-
Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation
Authors:
Jiangbin Zhang,
Moritz H. Futscher,
Vincent Lami,
Felix U. Kosasih,
Changsoon Cho,
Qinying Gu,
Aditya Sadhanala,
Andrew J. Pearson,
Bin Kan,
Giorgio Divitini,
Xiangjian Wan,
Daniel Credgington,
Neil C. Greenham,
Yongsheng Chen,
Caterina Ducati,
Bruno Ehrler,
Yana Vaynzof,
Richard H. Friend,
Artem A. Bakulin
Abstract:
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, cri…
▽ More
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, critical for exciton dissociation and device performance, are largely unexplored. Herein, steady-state and time-resolved optical and electrical techniques are employed to characterize the interfacial trap states. Correlation with the luminescent efficiency of interfacial states and its non-radiative recombination, interfacial trap states are characterized to be about 50% more populated in the sq-BHJ than as-cast BHJ (c-BHJ), which probably limits the device voltage output. Cross-sectional energy-dispersive X-ray spectroscopy and ultraviolet photoemission spectroscopy depth profiling directly vizualize the donor-acceptor vertical stratification with a precision of 1-2 nm. From the proposed "needle" model, the high exciton dissociation efficiency is rationalized. Our study highlights the promise of sequential deposition to fabricate efficient solar cells, and points towards improving the voltage output and overall device performance via eliminating interfacial trap states.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Environmental Control of Triplet Emission in Donor-Bridge-Acceptor Organometallics
Authors:
Jiale Feng,
Lupeng Yang,
Alexander S. Romanov,
Jirawit Ratanapreechachai,
Saul T. E. Jones,
Antti-Pekka M. Reponen,
Mikko Linnolahti,
Timothy J. H. Hele,
Anna Köhler,
Heinz Bässler,
Manfred Bochmann,
Dan Credgington
Abstract:
Carbene-metal-amides (CMAs) are a promising family of donor-bridge-acceptor molecular charge-transfer emitters for organic light-emitting diodes (OLEDs). Here a universal approach is introduced to tune the energy of their charge-transfer emission. A shift of up to 210 meV is achievable in the solid state via dilution in a polar host matrix. The origin of this shift has two components: constraint o…
▽ More
Carbene-metal-amides (CMAs) are a promising family of donor-bridge-acceptor molecular charge-transfer emitters for organic light-emitting diodes (OLEDs). Here a universal approach is introduced to tune the energy of their charge-transfer emission. A shift of up to 210 meV is achievable in the solid state via dilution in a polar host matrix. The origin of this shift has two components: constraint of thermally activated triplet diffusion, and electrostatic interactions between the guest molecules and the polar host. This allows the emission of mid-green CMA archetypes to be blue shifted without chemical modifications. Monte-Carlo simulations based on a Marcus-type transfer integral successfully reproduce the concentration- and temperature-dependent triplet diffusion process, and reveal a substantial shift in the ensemble density of states in polar hosts. In gold-bridged CMAs this substantial shift does not lead to a significant change in luminescence lifetime, thermal activation energy, reorganisation energy or intersystem crossing rate. These discoveries thus offer new experimental and theoretical insight in to the coupling between the singlet and triplet manifolds in these materials. Similar emission tuning can be achieved in related materials where chemical modification is used to modify the charge-transfer energy.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
Highly Efficient Blue Host-Free and Host-Guest Organic Light-Emitting Diodes Based on Carbene-Metal-Amides
Authors:
Patrick J. Conaghan,
Campbell S. B. Matthews,
Florian Chotard,
Saul T. E. Jones,
Neil C. Greenham,
Manfred Bochmann,
Dan Credgington,
Alexander S. Romanov
Abstract:
Carbene-metal-amide type photoemitters based on CF$_3$-substituted carbazolate ligands show sky-blue to deep-blue photoluminescence from charge-transfer excited states. They are suitable for incorporation into organic light-emitting diodes (OLEDs) by thermal vapour deposition techniques, either embedded within a high-triplet-energy host, or used host-free. We report high-efficiency OLEDs with emis…
▽ More
Carbene-metal-amide type photoemitters based on CF$_3$-substituted carbazolate ligands show sky-blue to deep-blue photoluminescence from charge-transfer excited states. They are suitable for incorporation into organic light-emitting diodes (OLEDs) by thermal vapour deposition techniques, either embedded within a high-triplet-energy host, or used host-free. We report high-efficiency OLEDs with emission ranging from yellow to blue (Commission Internationale de l'Éclairage (CIE) coordinates from [0.35, 0.53] to [0.17, 0.17]). The latter show a peak electroluminescence external quantum efficiency (EQE) of 20.9 $\%$ in a polar host. We observe that the relative energies of CT and $^{3}$LE states influence the performance of deep-blue emission from carbene-metal-amide materials. We report prototype host-free blue devices with peak external quantum efficiency of 17.3 $\%$, which maintain high performance at brightness levels of 100 cd m$^{-2}$.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Theoretical description of Carbene-Metal-Amides
Authors:
Timothy J. H. Hele,
Dan Credgington
Abstract:
Carbene-Metal-Amide light-emitting diodes have recently shown internal quantum efficiencies approaching 100%, and there has been substantial debate concerning the cause of their exceptionally high efficiency. Here we present a theoretical description of CMAs, showing how a simple three-atom model can predict the form of the HOMO and LUMO, determine the polarization of transitions and the feasibili…
▽ More
Carbene-Metal-Amide light-emitting diodes have recently shown internal quantum efficiencies approaching 100%, and there has been substantial debate concerning the cause of their exceptionally high efficiency. Here we present a theoretical description of CMAs, showing how a simple three-atom model can predict the form of the HOMO and LUMO, determine the polarization of transitions and the feasibility of spin-orbit coupling, as well as the qualitative dependence of excited state energies and oscillator strength on the twist angle. These results clarify many of the claims concerning CMAs and pave the way for the design of more efficient devices.
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
Highly efficient light-emitting diodes based on intramolecular rotation
Authors:
Dawei Di,
Alexander S. Romanov,
Le Yang,
Saul Jones,
Richard H. Friend,
Mikko Linnolahti,
Manfred Bochmann,
Dan Credgington
Abstract:
The efficiency of an organic light-emitting diode (OLED) is fundamentally governed by the spin of recombining electron-hole pairs (singlet and triplet excitons), since triplets cannot usually emit light. The singlet-triplet energy gap, a key factor for efficient utilization of triplets, is normally positive. Here we show that in a family of materials with amide donor and carbene acceptor moieties…
▽ More
The efficiency of an organic light-emitting diode (OLED) is fundamentally governed by the spin of recombining electron-hole pairs (singlet and triplet excitons), since triplets cannot usually emit light. The singlet-triplet energy gap, a key factor for efficient utilization of triplets, is normally positive. Here we show that in a family of materials with amide donor and carbene acceptor moieties linked by a metal, this energy gap for singlet and triplet excitons with charge-transfer character can be tuned from positive to negative values via the rotation of donor and acceptor about the metal-amide bond. When the gap is close to zero, facile intersystem crossing is possible, enabling efficient emission from singlet excitons. We demonstrate solution-processed LEDs with exceptionally high quantum efficiencies (near-100% internal and >27% external quantum efficiencies), and current and power efficiencies (87 cd/A and 75 lm/W) comparable to, or exceeding, those of state-of-the-art vacuum-processed OLEDs and quantum dot LEDs.
△ Less
Submitted 28 June, 2016;
originally announced June 2016.
-
On the kinetic equation of linear fractional stable motion and applications to modeling the scaling of intermittent bursts
Authors:
N. W. Watkins,
D. Credgington,
R. Sanchez,
S. J. Rosenberg,
S. C. Chapman
Abstract:
Levy flights and fractional Brownian motion (fBm) have become exemplars of the heavy tailed jumps and long-ranged memory widely seen in physics. Natural time series frequently combine both effects, and linear fractional stable motion (lfsm) is a model process of this type, combining alpha-stable jumps with a memory kernel. In contrast complex physical spatiotemporal diffusion processes where bot…
▽ More
Levy flights and fractional Brownian motion (fBm) have become exemplars of the heavy tailed jumps and long-ranged memory widely seen in physics. Natural time series frequently combine both effects, and linear fractional stable motion (lfsm) is a model process of this type, combining alpha-stable jumps with a memory kernel. In contrast complex physical spatiotemporal diffusion processes where both the above effects compete have for many years been modelled using the fully fractional (FF) kinetic equation for the continuous time random walk (CTRW), with power laws in the pdfs of both jump size and waiting time. We derive the analogous kinetic equation for lfsm and show that it has a diffusion coefficient with a power law in time rather than having a fractional time derivative like the CTRW. We discuss some preliminary results on the scaling of burst "sizes" and "durations" in lfsm time series, with applications to modelling existing observations in space physics and elsewhere.
△ Less
Submitted 11 February, 2009; v1 submitted 7 July, 2008;
originally announced July 2008.
-
A kinetic equation for linear fractional stable motion with applications to space plasma physics
Authors:
Nicholas W. Watkins,
Daniel Credgington,
Raul Sanchez,
Sandra C. Chapman
Abstract:
Levy flights and fractional Brownian motion (fBm) have become exemplars of the heavy tailed jumps and long-ranged memory seen in space physics and elsewhere. Natural time series frequently combine both effects, and Linear Fractional Stable Motion (LFSM) is a model process of this type, combining alpha-stable jumps with a memory kernel. In contrast complex physical spatiotemporal diffusion proces…
▽ More
Levy flights and fractional Brownian motion (fBm) have become exemplars of the heavy tailed jumps and long-ranged memory seen in space physics and elsewhere. Natural time series frequently combine both effects, and Linear Fractional Stable Motion (LFSM) is a model process of this type, combining alpha-stable jumps with a memory kernel. In contrast complex physical spatiotemporal diffusion processes where both the above effects compete-dubbed "ambivalent" by Brockmann et al (2006}-have for many years been modelled using the fully fractional (FF) kinetic equation for the continuous time random walk (CTRW), with power laws in the pdfs of both jump size and waiting time. We derive the analogous kinetic equation for LFSM and show that it has a diffusion coefficient with a power law in time rather than having a fractional time derivative like the CTRW. We develop earlier comments by Lutz (2001) on how fBm differs from its fractional time process counterpart. We go on to argue more physically why LFSM and the FFCTRW might indeed be expected to differ, and discuss some preliminary results on the scaling of burst "sizes" and "durations" in LFSM time series, with applications to modelling existing observations in space physics.
△ Less
Submitted 19 March, 2008;
originally announced March 2008.
-
Synthesis of scaling exponents: a fractional Levy model
Authors:
N. W. Watkins,
D. Credgington,
B. Hnat,
S. C. Chapman,
M. P. Freeman,
J. Greenhough
Abstract:
Mandelbrot introduced the concept of fractals to describe the non-Euclidean shape of many aspects of the natural world. In the time series context he proposed the use of fractional Brownian motion (fBm) to model non-negligible temporal persistence, the "Joseph Effect"; and Levy flights to quantify large discontinuities, the "Noah Effect". In space physics, both effects are manifested in the inte…
▽ More
Mandelbrot introduced the concept of fractals to describe the non-Euclidean shape of many aspects of the natural world. In the time series context he proposed the use of fractional Brownian motion (fBm) to model non-negligible temporal persistence, the "Joseph Effect"; and Levy flights to quantify large discontinuities, the "Noah Effect". In space physics, both effects are manifested in the intermittency and long-range correlation which are by now well-established features of geomagnetic indices and their solar wind drivers. In order to capture and quantify the Noah and Joseph effects in one compact model we propose the application of the "bridging" fractional Levy motion (fLm) to space physics. We perform an initial evaluation of some previous scaling results in this paradigm, and show how fLm can model the previously observed exponents. We suggest some new directions for the future.
△ Less
Submitted 12 October, 2007; v1 submitted 7 September, 2005;
originally announced September 2005.