Showing 1–21 of 21 results for author: Crespo, H

Preliminary results of the Single Event Effect testing for the ULTRASAT sensors

Authors: Vlad Dumitru Berlea, Arooj Asif, Merlin F. Barschke, David Berge, Juan Maria Haces Crespo, Gianluca Giavitto, Shashank Kumar, Andrea Porelli, Nicola de Simone, Jason Watson, Steven Worm, Francesco Zappon, Adi Birman, Shay Alfassi, Amos Feningstein, Eli Waxman, Udi Netzer, Tuvia Liran, Ofer Lapid, Viktor M. Algranatti, Yossi Schvartzvald

Abstract: ULTRASAT (ULtra-violet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform a deep time-resolved all-sky survey in the near-ultraviolet (NUV) spectrum. The science objectives are the detection of counterparts to short-lived transient astronomical events such as gravitational wave sources and supernovae. The mission is led by the Weizmann Institute of Science and is plan… ▽ More ULTRASAT (ULtra-violet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform a deep time-resolved all-sky survey in the near-ultraviolet (NUV) spectrum. The science objectives are the detection of counterparts to short-lived transient astronomical events such as gravitational wave sources and supernovae. The mission is led by the Weizmann Institute of Science and is planned for launch in 2026 in collaboration with the Israeli Space Agency and NASA. DESY will provide the UV camera, composed by the detector assembly located in the telescope focal plane and the remote electronics unit. The camera is composed out of four back-metallized CMOS Image Sensors (CIS) manufactured in the 4T, dual gain Tower process. As part of the radiation qualification of the camera, Single Event Effect (SEE) testing has been performed by irradiating the sensor with heavy ions at the RADEF, Jyvaskyla facility. Preliminary results of both Single Event Upset (SEU) and Single Event Latch-up (SEL) occurrence rate in the sensor are presented. Additionally, an in-orbit SEE rate simulation has been performed in order to gain preliminary knowledge about the expected effect of SEE on the mission. △ Less

Submitted 4 July, 2024; originally announced July 2024.

The scientific payload of the Ultraviolet Transient Astronomy Satellite (ULTRASAT)

Authors: Sagi Ben-Ami, Yossi Shvartzvald, Eli Waxman, Udi Netzer, Yoram Yaniv, Viktor M. Algranatti, Avishay Gal-Yam, Ofer Lapid, Eran Ofek, Jeremy Topaz, Iair Arcavi, Arooj Asif, Shlomi Azaria, Eran Bahalul, Merlin F. Barschke, Benjamin Bastian-Querner, David Berge, Vlad D. Berlea, Rolf Buhler, Louise Dittmar, Anatoly Gelman, Gianluca Giavitto, Or Guttman, Juan M. Haces Crespo, Daniel Heilbrunn , et al. (23 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is a space-borne near UV telescope with an unprecedented large field of view (200 sq. deg.). The mission, led by the Weizmann Institute of Science and the Israel Space Agency in collaboration with DESY (Helmholtz association, Germany) and NASA (USA), is fully funded and expected to be launched to a geostationary transfer orbit in Q2/3 of 202… ▽ More The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is a space-borne near UV telescope with an unprecedented large field of view (200 sq. deg.). The mission, led by the Weizmann Institute of Science and the Israel Space Agency in collaboration with DESY (Helmholtz association, Germany) and NASA (USA), is fully funded and expected to be launched to a geostationary transfer orbit in Q2/3 of 2025. With a grasp 300 times larger than GALEX, the most sensitive UV satellite to date, ULTRASAT will revolutionize our understanding of the hot transient universe, as well as of flaring galactic sources. We describe the mission payload, the optical design and the choice of materials allowing us to achieve a point spread function of ~10arcsec across the FoV, and the detector assembly. We detail the mitigation techniques implemented to suppress out-of-band flux and reduce stray light, detector properties including measured quantum efficiency of scout (prototype) detectors, and expected performance (limiting magnitude) for various objects. △ Less

Submitted 11 March, 2023; v1 submitted 30 July, 2022; originally announced August 2022.

Comments: Presented in the SPIE Astronomical Telescopes + Instrumentation 2022

Ultrafast laser pulse characterization by THG d-scan using optically enhanced graphene coatings

Authors: Tiago Gomes, Miguel Canhota, Bohdan Kulyk, Alexandre Carvalho, Bruno Jarrais, António José Fernandes, Cristina Freire, Florinda Costa, Helder Crespo

Abstract: We have successfully functionalized 5 layers of TCVD-grown graphene by photoassisted transfer hydrogenation reaction with formic acid, in order to increase its nonlinear optical response and laser-induced damage resilience. Using the functionalized graphene samples, we were able to fully characterize sub-10 fs ultrashort laser pulses using THG dispersion-scan, with results that are in excellent ag… ▽ More We have successfully functionalized 5 layers of TCVD-grown graphene by photoassisted transfer hydrogenation reaction with formic acid, in order to increase its nonlinear optical response and laser-induced damage resilience. Using the functionalized graphene samples, we were able to fully characterize sub-10 fs ultrashort laser pulses using THG dispersion-scan, with results that are in excellent agreement with the ones obtained with pristine graphene samples. △ Less

Submitted 3 June, 2022; originally announced June 2022.

LEAF: Navigating Concept Drift in Cellular Networks

Authors: Shinan Liu, Francesco Bronzino, Paul Schmitt, Arjun Nitin Bhagoji, Nick Feamster, Hector Garcia Crespo, Timothy Coyle, Brian Ward

Abstract: Operational networks commonly rely on machine learning models for many tasks, including detecting anomalies, inferring application performance, and forecasting demand. Yet, model accuracy can degrade due to concept drift, whereby the relationship between the features and the target to be predicted changes. Mitigating concept drift is an essential part of operationalizing machine learning models in… ▽ More Operational networks commonly rely on machine learning models for many tasks, including detecting anomalies, inferring application performance, and forecasting demand. Yet, model accuracy can degrade due to concept drift, whereby the relationship between the features and the target to be predicted changes. Mitigating concept drift is an essential part of operationalizing machine learning models in general, but is of particular importance in networking's highly dynamic deployment environments. In this paper, we first characterize concept drift in a large cellular network for a major metropolitan area in the United States. We find that concept drift occurs across many important key performance indicators (KPIs), independently of the model, training set size, and time interval -- thus necessitating practical approaches to detect, explain, and mitigate it. We then show that frequent model retraining with newly available data is not sufficient to mitigate concept drift, and can even degrade model accuracy further. Finally, we develop a new methodology for concept drift mitigation, Local Error Approximation of Features (LEAF). LEAF works by detecting drift; explaining the features and time intervals that contribute the most to drift; and mitigates it using forgetting and over-sampling. We evaluate LEAF against industry-standard mitigation approaches (notably, periodic retraining) with more than four years of cellular KPI data. Our initial tests with a major cellular provider in the US show that LEAF consistently outperforms periodic and triggered retraining on complex, real-world data while reducing costly retraining operations. △ Less

Submitted 2 February, 2023; v1 submitted 7 September, 2021; originally announced September 2021.

Journal ref: Proc. ACM Netw., Vol. 1, No. CoNEXT2, Article 7. Publication date: September 2023

Sensor characterization for the ULTRASAT space telescope

Authors: Benjamin Bastian-Querner, Nirmal Kaipachery, Daniel Küsters, Julian Schliwinski, Shay Alfassi, Arooj Asif, Merlin F. Barschke, Sagi Ben-Ami, David Berge, Adi Birman, Rolf Bühler, Nicola De Simone, Amos Fenigstein, Avishay Gal-Yam, Gianluca Giavitto, Juan M. Haces Crespo, Dmitri Ivanov, Omer Katz, Marek Kowalski, Shrinivasrao R. Kulkarni, Ofer Lapid, Tuvia Liran, Ehud Netzer, Eran O. Ofek, Sebastian Philipp , et al. (9 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitatio… ▽ More The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitational wave sources and supernovae. The launch to geostationary orbit is planned for 2024. The telescope with a field-of-view of $\approx200$deg$^2$, is optimized to work in the near-ultraviolet band between $220$ and $280$nm. The focal plane array is composed of four $22.4$-megapixel, backside-illuminated CMOS sensors with a total active area of 90x90mm$^2$. Prior to sensor production, smaller test sensors have been tested to support critical design decisions for the final flight sensor. These test sensors share the design of epitaxial layer and anti-reflective coatings (ARC) with the flight sensors. Here, we present a characterization of these test sensors. Dark current and read noise are characterized as a function of the device temperature. A temperature-independent noise level is attributed to on-die infrared emission and the read-out electronics` self-heating. We utilize a high-precision photometric calibration setup to obtain the test sensors` quantum efficiency (QE) relative to PTB/NIST-calibrated transfer standards ($220$-$1100$nm), the quantum yield for $λ< 300$nm, the non-linearity of the system, and the conversion gain. The uncertainties are discussed in the context of the newest results on the setup`s performance parameters. From three ARC options, Tstd, T1 and T2, the latter optimizes out-of-band rejection and peaks in the mid of the ULTRASAT operational waveband (max. QE $\approx80\%$ at $245\mathrm{nm}$). We recommend ARC option T2 for the final ULTRASAT UV sensor. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Design of the ULTRASAT UV camera

Authors: Arooj Asif, Merlin Barschke, Benjamin Bastian-Querner, David Berge, Rolf Bühler, Nicola De Simone, Gianluca Giavitto, Juan M. Haces Crespo, Nirmal Kaipachery, Marek Kowalski, Shrinivasrao R. Kulkarni, Daniel Küsters, Sebastian Philipp, Heike Prokoph, Julian Schliwinski, Mikhail Vasilev, Jason J. Watson, Steven Worm, Francesco Zappon, Shay Alfassi, Sagi Ben-Ami, Adi Birman, Kasey Boggs, Greg Bredthauer, Amos Fenigstein , et al. (12 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of th… ▽ More The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of the telescope. The camera's total sensitive area of ~90mm x 90mm is built up by four back-side illuminated CMOS sensors, which image a field of view of ~200 deg2. Each sensor has 22.4 megapixels. The Schmidt design of the telescope locates the detector inside the optical path, limiting the overall size of the assembly. As a result, the readout electronics is located in a remote unit outside the telescope. The short focal length of the telescope requires an accurate positioning of the sensors within +-50 mu along the optical axis, with a flatness of +-10 mu. While the telescope will be at around 295K during operations, the sensors are required to be cooled to 200K for dark current reduction. At the same time, the ability to heat the sensors to 343K is required for decontamination. In this paper, we present the preliminary design of the UV sensitive ULTRASAT camera. △ Less

Submitted 3 August, 2021; originally announced August 2021.

Comments: "UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XXII", Proc. SPIE 11821, Optics and Photonics, 11821-21 (August, 2021). Contact authors Rolf Buehler ([email protected]) and Merlin Barschke ([email protected])

Temporal characterization of broadband femtosecond laser pulses by third-harmonic dispersion scan with ptychographic retrieval

Authors: Tiago Gomes, Miguel Canhota, Helder Crespo

Abstract: We present a new variant of dispersion scan (d-scan) based on surface third-harmonic generation (STHG) and a ptychographic algorithm taylored for full retrieval (amplitude and phase) of broadband laser pulses. We demonstrate the technique by temporally measuring and compressing few-cycle pulses with 7 fs and 2.5 nJ from a Ti:Sapphire oscillator, using a sapphire window as the nonlinear medium. The… ▽ More We present a new variant of dispersion scan (d-scan) based on surface third-harmonic generation (STHG) and a ptychographic algorithm taylored for full retrieval (amplitude and phase) of broadband laser pulses. We demonstrate the technique by temporally measuring and compressing few-cycle pulses with 7 fs and 2.5 nJ from a Ti:Sapphire oscillator, using a sapphire window as the nonlinear medium. The results are in very good agreement with standard second-harmonic d-scan measurements based on a nonlinear crystal. The intrinsically broadband and phase-matching-independent nature of STHG make this technique very suitable for the characterization of ultrashort laser pulses over a broad wavelength range extending into the mid-infrared. △ Less

Submitted 23 March, 2021; originally announced March 2021.

Comments: 7 pages, 5 figures. Submitted to Optics Letters

Characterizing ultrashort laser pulses with second harmonic dispersion scans

Authors: Ivan Sytcevich, Chen Guo, Sara Mikaelsson, Jan Vogelsang, Anne-Lise Viotti, Benjamín Alonso, Rosa Romero, Paulo T. Guerreiro, Anne L'Huillier, Helder Crespo, Miguel Miranda, Cord L. Arnold

Abstract: The dispersion scan (d-scan) technique has emerged as a simple-to-implement characterization method for ultrashort laser pulses. D-scan traces are intuitive to interpret and retrieval algorithms that are both fast and robust have been developed to obtain the spectral phase and the temporal pulse profile. Here, we give a review of the d-scan technique based on second harmonic generation. We describ… ▽ More The dispersion scan (d-scan) technique has emerged as a simple-to-implement characterization method for ultrashort laser pulses. D-scan traces are intuitive to interpret and retrieval algorithms that are both fast and robust have been developed to obtain the spectral phase and the temporal pulse profile. Here, we give a review of the d-scan technique based on second harmonic generation. We describe and compare recent implementations for the characterization of few- and multi-cycle pulses as well as two different approaches for recording d-scan traces in single-shot, thus showing the versatility of the technique. △ Less

Submitted 19 August, 2020; originally announced August 2020.

Comments: 16 pages, 7 figures

Single-shot d-scan technique for ultrashort laser pulse characterization using transverse second-harmonic generation in random nonlinear crystals

Authors: Francisco J. Salgado-Remacha, Benjamín Alonso, Helder Crespo, Crina Cojocaru, Jose Trull, Rosa Romero, Miguel López-Ripa, Paulo T. Guerreiro, Francisco Silva, Miguel Miranda, Anne L'Huillier, Cord L. Arnold, Íñigo J. Sola

Abstract: We demonstrate a novel dispersion-scan (d-scan) scheme for single-shot temporal characterization of ultrashort laser pulses. The novelty of this method relies on the use of a highly dispersive crystal featuring antiparallel nonlinear domains with a random distribution and size. This crystal, capable of generating a transverse second-harmonic signal, acts simultaneously as the dispersive element an… ▽ More We demonstrate a novel dispersion-scan (d-scan) scheme for single-shot temporal characterization of ultrashort laser pulses. The novelty of this method relies on the use of a highly dispersive crystal featuring antiparallel nonlinear domains with a random distribution and size. This crystal, capable of generating a transverse second-harmonic signal, acts simultaneously as the dispersive element and the nonlinear medium of the d-scan device. The resulting in-line architecture makes the technique very simple and robust, allowing the acquisition of single-shot d-scan traces in real time. In addition, the technique can be further simplified by avoiding the need of dispersion pre-compensation. The retrieved pulses are in very good agreement with independent FROG measurements. We also apply the new single-shot d-scan to a TW-class laser equipped with a programmable pulse shaper, obtaining an excellent agreement between the applied and the d-scan retrieved dispersions. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: 7 pages, 5 figures

Journal ref: Opt. Lett. 45(14), 3925-3928 (2020)

Compression of CEP-stable multi-mJ laser pulses down to 4 fs in long hollow fibers

Authors: Frederik Bohle, Martin Kretschmar, Aurelie Jullien, Mate Kovacs, Miguel Miranda, Rosa Romero, Helder Crespo, Uwe Morgner, Peter Simon, Rodrigo Lopez-Martens, Tamas Nagy

Abstract: Carrier envelope phase stable 4 fs near-IR pulses with 3 mJ energy were generated by spectral broadening of circularly polarized 8 mJ pulses in a differentially pumped 2 m long composite stretched exible hollow ber. The pulses were characterized using both second-harmonic generation frequency-resolved optical gating (SHG-FROG) and SHG d-scan methods Carrier envelope phase stable 4 fs near-IR pulses with 3 mJ energy were generated by spectral broadening of circularly polarized 8 mJ pulses in a differentially pumped 2 m long composite stretched exible hollow ber. The pulses were characterized using both second-harmonic generation frequency-resolved optical gating (SHG-FROG) and SHG d-scan methods △ Less

Submitted 2 February, 2018; originally announced February 2018.

Journal ref: Laser Phys. Lett. 11 (2014) 095401 (6pp)

Self-calibrating d-scan: measuring ultrashort laser pulses on-target using an arbitrary pulse compressor

Authors: Benjamin Alonso, Iñigo J. Sola, Helder Crespo

Abstract: In most applications of ultrashort pulse lasers, temporal compressors are used to achieve a desired pulse duration in a target or sample, and precise temporal characterization is important. The dispersion-scan (d-scan) pulse characterization technique usually involves using glass wedges to impart variable, well-defined amounts of dispersion to the pulses, while measuring the spectrum of a nonlinea… ▽ More In most applications of ultrashort pulse lasers, temporal compressors are used to achieve a desired pulse duration in a target or sample, and precise temporal characterization is important. The dispersion-scan (d-scan) pulse characterization technique usually involves using glass wedges to impart variable, well-defined amounts of dispersion to the pulses, while measuring the spectrum of a nonlinear signal produced by those pulses. This works very well for broadband few-cycle pulses, but longer, narrower bandwidth pulses are much more difficult to measure this way. Here we demonstrate the concept of self-calibrating d-scan, which extends the applicability of the d-scan technique to pulses of arbitrary duration, enabling their complete measurement without prior knowledge of the introduced dispersion. In particular, we show that the pulse compressors already employed in chirped pulse amplification (CPA) systems can be used to simultaneously compress and measure the temporal profile of the output pulses on-target in a simple way, without the need of additional diagnostics or calibrations, while at the same time calibrating the often-unknown differential dispersion of the compressor itself. We demonstrate the technique through simulations and experiments under known conditions. Finally, we apply it to the measurement and compression of 27.5 fs pulses from a CPA laser. △ Less

Submitted 6 February, 2018; v1 submitted 11 September, 2017; originally announced September 2017.

Comments: 11 pages, 5 figures, Scientific Reports, in press

Journal ref: Scientific Reports 8, 3264 (2018)

Universal route to optimal few- to single-cycle pulse generation in hollow-core fiber compressors

Authors: Enrique Conejero Jarque, Julio San Roman, Francisco Silva, Rosa Romero, Warein Holgado, Miguel Angel Gonzalez-Galicia, Benjamin Alonso, Iñigo Sola, Helder Crespo

Abstract: Gas-filled hollow-core fiber (HCF) pulse post-compressors generating few- to single-cycle pulses are a key enabling tool for attosecond science and ultrafast spectroscopy. Achieving optimum performance in this regime can be extremely challenging due to the ultra-broad bandwidth of the pulses and the need of an adequate temporal diagnostic. These difficulties have hindered the full exploitation of… ▽ More Gas-filled hollow-core fiber (HCF) pulse post-compressors generating few- to single-cycle pulses are a key enabling tool for attosecond science and ultrafast spectroscopy. Achieving optimum performance in this regime can be extremely challenging due to the ultra-broad bandwidth of the pulses and the need of an adequate temporal diagnostic. These difficulties have hindered the full exploitation of HCF post-compressors, namely the generation of stable and high-quality near-Fourier-transform-limited pulses. Here we show that, independently of conditions such as the type of gas or the laser system used, there is a universal route to obtain the shortest stable output pulse down to the single-cycle regime. Numerical simulations and experimental measurements performed with the dispersion-scan technique reveal that, in quite general conditions, post-compressed pulses exhibit a residual third-order dispersion intrinsic to optimum nonlinear propagation within the fiber, in agreement with measurements independently performed in several laboratories around the world. The understanding of this effect and its adequate correction, e.g. using simple transparent optical media, enables achieving high-quality post-compressed pulses with only minor changes in existing setups. These optimized sources have impact in many fields of science and technology and should enable new and exciting applications in the few- to single-cycle pulse regime. △ Less

Submitted 13 September, 2017; v1 submitted 6 April, 2017; originally announced April 2017.

Journal ref: Scientific Reports 8, Article number: 2256 (2018)

Inline self-diffraction dispersion-scan of over octave-spanning pulses in the single-cycle regime

Authors: M. Canhota, F. Silva, R. Weigand, H. M. Crespo

Abstract: We present an implementation of dispersion-scan based on self-diffraction (SD d-scan) and apply it to the measurement of over octave-spanning sub-4-fs pulses. The results are compared with second-harmonic generation (SHG) d-scan. The efficiency of the SD process is derived theoretically and compared with the spectral response retrieved by the d-scan algorithm. The new SD d-scan has a robust inline… ▽ More We present an implementation of dispersion-scan based on self-diffraction (SD d-scan) and apply it to the measurement of over octave-spanning sub-4-fs pulses. The results are compared with second-harmonic generation (SHG) d-scan. The efficiency of the SD process is derived theoretically and compared with the spectral response retrieved by the d-scan algorithm. The new SD d-scan has a robust inline setup and enables measuring pulses with over-octave spectra, single-cycle durations and wavelength ranges beyond those of SHG crystals, such as the ultraviolet and the deep-ultraviolet. △ Less

Submitted 21 May, 2017; v1 submitted 3 March, 2017; originally announced March 2017.

Comments: 8 pages, 5 figures

Tunable high-harmonic generation by chromatic focusing of few-cycle laser pulses

Authors: Warein Holgado, Carlos Hernández-García, Benjamín Alonso, Miguel Miranda, Francisco Silva, Óscar Varela, Juan Hernández-Toro, Luis Plaja, Helder Crespo, Íñigo J. Sola

Abstract: In this work we study the impact of chromatic focusing of few-cycle laser pulses on high-order harmonic generation (HHG) through analysis of the emitted extreme ultraviolet (XUV) radiation. Chromatic focusing is usually avoided in the few-cycle regime, as the pulse spatio-temporal structure may be highly distorted by the spatiotemporal aberrations. Here, however, we demonstrate it as an additional… ▽ More In this work we study the impact of chromatic focusing of few-cycle laser pulses on high-order harmonic generation (HHG) through analysis of the emitted extreme ultraviolet (XUV) radiation. Chromatic focusing is usually avoided in the few-cycle regime, as the pulse spatio-temporal structure may be highly distorted by the spatiotemporal aberrations. Here, however, we demonstrate it as an additional control parameter to modify the generated XUV radiation. We present experiments where few-cycle pulses are focused by a singlet lens in a Kr gas jet. The chromatic distribution of focal lengths allows us to tune HHG spectra by changing the relative singlet-target distance. Interestingly, we also show that the degree of chromatic aberration needed to this control does not degrade substantially the harmonic conversion efficiency, still allowing for the generation of supercontinua with the chirped-pulse scheme, demonstrated previously for achromatic focussing. We back up our experiments with theoretical simulations reproducing the experimental HHG results depending on diverse parameters (input pulse spectral phase, pulse duration, focus position) and proving that, under the considered parameters, the attosecond pulse train remains very similar to the achromatic case, even showing cases of isolated attosecond pulse generation for near single-cycle driving pulses. △ Less

Submitted 12 May, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Comments: 8 pages, 7 figures

Journal ref: Phys. Rev. A 95, 063823 (2017)

Single-shot implementation of dispersion-scan for the characterization of ultrashort laser pulses

Authors: Davide Fabris, Warein Holgado, Francisco Silva, Tobias Witting, John W. G. Tisch, Helder Crespo

Abstract: We demonstrate a novel, single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than scanning wedges to vary the dispersion as in standard d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a Littrow prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectr… ▽ More We demonstrate a novel, single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than scanning wedges to vary the dispersion as in standard d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a Littrow prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectrometer is used to measure the two-dimensional trace, which is analyzed using the d-scan retrieval algorithm. We compare the single-shot implementation with the standard d-scan for the measurement of sub-3.5-fs pulses from a hollow core fiber pulse compressor. We show that the retrieval algorithm used to extract amplitude and phase of the pulse provides comparable results, proving the validity of the new single-shot implementation down to near single-cycle durations. △ Less

Submitted 2 November, 2015; originally announced November 2015.

Comments: 6 pages, 4 figures

Continuous spectra in high-harmonic generation driven by multicycle laser pulses

Authors: W. Holgado, C. Hernández-García, B. Alonso, M. Miranda, F. Silva, L. Plaja, H. Crespo, I. J. Sola

Abstract: We present observations of the emission of XUV continua in the 20-37 eV region by high harmonic generation (HHG) with $4$-$7\ \mathrm{fs}$ pulses focused onto a Kr gas jet. The underlying mechanism relies on coherent control of the relative delays and phases between individually generated attosecond pulse, achievable by adjusting the chirp of the driving pulses and the interaction geometry. Under… ▽ More We present observations of the emission of XUV continua in the 20-37 eV region by high harmonic generation (HHG) with $4$-$7\ \mathrm{fs}$ pulses focused onto a Kr gas jet. The underlying mechanism relies on coherent control of the relative delays and phases between individually generated attosecond pulse, achievable by adjusting the chirp of the driving pulses and the interaction geometry. Under adequate negative chirp and phase matching conditions, the resulting interpulse interference yields a continuum XUV spectrum, which is due to both microscopic and macroscopic (propagation) contributions. This technique opens the route for modifying the phase of individual attosecond pulses and for the coherent synthesis of XUV continua from multicycle driving laser pulses without the need of an isolated attosecond burst. △ Less

Submitted 7 October, 2015; v1 submitted 15 April, 2015; originally announced April 2015.

Comments: 14 pages, 5 figures. Submitted to Physical Review A

Journal ref: Phys. Rev. A 93, 013816 (2016)

Simultaneous compression and characterization of ultrashort laser pulses using chirped mirrors and glass wedges

Authors: Miguel Miranda, Thomas Fordell, Cord Arnold, Anne L'Huillier, Helder Crespo

Abstract: We present a simple and robust technique to retrieve the phase of ultrashort laser pulses, based on a chirped mirror and glass wedges compressor. It uses the compression system itself as a diagnostic tool, thereby making unnecessary the use of complementary diagnostic tools. We used this technique to compress and characterize 7.1 fs laser pulses from an ultrafast laser oscillator. We present a simple and robust technique to retrieve the phase of ultrashort laser pulses, based on a chirped mirror and glass wedges compressor. It uses the compression system itself as a diagnostic tool, thereby making unnecessary the use of complementary diagnostic tools. We used this technique to compress and characterize 7.1 fs laser pulses from an ultrafast laser oscillator. △ Less

Submitted 13 October, 2011; originally announced October 2011.

Comments: 10 pages, 5 figures

Octave spanning spectra and pulse compression by nondegenerate cascaded four-wave mixing: 2D simulation and experiment

Authors: João L. Silva, Rosa Weigand, Helder M. Crespo

Abstract: We present a theoretical model and respective numerical simulation of cascaded four-wave mixing of femtosecond pulses in bulk chi(3) media, evidencing the importance of two-dimensional interaction geometries in the efficient generation of frequency-converted beams, and in agreement with the experimental results in terms spectral and spatial distribution and efficiency, demonstrating compression… ▽ More We present a theoretical model and respective numerical simulation of cascaded four-wave mixing of femtosecond pulses in bulk chi(3) media, evidencing the importance of two-dimensional interaction geometries in the efficient generation of frequency-converted beams, and in agreement with the experimental results in terms spectral and spatial distribution and efficiency, demonstrating compression without the need of complex amplitude or phase control. △ Less

Submitted 6 May, 2009; originally announced May 2009.

Comments: 12 pages, 5 figures, submitted to Optics Letters

Cascaded Nondegenerate Four-Wave Mixing Technique for High-Power Single-Cycle Pulse Synthesis in the Visible and Ultraviolet Ranges

Authors: Rosa Weigand, J. T. Mendonca, Helder M. Crespo

Abstract: We present a new technique to synthesize high-power single-cycle pulses in the visible and ultraviolet ranges by coherent superposition of a multiband octave-spanning spectrum obtained by highly-nondegenerate cascaded four-wave mixing of femtosecond pulses in bulk isotropic nonresonant media. The generation of coherent spectra spanning over two octaves in bandwidth is experimentally demonstrated… ▽ More We present a new technique to synthesize high-power single-cycle pulses in the visible and ultraviolet ranges by coherent superposition of a multiband octave-spanning spectrum obtained by highly-nondegenerate cascaded four-wave mixing of femtosecond pulses in bulk isotropic nonresonant media. The generation of coherent spectra spanning over two octaves in bandwidth is experimentally demonstrated using a thin fused silica slide. Full characterization of the intervening multicolored fields using frequency-resolved optical gating, where multiple cascaded orders have been measured simultaneously for the first time, supports the possibility of direct synthesis of near-single-cycle 2.2 fs visible-UV pulses without recurring to complex amplitude or phase control, which should enable many applications in science and technology. △ Less

Submitted 17 April, 2009; originally announced April 2009.

Comments: 13 pages, 4 figures. Submitted to Physical Review A

Sub two-cycle soliton-effect pulse compression at 800 nm in Photonic Crystal Fibers

Authors: Marco V. Tognetti, Helder M. Crespo

Abstract: The possibility of soliton self-compression of ultrashort laser pulses down to the few-cycle regime in photonic crystal fibers is numerically investigated. We show that efficient sub-two-cycle temporal compression of nanojoule-level 800 nm pulses can be achieved by employing short (typically 5-mm-long) commercially available photonic crystal fibers and pulse durations of around 100 fs, regardles… ▽ More The possibility of soliton self-compression of ultrashort laser pulses down to the few-cycle regime in photonic crystal fibers is numerically investigated. We show that efficient sub-two-cycle temporal compression of nanojoule-level 800 nm pulses can be achieved by employing short (typically 5-mm-long) commercially available photonic crystal fibers and pulse durations of around 100 fs, regardless of initial linear chirp, and without the need of additional dispersion compensation techniques. We envisage applications in a new generation of compact and efficient sub-two cycle laser pulse sources. △ Less

Submitted 27 October, 2006; originally announced October 2006.

Comments: 16 pages, 6 figures

Dispersion managed mode-locking dynamics in a Ti:Sapphire laser

Authors: Marco V. Tognetti, Helder M. Crespo

Abstract: We present what is to our knowledge the most complete 1-D numerical analysis of the evolution and the propagation dynamics of an ultrashort laser pulse in a Ti:Sapphire laser oscillator. This study confirms the dispersion managed model of mode-locking, and emphasizes the role of the Kerr nonlinearity in generating mode-locked spectra with a smooth and well-behaved spectral phase. A very good agr… ▽ More We present what is to our knowledge the most complete 1-D numerical analysis of the evolution and the propagation dynamics of an ultrashort laser pulse in a Ti:Sapphire laser oscillator. This study confirms the dispersion managed model of mode-locking, and emphasizes the role of the Kerr nonlinearity in generating mode-locked spectra with a smooth and well-behaved spectral phase. A very good agreement with preliminary experimental measurements is found. △ Less

Submitted 14 November, 2005; originally announced November 2005.

Comments: 11 pages, 4 figures, submitted to Optics Letters