrogenation properties over an extended Ti and Mn compositional range. Moreover, it is demonstrated that Ti-rich alloys display enhanced storage capacities, as long as a limited amount of \b{eta}-Ti is formed. Both Mn and Ti substitutions increase the cell parameter by possibly substituting Fe, lowering the plateau pressures and decreasing the hysteresis of the isotherms. A full picture of the dependence of hydrogen storage properties as a function of the composition will be discussed, together with some observed correlations.
△ Less
Submitted 21 April, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Ni-Sn intermetallics as efficient buffering matrix of Si anodes in Li-ion batteries
Authors:
Tahar Azib,
Nicolas Bibent,
Michel Latroche,
Florent Fischer,
Jean-Claude Jumas,
Josette Olivier-Fourcade,
Christian Jordy,
Pierre-Emmanuel Lippens,
Fermin Cuevas
Abstract:
For a successful integration of silicon in high-capacity anodes of Li-ion batteries, its intrinsic capacity decay on cycling due to severe volume swelling should be minimized. In this work, Ni-Sn intermetallics are studied as buffering matrix during reversible lithiation of Si-based anodes. Si/Ni-Sn composites have been synthetized by mechanical milling using C and Al as process control agents. Ni…
▽ More
For a successful integration of silicon in high-capacity anodes of Li-ion batteries, its intrinsic capacity decay on cycling due to severe volume swelling should be minimized. In this work, Ni-Sn intermetallics are studied as buffering matrix during reversible lithiation of Si-based anodes. Si/Ni-Sn composites have been synthetized by mechanical milling using C and Al as process control agents. Ni3Sn4, Ni3Sn2 intermetallics and their bi-phasic mixture were used as constituents of the buffering matrix. The structure, composition and morphology of the composites have been analyzed by X-ray diffraction (XRD), 119Sn Transmission Mössbauer Spectroscopy (TMS) and scanning electron microscopy (SEM). They consist of ~ 150 nm Si nanoparticles embedded in a multi-phase matrix, the nanostructuration of which improves on increasing the Ni3Sn4 amount. The electrochemical properties of the composites were analyzed by galvanostatic cycling in half-cells. Best results for practical applications are found for the bi-phasic matrix Ni3Sn4-Ni3Sn2 in which Ni3Sn4 is electrochemically active while Ni3Sn2 is inactive. Low capacity loss, 0.04 %/cycle, and high coulombic efficiency, 99.6%, were obtained over 200 cycles while maintaining a high reversible capacity above 500 mAh/g at moderate regime C/5
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Metal (boro-) hydrides for high energy density storage and relevant emerging technologies
Authors:
L. J. Bannenberg,
M. Heere,
H. Benzidi,
J. Montero,
E. M. Dematteis,
S. Suwarno,
T. Jaroń,
M. Winny,
P. A. Orłowski,
W. Wegner,
A. Starobrat,
K. J. Fijałkowski,
W. Grochala,
Z. Qian,
J. -P. Bonnet,
I. Nuta,
W. Lohstroh,
C. Zlotea,
O. Mounkachi,
F. Cuevas,
C. Chatillon,
M. Latroche,
M. Fichtner,
M. Baricco,
B. C. Hauback
, et al. (1 additional authors not shown)
Abstract:
The current energy transition imposes a rapid implementation of energy storage systems with high energy density and eminent regeneration and cycling efficiency. Metal hydrides are potential candidates for generalized energy storage, when coupled with fuel cell units and/or batteries. An overview of ongoing research is reported and discussed in this review work on the light of application as hydrog…
▽ More
The current energy transition imposes a rapid implementation of energy storage systems with high energy density and eminent regeneration and cycling efficiency. Metal hydrides are potential candidates for generalized energy storage, when coupled with fuel cell units and/or batteries. An overview of ongoing research is reported and discussed in this review work on the light of application as hydrogen and heat storage matrices, as well as thin films for hydrogen optical sensors. These include a selection of single-metal hydrides, Ti-V(Fe) based intermetallics, multi-principal element alloys (high-entropy alloys), and a series of novel synthetically accessible metal borohydrides. Metal hydride materials can be as well of important usefulness for MH-based electrodes with high capacity (e.g. MgH2 ~ 2000 mAh g-1) and solid-state electrolytes displaying high ionic conductivity suitable, respectively, for Li-ion and Li/Mg battery technologies. To boost further research and development directions some characterization techniques dedicated to the study of M-H interactions, their equilibrium reactions, and additional quantification of hydrogen concentration in thin film and bulk hydrides are presented at the end of this manuscript.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Solid-state Li-ion batteries operating at room temperature using new borohydride argyrodite electrolytes
Authors:
Anh Ha Dao,
Pedro López-Aranguren,
Junxian Zhang,
Fermín Cuevas,
Michel Latroche
Abstract:
Using a new class of (BH4)- substituted argyrodite Li6PS5Z0.83(BH4)0.17, (Z = Cl, I) solid electrolyte, Li-metal solid-state batteries operating at room temperature have been developed. The cells were made by combining the modified argyrodite with an In-Li anode and two types of cathode: an oxide, LixMO2 (M = 1/3Ni, 1/3Mn, 1/3Co; so called NMC) and a titanium disulfide, TiS2. The performance of th…
▽ More
Using a new class of (BH4)- substituted argyrodite Li6PS5Z0.83(BH4)0.17, (Z = Cl, I) solid electrolyte, Li-metal solid-state batteries operating at room temperature have been developed. The cells were made by combining the modified argyrodite with an In-Li anode and two types of cathode: an oxide, LixMO2 (M = 1/3Ni, 1/3Mn, 1/3Co; so called NMC) and a titanium disulfide, TiS2. The performance of the cells was evaluated through galvanostatic cycling and Alternating Current AC electrochemical impedance measurements. Reversible capacities were observed for both cathodes for at least tens of cycles. However, the high-voltage oxide cathode cell shows lower reversible capacity and larger fading upon cycling than the sulfide one. The AC impedance measurements revealed an increasing interfacial resistance at the cathode side for the oxide cathode inducing the capacity fading. This resistance was attributed to the intrinsic poor conductivity of NMC and interfacial reactions between the oxide material and the argyrodite electrolyte. On the contrary, the low interfacial resistance of the TiS2 cell during cycling evidences a better chemical compatibility between this active material and substituted argyrodites, allowing full cycling of the cathode material, 240 mAhg-1, for at least 35 cycles with a coulombic efficiency above 97%.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Experimental behaviour of a three-stage metal hydride hydrogen compressor
Authors:
A. R. Galvis,
F. Leardini,
J. R. Ares,
F. Cuevas,
J. F. Fernandez
Abstract:
A three-stage metal hydride hydrogen compressor (MHHC) system based in AB2-type alloys has been set-up. Every stage can be considered as a Sieverts-type apparatus. The MHHC system can work in the pressure and temperature ranges comprised from vacuum to 250 bar and from RT to 200C, respectively. An efficient thermal management system was set up for the operational ranges of temperature designed. It…
▽ More
A three-stage metal hydride hydrogen compressor (MHHC) system based in AB2-type alloys has been set-up. Every stage can be considered as a Sieverts-type apparatus. The MHHC system can work in the pressure and temperature ranges comprised from vacuum to 250 bar and from RT to 200C, respectively. An efficient thermal management system was set up for the operational ranges of temperature designed. It dumps temperature shifts due to hydrogen expansion during stage coupling and hydrogen absorption/desorption in the alloys. Each reactor consists of a single and thin stainless-steel tube to maximize heat transfer. They are filled with similar amount of AB2 alloy. The MHHC system was able to produce a compression ratio (CR) as high as of 84.7 for inlet and outlet hydrogen pressures of 1.44 and 122 bar for a temperature span of 23 to 120C.
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Role of silicon and carbon on the structural and electrochemical properties of Si-Ni$_{3.4}$Sn$_4$-Al-C anodes for Li-ion batteries
Authors:
Tahar Azib,
Claire Thaury,
Cécile Fariaut-Georges,
Thierry Hézèque,
Fermin Cuevas,
Christian Jordy,
Michel Latroche
Abstract:
Varying the amounts of silicon and carbon, different composites have been prepared by ball milling of Si, Ni$_{3.4}$Sn$_4$, Al and C. Silicon and carbon contents are varied from 10 to 30 wt.% Si, and 0 to 20 wt.% C. The microstructural and electrochemical properties of the composites have been investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrochemical galvanost…
▽ More
Varying the amounts of silicon and carbon, different composites have been prepared by ball milling of Si, Ni$_{3.4}$Sn$_4$, Al and C. Silicon and carbon contents are varied from 10 to 30 wt.% Si, and 0 to 20 wt.% C. The microstructural and electrochemical properties of the composites have been investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrochemical galvanostatic cycling up to 1000 cycles. Impact of silicon and carbon contents on the phase occurrence, electrochemical capacity and cycle-life are compared and discussed. For C-content comprised between 9 and 13 wt.% and Si-content >= 20 wt.%, Si nanoparticles are embedded in a Ni$_{3.4}$Sn$_4$-Al-C matrix which is chemically homogeneous at the micrometric scale. For other carbon contents and low Si-amount (10 wt.%), no homogeneous matrix is formed around Si nanoparticles. When homogenous matrix is formed, both Ni$_3$Sn$_4$ and Si participate to the reversible lithiation mechanism, whereas no reaction between Ni$_3$Sn$_4$ and Li is observed for no homogenous matrix. Moreover, best cycle-life performances are obtained when Si nanoparticles are embedded in a homogenous matrix and Si-content is moderate (<= 20 wt.%). Composites with carbon in the 9-13 wt.% range and 20 wt.% silicon lead to the best balance between capacity and life duration upon cycling. This work experimentally demonstrates that embedding Si in an intermetallic/carbon matrix allows to efficiently accommodate Si volume changes on cycling to ensure long cycle-life.
△ Less
Submitted 20 May, 2020;
originally announced June 2020.
-
Pseudo-ternary LiBH4-LiCl-P2S5 system as structurally disordered bulk electrolyte for all-solid-state lithium batteries
Authors:
Abdelouahab El Kharbachi,
Julia Wind,
Amund Ruud,
Astrid B. Høgset,
Magnus M. Nygård,
Junxian Zhang,
Magnus H. Sørby,
Sangryun Kim,
Fermin Cuevas,
Shin-ichi Orimo,
fMaximilian Fichtner,
Michel Latroche,
Helmer Fjellvåg,
Bjørn C. Hauback
Abstract:
The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is 10-3 Scm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. S…
▽ More
The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is 10-3 Scm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH4 groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li+/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS2, theo. capacity 239 mAh g-1) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density 12 mA g-1 (0.05C-rate) at 501C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Exploits, advances and challenges benefiting beyond Li-ion battery technologies
Authors:
A. El Kharbachi,
O. Zavorotynska,
M. Latroche,
F. Cuevas,
V. Yartys,
M. Fichtner
Abstract:
The battery market is undergoing quick expansion owing to the urgent demand for mobile devices, electric vehicles and energy storage systems, convoying the current energy transition. Beyond Li-ion batteries are of high importance to follow these multiple-speed changes and adapt to the specificity of each application. This review-study will address some of the relevant post-Li ion issues and batter…
▽ More
The battery market is undergoing quick expansion owing to the urgent demand for mobile devices, electric vehicles and energy storage systems, convoying the current energy transition. Beyond Li-ion batteries are of high importance to follow these multiple-speed changes and adapt to the specificity of each application. This review-study will address some of the relevant post-Li ion issues and battery technologies, including Na-ion batteries, Mg batteries, Ca-ion batteries, Zn-ion batteries, Al-ion batteries and anionic (F- and Cl-) shuttle batteries. MH-based batteries are also presented with emphasize on NiMH batteries, and novel MH-accommodated Li-ion batteries. Finally, to facilitate further research and development some future research trends and directions are discussed based on comparison of the different battery systems with respect to Li-ion battery assumptions. Remarkably, aqueous systems are most likely to be given reconsideration for intensive, cost-effective and safer production of batteries; for instance to be utilized in (quasi)-stationary energy storage applications.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Materials for hydrogen-based energy storage: Past, recent progress and future outlook
Authors:
Volodymyr A. Yartys,
Marcello Baricco,
Jose Bellosta von Colbe,
Didier Blanchard,
Robert C. Bowman Jr.,
Darren P. Broom,
Craig E. Buckley,
Fei Chang,
** Chen,
Young Whan Cho,
Jean-Claude Crivello,
Fermin Cuevas,
William I. F. David,
Petra E. de Jongh,
Roman V. Denys,
Martin Dornheim,
Michael Felderhoff,
Yaroslav Filinchuk,
George E. Froudakis,
David M. Grant,
Bjørn C. Hauback,
Ladislav Havela,
Teng He,
Michael Hirscher,
Terry D. Humphries
, et al. (23 additional authors not shown)
Abstract:
Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The Magnesium group of international experts contributing to IEA Task 32 Hydrogen Based Energy Storage recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article…
▽ More
Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The Magnesium group of international experts contributing to IEA Task 32 Hydrogen Based Energy Storage recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article not only overviews the latest activities on both fundamental aspects of Mg-based hydrides and their applications, but also presents a historic overview on the topic and outlines projected future developments. Particular attention is paid to the theoretical and experimental studies of Mg-H system at extreme pressures, kinetics and thermodynamics of the systems based on MgH2,nanostructuring, new Mg-based compounds and novel composites, and catalysis in the Mg based H storage systems. Finally, thermal energy storage and upscaled H storage systems accommodating MgH2 are presented.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Hydrogen storage properties of Mn and Cu for Fe substitution in TiFe0.9 intermetallic compound
Authors:
Erika Michela Dematteis,
Fermin Cuevas,
Michel Latroche
Abstract:
The present study investigates the partial substitutions of Mn and Cu for Fe in the TiFe-system to gain better understanding of the role of elemental substitution on its hydrogen storage properties. The TiFe0.88-xMn0.02Cux (x = 0, 0.02, 0.04) compositions were studied. From X-Ray Diffraction (XRD) and Electron Probe Micro-Analysis (EPMA), it was found that all alloys are multi-phase, with TiFe as…
▽ More
The present study investigates the partial substitutions of Mn and Cu for Fe in the TiFe-system to gain better understanding of the role of elemental substitution on its hydrogen storage properties. The TiFe0.88-xMn0.02Cux (x = 0, 0.02, 0.04) compositions were studied. From X-Ray Diffraction (XRD) and Electron Probe Micro-Analysis (EPMA), it was found that all alloys are multi-phase, with TiFe as a major phase, together with \b{eta}-Ti and Ti4Fe2O-type as secondary precipitates, of all them containing also Mn and Cu. Increasing the Cu content augments the secondary phase amounts. Low quantity of secondary phases helps the activation of the main TiFe phase for the first hydrogen absorption, but on increasing their amounts, harsher activation occurs. Both Mn and Cu substitutions increase the cell parameter of TiFe, thus decreasing the first plateau pressure. However, Cu substitution rises the second plateau pressure revealing the predominancy of electronic effects associated to this substitution. All samples have fast kinetics and high hydrogen capacity making these substituted compounds promising for large scale stationary applications.
△ Less
Submitted 26 October, 2020; v1 submitted 10 April, 2020;
originally announced April 2020.
-
Fast and exact simulation of isotropic Gaussian random fields on $\mathbb{S}^{2}$ and $\mathbb{S}^{2}\times \mathbb{R}$
Authors:
Francisco Cuevas,
Emilio Porcu,
Denis Allard
Abstract:
We provide a method for fast and exact simulation of Gaussian random fields on spheres having isotropic covariance functions. The method proposed is then extended to Gaussian random fields defined over spheres cross time and having covariance functions that depend on geodesic distance in space and on temporal separation. The crux of the method is in the use of block circulant matrices obtained wor…
▽ More
We provide a method for fast and exact simulation of Gaussian random fields on spheres having isotropic covariance functions. The method proposed is then extended to Gaussian random fields defined over spheres cross time and having covariance functions that depend on geodesic distance in space and on temporal separation. The crux of the method is in the use of block circulant matrices obtained working on regular grids defined over longitude $\times$ latitude.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
SpatialPack: Computing the Association Between Two Spatial Processes
Authors:
Felipe Osorio,
Ronny Vallejos,
Francisco Cuevas
Abstract:
An R package SpatialPack that implements routines to compute point estimators and perform hypothesis testing of the spatial association between two stochastic sequences is introduced. These methods address the spatial association between two processes that have been observed over the same spatial locations. We briefly review the methodologies for which the routines are developed. The core routines…
▽ More
An R package SpatialPack that implements routines to compute point estimators and perform hypothesis testing of the spatial association between two stochastic sequences is introduced. These methods address the spatial association between two processes that have been observed over the same spatial locations. We briefly review the methodologies for which the routines are developed. The core routines have been implemented in C and linked to R to ensure a reasonable computational speed. Three examples are presented to illustrate the use of the package with both simulated and real data. The particular case of computing the association between two time series is also considered. Besides elementary plots and outputs we also provide a plot to visualize the spatial correlation in all directions using a new graphical tool called codispersion map. The potential extensions of SpatialPack are also discussed.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
