-
Assessing Phase Reconstruction Accuracy for Different Nonlinear Curvature Wavefront Sensor Configurations
Authors:
Stanimir Letchev,
Jonathan Crass,
Justin R. Crepp
Abstract:
The nonlinear curvature wavefront sensor (nlCWFS) offers improved sensitivity for adaptive optics (AO) systems compared to existing wavefront sensors, such as the Shack-Hartmann. The nominal nlCWFS design uses a series of imaging planes offset from the pupil along the optical propagation axis as inputs to a numerically-iterative reconstruction algorithm. Research into the nlCWFS has assumed that t…
▽ More
The nonlinear curvature wavefront sensor (nlCWFS) offers improved sensitivity for adaptive optics (AO) systems compared to existing wavefront sensors, such as the Shack-Hartmann. The nominal nlCWFS design uses a series of imaging planes offset from the pupil along the optical propagation axis as inputs to a numerically-iterative reconstruction algorithm. Research into the nlCWFS has assumed that the device uses four measurement planes configured symmetrically around the optical system pupil. This assumption is not strictly required. In this paper, we perform the first systematic exploration of the location, number, and spatial sampling of measurement planes for the nlCWFS. Our numerical simulations show that the original, symmetric four-plane configuration produces the most consistently accurate results in the shortest time over a broad range of seeing conditions. We find that the inner measurement planes should be situated past the Talbot distance corresponding to a spatial period of $r_0$. The outer planes should be large enough to fully capture field intensity and be situated beyond a distance corresponding to a Fresnel-number-scaled equivalent of $Z\approx50$ km for a $D=0.5$ m pupil with $λ=532$ nm. The minimum spatial sampling required for diffraction-limited performance is 4-5 pixels per $r_0$ as defined in the pupil plane. We find that neither three-plane nor five-plane configurations offer significant improvements compared to the original design. These results can impact future implementations of the nlCWFS by informing sensor design.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Spatial frequency response and sensitivity of the nonlinear curvature wavefront sensor
Authors:
Stanimir Letchev,
Jonathan Crass,
Justin R. Crepp,
Sam Potier
Abstract:
The nonlinear curvature wavefront sensor (nlCWFS) has been shown to be a promising alternative to existing wavefront sensor designs. Theoretical studies indicate that the inherent sensitivity of this device could offer up to a factor of 10 times improvement compared to the widely-used Shack-Hartmann wavefront sensor (SHWFS). The nominal nlCWFS design assumes the use of four detector measurement pl…
▽ More
The nonlinear curvature wavefront sensor (nlCWFS) has been shown to be a promising alternative to existing wavefront sensor designs. Theoretical studies indicate that the inherent sensitivity of this device could offer up to a factor of 10 times improvement compared to the widely-used Shack-Hartmann wavefront sensor (SHWFS). The nominal nlCWFS design assumes the use of four detector measurement planes in a symmetric configuration centered around an optical system pupil plane. However, the exact arrangement of these planes can potentially be optimized to improve aberration sensitivity, and minimize the number of iterations involved in the wavefront reconstruction process, and therefore reduce latency. We present a systematic exploration of the parameter space for optimizing the nlCWFS design. Using a suite of simulation tools, we study the effects of measurement plane position on the performance of the nlCWFS and detector pixel sampling. A variety of seeing conditions are explored, assuming Kolmogorov turbulence. Results are presented in terms of residual wavefront error following reconstruction as well as the number of iterations required for solution convergence. Alternative designs to the symmetric four-plane design are studied, including three-plane and five-plane configurations. Finally, we perform a preliminary investigation of the effects of broadband illumination on sensor performance relevant to astronomy and other applications.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
The iLocater cryostat and thermal control system: enabling extremely precise radial velocity measurements for diffraction-limited spectrographs
Authors:
Jonathan Crass,
Nandini Sadagopan,
Matthew Misch,
Alexa Rizika,
Brian Sands,
Matthew Engstrom,
Justin R. Crepp,
James Smous,
Jeffrey Chilcote,
Louis G. Fantano,
Michael VanSickle,
Frederick R. Hearty,
Matthew J. Nelson
Abstract:
Extremely precise radial velocity (EPRV) measurements are critical for characterizing nearby terrestrial worlds. EPRV instrument precisions of $σ_{\mathrm{RV}} = 1-10\,\mathrm{cm/s}$ are required to study Earth-analog systems, imposing stringent, sub-mK, thermo-mechanical stability requirements on Doppler spectrograph designs. iLocater is a new, high-resolution ($R=190,500$ median) near infrared (…
▽ More
Extremely precise radial velocity (EPRV) measurements are critical for characterizing nearby terrestrial worlds. EPRV instrument precisions of $σ_{\mathrm{RV}} = 1-10\,\mathrm{cm/s}$ are required to study Earth-analog systems, imposing stringent, sub-mK, thermo-mechanical stability requirements on Doppler spectrograph designs. iLocater is a new, high-resolution ($R=190,500$ median) near infrared (NIR) EPRV spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument is one of the first to operate in the diffraction-limited regime enabled by the use of adaptive optics and single-mode fibers. This facilitates affordable optomechanical fabrication of the spectrograph using intrinsically stable materials.
We present the final design and performance of the iLocater cryostat and thermal control system which houses the instrument spectrograph. The spectrograph is situated inside an actively temperature-controlled radiation shield mounted inside a multi-layer-insulation (MLI) lined vacuum chamber. The radiation shield provides sub-mK thermal stability, building on the existing heritage of the Habitable-zone Planet Finder (HPF) and NEID instruments. The instrument operating temperature ($T=80-100\,\mathrm{K}$) is driven by the requirement to minimize detector background and instantaneous coefficient of thermal expansion (CTE) of the materials used for spectrograph fabrication. This combination allows for a reduced thermomechanical impact on measurement precision, improving the scientific capabilities of the instrument.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
The final design of the iLocater spectrograph: An optimized architecture for diffraction-limited EPRV instruments
Authors:
Jonathan Crass,
David Aikens,
Joaquin Mason,
David King,
Justin R. Crepp,
Andrew Bechter,
Eric Bechter,
Mahsa Farsad,
Christian Schwab,
Michael VanSickle
Abstract:
iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into singl…
▽ More
iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into single-mode fibers that illuminate a high spectral resolution (R=190,500 median), cryogenic, diffraction-limited spectrograph. To maximize performance, the spectrograph uses a new design strategy for EPRV instruments, combining intrinsically stable materials for its optomechanical fabrication with precision optical fabrication. This novel combination will enable unique EPRV capabilities for exoplanet and astrophysics studies of the solar neighborhood.
We present the final optical and mechanical designs of the spectrograph system. Ensuring the as-built spectrograph achieves its designed spectral resolution and diffraction-limited performance has required careful control of the end-to-end system wavefront error (WFE) budget. We discuss the efforts undertaken to achieve this goal including minimizing residual WFE in the optical design, assessing diffraction grating WFE performance, optimizing material choices, and requiring precision optical design and fabrication. Our goal is to deliver diffraction-limited performance across the full spectral format, which, combined with intrinsic thermal stability requirements for EPRV science, has driven the selection of silicon optics and Invar optomechanics. The system performance is further optimized using precision (sub-mK) thermal control. This set of design features will allow iLocater to achieve sub-m/s radial velocity precision in the near-infrared, and to serve as the first optimized diffraction-limited spectrograph for EPRV science.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
Characterizing and Mitigating the Impact of Telluric Absorption in Precise Radial Velocities
Authors:
Sharon Xuesong Wang,
Natasha Latouf,
Peter Plavchan,
Bryson Cale,
Cullen Blake,
Étienne Artigau,
Carey M. Lisse,
Jonathan Gagné,
Jonathan Crass,
Angelle Tanner
Abstract:
Precise radial velocity (PRV) surveys are important for the search of Earth analogs around nearby bright stars. Such planets induce a small stellar reflex motion with RV amplitude of $\sim$10 cm/s. Detecting such a small RV signal poses important challenges to instrumentation, data analysis, and the precision of astrophysical models to mitigate stellar jitter. In this work, we investigate an impor…
▽ More
Precise radial velocity (PRV) surveys are important for the search of Earth analogs around nearby bright stars. Such planets induce a small stellar reflex motion with RV amplitude of $\sim$10 cm/s. Detecting such a small RV signal poses important challenges to instrumentation, data analysis, and the precision of astrophysical models to mitigate stellar jitter. In this work, we investigate an important component in the PRV error budget - the spectral contamination from the Earth's atmosphere (tellurics). We characterize the effects of telluric absorption on the RV precision and quantify its contribution to the RV budget over time and across a wavelength range of 350 nm - 2.5$μ$m. We investigate the effectiveness in mitigating tellurics using simulated spectra of a solar twin star with telluric contamination over a year's worth of observations, and we extracted the RVs using two commonly adopted algorithms: dividing out a telluric model before performing cross-correlation or Forward Modeling the observed spectrum incorporating a telluric model. We assume various degrees of cleanness in removing the tellurics, including mimicking the lack of accurate knowledge of the telluric lines by using a mismatched line profile to model the "observed" tellurics. We conclude that the RV errors caused by telluric absorption can be suppressed to close to or even below the photon-limited precision in the optical region, especially in the blue, around 1-10 cm/s. At red through near-infrared wavelengths, however, the residuals of tellurics can induce an RV error on the m/s level even under the most favorable assumptions for telluric removal, leading to significant systematic noise in the RV time series and periodograms. If the red-optical or near-infrared becomes critical in the mitigation of stellar activity, systematic errors from tellurics can be eliminated with a space mission such as EarthFinder.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Extreme Precision Radial Velocity Working Group Final Report
Authors:
Jonathan Crass,
B. Scott Gaudi,
Stephanie Leifer,
Charles Beichman,
Chad Bender,
Gary Blackwood,
Jennifer A. Burt,
John L. Callas,
Heather M. Cegla,
Scott A. Diddams,
Xavier Dumusque,
Jason D. Eastman,
Eric B. Ford,
Benjamin Fulton,
Rose Gibson,
Samuel Halverson,
Raphaëlle D. Haywood,
Fred Hearty,
Andrew W. Howard,
David W. Latham,
Johannes Löhner-Böttcher,
Eric E. Mamajek,
Annelies Mortier,
Patrick Newman,
Peter Plavchan
, et al. (11 additional authors not shown)
Abstract:
Precise mass measurements of exoplanets discovered by the direct imaging or transit technique are required to determine planet bulk properties and potential habitability. Furthermore, it is generally acknowledged that, for the foreseeable future, the Extreme Precision Radial Velocity (EPRV) measurement technique is the only method potentially capable of detecting and measuring the masses and orbit…
▽ More
Precise mass measurements of exoplanets discovered by the direct imaging or transit technique are required to determine planet bulk properties and potential habitability. Furthermore, it is generally acknowledged that, for the foreseeable future, the Extreme Precision Radial Velocity (EPRV) measurement technique is the only method potentially capable of detecting and measuring the masses and orbits of habitable-zone Earths orbiting nearby F, G, and K spectral-type stars from the ground. In particular, EPRV measurements with a precision of better than approximately 10 cm/s (with a few cm/s stability over many years) are required. Unfortunately, for nearly a decade, PRV instruments and surveys have been unable to routinely reach RV accuracies of less than roughly 1 m/s. Making EPRV science and technology development a critical component of both NASA and NSF program plans is crucial for reaching the goal of detecting potentially habitable Earthlike planets and supporting potential future exoplanet direct imaging missions such as the Habitable Exoplanet Observatory (HabEx) or the Large Ultraviolet Optical Infrared Surveyor (LUVOIR). In recognition of these facts, the 2018 National Academy of Sciences (NAS) Exoplanet Science Strategy (ESS) report recommended the development of EPRV measurements as a critical step toward the detection and characterization of habitable, Earth-analog planets. In response to the NAS-ESS recommendation, NASA and NSF commissioned the EPRV Working Group to recommend a ground-based program architecture and implementation plan to achieve the goal intended by the NAS. This report documents the activities, findings, and recommendations of the EPRV Working Group.
△ Less
Submitted 29 July, 2021;
originally announced July 2021.
-
Studying the Impact of Optical Aberrations on Diffraction-Limited Radial Velocity Instruments
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass
Abstract:
Spectrographs nominally contain a degree of quasi-static optical aberrations resulting from the quality of manufactured component surfaces, imperfect alignment, design residuals, thermal effects, and other other associated phenomena involved in the design and construction process. Aberrations that change over time can mimic the line centroid motion of a Doppler shift, introducing radial velocity (…
▽ More
Spectrographs nominally contain a degree of quasi-static optical aberrations resulting from the quality of manufactured component surfaces, imperfect alignment, design residuals, thermal effects, and other other associated phenomena involved in the design and construction process. Aberrations that change over time can mimic the line centroid motion of a Doppler shift, introducing radial velocity (RV) uncertainty that increases time-series variability. Even when instrument drifts are tracked using a precise wavelength calibration source, barycentric motion of the Earth leads to a wavelength shift of stellar light causing a translation of the spectrum across the focal plane array by many pixels. The wavelength shift allows absorption lines to experience different optical propagation paths and aberrations over observing epochs. We use physical optics propagation simulations to study the impact of aberrations on precise Doppler measurements made by diffraction-limited, high-resolution spectrographs. We quantify the uncertainties that cross-correlation techniques introduce in the presence of aberrations and barycentric RV shifts. We find that aberrations which shift the PSF photo-center in the dispersion direction, in particular primary horizontal coma and trefoil, are the most concerning. To maintain aberration-induced RV errors less than 10 cm/s, phase errors for these particular aberrations must be held well below 0.05 waves at the instrument operating wavelength. Our simulations further show that wavelength calibration only partially compensates for instrumental drifts, owing to a behavioral difference between how cross-correlation techniques handle aberrations between starlight versus calibration light. Identifying subtle physical effects that influence RV errors will help ensure that diffraction-limited planet-finding spectrographs are able to reach their full scientific potential.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
On-sky results for the novel integrated micro-lens ring tip-tilt sensor
Authors:
Philipp Hottinger,
Robert J. Harris,
Jonathan Crass,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Brian Sands,
Tim J. Morris,
Alastair G. Basden,
Nazim Ali Bharmal,
Jochen Heidt,
Theodoros Anagnos,
Philip L. Neureuther,
Martin Glück,
Jennifer Power,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with…
▽ More
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling
Authors:
Jonathan Crass,
Andrew Bechter,
Brian Sands,
David L. King,
Ryan Ketterer,
Matthew Engstrom,
Randall Hamper,
Derek Kopon,
James Smous,
Justin R. Crepp,
Manny Montoya,
Oli Durney,
David Cavalieri,
Robert Reynolds,
Michael Vansickle,
Eleanya Onuma,
Joseph Thomes,
Scott Mullin,
Chris Shelton,
Kent Wallace,
Eric Bechter,
Amali Vaz,
Jennifer Power,
Gustavo Rahmer,
Steve Ertel
Abstract:
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, an…
▽ More
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31μm) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
EarthFinder Probe Mission Concept Study: Characterizing nearby stellar exoplanet systems with Earth-mass analogs for future direct imaging
Authors:
Peter Plavchan,
Gautam Vasisht,
Chas Beichman,
Heather Cegla,
Xavier Dumusque,
Sharon Wang,
Peter Gao,
Courtney Dressing,
Fabienne Bastien,
Sarbani Basu,
Thomas Beatty,
Andrew Bechter,
Eric Bechter,
Cullen Blake,
Vincent Bourrier,
Bryson Cale,
David Ciardi,
Jonathan Crass,
Justin Crepp,
Katherine de Kleer,
Scott Diddams,
Jason Eastman,
Debra Fischer,
Jonathan Gagné,
Scott Gaudi
, et al. (30 additional authors not shown)
Abstract:
EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to th…
▽ More
EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to the challenges of PRV measurements at the cm/s level. This new paradigm takes advantage of: 1) broad wavelength coverage from the UV to NIR which is only possible from space to minimize the effects of stellar activity; 2) extremely compact, highly stable, highly efficient spectrometers (R>150,000) which require the diffraction-limited imaging possible only from space over a broad wavelength range; 3) the revolution in laser-based wavelength standards to ensure cm/s precision over many years; 4) a high cadence observing program which minimizes sampling-induced period aliases; 5) exploiting the absolute flux stability from space for continuum normalization for unprecedented line-by-line analysis not possible from the ground; and 6) focusing on the bright stars which will be the targets of future imaging missions so that EarthFinder can use a ~1.5 m telescope.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Characterization of Single-Mode Fiber Coupling at the Large Binocular Telescope
Authors:
Andrew J. Bechter,
Jonathan Crass,
Jonathan Tesch,
Justin R. Crepp,
Eric B. Bechter
Abstract:
Optimizing on-sky single-mode fiber (SMF) injection is an essential part of develo** precise Doppler spectrometers and new astrophotonics technologies. We installed and tested a prototype SMF injection system at the Large Binocular Telescope (LBT) in April 2016. The fiber injection unit was built as part of the de-risking process for a new instrument named iLocater that will use adaptive optics…
▽ More
Optimizing on-sky single-mode fiber (SMF) injection is an essential part of develo** precise Doppler spectrometers and new astrophotonics technologies. We installed and tested a prototype SMF injection system at the Large Binocular Telescope (LBT) in April 2016. The fiber injection unit was built as part of the de-risking process for a new instrument named iLocater that will use adaptive optics (AO) to feed a high resolution, near-infrared spectrograph. In this paper we report Y-band SMF coupling measurements for bright, M-type stars. We compare theoretical expectations for delivered Strehl ratio and SMF coupling to experimental results, and evaluate fundamental effects that limit injection efficiency. We find the pupil geometry of the telescope itself limits fiber coupling to a maximum efficiency of rho_tel=0.78. Further analysis shows the individual impact of AO correction, tip-tilt residuals, and static (non-common-path) aberrations contribute coupling coefficients of rho_Strehl=0.33, rho_tip/tilt=0.84, and rho_ncpa=0.8 respectively. Combined, these effects resulted in an average Y-band SMF efficiency of 0.18 for all observations. Finally, we investigate the impact of fiber coupling on radial velocity (RV) precision as a function of stellar apparent magnitude.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Jonathan Crass,
Martin Glück,
Jörg-Uwe Pott,
Nazim A. Bharmal,
Alastair Basden,
Tim J. Morris,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam d…
▽ More
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Assessing the Suitability of H4RG Near Infrared Detectors for Precise Doppler Radial Velocity Measurements
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass
Abstract:
At wavelengths longwards of the sensitivity of silicon, hybrid structured mercury-cadmium-telluride (HgCdTe) detectors show promise to enable extremely precise radial velocity (RV) measurements of late-type stars. The most advanced near infrared (NIR) detector commercially available is the HAWAII series (HxRG) of NIR detectors. While the quantum efficiency of such devices has been shown to be appr…
▽ More
At wavelengths longwards of the sensitivity of silicon, hybrid structured mercury-cadmium-telluride (HgCdTe) detectors show promise to enable extremely precise radial velocity (RV) measurements of late-type stars. The most advanced near infrared (NIR) detector commercially available is the HAWAII series (HxRG) of NIR detectors. While the quantum efficiency of such devices has been shown to be approx ninety percent, the noise characteristics of these devices, and how they relate to RV measurements, have yet to be quantified. We characterize the various noise sources generated by H4RG arrays using numerical simulations. We present recent results using our end-to-end spectrograph simulator in combination with the HxRG Noise Generator, which emulates the effects of read noise, parameterized by white noise, correlated and uncorrelated pink noise, alternating column noise, and picture frame noise. The effects of nonlinear pixel response, dark current, persistence, and interpixel capacitance (IPC) on RV precision are also considered. Our results have implications for RV error budgets and instrument noise floors that can be achieved with NIR Doppler spectrographs that utilize this kind of detector.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Enabling the next generation of scientific discoveries by embracing photonic technologies
Authors:
Nemanja Jovanovic,
Charles Beichman,
Cullen Blake,
Michael Bottom,
Jeffrey Chilcote,
Carl Coker,
Jonathan Crass,
Justin R. Crepp,
Nick Cvetojevic,
Miguel Daal,
Mario Dagenais,
Kristina Davis,
Richard Dekany,
Don Figer,
Michael P. Fitzgerald,
Pradip Gatkine,
Olivier Guyon,
Sam Halverson,
Robert J. Harris,
Philip M. Hinz,
David Hover,
Andrew W. Howard,
Rebecca Jensen-Clem,
Jeffrey Jewell,
Colby Jurgenson
, et al. (24 additional authors not shown)
Abstract:
The fields of Astronomy and Astrophysics are technology limited, where the advent and application of new technologies to astronomy usher in a flood of discoveries altering our understanding of the Universe (e.g., recent cases include LIGO and the GRAVITY instrument at the VLTI). Currently, the field of astronomical spectroscopy is rapidly approaching an impasse: the size and cost of instruments, e…
▽ More
The fields of Astronomy and Astrophysics are technology limited, where the advent and application of new technologies to astronomy usher in a flood of discoveries altering our understanding of the Universe (e.g., recent cases include LIGO and the GRAVITY instrument at the VLTI). Currently, the field of astronomical spectroscopy is rapidly approaching an impasse: the size and cost of instruments, especially multi-object and integral field spectrographs for extremely large telescopes (ELTs), are pushing the limits of what is feasible, requiring optical components at the very edge of achievable size and performance. For these reasons, astronomers are increasingly looking for innovative solutions like photonic technologies that promote instrument miniaturization and simplification, while providing superior performance.
Astronomers have long been aware of the potential of photonic technologies. The goal of this white paper is to draw attention to key photonic technologies and developments over the past two decades and demonstrate there is new momentum in this arena. We outline where the most critical efforts should be focused over the coming decade in order to move towards realizing a fully photonic instrument. A relatively small investment in this technology will advance astronomical photonics to a level where it can reliably be used to solve challenging instrument design limitations. For the benefit of both ground and space borne instruments alike, an endorsement from the National Academy of Sciences decadal survey will ensure that such solutions are set on a path to their full scientific exploitation, which may one day address a broad range of science cases outlined in the KSPs.
△ Less
Submitted 13 August, 2019; v1 submitted 17 July, 2019;
originally announced July 2019.
-
The need for single-mode fiber-fed spectrographs
Authors:
Jonathan Crass,
Andrew Bechter,
Eric Bechter,
Charles Beichman,
Cullen Blake,
David Coutts,
Tobias Feger,
Sam Halverson,
Robert J. Harris,
Nemanja Jovanovic,
Peter Plavchan,
Christian Schwab,
Gautam Vasisht,
James K. Wallace,
Ji Wang
Abstract:
Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is re…
▽ More
Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is reaching a critical juncture: the measurement sensitivity of existing radial-velocity instruments is becoming the limiting factor in further increasing our knowledge. Without improvement in delivered RV measurement precision, we will not be able to provide dynamical mass and density estimates for some of the most exciting (and consequently most challenging) discoveries expected from new transit missions including the Transiting Exoplanet Survey Satellite (TESS) (Plavchan et al. 2015, Ricker et al. 2014). RV precisions at the 10cm/s level are required to fully confirm earth-like analogues, provide masses and measure density to the 1-5% level from these missions. Additionally, this RV capability will also be important to allow for efficient target selection for facilities such as the James Webb Space Telescope (JWST). A promising way forward to achieve this goal is to use single-mode fibers to inject light to a spectrograph. This mitigates many of the error terms facing current generation seeing-limited RV instruments while simultaneously offering the capability of high resolution spectroscopy within a small optical footprint (Schwab et al. 2012, Crepp 2014, Jovanovic et al. 2016a). We discuss the benefits of this technique, its challenges, and the current status of development.
△ Less
Submitted 24 January, 2019; v1 submitted 22 January, 2019;
originally announced January 2019.
-
A Radial Velocity Error Budget for Single-mode Fiber Doppler Spectrographs
Authors:
Andrew J. Bechter,
Eric B. Bechter Justin R. Crepp,
David King,
Jonathan Crass
Abstract:
Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater'…
▽ More
Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater's design is used to quantify and assess the relative advantages and drawbacks of precise Doppler time series measurements made at the diffraction limit. This framework can be applied for trade-study work to investigate the impact of instrument design decisions on systematic uncertainties encountered in the regime of sub-meter-per-second precision. We find that working at the diffraction-limit through the use of AO and SMF's allows for high spectral resolution and improved instrument stability at the expense of limiting magnitude and longer integration times. Large telescopes equipped with AO alleviates the primary challenges of SMF spectrographs.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Instrument Simulator and Data Reduction Pipeline for the iLocater Spectrograph
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass,
David King
Abstract:
iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to ge…
▽ More
iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to generate extremely precise RV measurements, it differs from conventional Doppler spectrographs, and therefore carries additional risk. To aid with the design of the instrument, we have developed a comprehensive simulator and data reduction pipeline. In this paper, we describe the simulation code and quantify its performance in the context of understanding terms in a RV error budget. We find that the program has an intrinsic precision of $σ< 5$ cm/s, thereby justifying its use in a number of instrument trade studies. The code is written in Matlab and available for download on GitHub.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Micro-lens array as tip-tilt sensor for single-mode fiber coupling
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Martin Glück,
Andrew Bechter,
Jonathan Crass,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fiber…
▽ More
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
EarthFinder: A Precise Radial Velocity Probe Mission Concept For the Detection of Earth-Mass Planets Orbiting Sun-like Stars
Authors:
Peter Plavchan,
Bryson Cale,
Patrick Newman,
Bahaa Hamze,
Natasha Latouf,
William Matzko,
Chas Beichman,
David Ciardi,
Bill Purcell,
Paul Lightsey,
Heather Cegla,
Xavier Dumusque,
Vincent Bourrier,
Courtney Dressing,
Peter Gao,
Gautam Vasisht,
Stephanie Leifer,
Sharon Wang,
Jonathan Gagne,
Samantha Thompson,
Jonathan Crass,
Andrew Bechter,
Eric Bechter,
Cullen Blake,
Sam Halverson
, et al. (18 additional authors not shown)
Abstract:
EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going…
▽ More
EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going to space? What can't be done form the ground? These two questions flow down to these specific tasks for our study - Identify the velocity limit, if any, introduced from micro- and macro-telluric absorption in the Earth's atmosphere; Evaluate the unique advantages that a space-based platform provides to emable the identification and mitigation of stellar acitivity for multi-planet signal recovery.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope
Authors:
Justin R. Crepp,
Jonathan Crass,
David King,
Andrew Bechter,
Eric Bechter,
Ryan Ketterer,
Robert Reynolds,
Philip Hinz,
Derek Kopon,
David Cavalieri,
Louis Fantano,
Corina Koca,
Eleanya Onuma,
Karl Stapelfeldt,
Joseph Thomes,
Sheila Wall,
Steven Macenka,
James McGuire,
Ronald Korniski,
Leonard Zugby,
Joshua Eisner,
B. Scott Gaudi,
Fred Hearty,
Kaitlin Kratter,
Marc Kuchner
, et al. (9 additional authors not shown)
Abstract:
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000)…
▽ More
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
The iLocater cryostat: design and thermal control strategy for precision radial velocity measurements
Authors:
Jonathan Crass,
Louis G. Fantano,
Frederick R. Hearty,
Justin R. Crepp,
Matthew J. Nelson,
Sheila M. Wall,
David A. Cavalieri,
Corina Koca,
David L. King,
Robert O. Reynolds,
Karl R. Stapelfeldt
Abstract:
The current generation of precision radial velocity (RV) spectrographs are seeing-limited instruments. In order to achieve high spectral resolution on 8m class telescopes, these spectrographs require large optics and in turn, large instrument volumes. Achieving milli-Kelvin thermal stability for these systems is challenging but is vital in order to obtain a single measurement RV precision of bette…
▽ More
The current generation of precision radial velocity (RV) spectrographs are seeing-limited instruments. In order to achieve high spectral resolution on 8m class telescopes, these spectrographs require large optics and in turn, large instrument volumes. Achieving milli-Kelvin thermal stability for these systems is challenging but is vital in order to obtain a single measurement RV precision of better than 1m/s. This precision is crucial to study Earth-like exoplanets within the habitable zone. iLocater is a next generation RV instrument being developed for the Large Binocular Telescope. Unlike seeing-limited RV instruments, iLocater uses adaptive optics (AO) to inject a diffraction-limited beam into single-mode fibers. These fibers illuminate the instrument spectrograph, facilitating a diffraction-limited design and a small instrument volume compared to present-day instruments. This enables intrinsic instrument stability and facilitates precision thermal control. We present the current design of the iLocater cryostat which houses the instrument spectrograph and the strategy for its thermal control. The spectrograph is situated within a pair of radiation shields mounted inside an MLI lined vacuum chamber. The outer radiation shield is actively controlled to maintain instrument stability at the sub-mK level and minimize effects of thermal changes from the external environment. An inner shield passively dampens any residual temperature fluctuations and is radiatively coupled to the optical board. To provide intrinsic stability, the optical board and optic mounts will be made from Invar and cooled to 58K to benefit from a zero coefficient of thermal expansion (CTE) value at this temperature. Combined, the small footprint of the instrument spectrograph, the use of Invar, and precision thermal control will allow long-term sub-milliKelvin stability to facilitate precision RV measurements.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
On-sky single-mode fiber coupling measurements at the Large Binocular Telescope
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
Robert O. Reynolds,
Eric Bechter,
Philip Hinz,
Fernando Pedichini,
Michael Foley,
Elliott Runburg,
Eleanya Onuma,
Scott Gaudi,
Giuseppina Micela,
Isabella Pagano,
Charles E. Woodward
Abstract:
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installe…
▽ More
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $μ$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
High spatial resolution optical imaging of the multiple T Tauri system LkHα 262/LkHα 263
Authors:
S. Velasco,
R. Rebolo,
A. Oscoz,
C. Mackay,
L. Labadie,
A. Pérez Garrido,
J. Crass,
A. Díaz-Sánchez,
B. Femenía,
V. González-Escalera,
D. L. King,
R. L. López,
M. Puga,
L. F. Rodríguez-Ramos,
J. Zuther
Abstract:
We report high spatial resolution i' band imaging of the multiple T Tauri system LkH$α$ 262/LkH$α$ 263 obtained during the first commissioning period of the Adaptive Optics Lucky Imager (AOLI) at the 4.2 m William Herschel Telescope, using its Lucky Imaging mode. AOLI images have provided photometry for each of the two components LkH$α$ 263 A and B (0.41 arcsec separation) and marginal evidence fo…
▽ More
We report high spatial resolution i' band imaging of the multiple T Tauri system LkH$α$ 262/LkH$α$ 263 obtained during the first commissioning period of the Adaptive Optics Lucky Imager (AOLI) at the 4.2 m William Herschel Telescope, using its Lucky Imaging mode. AOLI images have provided photometry for each of the two components LkH$α$ 263 A and B (0.41 arcsec separation) and marginal evidence for an unresolved binary or a disc in LkH$α$ 262. The AOLI data combined with previously available and newly obtained optical and infrared imaging show that the three components of LkH$α$ 263 are co-moving, that there is orbital motion in the AB pair, and, remarkably, that LkH$α$ 262-263 is a common proper motion system with less than 1 mas/yr relative motion. We argue that this is a likely five-component gravitationally bounded system. According to BT-settl models the mass of each of the five components is close to 0.4 M$_{\odot}$ and the age is in the range 1-2 Myr. The presence of discs in some of the components offers an interesting opportunity to investigate the formation and evolution of discs in the early stages of multiple very low-mass systems. In particular, we provide tentative evidence that the disc in 263C could be coplanar with the orbit of 263AB.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Design of the iLocater Acquisition Camera Demonstration System
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
David King,
Bo Zhao,
Robert Reynolds,
Philip Hinz,
Jack Brooks,
Eric Bechter
Abstract:
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater…
▽ More
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Adaptive Optics and Lucky Imager (AOLI): presentation and first light
Authors:
S. Velasco,
R. Rebolo,
C. Mackay,
A. Oscoz,
D. L. King,
J. Crass,
A. Díaz-Sánchez,
B. Femenía,
V. González-Escalera,
L. Labadie,
R. L. López,
A. Pérez Garrido,
M. Puga,
L. F. Rodríguez-Ramos,
J. Zuther
Abstract:
In this paper we present the Adaptive Optics Lucky Imager (AOLI), a state-of-the-art instrument which makes use of two well proved techniques for extremely high spatial resolution with ground-based telescopes: Lucky Imaging (LI) and Adaptive Optics (AO).
AOLI comprises an AO system, including a low order non-linear curvature wavefront sensor together with a 241 actuators deformable mirror, a sci…
▽ More
In this paper we present the Adaptive Optics Lucky Imager (AOLI), a state-of-the-art instrument which makes use of two well proved techniques for extremely high spatial resolution with ground-based telescopes: Lucky Imaging (LI) and Adaptive Optics (AO).
AOLI comprises an AO system, including a low order non-linear curvature wavefront sensor together with a 241 actuators deformable mirror, a science array of four 1024x1024 EMCCDs, allowing a 120x120 down to 36x36 arcseconds field of view, a calibration subsystem and a powerful LI software. Thanks to the revolutionary WFS, AOLI shall have the capability of using faint reference stars ({\it I\/} $\sim$ 16.5-17.5), enabling it to be used over a much wider part of the sky than with common Shack-Hartmann AO systems.
This instrument saw first light in September 2013 at William Herschel Telescope. Although the instrument was not complete, these commissioning demonstrated its feasibility, obtaining a FWHM for the best PSF of 0.151$\pm$0.005 arcsec and a plate scale of 55.0$\pm$0.3 mas/pixel. Those observations served us to prove some characteristics of the interesting multiple T Tauri system LkH$α$ 262-263, finding it to be gravitationally bounded. This interesting multiple system mixes the presence of proto-planetary discs, one proved to be double, and the first-time optically resolved pair LkH$α$ 263AB (0.42 arcsec separation).
△ Less
Submitted 12 February, 2015;
originally announced February 2015.
-
High-Resolution Imaging in the Visible on Large Ground-Based Telescopes
Authors:
Craig Mackay,
Rafael Rebolo,
Jonathan Crass,
David L. King,
Lucas Labadie,
Víctor González-Escélera,
Marta Puga,
Antonio Pérez-Garrido,
Roberto López,
Alejandro Oscoz,
Jorge A. Pérez-Prieto,
Luis F. Rodríguez-Ramos,
Sergio Velasco,
Isidro Villó
Abstract:
Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wave…
▽ More
Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.
△ Less
Submitted 1 August, 2014;
originally announced August 2014.
-
Wavefront Phase Retrieval with Non-linear Curvature Sensors
Authors:
P. L. Aisher,
J. Crass,
C. Mackay
Abstract:
Increasing interest in astronomical applications of non-linear curvature wavefront sensors for turbulence detection and correction makes it important to understand how best to handle the data they produce, particularly at low light levels. Algorithms for wavefront phase-retrieval from a four-plane curvature wavefront sensor are developed and compared, with a view to their use for low order phase c…
▽ More
Increasing interest in astronomical applications of non-linear curvature wavefront sensors for turbulence detection and correction makes it important to understand how best to handle the data they produce, particularly at low light levels. Algorithms for wavefront phase-retrieval from a four-plane curvature wavefront sensor are developed and compared, with a view to their use for low order phase compensation in instruments combining adaptive optics and Lucky Imaging. The convergence speed and quality of iterative algorithms is compared to their step-size and techniques for phase retrieval at low photon counts are explored.
Computer simulations show that at low light levels, preprocessing by convolution of the measured signal with a gaussian function can reduce by an order of magnitude the photon flux required for accurate phase retrieval of low-order errors. This facilitates wavefront correction on large telescopes with very faint reference stars.
△ Less
Submitted 28 November, 2012;
originally announced November 2012.
-
AOLI-- Adaptive Optics Lucky Imager: Diffraction Limited Imaging in the Visible on Large Ground-Based Telescopes
Authors:
Craig Mackay,
Rafael Rebolo-López,
Bruno Femenia Castellá,
Jonathan Crass,
David L. King,
Lucas Labadie,
Peter Aisher,
Antonio Pérez Garrido,
Marc Balcells,
Anastasio Díaz-Sánchez,
Jesús Jimenez Fuensalida,
Roberto L. Lopez,
Alejandro Oscoz,
Jorge A. Pérez Prieto,
Luis F. Rodríguez-Ramos,
Isidro Villó
Abstract:
The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors a…
▽ More
The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
The AOLI low-order non-linear curvature wavefront sensor: a method for high sensitivity wavefront reconstruction
Authors:
Jonathan Crass,
Peter Aisher,
Bruno Femenia,
David L. King,
Craig D. Mackay,
Rafael Rebolo-López,
Lucas Labadie,
Antonio Pérez Garrido,
Marc Balcells,
Anastasio Díaz Sánchez,
Jesús Jimenez Fuensalida,
Roberto L. Lopez,
Alejandro Oscoz,
Jorge A. Pérez Prieto,
Luis F. Rodríguez-Ramos,
Isidro Villó
Abstract:
The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the o…
▽ More
The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the optical design of the wavefront sensor where two photoncounting CCDs provide a total of four reference images. Simulations of the optical characteristics of the system are discussed, with their relevance to low and high order AO systems. The development and optimisation of high-speed wavefront reconstruction algorithms are presented. Finally we discuss the results of simulations to demonstrate the sensitivity of the system.
△ Less
Submitted 4 July, 2012;
originally announced July 2012.