-
Quantitative Assessment of Finite-element Models for Magnetostatic Field Calculations
Authors:
J. A. Crittenden
Abstract:
We present quantitative means for assessing the numerical accuracy of static magnetic field calculations in finite-element models. Our calculations use the three-dimensional Opera simulation software suite of Dassault Syst`emes. Our need to assess the effects of fringe fields requires such a 3D algorithm. While we do discuss and compare our approach to a method of accuracy estimation used in the O…
▽ More
We present quantitative means for assessing the numerical accuracy of static magnetic field calculations in finite-element models. Our calculations use the three-dimensional Opera simulation software suite of Dassault Syst`emes. Our need to assess the effects of fringe fields requires such a 3D algorithm. While we do discuss and compare our approach to a method of accuracy estimation used in the Opera post-processor, our methods are generally applicable to any model using relaxation techniques in finite-element systems. For purposes of illustration, we present modeling and analysis of two types of quadrupole electromagnets presently in operation in the south arc of the Cornell Electron Storage Ring (CESR). Calculations of field multipole expansion coefficients and numerical deviations from Maxwell's equations in source-free regions are discussed, with emphasis on the dependence of their accuracy on changes to the finite-element model. Successive refinement steps in the finite-element model for the non-extraction type of CESR south arc quadrupole achieve a reduction in the RMS value of the longitudinal component of the curl vector on the magnet axis by a factor of nearly 70 from $4.38 \times 10^{-2}$ T/m to $6.36 \times 10^{-4}$ T/m, which is 0.0021% of the field gradient. An accuracy of 2.9% is achieved for a dodecapole coefficient of $2.4 \times 10^{-4}$ of that of the quadrupole in the longitudinal integral of the vertical field gradient at a radius of 1 cm.
△ Less
Submitted 1 June, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Measurement of the Per Cavity Energy Recovery Efficiency in the Single Turn CBETA Configuration
Authors:
C. Gulliford,
N. Banerjee,
A. Bartnik,
J. Crittenden,
K. Deitrick,
G. H. Hoffstaetter,
P. Quigley,
K. Smolenski,
J. S. Berg,
R. Michnoff,
S. Peggs,
D. Trbojevic
Abstract:
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficienc…
▽ More
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficiency of 99.4%, with per cavity power balances ranging from 99.2-99.8%, was measured. When accounting for small particle losses occurring in the path length adjustment sections of the return loop, this corresponds to per cavity single particle energy recovery efficiencies ranging from 99.8 to 100.5%. A maximum current of 70 microamps was energy recovered, limited by radiation shielding of the beam stop in its preliminary installation.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Beam Commissioning Results from the CBETA Fractional Arc Test
Authors:
C. Gulliford,
N. Banerjee,
A. Bartnik,
J. S. Berg,
J. Crittenden,
J. Dobbins,
R. Hulsart,
J. Jones,
D. J. Kelliher,
B. Kuske,
W. Lou,
M. McAteer,
R. Michnoff,
S. Peggs,
P. Quigley,
D. Sagan,
K. Smolenski,
V. Vesherevich,
D. Widger,
G. H. Hoffstaetter,
D. Trbojevic
Abstract:
This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) r…
▽ More
This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) return loop featuring first production Halbach style permanent magnets. Achieving these tasks required characterization of the injection beam, calibration and phasing of the main linac cavities, demonstration of the required 36 MeV energy gain, and measurement of the splitter line horizontal dispersion and R56 at the nominal 42 MeV. In addition, a procedure for determining the BPM offsets, as well as the tune per cell in the FFA section via scanning the linac energy and inducing betatron oscillations around the periodic orbit in the fractional arc was developed and tested. A detailed comparison of these measurements to simulation is discussed.
△ Less
Submitted 11 February, 2019; v1 submitted 8 February, 2019;
originally announced February 2019.
-
Measurement and modeling of electron-cloud-induced betatron tune shifts at the Cornell Electron-positron Storage Ring test accelerator
Authors:
Stephen Poprocki,
Sean Buechele,
James Crittenden,
Keefer Rowan,
David Rubin,
John San Soucie
Abstract:
We report on extensive measurements at the Cornell Electron-positron Storage Ring of electron-cloud-induced betatron tune shifts for trains of positron bunches at 2.1 and 5.3 GeV with bunch populations ranging between 0.64x10^10 and 9.6x10^10. Measurements using a witness bunch with variable distance from the end of the train and variable bunch population provide information on cloud decay and clo…
▽ More
We report on extensive measurements at the Cornell Electron-positron Storage Ring of electron-cloud-induced betatron tune shifts for trains of positron bunches at 2.1 and 5.3 GeV with bunch populations ranging between 0.64x10^10 and 9.6x10^10. Measurements using a witness bunch with variable distance from the end of the train and variable bunch population provide information on cloud decay and cloud pinching during the bunch passage. We employ Monte Carlo simulations of the reflection and absorption of synchrotron radiation photons to determine the pattern of absorption sites around the circumference of the storage ring. The Geant4 simulation toolkit is used to model the interactions of the photons with the beampipe wall and determine the production energy and location distributions of the photoelectrons which seed the electron cloud. An electron cloud buildup model based on fitted ring-averaged secondary-yield properties of the vacuum chamber predicts tune shifts in good agreement with the measurements.
△ Less
Submitted 5 August, 2019; v1 submitted 30 December, 2018;
originally announced December 2018.
-
CBETA Design Report, Cornell-BNL ERL Test Accelerator
Authors:
G. H. Hoffstaetter,
D. Trbojevic,
C. Mayes,
N. Banerjee,
J. Barley,
I. Bazarov,
A. Bartnik,
J. S. Berg,
S. Brooks,
D. Burke,
J. Crittenden,
L. Cultrera,
J. Dobbins,
D. Douglas,
B. Dunham,
R. Eichhorn,
S. Full,
F. Furuta,
C. Franck,
R. Gallagher,
M. Ge,
C. Gulliford,
B. Heltsley,
D. Jusic,
R. Kaplan
, et al. (29 additional authors not shown)
Abstract:
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec…
▽ More
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Shielded button electrodes for time-resolved measurements of electron cloud buildup
Authors:
James A. Crittenden,
Michael G. Billing,
Yulin Li,
Mark A. Palmer,
John P. Sikora
Abstract:
We report on the design, deployment and signal analysis for shielded button electrodes sensitive to electron cloud buildup at the Cornell Electron Storage Ring. These simple detectors, derived from a beam-position monitor electrode design, have provided detailed information on the physical processes underlying the local production and lifetime of electron densities in the storage ring. Digitizing…
▽ More
We report on the design, deployment and signal analysis for shielded button electrodes sensitive to electron cloud buildup at the Cornell Electron Storage Ring. These simple detectors, derived from a beam-position monitor electrode design, have provided detailed information on the physical processes underlying the local production and lifetime of electron densities in the storage ring. Digitizing oscilloscopes are used to record electron fluxes incident on the vacuum chamber wall in 1024 time steps of 100 ps or more. The fine time steps provide a detailed characterization of the cloud, allowing the independent estimation of processes contributing on differing time scales and providing sensitivity to the characteristic kinetic energies of the electrons making up the cloud. By varying the spacing and population of electron and positron beam bunches, we map the time development of the various cloud production and re-absorption processes. The excellent reproducibility of the measurements also permits the measurement of long-term conditioning of vacuum chamber surfaces.
△ Less
Submitted 24 March, 2014; v1 submitted 27 November, 2013;
originally announced November 2013.
-
Investigation into electron cloud effects in the International Linear Collider positron dam** ring
Authors:
James A. Crittenden,
Joe Conway,
Gerald F. Dugan,
Mark A. Palmer,
David L. Rubin,
James Shanks,
Kiran G. Sonnad,
Laura Boon,
Katherine Harkay,
Takuya Ishibashi,
Miguel A. Furman,
Susanna Guiducci,
Mauro T. F. Pivi,
Lanfa Wang
Abstract:
We report modeling results for electron cloud buildup and instability in the International Linear Collider positron dam** ring. Updated optics, wiggler magnets, and vacuum chamber designs have recently been developed for the 5 GeV, 3.2-km racetrack layout. An analysis of the synchrotron radiation profile around the ring has been performed, including the effects of diffuse and specular photon sca…
▽ More
We report modeling results for electron cloud buildup and instability in the International Linear Collider positron dam** ring. Updated optics, wiggler magnets, and vacuum chamber designs have recently been developed for the 5 GeV, 3.2-km racetrack layout. An analysis of the synchrotron radiation profile around the ring has been performed, including the effects of diffuse and specular photon scattering on the interior surfaces of the vacuum chamber. The results provide input to the cloud buildup simulations for the various magnetic field regions of the ring. The modeled cloud densities thus obtained are used in the instability threshold calculations. We conclude that the mitigation techniques employed in this model will suffice to allow operation of the dam** ring at the design operational specifications.
△ Less
Submitted 24 March, 2014; v1 submitted 12 November, 2013;
originally announced November 2013.
-
Observations and predictions at CesrTA, and outlook for ILC
Authors:
G. Dugan,
M. Billing,
K. Butler,
J. Chu,
J. Crittenden,
M. Forster,
D. Kreinick,
R. Meller,
M. Palmer,
G. Ramirez,
M. Rendina,
N. Rider,
K. Sonnad,
H. Williams,
R. Campbell,
R. Holtzapple,
M. Randazzo,
J. Flanagan,
K. Ohmi,
M. Furman,
M. Venturini,
M. Pivi
Abstract:
In this paper, we will describe some of the recent experimental measurements [1, 2, 3] performed at CESRTA [4], and the supporting simulations, which probe the interaction of the electron cloud with the stored beam. These experiments have been done over a wide range of beam energies, emittances, bunch currents, and fill patterns, to gather sufficient information to be able to fully characterize th…
▽ More
In this paper, we will describe some of the recent experimental measurements [1, 2, 3] performed at CESRTA [4], and the supporting simulations, which probe the interaction of the electron cloud with the stored beam. These experiments have been done over a wide range of beam energies, emittances, bunch currents, and fill patterns, to gather sufficient information to be able to fully characterize the beam-electron-cloud interaction and validate the simulation programs. The range of beam conditions is chosen to be as close as possible to those of the ILC dam** ring, so that the validated simulation programs can be used to predict the performance of these rings with regard to electroncloud- related phenomena. Using the new simulation code Synrad3D to simulate the synchrotron radiation environment, a vacuum chamber design has been developed for the ILC dam** ring which achieves the required level of photoelectron suppression. To determine the expected electron cloud density in the ring, EC buildup simulations have been done based on the simulated radiation environment and on the expected performance of the ILC dam** ring chamber mitigation prescriptions. The expected density has been compared with analytical estimates of the instability threshold, to verify that the ILC dam** ring vacuum chamber design is adequate to suppress the electron cloud single-bunch head-tail instability.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
Measurement of Electron Trap** in the CESR Storage Ring
Authors:
M. G. Billing,
J. Conway,
E. E. Cowan,
J. A. Crittenden,
W. Hartung,
J. Lanzoni,
Y. Li,
C. S. Shill,
J. P. Sikora,
K. G. Sonnad
Abstract:
The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the stability of operation at high beam current. We have obtained measurements of long-lived electron clouds trapped in the field of a quadrupole magnet in a positr…
▽ More
The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the stability of operation at high beam current. We have obtained measurements of long-lived electron clouds trapped in the field of a quadrupole magnet in a positron storage ring, with lifetimes much longer than the revolution period. Based on modeling, we estimate that about 7% of the electrons in the cloud generated by a 20-bunch train of 5.3 GeV positrons with 16-ns spacing and $1.3x10^{11}$ population survive longer than 2.3 $μ$s in a quadrupole field of gradient 7.4 T/m. We have observed a non-monotonic dependence of the trap** effect on the bunch spacing. The effect of a witness bunch on the measured signal provides direct evidence for the existence of trapped electrons. The witness bunch is also observed to clear the cloud, demonstrating its effectiveness as a mitigation technique.
△ Less
Submitted 6 March, 2015; v1 submitted 10 September, 2013;
originally announced September 2013.
-
Electron Cloud Buildup Characterization Using Shielded Pickup Measurements and Custom Modeling Code at CESRTA
Authors:
James A. Crittenden,
John P. Sikora
Abstract:
The Cornell Electron Storage Ring Test Accelerator experimental program includes investigations into electron cloud buildup, applying various mitigation techniques in custom vacuum chambers. Among these are two 1.1-m-long sections located symmetrically in the east and west arc regions. These chambers are equipped with pickup detectors shielded against the direct beam-induced signal. They detect cl…
▽ More
The Cornell Electron Storage Ring Test Accelerator experimental program includes investigations into electron cloud buildup, applying various mitigation techniques in custom vacuum chambers. Among these are two 1.1-m-long sections located symmetrically in the east and west arc regions. These chambers are equipped with pickup detectors shielded against the direct beam-induced signal. They detect cloud electrons migrating through an 18-mm-diameter pattern of small holes in the top of the chamber. A digitizing oscilloscope is used to record the signals, providing time-resolved information on cloud development. Carbon-coated, TiN-coated and uncoated aluminum chambers have been tested. Electron and positron beams of 2.1, 4.0 and 5.3 GeV with a variety of bunch populations and spacings in steps of 4 and 14 ns have been used. Here we report on results from the ECLOUD modeling code which highlight the sensitivity of these measurements to the physical phenomena determining cloud buildup such as the photoelectron production azimuthal and energy distributions, and the secondary yield parameters including the true secondary, re-diffused, and elastic yield values.
△ Less
Submitted 15 July, 2013;
originally announced July 2013.
-
Experimental Results on the Diffractive Production of Light Vector Mesons at HERA
Authors:
J. A. Crittenden,
H1 Collaboration,
ZEUS Collaboration
Abstract:
We discuss results on the diffractive production of the vector mesons rho, phi and omega reported by the H1 and ZEUS collaborations at HERA. Unique to such studies is the experimental accessibility to the polarization of the vector mesons and hence to the spin-density matrix elements arising in vacuum-exchange processes. We emphasize the relation between the observed dependence on momentum trans…
▽ More
We discuss results on the diffractive production of the vector mesons rho, phi and omega reported by the H1 and ZEUS collaborations at HERA. Unique to such studies is the experimental accessibility to the polarization of the vector mesons and hence to the spin-density matrix elements arising in vacuum-exchange processes. We emphasize the relation between the observed dependence on momentum transfer and the polarization state of the vector meson. The diffractive nature of the production mechanism is investigated via extraction of the Pomeron trajectory at high Q^2. Flavor symmetry is observed in the phi/rho ratios in the same region of momentum transfer where the power-law scaling becomes similar. The multivariable helicity analyses impose stringent constraints on models for the vacuum-exchange production mechanism. Semi-exclusive photoproduction of transverse rho and phi mesons at momentum transfers far exceeding their mass scale exhibit a hard scaling behavior which appears to violate the QCD helicity selection rules in a two-gluon exchange model.
△ Less
Submitted 18 October, 2001;
originally announced October 2001.
-
Diffractive Production of Neutral Vector Mesons at THERA
Authors:
J. A. Crittenden
Abstract:
We consider the contribution to our understanding of vacuum-exchange processes to be made by investigations at the proposed electron-proton collider THERA. Recent results have highlighted the value of such studies for testing quantum chromodynamical descriptions of both long-range and short-range strong interactions. Stringent quantitative constraints have been provided by exploiting the opportu…
▽ More
We consider the contribution to our understanding of vacuum-exchange processes to be made by investigations at the proposed electron-proton collider THERA. Recent results have highlighted the value of such studies for testing quantum chromodynamical descriptions of both long-range and short-range strong interactions. Stringent quantitative constraints have been provided by exploiting the opportunity to correlate scaling behaviour with helicity selection in exclusive and semi-exclusive vector-meson production. After reviewing the progress achieved by the measurement programs presently being carried out by the H1 and ZEUS collaborations at HERA, we discuss the performance criteria imposed by such investigations on the THERA accelerator complex and on the detector design. We conclude that the study of vector-meson production will form an essential component of the THERA physics program beginning with the early turn-on stage of the machine and continuing throughout the achievement of its full high-luminosity potential.
△ Less
Submitted 28 June, 2001;
originally announced June 2001.
-
Measurements of Diffractive Vector-Meson Photoproduction at High Momentum Transfer from the ZEUS Experiment at HERA
Authors:
J. A. Crittenden
Abstract:
We discuss recent preliminary results on the diffractive photoproduction of {\rhoz}, $φ$, and {\jpsi} mesons at high momentum transfer reported by the ZEUS collaboration at HERA. A special-purpose calorimeter served to tag the quasi-real photons ($\qsq<0.01 \gevsq$) in the process $γ+ p \to {\rm VM}+ Y$, where $Y$ represents a dissociated state of the proton. The resulting range in photon-proton…
▽ More
We discuss recent preliminary results on the diffractive photoproduction of {\rhoz}, $φ$, and {\jpsi} mesons at high momentum transfer reported by the ZEUS collaboration at HERA. A special-purpose calorimeter served to tag the quasi-real photons ($\qsq<0.01 \gevsq$) in the process $γ+ p \to {\rm VM}+ Y$, where $Y$ represents a dissociated state of the proton. The resulting range in photon-proton center-of-mass energy extends from 80 to 120 \gev. The differential cross sections $\frac{\Dσ}{\D t}$ were obtained in the region ${\abst}>1.2 \gevsq$, where $t$ denotes the squared momentum transfer to the proton. The measurements provide good sensitivity to the observed power-law dependence $\frac{\Dσ}{\D t} \propto {(-t)}^{-n}$. Over the region in momentum transfer covered by the data, the power is found to be approximately $n\simeq 3$ for {\rhoz} and $φ$ photoproduction, and approximately $n\simeq 2$ for {\jpsi} photoproduction.
△ Less
Submitted 3 November, 2000; v1 submitted 31 October, 2000;
originally announced October 2000.
-
Topical Results on Vector-Meson Production from the HERA Collider Experiments
Authors:
J. A. Crittenden
Abstract:
The HERA collider experiments H1 and ZEUS have established extensive measurement programs for diffractive vector-meson production processes during the first six years of their operation. The results provide stringent phenomenological tests of quantum chromodynamical descriptions of hard diffraction. We discuss recent topical results on Upsilon photoproduction, on decay-angle analyses of rho^0, p…
▽ More
The HERA collider experiments H1 and ZEUS have established extensive measurement programs for diffractive vector-meson production processes during the first six years of their operation. The results provide stringent phenomenological tests of quantum chromodynamical descriptions of hard diffraction. We discuss recent topical results on Upsilon photoproduction, on decay-angle analyses of rho^0, phi and J/psi electroproduction and on rho^0 and phi photoproduction at high momentum transfer.
△ Less
Submitted 1 November, 1999;
originally announced October 1999.
-
Results on Diffractive Processes from the HERA Collider Experiments
Authors:
J. A. Crittenden
Abstract:
We review topical results on diffractive processes from the experiments H1 and ZEUS at the HERA electron-proton collider. Emphasis is placed on the phenomenological and experimental consequences of the discoveries at HERA for the proposed electron/polarized-ion collider EPIC.
We review topical results on diffractive processes from the experiments H1 and ZEUS at the HERA electron-proton collider. Emphasis is placed on the phenomenological and experimental consequences of the discoveries at HERA for the proposed electron/polarized-ion collider EPIC.
△ Less
Submitted 8 August, 1999;
originally announced August 1999.
-
Recent Results from Decay-Angle Analyses of rho^0 Photoproduction at High Momentum Transfer from ZEUS
Authors:
J. A. Crittenden
Abstract:
Recent results from decay-angle analyses of rho^0 photoproduction are presented and discussed in the context of earlier measurements at lower energy and lower momentum transfer.
Recent results from decay-angle analyses of rho^0 photoproduction are presented and discussed in the context of earlier measurements at lower energy and lower momentum transfer.
△ Less
Submitted 22 June, 1999; v1 submitted 3 June, 1999;
originally announced June 1999.
-
Scale Issues in High-Energy Diffractive Vector-Meson Production
Authors:
J. A. Crittenden
Abstract:
Recent measurements of diffractive vector-meson production with the general-purpose detectors H1 and ZEUS in electron-proton interactions with 300 GeV center-of-mass energy at the HERA accelerator complex have stimulated great interest in the question of whether perturbative QCD (pQCD) can provide an accurate description of such diffractive processes. The high flux of quasi-real photons from the…
▽ More
Recent measurements of diffractive vector-meson production with the general-purpose detectors H1 and ZEUS in electron-proton interactions with 300 GeV center-of-mass energy at the HERA accelerator complex have stimulated great interest in the question of whether perturbative QCD (pQCD) can provide an accurate description of such diffractive processes. The high flux of quasi-real photons from the 27.5 GeV electron beam has allowed high-statistics studies of vector-meson photoproduction to be compared to the deeply inelastic processes at high photon virtuality Q^2 >> Λ^2_QCD. Special-purpose electron detectors at small scattering angle have been used to identify a transition region, 0.2 < Q^2 < 2 GeV^2, where the pQCD prediction for the dominance of point-like configurations of qqbar-pairs is verified. Data samples characterized by high momentum transfer to the 820 GeV initial-state proton, 1 < |t| < 13 GeV^2, have now become available, and the results lend support to the proposition that pQCD calculations should accurately describe the inelastic vector-meson production processes in high-|t| photoproduction. Measurements of the energy dependence and the t-dependence of the elastic cross sections for rho, omega, phi, and J/psi production have provided tests of the proposal that the mass (or size) of the vector meson provides a third scaling variable for studying the transition to the domain of pQCD applicability. A preliminary result on elastic upsilon production has also been announced by the ZEUS collaboration. These issues of scale will be discussed in the context of topical phenomenological models, comparing the HERA results and those from fixed-target experiments at lower energy to the wealth of calculations available in the contemporary literature.
△ Less
Submitted 19 June, 1998;
originally announced June 1998.
-
Recent Results from Investigations of Diffractive Vector Meson Production with the ZEUS Detector at HERA
Authors:
J. A. Crittenden
Abstract:
We present results from recent investigations of diffractive vector meson production using the ZEUS detector at HERA. These consist of measurements of rho production in the region of photon virtuality 0.25 < Q^2 < 0.85 GeV^2, of rho, phi, and J/psi production for values of the momentum transfer to the proton 0.3 < |t| < 4.0 GeV^2, and of elastic J/psi production both in photoproduction and for Q…
▽ More
We present results from recent investigations of diffractive vector meson production using the ZEUS detector at HERA. These consist of measurements of rho production in the region of photon virtuality 0.25 < Q^2 < 0.85 GeV^2, of rho, phi, and J/psi production for values of the momentum transfer to the proton 0.3 < |t| < 4.0 GeV^2, and of elastic J/psi production both in photoproduction and for Q^2 > 2 GeV^2.
△ Less
Submitted 29 September, 1997;
originally announced September 1997.
-
Exclusive Production of Neutral Vector Mesons at the Electron-Proton Collider HERA
Authors:
J. A. Crittenden
Abstract:
The first five years of operation of the multi-purpose experiments ZEUS and H1 at the electron-proton storage ring facility HERA have opened a new era in the study of vector-meson production in high-energy photon-proton interactions. The high center-of-mass energy available at this unique accelerator complex allows investigations in hitherto unexplored kinematic regions, providing answers to lon…
▽ More
The first five years of operation of the multi-purpose experiments ZEUS and H1 at the electron-proton storage ring facility HERA have opened a new era in the study of vector-meson production in high-energy photon-proton interactions. The high center-of-mass energy available at this unique accelerator complex allows investigations in hitherto unexplored kinematic regions, providing answers to long-standing questions concerning the energy-dependence of the rho, omega, phi, and J/psi production cross sections. The excellent angular acceptance of these detectors, combined with that of specialized tagging detectors at small production angles, has permitted measurements of elastic and inelastic production processes for both quasi-real photons and those of virtuality exceeding the squared mass of the vector meson. This report provides a quantitative picture of the present status of these studies, comparing them to the extensive measurements in this field at lower energies and summarizing topical developments in theoretical work motivated by the new data.
△ Less
Submitted 17 September, 1997; v1 submitted 17 April, 1997;
originally announced April 1997.